Commit Graph

188 Commits

Author SHA1 Message Date
Mike Christie de37920b87 [SCSI] qla4xxx: export iface name
Export the name of iface session is attached to. This is needed
so tools like iscsiadm/iscsistart can match the sessions to
userspace ifaces when rebuilding iscsid's state during boot.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:54 -06:00
Vikas Chaudhary 95d31262b3 [SCSI] qla4xxx: Added support for adapter and firmware reset
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:49 -06:00
Harish Zunjarrao 6085491c34 [SCSI] qla4xxx: Added Get ACB support using BSG
This command is used to read ACB params from firmware

Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:44 -06:00
Harish Zunjarrao 5232f801bd [SCSI] qla4xxx: Added restore factory defaults support using BSG
This command will causes the firmware to update all
configurations to pre-defined factory default settings.

Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:43 -06:00
Vikas Chaudhary 2ada7fc5d4 [SCSI] qla4xxx: added support to update initiator iscsi port
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:40 -06:00
Vikas Chaudhary 91ec7cec4a [SCSI] qla4xxx: Added vendor specific sysfs attributes
Added board_id, fw_state, phy_port_cnt, phy_port_num,
iscsi_func_cnt, hba_model

Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:34 -06:00
Harish Zunjarrao 7c07d139cf [SCSI] qla4xxx: Add read/update NVRAM support for 40xx adapters using BSG
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:33 -06:00
Harish Zunjarrao 8b0402e138 [SCSI] qla4xxx: Add get ACB state support using BSG
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:32 -06:00
Harish Zunjarrao ef7830bb62 [SCSI] qla4xxx: Code cleanup for read/update flash using BSG
- Corrected return status
- Added reset active check
- Removed unused dma_map_sg calls
- Added debug prints on failure

Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:30 -06:00
Vikas Chaudhary 943c157b79 [SCSI] qla4xxx: Added support to update mtu
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:29 -06:00
Manish Rangankar 2a991c2159 [SCSI] qla4xxx: Boot from SAN support for open-iscsi
Hook qla4xxx in fw boot sysfs interface so iscsi tools
can use the info to create boot sessions.

Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:27 -06:00
Manish Rangankar 0e7e85019c [SCSI] qla4xxx: Remove reduandant code after open-iscsi integration.
1. Remove device database entry (ddb) state.
2. Remove device database (DDB) list building.
                With open-iscsi integration the logins to the target devices are
        handled by the user space. So the information of target is now
        maintained in the iscsi_session object. This is handled at
        libiscsi level so there is no need to maintain a list of DDBs in
        the qla4xxx LLD.
3. qla4xxx: Remove add_device_dynamically.
                Since autologin in FW is disabled with open-iscsi integration,
        driver will never get an AEN for which driver has not requested
        a DDB index. So remove the add_device_dynamically function.
4. Remove qla4xxx_tgt_dscvr
        Since firmware autologin is disabled this function will not work.
        Now user has the ability to do the target discovery and login to
        each target individually. Firwmare will not do the login on its own.
5. Remove relogin related code
        All relogin is handled by userspace now. qla4xxx just need to
        notify userspace of a connection failure, this triggers the
        relogin.
6. Remove add_session and alloc_session
        Now qla4xxx uses iscsi_session_setup that would do the necessary
        allocations for session and ddb_entry.

Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com>
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:26 -06:00
Manish Rangankar b3a271a94d [SCSI] qla4xxx: support iscsiadm session mgmt
Add scsi_transport_iscsi hooks in qla4xxx to support
iSCSI session management using iscsiadm.

This patch is based on discussion here
http://groups.google.com/group/open-iscsi/browse_thread/thread/e89fd888baf656a0#

Now users can use iscsiadm to do target discovery and do login/logout to
individual targets using the qla4xxx iSCSI class interface.

This patch leaves some dead code, but to make it easier to review
we are leaving and in the next patch we will remove that old code.

V2 - NOTE: Added code to avoid waiting for AEN during login/logout
in the driver, instead added a kernel to user event
to notify iscsid about login status. Because of this
iscsid will not get blocked.

Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com>
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:24 -06:00
Vikas Chaudhary a355943ca8 [SCSI] qla4xxx: add bsg support
This patch adds bsg support to qla4xxx.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:22 -06:00
Vikas Chaudhary 6ac73e8cb0 [SCSI] qla4xxx: Add VLAN support
Add support to set VLAN and show vlan settings in sysfs

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
[Patch updated to new defines]
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:20 -06:00
Mike Christie f27fb2ef7b [SCSI] iscsi class: sysfs group is_visible callout for iscsi host attrs
The iscsi class currently does not support writable sysfs
attrs for LLD sysfs settings. This patch converts the
iscsi class and driver's host attrs to use the attribute
container sysfs group and the sysfs group's is_visible callout
to be able to support readable or writable sysfs attrs.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:14 -06:00
Mike Christie b78dbba005 [SCSI] iscsi class: remove iface param mask
We can replace the iface param mask with the
attr_is_visible callback.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:12 -06:00
Mike Christie 1d063c1729 [SCSI] iscsi class: sysfs group is_visible callout for session attrs
The iscsi class currently does not support writable sysfs
attrs for LLD sysfs settings. This patch converts the
iscsi class and driver's session attrs to use the attribute
container sysfs group and the sysfs group's is_visible callout
to be able to support readable or writable sysfs attrs.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:06 -06:00
Mike Christie 3128c6c73c [SCSI] iscsi cls: sysfs group is_visible callout for conn attrs
The iscsi class currently does not support writable sysfs
attrs for LLD sysfs settings. This patch converts the
iscsi class and drivers to use the attribute container
sysfs group and the sysfs group's is_visible callout
to be able to support readable or writable sysfs attrs.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:03 -06:00
Vikas Chaudhary ed1086e041 [SCSI] qla4xxx: added support to show multiple iface in sysfs
Add support for default ipv4 and ipv6 ifaces in qla4xxx.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Reviewed-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
[make iface creation dynamic]
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:36:02 -06:00
Vikas Chaudhary 2bab08fc77 [SCSI] qla4xxx: Added new "struct ipaddress_config"
- Move all ipaddress related param to "struct ipaddress_config"
  from "struct scsi_qla_host"
- update function - qla4xxx_update_local_ip()
- Rename IPOPT_IPv4_PROTOCOL_ENABLE to IPOPT_IPV4_PROTOCOL_ENABLE

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
[update for new ISCSI_IFACE values]
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:35:59 -06:00
Mike Christie d00efe3fa8 [SCSI] qla4xxx: add support for set_net_config
Allows user space (iscsiadm) to send down network configuration
parameters for LLD to set private network configuration on the iSCSI
adapters.

Based on patches from Vikas Chaudhary.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27 08:35:58 -06:00
Linus Torvalds 426048313d Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (60 commits)
  [SCSI] lpfc 8.3.24: Extend BSG infrastructure and add link diagnostics
  [SCSI] lpfc 8.3.24: Add resource extent support
  [SCSI] lpfc 8.3.24: Add request-firmware support
  [SCSI] lpfc 8.3.24: Add SR-IOV control
  [SCSI] lpfc 8.3.24: Extended hardware support and support dump images
  [SCSI] lpfc 8.3.24: Miscellaneous Fixes and Corrections
  [SCSI] libsas: Add option for SATA soft reset
  [SCSI] libsas: check dev->gone before submitting sata i/o
  [SCSI] libsas: fix/amend device gone notification in sas_deform_port()
  [SCSI] MAINTAINERS update for SCSI (new email address)
  [SCSI] Fix Ultrastor asm snippet
  [SCSI] osst: fix warning
  [SCSI] osst: wrong index used in inner loop
  [SCSI] aic94xx: world-writable sysfs update_bios file
  [SCSI] MAINTAINERS: Add drivers/target/ entry
  [SCSI] target: Convert TASK_ATTR to scsi_tcq.h definitions
  [SCSI] target: Convert REPORT_LUNs to use int_to_scsilun
  [SCSI] target: Fix task->task_execute_queue=1 clear bug + LUN_RESET OOPs
  [SCSI] target: Fix bug with task_sg chained transport_free_dev_tasks release
  [SCSI] target: Fix interrupt context bug with stats_lock and core_tmr_alloc_req
  ...
2011-05-27 19:52:57 -07:00
Roland Dreier dbee8a0aff x86: remove 32-bit versions of readq()/writeq()
The presense of a writeq() implementation on 32-bit x86 that splits the
64-bit write into two 32-bit writes turns out to break the mpt2sas driver
(and in general is risky for drivers as was discussed in
<http://lkml.kernel.org/r/adaab6c1h7c.fsf@cisco.com>).  To fix this,
revert 2c5643b1c5 ("x86: provide readq()/writeq() on 32-bit too") and
follow-on cleanups.

This unfortunately leads to pushing non-atomic definitions of readq() and
write() to various x86-only drivers that in the meantime started using the
definitions in the x86 version of <asm/io.h>.  However as discussed
exhaustively, this is actually the right thing to do, because the right
way to split a 64-bit transaction is hardware dependent and therefore
belongs in the hardware driver (eg mpt2sas needs a spinlock to make sure
no other accesses occur in between the two halves of the access).

Build tested on 32- and 64-bit x86 allmodconfig.

Link: http://lkml.kernel.org/r/x86-32-writeq-is-broken@mdm.bga.com
Acked-by: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Kashyap Desai <Kashyap.Desai@lsi.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Ravi Anand <ravi.anand@qlogic.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Acked-by: James Bottomley <James.Bottomley@parallels.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:44 -07:00
Vikas Chaudhary 6b278656f2 [SCSI] qla4xxx: Update driver version to 5.02.00-k7
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24 12:40:34 -04:00
Harish Zunjarrao 7ad633c06b [SCSI] qla4xxx: Added vendor specific sysfs attributes
Added fw_version, serial_num, iscsi version and boot loader version
sysfs attributes.

Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24 12:40:23 -04:00
Vikas Chaudhary 8f0722cae6 [SCSI] qla4xxx: Remove host_lock in queuecommand function
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24 12:40:12 -04:00
Lalit Chandivade 1b46807e0b [SCSI] qla4xxx: Remove AF_DPC_SCHEDULED flag from ha.
Since queue_work does not requeue, there is no need to check
if a work is in progress using the AF_DPC_SCHEDULED flag.
queue_work would return if work is pending without adding the
work, do_dpc would again get invoked from qla4xxx_timer if
there is still DPC flags set.

Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24 12:40:02 -04:00
Vikas Chaudhary 977f46a4bb [SCSI] qla4xxx: Don't check FW alive if ISP82XX reset is in progress
Corrected logic to don't check for F/W is alive if reset is already
in progress for ISP82XX

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24 12:39:52 -04:00
Vikas Chaudhary 0160ef1269 [SCSI] qla4xxx: Don't process mbx interrupt unconditionally
Do not process interrupt unconditionally during mailbox processing  which can
lead to spurious interrupt. Mailbox completion are now polled if interrupt are
disabled or wait for interrupt to come in if its enabled

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24 12:39:42 -04:00
Prasanna Mumbai 6d78bd56be [SCSI] qla4xxx: Complete the cmd if sense_len is zero
Complete the cmd if sense length is zero. For cases where sense
data spans across multiple iocb's by FW, we need to hold on to the
I/O (ha->status_srb != NULL) till we have processed them all and
copied the sense data from internal buffer to scsi_cmd sense buffer.

Signed-off-by: Prasanna Mumbai <prasanna.mumbai@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24 12:39:29 -04:00
Vikas Chaudhary 68d92ebf59 [SCSI] qla4xxx: Dump HW/FW reg to figure out what caused FW to be hung for ISP82XX
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24 12:39:20 -04:00
Vikas Chaudhary cb74428ee3 [SCSI] qla4xxx: Updated the reset sequence for ISP82xx
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24 12:38:57 -04:00
Prasanna Mumbai 185f107ef9 [SCSI] qla4xxx: update function qla4xxx_isr_decode_mailbox()
- Added MBOX_ASTS_DUPLICATE_IP AEN handling.
- Update MBOX_AEN_REG_COUNT to 8 so that driver will save status
  of all mbox registers in aen_q

Signed-off-by: Prasanna Mumbai <prasanna.mumbai@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24 12:38:46 -04:00
Linus Torvalds 57d19e80f4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  b43: fix comment typo reqest -> request
  Haavard Skinnemoen has left Atmel
  cris: typo in mach-fs Makefile
  Kconfig: fix copy/paste-ism for dell-wmi-aio driver
  doc: timers-howto: fix a typo ("unsgined")
  perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
  md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
  treewide: fix a few typos in comments
  regulator: change debug statement be consistent with the style of the rest
  Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
  audit: acquire creds selectively to reduce atomic op overhead
  rtlwifi: don't touch with treewide double semicolon removal
  treewide: cleanup continuations and remove logging message whitespace
  ath9k_hw: don't touch with treewide double semicolon removal
  include/linux/leds-regulator.h: fix syntax in example code
  tty: fix typo in descripton of tty_termios_encode_baud_rate
  xtensa: remove obsolete BKL kernel option from defconfig
  m68k: fix comment typo 'occcured'
  arch:Kconfig.locks Remove unused config option.
  treewide: remove extra semicolons
  ...
2011-05-23 09:12:26 -07:00
Justin P. Mattock 70f23fd66b treewide: fix a few typos in comments
- kenrel -> kernel
- whetehr -> whether
- ttt -> tt
- sss -> ss

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-10 10:16:21 +02:00
Christoph Hellwig 5cd049a599 [SCSI] remove cmd->serial_number litter
Stop using cmd->serial_number in printks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-01 10:22:40 -05:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Sarang Radke 5fa8b57313 [SCSI] qla4xxx: Use polling mode for disable interrupt mailbox completion
Disable Interrupt MBX completion will disable the interrupt on
successful completion.  Fixed the bug where driver was waiting for
Interrupt to come in for its completion.  Now driver will poll for
disable interrupt MBX completion.

Signed-off-by: Sarang Radke <sarang.radke@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23 12:53:09 -05:00
Vikas Chaudhary 2dcb0a6104 [SCSI] qla4xxx: Update driver version to 5.02.00-k6
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23 12:53:05 -05:00
Prasanna Mumbai d32cee3c2d [SCSI] qla4xxx: masking required bits of add_fw_options during initialization
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Prasanna Mumbai <prasanna.mumbai@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23 12:53:04 -05:00
Vikas Chaudhary 2d7924e6be [SCSI] qla4xxx: added new function qla4xxx_relogin_all_devices
Move relogin to all devices code from do_dpc to new
fuction qla4xxx_relogin_all_devices()

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23 12:53:04 -05:00
Vikas Chaudhary 3038727c83 [SCSI] qla4xxx: add support for ql4xsess_recovery_tmo cmd line param
Target Session Recovery Timeout

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23 12:53:03 -05:00
Vikas Chaudhary 8bb4033d2b [SCSI] qla4xxx: Add support for ql4xmaxqdepth command line parameter
This provides the flexibility to modify the qdepth based on different
target devices to make the best use of system resources.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23 12:53:02 -05:00
Vikas Chaudhary fc7657c9d9 [SCSI] qla4xxx: cleanup function qla4xxx_process_ddb_changed
We don't need to check ddb old state we can take action
based on ddb new state.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23 12:53:01 -05:00
Karen Higgins 7eece5a084 [SCSI] qla4xxx: Prevent other port reinitialization during remove_adapter
remove ha flag AF_HBA_GOING_AWAY and added flag AF_HA_REMOVAL
to mark the other ISP-4xxx port to indicate that the driver is
being removed, so that the other port will not re-initialize
while in the process of removing the ha due to driver unload
or hba hotplug.

Signed-off-by: Karen Higgins <karen.higgins@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23 12:53:01 -05:00
Vikas Chaudhary 58da51dcfc [SCSI] qla4xxx: remove unused ddb flag DF_NO_RELOGIN
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23 12:53:00 -05:00
Karen Higgins 7edd9a7b28 [SCSI] qla4xxx: cleanup DDB relogin logic during initialization
Driver has capability to add device dynamically and present
them to OS, driver no longer need to wait for DDBs to come
online during driver initialization.
Driver still issues a relogin for DDBs that are not online,
but no longer wait for DDB to come online.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Karen Higgins <karen.higgins@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23 12:52:59 -05:00
Prasanna Mumbai f9880e76fd [SCSI] qla4xxx: Do not retry ISP82XX initialization if H/W state is failed
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Prasanna Mumbai <prasanna.mumbai@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23 12:48:33 -05:00
Prasanna Mumbai 99b53bf50c [SCSI] qla4xxx: Do not send mbox command if FW is in failed state
FW is not able to process mbox command if FW state is failed. This will cause
mbox command to timeout and adapter reset. We have separate function to detect
FW failed state and do adapter reset. So to avoid mbox command timeout, do not
process mbox command in case of FW state failed.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Prasanna Mumbai <prasanna.mumbai@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23 12:48:31 -05:00