PowerISA 3.0 adds a parition table indexed by LPID. Parition table
allows us to specify the MMU model that will be used for guest and host
translation.
This patch adds support with SLB based hash model (UPRT = 0). What is
required with this model is to support the new hash page table entry
format and also setup partition table such that we use hash table for
address translation.
We don't have segment table support yet.
In order to make sure we don't load KVM module on Power9 (since we don't
have kvm support yet) this patch also disables KVM on Power9.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add structs and #defines related to the radix MMU partition table
format. We also add a ppc_md callback for updating a partition table
entry.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Start moving code that is generic between radix and hash to book3s64
specific headers from the book3s64 hash specific one.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The radix variant is going to require a flush_tlb_range(). With
flush_tlb_range() added, ptep_clear_flush_young() is the same as the
generic version. So drop the powerpc specific variant.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The radix variant is going to require a flush_pmd_tlb_range(). With
flush_pmd_tlb_range() added, pmdp_clear_flush_young() is the same as the
generic version. So drop the powerpc specific variant.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PowerISA 3.0 introduces two pte bits with the below meaning for radix:
00 -> Normal Memory
01 -> Strong Access Order (SAO)
10 -> Non idempotent I/O (Cache inhibited and guarded)
11 -> Tolerant I/O (Cache inhibited)
We drop the existing WIMG bits in the Linux page table in favour of the
above constants. We loose _PAGE_WRITETHRU with this conversion. We only
use writethru via pgprot_cached_wthru() which is used by
fbdev/controlfb.c which is Apple control display and also PPC32.
With respect to _PAGE_COHERENCE, we have been marking hpte always
coherent for some time now. htab_convert_pte_flags() always added
HPTE_R_M.
NOTE: KVM changes need closer review.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use a helper instead of open coding with constants. A later patch will
drop the WIMG bits and use PowerISA 3.0 defines.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PS3 had used a PPP bit hack to implement a read only mapping in the
kernel area. Since we are bolting the ioremap area, it used the pte
flags _PAGE_PRESENT | _PAGE_USER to get a PPP value of 0x3 there by
resulting in a read only mapping. This means the area can be accessed by
user space, but kernel will never return such an address to user space.
But we can do better by implementing a read only kernel mapping using
PPP bits 0b110.
This also allows us to do read only kernel mapping for radix in later
patches.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PTE_RPN_SHIFT is actually page size dependent. Even though PowerISA 3.0
expects only the lower 12 bits to be zero, we will always find the pages
to be PAGE_SHIFT aligned. In case of hash config, this also allows us to
use the additional 3 bits to track pte specific information. We need
to make sure we use these bits only for hash specific pte flags.
For both 4K and 64K config, pte now can hold 57 bits address.
Inorder to keep things simpler, drop PTE_RPN_SHIFT and PTE_RPN_SIZE and
specify the 57 bit detail explicitly.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
_PAGE_PRIVILEGED means the page can be accessed only by the kernel. This
is done to keep pte bits similar to PowerISA 3.0 Radix PTE format. User
pages are now marked by clearing _PAGE_PRIVILEGED bit.
Previously we allowed the kernel to have a privileged page in the lower
address range (USER_REGION). With this patch such access is denied.
We also prevent a kernel access to a non-privileged page in higher
address range (ie, REGION_ID != 0).
Both the above access scenarios should never happen.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We have a common declaration in pte-common.h Add a book3s specific one
and switch to pte_user() in callchain.c. In a subsequent patch we will
switch _PAGE_USER to _PAGE_PRIVILEGED in the book3s version only.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In a subsequent patch we want to add a second definition of pte_user().
Before we do that, make the signature clear, ie. it takes a pte_t and
returns bool.
We move it up inside the existing #ifndef __ASSEMBLY__ block, but
otherwise it's a straight conversion.
Convert the call in settlbcam(), which passes an unsigned long, to pass
a pte_t.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Subpage protection used to depend on the _PAGE_USER bit to implement no
access mode. This patch switches that to use _PAGE_RWX. We clear Read,
Write and Execute access from the pte instead of clearing _PAGE_USER
now. This was done so that we can switch to _PAGE_PRIVILEGED in a later
patch.
subpage_protection() returns pte bits that need to be cleared. Instead
of updating the interface to handle no-access in a separate way, it
appears simpler to clear RWX acecss to indicate no access.
We still don't insert hash ptes for no access implied by !_PAGE_RWX.
Hence we should not get PROT_FAULT with change.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This splits the _PAGE_RW bit into _PAGE_READ and _PAGE_WRITE. It also
removes the dependency on _PAGE_USER for implying read only. Few things
to note here is that, we have read implied with write and execute
permission. Hence we should always find _PAGE_READ set on hash pte
fault.
We still can't switch PROT_NONE to !(_PAGE_RWX). Auto numa depends on
marking a prot none pte _PAGE_WRITE. (For more details look at
b191f9b106 "mm: numa: preserve PTE write permissions across a NUMA
hinting fault")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We can avoid doing endian conversions by using pte_raw() in pxx_same().
The swap of the constant (_PAGE_HPTEFLAGS) should be done at compile
time by the compiler.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Traditionally Power server machines have used the Hashed Page Table MMU
mode. In this mode Linux manages its own tree of nested page tables,
aka. "the Linux page tables", which are not used by the hardware
directly, and software loads translations into the hash page table for
use by the hardware.
Power ISA 3.0 defines a new MMU mode, known as Radix Tree Translation,
where the hardware can directly operate on the Linux page tables.
However the hardware requires that the page tables be in big endian
format.
To accommodate this, switch the pgtable types to __be64 and add
appropriate endian conversions.
Because we will be supporting a single kernel binary that boots using
either radix or hash mode, we always store the Linux page tables big
endian, even in hash mode where they are not actually used by the
hardware.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Fix sparse errors, flesh out change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We have five locations in 64-bit hash MMU code that do a cmpxchg() of a
PTE. Currently doing it inline OK, but in a future patch we will be
converting the PTEs to __be64 in some configs. In that case we will need
casts at every cmpxchg() site in order to keep sparse happy.
So move the logic into a helper, this is a reasonably nice cleanup on
its own.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pmd_hugepage_update() is inside #ifdef CONFIG_TRANSPARENT_HUGEPAGE. THP
can only be enabled if PPC_BOOK3S_64=y && PPC_64K_PAGES=y, aka. hash64.
On hash64 we always define PTE_ATOMIC_UPDATES to 1, meaning the #ifdef
in pmd_hugepage_update() is unnecessary, so drop it.
That is also the only use of PTE_ATOMIC_UPDATES in any of the hash code,
meaning we no longer need to #define it at all in the hash headers.
Note it's still #defined and used in the nohash code.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Testing done by Paul Mackerras has shown that with a modern compiler
there is no negative effect on code generation from enabling
STRICT_MM_TYPECHECKS.
So remove the option, and always use the strict type definitions.
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The driver was requesting for a writethrough mapping. But with those
flags we will end up with an SAO mapping because we now have memory
conherence always enabled. ie, the existing mapping will end up with a
WIMG value 0b1110 which is Strong Access Order.
Update this to use cache inhibitted guarded mapping.
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Minor cleanup patch to replace the raw event hex values in
power8-pmu.c with #defines.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In the ppc64 big endian ABI, function symbols point to function
descriptors. The symbols which point to the function entry points
have a dot in front of the function name. Consequently, when the
ftrace filter mechanism searches for the symbol corresponding to
an entry point address, it gets the dot symbol.
As a result, ftrace filter users have to be aware of this ABI detail on
ppc64 and prepend a dot to the function name when setting the filter.
The perf probe command insulates the user from this by ignoring the dot
in front of the symbol name when matching function names to symbols,
but the sysfs interface does not. This patch makes the ftrace filter
mechanism do the same when searching symbols.
Fixes the following failure in ftracetest's kprobe_ftrace.tc:
.../kprobe_ftrace.tc: line 9: echo: write error: Invalid argument
That failure is on this line of kprobe_ftrace.tc:
echo _do_fork > set_ftrace_filter
This is because there's no _do_fork entry in the functions list:
# cat available_filter_functions | grep _do_fork
._do_fork
This change introduces no regressions on the perf and ftracetest
testsuite results.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Sparse doesn't seem to be passing -maltivec around properly, leading
to lots of errors:
.../include/altivec.h:34:2: error: Use the "-maltivec" flag to enable PowerPC AltiVec support
arch/powerpc/lib/xor_vmx.c:27:16: error: Expected ; at end of declaration
arch/powerpc/lib/xor_vmx.c:27:16: error: got signed
arch/powerpc/lib/xor_vmx.c:60:9: error: No right hand side of '*'-expression
arch/powerpc/lib/xor_vmx.c:60:9: error: Expected ; at end of statement
arch/powerpc/lib/xor_vmx.c:60:9: error: got v1_in
...
arch/powerpc/lib/xor_vmx.c:87:9: error: too many errors
Only include the altivec.h header for non-__CHECKER__ builds.
For builds with __CHECKER__, make up some stubs instead, as
suggested by Balbir. (The vector size of 16 is arbitrary.)
Suggested-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Tested-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The copy paste facility introduced in POWER9 provides an optimised
mechanism for a userspace application to copy a cacheline. This is
provided by a pair of instructions, copy and paste, while a third,
cp_abort (copy paste abort), provides a clean up of the state in case of
a failure.
The copy instruction will read a 128 byte cacheline and store it in an
internal buffer. The subsequent paste instruction will store this
internal buffer to memory and set a CR field if the paste succeeds.
Since the state of the copy paste buffer is internal (and not
architecturally visible), in the unlikely event of a context switch, the
state cannot be stored and the paste should therefore fail.
The cp_abort instruction exists to fail and clean up any such
interrupted copy paste sequence and is to be called by the kernel as
part of the context switch. Doing so prevents data from a preceding copy
in one process leaking into the paste of another.
This code enables use of the cp_abort instruction if a supported
processor is detected.
NOTE: this is for userspace only, not in kernel, and does not deal
with KVM guests.
Patch created with much assistance from Michael Neuling
<mikey@neuling.org>
Signed-off-by: Chris Smart <chris@distroguy.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
mpic_init_sys() currently doesn't check whether
subsys_system_register() succeeded or not. Check the return code of
subsys_system_register() and clean up if there's an error.
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Found by smatch.
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The current code will set _PAGE_USER to the access flags for any
fault address, because the ~ operation will be true for all address we
take a fault on. But setting _PAGE_USER also means that the fault will
be handled only if the page table have _PAGE_USER set. Hence there is
no security hole with the current code.
Now if it is an user space access, then the change in this patch really
don't have an impact because we have (!ctx->kernel) set true
and we take the if condition true.
Now kernel context created fault on an address in the kernel range
will result in a fault loop because we will not insert the
hash pte due to access and pte permission mismatch. This patch fix
the above issue.
Fixes: f204e0b8ce ("cxl: Driver code for powernv PCIe based cards for userspace access")
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PSL designers recommend a larger value for the mmio hang pulse, 256 us
instead of 1 us. The CAIA architecture states that it needs to be
smaller than 1/2 of the RTOS timeout set in the PHB for outbound
non-posted transactions, which is still (easily) the case here.
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Tested-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Tested-by: Manoj Kumar <manoj@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Failure to synchronize the PSL timebase currently prevents the
initialization of the cxl card, thus rendering the card useless. This
is too extreme for a feature which is rarely used, if at all. No
hardware AFUs or software is currently using PSL timebase.
This patch still tries to synchronize the PSL timebase when the card
is initialized, but ignores the error if it can't. Instead, it reports
a status via /sys.
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add sample_reg_mask array with pt_regs registers.
This is needed for printing supported regs ( -I? option).
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The perf infrastructure uses a bit mask to find out valid registers to
display. Define a register mask for supported registers defined in
uapi/asm/perf_regs.h. The bit positions also correspond to register IDs
which is used by perf infrastructure to fetch the register values.
CONFIG_HAVE_PERF_REGS enables sampling of the interrupted machine state.
Signed-off-by: Anju T <anju@linux.vnet.ibm.com>
[mpe: Add license, use CONFIG_PPC64, fix 32-bit build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The enum definition assigns an 'id' to each register in "struct pt_regs"
of arch/powerpc. The order of these values in the enum definition are
based on the order of members in pt_regs.
Signed-off-by: Anju T <anju@linux.vnet.ibm.com>
[mpe: Rename LNK to LINK, use _UAPI_ASM for include guards]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The __end_handlers marker was intended to mark down upto code that gets
called from exception prologs. But that hasn't kept pace with code
changes. Case in point, slb_miss_realmode being called from exception
prolog code but isn't below __end_handlers marker. So, __end_handlers
marker is as good as a comment but could be misleading at times if it
isn't in sync with the code, as is the case now. So, let us avoid this
confusion by having a better comment and removing __end_handlers marker
altogether.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some of the interrupt vectors on 64-bit POWER server processors are only
32 bytes long (8 instructions), which is not enough for the full
first-level interrupt handler. For these we need to branch to an
out-of-line (OOL) handler. But when we are running a relocatable kernel,
interrupt vectors till __end_interrupts marker are copied down to real
address 0x100. So, branching to labels (ie. OOL handlers) outside this
section must be handled differently (see LOAD_HANDLER()), considering
relocatable kernel, which would need at least 4 instructions.
However, branching from interrupt vector means that we corrupt the
CFAR (come-from address register) on POWER7 and later processors as
mentioned in commit 1707dd16. So, EXCEPTION_PROLOG_0 (6 instructions)
that contains the part up to the point where the CFAR is saved in the
PACA should be part of the short interrupt vectors before we branch out
to OOL handlers.
But as mentioned already, there are interrupt vectors on 64-bit POWER
server processors that are only 32 bytes long (like vectors 0x4f00,
0x4f20, etc.), which cannot accomodate the above two cases at the same
time owing to space constraint. Currently, in these interrupt vectors,
we simply branch out to OOL handlers, without using LOAD_HANDLER(),
which leaves us vulnerable when running a relocatable kernel (eg. kdump
case). While this has been the case for sometime now and kdump is used
widely, we were fortunate not to see any problems so far, for three
reasons:
1. In almost all cases, production kernel (relocatable) is used for
kdump as well, which would mean that crashed kernel's OOL handler
would be at the same place where we end up branching to, from short
interrupt vector of kdump kernel.
2. Also, OOL handler was unlikely the reason for crash in almost all
the kdump scenarios, which meant we had a sane OOL handler from
crashed kernel that we branched to.
3. On most 64-bit POWER server processors, page size is large enough
that marking interrupt vector code as executable (see commit
429d2e83) leads to marking OOL handler code from crashed kernel,
that sits right below interrupt vector code from kdump kernel, as
executable as well.
Let us fix this by moving the __end_interrupts marker down past OOL
handlers to make sure that we also copy OOL handlers to real address
0x100 when running a relocatable kernel.
This fix has been tested successfully in kdump scenario, on an LPAR with
4K page size by using different default/production kernel and kdump
kernel.
Also tested by manually corrupting the OOL handlers in the first kernel
and then kdump'ing, and then causing the OOL handlers to fire - mpe.
Fixes: c1fb6816fb ("powerpc: Add relocation on exception vector handlers")
Cc: stable@vger.kernel.org
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add the kconfig logic & assembly support for handling live patched
functions. This depends on DYNAMIC_FTRACE_WITH_REGS, which in turn
depends on the new -mprofile-kernel ftrace ABI, which is only supported
currently on ppc64le.
Live patching is handled by a special ftrace handler. This means it runs
from ftrace_caller(). The live patch handler modifies the NIP so as to
redirect the return from ftrace_caller() to the new patched function.
However there is one particularly tricky case we need to handle.
If a function A calls another function B, and it is known at link time
that they share the same TOC, then A will not save or restore its TOC,
and will call the local entry point of B.
When we live patch B, we replace it with a new function C, which may
not have the same TOC as A. At live patch time it's too late to modify A
to do the TOC save/restore, so the live patching code must interpose
itself between A and C, and do the TOC save/restore that A omitted.
An additionaly complication is that the livepatch code can not create a
stack frame in order to save the TOC. That is because if C takes > 8
arguments, or is varargs, A will have written the arguments for C in
A's stack frame.
To solve this, we introduce a "livepatch stack" which grows upward from
the base of the regular stack, and is used to store the TOC & LR when
calling a live patched function.
When the patched function returns, we retrieve the real LR & TOC from
the livepatch stack, restore them, and pop the livepatch "stack frame".
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
In order to support live patching we need to maintain an alternate
stack of TOC & LR values. We use the base of the stack for this, and
store the "live patch stack pointer" in struct thread_info.
Unlike the other fields of thread_info, we can not statically initialise
that value, so it must be done at run time.
This patch just adds the code to support that, it is not enabled until
the next patch which actually adds live patch support.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Add the powerpc specific livepatch definitions. In particular we provide
a non-default implementation of klp_get_ftrace_location().
This is required because the location of the mcount call is not constant
when using -mprofile-kernel (which we always do for live patching).
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When livepatch tries to patch a function it takes the function address
and asks ftrace to install the livepatch handler at that location.
ftrace will look for an mcount call site at that exact address.
On powerpc the mcount location is not the first instruction of the
function, and in fact it's not at a constant offset from the start of
the function. To accommodate this add a hook which arch code can
override to customise the behaviour.
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In order to support live patching on powerpc we would like to call
ftrace_location_range(), so make it global.
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The kfree() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix bogus memsets pointed out by sparse:
linux-v4.3/drivers/macintosh/rack-meter.c:157:15: warning: memset with byte count of 0
linux-v4.3/drivers/macintosh/rack-meter.c:158:15: warning: memset with byte count of 0
Probably "&" is mistyped "*"; use ARRAY_SIZE to make it more safe.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Limit idle ticks to total ticks. This prevents the annoying rackmeter
leds fully ON / OFF blinking state that happens on fully idling
G5 Xserve systems.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Sometimes when sparse warns about undefined symbols, it isn't
because they should have 'static' added, it's because they're
overriding __weak symbols defined elsewhere, and the header has
been missed.
Fix a few of them by adding appropriate headers.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As sparse suggests, these should be made static.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The POWER8NVL chip has two CAPI ports. Configure the PSL to route
data to the port corresponding to the CAPP unit.
Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch assigns numbers to OPAL_MSG macros of enum opal_msg_type
to prevent accidental insertion of any new value in between and thus
break OPAL API. This is also helpful while backporting mainline kernel
changes to distros which run downlevel kernel and thus don't have all
OPAL messages defined, avoiding unnecessary bugs due to enum values
order mismatch.
Signed-off-by: Vipin K Parashar <vipin@linux.vnet.ibm.com>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We'd like folks working on drivers for powerpc to also Cc linuxppc-dev,
so we can be aware of what's going on in drivers and/or review the
changes.
So add patterns to the powerpc MAINTAINERS section to catch some of the
drivers we're interested in.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Aneesh Kumar K.V