The IBM virtual ethernet driver's polling function continues
to process frames after rescheduling NAPI, resulting in a warning
if it exhausted its budget. Do not restart polling after calling
napi_reschedule. Instead let frames be processed in the following
instance.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__bpf_redirect() and act_mirred checks this boolean
to determine whether to prefix an ethernet header.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ax88772_bind() should return error code immediately when the PHY
was not reset properly through ax88772a_hw_reset().
Otherwise, The asix_get_phyid() will block when get the PHY
Identifier from the PHYSID1 MII registers through asix_mdio_read()
due to the PHY isn't ready. Furthermore, it will produce a lot of
error message cause system crash.As follows:
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send
software reset: ffffffb9
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
reg index 0x0000: -71
...
Signed-off-by: Zhang Run <zhang.run@zte.com.cn>
Reviewed-by: Yang Wei <yang.wei9@zte.com.cn>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following Marvell's acquisition of Cavium, we need to update all the
Cavium drivers maintainer's entries to point to our new e-mail addresses.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ameen Rahman <Ameen.Rahman@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
and Adrian Vladu's first patch fixing a few spelling mistakes.
-----BEGIN PGP SIGNATURE-----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=GKPZ
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Sasha Levin says:
====================
Hyper-V hv_netvsc commits for 5.0
Three patches from Haiyang Zhang to fix settings hash key using ethtool,
and Adrian Vladu's first patch fixing a few spelling mistakes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEENrCndlB/VnAEWuH5k9IU1zQoZfEFAlxHFuoTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCT0hTXNChl8eRAB/9Sp32xbjIVeyyEro8+vmlJ/HlSNgcC
txqmmh0ce4n1gglV3G5ll8mDYJsk5Qz+ur8wbud7CVxFmpeGqkAA7qoYeD8DawSp
/77dBG8yX/t8vxU5jGK9l5FomVcrqKSVbK20R6u0MLeZhF+VdJCu7cDElgIsKDqX
N76Df/mTnfdhReoM05CXEwzvEN8StHljm+oecyunxfw3XPtqDkO7QHEVYpk2zwVI
4U2aYu9L1gDbj5yGXNu8l/WwEL4ttyC7rqoW9we1hsDVtxRh1/o+Tond6/HPxIcN
voO/fm97ZKxpDL3cE0Jg6Grq9jUek7GT8oRRkAdWO4YaLr3f70kibQ3s
=d+ps
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.0-20190122' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2019-01-22
this is a pull request of 4 patches for net/master.
The first patch by is by Manfred Schlaegl and reverts a patch that caused wrong
warning messages in certain use cases. The next patch is by Oliver Hartkopp for
the bcm that adds sanity checks for the timer value before using it to detect
potential interger overflows. The last two patches are for the flexcan driver,
YueHaibing's patch fixes the the return value in the error path of the
flexcan_setup_stop_mode() function. The second patch is by Uwe Kleine-König and
fixes a NULL pointer deref on older flexcan cores in flexcan_chip_start().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan says:
====================
mlx4_core fixes for 5.0-rc
This patchset includes two fixes for the mlx4_core driver.
First patch by Aya fixes inaccurate parsing of some FW fields, mistakenly
including additional (mostly reserved) bits.
Second patch by Jack fixes a wrong (yet harmless) error handling of
calls to copy_to_user() during the CQs init stage.
Series generated against net commit:
49a57857ae Linux 5.0-rc3
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Procedure mlx4_init_user_cqes() handles returns by copy_to_user
incorrectly. copy_to_user() returns the number of bytes not copied.
Thus, a non-zero return should be treated as a -EFAULT error
(as is done elsewhere in the kernel). However, mlx4_init_user_cqes()
error handling simply returns the number of bytes not copied
(instead of -EFAULT).
Note, though, that this is a harmless bug: procedure mlx4_alloc_cq()
(which is the only caller of mlx4_init_user_cqes()) treats any
non-zero return as an error, but that returned error value is processed
internally, and not passed further up the call stack.
In addition, fixes the following sparse warning:
warning: incorrect type in argument 1 (different address spaces)
expected void [noderef] <asn:1>*to
got void *buf
Fixes: e45678973d ("{net, IB}/mlx4: Initialize CQ buffers in the driver when possible")
Reported by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver reads the query HCA capabilities without the corresponding masks.
Without the correct masks, the base addresses of the queues are
unaligned. In addition some reserved bits were wrongly read. Using the
correct masks, ensures alignment of the base addresses and allows future
firmware versions safe use of the reserved bits.
Fixes: ab9c17a009 ("mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet")
Fixes: 0ff1fb654b ("{NET, IB}/mlx4: Add device managed flow steering firmware API")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now sctp_transport_pmtu() passes transport->saddr into .get_dst() to set
flow sport from 'saddr'. However, transport->saddr is set only when
transport->dst exists in sctp_transport_route().
If sctp_transport_pmtu() is called without transport->saddr set, like
when transport->dst doesn't exists, the flow sport will be set to 0
from transport->saddr, which will cause a wrong route to be got.
Commit 6e91b578bf ("sctp: re-use sctp_transport_pmtu in
sctp_transport_route") made the issue be triggered more easily
since sctp_transport_pmtu() would be called in sctp_transport_route()
after that.
In gerneral, fl4->fl4_sport should always be set to
htons(asoc->base.bind_addr.port), unless transport->asoc doesn't exist
in sctp_v4/6_get_dst(), which is the case:
sctp_ootb_pkt_new() ->
sctp_transport_route()
For that, we can simply handle it by setting flow sport from saddr only
when it's 0 in sctp_v4/6_get_dst().
Fixes: 6e91b578bf ("sctp: re-use sctp_transport_pmtu in sctp_transport_route")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the paths:
sctp_sf_do_unexpected_init() ->
sctp_make_init_ack()
sctp_sf_do_dupcook_a/b()() ->
sctp_sf_do_5_1D_ce()
The new chunk 'retval' transport is set from the incoming chunk 'chunk'
transport. However, 'retval' transport belong to the new asoc, which
is a different one from 'chunk' transport's asoc.
It will cause that the 'retval' chunk gets set with a wrong transport.
Later when sending it and because of Commit b9fd683982 ("sctp: add
sctp_packet_singleton"), sctp_packet_singleton() will set some fields,
like vtag to 'retval' chunk from that wrong transport's asoc.
This patch is to fix it by setting 'retval' transport correctly which
belongs to the right asoc in sctp_make_init_ack() and
sctp_sf_do_5_1D_ce().
Fixes: b9fd683982 ("sctp: add sctp_packet_singleton")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to improve sctp stream adding events in 2 places:
1. In sctp_process_strreset_addstrm_out(), move up SCTP_MAX_STREAM
and in stream allocation failure checks, as the adding has to
succeed after reconf_timer stops for the in stream adding
request retransmission.
3. In sctp_process_strreset_addstrm_in(), no event should be sent,
as no in or out stream is added here.
Fixes: 50a41591f1 ("sctp: implement receiver-side procedures for the Add Outgoing Streams Request Parameter")
Fixes: c5c4ebb3ab ("sctp: implement receiver-side procedures for the Add Incoming Streams Request Parameter")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to improve sctp stream reset events in 4 places:
1. In sctp_process_strreset_outreq(), the flag should always be set with
SCTP_STREAM_RESET_INCOMING_SSN instead of OUTGOING, as receiver's in
stream is reset here.
2. In sctp_process_strreset_outreq(), move up SCTP_STRRESET_ERR_WRONG_SSN
check, as the reset has to succeed after reconf_timer stops for the
in stream reset request retransmission.
3. In sctp_process_strreset_inreq(), no event should be sent, as no in
or out stream is reset here.
4. In sctp_process_strreset_resp(), SCTP_STREAM_RESET_INCOMING_SSN or
OUTGOING event should always be sent for stream reset requests, no
matter it fails or succeeds to process the request.
Fixes: 8105447645 ("sctp: implement receiver-side procedures for the Outgoing SSN Reset Request Parameter")
Fixes: 16e1a91965 ("sctp: implement receiver-side procedures for the Incoming SSN Reset Request Parameter")
Fixes: 11ae76e67a ("sctp: implement receiver-side procedures for the Reconf Response Parameter")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip l add dev tun type gretap key 1000
ip a a dev tun 10.0.0.1/24
Packets with tun-id 1000 can be recived by tun dev. But packet can't
be sent through dev tun for non-tunnel-dst
With this patch: tunnel-dst can be get through lwtunnel like beflow:
ip r a 10.0.0.7 encap ip dst 172.168.0.11 dev tun
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Was helpful in debug for some recent problems.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Otherwise we gradually leak credits leading to potential
hung session.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the server doesn't grant us at least 3 credits during the mount
we won't be able to complete it because query path info operation
requires 3 credits. Use the cached file handle if possible to allow
the mount to succeed.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If we don't receive a response we can't assume that the server
granted one credit. Assume zero credits in such cases.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The current code doesn't do proper accounting for credits
in SMB1 case: it adds one credit per response only if we get
a complete response while it needs to return it unconditionally.
Fix this and also include malformed responses for SMB2+ into
accounting for credits because such responses have Credit
Granted field, thus nothing prevents to get a proper credit
value from them.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We do need to account for credits received in error responses
to read requests on encrypted sessions.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently we mark MID as malformed if we get an error from server
in a read response. This leads to not properly processing credits
in the readv callback. Fix this by marking such a response as
normal received response and process it appropriately.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When executing add_credits() we currently call cifs_reconnect()
if the number of credits is zero and there are no requests in
flight. In this case we may call cifs_reconnect() recursively
twice and cause memory corruption given the following sequence
of functions:
mid1.callback() -> add_credits() -> cifs_reconnect() ->
-> mid2.callback() -> add_credits() -> cifs_reconnect().
Fix this by avoiding to call cifs_reconnect() in add_credits()
and checking for zero credits in the demultiplex thread.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:368:13: error: 'dpu_plane_danger_signal_ctrl' defined but not used [-Werror=unused-function]
Fixes: 7b2e7adea7 ("drm/msm/dpu: Make dpu_plane_danger_signal_ctrl void")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add a few __printf attribute specifiers to routines that
could use them.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The bindings for Qualcomm opp levels changed after being Acked but
before landing. Thus the code in the GPU driver that was relying on
the old bindings is now broken.
Let's change the code to match the new bindings by adjusting the old
string 'qcom,level' to the new string 'opp-level'. See the patch
("dt-bindings: opp: Introduce opp-level bindings").
NOTE: we will do additional cleanup to totally remove the string from
the code and use the new dev_pm_opp_get_level() but we'll do it in a
future patch. This will facilitate getting the important code fix in
sooner without having to deal with cross-maintainer dependencies.
This patch needs to land before the patch ("arm64: dts: sdm845: Add
gpu and gmu device nodes") since if a tree contains the device tree
patch but not this one you'll get a crash at bootup.
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Each GPU core only uses one interrupt so we don't to look up
an interrupt by name and thereby we don't need interrupt-names.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Every GPU core only has one interrupt so there isn't any
value in looking up the interrupt by name. Remove the name (which
is legacy anyway) and use platform_get_irq() instead.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
When debugfs is disabled, but coredump is turned on, the adreno driver fails to build:
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:4: error: 'struct msm_gpu_funcs' has no member named 'show'
.show = adreno_show,
^~~~
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: note: (near initialization for 'funcs.base')
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: error: initialization of 'void (*)(struct msm_gpu *, struct msm_gem_submit *, struct msm_file_private *)' from incompatible pointer type 'void (*)(struct msm_gpu *, struct msm_gpu_state *, struct drm_printer *)' [-Werror=incompatible-pointer-types]
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: note: (near initialization for 'funcs.base.submit')
drivers/gpu/drm/msm/adreno/a4xx_gpu.c:546:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:1460:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a6xx_gpu.c:769:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/msm_gpu.c: In function 'msm_gpu_devcoredump_read':
drivers/gpu/drm/msm/msm_gpu.c:289:12: error: 'const struct msm_gpu_funcs' has no member named 'show'
Adjust the #ifdef to make it build again.
Fixes: c0fec7f562 ("drm/msm/gpu: Capture the GPU state on a GPU hang")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
- Fix DM thinp's discard passdown to properly account for extra
reference that is taken to guard against reallocating a block before a
discard has been issued.
- Fix bio-based DM's redundant IO accounting that was occurring for bios
that must be split due to the nature of the DM target (e.g. dm-stripe,
dm-thinp, etc).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcShLOAAoJEMUj8QotnQNahKwIAKtIHVmexvytppeapY0JkW+r
eAVvfAmy/wnAir1P4jAM5/vIFydwdiOy9XmJxoB5yZHr7iG7Yhf+N58sN0Bk8SIH
whUmt7MI8bMYkXhJNrEhiWbDDnEc55C7xdAqAYGDH7j2lJEkdnR6hdL5fDnMnCyx
AxbQhAIXOWUCaDZKHQ8VQquq0EDg/LElCaGPWMJ71YTjgoNWV4MvQWqLqk/KJEyb
JfYR+5yaAVlqoysIb+gQtn4+UNA5oU8jSYe1rqrdfZ1fYx5ZYhlhp4gHM3+tD4gL
4zEOPD0iP1hrGc+4ZgWmFT2fZVHcUHcUb8+UnkH52t5QFhnghnTQSnRsaWviqAg=
=ew3d
-----END PGP SIGNATURE-----
Merge tag 'for-5.0/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM crypt's parsing of extended IV arguments.
- Fix DM thinp's discard passdown to properly account for extra
reference that is taken to guard against reallocating a block before
a discard has been issued.
- Fix bio-based DM's redundant IO accounting that was occurring for
bios that must be split due to the nature of the DM target (e.g.
dm-stripe, dm-thinp, etc).
* tag 'for-5.0/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: add missing trace_block_split() to __split_and_process_bio()
dm: fix dm_wq_work() to only use __split_and_process_bio() if appropriate
dm: fix redundant IO accounting for bios that need splitting
dm: fix clone_bio() to trigger blk_recount_segments()
dm thin: fix passdown_double_checking_shared_status()
dm crypt: fix parsing of extended IV arguments
The description of the BLKGETNRZONES zoned block device ioctl was not
added as a comment together with this ioctl definition in commit
65e4e3eee8 ("block: Introduce BLKGETNRZONES ioctl"). Add its
description here.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch avoids that sparse reports the following warnings:
CHECK block/blk-wbt.c
block/blk-wbt.c:600:6: warning: symbol 'wbt_issue' was not declared. Should it be static?
block/blk-wbt.c:620:6: warning: symbol 'wbt_requeue' was not declared. Should it be static?
CC block/blk-wbt.o
block/blk-wbt.c:600:6: warning: no previous prototype for wbt_issue [-Wmissing-prototypes]
void wbt_issue(struct rq_qos *rqos, struct request *rq)
^~~~~~~~~
block/blk-wbt.c:620:6: warning: no previous prototype for wbt_requeue [-Wmissing-prototypes]
void wbt_requeue(struct rq_qos *rqos, struct request *rq)
^~~~~~~~~~~
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAlxJ6LUACgkQnJ2qBz9k
QNn75Qf/U60RPju54Kdyepo4iMFoQXS/VJg87bpRetUdN9vKU3CbnyYAx43ftPOk
GH+UU2u+24DX2AWbzy4yx2CJP1YUUF1oa2QkSW2P9WWn1NYU3goWha1Il8bc96Kq
TQU/ypl83RoaFtw4JwpL27ot39UH5WWafYiackqzOYIuAdpgei2aaZFNvVeb9Ije
9udt7ygcTn94DVdYAFI6NeH5KAA+kzpIyWWRCWlmESsNYnCUQntSLm3tQG8sTHZt
sXk2Kp1r7XFl/zkg9iFSOhSIIyVizSC4cHrE0iJ/0kLgoJjfjbOa1jZ5Eeq8yTc3
UsXI5ICNS3RuZWwSWkh759JnhQ1R/A==
=cB63
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull inotify fix from Jan Kara:
"Fix a file refcount leak in an inotify error path"
* tag 'fsnotify_for_v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
inotify: Fix fd refcount leak in inotify_add_watch().
race in the messenger and a licence clarification for quota.c.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlxJ3K8THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi1lOB/0TBU39AKY7ivUXjv18v+0Yrb89lZF0
i5G0ZiyY5Ho2TZlOiPeJ7C7e/WPwJYsnaeQbc9raALFi4Xz4RKpkazUGVbioI0CX
5RS+6dXSf8YfENlxRF5N5UiTUPcs3PZMV82LxRwic4kMsX9TTkNnLQYfPmPDRd7z
yJHVKHsLjnrnoEn+wOIbBd2/ehQ14DLnYpkiYvHhgK06fsCxTPYLUgBuF33nrgT1
Xj8pbRzUrTt4vKQ4oOHcLpByYeQUhxM33KWuovuxT9A1dRWUvSjWpa955m896hWH
+b9jqA+ENHQtDs9v7kbu8oprU3B2mk41gdQhGOVu9N33LHHJk7KVxPX+
=JmE5
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.0-rc4' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A fix for a potential use-after-free, a patch to close a (mostly
benign) race in the messenger and a licence clarification for quota.c"
* tag 'ceph-for-5.0-rc4' of git://github.com/ceph/ceph-client:
ceph: quota: cleanup license mess
libceph: avoid KEEPALIVE_PENDING races in ceph_con_keepalive()
ceph: clear inode pointer when snap realm gets dropped by its inode
A significant amount of fixes at this time, mostly for covering the
recent ASoC issues.
- Fixes for the missing ASoC driver initialization with non-deferred
probes; these triggered other problems in chain, which resulted in
yet more fix commits
- DaVinci runtime PM fix; the diff looks large but it's just a code
shuffling
- Various fixes for ASoC Intel drivers: a regression in HD-A HDMI,
Kconfig dependency, machine driver adjustments, PLL fix.
- Other ASoC driver-specific stuff including the trivial fixes
caught by static analysis
- Usual HD-audio quirks
-----BEGIN PGP SIGNATURE-----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=gEDB
-----END PGP SIGNATURE-----
Merge tag 'sound-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A significant amount of fixes at this time, mostly for covering the
recent ASoC issues.
- Fixes for the missing ASoC driver initialization with non-deferred
probes; these triggered other problems in chain, which resulted in
yet more fix commits
- DaVinci runtime PM fix; the diff looks large but it's just a code
shuffling
- Various fixes for ASoC Intel drivers: a regression in HD-A HDMI,
Kconfig dependency, machine driver adjustments, PLL fix.
- Other ASoC driver-specific stuff including the trivial fixes caught
by static analysis
- Usual HD-audio quirks"
* tag 'sound-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda - Add mute LED support for HP ProBook 470 G5
ASoC: amd: Fix potential NULL pointer dereference
ASoC: imx-audmux: change snprintf to scnprintf for possible overflow
ASoC: rt5514-spi: Fix potential NULL pointer dereference
ASoC: dapm: change snprintf to scnprintf for possible overflow
ASoC: rt5682: Fix PLL source register definitions
ASoC: core: Don't defer probe on optional, NULL components
ASoC: core: Make snd_soc_find_component() more robust
ASoC: soc-core: fix init platform memory handling
ASoC: intel: skl: Fix display power regression
ALSA: hda/realtek - Fix typo for ALC225 model
ASoC: soc-core: Hold client_mutex around soc_init_dai_link()
ASoC: Intel: Boards: move the codec PLL configuration to _init
ASoC: soc-core: defer card probe until all component is added to list
ASoC: atom: fix a missing check of snd_pcm_lib_malloc_pages
ASoC: tlv320aic32x4: Kernel OOPS while entering DAPM standby mode
ASoC: ti: davinci-mcasp: Move context save/restore to runtime_pm callbacks
ASoC: Variable "val" in function rt274_i2c_probe() could be uninitialized
ASoC: rt5682: Fix recording no sound issue
ASoC: Intel: atom: Make PCI dependency explicit
...
Swap REQ_NOWAIT and REQ_NOUNMAP and add REQ_HIPRI.
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Precise and non-ambiguous license information is important. The recently
added aegis header file has a SPDX license identifier, which is nice, but
at the same time it has a contradictionary license boiler plate text.
SPDX-License-Identifier: GPL-2.0
versus
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
Oh well.
Assuming that the SPDX identifier is correct and according to x86/hyper-v
contributions from Microsoft GPL V2 only is the usual license.
Remove the boiler plate as it is wrong and even if correct it is redundant.
Fixes: eccb4422cf ("smb3: Add ftrace tracepoints for improved SMB3 debugging")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steve French <sfrench@samba.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
When doing MTU i/o we need to leave some credits for
possible reopen requests and other operations happening
in parallel. Currently we leave 1 credit which is not
enough even for reopen only: we need at least 2 credits
if durable handle reconnect fails. Also there may be
other operations at the same time including compounding
ones which require 3 credits at a time each. Fix this
by leaving 8 credits which is big enough to cover most
scenarios.
Was able to reproduce this when server was configured
to give out fewer credits than usual.
The proper fix would be to reconnect a file handle first
and then obtain credits for an MTU request but this leads
to bigger code changes and should happen in other patches.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The call to SMB2_queary_acl can allocate memory to pntsd and also
return a failure via a call to SMB2_query_acl (and then query_info).
This occurs when query_info allocates the structure and then in
query_info the call to smb2_validate_and_copy_iov fails. Currently the
failure just returns without kfree'ing pntsd hence causing a memory
leak.
Currently, *data is allocated if it's not already pointing to a buffer,
so it needs to be kfree'd only if was allocated in query_info, so the
fix adds an allocated flag to track this. Also set *dlen to zero on
an error just to be safe since *data is kfree'd.
Also set errno to -ENOMEM if the allocation of *data fails.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Dan Carpener <dan.carpenter@oracle.com>
Arnd Bergmann pointed out that CONFIG_* cannot be used in a uapi header.
Override with an equivalent conditional.
Fixes: 2e746942eb ("Input: input_event - provide override for sparc64")
Fixes: 152194fe9c ("Input: extend usable life of event timestamps to 2106 on 32 bit systems")
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Record the priority boost we giving to the preempted client or else we
may end up in a situation where the priority queue no longer matches the
request priority order and so we can end up in an infinite loop of
preempting the same pair of requests.
Fixes: e9eaf82d97 ("drm/i915: Priority boost for waiting clients")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190123135155.21562-1-chris@chris-wilson.co.uk
(cherry picked from commit 6e062b60b0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Bit 6 in the ANACAP field is used to indicate that the ANA group ID
doesn't change while the namespace is attached to the controller.
There is an optimisation in the code to only allocate space
for the ANA group header, as the namespace list won't change and
hence would not need to be refreshed.
However, this optimisation was never carried over to the actual
workflow, which always assumes that the buffer is large enough
to hold the ANA header _and_ the namespace list.
So drop this optimisation and always allocate enough space.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Thomas Falcon