Commit 5ace77e0b4 ("nios2: remove __ioremap") removed the following code,
with the argument that cacheflag is always 0 and the expression would
therefore always be false.
if (IS_MAPPABLE_UNCACHEABLE(phys_addr) &&
IS_MAPPABLE_UNCACHEABLE(last_addr) &&
!(cacheflag & _PAGE_CACHED))
return (void __iomem *)(CONFIG_NIOS2_IO_REGION_BASE + phys_addr);
This did not take the "!" in the expression into account. Result is that
nios2 images no longer boot. Restoring the removed code fixes the problem.
Fixes: 5ace77e0b4 ("nios2: remove __ioremap")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Bunch of random nouveau fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv56Am90okV334eXgxDuK228sb9UJxMiOYjNAMShvvv4cg@mail.gmail.com
Pull MD fixes from Song.
* 'md-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: make sure desc_nr less than MD_SB_DISKS
md: raid1: check rdev before reference in raid1_sync_request func
raid5: need to set STRIPE_HANDLE for batch head
- Fix mode matching for drivers not using picture_aspect_ratio
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHF6rntfJ3enn8gh8cywAJXLcr3kFAl3xXZwACgkQcywAJXLc
r3kz0gf/cPrbZYz2kcAh+uCWdEDiISIM9kTfTUyhuR/5F5IOIPCpGT2JgqbDC28p
1uCgPJ9opnTSBHb3vSuUwHF5kK7nhf870XlJnY33IykciSjpd/EBdIbeEPFu5HlF
lHn6Mg6U1bSaZL+4jvyKQNyQfwOgOGwdwXVRTVLuVne01rhiQnAKQ76FWKQ4Zqlb
Av7bTZLJb5doMCpOptulduxE5RYlJ8wbSBNCBWTdc+29HS+9ae/1g0XneVn5trFv
D1jNCoRghEXmFJeTOZjksnnszTAkI5gzSkCGGqY5chFSB5gtB0imQZYIgc1cSDhN
NZPboEWuavN04fE1QJQJYwGr1ebAwA==
=Qwc3
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2019-12-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- Expand dma-buf MAINTAINER scope
- Fix mode matching for drivers not using picture_aspect_ratio
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211212107.GA257983@art_vandelay
-----BEGIN PGP SIGNATURE-----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=ldOp
-----END PGP SIGNATURE-----
Merge tag 'afs-fixes-20191211' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"Fixes for AFS plus one patch to make debugging easier:
- Fix how addresses are matched to server records. This is currently
incorrect which means cache invalidation callbacks from the server
don't necessarily get delivered correctly. This causes stale data
and metadata to be seen under some circumstances.
- Make the dynamic root superblock R/W so that rpm/dnf can reapply
the SELinux label to it when upgrading the Fedora filesystem-afs
package. If the filesystem is R/O, this fails and the upgrade
fails.
It might be better in future to allow setxattr from an LSM to
bypass the R/O protections, if only for pseudo-filesystems.
- Fix the parsing of mountpoint strings. The mountpoint object has to
have a terminal dot, whereas the source/device string passed to
mount should not. This confuses type-forcing suffix detection
leading to the wrong volume variant being mounted.
- Make lookups in the dynamic root superblock for creation events
(such as mkdir) fail with EOPNOTSUPP rather than something like
EEXIST. The dynamic root only allows implicit creation by the
->lookup() method - and only if the target cell exists.
- Fix the looking up of an AFS superblock to include the cell in the
matching key - otherwise all volumes with the same ID number are
treated as the same thing, irrespective of which cell they're in.
- Show the volume name of each volume in the volume records displayed
in /proc/net/afs/<cell>/volumes. This proved useful in debugging as
it provides a way to map the volume IDs to names, where the names
are what appear in /proc/mounts"
* tag 'afs-fixes-20191211' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Show volume name in /proc/net/afs/<cell>/volumes
afs: Fix missing cell comparison in afs_test_super()
afs: Fix creation calls in the dynamic root to fail with EOPNOTSUPP
afs: Fix mountpoint parsing
afs: Fix SELinux setting security label on /afs
afs: Fix afs_find_server lookups for ipv4 peers
If we submit an unknown opcode and have fd == -1, io_op_needs_file()
will return true as we default to needing a file. Then when we go and
assign the file, we find the 'fd' invalid and return -EBADF. We really
should be returning -EINVAL for that case, as we normally do for
unsupported opcodes.
Change io_op_needs_file() to have the following return values:
0 - does not need a file
1 - does need a file
< 0 - error value
and use this to pass back the right value for this invalid case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix improper return value of listxattr() with no xattr;
- Keep up documentation with latest code.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCXfELlBYcZ2FveGlhbmcy
NUBodWF3ZWkuY29tAAoJEDk3MdwfteYEtUABAN164UwGU9QKEsqgZQcmbz23qXSJ
QDR8r/ch2LxzXKkVAQDXCNU+ol6jkiapLcTvsXEjBk8sUxsCEVnmZ36jru+TBA==
=kRp9
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-5.5-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Mainly address a regression reported by David recently observed
together with overlayfs due to the improper return value of
listxattr() without xattr. Update outdated expressions in document as
well.
Summary:
- Fix improper return value of listxattr() with no xattr
- Keep up documentation with latest code"
* tag 'erofs-for-5.5-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: update documentation
erofs: zero out when listxattr is called with no xattr
- Removal of code I accidentally applied when doing a minor fix up
to a patch, and then using "git commit -a --amend", which pulled
in some other changes I was playing with.
- Remove an used variable in trace_events_inject code
- Fix to function graph tracer when it traces a ftrace direct function.
It will now ignore tracing a function that has a ftrace direct
tramploine attached. This is needed for eBPF to use the ftrace direct
code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXfD/thQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoo2AP4j7ONw7BTmMyo+GdYqPPntBeDnClHK
vfMKrgK1j5BxYgEA7LgkwuUT9bcyLjfJVcyfeW67rB2PtmovKTWnKihFOwI=
=DZ6N
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Remove code I accidentally applied when doing a minor fix up to a
patch, and then using "git commit -a --amend", which pulled in some
other changes I was playing with.
- Remove an used variable in trace_events_inject code
- Fix function graph tracer when it traces a ftrace direct function.
It will now ignore tracing a function that has a ftrace direct
tramploine attached. This is needed for eBPF to use the ftrace direct
code.
* tag 'trace-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix function_graph tracer interaction with BPF trampoline
tracing: remove set but not used variable 'buffer'
module: Remove accidental change of module_enable_x()
There's no need to separately check for signals while inside the locked
region, since we're going to do "wait_event_interruptible()" right
afterwards anyway, and the error handling is much simpler there.
The check for whether we had already read anything was also redundant,
since we no longer do the odd merging of reads when there are pending
writers.
But perhaps more importantly, this adds commentary about why we still
need to wake up possible writers even though we didn't read any data,
and why we can skip all the finishing touches now if we get a signal (or
had a signal pending) while waiting for more data.
[ This is a split-out cleanup from my "make pipe IO use exclusive wait
queues" thing, which I can't apply because it triggers a nasty bug in
the GNU make jobserver - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
amdgpu is MIT licensed.
Fixes: ec8f24b7fa ("treewide: Add SPDX license identifier - Makefile/Kconfig")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For super_90_load, we need to make sure 'desc_nr' less
than MD_SB_DISKS, avoiding invalid memory access of 'sb->disks'.
Fixes: 228fc7d76d ("md: avoid invalid memory access for array sb->dev_roles")
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
In raid1_sync_request func, rdev should be checked before reference.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
With commit 6ce220dd2f ("raid5: don't set
STRIPE_HANDLE to stripe which is in batch list"), we don't want to set
STRIPE_HANDLE flag for sh which is already in batch list.
However, the stripe which is the head of batch list should set this flag,
otherwise panic could happen inside init_stripe at BUG_ON(sh->batch_head),
it is reproducible with raid5 on top of nvdimm devices per Xiao oberserved.
Thanks for Xiao's effort to verify the change.
Fixes: 6ce220dd2f ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list")
Reported-by: Xiao Ni <xni@redhat.com>
Tested-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Show the name of each volume in /proc/net/afs/<cell>/volumes to make it
easier to work out the name corresponding to a volume ID. This makes it
easier to work out which mounts in /proc/mounts correspond to which volume
ID.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Fix missing cell comparison in afs_test_super(). Without this, any pair
volumes that have the same volume ID will share a superblock, no matter the
cell, unless they're in different network namespaces.
Normally, most users will only deal with a single cell and so they won't
see this. Even if they do look into a second cell, they won't see a
problem unless they happen to hit a volume with the same ID as one they've
already got mounted.
Before the patch:
# ls /afs/grand.central.org/archive
linuxdev/ mailman/ moin/ mysql/ pipermail/ stage/ twiki/
# ls /afs/kth.se/
linuxdev/ mailman/ moin/ mysql/ pipermail/ stage/ twiki/
# cat /proc/mounts | grep afs
none /afs afs rw,relatime,dyn,autocell 0 0
#grand.central.org:root.cell /afs/grand.central.org afs ro,relatime 0 0
#grand.central.org:root.archive /afs/grand.central.org/archive afs ro,relatime 0 0
#grand.central.org:root.archive /afs/kth.se afs ro,relatime 0 0
After the patch:
# ls /afs/grand.central.org/archive
linuxdev/ mailman/ moin/ mysql/ pipermail/ stage/ twiki/
# ls /afs/kth.se/
admin/ common/ install/ OldFiles/ service/ system/
bakrestores/ home/ misc/ pkg/ src/ wsadmin/
# cat /proc/mounts | grep afs
none /afs afs rw,relatime,dyn,autocell 0 0
#grand.central.org:root.cell /afs/grand.central.org afs ro,relatime 0 0
#grand.central.org:root.archive /afs/grand.central.org/archive afs ro,relatime 0 0
#kth.se:root.cell /afs/kth.se afs ro,relatime 0 0
Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Carsten Jacobi <jacobi@de.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
cc: Todd DeSantis <atd@us.ibm.com>
Fix the lookup method on the dynamic root directory such that creation
calls, such as mkdir, open(O_CREAT), symlink, etc. fail with EOPNOTSUPP
rather than failing with some odd error (such as EEXIST).
lookup() itself tries to create automount directories when it is invoked.
These are cached locally in RAM and not committed to storage.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
Each AFS mountpoint has strings that define the target to be mounted. This
is required to end in a dot that is supposed to be stripped off. The
string can include suffixes of ".readonly" or ".backup" - which are
supposed to come before the terminal dot. To add to the confusion, the "fs
lsmount" afs utility does not show the terminal dot when displaying the
string.
The kernel mount source string parser, however, assumes that the terminal
dot marks the suffix and that the suffix is always "" and is thus ignored.
In most cases, there is no suffix and this is not a problem - but if there
is a suffix, it is lost and this affects the ability to mount the correct
volume.
The command line mount command, on the other hand, is expected not to
include a terminal dot - so the problem doesn't arise there.
Fix this by making sure that the dot exists and then stripping it when
passing the string to the mount configuration.
Fixes: bec5eb6141 ("AFS: Implement an autocell mount capability [ver #2]")
Reported-by: Jonathan Billings <jsbillings@jsbillings.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
After original patch was merged there were additional comments/requests
provided by Rob Herring [1]. Mostly they are related to json-schema usage,
and this patch fixes them. Also SPDX-License-Identifier has been changed to
(GPL-2.0-only OR BSD-2-Clause) as requested.
[1] https://lkml.org/lkml/2019/11/21/875
Fixes: ef63fe72f6 ("dt-bindings: net: ti: add new cpsw switch driver bindings")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
[robh: Remove 2 more maxItems that aren't necessary]
Signed-off-by: Rob Herring <robh@kernel.org>
If the optional wdg interrupt is defined, then this property
may be defined.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Since retirement may be running in a worker on another CPU, it may be
skipped in the local intel_gt_wait_for_idle(). To ensure the state is
consistent for our sanity checks upon load, serialise with the remote
retirer by waiting on the timeline->mutex.
Outside of this use case, e.g. on suspend or module unload, we expect the
slack to be picked up by intel_gt_pm_wait_for_idle() and so prefer to
put the special case serialisation with retirement in its single user,
for now at least.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191121071044.97798-2-chris@chris-wilson.co.uk
(cherry picked from commit 2d0fb25136)
Fixes: 093b922873 ("drm/i915: Split i915_active.mutex into an irq-safe spinlock for the rbtree")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/754
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We managed to get confused about the shift direction at least once.
Let's switch to division/multiplcation instead. Add a number of pages
macro for this purpose. We still keep the order macro around too since
this is what alloc/free pages want.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
free_page_order is a confusing name. It's not a page order
actually, it's the order of the block of memory we are hinting.
Rename to hint_block_order. Also, rename SIZE to BYTES
to make it clear it's the block size in bytes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
As a preparation for an API conversion, factor out something frequently
used in the media subsystem. As an improvement, it bails out on both,
NULL and ERRPTR to handle the old and new API.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
After applying the fixup ALC274_FIXUP_DELL_AIO_LINEOUT_VERB, the
Line-out jack works well. And instead of adding a new set of pin
definition in the pin_fixup_tbl, we put a more generic matching entry
in the fallback_pin_fixup_tbl.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191211051321.5883-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In chasing a performance issue between using IORING_OP_RECVMSG and
IORING_OP_READV on sockets, tracing showed that we always punt the
socket reads to async offload. This is due to io_file_supports_async()
not checking for S_ISSOCK on the inode. Since sockets supports the
O_NONBLOCK (or MSG_DONTWAIT) flag just fine, add sockets to the list
of file types that we can do a non-blocking issue to.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The socket read/write helpers only look at the file O_NONBLOCK. not
the iocb IOCB_NOWAIT flag. This breaks users like preadv2/pwritev2
and io_uring that rely on not having the file itself marked nonblocking,
but rather the iocb itself.
Cc: netdev@vger.kernel.org
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We hash regular files to avoid having multiple threads hammer on the
inode mutex, but it should not be needed on other types of files
(like sockets).
Signed-off-by: Jens Axboe <axboe@kernel.dk>
One major use case of linked commands is the ability to run the next
link inline, if at all possible. This is done correctly for async
offload, but somewhere along the line we lost the ability to do so when
we were able to complete a request without having to punt it. Ensure
that we do so correctly.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This essentially reverts commit e944475e69. For high poll ops
workloads, like TAO, the dynamic allocation of the wait_queue
entry for IORING_OP_POLL_ADD adds considerable extra overhead.
Go back to embedding the wait_queue_entry, but keep the usage of
wait->private for the pointer stashing.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't just assign it from the main call path, that can miss the case
when we're called from issue deferral.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use the mutex to guard against registered file updates, for instance.
Ensure we're safe in accessing that state against concurrent updates.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To avoid going to sleep only to get woken shortly thereafter, spin
briefly for new work upon completion of work.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only have one cases of using the waitqueue to wake the worker, the
rest are using wake_up_process(). Since we can save some cycles not
fiddling with the waitqueue io_wqe_worker(), switch the work activation
to task wakeup and get rid of the now unused wait_queue_head_t in
struct io_worker.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some commands will invariably end in a failure in the sense that the
completion result will be less than zero. One such example is timeouts
that don't have a completion count set, they will always complete with
-ETIME unless cancelled.
For linked commands, we sever links and fail the rest of the chain if
the result is less than zero. Since we have commands where we know that
will happen, add IOSQE_IO_HARDLINK as a stronger link that doesn't sever
regardless of the completion result. Note that the link will still sever
if we fail submitting the parent request, hard links are only resilient
in the presence of completion results for requests that did submit
correctly.
Cc: stable@vger.kernel.org # v5.4
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reported-by: 李通洲 <carter.li@eoitek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It turns out that cpuidle_driver_state_disabled() can be called
before registering the cpufreq driver on some platforms, which
was not expected when it was introduced and which leads to a NULL
pointer dereference when trying to walk the CPUs associated with
the given cpuidle driver.
Fix the problem by making cpuidle_driver_state_disabled() check if
the driver's mask of CPUs associated with it is present and to set
CPUIDLE_FLAG_UNUSABLE for the given idle state in the driver's states
list if that is not the case to cause __cpuidle_register_device() to
set CPUIDLE_STATE_DISABLED_BY_DRIVER for that state for all cpuidle
devices registered by it later.
Fixes: cbda56d5fe ("cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks")
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Calling kzalloc() and related functions requires the
linux/slab.h header to be included:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c: In function 'dcn21_ipp_create':
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c:679:3: error: implicit declaration of function 'kzalloc'; did you mean 'd_alloc'? [-Werror=implicit-function-declaration]
kzalloc(sizeof(struct dcn10_ipp), GFP_KERNEL);
A lot of other headers also miss a direct include in this file,
but this is the only one that causes a problem for now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix kernel-doc warning in <linux/i2c.h>.
../include/linux/i2c.h:337: warning: Function parameter or member 'init_irq' not described in 'i2c_client'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
All in-kernel users have been converted to
{devm_}i2c_new_dummy_device(). Remove the old API.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
An initialization was added for two optional struct members. One of
these is always present in the dcn20_resource file, but the other one
depends on CONFIG_DRM_AMD_DC_DSC_SUPPORT and causes a build failure if
that is missing:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:926:14: error: excess elements in struct initializer [-Werror]
.num_dsc = 5,
Add another #ifdef around the assignment.
Fixes: c3d03c5a19 ("drm/amd/display: Include num_vmid and num_dsc within NV14's resource caps")
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Depending on type of BPF programs served by BPF trampoline it can call original
function. In such case the trampoline will skip one stack frame while
returning. That will confuse function_graph tracer and will cause crashes with
bad RIP. Teach graph tracer to skip functions that have BPF trampoline attached.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
kernel/trace/trace_events_inject.c: In function trace_inject_entry:
kernel/trace/trace_events_inject.c:20:22: warning: variable buffer set but not used [-Wunused-but-set-variable]
It is never used, so remove it.
Link: http://lkml.kernel.org/r/20191207034409.25668-1-yuehaibing@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When pulling in Divya Indi's patch, I made a minor fix to remove unneeded
braces. I commited my fix up via "git commit -a --amend". Unfortunately, I
didn't realize I had some changes I was testing in the module code, and
those changes were applied to Divya's patch as well.
This reverts the accidental updates to the module code.
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Divya Indi <divya.indi@oracle.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Fixes: e585e6469d ("tracing: Verify if trace array exists before destroying it.")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Nicholas Johnson reports a null pointer deref as well as a refcount
underflow upon hot-removal of a Thunderbolt-attached AMD eGPU.
He's bisected the issue down to commit 586bc4aab8 ("ALSA: hda/hdmi -
fix vgaswitcheroo detection for AMD").
The commit iterates over PCI devices using pci_get_class() and
unreferences each device found, even though pci_get_class()
subsequently unreferences the device as well. Fix it.
Fixes: 586bc4aab8 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD")
Link: https://lore.kernel.org/r/PSXP216MB0438BFEAA0617283A834E11580580@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM/
Reported-and-tested-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Alexander Deucher <alexander.deucher@amd.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/r/77aa6c01aefe1ebc4004e87b0bc714f2759f15c4.1575985006.git.lukas@wunner.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ARC4 is no longer considered secure, so it shouldn't be used, even as
just an example.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Guenter Roeck