Commit Graph

242 Commits

Author SHA1 Message Date
Ville Syrjälä 18442d0878 drm/i915: Fix port_clock and adjusted_mode.clock readout all over
Now that adjusted_mode.clock no longer contains the pixel_multiplier, we
can kill the get_clock() callback and instead do the clock readout
in get_pipe_config().

Also i9xx_crtc_clock_get() can now extract the frequency of the PCH
DPLL, so use it to populate port_clock accurately for PCH encoders.
For DP in port A the encoder is still responsible for filling in
port_clock. The FDI adjusted_mode.clock extraction is kept in place
for some extra sanity checking, but we no longer need to pretend it's
also the port_clock.

In the encoder get_config() functions fill out adjusted_mode.clock
based on port_clock and other details such as the DP M/N values,
HDMI 12bpc and SDVO pixel_multiplier. For PCH encoders we will then
do an extra sanity check to make sure the dotclock we derived from
the FDI configuratiuon matches the one we derive from port_clock.

DVO doesn't exist on PCH platforms, so it doesn't need to anything
but assign adjusted_mode.clock=port_clock. And DDI is HSW only, so
none of the changes apply there.

v2: Use hdmi_reg color format to detect 12bpc HDMI case
v3: Set adjusted_mode.clock for LVDS too
v4: Rename ironlake_crtc_clock_get to ironlake_pch_clock_get,
    eliminate the useless link_freq variable.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-16 22:59:38 +02:00
Ville Syrjälä 3c52f4eb93 drm/i915: Make adjusted_mode.clock non-pixel multiplied
It would be easier if adjusted_mode.clock would be the pipe pixel clock,
and it actually is, except for the cases where pixel_multiplier > 1.

So let's change intel_sdvo to use port_clock as the multiplied clock,
and then we can leave adjusted_mode.clock as pipe pixel clock.

v2: Improve port_clock documentation
    Rebased on top of SDVO pixel_multiplier fixes

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-13 14:52:00 +02:00
Damien Lespiau ce1424078b drm/i915: Remove unused mode_fixup() vfunc of struct intel_dvo_dev_ops
It's totally unused, so remove the last mode_fixup appearance in i915.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-05 21:39:59 +02:00
Daniel Vetter eeb4793779 drm/i915: handle sdvo input pixel multiplier correctly again
The sdvo input timing needs to be the actual mode, the sdvo
encoder automatically adjusts for the need of pixel doubling or
quadrupling. This was lost in pipe config conversion of the
pixel multiplier in

commit 6cc5f341b5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Mar 27 00:44:53 2013 +0100

    drm/i915: add pipe_config->pixel_multiplier

While at it ditch the intel_ prefix from the crtc in
intel_sdvo_mode_set.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-04 17:34:03 +02:00
Guillaume Clement 1ad87e72b5 i915: Fix SDVO potentially turning off randomly
Some Poulsbo cards seem to incorrectly report
SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED instead of
SDVO_CMD_STATUS_PENDING, which causes the display to be turned off.

This could also happen to i915.

Signed-off-by: Guillaume Clement <gclement@baobob.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-22 13:31:36 +02:00
Damien Lespiau 15dcd35021 drm/i915/sdvo: Port the infoframe code to the shared infrastructure
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
Signed-off-by: Thierry Reding <thierry.reding at avionic-design.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-08 14:04:49 +02:00
Daniel Vetter 8aca63aae0 drm/i915/sdvo: use intel_encoder for upcast helper
It's what all callers (except for the destroy callback which is called
from drm core) actually want.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04 21:25:22 +02:00
Chris Wilson 164c859845 drm/i915: Add some debug breadcrumbs to connector detection
Try to decypher detection failures is a little tricker at the moment as
the only indicator of progress is when output_poll_execute() tells us
the result after the connector->detect() has run. This patch adds a
telltale to the start of each detect function so that we can track
progress and associate activity more clearly with each connector.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-24 10:37:07 +02:00
Damien Lespiau 53b9140849 drm/i915: Don't attempt to read an unitialized stack value
If intel_sdvo_get_value() fails here, val is unitialized and the cross
check will compare the pipe config multiplier with a bogus value.

Instead, only set encoder_pixel_multiplier when the sdvo command has
been successful. The cross check will compare the pipe config value with
0 otherwise.

v2: Do the cross check with the initial value of encoder_pixel_multiplier (0)
if the sdvo command fails (and thus keep the warning) (Daniel Vetter)

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-12 17:33:21 +02:00
Daniel Vetter c93f54cf7d drm/i915: pixel multiplier readout support for pch ports
Now that we painstakingly track the shared pch dplls we can finally
implement pixel mutliplier readout support for pch ports, too.

v2: Undo the temporary hack to disable the sdvo pixel multiplier
cross-checking.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-01 11:28:01 +02:00
Dave Airlie 28419261b0 Merge tag 'drm-intel-next-2013-06-18' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Last 3.11 feature pull. I have a few odds bits and pieces and fixes in my
queue, I'll sort them out later on to see what's for 3.11-fixes and what's
for 3.12. But nothing to hold this here up imo.

Highlights:
- more hangcheck work from Mika and Chris to prepare for arb robustness
- trickle feed fixes from Ville
- first parts of the shared pch pll rework, with some basic hw state
  readout and cross-checking (this shuts up the confused pch pll refcount
  WARN that Linus just recently forwarded)
- Haswell audio power well support from Wang Xingchao (alsa bits acked by
  Takashi)
- some cleanups and asserts sprinkling around the plane/gamma enabling
  sequence from Ville
- more gtt refactoring from Ben
- clear up the adjusted->mode vs. pixel clock vs. port clock confusion
- 30bpp support, this time for real hopefully

* tag 'drm-intel-next-2013-06-18' of git://people.freedesktop.org/~danvet/drm-intel: (97 commits)
  drm/i915: remove a superflous semi-colon
  drm/i915: Kill useless "Enable panel fitter" comments
  drm/i915: Remove extra "ring" from error message
  drm/i915: simplify the reduced clock handling for pch plls
  drm/i915: stop killing pfit on i9xx
  drm/i915: explicitly set up PIPECONF (and gamma table) on haswell
  drm/i915: set up PIPECONF explicitly for i9xx/vlv platforms
  drm/i915: set up PIPECONF explicitly on ilk-ivb
  drm/i915: find guilty batch buffer on ring resets
  drm/i915: store ring hangcheck action
  drm/i915: add batch bo to i915_add_request()
  drm/i915: change i915_add_request to macro
  drm/i915: add i915_gem_context_get_hang_stats()
  drm/i915: add struct i915_ctx_hang_stats
  drm/i915: Try harder to disable trickle feed on VLV
  drm/i915: fix up pch pll enabling for pixel multipliers
  drm/i915: hw state readout and cross-checking for shared dplls
  drm/i915: WARN on lack of shared dpll
  drm/i915: split up intel_modeset_check_state
  drm/i915: extract readout_hw_state from setup_hw_state
  ...

Conflicts:
	drivers/gpu/drm/i915/intel_display.c
	drivers/gpu/drm/i915/intel_fb.c
	drivers/gpu/drm/i915/intel_sdvo.c
2013-06-28 09:50:34 +10:00
Dave Airlie 4300a0f8bd Linux 3.10-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEbBAABAgAGBQJRxf9cAAoJEHm+PkMAQRiGMWkH911xM4gRmFgE7SqVW4F4AWBm
 ngcqMqNy9IdqKfibORUUDvVfEa5gjD5ai2quIKpfQiaukbpQJ696H90ijuAkajLn
 DQBrN243s0pzhhc/quWINnWxsFQ613JjdUMUMaD7e9A1aKjYzWrPGt/tSjrFXGCP
 tArTupVzc/iOmnEQDKiROI/Nokq44QJ36aTGPM7n08xMtpKmkCXM+9/UosBteB0O
 HVI33dmjwz7i55fI53XAWyuZCE+gSEnA4z8spJ9LfXso2W14V+roc+GuL6OyeeTI
 pCn/+4niVPb4B0ROZlpyVmdZjbPPcMMEK5o+BSJI68SH6LHZTQh2iVuqYfpSyA==
 =uUH5
 -----END PGP SIGNATURE-----

Merge tag 'v3.10-rc7' into drm-next

Linux 3.10-rc7

The sdvo lvds fix in this -fixes pull

commit c3456fb3e4
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Jun 10 09:47:58 2013 +0200

    drm/i915: prefer VBT modes for SVDO-LVDS over EDID

has a silent functional conflict with

commit 990256aec2
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Fri May 31 12:17:07 2013 +0000

    drm: Add probed modes in probe order

in drm-next. W simply need to add the vbt modes before edid modes, i.e. the
other way round than now.

Conflicts:
	drivers/gpu/drm/drm_prime.c
	drivers/gpu/drm/i915/intel_sdvo.c
2013-06-27 20:40:44 +10:00
Daniel Vetter fdafa9e276 drm/i915: disable sdvo pixel multiplier cross-check for HAS_PCH_SPLIT
We don't (yet) have proper pixel multiplier readout support on pch
split platforms, so the cross check will naturally fail.

v2: Fix spelling in the comment, spotted by Ville.

v3: Since the ordering constraint is pretty tricky between the crtc
get_pipe_config callback and the encoder->get_config callback add a
few comments about it. Prompted by a discussion with Chris Wilson on
irc about why this does work anywhere else than on i915g/gm.

Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-12 16:50:45 +02:00
Damien Lespiau 2f28c50bb3 drm/i915: Initialize active_outputs to never read unitialized values
In case of intel_sdvo_get_active_outputs() failing, we end up reading a
value from the stack.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-10 20:17:41 +02:00
Damien Lespiau 19d415a25e drm/i915: Fix old reference to i830_sdvo_get_capabilities()
It's now intel_sdvo_get_capabilities().

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-10 20:17:10 +02:00
Daniel Vetter c3456fb3e4 drm/i915: prefer VBT modes for SVDO-LVDS over EDID
In

commit 53d3b4d777
Author: Egbert Eich <eich@suse.de>
Date:   Tue Jun 4 17:13:21 2013 +0200

    drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC

Egbert Eich fixed a long-standing bug where we simply used a
non-working i2c controller to read the EDID for SDVO-LVDS panels.
Unfortunately some machines seem to not be able to cope with the mode
provided in the EDID. Specifically they seem to not be able to cope
with a 4x pixel mutliplier instead of a 2x one, which seems to have
been worked around by slightly changing the panels native mode in the
VBT so that the dotclock is just barely above 50MHz.

Since it took forever to notice the breakage it's fairly safe to
assume that at least for SDVO-LVDS panels the VBT contains fairly sane
data. So just switch around the order and use VBT modes first.

v2: Also add EDID modes just in case, and spell Egbert correctly.

v3: Elaborate a bit more about what's going on on Chris' machine.

Cc: Egbert Eich <eich@suse.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65524
Cc: stable@vger.kernel.org
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-10 10:13:34 +02:00
Chris Wilson e596a02ccf drm/i915: Remove dead code from SDVO initialisation
The hotplug_mask is no longer used as the hpd interrupt setup is now
handled in the core.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-10 10:04:21 +02:00
Chris Wilson 7ba220cec0 drm/i915: Enable hotplug interrupts after querying hw capabilities.
sdvo->hotplug_active is initialised during intel_sdvo_setup_outputs(),
and so we never enabled the hotplug interrupts on SDVO as we were
checking too early.

This regression has been introduced somewhere in the hpd rework for
the storm detection and handling starting with

commit 1d843f9de4
Author: Egbert Eich <eich@suse.de>
Date:   Mon Feb 25 12:06:49 2013 -0500

    DRM/I915: Add enum hpd_pin to intel_encoder.

and the follow-up patches to use the new encoder->hpd_pin variable for
the different irq setup functions.

The problem is that encoder->hpd_pin was set up _before_ the output
setup was done and so before we could assess the hotplug capabilities
of the outputs on an sdvo encoder.

Reported-by: Alex Fiestas <afiestas@kde.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58405
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add regression note.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-10 09:59:26 +02:00
Chris Wilson 7ee2aff373 drm/i915: Fix hotplug interrupt enabling for SDVOC
A broken conditional would lead to SDVOC waiting upon hotplug events on
SDVOB - and so miss all activity on its SDVO port.

This regression has been introduced in

commit 1d843f9de4
Author: Egbert Eich <eich@suse.de>
Date:   Mon Feb 25 12:06:49 2013 -0500

    DRM/I915: Add enum hpd_pin to intel_encoder.

References: https://bugs.freedesktop.org/show_bug.cgi?id=58405
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add regression note.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-10 09:58:18 +02:00
Daniel Vetter bb76006379 drm/i915: pipe config quirk infrastructure plus sdvo mode.flags fix
For various reasons the hw state readout might not be able to
faithfully match the hw state:
- broken hw (like the case which motivated this patch here where the
  sdvo encoder does not implemented mandatory functionality
  correctly).
- platforms which are not supported fully with the pipe config
  infrastructure
- if our code doesn't support a given hw configuration natively, e.g.
  special restrictions on the per-pipe panel fitters when they're used
  in high-quality scaling modes.

In all these cases both fastboot and the hw state cross checker need
to be aware of these cases and act accordingly. To be able to do this
add a new quirk flag to the pipe config structure.

The specific case at hand is an sdvo encoder which doesn't implement
the get_timings function, so adjusted_mode flags will be wrong. The
strange thing though is that the encoder _does_ work, even though it
doesn't implement any of the timings functions (so neither get nor
set, neither for input nor output timings).

Not that non-compliant sdvo encoder are any surprise at all ...

v2:
- Don't read random garbage from the dtd if the get_timings call
  failed (suggested by Chris).
- Still check the interlaced flag, that's read out from someplace
  else. We want maximal paranoia, after all.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-06 22:35:44 +02:00
Daniel Vetter 6c49f24180 drm/i915: hw state readout support for pixel_multiplier
Incomplete since ilk+ support needs proper pch dpll tracking first.
SDVO get_config parts based on a patch from Jesse Barnes, but fixed up
to actually work.

v2: Make sure that we call encoder->get_config _after_ we
get_pipe_config to be consistent in both setup_hw_state and the
modeset state checker. Otherwise the clever trick with handling the
pixel mutliplier on i915G/GM where the encoder overrides the default
value of 1 from the crtc get_pipe_config function doesn't work.
Spotted by Imre Deak.

v3: Actually cross-check the pixel mutliplier (but not on pch split
platforms for now). Now actually also tested on a i915G with a sdvo
encoder plugged in.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-06 14:58:36 +02:00
Daniel Vetter ef1b460d1b drm/i915: set default value for config->pixel_multiplier
This way we can simplify the code quite a bit.

Also add a WARN in the sdvo code to complain about a bogus value
and kill the readout code in intel_ddi.c that Jesse sneaked in.
HW state readout for the pixel multiplier will work a bit differently
in the end.

v2: Rebase on top of the fdi pixel mutliplier handling fix.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-05 22:16:22 +02:00
Egbert Eich 53d3b4d777 drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC.
In intel_sdvo_get_lvds_modes() the wrong i2c adapter record is used
for DDC. Thus the code will always have to rely on a LVDS panel
mode supplied by VBT.
In most cases this succeeds, so this didn't get detected for quite
a while.

This regression seems to have been introduced in

commit f899fc64cd
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Jul 20 15:44:45 2010 -0700

    drm/i915: use GMBUS to manage i2c links

Signed-off-by: Egbert Eich <eich@suse.de>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add note about which commit likely introduced this issue.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-04 17:48:43 +02:00
Jani Nikula 6b1c087ba5 drm/i915: document why dvo/sdvo/crt need a special dpms function
In the cloned case, changing just one output but keeping the other, the
pipe state won't change and intel_crtc_update_dpms will be a nop, but we
still need to update the dpms state of the output being changed.

Only dvo, sdvo and crt are cloneable, so only those three have special
dpms functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31 20:54:04 +02:00
Jesse Barnes 045ac3b562 drm/i915: add encoder get_config function v5
We can use this for fetching encoder specific pipe_config state, like
mode flags, adjusted clock, etc.

Just used for mode flags atm, so we can check the pipe config state at
mode set time.

v2: get_config when checking hw state too
v3: fix DVO and LVDS mode flags (Ville)
    get SDVO DTD for flag fetch (Ville)
v4: use input timings (Ville)
    correct command used (Ville)
    remove gen4 check (Ville)
v5: get DDI flag config too

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v4)
Tested-by: Paulo Zanoni <przanoni@gmail.com> (the new hsw ddi stuff)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-21 09:55:19 +02:00
Daniel Vetter e1b73cba13 Linux 3.10-rc2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJRmpexAAoJEHm+PkMAQRiGrRIH/1uWFW38RvaCV/PXm/ia6Z+x
 BfBJfBIvPxGwb4n7aQNQlhU25xkfrPZ6szO4WiBH5/KPH3xYi2I2OZ1AzffkYqMF
 BWkPmsPK6EsTdp16zsi6JtH2aXArG4SpYA7ZamPvDkmfigHuiZg7GlL/9eHTRPNV
 P7Q8JToOrcnP8RoGgNj0uFiQeQbc62Kmoq7WuPtUhVlpQCCCknXgOJiYgz9w6Xe9
 /i79YFS8WRrzAquExT1NbIOh4ZMqB9MvuroaVWy8JDDLUyz7QUvOCe3tCDNguwgi
 FdWvU6nfkdQq5SLaWCWXDE9Rp/pL1MvfBn9vCOwFcp42aw0aQ0PgJVIXvsqufd0=
 =jgDI
 -----END PGP SIGNATURE-----

Merge tag 'v3.10-rc2' into drm-intel-next-queued

Backmerge Linux 3.10-rc2 since the various (rather trivial) conflicts
grew a bit out of hand. intel_dp.c has the only real functional
conflict since the logic changed while dev_priv->edp.bpp was moved
around.

Also squash in a whitespace fixup from Ben Widawsky for
i915_gem_gtt.c, git seems to do something pretty strange in there
(which I don't fully understand tbh).

Conflicts:
	drivers/gpu/drm/i915/i915_reg.h
	drivers/gpu/drm/i915/intel_dp.c

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-21 09:52:16 +02:00
Rodrigo Vivi 41aa344866 drm/i915: Organize VBT stuff inside drm_i915_private
drm_i915_private is getting bigger and bigger when adding new vbt stuff.
So, the better way of getting drm_i915_private organized is to create
a special structure for vbt stuff.

v2: Basically conflicts fixes

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-10 21:56:46 +02:00
Daniel Vetter 09ede5414f drm/i915: make SDVO TV-out work for multifunction devices
We need to track this correctly. While at it shovel the boolean
to track whether the sdvo is in tv mode or not into pipe_config.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36997
Tested-by: Pierre Assal <pierre.assal@verint.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63609
Tested-by: cancan,feng <cancan.feng@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-10 21:56:46 +02:00
Daniel Vetter 7048455929 drm/i915: move sdvo TV clock computation to intel_sdvo.c
We have a very nice infrastructure for this now!

Note that the multifunction sdvo support is pretty neatly broken: We
completely ignore userspace's request for which connector to wire up
with the encoder and just use whatever the last detect callback has
seen.

Not something I'll fix in this patch, but unfortunately something
which is also broken in the DDI code ...

v2: Don't call sdvo_tv_clock twice.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-10 21:56:43 +02:00
Daniel Vetter ae4edb8089 drm/i915: avoid full modeset when changing the color range properties
Automatic color range selection was added in

commit 55bc60db59
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Thu Jan 17 16:31:29 2013 +0200

    drm/i915: Add "Automatic" mode for the "Broadcast RGB" property

but that removed the check to avoid a full modeset if the value is
unchanged. Unfortunately X sets all properties with their current
value at start-up, resulting in some ugly flickering which shouldn't
be there.

v2: Change old_range from bool to uint32_t, spotted by Ville.

v3: Actually git add everything ;-)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-23 13:52:57 +02:00
Egbert Eich 821450c693 drm/i915: (re)init HPD interrupt storm statistics
When an encoder is shared on several connectors there is only
one hotplug line, thus this line needs to be shared among these
connectors.
If HPD detect only works reliably on a subset of those connectors,
we want to poll the others. Thus we need to make sure that storm
detection doesn't mess up the settings for those connectors.
Therefore we store the settings in the intel_connector struct and
restore them from there.
If nothing is set but the encoder has a hpd_pin set we assume this
connector is hotplug capable.
On init/reset we make sure the polled state of the connectors
is (re)set to the default value, the HPD interrupts are marked
enabled.

Signed-off-by: Egbert Eich <eich@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-18 09:43:29 +02:00
Egbert Eich 7a7d1fb79f drm/i915: Fix SDVO connector and encoder get_hw_state functions
The connector associated with the encoder is considered active when the
output associtated with this connector is active on the encoder. The
encoder itself is considered active when either there is an active
output on  it or the  respective SDVO channel is active.
Having active outputs when the SDVO channel is inactive seems to be
inconsistent: such states can be found when intel_modeset_setup_hw_state()
collects the hardware state set by the BIOS.
This inconsistency will be fixed in intel_sanitize_crtc()
(when intel_crtc_update_dpms() is called), this however only happens
when the encoder is associated with a crtc.

This patch also reverts:

     commit bd6946e87a
     Author: Daniel Vetter <daniel.vetter@ffwll.ch>
     Date:   Tue Apr 2 21:30:34 2013 +0200

         drm/i915: Fix sdvo connector get_hw_state function

Signed-off-by: Egbert Eich <eich@suse.de>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63031
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-18 09:43:07 +02:00
Daniel Vetter bd6946e87a drm/i915: Fix sdvo connector get_hw_state function
The active output is only the currently selected one, which does not
imply that it's actually enabled. Since we don't use the sdvo encoder
side dpms support, we need to check whether the chip-side sdvo port is
enabled instead.

v2: Fix up Bugzilla links.

v3: Simplify logic a bit (Chris).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60138
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63031
Cc: Egbert Eich <eich@pdx.freedesktop.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Egbert Eich <eich@pdx.freedesktop.org> (v2)
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-03 11:08:10 +02:00
Daniel Vetter 5d2d38ddca drm/i915: clean up pipe bpp confusion
- gen4 and earlier (save for g4x) only really have a 8bpc pipe, with
  the possibility to dither to 6bpc using the panel fitter
- g4x has hdmi, but no 12 bpc pipe ... !? Clamp hdmi accordingly.
- TV/SDVO out are the only connectors available on platforms with
  a pipe bpp != 8, add code to force the pipe to 8bpc unconditionally.

<rant>
The dither handling on gmch platforms is one giant disaster. I'm hoping
somewhat that vlv enabling will fix this up, but given that the 6bpc
handling for edp was simply added with another quick hack, I don't have
high hopes ...
</rant>

v2: Neither vlv nor g4x have 12bpc pipes. Still set pipe_bpp to 12*3,
but let the crtc code clamp things down to 10bpc on these platforms.

v3: Fix a bpc vs. bpp mixup in the gen4 and earlier pipe_bpp limiter
code.

v4: Drop the hunk in intel_hdmi.c about g4x/vlv 12bpc, it was wrong.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-28 01:09:35 +01:00
Daniel Vetter 50f3b016b0 drm/i915: add pipe_config->limited_color_range
Now that we have a useful struct for this, let's use it. Some neat
pointer-chasing required, but it's all there already.

v2: Rebased on top of the added Haswell limited color range support.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-28 00:50:07 +01:00
Daniel Vetter 5bfe2ac003 drm/i915: add pipe_config->has_pch_encoder
This is used way too often in the enable/disable paths. And will
be even more useful in the future.

Note that correct semantics of this change highly depend upon
correct updating of intel_crtc->config: Like with all other
modeset state, we need to call ->disable with the old config,
but ->mode_set and ->enable with the new config.

v2: Do not yet use the flag in the ->disable callbacks - atm we don't
yet have support for the information stored in the pipe_config in the
hw state readout code, so this will be wrong at boot-up/resume.

v3: Rebased on top of the hdmi/dp ddi encoder merging.

v4: Fixup stupid rebase error which lead to a NULL vfunc deref.

v5: On haswell the VGA port is on the PCH!

v6: s/IS_HASWELL/HAS_DDI/, spotted by Paulo Zanoni. Also add a missing
parameter name in a function declaration.

v7: Don't forget to git add ...

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-28 00:50:07 +01:00
Daniel Vetter 31fac9dca2 drm/i915: drop helper vtable for sdvo encoder
Completely unused by now. Separate patch in case I've missed a
place somewhere which dereferences the helper vtable but actually
shouldn't do so.

v2: Resolve rebase conflict with Egbert Eich's hpd infrastructure
rework.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-28 00:50:06 +01:00
Daniel Vetter 6cc5f341b5 drm/i915: add pipe_config->pixel_multiplier
Used by SDVO (and hopefully, eventually HDMI, if we ever get around
to fixing up the low dotclock CEA modes ...).

This required adding a new encoder->mode_set callback to be able to
pass around the intel_crtc_config.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-28 00:50:06 +01:00
Egbert Eich 4f770a5bee DRM/i915: Get rid if the 'hotplug_supported_mask' in struct drm_i915_private.
Now since we have replaced the bits to show interest in hotplug IRQs
we can go and nuke the 'hotplug_supported_mask'.

Signed-off-by: Egbert Eich <eich@suse.de>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 17:13:43 +01:00
Egbert Eich 1d843f9de4 DRM/I915: Add enum hpd_pin to intel_encoder.
To clean up hotplug support we add a new enum to intel_encoder:
enum hpd_pin. It allows the encoder to request a hpd line but leave
the details which IRQ is responsible on which chipset generation
to i915_irq.c.
This way requesting hotplug support will become really simple on
the encoder/connector level.

Signed-off-by: Egbert Eich <eich@suse.de>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-26 21:50:22 +01:00
Ville Syrjälä 96b219fac3 drm/i915: Set the VIC in AVI infoframe for SDVO
We do this for HDMI already, so I don't know why we wouldn't do
it for SDVO as well.

This is completely untested due to lack of hardware.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23 12:18:05 +01:00
Daniel Vetter 0d4a42f6bd Linux 3.9-rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJRRkrbAAoJEHm+PkMAQRiGy3oH/jrbHinYs0auurANgx4TdtWT
 /WNajstKBqLOJJ6cnTR7sOqwOVlptt65EbbTs+qGyZ2Z2W/Lg0BMenHvNHo4ER8C
 e7UbMdBCSLKBjAMKh1XCoZscGv4Exm8WRH3Vc5yP0Hafj3EzSAVLY1dta9WKKoQi
 bh7D1ErUlbU1zczA1w5YbPF0LqFKRvyZOwebMCCAKAxv5wWAxmbcPNxVR4sufkjg
 k6TkQ2ysgWivZAfy3tJYOcxiEu7ahpZVEuYdlZEJQXHRQUfoNljQlOp4BqKsYUai
 5A0kaf2VpKay/7pkhvTfBBcF/jFJ68pYP6gQ2ThNdr0b5kOiAfMWj030Xyngnhg=
 =iO9t
 -----END PGP SIGNATURE-----

Merge tag 'v3.9-rc3' into drm-intel-next-queued

Backmerge so that I can merge Imre Deak's coalesced sg entries fixes,
which depend upon the new for_each_sg_page introduce in

commit a321e91b6d
Author: Imre Deak <imre.deak@intel.com>
Date:   Wed Feb 27 17:02:56 2013 -0800

    lib/scatterlist: add simple page iterator

The merge itself is just two trivial conflicts:

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-19 09:47:30 +01:00
Mihnea Dobrescu-Balaur 5c67eeb6bf gpu: don't cast kzalloc() return value
Signed-off-by: Mihnea Dobrescu-Balaur <mihneadb@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-11 23:51:54 +01:00
Paulo Zanoni 4f3a8bc7ba drm/i915: rename some HDMI bit definitions
Bits used only on HDMI mode now have HDMI_ prefix instead of SDVO_.
The COLOR_FORMAT bits now have prefixes (and the 12bpc bit is for HDMI
only).

Notice that this patch uncovers a bug on the SDVO code: the
COLOR_RANGE_16_235 bit can only be used if the port is in TMDS mode,
not SDVO mode. This will have to be fixed in a later patch.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-04 23:17:00 +01:00
Paulo Zanoni dc0fa71811 drm/i915: remove duplicated SDVO/HDMI bit definitions
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-04 23:16:57 +01:00
Paulo Zanoni e2debe919a drm/i915: clarify confusion between SDVO and HDMI registers
Some HDMI registers can be used for SDVO, so saying "HDMIB" should be
the same as saying "SDVOB" for a given HW generation. This was not
true and led to confusions and even a regression.

Previously we had:
  - SDVO{B,C} defined as the Gen3+ registers
  - HDMI{B,C,D} and PCH_SDVOB defined as the PCH registers

But now:
  - SDVO{B,C} became GEN3_SDVO{B,C} on SDVO code
  - SDVO{B,C} became GEN4_HDMI{B,C} on HDMI code
  - HDMI{B,C,D} became PCH_HDMI{B,C,D}
  - PCH_SDVOB is still the same thing

v2: Rebase (v1 was sent in May 2012).

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-04 23:14:35 +01:00
Thierry Reding 18316c8c39 drm: Remove duplicate drm_mode_cea_vic()
The same function had already been merged with a different name. Remove
the duplicate one but reuse some of its kerneldoc fragments for the
existing implementation.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-22 08:19:53 +01:00
Daniel Vetter af5676f1f9 drm/i915: rip out helper->disable noop functions
Now that the driver is in control of whether it needs to disable
everything at take-over or not, we can rip this all out.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-14 00:07:54 +01:00
Ville Syrjälä abedc077b4 drm/i915: Provide the quantization range in the AVI infoframe
The AVI infoframe is able to inform the display whether the source is
sending full or limited range RGB data.

As per CEA-861 [1] we must first check whether the display reports the
quantization range as selectable, and if so we can set the approriate
bits in the AVI inforframe.

[1] CEA-861-E - 6.4 Format of Version 2 AVI InfoFrame

v2: Give the Q bits better names, add spec chapter information

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 13:09:45 +01:00
Ville Syrjälä 55bc60db59 drm/i915: Add "Automatic" mode for the "Broadcast RGB" property
Add a new "Automatic" mode to the "Broadcast RGB" range property.
When selected the driver automagically selects between full range and
limited range output.

Based on CEA-861 [1] guidelines, limited range output is selected if the
mode is a CEA mode, except 640x480. Otherwise full range output is used.
Additionally DVI monitors should most likely default to full range
always.

As per DP1.2a [2] DisplayPort should always use full range for 18bpp, and
otherwise will follow CEA-861 rules.

NOTE: The default value for the property will now be "Automatic"
so some people may be affected in case they're relying on the
current full range default.

[1] CEA-861-E - 5.1 Default Encoding Parameters
[2] VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry

v2: Use has_hdmi_sink to check if a HDMI monitor is present
v3: Add information about relevant spec chapters

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 13:09:44 +01:00