mirror of https://gitee.com/openkylin/linux.git
120 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Steffen Maier
|
8684d61481 |
scsi: zfcp: silence all W=1 build warnings for existing kdoc
While at it also improve some copy & paste kdoc mistakes. Signed-off-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Steffen Maier
|
df91eefd08 |
scsi: zfcp: the action field of zfcp_erp_action is actually the type
&zfcp_erp_action.action ==> &zfcp_erp_action.type
While at it, make use of the already defined enum for this purpose to get
at least some build checking (even though an enum is type equivalent to an
int in C). v2.6.27 commit
|
|
|
Steffen Maier
|
9704154fa0 |
scsi: zfcp: drop duplicate seq_no from zfcp_fsf_req which is also in QTCB header
There is no point for double bookkeeping especially just for tracing. The
trace can take it from the QTCB which always exists for non-SRB responses
traced with zfcp_dbf_hba_fsf_res().
As a side effect, this removes an alignment hole and reduces the size of
struct zfcp_fsf_req, and thus of each pending request, by 8 bytes.
Before:
$ pahole -C zfcp_fsf_req drivers/s390/scsi/zfcp.ko
...
struct fsf_qtcb * qtcb; /* 144 8 */
u32 seq_no; /* 152 4 */
/* XXX 4 bytes hole, try to pack */
void * data; /* 160 8 */
...
/* size: 296, cachelines: 2, members: 14 */
/* sum members: 288, holes: 2, sum holes: 8 */
/* last cacheline: 40 bytes */
After:
$ pahole -C zfcp_fsf_req drivers/s390/scsi/zfcp.ko
...
struct fsf_qtcb * qtcb; /* 144 8 */
void * data; /* 152 8 */
...
/* size: 288, cachelines: 2, members: 13 */
/* sum members: 284, holes: 1, sum holes: 4 */
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
|
Steffen Maier
|
f9eca02276 |
scsi: zfcp: drop duplicate fsf_command from zfcp_fsf_req which is also in QTCB header
Status read buffers (SRBs, unsolicited notifications) never use a QTCB [zfcp_fsf_req_create()]. zfcp_fsf_req_send() already uses this to distinguish SRBs from other FSF request types. We can re-use this method in zfcp_fsf_req_complete(). Introduce a helper function to make the check for req->qtcb less magic. SRBs always are FSF_QTCB_UNSOLICITED_STATUS, so we can hard-code this for the two trace functions dealing with SRBs. All other FSF request types have a QTCB and we can get the fsf_command from there. zfcp_dbf_hba_fsf_response() and thus zfcp_dbf_hba_fsf_res() are only called for non-SRB requests so it's safe to dereference the QTCB [zfcp_fsf_req_complete() returns early on SRB, else calls zfcp_fsf_protstatus_eval() which calls zfcp_dbf_hba_fsf_response()]. In zfcp_scsi_forget_cmnd() we guard the QTCB dereference with a preceding NULL check and rely on boolean shortcut evaluation. As a side effect, this causes an alignment hole which we can close in a later patch after having cleaned up all fields of struct zfcp_fsf_req. Before: $ pahole -C zfcp_fsf_req drivers/s390/scsi/zfcp.ko ... u32 status; /* 136 4 */ u32 fsf_command; /* 140 4 */ struct fsf_qtcb * qtcb; /* 144 8 */ ... After: $ pahole -C zfcp_fsf_req drivers/s390/scsi/zfcp.ko ... u32 status; /* 136 4 */ /* XXX 4 bytes hole, try to pack */ struct fsf_qtcb * qtcb; /* 144 8 */ ... Signed-off-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Linus Torvalds
|
5f85942c2e |
SCSI misc on 20180610
This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc, xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also taking target updates which are mostly minor except for the tcmu refactor. The only real core change to worry about is the removal of high page bouncing (in sas, storvsc and iscsi). This has been well tested and no problems have shown up so far. Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWx1pbCYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishUucAP42pccS ziKyiOizuxv9fZ4Q+nXd1A9zhI5tqqpkHjcQegEA40qiZSi3EKGKR8W0UpX7Ntmo tqrZJGojx9lnrAM2RbQ= =NMXg -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc, xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also taking target updates which are mostly minor except for the tcmu refactor. The only real core change to worry about is the removal of high page bouncing (in sas, storvsc and iscsi). This has been well tested and no problems have shown up so far" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits) scsi: lpfc: update driver version to 12.0.0.4 scsi: lpfc: Fix port initialization failure. scsi: lpfc: Fix 16gb hbas failing cq create. scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc scsi: lpfc: correct oversubscription of nvme io requests for an adapter scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx) scsi: hisi_sas: Mark PHY as in reset for nexus reset scsi: hisi_sas: Fix return value when get_free_slot() failed scsi: hisi_sas: Terminate STP reject quickly for v2 hw scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot scsi: hisi_sas: Try wait commands before before controller reset scsi: hisi_sas: Init disks after controller reset scsi: hisi_sas: Create a scsi_host_template per HW module scsi: hisi_sas: Reset disks when discovered scsi: hisi_sas: Add LED feature for v3 hw scsi: hisi_sas: Change common allocation mode of device id scsi: hisi_sas: change slot index allocation mode scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate() scsi: hisi_sas: fix a typo in hisi_sas_task_prep() ... |
|
|
Jens Remus
|
9e156c54ac |
scsi: zfcp: assert that the ERP lock is held when tracing a recovery trigger
Otherwise iterating with list_for_each() over the adapter->erp_ready_head and adapter->erp_running_head lists can lead to an infinite loop. See commit "zfcp: fix infinite iteration on erp_ready_head list". The run-time check is only performed for debug kernels which have the kernel lock validator enabled. Following is an example of the warning that is reported, if the ERP lock is not held when calling zfcp_dbf_rec_trig(): WARNING: CPU: 0 PID: 604 at drivers/s390/scsi/zfcp_dbf.c:288 zfcp_dbf_rec_trig+0x172/0x188 Modules linked in: ... CPU: 0 PID: 604 Comm: kworker/u128:3 Not tainted 4.16.0-... #1 Hardware name: IBM 2964 N96 702 (z/VM 6.4.0) Workqueue: zfcp_q_0.0.1906 zfcp_scsi_rport_work Krnl PSW : 00000000330fdbf9 00000000367e9728 (zfcp_dbf_rec_trig+0x172/0x188) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3 Krnl GPRS: 00000000c57a5d99 3288200000000000 0000000000000000 000000006cc82740 00000000009d09d6 0000000000000000 00000000000000ff 0000000000000000 0000000000000000 0000000000e1b5fe 000000006de01d38 0000000076130958 000000006cc82548 000000006de01a98 00000000009d09d6 000000006a6d3c80 Krnl Code: 00000000009d0ad2: eb7ff0b80004 lmg %r7,%r15,184(%r15) 00000000009d0ad8: c0f4000d7dd0 brcl 15,b80678 #00000000009d0ade: a7f40001 brc 15,9d0ae0 >00000000009d0ae2: a7f4ff7d brc 15,9d09dc 00000000009d0ae6: e340f0f00004 lg %r4,240(%r15) 00000000009d0aec: eb7ff0b80004 lmg %r7,%r15,184(%r15) 00000000009d0af2: 07f4 bcr 15,%r4 00000000009d0af4: 0707 bcr 0,%r7 Call Trace: ([<00000000009d09d6>] zfcp_dbf_rec_trig+0x66/0x188) [<00000000009dd740>] zfcp_scsi_rport_work+0x98/0x190 [<0000000000169b34>] process_one_work+0x3d4/0x6f8 [<000000000016a08a>] worker_thread+0x232/0x418 [<000000000017219e>] kthread+0x166/0x178 [<0000000000b815ea>] kernel_thread_starter+0x6/0xc [<0000000000b815e4>] kernel_thread_starter+0x0/0xc 2 locks held by kworker/u128:3/604: #0: ((wq_completion)name){+.+.}, at: [<0000000082af1024>] process_one_work+0x1dc/0x6f8 #1: ((work_completion)(&port->rport_work)){+.+.}, at: [<0000000082af1024>] process_one_work+0x1dc/0x6f8 Last Breaking-Event-Address: [<00000000009d0ade>] zfcp_dbf_rec_trig+0x16e/0x188 ---[ end trace b2f4020572e2c124 ]--- Suggested-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Steffen Maier
|
8221211863 |
scsi: zfcp: decouple SCSI traces for scsi_eh / TMF from scsi_cmnd
The SCSI command pointer passed to scsi_eh callbacks is just one arbitrary
command of potentially many that are in the eh queue to be processed. The
command is only used to indirectly pass the TMF scope in terms of SCSI
ID/target and SCSI LUN for LUN reset.
Hence, zfcp had filled in SCSI trace record fields which do not really
belong to the TMF. This was confusing.
Therefore, refactor the TMF tracing to work without SCSI command. Since the
FCP channel always requires a valid LUN handle, we use SCSI device as common
context for any TMF (even target reset). To make it even clearer, we set
all bits to 1 for the fields, which do not belong to the TMF, to indicate
that these fields are invalid.
The old zfcp_dbf_scsi() became zfcp_dbf_scsi_common() to now handle both
SCSI commands and TMFs. The old argument scsi_cmnd is now optional and can
be NULL with TMFs. The new argument scsi_device is mandatory to carry
context, as well as SCSI ID/target and SCSI LUN in case of TMFs.
New example trace record formatted with zfcpdbf from s390-tools:
Timestamp : ...
Area : SCSI
Subarea : 00
Level : 1
Exception : -
CPU ID : ..
Caller : 0x...
Record ID : 1
Tag : [lt]r_....
Request ID : 0x<reqid> ID of FSF FCP request with TM flag
For cases without FSF request: 0x0 for none (invalid)
SCSI ID : 0x<scsi_id> SCSI ID/target denoting scope
SCSI LUN : 0x<scsi_lun> SCSI LUN denoting scope
SCSI LUN high : 0x<scsi_lun_high> SCSI LUN denoting scope
SCSI result : 0xffffffff none (invalid)
SCSI retries : 0xff none (invalid)
SCSI allowed : 0xff none (invalid)
SCSI scribble : 0xffffffffffffffff none (invalid)
SCSI opcode : ffffffff ffffffff ffffffff ffffffff none (invalid)
FCP rsp inf cod: 0x00 FCP_RSP info code of TMF
FCP rsp IU : 00000000 00000000 00000100 00000000 ext FCP_RSP IU
00000000 00000008 ext FCP_RSP IU
FCP rsp IU len : 32 FCP_RSP IU length
Payload time : ...
FCP rsp IU all : 00000000 00000000 00000100 00000000 full FCP_RSP IU
00000000 00000008 00000000 00000000 full FCP_RSP IU
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
|
Steffen Maier
|
df30781699 |
scsi: zfcp: fix missing SCSI trace for result of eh_host_reset_handler
For problem determination we need to see whether and why we were successful
or not. This allows deduction of scsi_eh escalation.
Example trace record formatted with zfcpdbf from s390-tools:
Timestamp : ...
Area : SCSI
Subarea : 00
Level : 1
Exception : -
CPU ID : ..
Caller : 0x...
Record ID : 1
Tag : schrh_r SCSI host reset handler result
Request ID : 0x0000000000000000 none (invalid)
SCSI ID : 0xffffffff none (invalid)
SCSI LUN : 0xffffffff none (invalid)
SCSI LUN high : 0xffffffff none (invalid)
SCSI result : 0x00002002 field re-used for midlayer value: SUCCESS
or in other cases: 0x2009 == FAST_IO_FAIL
SCSI retries : 0xff none (invalid)
SCSI allowed : 0xff none (invalid)
SCSI scribble : 0xffffffffffffffff none (invalid)
SCSI opcode : ffffffff ffffffff ffffffff ffffffff none (invalid)
FCP rsp inf cod: 0xff none (invalid)
FCP rsp IU : 00000000 00000000 00000000 00000000 none (invalid)
00000000 00000000
v2.6.35 commit
|
|
|
Jens Remus
|
fa89adba19 |
scsi: zfcp: fix infinite iteration on ERP ready list
zfcp_erp_adapter_reopen() schedules blocking of all of the adapter's rports via zfcp_scsi_schedule_rports_block() and enqueues a reopen adapter ERP action via zfcp_erp_action_enqueue(). Both are separately processed asynchronously and concurrently. Blocking of rports is done in a kworker by zfcp_scsi_rport_work(). It calls zfcp_scsi_rport_block(), which then traces a DBF REC "scpdely" via zfcp_dbf_rec_trig(). zfcp_dbf_rec_trig() acquires the DBF REC spin lock and then iterates with list_for_each() over the adapter's ERP ready list without holding the ERP lock. This opens a race window in which the current list entry can be moved to another list, causing list_for_each() to iterate forever on the wrong list, as the erp_ready_head is never encountered as terminal condition. Meanwhile the ERP action can be processed in the ERP thread by zfcp_erp_thread(). It calls zfcp_erp_strategy(), which acquires the ERP lock and then calls zfcp_erp_action_to_running() to move the ERP action from the ready to the running list. zfcp_erp_action_to_running() can move the ERP action using list_move() just during the aforementioned race window. It then traces a REC RUN "erator1" via zfcp_dbf_rec_run(). zfcp_dbf_rec_run() tries to acquire the DBF REC spin lock. If this is held by the infinitely looping kworker, it effectively spins forever. Example Sequence Diagram: Process ERP Thread rport_work ------------------- ------------------- ------------------- zfcp_erp_adapter_reopen() zfcp_erp_adapter_block() zfcp_scsi_schedule_rports_block() lock ERP zfcp_scsi_rport_work() zfcp_erp_action_enqueue(ZFCP_ERP_ACTION_REOPEN_ADAPTER) list_add_tail() on ready !(rport_task==RPORT_ADD) wake_up() ERP thread zfcp_scsi_rport_block() zfcp_dbf_rec_trig() zfcp_erp_strategy() zfcp_dbf_rec_trig() unlock ERP lock DBF REC zfcp_erp_wait() lock ERP | zfcp_erp_action_to_running() | list_for_each() ready | list_move() current entry | ready to running | zfcp_dbf_rec_run() endless loop over running | zfcp_dbf_rec_run_lvl() | lock DBF REC spins forever Any adapter recovery can trigger this, such as setting the device offline or reboot. V4.9 commit |
|
|
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Martin Peschke
|
f32c9e03d4 |
scsi: zfcp: early returns for traces disabled via level
This patch adds early checks to avoid burning CPU cycles on the assembly of trace entries which would be skipped anyway. Introduce a static const variable to keep the trace level to check with debug_level_enabled() in sync with the actual trace emit with debug_event(). In order not to refactor the SAN tracing too much, simply use a define instead. This change is only for the non / semi hot paths, while the actual (I/O) hot path was already improved earlier: zfcp_dbf_scsi() is already guarded by its only caller _zfcp_dbf_scsi() since commit |
|
|
Steffen Maier
|
9d464fc1b1 |
scsi: zfcp: use endianness conversions with common FC(P) struct fields
Just to silence sparse. Since zfcp only exists for s390 and
s390 is big endian, this has been working correctly without conversions
and all the new conversions are NOPs so no performance impact.
Nonetheless, use the conversion on the constant expression where possible.
NB: N_Port-IDs have always been handled with hton24 or ntoh24 conversions
because they also convert to / from character array.
Affected common code structs and .fields are:
HOT I/O PATH:
fcp_cmnd .fc_dl
FCP command: regular SCSI I/O, including DIX case
SEMI-HOT I/O PATH:
fcp_cmnd .fc_dl
recovery FCP command: task management function (LUN / target reset)
fcp_resp_ext
FCP response having FCP_SNS_LEN_VAL with .fr_rsp_len .fr_sns_len
FCP response having FCP_RESID_UNDER with .fr_resid
RECOVERY / DISCOVERY PATHS:
fc_ct_hdr .ct_cmd .ct_mr_size
zfcp auto port scan [GPN_FT] with fc_gpn_ft_resp.fp_wwpn,
recovery for returned port [GID_PN] with fc_ns_gid_pn.fn_wwpn,
get symbolic port name [GSPN],
register symbolic port name [RSPN] (NPIV only).
fc_els_rscn .rscn_plen
incoming ELS (RSCN).
fc_els_flogi .fl_wwpn .fl_wwnn
incoming ELS (PLOGI),
port open response with .fl_csp.sp_bb_data .fl_cssp[0..3].cp_class,
FCP channel physical port,
point-to-point peer (P2P only).
fc_els_logo .fl_n_port_wwn
incoming ELS (LOGO).
fc_els_adisc .adisc_wwnn .adisc_wwpn
path test after RSCN for gone target port.
Since v4.10 commit
|
|
|
Steffen Maier
|
df00d7b8d5 |
scsi: zfcp: use common code fcp_cmnd and fcp_resp with union in fsf_qtcb_bottom_io
This eases crash dump analysis by automatically dissecting these
protocol headers at least somewhat rather than getting a string
interpretation of large unstructured character array buffer fields.
Also, we can get rid of some unnecessary and error-prone type casts.
This change is possible since v2.6.33 commit
|
|
|
Steffen Maier
|
5d4a3d0a2f |
scsi: zfcp: trace high part of "new" 64 bit SCSI LUN
Complements debugging aspects of the otherwise functionally complete v3.17 commit |
|
|
Steffen Maier
|
12c3e5754c |
scsi: zfcp: fix payload with full FCP_RSP IU in SCSI trace records
If the FCP_RSP UI has optional parts (FCP_SNS_INFO or FCP_RSP_INFO) and thus does not fit into the fsp_rsp field built into a SCSI trace record, trace the full FCP_RSP UI with all optional parts as payload record instead of just FCP_SNS_INFO as payload and a 1 byte RSP_INFO_CODE part of FCP_RSP_INFO built into the SCSI record. That way we would also get the full FCP_SNS_INFO in case a target would ever send more than min(SCSI_SENSE_BUFFERSIZE==96, ZFCP_DBF_PAY_MAX_REC==256)==96. The mandatory part of FCP_RSP IU is only 24 bytes. PAYload costs at least one full PAY record of 256 bytes anyway. We cap to the hardware response size which is only FSF_FCP_RSP_SIZE==128. So we can just put the whole FCP_RSP IU with any optional parts into PAYload similarly as we do for SAN PAY since v4.9 commit |
|
|
Steffen Maier
|
975171b446 |
scsi: zfcp: fix capping of unsuccessful GPN_FT SAN response trace records
v4.9 commit |
|
|
Steffen Maier
|
6f2ce1c6af |
scsi: zfcp: fix rport unblock race with LUN recovery
It is unavoidable that zfcp_scsi_queuecommand() has to finish requests
with DID_IMM_RETRY (like fc_remote_port_chkready()) during the time
window when zfcp detected an unavailable rport but
fc_remote_port_delete(), which is asynchronous via
zfcp_scsi_schedule_rport_block(), has not yet blocked the rport.
However, for the case when the rport becomes available again, we should
prevent unblocking the rport too early. In contrast to other FCP LLDDs,
zfcp has to open each LUN with the FCP channel hardware before it can
send I/O to a LUN. So if a port already has LUNs attached and we
unblock the rport just after port recovery, recoveries of LUNs behind
this port can still be pending which in turn force
zfcp_scsi_queuecommand() to unnecessarily finish requests with
DID_IMM_RETRY.
This also opens a time window with unblocked rport (until the followup
LUN reopen recovery has finished). If a scsi_cmnd timeout occurs during
this time window fc_timed_out() cannot work as desired and such command
would indeed time out and trigger scsi_eh. This prevents a clean and
timely path failover. This should not happen if the path issue can be
recovered on FC transport layer such as path issues involving RSCNs.
Fix this by only calling zfcp_scsi_schedule_rport_register(), to
asynchronously trigger fc_remote_port_add(), after all LUN recoveries as
children of the rport have finished and no new recoveries of equal or
higher order were triggered meanwhile. Finished intentionally includes
any recovery result no matter if successful or failed (still unblock
rport so other successful LUNs work). For simplicity, we check after
each finished LUN recovery if there is another LUN recovery pending on
the same port and then do nothing. We handle the special case of a
successful recovery of a port without LUN children the same way without
changing this case's semantics.
For debugging we introduce 2 new trace records written if the rport
unblock attempt was aborted due to still unfinished or freshly triggered
recovery. The records are only written above the default trace level.
Benjamin noticed the important special case of new recovery that can be
triggered between having given up the erp_lock and before calling
zfcp_erp_action_cleanup() within zfcp_erp_strategy(). We must avoid the
following sequence:
ERP thread rport_work other context
------------------------- -------------- --------------------------------
port is unblocked, rport still blocked,
due to pending/running ERP action,
so ((port->status & ...UNBLOCK) != 0)
and (port->rport == NULL)
unlock ERP
zfcp_erp_action_cleanup()
case ZFCP_ERP_ACTION_REOPEN_LUN:
zfcp_erp_try_rport_unblock()
((status & ...UNBLOCK) != 0) [OLD!]
zfcp_erp_port_reopen()
lock ERP
zfcp_erp_port_block()
port->status clear ...UNBLOCK
unlock ERP
zfcp_scsi_schedule_rport_block()
port->rport_task = RPORT_DEL
queue_work(rport_work)
zfcp_scsi_rport_work()
(port->rport_task != RPORT_ADD)
port->rport_task = RPORT_NONE
zfcp_scsi_rport_block()
if (!port->rport) return
zfcp_scsi_schedule_rport_register()
port->rport_task = RPORT_ADD
queue_work(rport_work)
zfcp_scsi_rport_work()
(port->rport_task == RPORT_ADD)
port->rport_task = RPORT_NONE
zfcp_scsi_rport_register()
(port->rport == NULL)
rport = fc_remote_port_add()
port->rport = rport;
Now the rport was erroneously unblocked while the zfcp_port is blocked.
This is another situation we want to avoid due to scsi_eh
potential. This state would at least remain until the new recovery from
the other context finished successfully, or potentially forever if it
failed. In order to close this race, we take the erp_lock inside
zfcp_erp_try_rport_unblock() when checking the status of zfcp_port or
LUN. With that, the possible corresponding rport state sequences would
be: (unblock[ERP thread],block[other context]) if the ERP thread gets
erp_lock first and still sees ((port->status & ...UNBLOCK) != 0),
(block[other context],NOP[ERP thread]) if the ERP thread gets erp_lock
after the other context has already cleard ...UNBLOCK from port->status.
Since checking fields of struct erp_action is unsafe because they could
have been overwritten (re-used for new recovery) meanwhile, we only
check status of zfcp_port and LUN since these are only changed under
erp_lock elsewhere. Regarding the check of the proper status flags (port
or port_forced are similar to the shown adapter recovery):
[zfcp_erp_adapter_shutdown()]
zfcp_erp_adapter_reopen()
zfcp_erp_adapter_block()
* clear UNBLOCK ---------------------------------------+
zfcp_scsi_schedule_rports_block() |
write_lock_irqsave(&adapter->erp_lock, flags);-------+ |
zfcp_erp_action_enqueue() | |
zfcp_erp_setup_act() | |
* set ERP_INUSE -----------------------------------|--|--+
write_unlock_irqrestore(&adapter->erp_lock, flags);--+ | |
.context-switch. | |
zfcp_erp_thread() | |
zfcp_erp_strategy() | |
write_lock_irqsave(&adapter->erp_lock, flags);------+ | |
... | | |
zfcp_erp_strategy_check_target() | | |
zfcp_erp_strategy_check_adapter() | | |
zfcp_erp_adapter_unblock() | | |
* set UNBLOCK -----------------------------------|--+ |
zfcp_erp_action_dequeue() | |
* clear ERP_INUSE ---------------------------------|-----+
... |
write_unlock_irqrestore(&adapter->erp_lock, flags);-+
Hence, we should check for both UNBLOCK and ERP_INUSE because they are
interleaved. Also we need to explicitly check ERP_FAILED for the link
down case which currently does not clear the UNBLOCK flag in
zfcp_fsf_link_down_info_eval().
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes:
|
|
|
Dan Carpenter
|
e7cb08e894 |
scsi: zfcp: spin_lock_irqsave() is not nestable
We accidentally overwrite the original saved value of "flags" so that we
can't re-enable IRQs at the end of the function. Presumably this
function is mostly called with IRQs disabled or it would be obvious in
testing.
Fixes:
|
|
|
Steffen Maier
|
aceeffbb59 |
zfcp: trace full payload of all SAN records (req,resp,iels)
This was lost with commit |
|
|
Steffen Maier
|
94db3725f0 |
zfcp: fix payload trace length for SAN request&response
commit |
|
|
Steffen Maier
|
771bf03537 |
zfcp: fix D_ID field with actual value on tracing SAN responses
With commit |
|
|
Steffen Maier
|
7c964ffe58 |
zfcp: restore tracing of handle for port and LUN with HBA records
This information was lost with commit |
|
|
Steffen Maier
|
d27a7cb919 |
zfcp: trace on request for open and close of WKA port
Since commit |
|
|
Steffen Maier
|
0102a30a6f |
zfcp: restore: Dont use 0 to indicate invalid LUN in rec trace
bring back commit |
|
|
Steffen Maier
|
35f040df97 |
zfcp: retain trace level for SCSI and HBA FSF response records
While retaining the actual filtering according to trace level, the following commits started to write such filtered records with a hardcoded record level of 1 instead of the actual record level: commit |
|
|
Hannes Reinecke
|
9cb78c16f5 |
scsi: use 64-bit LUNs
The SCSI standard defines 64-bit values for LUNs, and large arrays employing large or hierarchical LUN numbers become more and more common. So update the linux SCSI stack to use 64-bit LUN numbers. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
|
|
Maxime Jayat
|
3f79410c7c |
treewide: Fix common typo in "identify"
Correct common misspelling of "identify" as "indentify" throughout the kernel Signed-off-by: Maxime Jayat <maxime@artisandeveloppeur.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz> |
|
|
Steffen Maier
|
bf3ea3aec5 |
[SCSI] zfcp: module parameter dbflevel for early debugging
So far, we could only increase the s390dbf log level after an FCP device has been initially set online for it to create the dbf entries required to adjust the level. Introduce zfcp.dbflevel as counterpart to the already existing zfcp.dbfsize to enable debugging of e.g. setting an FCP device online. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> |
|
|
Steffen Maier
|
cb45214960 |
[SCSI] zfcp: Do not wakeup while suspended
If the mapping of FCP device bus ID and corresponding subchannel is modified while the Linux image is suspended, the resume of FCP devices can fail. During resume, zfcp gets callbacks from cio regarding the modified subchannels but they can be arbitrarily mixed with the restore/resume callback. Since the cio callbacks would trigger adapter recovery, zfcp could wakeup before the resume callback. Therefore, ignore the cio callbacks regarding subchannels while being suspended. We can safely do so, since zfcp does not deal itself with subchannels. For problem determination purposes, we still trace the ignored callback events. The following kernel messages could be seen on resume: kernel: <WWPN>: parent <FCP device bus ID> should not be sleeping As part of adapter reopen recovery, zfcp performs auto port scanning which can erroneously try to register new remote ports with scsi_transport_fc and the device core code complains about the parent (adapter) still sleeping. kernel: zfcp.3dff9c: <FCP device bus ID>:\ Setting up the QDIO connection to the FCP adapter failed <last kernel message repeated 3 more times> kernel: zfcp.574d43: <FCP device bus ID>:\ ERP cannot recover an error on the FCP device In such cases, the adapter gave up recovery and remained blocked along with its child objects: remote ports and LUNs/scsi devices. Even the adapter shutdown as part of giving up recovery failed because the ccw device state remained disconnected. Later, the corresponding remote ports ran into dev_loss_tmo. As a result, the LUNs were erroneously not available again after resume. Even a manually triggered adapter recovery (e.g. sysfs attribute failed, or device offline/online via sysfs) could not recover the adapter due to the remaining disconnected state of the corresponding ccw device. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> #2.6.32+ Signed-off-by: James Bottomley <JBottomley@Parallels.com> |
|
|
Steffen Maier
|
01e60527f0 |
[SCSI] zfcp: Bounds checking for deferred error trace
The pl vector has scount elements, i.e. pl[scount-1] is the last valid
element. For maximum sized requests, payload->counter == scount after
the last loop iteration. Therefore, do bounds checking first (with
boolean shortcut) to not access the invalid element pl[scount].
Do not trust the maximum sbale->scount value from the HBA
but ensure we won't access the pl vector out of our allocated bounds.
While at it, clean up scoping and prevent unnecessary memset.
Minor fix for
|
|
|
Heiko Carstens
|
a53c8fab3f |
s390/comments: unify copyright messages and remove file names
Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> |
|
|
Heiko Carstens
|
3a4c5d5964 |
s390: add missing module.h/export.h includes
Fix several compile errors on s390 caused by splitting module.h. Some include additions [e.g. qdio_setup.c, zfcp_qdio.c] are in anticipation of pending changes queued for s390 that increase the modular use footprint. [PG: added additional obvious changes since Heiko's original patch] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
|
|
Swen Schillig
|
86a9668a8d |
[SCSI] zfcp: support for hardware data router
FICON Express8S supports hardware data router, which requires an adapted qdio request format. This part 2/2 exploits the functionality in zfcp. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> |
|
|
Swen Schillig
|
ea4a3a6ac4 |
[SCSI] zfcp: Redesign of the debug tracing final cleanup.
This patch is the final cleanup of the redesign from the zfcp tracing. Structures and elements which were used by multiple areas of the former debug tracing are now changed to the new scheme. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
|
|
Swen Schillig
|
250a1352b9 |
[SCSI] zfcp: Redesign of the debug tracing for SCSI records.
This patch is the continuation to redesign the zfcp tracing to a more straight-forward and easy to extend scheme. This patch deals with all trace records of the zfcp SCSI area. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
|
|
Swen Schillig
|
a54ca0f62f |
[SCSI] zfcp: Redesign of the debug tracing for HBA records.
This patch is the continuation to redesign the zfcp tracing to a more straight-forward and easy to extend scheme. This patch deals with all trace records of the zfcp HBA area. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
|
|
Swen Schillig
|
2c55b750a8 |
[SCSI] zfcp: Redesign of the debug tracing for SAN records.
This patch is the continuation to redesign the zfcp tracing to a more straight-forward and easy to extend scheme. This patch deals with all trace records of the zfcp SAN area. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
|
|
Swen Schillig
|
ae0904f60f |
[SCSI] zfcp: Redesign of the debug tracing for recovery actions.
The tracing environment of the zfcp LLD has become very bulky and hard to maintain. Small changes involve a large modification process which is error-prone and not effective. This patch is the first of a set to redesign the zfcp tracing to a more straight-forward and easy to extend scheme. It removes all interpretation and visualization parts and focuses on bare logging of the information. This patch deals with all trace records of the zfcp error recovery. Signed-off-by: Swen schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
|
|
Christof Schmitt
|
bf5eefb007 |
[SCSI] zfcp: Remove scsi_cmnd->serial_number from debug traces
With the change that drivers have to explicitly request the serial number for SCSI commands, this field should not be part of the zfcp traces. It is not worth the effort to request the serial number only for tracing purposes, so simply remove this field from the debug traces. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
|
|
Christof Schmitt
|
b62a8d9b45 |
[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit
This is the large change to switch from using the data in zfcp_unit to zfcp_scsi_dev. Keeping everything working requires doing the switch in one piece. To ensure that no code keeps using the data in zfcp_unit, this patch also removes the data from zfcp_unit that is now being replaced with zfcp_scsi_dev. For zfcp, the scsi_device together with zfcp_scsi_dev exist from the call of slave_alloc to the call of slave_destroy. The data in zfcp_scsi_dev is initialized in zfcp_scsi_slave_alloc and the LUN is opened; the final shutdown for the LUN is run from slave_destroy. Where the scsi_device or zfcp_scsi_dev is needed, the pointer to the scsi_device is passed as function argument and inside the function converted to the pointer to zfcp_scsi_dev; this avoids back and forth conversion betweeen scsi_device and zfcp_scsi_dev. While changing the function arguments from zfcp_unit to scsi_device, the functions names are renamed form "unit" to "lun". This is to have a seperation between zfcp_scsi_dev/LUN and the zfcp_unit; only code referring to the remaining configuration information in zfcp_unit struct uses "unit". Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
|
|
Felix Beck
|
ef3eb71d8b |
[SCSI] zfcp: Introduce experimental support for DIF/DIX
Introduce support for DIF/DIX in zfcp: Report the capabilities for the Scsi_host, map the protection data when issuing I/O requests and handle the new error codes. Also add the fsf data_direction field to the hba trace, it is useful information for debugging in that area. This is an EXPERIMENTAL feature for now. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
|
|
Swen Schillig
|
d23948ea38 |
[SCSI] zfcp: Prevent access on uninitialized memory.
Initialize allocated memory to zero to prevent access on error. This prevents a possible error in the error handling path. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
|
|
Tejun Heo
|
5a0e3ad6af |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> |
|
|
Christof Schmitt
|
34c2b71299 |
[SCSI] zfcp: Introduce header file for qdio structs and inline functions
Move the qdio related structs and some helper functions to a new zfcp_qdio.h header file. While doing this, rename the struct zfcp_queue_req to zfcp_qdio_req to adhere to the naming scheme used in zfcp. This allows a better seperation of the qdio code and inlining the helper functions will save some function calls. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
|
|
Christof Schmitt
|
d21e9daa63 |
[SCSI] zfcp: Dont use 0 to indicate invalid LUN in rec trace
0 is a valid value for a LUN. It is slightly confusing to also see 0 in the trace entries relating to adapter and port. Change this to use 0xFFFFFFFFFFFFFFFF in the LUN field when the trace entry does not relate to a LUN or unit. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
|
|
Christof Schmitt
|
e60a6d69f1 |
[SCSI] zfcp: Remove function zfcp_reqlist_find_safe
Always use the FSF request id as a reference to the FSF request. With this change the function zfcp_reqlist_find_safe is no longer needed and can be removed. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
|
|
Christof Schmitt
|
5a3fb3081a |
[SCSI] zfcp: Fix linebreak in hba trace
Advance the correct pointer when inserting the linebreak for the HBA trace. It was missing in the output since the pointer to the output buffer was never advanced, and the linebreak character was overwritten later. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
|
|
Christof Schmitt
|
7c7dc19681 |
[SCSI] zfcp: Simplify handling of ct and els requests
Remove some redundancies in FC related code and trace: - drop redundant data from SAN trace (local s_id that only changes during link down, ls_code that is already part of payload, d_id in ct response trace that is always the same as in ct request trace) - use one common fsf struct to hold zfcp data for ct and els requests - leverage common fsf struct for FC passthrough job data, allocate it with dd_bsg_data for passthrough requests and unify common code for ct and els passthrough request - simplify callback handling in zfcp_fc Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
|
|
Christof Schmitt
|
800c0cad96 |
[SCSI] zfcp: Remove ZFCP_DID_MASK
Instead of assigning 4 bytes with the highest byte masked out, use a 3 byte array with the ntoh24 and h24ton helper functions, thus eliminating the need for the ZFCP_DID_MASK. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |
|
|
Christof Schmitt
|
bd0072ecc4 |
[SCSI] zfcp: Move WKA port to zfcp FC code
The well-known-address (WKA) port handling code is part of the FC code in zfcp. Move everything WKA related to the zfcp_fc files and use the common zfcp_fc prefix for structs and functions. Drop the unused key management service while renaming the struct, no request could ever reach this service in zfcp and it is obsolete anyway. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> |