Currently, the ghes_poll_func() timer callback is registered with the
TIMER_DEFERRABLE flag. Thus, it is run when the CPU eventually wakes
up together with a subsequent non-deferrable timer and not at the precisely
configured polling interval.
For polling mode, the polling interval configured by firmware should not
be exceeded according to the ACPI spec 6.3, Table 18-394. The definition
of the polling interval is:
"Indicates the poll interval in milliseconds OSPM should use to
periodically check the error source for the presence of an error
condition."
If this interval is extended due to the timer callback deferring, error
records can get lost. Which we are observing on our ThunderX2 platforms.
Therefore, remove the TIMER_DEFERRABLE flag so that the timer callback
executes at the precise interval.
Signed-off-by: Bhaskar Upadhaya <bupadhaya@marvell.com>
[ bp: Subject & changelog ]
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----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=QCEy
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow to print symbolic error names via new %pe modifier.
- Use pr_warn() instead of the remaining pr_warning() calls. Fix
formatting of the related lines.
- Add VSPRINTF entry to MAINTAINERS.
* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
checkpatch: don't warn about new vsprintf pointer extension '%pe'
MAINTAINERS: Add VSPRINTF
tools lib api: Renaming pr_warning to pr_warn
ASoC: samsung: Use pr_warn instead of pr_warning
lib: cpu_rmap: Use pr_warn instead of pr_warning
trace: Use pr_warn instead of pr_warning
dma-debug: Use pr_warn instead of pr_warning
vgacon: Use pr_warn instead of pr_warning
fs: afs: Use pr_warn instead of pr_warning
sh/intc: Use pr_warn instead of pr_warning
scsi: Use pr_warn instead of pr_warning
platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
platform/x86: asus-laptop: Use pr_warn instead of pr_warning
platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
oprofile: Use pr_warn instead of pr_warning
of: Use pr_warn instead of pr_warning
macintosh: Use pr_warn instead of pr_warning
idsn: Use pr_warn instead of pr_warning
ide: Use pr_warn instead of pr_warning
crypto: n2: Use pr_warn instead of pr_warning
...
As said in commit f2c2cbcc35 ("powerpc: Use pr_warn instead of
pr_warning"), removing pr_warning so all logging messages use a
consistent <prefix>_warn style. Let's do it.
Link: http://lkml.kernel.org/r/20191018031850.48498-8-wangkefeng.wang@huawei.com
To: linux-kernel@vger.kernel.org
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek@suse.com: two more indentation fixes]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Destroy ghes_estatus_pool and release memory allocated via vmalloc() on
errors in ghes_estatus_pool_init() in order to avoid memory leaks.
[ bp: do the labels properly and with descriptive names and massage. ]
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1563173924-47479-1-git-send-email-zhangliguang@linux.alibaba.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This is a missed part of the commit 5b53696a30
("ACPI / APEI: Switch to use new generic UUID API"), i.e.
replacing old definition with a global constant variable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Function __ghes_check_estatus() is always called after
__ghes_peek_estatus(), but it is already called in __ghes_peek_estatus().
So we should remove some needless __ghes_check_estatus() calls.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Based on 1 normalized pattern(s):
this file is licensed under gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 22 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.129548190@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* acpi-apei: (29 commits)
efi: cper: Fix possible out-of-bounds access
ACPI: APEI: Fix possible out-of-bounds access to BERT region
MAINTAINERS: Add James Morse to the list of APEI reviewers
ACPI / APEI: Add support for the SDEI GHES Notification type
firmware: arm_sdei: Add ACPI GHES registration helper
ACPI / APEI: Use separate fixmap pages for arm64 NMI-like notifications
ACPI / APEI: Only use queued estatus entry during in_nmi_queue_one_entry()
ACPI / APEI: Split ghes_read_estatus() to allow a peek at the CPER length
ACPI / APEI: Make GHES estatus header validation more user friendly
ACPI / APEI: Pass ghes and estatus separately to avoid a later copy
ACPI / APEI: Let the notification helper specify the fixmap slot
ACPI / APEI: Move locking to the notification helper
arm64: KVM/mm: Move SEA handling behind a single 'claim' interface
KVM: arm/arm64: Add kvm_ras.h to collect kvm specific RAS plumbing
ACPI / APEI: Switch NOTIFY_SEA to use the estatus queue
ACPI / APEI: Move NOTIFY_SEA between the estatus-queue and NOTIFY_NMI
ACPI / APEI: Don't allow ghes_ack_error() to mask earlier errors
ACPI / APEI: Generalise the estatus queue's notify code
ACPI / APEI: Don't update struct ghes' flags in read/clear estatus
ACPI / APEI: Remove spurious GHES_TO_CLEAR check
...
Check that the length recorded in the generic error status block is
within the region before checking the contents of the region itself.
Otherwise it may result in an out-of-bounds access if the system
firmware has generated a status block with an invalid length (larger
than the mapped region). Also move the block_status check so that it
only happens after the block has been verified to be within the mapped
region.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Tyler Baicar <baicar.tyler@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the GHES notification type is SDEI, register the provided event
using the SDEI-GHES helper.
SDEI may be one of two types of event, normal and critical. Critical
events can interrupt normal events, so these must have separate
fixmap slots and locks in case both event types are in use.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that ghes notification helpers provide the fixmap slots and
take the lock themselves, multiple NMI-like notifications can
be used on arm64.
These should be named after their notification method as they can't
all be called 'NMI'. x86's NOTIFY_NMI already is, change the SEA
fixmap entry to be called FIX_APEI_GHES_SEA.
Future patches can add support for FIX_APEI_GHES_SEI and
FIX_APEI_GHES_SDEI_{NORMAL,CRITICAL}.
Because all of ghes.c builds on both architectures, provide a
constant for each fixmap entry that the architecture will never
use.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Each struct ghes has an worst-case sized buffer for storing the
estatus. If an error is being processed by ghes_proc() in process
context this buffer will be in use. If the error source then triggers
an NMI-like notification, the same buffer will be used by
in_nmi_queue_one_entry() to stage the estatus data, before
__process_error() copys it into a queued estatus entry.
Merge __process_error()s work into in_nmi_queue_one_entry() so that
the queued estatus entry is used from the beginning. Use the new
ghes_peek_estatus() to know how much memory to allocate from
the ghes_estatus_pool before reading the records.
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Change since v6:
* Added a comment explaining the 'ack-error, then goto no_work'.
* Added missing esatus-clearing, which is necessary after reading the GAS,
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ghes_read_estatus() reads the record address, then the record's
header, then performs some sanity checks before reading the
records into the provided estatus buffer.
To provide this estatus buffer the caller must know the size of the
records in advance, or always provide a worst-case sized buffer as
happens today for the non-NMI notifications.
Add a function to peek at the record's header to find the size. This
will let the NMI path allocate the right amount of memory before reading
the records, instead of using the worst-case size, and having to copy
the records.
Split ghes_read_estatus() to create __ghes_peek_estatus() which
returns the address and size of the CPER records.
Signed-off-by: James Morse <james.morse@arm.com>
Changes since v7:
* Grammar
* concistent argument ordering
Changes since v6:
* Additional buf_addr = 0 error handling
* Moved checking out of peek-estatus
* Reworded an error message so we can tell them apart
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ghes_read_estatus() checks various lengths in the top-level header to
ensure the CPER records to be read aren't obviously corrupt.
Take the opportunity to make this more user-friendly, printing a
(ratelimited) message about the nature of the header format error.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: James Morse <james.morse@arm.com>
[ rjw: Add missing 'static' ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The NMI-like notifications scribble over ghes->estatus, before
copying it somewhere else. If this interrupts the ghes_probe() code
calling ghes_proc() on each struct ghes, the data is corrupted.
All the NMI-like notifications should use a queued estatus entry
from the beginning, instead of the ghes version, then copying it.
To do this, break up any use of "ghes->estatus" so that all
functions take the estatus as an argument.
This patch just moves these ghes->estatus dereferences into separate
arguments, no change in behaviour. struct ghes becomes unused in
ghes_clear_estatus() as it only wanted ghes->estatus, which we now
pass directly. This is removed.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ghes_copy_tofrom_phys() uses a different fixmap slot depending on in_nmi().
This doesn't work when there are multiple NMI-like notifications, that
could interrupt each other.
As with the locking, move the chosen fixmap_idx to the notification helper.
This only matters for NMI-like notifications, anything calling
ghes_proc() can use the IRQ fixmap slot as its already holding an irqsave
spinlock.
This lets us collapse the ghes_ioremap_pfn_*() helpers.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ghes_copy_tofrom_phys() takes different locks depending on in_nmi().
This doesn't work if there are multiple NMI-like notifications, that
can interrupt each other.
Now that NOTIFY_SEA is always called in the same context, move the
lock-taking to the notification helper. The helper will always know
which lock to take. This avoids ghes_copy_tofrom_phys() taking a guess
based on in_nmi().
This splits NOTIFY_NMI and NOTIFY_SEA to use different locks. All
the other notifications use ghes_proc(), and are called in process
or IRQ context. Move the spin_lock_irqsave() around their ghes_proc()
calls.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that the estatus queue can be used by more than one notification
method, we can move notifications that have NMI-like behaviour over.
Switch NOTIFY_SEA over to use the estatus queue. This makes it behave
in the same way as x86's NOTIFY_NMI.
Remove Kconfig's ability to turn ACPI_APEI_SEA off if ACPI_APEI_GHES
is selected. This roughly matches the x86 NOTIFY_NMI behaviour, and means
each architecture has at least one user of the estatus-queue, meaning it
doesn't need guarding with ifdef.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The estatus-queue code is currently hidden by the NOTIFY_NMI #ifdefs.
Once NOTIFY_SEA starts using the estatus-queue we can stop hiding
it as each architecture has a user that can't be turned off.
Split the existing CONFIG_HAVE_ACPI_APEI_NMI block in two, and move
the SEA code into the gap.
Move the code around ... and changes the stale comment describing
why the status queue is necessary: printk() is no longer the issue,
its the helpers like memory_failure_queue() that aren't nmi safe.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
During ghes_proc() we use ghes_ack_error() to tell an external agent
we are done with these records and it can re-use the memory.
rc may hold an error returned by ghes_read_estatus(), ENOENT causes
us to skip ghes_ack_error() (as there is nothing to ack), but rc may
also by EIO, which gets supressed.
ghes_clear_estatus() is where we mark the records as processed for
non GHESv2 error sources, and already spots the ENOENT case as
buf_paddr is set to 0 by ghes_read_estatus().
Move the ghes_ack_error() call in here to avoid extra logic with
the return code in ghes_proc().
This enables GHESv2 acking for NMI-like error sources. This is safe
as the buffer is pre-mapped by map_gen_v2() before the GHES is added
to any NMI handler lists.
This same pre-mapping step means we can't receive an error from
apei_read()/write() here as apei_check_gar() succeeded when it
was mapped, and the mapping was cached, so the address can't be
rejected at runtime. Remove the error-returns as this is now
called from a function with no return.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Refactor the estatus queue's pool notification routine from
NOTIFY_NMI's handlers. This will allow another notification
method to use the estatus queue without duplicating this code.
Add rcu_read_lock()/rcu_read_unlock() around the list
list_for_each_entry_rcu() walker. These aren't strictly necessary as
the whole nmi_enter/nmi_exit() window is a spooky RCU read-side
critical section.
in_nmi_queue_one_entry() is separate from the rcu-list walker for a
later caller that doesn't need to walk a list.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Punit Agrawal <punit.agrawal@arm.com>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
[ rjw: Drop unnecessary err variable in two places ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ghes_read_estatus() sets a flag in struct ghes if the buffer of
CPER records needs to be cleared once the records have been
processed. This flag value is a problem if a struct ghes can be
processed concurrently, as happens at probe time if an NMI arrives
for the same error source. The NMI clears the flag, meaning the
interrupted handler may never do the ghes_estatus_clear() work.
The GHES_TO_CLEAR flags is only set at the same time as
buffer_paddr, which is now owned by the caller and passed to
ghes_clear_estatus(). Use this value as the flag.
A non-zero buf_paddr returned by ghes_read_estatus() means
ghes_clear_estatus() should clear this address. ghes_read_estatus()
already checks for a read of error_status_address being zero,
so CPER records cannot be written here.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ghes_notify_nmi() checks ghes->flags for GHES_TO_CLEAR before going
on to __process_error(). This is pointless as ghes_read_estatus()
will always set this flag if it returns success, which was checked
earlier in the loop. Remove it.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When CPER records are found the address of the records is stashed
in the struct ghes. Once the records have been processed, this
address is overwritten with zero so that it won't be processed
again without being re-populated by firmware.
This goes wrong if a struct ghes can be processed concurrently,
as can happen at probe time when an NMI occurs. If the NMI arrives
on another CPU, the probing CPU may call ghes_clear_estatus() on the
records before the handler had finished with them.
Even on the same CPU, once the interrupted handler is resumed, it
will call ghes_clear_estatus() on the NMIs records, this memory may
have already been re-used by firmware.
Avoid this stashing by letting the caller hold the address. A
later patch will do away with the use of ghes->flags in the
read/clear code too.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Adding new NMI-like notifications duplicates the calls that grow
and shrink the estatus pool. This is all pretty pointless, as the
size is capped to 64K. Allocate this for each ghes and drop
the code that grows and shrinks the pool.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ghes.c has a memory pool it uses for the estatus cache and the estatus
queue. The cache is initialised when registering the platform driver.
For the queue, an NMI-like notification has to grow/shrink the pool
as it is registered and unregistered.
This is all pretty noisy when adding new NMI-like notifications, it
would be better to replace this with a static pool size based on the
number of users.
As a precursor, move the call that creates the pool from ghes_init(),
into hest.c. Later this will take the number of ghes entries and
consolidate the queue allocations.
Remove ghes_estatus_pool_exit() as hest.c doesn't have anywhere to put
this.
The pool is now initialised as part of ACPI's subsys_initcall():
(acpi_init(), acpi_scan_init(), acpi_pci_root_init(), acpi_hest_init())
Before this patch it happened later as a GHES specific device_initcall().
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ghes code is careful to parse and round firmware's advertised
memory requirements for CPER records, up to a maximum of 64K.
However when ghes_estatus_pool_expand() does its work, it splits
the requested size into PAGE_SIZE granules.
This means if firmware generates 5K of CPER records, and correctly
describes this in the table, __process_error() will silently fail as it
is unable to allocate more than PAGE_SIZE.
Switch the estatus pool to vmalloc() memory. On x86 vmalloc() memory
may fault and be fixed up by vmalloc_fault(). To prevent this call
vmalloc_sync_all() before an NMI handler could discover the memory.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Subsequent patches will split up ghes_read_estatus(), at which
point passing around the 'silent' flag gets annoying. This is to
suppress prink() messages, which prior to commit 42a0bb3f71
("printk/nmi: generic solution for safe printk in NMI"), were
unsafe in NMI context.
This is no longer necessary, remove the flag. printk() messages
are batched in a per-cpu buffer and printed via irq-work, or a call
back from panic().
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
oops_begin() exists to group printk() messages with the oops message
printed by die(). To reach this caller we know that platform firmware
took this error first, then notified the OS via NMI with a 'panic'
severity.
Don't wait for another CPU to release the die-lock before panic()ing,
our only goal is to print this fatal error and panic().
This code is always called in_nmi(), and since commit 42a0bb3f71
("printk/nmi: generic solution for safe printk in NMI"), it has been
safe to call printk() from this context. Messages are batched in a
per-cpu buffer and printed via irq-work, or a call back from panic().
Link: https://patchwork.kernel.org/patch/10313555/
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files to make debugfs_simple_attr.cocci warnings go away.
Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().
Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI 6.2 includes a new definition for a Deferred Machine Check "DMC"
subtable.
The definition of this subtable was included in following commit:
c042933df2 (ACPICA: Add support for new HEST subtable)
However, the HEST parsing function was not updated to include this new
subtable. Therefore, Linux will fail to parse the HEST on systems that
include a DMC entry.
Add the length check for the new DMC subtable so that HEST parsing
doesn't fail on systems that include it.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are new types and helpers that are supposed to be used in new code.
As a preparation to get rid of legacy types and API functions do
the conversion here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In __ghes_panic() clear the block status in the APEI generic
error status block for that generic hardware error source before
calling panic() to prevent a second panic() in the crash kernel
for exactly the same fatal error.
Otherwise ghes_probe(), running in the crash kernel, would see
an unhandled error in the APEI generic error status block and
panic again, thereby precluding any crash dump.
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Signed-off-by: David Arcari <darcari@redhat.com>
Tested-by: Tyler Baicar <baicar.tyler@gmail.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Instead of running with interrupts disabled, use a semaphore. This should
make it easier for backends that may need to sleep (e.g. EFI) when
performing a write:
|BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
|in_atomic(): 1, irqs_disabled(): 1, pid: 2236, name: sig-xstate-bum
|Preemption disabled at:
|[<ffffffff99d60512>] pstore_dump+0x72/0x330
|CPU: 26 PID: 2236 Comm: sig-xstate-bum Tainted: G D 4.20.0-rc3 #45
|Call Trace:
| dump_stack+0x4f/0x6a
| ___might_sleep.cold.91+0xd3/0xe4
| __might_sleep+0x50/0x90
| wait_for_completion+0x32/0x130
| virt_efi_query_variable_info+0x14e/0x160
| efi_query_variable_store+0x51/0x1a0
| efivar_entry_set_safe+0xa3/0x1b0
| efi_pstore_write+0x109/0x140
| pstore_dump+0x11c/0x330
| kmsg_dump+0xa4/0xd0
| oops_exit+0x22/0x30
...
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: 21b3ddd39f ("efi: Don't use spinlocks for efi vars")
Signed-off-by: Kees Cook <keescook@chromium.org>
In later patches we will need to map types to names, so create a
constant table for that which can also be used in different parts of
old and new code. This saves the type in the PRZ which will be useful
in later patches.
Instead of having an explicit PSTORE_TYPE_UNKNOWN, just use ..._MAX.
This includes removing the now redundant filename templates which can use
a single format string. Also, there's no reason to limit the "is it still
compressed?" test to only PSTORE_TYPE_DMESG when building the pstorefs
filename. Records are zero-initialized, so a backend would need to have
explicitly set compressed=1.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
The use of the @ghes argument was removed in a previous commit, but
function signature was not updated to reflect this.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: linux-acpi@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180430213358.8319-1-mr.nuke.me@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Tony reported seeing
"Internal error: Can't find EDAC structure"
when injecting correctable errors due to the fact that ghes_edac would
still load even if the whitelist won't hit. Drop the pr_err() in
ghes_edac_report_mem_error() for now due to the hacky way how ghes_edac
depends on ghes.c.
While at it, make ghes_edac_register() return an error if it doesn't hit
in the whitelist as it is the only sensible thing to do in that
situation.
Furthermore, move the call to it to happen last in ghes_probe() so that
GHES initializing properly does not depend on ghes_edac init at all
as latter is only reporting errors and not required for GHES's proper
functioning.
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Tested-by: Sughosh Ganu <sughosh.ganu@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20180420182015.zao3olss4tvvlxki@agluck-desk
Pull siginfo cleanups from Eric Biederman:
"Long ago when 2.4 was just a testing release copy_siginfo_to_user was
made to copy individual fields to userspace, possibly for efficiency
and to ensure initialized values were not copied to userspace.
Unfortunately the design was complex, it's assumptions unstated, and
humans are fallible and so while it worked much of the time that
design failed to ensure unitialized memory is not copied to userspace.
This set of changes is part of a new design to clean up siginfo and
simplify things, and hopefully make the siginfo handling robust enough
that a simple inspection of the code can be made to ensure we don't
copy any unitializied fields to userspace.
The design is to unify struct siginfo and struct compat_siginfo into a
single definition that is shared between all architectures so that
anyone adding to the set of information shared with struct siginfo can
see the whole picture. Hopefully ensuring all future si_code
assignments are arch independent.
The design is to unify copy_siginfo_to_user32 and
copy_siginfo_from_user32 so that those function are complete and cope
with all of the different cases documented in signinfo_layout. I don't
think there was a single implementation of either of those functions
that was complete and correct before my changes unified them.
The design is to introduce a series of helpers including
force_siginfo_fault that take the values that are needed in struct
siginfo and build the siginfo structure for their callers. Ensuring
struct siginfo is built correctly.
The remaining work for 4.17 (unless someone thinks it is post -rc1
material) is to push usage of those helpers down into the
architectures so that architecture specific code will not need to deal
with the fiddly work of intializing struct siginfo, and then when
struct siginfo is guaranteed to be fully initialized change copy
siginfo_to_user into a simple wrapper around copy_to_user.
Further there is work in progress on the issues that have been
documented requires arch specific knowledge to sort out.
The changes below fix or at least document all of the issues that have
been found with siginfo generation. Then proceed to unify struct
siginfo the 32 bit helpers that copy siginfo to and from userspace,
and generally clean up anything that is not arch specific with regards
to siginfo generation.
It is a lot but with the unification you can of siginfo you can
already see the code reduction in the kernel"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits)
signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr
mm/memory_failure: Remove unused trapno from memory_failure
signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed
signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap
signal: Helpers for faults with specialized siginfo layouts
signal: Add send_sig_fault and force_sig_fault
signal: Replace memset(info,...) with clear_siginfo for clarity
signal: Don't use structure initializers for struct siginfo
signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered
ptrace: Use copy_siginfo in setsiginfo and getsiginfo
signal: Unify and correct copy_siginfo_to_user32
signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32
signal: Unify and correct copy_siginfo_from_user32
signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED
signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h
signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h
signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h
signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h
signal/powerpc: Remove redefinition of NSIGTRAP on powerpc
signal: Move addr_lsb into the _sigfault union for clarity
...
Today 4 architectures set ARCH_SUPPORTS_MEMORY_FAILURE (arm64, parisc,
powerpc, and x86), while 4 other architectures set __ARCH_SI_TRAPNO
(alpha, metag, sparc, and tile). These two sets of architectures do
not interesect so remove the trapno paramater to remove confusion.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The commit f6f8285132 ("pstore: pass allocated memory region back to
caller") changed the check of the return value from erst_read() in
erst_reader() in the following way:
if (len == -ENOENT)
goto skip;
- else if (len < 0) {
- rc = -1;
+ else if (len < sizeof(*rcd)) {
+ rc = -EIO;
goto out;
This introduced another bug: since the comparison with sizeof() is
cast to unsigned, a negative len value doesn't hit any longer.
As a result, when an error is returned from erst_read(), the code
falls through, and it may eventually lead to some weird thing like
memory corruption.
This patch adds the negative error value check more explicitly for
addressing the issue.
Fixes: f6f8285132 (pstore: pass allocated memory region back to caller)
Cc: All applicable <stable@vger.kernel.org>
Tested-by: Jerry Tang <jtang@suse.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Variables len and node_len are redundant and can be removed. Cleans
up clang warning: node_len = GHES_ESTATUS_NODE_LEN(len);
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently the GHES code only calls into the AER driver for
recoverable type errors. This is incorrect because errors of
other severities do not get logged by the AER driver and do not
get exposed to user space via the AER trace event. So, call
into the AER driver for PCIe errors regardless of the severity
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move PCIe AER error handling code into a separate function.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bhaskar Upadhaya