This reverts commit 3e5bc68fa5 as it
causes build errors in linux-next.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
when CRYPTO is m and KS7010 is y, building fails:
drivers/staging/ks7010/ks_hostif.o: In function `michael_mic.constprop.13':
ks_hostif.c:(.text+0x560): undefined reference to `crypto_alloc_shash'
ks_hostif.c:(.text+0x580): undefined reference to `crypto_shash_setkey'
ks_hostif.c:(.text+0x5e0): undefined reference to `crypto_destroy_tfm'
ks_hostif.c:(.text+0x614): undefined reference to `crypto_shash_update'
ks_hostif.c:(.text+0x62c): undefined reference to `crypto_shash_update'
ks_hostif.c:(.text+0x648): undefined reference to `crypto_shash_finup'
Add CRYPTO and CRYPTO_HASH dependencies to fix this.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 8b523f2041 ("staging: ks7010: removed custom Michael MIC implementation.")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the initial value of the return variable result is never used, it can
be removed.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function hostif_data_request had two return variables, ret and
result. When ret is assigned a value, in all cases (except one) this
assignment is followed immediately by a goto to the end of the
function. In the last case, the goto takes effect only if ret < 0;
however, if ret >= 0 then this value of ret is not needed in the
remainder of that branch. On the other hand result is used (assigned a
value and returned) only in those branches where ret >= 0 or ret has
not been used at all.
As the values of ret and result are not both required at the same point
in any branch, result can be removed and its occurrences replaced with
ret.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initial value of return variable result is never used, so it can be
removed.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big staging and iio driver update for 5.2-rc1.
Lots of tiny fixes all over the staging and IIO driver trees here, along
with some new IIO drivers.
Also we ended up deleting two drivers, making this pull request remove a
few hundred thousand lines of code, always a nice thing to see. Both of
the drivers removed have been replaced with "real" drivers in their
various subsystem directories, and they will be coming to you from those
locations during this merge window.
There are some core vt/selection changes in here, that was due to some
cleanups needed for the speakup fixes. Those have all been acked by the
various subsystem maintainers (i.e. me), so those are ok.
We also added a few new drivers, for some odd hardware, giving new
developers plenty to work on with basic coding style cleanups to come in
the near future.
Other than that, nothing unusual here.
All of these have been in linux-next for a while with no reported
issues, other than an odd gcc warning for one of the new drivers that
should be fixed up soon.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHGMQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynQRACgwtlC6DFsEFwCplYxQXP5uzuIVTMAoJ61xzC0
Qim7K31f5ulaa3GJuhzo
=zEY5
-----END PGP SIGNATURE-----
Merge tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver updates from Greg KH:
"Here is the big staging and iio driver update for 5.2-rc1.
Lots of tiny fixes all over the staging and IIO driver trees here,
along with some new IIO drivers.
The "counter" subsystem was added in here as well, as it is needed by
the IIO drivers and subsystem.
Also we ended up deleting two drivers, making this pull request remove
a few hundred thousand lines of code, always a nice thing to see. Both
of the drivers removed have been replaced with "real" drivers in their
various subsystem directories, and they will be coming to you from
those locations during this merge window.
There are some core vt/selection changes in here, that was due to some
cleanups needed for the speakup fixes. Those have all been acked by
the various subsystem maintainers (i.e. me), so those are ok.
We also added a few new drivers, for some odd hardware, giving new
developers plenty to work on with basic coding style cleanups to come
in the near future.
Other than that, nothing unusual here.
All of these have been in linux-next for a while with no reported
issues, other than an odd gcc warning for one of the new drivers that
should be fixed up soon"
[ I fixed up the warning myself - Linus ]
* tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (663 commits)
staging: kpc2000: kpc_spi: Fix build error for {read,write}q
Staging: rtl8192e: Remove extra space before break statement
Staging: rtl8192u: ieee80211: Fix if-else indentation warning
Staging: rtl8192u: ieee80211: Fix indentation errors by removing extra spaces
staging: most: cdev: fix chrdev_region leak in mod_exit
staging: wlan-ng: Fix improper SPDX comment style
staging: rtl8192u: ieee80211: Resolve ERROR reported by checkpatch
staging: vc04_services: bcm2835-camera: Compress two lines into one line
staging: rtl8723bs: core: Use !x in place of NULL comparison.
staging: rtl8723bs: core: Prefer using the BIT Macro.
staging: fieldbus: anybus-s: fix wait_for_completion_timeout return handling
staging: kpc2000: fix up build problems with readq()
staging: rtlwifi: move remaining phydm .h files
staging: rtlwifi: strip down phydm .h files
staging: rtlwifi: delete the staging driver
staging: fieldbus: anybus-s: rename bus id field to avoid confusion
staging: fieldbus: anybus-s: keep device bus id in bus endianness
Staging: sm750fb: Change *array into *const array
staging: rtl8192u: ieee80211: Fix spelling mistake
staging: rtl8192u: ieee80211: Replace bit shifting with BIT macro
...
The flags field in 'struct shash_desc' never actually does anything.
The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP.
However, no shash algorithm ever sleeps, making this flag a no-op.
With this being the case, inevitably some users who can't sleep wrongly
pass MAY_SLEEP. These would all need to be fixed if any shash algorithm
actually started sleeping. For example, the shash_ahash_*() functions,
which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP
from the ahash API to the shash API. However, the shash functions are
called under kmap_atomic(), so actually they're assumed to never sleep.
Even if it turns out that some users do need preemption points while
hashing large buffers, we could easily provide a helper function
crypto_shash_update_large() which divides the data into smaller chunks
and calls crypto_shash_update() and cond_resched() for each chunk. It's
not necessary to have a flag in 'struct shash_desc', nor is it necessary
to make individual shash algorithms aware of this at all.
Therefore, remove shash_desc::flags, and document that the
crypto_shash_*() functions can be called from any context.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are a few remaining drivers/staging/*/Makefile files that do not
have SPDX identifiers in them. Add the correct GPL-2.0 identifier to
them to make scanning tools happy.
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few remaining drivers/staging/*/Kconfig files that do not
have SPDX identifiers in them. Add the correct GPL-2.0 identifier to
them to make scanning tools happy.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The range check on auth_type is redundant as there is a prior
check on the auth_type values and the only way the block is entered
is if auth_type is one of TYPE_PMK1, TYPE_GMK1 and TYPE_GMK2. Hence
the auth_type check can be removed.
Detected by static analysis with cppcheck.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl warning:
WARNING: Unnecessary typecast of c90 int constant
Signed-off-by: Wentao Cai <etsai042@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changed the driver to use the kernel's own implementation.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adjust parameters of "netdev_dbg" to match alignment with
open parenthesis.
Issue found using checkpatch.pl
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup extra line found by checkpatch.pl
Signed-off-by: Jeeeun Evans <jeeeunevans@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unnecessary socket buffer null check in hostif_data_request.
There is already an appropriate null check in the calling function:
(ks_wlan_net.c) ks_wlan_start_xmit
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'hostif_mib_set_request_bool' function receives a bool as value and
send the received value with MIB_VALUE_TYPE_BOOL type. There is
one case where the value passed is not a boolean one but
'MCAST_FILTER_PROMISC' which is '2'. Call hostif_mib_set_request_int
instead for related multicast enumeration. This changes original
code behaviour but seems to be the right way to do this.
Fixes: 8ce76bff0e ("staging: ks7010: add new helpers to achieve mib set request and simplify code")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable eth_proto is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'eth_proto' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cpu_to_*() functions already have a cast to u* built in,
so the cast is never required. Review and remove all of
them along the code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 6d6612deaf ("staging: ks7010: Remove unnecessary limit
checks"), this define is not used anywhere. Remove it as well.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an assignment inside hostif_sme_set_pmksa function
which is being used together with cpu_to_le16 using uint16_t as cast
type. Replace it to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some assignments inside hostif_sme_set_rsn function
which are being used together with cpu_to_le16 using uint16_t
as cast type. Replace all of them to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parameters 'failure_count' and 'timer' was declared as unsigned
short and then there was being casted to u16 inside cpu_to_le16
to make the assignation. Just declare them as 'u16' and avoid
casting at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function hostif_bss_scan_request parameters 'scan_ssid' and
'scan_ssid_len' are declared as uint8_t. Change them to be 'u8'
instead which is preferred. Also update two casts inside the same
function to use 'u32' instead of 'uint32_t'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some assignments inside hostif_phy_information_request
function which are being used together with cpu_to_le16 using
uint16_t as cast type. Replace all of them to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an assignment inside hostif_adhoc_set_request function
which is being used together with cpu_to_le16 using uint16_t as cast
type. Replace it to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some assignments inside hostif_infrastructure_set_request
function which are being used together with cpu_to_le16 using
uint16_t as cast type. Replace all of them to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an assignment inside hostif_ps_adhoc_set_request function
which is being used together with cpu_to_le16 using uint16_t as cast
type. Replace it to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are soem assignments inside init_request function which
are being used together with cpu_to_le16 using uint16_t as cast
type. Replace all of them to use 'u16' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use u16 as cast type in hostif_start_request function replacing
uint16_t which was being used.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ks_wlan_cap there is a cast to uint16_t to use cpu_to_le16
with variable 'capability' which is already defined as u16.
Avoid this cast to clean code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Second parameter 'mib_attribute' in function hostif_mib_get_request
is declared as unsigned long and inside the function a cast to uint32_t
is being used. Just pass a u32 instead and avoid the casting.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some castings inside the function hostif_data_request
which are being using with uint16_t type. Fields which have being
assigned are declared as u16. So update casts types to u16 in all
of them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Field 'counter' in mic_failure struct is being assigned casting
value using uint16_t. Replace with u16 which is the correct type
of the field and the preferred one.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field 'wakeup_count' in 'ks_wlan_private' struct is declared
as 'uint' which is not a standard type. Replace in favour of
'unsigned int' which it is.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function ks_wlan_set_rx_gain a cast to uint8_t is being used
to assign reception gain. 'rx_gain' field is defined as u8 so
replace the cast to the correct type
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function ks_wlan_set_tx_gain a cast to uint8_t is being used
to assign transmission gain. 'tx_gain' field is defined as u8 so
replace the cast to the correct type.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some casts to uint8_t in ks_wlan_set_rate function to
assign values of the bitrate. Just change it to u8 which is the one
defined for the field 'body' of the struct which is in use.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The parameter 'size' in function ks_wlan_hw_rx is declared as
uint16_t and can be declared as size_t which makes more sense.
It is being passed to hif_align_size function which also expects
a size_t as parameter so just change its type. Also update two
casts in calls to this function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Header size and event fields of header are declared
as __le16 and being casted using uint16_t in cpu_to_le16.
Change cast to use preferred u16.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable 'byte' in ks7010_upload_firmware function is declared
as unsigned char and is only being used to read hardware
registers which are expected in sdio_read_byteb function as u8.
Change 'byte' variable type to u8 which is preferred.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was two blank lines between definitions and statements
in ks7010_upload_firmware function. Remove one of them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The WPA_CAPABILITY_PREAUTH definition is not being used at all so
just remove it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uwrq is an unsigned 32-bit integer, it cannot be less than zero.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit changes types for local variables declared in
hostif_phy_information_confirm function to use the preferred
one 'u8' and 'u32'. Its values are get using get_byte and get_dword
functions which returns 'u8' and 'u32' so it makes sense.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local variable 'result_code' is declared as unsigned int in
hostif_bss_scan_confirm function. Its value is got calling
get_dword which returns an 'u32' so change its type to u32
which is preferred
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local variable 'connect_code' is declared as unsigned short in
hostif_connect_indication function. Its value is got calling
get_word which returns an 'u16' so change its type to u16
which is preferred.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael S. Tsirkin