mirror of https://gitee.com/openkylin/linux.git
1325 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
291abfea47 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris.
2) Fix thermal zone registration in iwlwifi, from Andrei
Otcheretianski.
3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer.
4) Use after free in mptcp, from Florian Westphal.
5) Use after free in wireguard's root_remove_peer_lists, from Eric
Dumazet.
6) Properly access packets heads in bonding alb code, from Eric
Dumazet.
7) Fix data race in skb_queue_len(), from Qian Cai.
8) Fix regression in r8169 on some chips, from Heiner Kallweit.
9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang.
10) Certain kinds of set link netlink operations can cause a NULL deref
in the ipv6 addrconf code. Fix from Eric Dumazet.
11) Don't cancel uninitialized work queue in drop monitor, from Ido
Schimmel.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: thunderx: use proper interface type for RGMII
mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap
bpf: Improve bucket_log calculation logic
selftests/bpf: Test freeing sockmap/sockhash with a socket in it
bpf, sockhash: Synchronize_rcu before free'ing map
bpf, sockmap: Don't sleep while holding RCU lock on tear-down
bpftool: Don't crash on missing xlated program instructions
bpf, sockmap: Check update requirements after locking
drop_monitor: Do not cancel uninitialized work item
mlxsw: spectrum_dpipe: Add missing error path
mlxsw: core: Add validation of hardware device types for MGPIR register
mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort
selftests: mlxsw: Add test cases for local table route replacement
mlxsw: spectrum_router: Prevent incorrect replacement of local table routes
net: dsa: microchip: enable module autoprobe
ipv6/addrconf: fix potential NULL deref in inet6_set_link_af()
dpaa_eth: support all modes with rate adapting PHYs
net: stmmac: update pci platform data to use phy_interface
net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter
net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter
...
|
|
|
Linus Torvalds
|
c9d35ee049 |
Merge branch 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs file system parameter updates from Al Viro: "Saner fs_parser.c guts and data structures. The system-wide registry of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is the horror switch() in fs_parse() that would have to grow another case every time something got added to that system-wide registry. New syntax types can be added by filesystems easily now, and their namespace is that of functions - not of system-wide enum members. IOW, they can be shared or kept private and if some turn out to be widely useful, we can make them common library helpers, etc., without having to do anything whatsoever to fs_parse() itself. And we already get that kind of requests - the thing that finally pushed me into doing that was "oh, and let's add one for timeouts - things like 15s or 2h". If some filesystem really wants that, let them do it. Without somebody having to play gatekeeper for the variants blessed by direct support in fs_parse(), TYVM. Quite a bit of boilerplate is gone. And IMO the data structures make a lot more sense now. -200LoC, while we are at it" * 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits) tmpfs: switch to use of invalfc() cgroup1: switch to use of errorfc() et.al. procfs: switch to use of invalfc() hugetlbfs: switch to use of invalfc() cramfs: switch to use of errofc() et.al. gfs2: switch to use of errorfc() et.al. fuse: switch to use errorfc() et.al. ceph: use errorfc() and friends instead of spelling the prefix out prefix-handling analogues of errorf() and friends turn fs_param_is_... into functions fs_parse: handle optional arguments sanely fs_parse: fold fs_parameter_desc/fs_parameter_spec fs_parser: remove fs_parameter_description name field add prefix to fs_context->log ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log new primitive: __fs_parse() switch rbd and libceph to p_log-based primitives struct p_log, variants of warnf() et.al. taking that one instead teach logfc() to handle prefices, give it saner calling conventions get rid of cg_invalf() ... |
|
|
David S. Miller
|
2696e1146d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says: ==================== pull-request: bpf 2020-02-07 The following pull-request contains BPF updates for your *net* tree. We've added 15 non-merge commits during the last 10 day(s) which contain a total of 12 files changed, 114 insertions(+), 31 deletions(-). The main changes are: 1) Various BPF sockmap fixes related to RCU handling in the map's tear- down code, from Jakub Sitnicki. 2) Fix macro state explosion in BPF sk_storage map when calculating its bucket_log on allocation, from Martin KaFai Lau. 3) Fix potential BPF sockmap update race by rechecking socket's established state under lock, from Lorenz Bauer. 4) Fix crash in bpftool on missing xlated instructions when kptr_restrict sysctl is set, from Toke Høiland-Jørgensen. 5) Fix i40e's XSK wakeup code to return proper error in busy state and various misc fixes in xdpsock BPF sample code, from Maciej Fijalkowski. 6) Fix the way modifiers are skipped in BTF in the verifier while walking pointers to avoid program rejection, from Alexei Starovoitov. 7) Fix Makefile for runqslower BPF tool to i) rebuild on libbpf changes and ii) to fix undefined reference linker errors for older gcc version due to order of passed gcc parameters, from Yulia Kartseva and Song Liu. 8) Fix a trampoline_count BPF kselftest warning about missing braces around initializer, from Andrii Nakryiko. 9) Fix up redundant "HAVE" prefix from large INSN limit kernel probe in bpftool, from Michal Rostecki. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Al Viro
|
d7167b1499 |
fs_parse: fold fs_parameter_desc/fs_parameter_spec
The former contains nothing but a pointer to an array of the latter... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
|
|
Eric Sandeen
|
96cafb9ccb |
fs_parser: remove fs_parameter_description name field
Unused now. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
|
|
Alexei Starovoitov
|
257af63d7f |
bpf: Fix modifier skipping logic
Fix the way modifiers are skipped while walking pointers. Otherwise second
level dereferences of 'const struct foo *' will be rejected by the verifier.
Fixes:
|
|
|
Linus Torvalds
|
6aee4badd8 |
Merge branch 'work.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull openat2 support from Al Viro:
"This is the openat2() series from Aleksa Sarai.
I'm afraid that the rest of namei stuff will have to wait - it got
zero review the last time I'd posted #work.namei, and there had been a
leak in the posted series I'd caught only last weekend. I was going to
repost it on Monday, but the window opened and the odds of getting any
review during that... Oh, well.
Anyway, openat2 part should be ready; that _did_ get sane amount of
review and public testing, so here it comes"
From Aleksa's description of the series:
"For a very long time, extending openat(2) with new features has been
incredibly frustrating. This stems from the fact that openat(2) is
possibly the most famous counter-example to the mantra "don't silently
accept garbage from userspace" -- it doesn't check whether unknown
flags are present[1].
This means that (generally) the addition of new flags to openat(2) has
been fraught with backwards-compatibility issues (O_TMPFILE has to be
defined as __O_TMPFILE|O_DIRECTORY|[O_RDWR or O_WRONLY] to ensure old
kernels gave errors, since it's insecure to silently ignore the
flag[2]). All new security-related flags therefore have a tough road
to being added to openat(2).
Furthermore, the need for some sort of control over VFS's path
resolution (to avoid malicious paths resulting in inadvertent
breakouts) has been a very long-standing desire of many userspace
applications.
This patchset is a revival of Al Viro's old AT_NO_JUMPS[3] patchset
(which was a variant of David Drysdale's O_BENEATH patchset[4] which
was a spin-off of the Capsicum project[5]) with a few additions and
changes made based on the previous discussion within [6] as well as
others I felt were useful.
In line with the conclusions of the original discussion of
AT_NO_JUMPS, the flag has been split up into separate flags. However,
instead of being an openat(2) flag it is provided through a new
syscall openat2(2) which provides several other improvements to the
openat(2) interface (see the patch description for more details). The
following new LOOKUP_* flags are added:
LOOKUP_NO_XDEV:
Blocks all mountpoint crossings (upwards, downwards, or through
absolute links). Absolute pathnames alone in openat(2) do not
trigger this. Magic-link traversal which implies a vfsmount jump is
also blocked (though magic-link jumps on the same vfsmount are
permitted).
LOOKUP_NO_MAGICLINKS:
Blocks resolution through /proc/$pid/fd-style links. This is done
by blocking the usage of nd_jump_link() during resolution in a
filesystem. The term "magic-links" is used to match with the only
reference to these links in Documentation/, but I'm happy to change
the name.
It should be noted that this is different to the scope of
~LOOKUP_FOLLOW in that it applies to all path components. However,
you can do openat2(NO_FOLLOW|NO_MAGICLINKS) on a magic-link and it
will *not* fail (assuming that no parent component was a
magic-link), and you will have an fd for the magic-link.
In order to correctly detect magic-links, the introduction of a new
LOOKUP_MAGICLINK_JUMPED state flag was required.
LOOKUP_BENEATH:
Disallows escapes to outside the starting dirfd's
tree, using techniques such as ".." or absolute links. Absolute
paths in openat(2) are also disallowed.
Conceptually this flag is to ensure you "stay below" a certain
point in the filesystem tree -- but this requires some additional
to protect against various races that would allow escape using
"..".
Currently LOOKUP_BENEATH implies LOOKUP_NO_MAGICLINKS, because it
can trivially beam you around the filesystem (breaking the
protection). In future, there might be similar safety checks done
as in LOOKUP_IN_ROOT, but that requires more discussion.
In addition, two new flags are added that expand on the above ideas:
LOOKUP_NO_SYMLINKS:
Does what it says on the tin. No symlink resolution is allowed at
all, including magic-links. Just as with LOOKUP_NO_MAGICLINKS this
can still be used with NOFOLLOW to open an fd for the symlink as
long as no parent path had a symlink component.
LOOKUP_IN_ROOT:
This is an extension of LOOKUP_BENEATH that, rather than blocking
attempts to move past the root, forces all such movements to be
scoped to the starting point. This provides chroot(2)-like
protection but without the cost of a chroot(2) for each filesystem
operation, as well as being safe against race attacks that
chroot(2) is not.
If a race is detected (as with LOOKUP_BENEATH) then an error is
generated, and similar to LOOKUP_BENEATH it is not permitted to
cross magic-links with LOOKUP_IN_ROOT.
The primary need for this is from container runtimes, which
currently need to do symlink scoping in userspace[7] when opening
paths in a potentially malicious container.
There is a long list of CVEs that could have bene mitigated by
having RESOLVE_THIS_ROOT (such as CVE-2017-1002101,
CVE-2017-1002102, CVE-2018-15664, and CVE-2019-5736, just to name a
few).
In order to make all of the above more usable, I'm working on
libpathrs[8] which is a C-friendly library for safe path resolution.
It features a userspace-emulated backend if the kernel doesn't support
openat2(2). Hopefully we can get userspace to switch to using it, and
thus get openat2(2) support for free once it's ready.
Future work would include implementing things like
RESOLVE_NO_AUTOMOUNT and possibly a RESOLVE_NO_REMOTE (to allow
programs to be sure they don't hit DoSes though stale NFS handles)"
* 'work.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Documentation: path-lookup: include new LOOKUP flags
selftests: add openat2(2) selftests
open: introduce openat2(2) syscall
namei: LOOKUP_{IN_ROOT,BENEATH}: permit limited ".." resolution
namei: LOOKUP_IN_ROOT: chroot-like scoped resolution
namei: LOOKUP_BENEATH: O_BENEATH-like scoped resolution
namei: LOOKUP_NO_XDEV: block mountpoint crossing
namei: LOOKUP_NO_MAGICLINKS: block magic-link resolution
namei: LOOKUP_NO_SYMLINKS: block symlink resolution
namei: allow set_root() to produce errors
namei: allow nd_jump_link() to produce errors
nsfs: clean-up ns_get_path() signature to return int
namei: only return -ECHILD from follow_dotdot_rcu()
|
|
|
Martin KaFai Lau
|
d3e42bb0a3 |
bpf: Reuse log from btf_prase_vmlinux() in btf_struct_ops_init()
Instead of using a locally defined "struct bpf_verifier_log log = {}",
btf_struct_ops_init() should reuse the "log" from its calling
function "btf_parse_vmlinux()". It should also resolve the
frame-size too large compiler warning in some ARCH.
Fixes:
|
|
|
John Fastabend
|
b23bfa5633 |
bpf, xdp: Remove no longer required rcu_read_{un}lock()
Now that we depend on rcu_call() and synchronize_rcu() to also wait for preempt_disabled region to complete the rcu read critical section in __dev_map_flush() is no longer required. Except in a few special cases in drivers that need it for other reasons. These originally ensured the map reference was safe while a map was also being free'd. And additionally that bpf program updates via ndo_bpf did not happen while flush updates were in flight. But flush by new rules can only be called from preempt-disabled NAPI context. The synchronize_rcu from the map free path and the rcu_call from the delete path will ensure the reference there is safe. So lets remove the rcu_read_lock and rcu_read_unlock pair to avoid any confusion around how this is being protected. If the rcu_read_lock was required it would mean errors in the above logic and the original patch would also be wrong. Now that we have done above we put the rcu_read_lock in the driver code where it is needed in a driver dependent way. I think this helps readability of the code so we know where and why we are taking read locks. Most drivers will not need rcu_read_locks here and further XDP drivers already have rcu_read_locks in their code paths for reading xdp programs on RX side so this makes it symmetric where we don't have half of rcu critical sections define in driver and the other half in devmap. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/1580084042-11598-4-git-send-email-john.fastabend@gmail.com |
|
|
John Fastabend
|
42a84a8cd0 |
bpf, xdp: Update devmap comments to reflect napi/rcu usage
Now that we rely on synchronize_rcu and call_rcu waiting to
exit perempt-disable regions (NAPI) lets update the comments
to reflect this.
Fixes:
|
|
|
Vasily Averin
|
90435a7891 |
bpf: map_seq_next should always increase position index
If seq_file .next fuction does not change position index, read after some lseek can generate an unexpected output. See also: https://bugzilla.kernel.org/show_bug.cgi?id=206283 v1 -> v2: removed missed increment in end of function Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/eca84fdd-c374-a154-d874-6c7b55fc3bc4@virtuozzo.com |
|
|
Jiri Olsa
|
e9b4e606c2 |
bpf: Allow to resolve bpf trampoline and dispatcher in unwind
When unwinding the stack we need to identify each address to successfully continue. Adding latch tree to keep trampolines for quick lookup during the unwind. The patch uses first 48 bytes for latch tree node, leaving 4048 bytes from the rest of the page for trampoline or dispatcher generated code. It's still enough not to affect trampoline and dispatcher progs maximum counts. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200123161508.915203-3-jolsa@kernel.org |
|
|
Jiri Olsa
|
84ad7a7ab6 |
bpf: Allow BTF ctx access for string pointers
When accessing the context we allow access to arguments with scalar type and pointer to struct. But we deny access for pointer to scalar type, which is the case for many functions. Alexei suggested to take conservative approach and allow currently only string pointer access, which is the case for most functions now: Adding check if the pointer is to string type and allow access to it. Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200123161508.915203-2-jolsa@kernel.org |
|
|
Amol Grover
|
485ec2ea9c |
bpf, devmap: Pass lockdep expression to RCU lists
head is traversed using hlist_for_each_entry_rcu outside an RCU
read-side critical section but under the protection of dtab->index_lock.
Hence, add corresponding lockdep expression to silence false-positive
lockdep warnings, and harden RCU lists.
Fixes:
|
|
|
David S. Miller
|
954b3c4397 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-01-22 The following pull-request contains BPF updates for your *net-next* tree. We've added 92 non-merge commits during the last 16 day(s) which contain a total of 320 files changed, 7532 insertions(+), 1448 deletions(-). The main changes are: 1) function by function verification and program extensions from Alexei. 2) massive cleanup of selftests/bpf from Toke and Andrii. 3) batched bpf map operations from Brian and Yonghong. 4) tcp congestion control in bpf from Martin. 5) bulking for non-map xdp_redirect form Toke. 6) bpf_send_signal_thread helper from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Martin KaFai Lau
|
5576b991e9 |
bpf: Add BPF_FUNC_jiffies64
This patch adds a helper to read the 64bit jiffies. It will be used in a later patch to implement the bpf_cubic.c. The helper is inlined for jit_requested and 64 BITS_PER_LONG as the map_gen_lookup(). Other cases could be considered together with map_gen_lookup() if needed. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200122233646.903260-1-kafai@fb.com |
|
|
Alexei Starovoitov
|
be8704ff07 |
bpf: Introduce dynamic program extensions
Introduce dynamic program extensions. The users can load additional BPF functions and replace global functions in previously loaded BPF programs while these programs are executing. Global functions are verified individually by the verifier based on their types only. Hence the global function in the new program which types match older function can safely replace that corresponding function. This new function/program is called 'an extension' of old program. At load time the verifier uses (attach_prog_fd, attach_btf_id) pair to identify the function to be replaced. The BPF program type is derived from the target program into extension program. Technically bpf_verifier_ops is copied from target program. The BPF_PROG_TYPE_EXT program type is a placeholder. It has empty verifier_ops. The extension program can call the same bpf helper functions as target program. Single BPF_PROG_TYPE_EXT type is used to extend XDP, SKB and all other program types. The verifier allows only one level of replacement. Meaning that the extension program cannot recursively extend an extension. That also means that the maximum stack size is increasing from 512 to 1024 bytes and maximum function nesting level from 8 to 16. The programs don't always consume that much. The stack usage is determined by the number of on-stack variables used by the program. The verifier could have enforced 512 limit for combined original plus extension program, but it makes for difficult user experience. The main use case for extensions is to provide generic mechanism to plug external programs into policy program or function call chaining. BPF trampoline is used to track both fentry/fexit and program extensions because both are using the same nop slot at the beginning of every BPF function. Attaching fentry/fexit to a function that was replaced is not allowed. The opposite is true as well. Replacing a function that currently being analyzed with fentry/fexit is not allowed. The executable page allocated by BPF trampoline is not used by program extensions. This inefficiency will be optimized in future patches. Function by function verification of global function supports scalars and pointer to context only. Hence program extensions are supported for such class of global functions only. In the future the verifier will be extended with support to pointers to structures, arrays with sizes, etc. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200121005348.2769920-2-ast@kernel.org |
|
|
Alexei Starovoitov
|
f59bbfc2f6 |
bpf: Fix error path under memory pressure
Restore the 'if (env->cur_state)' check that was incorrectly removed during
code move. Under memory pressure env->cur_state can be freed and zeroed inside
do_check(). Hence the check is necessary.
Fixes:
|
|
|
Alexei Starovoitov
|
05d57f1793 |
bpf: Fix trampoline usage in preempt
Though the second half of trampoline page is unused a task could be
preempted in the middle of the first half of trampoline and two
updates to trampoline would change the code from underneath the
preempted task. Hence wait for tasks to voluntarily schedule or go
to userspace. Add similar wait before freeing the trampoline.
Fixes:
|
|
|
Al Viro
|
b87121dd3f |
bpf: don't bother with getname/kern_path - use user_path_at
kernel/bpf/inode.c misuses kern_path...() - it's much simpler (and more efficient, on top of that) to use user_path...() counterparts rather than bothering with doing getname() manually. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200120232858.GF8904@ZenIV.linux.org.uk |
|
|
Brian Vazquez
|
2e3a94aa2b |
bpf: Fix memory leaks in generic update/delete batch ops
Generic update/delete batch ops functions were using __bpf_copy_key
without properly freeing the memory. Handle the memory allocation and
copy_from_user separately.
Fixes:
|
|
|
David S. Miller
|
b3f7e3f23a | Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net | |
|
YueHaibing
|
81f2b572cf |
bpf: Remove set but not used variable 'first_key'
kernel/bpf/syscall.c: In function generic_map_lookup_batch: kernel/bpf/syscall.c:1339:7: warning: variable first_key set but not used [-Wunused-but-set-variable] It is never used, so remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Brian Vazquez <brianvv@google.com> Link: https://lore.kernel.org/bpf/20200116145300.59056-1-yuehaibing@huawei.com |
|
|
Jesper Dangaard Brouer
|
58aa94f922 |
devmap: Adjust tracepoint for map-less queue flush
Now that we don't have a reference to a devmap when flushing the device bulk queue, let's change the the devmap_xmit tracepoint to remote the map_id and map_index fields entirely. Rearrange the fields so 'drops' and 'sent' stay in the same position in the tracepoint struct, to make it possible for the xdp_monitor utility to read both the old and the new format. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/157918768613.1458396.9165902403373826572.stgit@toke.dk |
|
|
Toke Høiland-Jørgensen
|
1d233886dd |
xdp: Use bulking for non-map XDP_REDIRECT and consolidate code paths
Since the bulk queue used by XDP_REDIRECT now lives in struct net_device, we can re-use the bulking for the non-map version of the bpf_redirect() helper. This is a simple matter of having xdp_do_redirect_slow() queue the frame on the bulk queue instead of sending it out with __bpf_tx_xdp(). Unfortunately we can't make the bpf_redirect() helper return an error if the ifindex doesn't exit (as bpf_redirect_map() does), because we don't have a reference to the network namespace of the ingress device at the time the helper is called. So we have to leave it as-is and keep the device lookup in xdp_do_redirect_slow(). Since this leaves less reason to have the non-map redirect code in a separate function, so we get rid of the xdp_do_redirect_slow() function entirely. This does lose us the tracepoint disambiguation, but fortunately the xdp_redirect and xdp_redirect_map tracepoints use the same tracepoint entry structures. This means both can contain a map index, so we can just amend the tracepoint definitions so we always emit the xdp_redirect(_err) tracepoints, but with the map ID only populated if a map is present. This means we retire the xdp_redirect_map(_err) tracepoints entirely, but keep the definitions around in case someone is still listening for them. With this change, the performance of the xdp_redirect sample program goes from 5Mpps to 8.4Mpps (a 68% increase). Since the flush functions are no longer map-specific, rename the flush() functions to drop _map from their names. One of the renamed functions is the xdp_do_flush_map() callback used in all the xdp-enabled drivers. To keep from having to update all drivers, use a #define to keep the old name working, and only update the virtual drivers in this patch. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/157918768505.1458396.17518057312953572912.stgit@toke.dk |
|
|
Toke Høiland-Jørgensen
|
75ccae62cb |
xdp: Move devmap bulk queue into struct net_device
Commit
|
|
|
Yonghong Song
|
057996380a |
bpf: Add batch ops to all htab bpf map
htab can't use generic batch support due some problematic behaviours inherent to the data structre, i.e. while iterating the bpf map a concurrent program might delete the next entry that batch was about to use, in that case there's no easy solution to retrieve the next entry, the issue has been discussed multiple times (see [1] and [2]). The only way hmap can be traversed without the problem previously exposed is by making sure that the map is traversing entire buckets. This commit implements those strict requirements for hmap, the implementation follows the same interaction that generic support with some exceptions: - If keys/values buffer are not big enough to traverse a bucket, ENOSPC will be returned. - out_batch contains the value of the next bucket in the iteration, not the next key, but this is transparent for the user since the user should never use out_batch for other than bpf batch syscalls. This commits implements BPF_MAP_LOOKUP_BATCH and adds support for new command BPF_MAP_LOOKUP_AND_DELETE_BATCH. Note that for update/delete batch ops it is possible to use the generic implementations. [1] https://lore.kernel.org/bpf/20190724165803.87470-1-brianvv@google.com/ [2] https://lore.kernel.org/bpf/20190906225434.3635421-1-yhs@fb.com/ Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200115184308.162644-6-brianvv@google.com |
|
|
Brian Vazquez
|
c60f2d2861 |
bpf: Add lookup and update batch ops to arraymap
This adds the generic batch ops functionality to bpf arraymap, note that since deletion is not a valid operation for arraymap, only batch and lookup are added. Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200115184308.162644-5-brianvv@google.com |
|
|
Brian Vazquez
|
aa2e93b8e5 |
bpf: Add generic support for update and delete batch ops
This commit adds generic support for update and delete batch ops that can be used for almost all the bpf maps. These commands share the same UAPI attr that lookup and lookup_and_delete batch ops use and the syscall commands are: BPF_MAP_UPDATE_BATCH BPF_MAP_DELETE_BATCH The main difference between update/delete and lookup batch ops is that for update/delete keys/values must be specified for userspace and because of that, neither in_batch nor out_batch are used. Suggested-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200115184308.162644-4-brianvv@google.com |
|
|
Brian Vazquez
|
cb4d03ab49 |
bpf: Add generic support for lookup batch op
This commit introduces generic support for the bpf_map_lookup_batch.
This implementation can be used by almost all the bpf maps since its core
implementation is relying on the existing map_get_next_key and
map_lookup_elem. The bpf syscall subcommand introduced is:
BPF_MAP_LOOKUP_BATCH
The UAPI attribute is:
struct { /* struct used by BPF_MAP_*_BATCH commands */
__aligned_u64 in_batch; /* start batch,
* NULL to start from beginning
*/
__aligned_u64 out_batch; /* output: next start batch */
__aligned_u64 keys;
__aligned_u64 values;
__u32 count; /* input/output:
* input: # of key/value
* elements
* output: # of filled elements
*/
__u32 map_fd;
__u64 elem_flags;
__u64 flags;
} batch;
in_batch/out_batch are opaque values use to communicate between
user/kernel space, in_batch/out_batch must be of key_size length.
To start iterating from the beginning in_batch must be null,
count is the # of key/value elements to retrieve. Note that the 'keys'
buffer must be a buffer of key_size * count size and the 'values' buffer
must be value_size * count, where value_size must be aligned to 8 bytes
by userspace if it's dealing with percpu maps. 'count' will contain the
number of keys/values successfully retrieved. Note that 'count' is an
input/output variable and it can contain a lower value after a call.
If there's no more entries to retrieve, ENOENT will be returned. If error
is ENOENT, count might be > 0 in case it copied some values but there were
no more entries to retrieve.
Note that if the return code is an error and not -EFAULT,
count indicates the number of elements successfully processed.
Suggested-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115184308.162644-3-brianvv@google.com
|
|
|
Brian Vazquez
|
15c14a3dca |
bpf: Add bpf_map_{value_size, update_value, map_copy_value} functions
This commit moves reusable code from map_lookup_elem and map_update_elem to avoid code duplication in kernel/bpf/syscall.c. Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200115184308.162644-2-brianvv@google.com |
|
|
Daniel Borkmann
|
0af2ffc93a |
bpf: Fix incorrect verifier simulation of ARSH under ALU32
Anatoly has been fuzzing with kBdysch harness and reported a hang in one of the outcomes: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (85) call bpf_get_socket_cookie#46 1: R0_w=invP(id=0) R10=fp0 1: (57) r0 &= 808464432 2: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0 2: (14) w0 -= 810299440 3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0 3: (c4) w0 s>>= 1 4: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 4: (76) if w0 s>= 0x30303030 goto pc+216 221: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 221: (95) exit processed 6 insns (limit 1000000) [...] Taking a closer look, the program was xlated as follows: # ./bpftool p d x i 12 0: (85) call bpf_get_socket_cookie#7800896 1: (bf) r6 = r0 2: (57) r6 &= 808464432 3: (14) w6 -= 810299440 4: (c4) w6 s>>= 1 5: (76) if w6 s>= 0x30303030 goto pc+216 6: (05) goto pc-1 7: (05) goto pc-1 8: (05) goto pc-1 [...] 220: (05) goto pc-1 221: (05) goto pc-1 222: (95) exit Meaning, the visible effect is very similar to |
|
|
Martin KaFai Lau
|
3b4130418f |
bpf: Fix seq_show for BPF_MAP_TYPE_STRUCT_OPS
Instead of using bpf_struct_ops_map_lookup_elem() which is
not implemented, bpf_struct_ops_map_seq_show_elem() should
also use bpf_struct_ops_map_sys_lookup_elem() which does
an inplace update to the value. The change allocates
a value to pass to bpf_struct_ops_map_sys_lookup_elem().
[root@arch-fb-vm1 bpf]# cat /sys/fs/bpf/dctcp
{{{1}},BPF_STRUCT_OPS_STATE_INUSE,{{00000000df93eebc,00000000df93eebc},0,2, ...
Fixes:
|
|
|
Alexei Starovoitov
|
51c39bb1d5 |
bpf: Introduce function-by-function verification
New llvm and old llvm with libbpf help produce BTF that distinguish global and
static functions. Unlike arguments of static function the arguments of global
functions cannot be removed or optimized away by llvm. The compiler has to use
exactly the arguments specified in a function prototype. The argument type
information allows the verifier validate each global function independently.
For now only supported argument types are pointer to context and scalars. In
the future pointers to structures, sizes, pointer to packet data can be
supported as well. Consider the following example:
static int f1(int ...)
{
...
}
int f3(int b);
int f2(int a)
{
f1(a) + f3(a);
}
int f3(int b)
{
...
}
int main(...)
{
f1(...) + f2(...) + f3(...);
}
The verifier will start its safety checks from the first global function f2().
It will recursively descend into f1() because it's static. Then it will check
that arguments match for the f3() invocation inside f2(). It will not descend
into f3(). It will finish f2() that has to be successfully verified for all
possible values of 'a'. Then it will proceed with f3(). That function also has
to be safe for all possible values of 'b'. Then it will start subprog 0 (which
is main() function). It will recursively descend into f1() and will skip full
check of f2() and f3(), since they are global. The order of processing global
functions doesn't affect safety, since all global functions must be proven safe
based on their arguments only.
Such function by function verification can drastically improve speed of the
verification and reduce complexity.
Note that the stack limit of 512 still applies to the call chain regardless whether
functions were static or global. The nested level of 8 also still applies. The
same recursion prevention checks are in place as well.
The type information and static/global kind is preserved after the verification
hence in the above example global function f2() and f3() can be replaced later
by equivalent functions with the same types that are loaded and verified later
without affecting safety of this main() program. Such replacement (re-linking)
of global functions is a subject of future patches.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200110064124.1760511-3-ast@kernel.org
|
|
|
David S. Miller
|
a2d6d7ae59 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
The ungrafting from PRIO bug fixes in net, when merged into net-next, merge cleanly but create a build failure. The resolution used here is from Petr Machata. Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Martin KaFai Lau
|
0baf26b0fc |
bpf: tcp: Support tcp_congestion_ops in bpf
This patch makes "struct tcp_congestion_ops" to be the first user of BPF STRUCT_OPS. It allows implementing a tcp_congestion_ops in bpf. The BPF implemented tcp_congestion_ops can be used like regular kernel tcp-cc through sysctl and setsockopt. e.g. [root@arch-fb-vm1 bpf]# sysctl -a | egrep congestion net.ipv4.tcp_allowed_congestion_control = reno cubic bpf_cubic net.ipv4.tcp_available_congestion_control = reno bic cubic bpf_cubic net.ipv4.tcp_congestion_control = bpf_cubic There has been attempt to move the TCP CC to the user space (e.g. CCP in TCP). The common arguments are faster turn around, get away from long-tail kernel versions in production...etc, which are legit points. BPF has been the continuous effort to join both kernel and userspace upsides together (e.g. XDP to gain the performance advantage without bypassing the kernel). The recent BPF advancements (in particular BTF-aware verifier, BPF trampoline, BPF CO-RE...) made implementing kernel struct ops (e.g. tcp cc) possible in BPF. It allows a faster turnaround for testing algorithm in the production while leveraging the existing (and continue growing) BPF feature/framework instead of building one specifically for userspace TCP CC. This patch allows write access to a few fields in tcp-sock (in bpf_tcp_ca_btf_struct_access()). The optional "get_info" is unsupported now. It can be added later. One possible way is to output the info with a btf-id to describe the content. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109003508.3856115-1-kafai@fb.com |
|
|
Martin KaFai Lau
|
85d33df357 |
bpf: Introduce BPF_MAP_TYPE_STRUCT_OPS
The patch introduces BPF_MAP_TYPE_STRUCT_OPS. The map value
is a kernel struct with its func ptr implemented in bpf prog.
This new map is the interface to register/unregister/introspect
a bpf implemented kernel struct.
The kernel struct is actually embedded inside another new struct
(or called the "value" struct in the code). For example,
"struct tcp_congestion_ops" is embbeded in:
struct bpf_struct_ops_tcp_congestion_ops {
refcount_t refcnt;
enum bpf_struct_ops_state state;
struct tcp_congestion_ops data; /* <-- kernel subsystem struct here */
}
The map value is "struct bpf_struct_ops_tcp_congestion_ops".
The "bpftool map dump" will then be able to show the
state ("inuse"/"tobefree") and the number of subsystem's refcnt (e.g.
number of tcp_sock in the tcp_congestion_ops case). This "value" struct
is created automatically by a macro. Having a separate "value" struct
will also make extending "struct bpf_struct_ops_XYZ" easier (e.g. adding
"void (*init)(void)" to "struct bpf_struct_ops_XYZ" to do some
initialization works before registering the struct_ops to the kernel
subsystem). The libbpf will take care of finding and populating the
"struct bpf_struct_ops_XYZ" from "struct XYZ".
Register a struct_ops to a kernel subsystem:
1. Load all needed BPF_PROG_TYPE_STRUCT_OPS prog(s)
2. Create a BPF_MAP_TYPE_STRUCT_OPS with attr->btf_vmlinux_value_type_id
set to the btf id "struct bpf_struct_ops_tcp_congestion_ops" of the
running kernel.
Instead of reusing the attr->btf_value_type_id,
btf_vmlinux_value_type_id s added such that attr->btf_fd can still be
used as the "user" btf which could store other useful sysadmin/debug
info that may be introduced in the furture,
e.g. creation-date/compiler-details/map-creator...etc.
3. Create a "struct bpf_struct_ops_tcp_congestion_ops" object as described
in the running kernel btf. Populate the value of this object.
The function ptr should be populated with the prog fds.
4. Call BPF_MAP_UPDATE with the object created in (3) as
the map value. The key is always "0".
During BPF_MAP_UPDATE, the code that saves the kernel-func-ptr's
args as an array of u64 is generated. BPF_MAP_UPDATE also allows
the specific struct_ops to do some final checks in "st_ops->init_member()"
(e.g. ensure all mandatory func ptrs are implemented).
If everything looks good, it will register this kernel struct
to the kernel subsystem. The map will not allow further update
from this point.
Unregister a struct_ops from the kernel subsystem:
BPF_MAP_DELETE with key "0".
Introspect a struct_ops:
BPF_MAP_LOOKUP_ELEM with key "0". The map value returned will
have the prog _id_ populated as the func ptr.
The map value state (enum bpf_struct_ops_state) will transit from:
INIT (map created) =>
INUSE (map updated, i.e. reg) =>
TOBEFREE (map value deleted, i.e. unreg)
The kernel subsystem needs to call bpf_struct_ops_get() and
bpf_struct_ops_put() to manage the "refcnt" in the
"struct bpf_struct_ops_XYZ". This patch uses a separate refcnt
for the purose of tracking the subsystem usage. Another approach
is to reuse the map->refcnt and then "show" (i.e. during map_lookup)
the subsystem's usage by doing map->refcnt - map->usercnt to filter out
the map-fd/pinned-map usage. However, that will also tie down the
future semantics of map->refcnt and map->usercnt.
The very first subsystem's refcnt (during reg()) holds one
count to map->refcnt. When the very last subsystem's refcnt
is gone, it will also release the map->refcnt. All bpf_prog will be
freed when the map->refcnt reaches 0 (i.e. during map_free()).
Here is how the bpftool map command will look like:
[root@arch-fb-vm1 bpf]# bpftool map show
6: struct_ops name dctcp flags 0x0
key 4B value 256B max_entries 1 memlock 4096B
btf_id 6
[root@arch-fb-vm1 bpf]# bpftool map dump id 6
[{
"value": {
"refcnt": {
"refs": {
"counter": 1
}
},
"state": 1,
"data": {
"list": {
"next": 0,
"prev": 0
},
"key": 0,
"flags": 2,
"init": 24,
"release": 0,
"ssthresh": 25,
"cong_avoid": 30,
"set_state": 27,
"cwnd_event": 28,
"in_ack_event": 26,
"undo_cwnd": 29,
"pkts_acked": 0,
"min_tso_segs": 0,
"sndbuf_expand": 0,
"cong_control": 0,
"get_info": 0,
"name": [98,112,102,95,100,99,116,99,112,0,0,0,0,0,0,0
],
"owner": 0
}
}
}
]
Misc Notes:
* bpf_struct_ops_map_sys_lookup_elem() is added for syscall lookup.
It does an inplace update on "*value" instead returning a pointer
to syscall.c. Otherwise, it needs a separate copy of "zero" value
for the BPF_STRUCT_OPS_STATE_INIT to avoid races.
* The bpf_struct_ops_map_delete_elem() is also called without
preempt_disable() from map_delete_elem(). It is because
the "->unreg()" may requires sleepable context, e.g.
the "tcp_unregister_congestion_control()".
* "const" is added to some of the existing "struct btf_func_model *"
function arg to avoid a compiler warning caused by this patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003505.3855919-1-kafai@fb.com
|
|
|
Martin KaFai Lau
|
27ae7997a6 |
bpf: Introduce BPF_PROG_TYPE_STRUCT_OPS
This patch allows the kernel's struct ops (i.e. func ptr) to be implemented in BPF. The first use case in this series is the "struct tcp_congestion_ops" which will be introduced in a latter patch. This patch introduces a new prog type BPF_PROG_TYPE_STRUCT_OPS. The BPF_PROG_TYPE_STRUCT_OPS prog is verified against a particular func ptr of a kernel struct. The attr->attach_btf_id is the btf id of a kernel struct. The attr->expected_attach_type is the member "index" of that kernel struct. The first member of a struct starts with member index 0. That will avoid ambiguity when a kernel struct has multiple func ptrs with the same func signature. For example, a BPF_PROG_TYPE_STRUCT_OPS prog is written to implement the "init" func ptr of the "struct tcp_congestion_ops". The attr->attach_btf_id is the btf id of the "struct tcp_congestion_ops" of the _running_ kernel. The attr->expected_attach_type is 3. The ctx of BPF_PROG_TYPE_STRUCT_OPS is an array of u64 args saved by arch_prepare_bpf_trampoline that will be done in the next patch when introducing BPF_MAP_TYPE_STRUCT_OPS. "struct bpf_struct_ops" is introduced as a common interface for the kernel struct that supports BPF_PROG_TYPE_STRUCT_OPS prog. The supporting kernel struct will need to implement an instance of the "struct bpf_struct_ops". The supporting kernel struct also needs to implement a bpf_verifier_ops. During BPF_PROG_LOAD, bpf_struct_ops_find() will find the right bpf_verifier_ops by searching the attr->attach_btf_id. A new "btf_struct_access" is also added to the bpf_verifier_ops such that the supporting kernel struct can optionally provide its own specific check on accessing the func arg (e.g. provide limited write access). After btf_vmlinux is parsed, the new bpf_struct_ops_init() is called to initialize some values (e.g. the btf id of the supporting kernel struct) and it can only be done once the btf_vmlinux is available. The R0 checks at BPF_EXIT is excluded for the BPF_PROG_TYPE_STRUCT_OPS prog if the return type of the prog->aux->attach_func_proto is "void". Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109003503.3855825-1-kafai@fb.com |
|
|
Martin KaFai Lau
|
976aba002f |
bpf: Support bitfield read access in btf_struct_access
This patch allows bitfield access as a scalar. It checks "off + size > t->size" to avoid accessing bitfield end up accessing beyond the struct. This check is done outside of the loop since it is applicable to all access. It also takes this chance to break early on the "off < moff" case. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109003501.3855427-1-kafai@fb.com |
|
|
Martin KaFai Lau
|
218b3f65f9 |
bpf: Add enum support to btf_ctx_access()
It allows bpf prog (e.g. tracing) to attach to a kernel function that takes enum argument. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109003459.3855366-1-kafai@fb.com |
|
|
Martin KaFai Lau
|
275517ff45 |
bpf: Avoid storing modifier to info->btf_id
info->btf_id expects the btf_id of a struct, so it should store the final result after skipping modifiers (if any). It also takes this chanace to add a missing newline in one of the bpf_log() messages. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109003456.3855176-1-kafai@fb.com |
|
|
Martin KaFai Lau
|
65726b5b7e |
bpf: Save PTR_TO_BTF_ID register state when spilling to stack
This patch makes the verifier save the PTR_TO_BTF_ID register state when spilling to the stack. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109003454.3854870-1-kafai@fb.com |
|
|
Daniel Borkmann
|
6d4f151acf |
bpf: Fix passing modified ctx to ld/abs/ind instruction
Anatoly has been fuzzing with kBdysch harness and reported a KASAN slab oob in one of the outcomes: [...] [ 77.359642] BUG: KASAN: slab-out-of-bounds in bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.360463] Read of size 4 at addr ffff8880679bac68 by task bpf/406 [ 77.361119] [ 77.361289] CPU: 2 PID: 406 Comm: bpf Not tainted 5.5.0-rc2-xfstests-00157-g2187f215eba #1 [ 77.362134] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 77.362984] Call Trace: [ 77.363249] dump_stack+0x97/0xe0 [ 77.363603] print_address_description.constprop.0+0x1d/0x220 [ 77.364251] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.365030] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.365860] __kasan_report.cold+0x37/0x7b [ 77.366365] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.366940] kasan_report+0xe/0x20 [ 77.367295] bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.367821] ? bpf_skb_load_helper_8+0xf0/0xf0 [ 77.368278] ? mark_lock+0xa3/0x9b0 [ 77.368641] ? kvm_sched_clock_read+0x14/0x30 [ 77.369096] ? sched_clock+0x5/0x10 [ 77.369460] ? sched_clock_cpu+0x18/0x110 [ 77.369876] ? bpf_skb_load_helper_8+0xf0/0xf0 [ 77.370330] ___bpf_prog_run+0x16c0/0x28f0 [ 77.370755] __bpf_prog_run32+0x83/0xc0 [ 77.371153] ? __bpf_prog_run64+0xc0/0xc0 [ 77.371568] ? match_held_lock+0x1b/0x230 [ 77.371984] ? rcu_read_lock_held+0xa1/0xb0 [ 77.372416] ? rcu_is_watching+0x34/0x50 [ 77.372826] sk_filter_trim_cap+0x17c/0x4d0 [ 77.373259] ? sock_kzfree_s+0x40/0x40 [ 77.373648] ? __get_filter+0x150/0x150 [ 77.374059] ? skb_copy_datagram_from_iter+0x80/0x280 [ 77.374581] ? do_raw_spin_unlock+0xa5/0x140 [ 77.375025] unix_dgram_sendmsg+0x33a/0xa70 [ 77.375459] ? do_raw_spin_lock+0x1d0/0x1d0 [ 77.375893] ? unix_peer_get+0xa0/0xa0 [ 77.376287] ? __fget_light+0xa4/0xf0 [ 77.376670] __sys_sendto+0x265/0x280 [ 77.377056] ? __ia32_sys_getpeername+0x50/0x50 [ 77.377523] ? lock_downgrade+0x350/0x350 [ 77.377940] ? __sys_setsockopt+0x2a6/0x2c0 [ 77.378374] ? sock_read_iter+0x240/0x240 [ 77.378789] ? __sys_socketpair+0x22a/0x300 [ 77.379221] ? __ia32_sys_socket+0x50/0x50 [ 77.379649] ? mark_held_locks+0x1d/0x90 [ 77.380059] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 77.380536] __x64_sys_sendto+0x74/0x90 [ 77.380938] do_syscall_64+0x68/0x2a0 [ 77.381324] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 77.381878] RIP: 0033:0x44c070 [...] After further debugging, turns out while in case of other helper functions we disallow passing modified ctx, the special case of ld/abs/ind instruction which has similar semantics (except r6 being the ctx argument) is missing such check. Modified ctx is impossible here as bpf_skb_load_helper_8_no_cache() and others are expecting skb fields in original position, hence, add check_ctx_reg() to reject any modified ctx. Issue was first introduced back in |
|
|
Roman Gushchin
|
e10360f815 |
bpf: cgroup: prevent out-of-order release of cgroup bpf
Before commit |
|
|
David S. Miller
|
31d518f35e |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
David S. Miller
|
2bbc078f81 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-12-27 The following pull-request contains BPF updates for your *net-next* tree. We've added 127 non-merge commits during the last 17 day(s) which contain a total of 110 files changed, 6901 insertions(+), 2721 deletions(-). There are three merge conflicts. Conflicts and resolution looks as follows: 1) Merge conflict in net/bpf/test_run.c: There was a tree-wide cleanup |
|
|
Daniel Borkmann
|
f54c7898ed |
bpf: Fix precision tracking for unbounded scalars
Anatoly has been fuzzing with kBdysch harness and reported a hang in one of the outcomes. Upon closer analysis, it turns out that precise scalar value tracking is missing a few precision markings for unknown scalars: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (b7) r0 = 0 1: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0 1: (35) if r0 >= 0xf72e goto pc+0 --> only follow fallthrough 2: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0 2: (35) if r0 >= 0x80fe0000 goto pc+0 --> only follow fallthrough 3: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0 3: (14) w0 -= -536870912 4: R0_w=invP536870912 R1=ctx(id=0,off=0,imm=0) R10=fp0 4: (0f) r1 += r0 5: R0_w=invP536870912 R1_w=inv(id=0) R10=fp0 5: (55) if r1 != 0x104c1500 goto pc+0 --> push other branch for later analysis R0_w=invP536870912 R1_w=inv273421568 R10=fp0 6: R0_w=invP536870912 R1_w=inv273421568 R10=fp0 6: (b7) r0 = 0 7: R0=invP0 R1=inv273421568 R10=fp0 7: (76) if w1 s>= 0xffffff00 goto pc+3 --> only follow goto 11: R0=invP0 R1=inv273421568 R10=fp0 11: (95) exit 6: R0_w=invP536870912 R1_w=inv(id=0) R10=fp0 6: (b7) r0 = 0 propagating r0 7: safe processed 11 insns [...] In the analysis of the second path coming after the successful exit above, the path is being pruned at line 7. Pruning analysis found that both r0 are precise P0 and both R1 are non-precise scalars and given prior path with R1 as non-precise scalar succeeded, this one is therefore safe as well. However, problem is that given condition at insn 7 in the first run, we only followed goto and didn't push the other branch for later analysis, we've never walked the few insns in there and therefore dead-code sanitation rewrites it as goto pc-1, causing the hang depending on the skb address hitting these conditions. The issue is that R1 should have been marked as precise as well such that pruning enforces range check and conluded that new R1 is not in range of old R1. In insn 4, we mark R1 (skb) as unknown scalar via __mark_reg_unbounded() but not mark_reg_unbounded() and therefore regs->precise remains as false. Back in |
|
|
Linus Torvalds
|
78bac77b52 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
including adding a missing ipv6 match description.
2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
Bhat.
3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.
4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.
5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.
6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
Chaignon.
7) Multicast MAC limit test is off by one in qede, from Manish Chopra.
8) Fix established socket lookup race when socket goes from
TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
RCU grace period. From Eric Dumazet.
9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.
10) Fix active backup transition after link failure in bonding, from
Mahesh Bandewar.
11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.
12) Fix wrong interface passed to ->mac_link_up(), from Russell King.
13) Fix DSA egress flooding settings in b53, from Florian Fainelli.
14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.
15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.
16) Reject invalid MTU values in stmmac, from Jose Abreu.
17) Fix refcount leak in error path of u32 classifier, from Davide
Caratti.
18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
Kaseorg.
19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.
20) Disable hardware GRO when XDP is attached to qede, frm Manish
Chopra.
21) Since we encode state in the low pointer bits, dst metrics must be
at least 4 byte aligned, which is not necessarily true on m68k. Add
annotations to fix this, from Geert Uytterhoeven.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
sfc: Include XDP packet headroom in buffer step size.
sfc: fix channel allocation with brute force
net: dst: Force 4-byte alignment of dst_metrics
selftests: pmtu: fix init mtu value in description
hv_netvsc: Fix unwanted rx_table reset
net: phy: ensure that phy IDs are correctly typed
mod_devicetable: fix PHY module format
qede: Disable hardware gro when xdp prog is installed
net: ena: fix issues in setting interrupt moderation params in ethtool
net: ena: fix default tx interrupt moderation interval
net/smc: unregister ib devices in reboot_event
net: stmmac: platform: Fix MDIO init for platforms without PHY
llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
net: hisilicon: Fix a BUG trigered by wrong bytes_compl
net: dsa: ksz: use common define for tag len
s390/qeth: don't return -ENOTSUPP to userspace
s390/qeth: fix promiscuous mode after reset
s390/qeth: handle error due to unsupported transport mode
cxgb4: fix refcount init for TC-MQPRIO offload
tc-testing: initial tdc selftests for cls_u32
...
|
|
|
Andrey Ignatov
|
7dd68b3279 |
bpf: Support replacing cgroup-bpf program in MULTI mode
The common use-case in production is to have multiple cgroup-bpf programs per attach type that cover multiple use-cases. Such programs are attached with BPF_F_ALLOW_MULTI and can be maintained by different people. Order of programs usually matters, for example imagine two egress programs: the first one drops packets and the second one counts packets. If they're swapped the result of counting program will be different. It brings operational challenges with updating cgroup-bpf program(s) attached with BPF_F_ALLOW_MULTI since there is no way to replace a program: * One way to update is to detach all programs first and then attach the new version(s) again in the right order. This introduces an interruption in the work a program is doing and may not be acceptable (e.g. if it's egress firewall); * Another way is attach the new version of a program first and only then detach the old version. This introduces the time interval when two versions of same program are working, what may not be acceptable if a program is not idempotent. It also imposes additional burden on program developers to make sure that two versions of their program can co-exist. Solve the problem by introducing a "replace" mode in BPF_PROG_ATTACH command for cgroup-bpf programs being attached with BPF_F_ALLOW_MULTI flag. This mode is enabled by newly introduced BPF_F_REPLACE attach flag and bpf_attr.replace_bpf_fd attribute to pass fd of the old program to replace That way user can replace any program among those attached with BPF_F_ALLOW_MULTI flag without the problems described above. Details of the new API: * If BPF_F_REPLACE is set but replace_bpf_fd doesn't have valid descriptor of BPF program, BPF_PROG_ATTACH will return corresponding error (EINVAL or EBADF). * If replace_bpf_fd has valid descriptor of BPF program but such a program is not attached to specified cgroup, BPF_PROG_ATTACH will return ENOENT. BPF_F_REPLACE is introduced to make the user intent clear, since replace_bpf_fd alone can't be used for this (its default value, 0, is a valid fd). BPF_F_REPLACE also makes it possible to extend the API in the future (e.g. add BPF_F_BEFORE and BPF_F_AFTER if needed). Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrii Narkyiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/30cd850044a0057bdfcaaf154b7d2f39850ba813.1576741281.git.rdna@fb.com |
|
|
Andrey Ignatov
|
9fab329d6a |
bpf: Remove unused new_flags in hierarchy_allows_attach()
new_flags is unused, remove it. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/2c49b30ab750f93cfef04a1e40b097d70c3a39a1.1576741281.git.rdna@fb.com |