Commit Graph

2127 Commits

Author SHA1 Message Date
Rajneesh Bhardwaj 173943b3da platform/x86: intel_pmc_core: ModPhy core lanes pg status
The PCH implements a number of High Speed I/O (HSIO) lanes that are split
between PCIe*, USB 3.0, SATA, GbE, USB OTG and SSIC. This patch shows the
current power gating status of the available ModPhy Core lanes. This is
done by sending a message to the PMC (MTPMC) that contains the XRAM
register offset for the MPHY_CORE_STS_0 and MPHY_CORE_STS_1 and then by
reading the response sent by the PMC (MFPMC).

While enabling low power modes we often encounter situations when the
ModPhy lanes are not power gated and it becomes hard to debug which lane is
active and which is not in the absence of an external hardware debugger
(JTAG/ITP). This patch eliminates the dependency on an external hardware
debugger for reading the ModPhy Lanes power gating status.

This patch requires PMC_READ_DISABLE setting to be disabled in the platform
bios.

cat /sys/kernel/debug/pmc_core/mphy_lanes_power_gating_status

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-12-13 09:28:56 -08:00
Rajneesh Bhardwaj 0bdfaf429d platform/x86: intel_pmc_core: Add PCH IP Power Gating Status
This patch adds the support for reading the power gating status of various
devices present on Sunrise Point PCH. This is intended to be used for
debugging purpose while tuning the platform for power optimizations and
also to understand which devices (on PCH) are blocking the system to enter
a low power state.

Power Management Controller on Sunrise Point PCH provides access to "PGD
PFET Enable Ack Status Registers (ppfear)". This patch reads and decodes
this register and dumps the output in formatted manner showing various
devices present on the PCH and their "Power Gating" status.

Further documentation can be found in Intel 7th Gen Core family mobile u/y
processor io datasheet volume 2.

Sample output (stripped and not in order):

cat /sys/kernel/debug/pmc_core/pch_ip_power_gating_status
PMC				State: Not Power gated
OPI-DMI				State: Not Power gated
XHCI				State: Power gated
LPSS				State: Power gated
CSME_PSF			State: Not power gated

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-12-13 09:28:55 -08:00
Rajneesh Bhardwaj 8434709ba7 platform/x86: intel_pmc_core: Fix PWRMBASE mask and mmio reg len
On Sunrise Point PCH, the Power Management Controller provides 4K bytes of
memory space for various power management and debug registers. This fix is
needed to access power management & debug registers that are mapped at a
higher offset.

Also, this provides a fix for correctly masking the PWRMBASE as the initial
bits (0-11) are reserved.

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-12-13 09:28:54 -08:00
Lee, Chun-Yi 5241b1938a platform/x86: acer-wmi: Only supports AMW0_GUID1 on acer family
The AMW0_GUID1 wmi is not only found on Acer family but also other
machines like Lenovo, Fujitsu and Medion. In the past, acer-wmi handled
those non-Acer machines by quirks list.

But actually acer-wmi driver was loaded on any machine that had
AMW0_GUID1. This behavior is strange because those machines should be
supported by appropriate wmi drivers. e.g. fujitsu-laptop,
ideapad-laptop.

This patch adds the logic to check the machine that has AMW0_GUID1
should be in Acer/Packard Bell/Gateway white list. But, it still keeps
the quirk list of those supported non-acer machines for backward
compatibility.

Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-12-13 09:28:48 -08:00
Linus Torvalds 86e4ee760e ACPI fix for v4.9-rc5
Fix a recent regression in the 8250_dw serial driver introduced by
 adding a quirk for the APM X-Gene SoC to it which uncovered an issue
 related to the handling of built-in device properties in the core
 ACPI device enumeration code (Heikki Krogerus).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJYJlm+AAoJEILEb/54YlRxpsEP/3IspBg3tGvSDu3YoErtTrQ8
 Te1x9DlHrCiSPacxep0r/NdHcOdmnXaTp6Uo5GMqyvtICSJoe3+nsgwQwy66YzHZ
 HxRxs3NpgeHx7v2vtNZA0CJNOLocmJEunN670to/bsuz0hPcVdZbkZpI7GnRQ6wc
 72h9XLc5Fknr1UDTLYh3ZD3Iw1OQfrG/LOx8bdsfkP2g6HqPZwGBuVIbEQ/q9bkP
 PGd37DrMg9nXfM2wuwKmx2zqJQTceENsW+U5OjzmF2Sy6nFndYWzoRtc6whiKQcc
 CqNSyYsfzodXyUjwa5kI0D6N+jm49T9dBTznKJelsk0BxijELiskwEnjNJAVzDr7
 0A0yDGMvFWShjUqFAc0+uBlTs3yV0Sdjawfm1uE+lCmZId0mN4MTcMNd3MfusQs+
 dL7+pULrrB2UJvLyPiKCkuMVWngLWTnk72tnRlyJXbsc4oX+ljyXqwgn9iAq7Sjn
 vq/pECOKQj0fcLTm2TnKr+VyjPUCul6PDRqFyUGvEa8CjjrrS2piWsg5zBXFQNoM
 f95jliHgT10YQAVtbUKePavXz04GjzTNyLPPPxXT0jEVhLWkHVBtLNCjEX3LZdwW
 duc7ofc4Es9BQ21EDxcwGPeAygVSSuHGOr5Jq+WNdSTEa3sUk+63cqY59rrEAIfy
 cZgEpvlcP3kcgO8U0fF1
 =XF0E
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "Fix a recent regression in the 8250_dw serial driver introduced by
  adding a quirk for the APM X-Gene SoC to it which uncovered an issue
  related to the handling of built-in device properties in the core ACPI
  device enumeration code (Heikki Krogerus)"

* tag 'acpi-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / platform: Add support for build-in properties
2016-11-11 17:02:01 -08:00
Rafael J. Wysocki 66f5854c68 Merge branch 'device-properties'
* device-properties:
  ACPI / platform: Add support for build-in properties
2016-11-11 23:23:02 +01:00
Heikki Krogerus 1571875bee ACPI / platform: Add support for build-in properties
We have a couple of drivers, acpi_apd.c and acpi_lpss.c,
that need to pass extra build-in properties to the devices
they create. Previously the drivers added those properties
to the struct device which is member of the struct
acpi_device, but that does not work. Those properties need
to be assigned to the struct device of the platform device
instead in order for them to become available to the
drivers.

To fix this, this patch changes acpi_create_platform_device
function to take struct property_entry pointer as parameter.

Fixes: 20a875e2e8 (serial: 8250_dw: Add quirk for APM X-Gene SoC)
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-10 00:30:29 +01:00
Vadim Pasternak 304887041d platform/x86: Introduce support for Mellanox hotplug driver
Enable system support for the Mellanox Technologies hotplug platform
driver, which provides support for the next Mellanox basic systems:
"msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410",
"msb7800", "msn2740", "msn2100" and also various number of derivative
systems from the above basic types.
This driver handles hot-plug events for the power suppliers, power
cables and fans for the above systems.

The Kconfig currently controlling compilation of this code is:
driver/platform/x86:config MLX_CPLD_PLATFORM
                       tristate "Mellanox platform hotplug driver support"

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-10-23 07:52:57 -07:00
Azael Avalos 1c80e9603f toshiba-wmi: Fix loading the driver on non Toshiba laptops
Bug 150611 uncovered that the WMI ID used by the toshiba-wmi driver
is not Toshiba specific, and as such, the driver was being loaded
on non Toshiba laptops too.

This patch adds a DMI matching list checking for TOSHIBA as the
vendor, refusing to load if it is not.

Also the WMI GUID was renamed, dropping the TOSHIBA_ prefix, to
better reflect that such GUID is not a Toshiba specific one.

Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-10-19 13:25:54 -07:00
Mika Westerberg 446647d4b9 ideapad-laptop: Add another DMI entry for Yoga 900
This particular laptop has its motherboard replaced and after that, even
with the latest BIOS, some DMI identification strings have become
"INVALID". This includes DMI_PRODUCT_VERSION which results Wifi being
blocked.

It seems that DMI_BOARD_NAME is still valid so use that as an
alternative for Lenovo Yoga 900.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-10-19 13:08:39 -07:00
Linus Torvalds c3f8f7fa8b platform-drivers-x86 for 4.9-2
Fix a Kconfig issue leading potential link failure, and
 add a DMI match for an existing quirk.
 
 asus-wmi:
  - add SERIO_I8042 dependency
 
 ideapad-laptop:
  - Add Lenovo Yoga 910-13IKB to no_hw_rfkill dmi list
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYB7xbAAoJEKbMaAwKp364JZ0IAKbnhIY5UuwIxbShgbKR6o/H
 QOosQwHx+ZzGW4jtYRCEMU1uJH5B4CESMlUzPMJSqkpAz4yZyvaLnMnNL1C2QQkV
 vzn92owyeuNm1VmWxCBL5EbowcMQyAlWtZik9JEwz9G1nlSOlgOhjH4mfugePJLr
 2sCGyfenzXM3otTTB5eGqKg6+4upmf/H8I3HQlu8TUnISslFHahf9czOaFWKwrK6
 tm4nWHzx/nx4PcPQm+EvWT5mlsg/+DhFtyzJIqPZypmBuXR2MRaomqe8AugAXcst
 iVHxve7CWrw/Oiaa4tESdS/P2KhnLzVbDjUaOyAMLyBu670xBnlieH6Q4jJjd4Y=
 =yZrl
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.9-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver fixes from Darren Hart:
 "Fix a Kconfig issue leading potential link failure, and add a DMI
  match for an existing quirk.

  asus-wmi:
   - add SERIO_I8042 dependency

  ideapad-laptop:
   - Add Lenovo Yoga 910-13IKB to no_hw_rfkill dmi list"

* tag 'platform-drivers-x86-v4.9-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  platform/x86: asus-wmi: add SERIO_I8042 dependency
  platform/x86: ideapad-laptop: Add Lenovo Yoga 910-13IKB to no_hw_rfkill dmi list
2016-10-19 11:45:06 -07:00
Linus Torvalds 44dc8c9d68 platform-drivers-x86 for 4.9-1
Cleanups, refactoring, and a couple bug fixes.
 
 intel_pmc_core:
  - avoid boot time warning for !CONFIG_DEBUGFS_FS
 
 intel_pmc_ipc:
  - Convert to use platform_device_register_full
 
 asus-wmi:
  - Filter buggy scan codes on ASUS Q500A
 
 toshiba_bluetooth:
  - Decouple an error checking status code
 
 toshiba_haps:
  - Change logging level from info to debug
  - Split ACPI and HDD protection error handling
 
 asus-laptop:
  - get rid of parse_arg()
 
 asus-wmi:
  - fix asus ux303ub brightness issue
 
 toshiba_acpi:
  - Fix typo in *_cooling_method_set function
  - Change error checking logic from TCI functions
  - Clean up variable declaration
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJX/fUeAAoJEKbMaAwKp364UxoIAMA2UWY9qepIvVW+BA/4vTOH
 jqzLVtH0SnhAe1esjsZ3f2r8F0riXEz/pLWcE7cjV7nbmWQDGvSBAJHyALg5d7CJ
 lAaMjo+glxy2p/0HgHNWvlgXEhRSsc1slbIJMzwk8XWfX39o+LGU0MNar8uRtQML
 TRCFJ73d5maQcQIsZ4hPbPJjzHK3ExyLLimXj5fsFXYnIMBF5YsTfiwdTEnDQmm/
 8FIO+fdogSU+LOrS0/CKrpzB/TchapCdvqn0hTJEdRP9wSqHL4c1nk2c0EVywTZT
 cwHi3ABvoS7Q2gHl58Y02jeEl3e9rFJQ79Sk3Wxr58mpfqy+w1SwPsjyfnXOB4c=
 =AwRb
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform drivers updates from Darren Hart:
 "Cleanups, refactoring, and a couple bug fixes.

  intel_pmc_core:
   - avoid boot time warning for !CONFIG_DEBUGFS_FS

  intel_pmc_ipc:
   - Convert to use platform_device_register_full

  asus-wmi:
   - Filter buggy scan codes on ASUS Q500A

  toshiba_bluetooth:
   - Decouple an error checking status code

  toshiba_haps:
   - Change logging level from info to debug
   - Split ACPI and HDD protection error handling

  asus-laptop:
   - get rid of parse_arg()

  asus-wmi:
   - fix asus ux303ub brightness issue

  toshiba_acpi:
   - Fix typo in *_cooling_method_set function
   - Change error checking logic from TCI functions
   - Clean up variable declaration"

* tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  platform/x86: intel_pmc_core: avoid boot time warning for !CONFIG_DEBUGFS_FS
  platform/x86: intel_pmc_ipc: Convert to use platform_device_register_full
  platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A
  platform/x86: toshiba_bluetooth: Decouple an error checking status code
  platform/x86: toshiba_haps: Change logging level from info to debug
  platform/x86: toshiba_haps: Split ACPI and HDD protection error handling
  platform/x86: asus-laptop: get rid of parse_arg()
  platform/x86: asus-wmi: fix asus ux303ub brightness issue
  platform/x86: toshiba_acpi: Fix typo in *_cooling_method_set function
  platform/x86: toshiba_acpi: Change error checking logic from TCI functions
  platform/x86: toshiba_acpi: Clean up variable declaration
2016-10-13 16:52:39 -07:00
Arnd Bergmann ea893695ec platform/x86: asus-wmi: add SERIO_I8042 dependency
A recent bugfix added a call to i8042_install_filter but did
not add the dependency, leading to possible link errors:

drivers/platform/built-in.o: In function `asus_nb_wmi_quirks':
asus-nb-wmi.c:(.text+0x23af): undefined reference to `i8042_install_filter'

This adds a dependency on SERIO_I8042||SERIO_I8042=n to indicate
that we can build the driver when the i8042 driver is disabled,
but it cannot be built-in when that is a loadable module.

Fixes: b5643539b8 ("platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-10-12 22:59:33 +02:00
Linus Torvalds 2d2474a194 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal managament updates from Zhang Rui:

 - Enhance thermal "userspace" governor to export the reason when a
   thermal event is triggered and delivered to user space. From Srinivas
   Pandruvada

 - Introduce a single TSENS thermal driver for the different versions of
   the TSENS IP that exist, on different qcom msm/apq SoCs'. Support for
   msm8916, msm8960, msm8974 and msm8996 families is also added. From
   Rajendra Nayak

 - Introduce hardware-tracked trip points support to the device tree
   thermal sensor framework. The framework supports an arbitrary number
   of trip points. Whenever the current temperature is changed, the trip
   points immediately below and above the current temperature are found,
   driver callback is invoked to program the hardware to get notified
   when either of the two trip points are triggered. Hardware-tracked
   trip points support for rockchip thermal driver is also added at the
   same time. From Sascha Hauer, Caesar Wang

 - Introduce a new thermal driver, which enables TMU (Thermal Monitor
   Unit) on QorIQ platform. From Jia Hongtao

 - Introduce a new thermal driver for Maxim MAX77620. From Laxman
   Dewangan

 - Introduce a new thermal driver for Intel platforms using WhiskeyCove
   PMIC. From Bin Gao

 - Add mt2701 chip support to MTK thermal driver. From Dawei Chien

 - Enhance Tegra thermal driver to enable soctherm node and set
   "critical", "hot" trips, for Tegra124, Tegra132, Tegra210. From Wei
   Ni

 - Add resume support for tango thermal driver. From Marc Gonzalez

 - several small fixes and improvements for rockchip, qcom, imx, rcar,
   mtk thermal drivers and thermal core code. From Caesar Wang, Keerthy,
   Rocky Hao, Wei Yongjun, Peter Robinson, Bui Duc Phuc, Axel Lin, Hugh
   Kang

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (48 commits)
  thermal: int3403: Process trip change notification
  thermal: int340x: New Interface to read trip and notify
  thermal: user_space gov: Add additional information in uevent
  thermal: Enhance thermal_zone_device_update for events
  arm64: tegra: set hot trips for Tegra210
  arm64: tegra: set critical trips for Tegra210
  arm64: tegra: add soctherm node for Tegra210
  arm64: tegra: set hot trips for Tegra132
  arm64: tegra: set critical trips for Tegra132
  arm64: tegra: use tegra132-soctherm for Tegra132
  arm: tegra: set hot trips for Tegra124
  arm: tegra: set critical trips for Tegra124
  thermal: tegra: add hw-throttle for Tegra132
  thermal: tegra: add hw-throttle function
  of: Add bindings of hw throttle for Tegra soctherm
  thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_register
  thermal: Add Mediatek thermal driver for mt2701.
  dt-bindings: thermal: Add binding document for Mediatek thermal controller
  thermal: max77620: Add thermal driver for reporting junction temp
  thermal: max77620: Add DT binding doc for thermal driver
  ...
2016-10-12 11:05:23 -07:00
Brian Masney 40c30bbf33 platform/x86: ideapad-laptop: Add Lenovo Yoga 910-13IKB to no_hw_rfkill dmi list
The Lenovo Yoga 910-13IKB does not have a hw rfkill switch, and trying
to read the hw rfkill switch through the ideapad module causes it to
always report as blocked.

This commit adds the Lenovo Yoga 910-13IKB to the no_hw_rfkill dmi list,
fixing the WiFI breakage.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-10-12 01:17:47 -07:00
Arnd Bergmann 127595ed21 platform/x86: intel_pmc_core: avoid boot time warning for !CONFIG_DEBUGFS_FS
While looking at a patch that introduced a compile-time warning
"‘pmc_core_dev_state_get’ defined but not used" (I sent a patch
for debugfs to fix it), I noticed that the same patch caused
it in intel_pmc_core also introduced a bogus run-time warning:
"PMC Core: debugfs register failed".

The problem is the IS_ERR_OR_NULL() check that as usual gets
things wrong: when CONFIG_DEBUGFS_FS is disabled,
debugfs_create_dir() fails with an error code, and we don't
need to warn about it, unlike the case in which it returns
NULL.

This reverts the driver to the previous state of not warning
about CONFIG_DEBUGFS_FS being disabled. I chose not to
restore the driver to making a runtime error in debugfs
fatal in pmc_core_probe().

Fixes: df2294fb64 ("intel_pmc_core: Convert to DEFINE_DEBUGFS_ATTRIBUTE")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-10-12 01:12:28 -07:00
Linus Torvalds 4cdf8dbe2d Merge branch 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull uaccess.h prepwork from Al Viro:
 "Preparations to tree-wide switch to use of linux/uaccess.h (which,
  obviously, will allow to start unifying stuff for real). The last step
  there, ie

    PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
    sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
            `git grep -l "$PATT"|grep -v ^include/linux/uaccess.h`

  is not taken here - I would prefer to do it once just before or just
  after -rc1.  However, everything should be ready for it"

* 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  remove a stray reference to asm/uaccess.h in docs
  sparc64: separate extable_64.h, switch elf_64.h to it
  score: separate extable.h, switch module.h to it
  mips: separate extable.h, switch module.h to it
  x86: separate extable.h, switch sections.h to it
  remove stray include of asm/uaccess.h from cacheflush.h
  mn10300: remove a bogus processor.h->uaccess.h include
  xtensa: split uaccess.h into C and asm sides
  bonding: quit messing with IOCTL
  kill __kernel_ds_p off
  mn10300: finish verify_area() off
  frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h
  exceptions: detritus removal
2016-10-11 23:38:39 -07:00
Linus Torvalds 101105b171 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
 ">rename2() work from Miklos + current_time() from Deepa"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: Replace current_fs_time() with current_time()
  fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
  fs: Replace CURRENT_TIME with current_time() for inode timestamps
  fs: proc: Delete inode time initializations in proc_alloc_inode()
  vfs: Add current_time() api
  vfs: add note about i_op->rename changes to porting
  fs: rename "rename2" i_op to "rename"
  vfs: remove unused i_op->rename
  fs: make remaining filesystems use .rename2
  libfs: support RENAME_NOREPLACE in simple_rename()
  fs: support RENAME_NOREPLACE for local filesystems
  ncpfs: fix unused variable warning
2016-10-10 20:16:43 -07:00
Axel Lin ea1a76bad8 platform/x86: intel_pmc_ipc: Convert to use platform_device_register_full
Use platform_device_register_full() instead of open-coded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-09-28 16:33:04 -07:00
Mika Westerberg bba6529ea0 platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists
ACPI WDAT table is the preferred way to use hardware watchdog over the
native iTCO_wdt. Windows only uses this table for its hardware watchdog
implementation so we should be relatively safe to trust it has been
validated by OEMs.

Prevent iTCO watchdog creation if we detect that there is an ACPI WDAT
table.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-28 23:08:08 +02:00
Al Viro 45caf47007 x86: separate extable.h, switch sections.h to it
drivers/platform/x86/dell-smo8800.c is touched due to the following obscenity:
drivers/platform/x86/dell-smo8800.c ->
	linux/interrupt.h ->
		linux/hardirq.h ->
			asm/hardirq.h ->
				linux/irq.h ->
					asm/hw_irq.h ->
						asm/sections.h ->
							asm/uaccess.h
is the only chain of includes pulling asm/uaccess.h there.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:15:23 -04:00
Deepa Dinamani c2050a454c fs: Replace current_fs_time() with current_time()
current_fs_time() uses struct super_block* as an argument.
As per Linus's suggestion, this is changed to take struct
inode* as a parameter instead. This is because the function
is primarily meant for vfs inode timestamps.
Also the function was renamed as per Arnd's suggestion.

Change all calls to current_fs_time() to use the new
current_time() function instead. current_fs_time() will be
deleted.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:06:22 -04:00
Srinivas Pandruvada 0e70f466fb thermal: Enhance thermal_zone_device_update for events
Added one additional parameter to thermal_zone_device_update() to provide
caller with an optional capability to specify reason.
Currently this event is used by user space governor to trigger different
processing based on event code. Also it saves an additional call to read
temperature when the event is received.
The following events are cuurently defined:
- Unspecified event
- New temperature sample
- Trip point violated
- Trip point changed
- thermal device up and down
- thermal device power capability changed

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27 14:35:21 +08:00
Oleksij Rempel b5643539b8 platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A
Some revisions of the ASUS Q500A series have a keyboard related
issue which is reproducible only after Windows with installed ASUS
tools is started.

In this case the Linux side will have a blocked keyboard or
report incorrect or incomplete hotkey events.

To make Linux work properly again, a complete power down
(unplug power supply and remove battery) is needed.

Linux/atkbd after a clean start will get the following code on VOLUME_UP
key: {0xe0, 0x30, 0xe0, 0xb0}. After Windows, the same key will generate
this codes: {0xe1, 0x23, 0xe0, 0x30, 0xe0, 0xb0}. As result atkdb will
be confused by buggy codes.

This patch is filtering this buggy code out.

https://bugzilla.kernel.org/show_bug.cgi?id=119391

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Cc: Alex Henrie <alexhenrie24@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: acpi4asus-user@lists.sourceforge.net
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

[dvhart: Add return after pr_warn to avoid false confirmation of filter]

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-09-23 17:06:20 -07:00
Azael Avalos 28e476d743 platform/x86: toshiba_bluetooth: Decouple an error checking status code
This patch simply decouples the error checking of the ACPI status and
the actual BT status, as those two were nested in an if/else check, but
are completely unrelated.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-09-23 16:21:06 -07:00
Azael Avalos baae5f9157 platform/x86: toshiba_haps: Change logging level from info to debug
Two of the internal functions are printing an info message, one
whenever the HDD protection level changes, and another when the
driver receives an ACPI event.

This patch changes those two prints to debug, as that information
is more pertaining to debuging purposes.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-09-23 16:21:05 -07:00
Azael Avalos 5545544998 platform/x86: toshiba_haps: Split ACPI and HDD protection error handling
Currently the code checking for the ACPI status is mixed along with
the actual HDD protection status check.

This patch splits those two checks as they are not related, printing
an error string in case the ACPI call failed, and then check for
actual HDD protection status.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-09-23 16:21:05 -07:00
Giedrius Statkevičius 6f7e357bf1 platform/x86: asus-laptop: get rid of parse_arg()
parse_arg() duplicates the funcionality of kstrtoint() so use the latter
function instead. There is no funcionality change except that in the
case of input being too big -ERANGE will be returned instead of -EINVAL
which is not bad because -ERANGE makes more sense here. The check for
!count is already done by the sysfs core so no need to duplicate it
again. Also, add some minor corrections to error handling to accommodate
the change in return values (parse_arg returned count if everything
succeeded whereas kstrtoint returns 0 in the same situation)

As a result of this patch asus-laptop.ko size is reduced by almost 1%:
add/remove: 0/1 grow/shrink: 1/6 up/down: 1/-149 (-148)
function                                     old     new   delta
__UNIQUE_ID_vermagic0                         69      70      +1
ls_switch_store                              133     117     -16
ledd_store                                   175     159     -16
display_store                                157     141     -16
ls_level_store                               193     176     -17
gps_store                                    200     178     -22
sysfs_acpi_set.isra                          148     125     -23
parse_arg.part                                39       -     -39
Total: Before=19160, After=19012, chg -0.77%

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-09-23 16:20:44 -07:00
zino lin 999d4376c6 platform/x86: asus-wmi: fix asus ux303ub brightness issue
acpi_video0 doesn't work, asus-wmi brightness interface doesn't work, too.
So, we use native brightness interface to handle the brightness adjustion,
and add quirk_asus_ux303ub.

Signed-off-by: zino lin <linzino7@gmail.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-09-23 16:20:34 -07:00
Azael Avalos fa1bc2a09f platform/x86: toshiba_acpi: Fix typo in *_cooling_method_set function
This patch simply fixes a typo in the error string printed in
the *_cooling_method_set function.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-08-31 17:33:33 -07:00
Azael Avalos 513ee146f6 platform/x86: toshiba_acpi: Change error checking logic from TCI functions
Currently the success/error checking logic is intermixed, making the
code a bit cumbersome to understand.

This patch changes the affected functions to first check for errors
and take appropriate actions, then check for the supported features.

This patch also separates the error check from the acpi_status and
the tci_raw function call error check, as those two are completely
unrelated and were nested in if/else statements.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-08-31 17:33:32 -07:00
Azael Avalos 78429e55e4 platform/x86: toshiba_acpi: Clean up variable declaration
This patch moves all the multiple line variable declaration to a
single line declaration (except variables being initialized)
following the reverse tree order, to conform to the practices
of the kernel.

[dvhart: corrected a couple minor inconsistencies in declaration ordering]

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-08-31 17:32:54 -07:00
Paul Gortmaker da43bf0c21 intel_pmic_gpio: Make explicitly non-modular
The Kconfig entry controlling compilation of this code is:

drivers/platform/x86/Kconfig:config GPIO_INTEL_PMIC
drivers/platform/x86/Kconfig:   bool "Intel PMIC GPIO support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.

We delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

We don't replace module.h with init.h since the file already has that.

Cc: Alek Du <alek.du@intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-08-28 22:31:52 -07:00
Pali Rohár 65a97a67a7 dell-wmi: Ignore WMI event 0xe00e
WMI event 0xe00e is received when battery was removed or inserted.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-08-08 11:00:21 -07:00
Linus Torvalds 731c7d3a20 Merge tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux
Merge drm updates from Dave Airlie:
 "This is the main drm pull request for 4.8.

  I'm down with a cold at the moment so hopefully this isn't in too bad
  a state, I finished pulling stuff last week mostly (nouveau fixes just
  went in today), so only this message should be influenced by illness.
  Apologies to anyone who's major feature I missed :-)

  Core:
        Lockless GEM BO freeing
        Non-blocking atomic work
        Documentation changes (rst/sphinx)
        Prep for new fencing changes
        Simple display helpers
        Master/auth changes
        Register/unregister rework
        Loads of trivial patches/fixes.

  New stuff:
        ARM Mali display driver (not the 3D chip)
        sii902x RGB->HDMI bridge

  Panel:
        Support for new panels
        Improved backlight support

  Bridge:
        Convert ADV7511 to bridge driver
        ADV7533 support
        TC358767 (DSI/DPI to eDP) encoder chip support

  i915:
        BXT support enabled by default
        GVT-g infrastructure
        GuC command submission and fixes
        BXT workarounds
        SKL/BKL workarounds
        Demidlayering device registration
        Thundering herd fixes
        Missing pci ids
        Atomic updates

  amdgpu/radeon:
        ATPX improvements for better dGPU power control on PX systems
        New power features for CZ/BR/ST
        Pipelined BO moves and evictions in TTM
        GPU scheduler improvements
        GPU reset improvements
        Overclocking on dGPUs with amdgpu
        Polaris powermanagement enabled

  nouveau:
        GK20A/GM20B volt and clock improvements.
        Initial support for GP100/GP104 GPUs, GP104 will not yet support
        acceleration due to NVIDIA having not released firmware for them as of yet.

  exynos:
        Exynos5433 SoC with IOMMU support.

  vc4:
        Shader validation for branching

  imx-drm:
        Atomic mode setting conversion
        Reworked DMFC FIFO allocation
        External bridge support

  analogix-dp:
        RK3399 eDP support
        Lots of fixes.

  rockchip:
        Lots of small fixes.

  msm:
        DT bindings cleanups
        Shrinker and madvise support
        ASoC HDMI codec support

  tegra:
        Host1x driver cleanups
        SOR reworking for DP support
        Runtime PM support

  omapdrm:
        PLL enhancements
        Header refactoring
        Gamma table support

  arcgpu:
        Simulator support

  virtio-gpu:
        Atomic modesetting fixes.

  rcar-du:
        Misc fixes.

  mediatek:
        MT8173 HDMI support

  sti:
        ASOC HDMI codec support
        Minor fixes

  fsl-dcu:
        Suspend/resume support
        Bridge support

  amdkfd:
        Minor fixes.

  etnaviv:
        Enable GPU clock gating

  hisilicon:
        Vblank and other fixes"

* tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits)
  drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup
  drm/nouveau/acpi: fix lockup with PCIe runtime PM
  drm/nouveau/acpi: check for function 0x1B before using it
  drm/nouveau/acpi: return supported DSM functions
  drm/nouveau/acpi: ensure matching ACPI handle and supported functions
  drm/nouveau/fbcon: fix font width not divisible by 8
  drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events
  drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce
  drm/amdgpu: add query device id and revision id into system info entry at CGS
  drm/amdgpu: add new definition in bif header
  drm/amd/powerplay: rename smum header guards
  drm/amdgpu: enable UVD context buffer for older HW
  drm/amdgpu: fix default UVD context size
  drm/amdgpu: fix incorrect type of info_id
  drm/amdgpu: make amdgpu_cgs_call_acpi_method as static
  drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build
  drm/amdgpu: enable UVD VM only on polaris
  drm/amdgpu: increase timeout of IB test
  drm/amdgpu: add destroy session when generate VCE destroy msg.
  drm/amd: fix deadlock of job_list_lock V2
  ...
2016-08-01 21:44:08 -04:00
Linus Torvalds 27acbec338 Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
 "Core:
   - min and max timeout improvements, WDOG_HW_RUNNING improvements,
     status funtionality
   - Add a device managed API for watchdog_register_device()

  New watchdog drivers:
   -  Aspeed SoCs
   -  Maxim PMIC MAX77620
   -  Amlogic Meson GXBB SoC

  Enhancements:
   - support for the r8a7796 watchdog device
   - support for F81866 watchdog device
   - support for 5th variation of Apollo Lake
   - support for MCP78S chipset
   - clean-up of softdog.c watchdog device driver
   - pic32-wdt and pic32-dmt fixes
   - Documentation/watchdog: watchdog-test improvements
   - several other fixes and improvements"

* git://www.linux-watchdog.org/linux-watchdog: (50 commits)
  watchdog: gpio_wdt: Fix missing platform_set_drvdata() in gpio_wdt_probe()
  watchdog: core: Clear WDOG_HW_RUNNING before calling the stop function
  watchdog: core: Fix error handling of watchdog_dev_init()
  watchdog: pic32-wdt: Fix return value check in pic32_wdt_drv_probe()
  watchdog: pic32-dmt: Remove .owner field for driver
  watchdog: pic32-wdt: Remove .owner field for driver
  watchdog: renesas-wdt: Add support for the r8a7796 wdt
  Documentation/watchdog: check return value for magic close
  watchdog: sbsa: Drop status function
  watchdog: Implement status function in watchdog core
  watchdog: tangox: Set max_hw_heartbeat_ms instead of max_timeout
  watchdog: change watchdog_need_worker logic
  watchdog: add support for MCP78S chipset in nv_tco
  watchdog: bcm2835_wdt: remove redundant ->set_timeout callback
  watchdog: bcm2835_wdt: constify _ops and _info structures
  dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
  watchdog: Add Meson GXBB Watchdog Driver
  watchdog: qcom: configure BARK time in addition to BITE time
  watchdog: qcom: add option for standalone watchdog not in timer block
  watchdog: qcom: update device tree bindings
  ...
2016-07-31 21:32:22 -04:00
Lukas Wunner 305964b7a0 apple-gmux: Sphinxify docs
Convert asciidoc-formatted docs to rst in accordance with Jonathan's and
Jani's effort to use sphinx for kernel-doc rendering in 4.8.

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/4c1b29986fa77772156b1af0c965d3799e43a47b.1467628307.git.lukas@wunner.de
2016-07-28 10:04:03 +02:00
Linus Torvalds 27b79027bc platform-drivers-x86 for 4.8-1
Several new quirks and tweaks for new platforms to existing laptop drivers. A
 new ACPI virtual power button driver, similar to the intel-hid driver. A rework
 of the dell keymap, using a single sparse keymap for all machines. A few fixes
 and cleanups.
 
 intel-vbtn:
  - new driver for Intel Virtual Button
 
 intel_pmc_core:
  - Convert to DEFINE_DEBUGFS_ATTRIBUTE
 
 fujitsu-laptop:
  - Rework brightness of eco led
 
 asus-wmi:
  - Add quirk_no_rfkill_wapf4 for the Asus X456UA
  - Add quirk_no_rfkill_wapf4 for the Asus X456UF
  - Add quirk_no_rfkill for the Asus Z550MA
  - Add quirk_no_rfkill for the Asus U303LB
  - Add quirk_no_rfkill for the Asus N552VW
  - Create quirk for airplane_mode LED
  - Add ambient light sensor toggle key
 
 asus-wireless:
  - Toggle airplane mode LED
 
 intel_telemetry:
  - Remove Monitor MWAIT feature dependency
 
 intel-hid:
  - Remove duplicated acpi_remove_notify_handler
 
 fujitsu-laptop:
  - Add support for eco LED
  - Support touchpad toggle hotkey on Skylake-based models
  - Remove unused macros
  - Use module name in debug messages
 
 hp-wmi:
  - Fix wifi cannot be hard-unblocked
 
 toshiba_acpi:
  - Bump driver version and update copyright year
  - Remove the position sysfs entry
  - Add IIO interface for accelerometer axis data
 
 dell-wmi:
  - Add a WMI event code for display on/off
  - Generate one sparse keymap for all machines
  - Add information about other WMI event codes
  - Sort WMI event codes and update comments
  - Ignore WMI event code 0xe045
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXl8kKAAoJEKbMaAwKp364UggH/R1vy4IQmvXh4A/VDlAUp4Cs
 6Wi71WTBbzFm63wVdHFZpeXzlzBCLEp+XVQI6M4BSQYulfRCWogiRmV7npLXn8Mv
 M2JnmV87n0u3bHT5Fn920mC0OeTMHV5YaEap8N3ys0Ej56aHEgjsQYJjjSIz1OpM
 1uQTxufiMgUhX0PQskhNnrz+wnIeKatvP/EyxeFsW58T+FXr4xF8VNaqXgNbz1NL
 UcWOh580nE92I1UuYjAnC2bi1oi4x63vNL2xgll8Tc0rRuPJWB15Sc7zxdhVLhqX
 rV9Mjiu8FLKilQgwzPHm3QGb8o54prJZIUtAKp1qunwlDiM3n+5qrIW7+4GUfyo=
 =JSkT
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.8-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x8 platform driver updates from Darren Hart:
 "Several new quirks and tweaks for new platforms to existing laptop
  drivers.  A new ACPI virtual power button driver, similar to the
  intel-hid driver.  A rework of the dell keymap, using a single sparse
  keymap for all machines.  A few fixes and cleanups.

  Summary:

  intel-vbtn:
   - new driver for Intel Virtual Button

  intel_pmc_core:
   - Convert to DEFINE_DEBUGFS_ATTRIBUTE

  fujitsu-laptop:
   - Rework brightness of eco led

  asus-wmi:
   - Add quirk_no_rfkill_wapf4 for the Asus X456UA
   - Add quirk_no_rfkill_wapf4 for the Asus X456UF
   - Add quirk_no_rfkill for the Asus Z550MA
   - Add quirk_no_rfkill for the Asus U303LB
   - Add quirk_no_rfkill for the Asus N552VW
   - Create quirk for airplane_mode LED
   - Add ambient light sensor toggle key

  asus-wireless:
   - Toggle airplane mode LED

  intel_telemetry:
   - Remove Monitor MWAIT feature dependency

  intel-hid:
   - Remove duplicated acpi_remove_notify_handler

  fujitsu-laptop:
   - Add support for eco LED
   - Support touchpad toggle hotkey on Skylake-based models
   - Remove unused macros
   - Use module name in debug messages

  hp-wmi:
   - Fix wifi cannot be hard-unblocked

  toshiba_acpi:
   - Bump driver version and update copyright year
   - Remove the position sysfs entry
   - Add IIO interface for accelerometer axis data

  dell-wmi:
   - Add a WMI event code for display on/off
   - Generate one sparse keymap for all machines
   - Add information about other WMI event codes
   - Sort WMI event codes and update comments
   - Ignore WMI event code 0xe045"

* tag 'platform-drivers-x86-v4.8-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (26 commits)
  intel-vbtn: new driver for Intel Virtual Button
  intel_pmc_core: Convert to DEFINE_DEBUGFS_ATTRIBUTE
  fujitsu-laptop: Rework brightness of eco led
  asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UA
  asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UF
  asus-wmi: Add quirk_no_rfkill for the Asus Z550MA
  asus-wmi: Add quirk_no_rfkill for the Asus U303LB
  asus-wmi: Add quirk_no_rfkill for the Asus N552VW
  asus-wmi: Create quirk for airplane_mode LED
  asus-wireless: Toggle airplane mode LED
  intel_telemetry: Remove Monitor MWAIT feature dependency
  intel-hid: Remove duplicated acpi_remove_notify_handler
  asus-wmi: Add ambient light sensor toggle key
  fujitsu-laptop: Add support for eco LED
  fujitsu-laptop: Support touchpad toggle hotkey on Skylake-based models
  fujitsu-laptop: Remove unused macros
  fujitsu-laptop: Use module name in debug messages
  hp-wmi: Fix wifi cannot be hard-unblocked
  toshiba_acpi: Bump driver version and update copyright year
  toshiba_acpi: Remove the position sysfs entry
  ...
2016-07-26 17:23:08 -07:00
Linus Torvalds 8e466955d6 Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Intel-SoC enhancements (Andy Shevchenko)

   - Intel CPU symbolic model definition rework (Dave Hansen)

   - ... other misc changes"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  x86/sfi: Enable enumeration of SD devices
  x86/pci: Use MRFLD abbreviation for Merrifield
  x86/platform/intel-mid: Make vertical indentation consistent
  x86/platform/intel-mid: Mark regulators explicitly defined
  x86/platform/intel-mid: Rename mrfl.c to mrfld.c
  x86/platform/intel-mid: Enable spidev on Intel Edison boards
  x86/platform/intel-mid: Extend PWRMU to support Penwell
  x86/pci, x86/platform/intel_mid_pci: Remove duplicate power off code
  x86/platform/intel-mid: Add pinctrl for Intel Merrifield
  x86/platform/intel-mid: Enable GPIO expanders on Edison
  x86/platform/intel-mid: Add Power Management Unit driver
  x86/platform/atom/punit: Enable support for Merrifield
  x86/platform/intel_mid_pci: Rework IRQ0 workaround
  x86, thermal: Clean up and fix CPU model detection for intel_soc_dts_thermal
  x86, mmc: Use Intel family name macros for mmc driver
  x86/intel_telemetry: Use Intel family name macros for telemetry driver
  x86/acpi/lss: Use Intel family name macros for the acpi_lpss driver
  x86/cpufreq: Use Intel family name macros for the intel_pstate cpufreq driver
  x86/platform: Use new Intel model number macros
  x86/intel_idle: Use Intel family macros for intel_idle
  ...
2016-07-25 19:15:35 -07:00
AceLan Kao 332e081225 intel-vbtn: new driver for Intel Virtual Button
This driver supports power button event in Intel Virtual Button currently.
New Dell XPS 13 requires this driver for the power button.

This driver is copied/modified from intel-hid.c
Most credit goes to the author of intel-hid.c,
Alex Hung <alex.hung@canonical.com>

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-07-22 13:17:40 -07:00
Yong, Jonathan 334da2d675 x86: Fix Apollo Lake Watchdog address in PMC driver
The TCO I/O base is 40h rather than the usual 30h, and the re_reboot
bit is at ACPIBASE+8.

Signed-off-by: Yong, Jonathan <jonathan.yong@intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-07-17 21:02:15 +02:00
Andy Shevchenko df2294fb64 intel_pmc_core: Convert to DEFINE_DEBUGFS_ATTRIBUTE
Refactor the code to use the recently introduced
DEFINE_DEBUGFS_ATTRIBUTE() macro to eliminate boilerplate code.
Make the absence of DEBUG_FS a non-fatal error.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-07-06 13:23:53 -07:00
Matej Groma 696789343b fujitsu-laptop: Rework brightness of eco led
For the sake of internal consistency, unset maximum brightness of eco
led and make it activatable only on values >= LED_FULL.

Signed-off-by: Matej Groma <matejgroma@gmail.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-07-06 11:31:12 -07:00
João Paulo Rechi Vita 56a37a7200 asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UA
The Asus X456UA has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion.

quirk_no_rfkill prevents asus-wmi from registering RFKill switches at
all for this laptop and allows asus-wireless to drive the LED through
the ASHS ACPI device.  This laptop already has a quirk for setting
WAPF=4, so use quirk_no_rfkill_wapf4, which both disables rfkill and
sets WAPF=4.

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: Angela Traeger <angie@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-07-01 16:05:47 -07:00
João Paulo Rechi Vita a961a285b4 asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UF
The Asus X456UF has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion.

quirk_no_rfkill prevents asus-wmi from registering RFKill switches at
all for this laptop and allows asus-wireless to drive the LED through
the ASHS ACPI device.  This laptop already has a quirk for setting
WAPF=4, so this commit creates a new quirk, quirk_no_rfkill_wapf4, which
both disables rfkill and sets WAPF=4.

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: Carlo Caione <carlo@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-07-01 16:01:42 -07:00
João Paulo Rechi Vita 6b7ff2af52 asus-wmi: Add quirk_no_rfkill for the Asus Z550MA
The Asus Z550MA has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion. quirk_no_rfkill prevents asus-wmi
from registering RFKill switches at all for this laptop and allows
asus-wireless to drive the LED through the ASHS ACPI device.

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: Ming Shuo Chiu <chiu@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-07-01 16:01:41 -07:00
João Paulo Rechi Vita 02db9ff7af asus-wmi: Add quirk_no_rfkill for the Asus U303LB
The Asus U303LB has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion. quirk_no_rfkill prevents asus-wmi
from registering RFKill switches at all for this laptop and allows
asus-wireless to drive the LED through the ASHS ACPI device.

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: Mousou Yuu <guogaishiwo@gmail.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-07-01 16:01:41 -07:00
João Paulo Rechi Vita 2d735244b7 asus-wmi: Add quirk_no_rfkill for the Asus N552VW
The Asus N552VW has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion. quirk_no_rfkill prevents asus-wmi
from registering RFKill switches at all for this laptop and allows
asus-wireless to drive the LED through the ASHS ACPI device.

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-07-01 16:01:41 -07:00
João Paulo Rechi Vita a977e59c0c asus-wmi: Create quirk for airplane_mode LED
Some Asus laptops that have an airplane-mode indicator LED, also have
the WMI WLAN user bit set, and the following bits in their DSDT:

Scope (_SB)
{
  (...)
  Device (ATKD)
  {
    (...)
    Method (WMNB, 3, Serialized)
    {
      (...)
      If (LEqual (IIA0, 0x00010002))
      {
        OWGD (IIA1)
        Return (One)
      }
    }
  }
}

So when asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store the
wlan state, it drives the airplane-mode indicator LED (through the call
to OWGD) in an inverted fashion: the LED is ON when airplane mode is OFF
(since wlan is ON), and vice-versa.

This commit creates a quirk to not register a RFKill switch at all for
these laptops, to allow the asus-wireless driver to drive the airplane
mode LED correctly through the ASHS ACPI device. It also adds a match to
that quirk for the Asus X555UB, which is affected by this problem.

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-07-01 16:01:40 -07:00
João Paulo Rechi Vita 2c1a49c961 asus-wireless: Toggle airplane mode LED
In the ASHS device we have the HSWC method, which calls either OWGD or
OWGS, depending on its parameter:

	Device (ASHS)
	{
		Name (_HID, "ATK4002")  // _HID: Hardware ID
		Method (HSWC, 1, Serialized)
		{
			If ((Arg0 < 0x02))
			{
				OWGD (Arg0)
				Return (One)
			}
			If ((Arg0 == 0x02))
			{
				Local0 = OWGS ()
				If (Local0)
				{
					Return (0x05)
				}
				Else
				{
					Return (0x04)
				}
			}
			If ((Arg0 == 0x03))
			{
				Return (0xFF)
			}
			If ((Arg0 == 0x04))
			{
				OWGD (Zero)
				Return (One)
			}
			If ((Arg0 == 0x05))
			{
				OWGD (One)
				Return (One)
			}
			If ((Arg0 == 0x80))
			{
				Return (One)
			}
		}
		Method (_STA, 0, NotSerialized)  // _STA: Status
		{
			If ((MSOS () >= OSW8))
			{
				Return (0x0F)
			}
			Else
			{
				Return (Zero)
			}
		}
	}

On the Asus laptops that do not have an airplane mode LED, OWGD has an
empty implementation and OWGS simply returns 0. On the ones that have an
airplane mode LED these methods have the following implementation:

	Method (OWGD, 1, Serialized)
	{
		SGPL (0x0203000F, Arg0)
		SGPL (0x0203000F, Arg0)
	}

	Method (OWGS, 0, Serialized)
	{
		Store (RGPL (0x0203000F), Local0)
		Return (Local0)
	}

Where OWGD(1) sets the airplane mode LED ON, OWGD(0) set it off, and
OWGS() returns its state.

This commit exposes the airplane mode indicator LED to userspace under
the name asus-wireless::airplane, so it can be driven according to
userspace's policy.

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-07-01 16:01:26 -07:00
Yu, Ong Hock 08a245160b intel_telemetry: Remove Monitor MWAIT feature dependency
Telemetry capability does not depend on Monitor MWAIT feature.

Signed-off-by: "Yu, Ong Hock" <ong.hock.yu@intel.com>
Acked-by: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-28 22:21:15 -07:00
Alex Hung 1d6de071cb intel-hid: Remove duplicated acpi_remove_notify_handler
The second call to acpi_remove_notify_handler does not result in panic
or generate error messages, but it is unnecessary and the function
returns with an error. Remove the duplicate call. Correct two improperly
indented lines.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-28 22:18:35 -07:00
Nick Leiten 9ee2748712 asus-wmi: Add ambient light sensor toggle key
Ausu laptops issue key 0x7A when the toggle ALS key is pressed (Fn+A on
Asus U38N). Update the key_entry so userspace can handle the event.

Tested on Asus U38N.

Signed-off-by: Nick Leiten <nickleiten@gmail.com>
Reviewed-By: Corentin Chary <corentin.chary@gmail.com>
[dvhart: cleaned up commit message and comment line length]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-28 22:18:35 -07:00
Matej Groma d6b88f64b0 fujitsu-laptop: Add support for eco LED
There is an indicator LED signaling activated power saving mode
on certain Fujitsu laptop models. This has currently no use on Linux.
Export it to userspace.

Signed-off-by: Matej Groma <matejgroma@gmail.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-28 22:18:34 -07:00
Michał Kępień 1879e69f4c fujitsu-laptop: Support touchpad toggle hotkey on Skylake-based models
Haswell-based Fujitsu laptops (Lifebook E734/E744/E754) have a touchpad
toggle hotkey (Fn+F4) which is handled transparently to the operating
system: while an ACPI notification is sent to FUJ02B1 when Fn+F4 is
pressed, touchpad state is properly toggled without any explicit support
for this operation in fujitsu-laptop.

Skylake-based models (Lifebook E736/E746/E756) also have that hotkey,
but the touchpad is not toggled transparently to the operating system.
When Fn+F4 is pressed, an ACPI notification is sent to FUJ02E3.  A
subsequent call to S000 (FUNC_RFKILL) can be used to determine whether
the touchpad toggle hotkey was pressed so that an input event can be
sent to userspace.

Relevant ACPI code:

    Method (_L21, 0, NotSerialized)
    {
        ...
        If (AHKF)
        {
            Notify (\_SB.FEXT, 0x80)
        }
        ...
    }

    Method (S000, 3, Serialized)
    {
        Name (_T_0, Zero)
        Local0 = Zero
        While (One)
        {
            _T_0 = Arg0
            If (_T_0 == Zero)
            {
                Local0 |= 0x04000000
                Local0 |= 0x02000000
                Local0 |= 0x00020000
                Local0 |= 0x0200
                Local0 |= 0x0100
                Local0 |= 0x20
            }
            ElseIf (_T_0 == One)
            {
                ...
                If (AHKF & 0x08)
                {
                Local0 |= 0x04000000
                AHKF ^= 0x08
                }
                ...
            } ...
            Break
        }
        Return (Local0)
    }

Pressing Fn+F4 raises GPE 0x21 and sets bit 3 in AHKF.  This in turn
results in bit 26 being set in the value returned by FUNC_RFKILL called
with 1 as its first argument.  On Skylake-based models, bit 26 is also
set in the value returned by FUNC_RFKILL called with 0 as its first
argument (this value is saved in fujitsu_hotkey->rfkill_supported upon
module initialization), which suggests that this bit is set on models
which do not handle touchpad toggling transparently to the operating
system.

Note that bit 3 is cleared in AHKF once FUNC_RFKILL is called with 1 as
its first argument, which requires fujitsu-laptop to handle this hotkey
in a different manner than the other, GIRB-based hotkeys: two input
events (press and release) are immediately sent once Fn+F4 is pressed.

Reported-and-tested-by: Jan-Marek Glogowski <glogow@fbihome.de>
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-28 22:18:34 -07:00
Michał Kępień 00816e1b38 fujitsu-laptop: Remove unused macros
FUJLAPTOP_* macros were introduced by 20b9373, but have never been used
except FUJLAPTOP_DEBUG, which was made redundant by the previous patch.

ACPI_VIDEO_NOTIFY_* macros were also introduced by 20b9373, but they
have not been needed since 1696d9d.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-28 22:18:33 -07:00
Michał Kępień 98020a4ab0 fujitsu-laptop: Use module name in debug messages
vdbg_printk() always prefixes the log messages it generates with
"FUJ02B1", which can be misleading, because it might have been called
while handling a notify for ACPI device FUJ02E3 or during module
initialization etc.  Employ pr_fmt() to prefix debug messages with the
module name instead and thus avoid confusion.

Reported-by: Jan-Marek Glogowski <glogow@fbihome.de>
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-28 22:18:33 -07:00
Alex Hung fc8a601e11 hp-wmi: Fix wifi cannot be hard-unblocked
Several users reported wifi cannot be unblocked as discussed in [1].
This patch removes the use of the 2009 flag by BIOS but uses the actual
WMI function calls - it will be skipped if WMI reports unsupported.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=69131

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Tested-by: Evgenii Shatokhin <eugene.shatokhin@yandex.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-28 22:18:32 -07:00
Azael Avalos 95d16d816a toshiba_acpi: Bump driver version and update copyright year
After several fixes, and added support for more features (WWAN,
Cooling Method and IIO accelometer axis data), bump the driver
version to 0.24.

Also update the copyright year.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-28 22:18:32 -07:00
Azael Avalos 2fd6788445 toshiba_acpi: Remove the position sysfs entry
Now that we have proper support for the acceleromeer under the IIO
subsystem, the _position_ sysfs file is now deprecated.

This patch removes all code related to the position sysfs entry.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-28 22:18:31 -07:00
Azael Avalos 98010f1ea0 toshiba_acpi: Add IIO interface for accelerometer axis data
This patch adds the accelerometer axis data to the IIO subsystem.

Currently reporting the X, Y and Z values, as no other data can be
queried given the fact that the accelerometer chip itself is hidden
behind the Toshiba proprietary interface.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-28 22:17:51 -07:00
Ingo Molnar 8114e90ea4 Linux 4.7-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXcHi9AAoJEHm+PkMAQRiGSJ0H/2o4t9VWYmhyPC1sdIHoCExJ
 P4tBrcZYBmKcsOmIfnJDa5g/+IdhouEUM0v0fHPogS2UUWT9eRuJWYD3sY+HpEQ+
 heKTli8X73gsFB25odeIbIt0jAoSiiMYWDrWqLNsuUV1tjEYVA8rH0SM94FiOC/5
 7WVWXLTuH+Rm7JHP18BnKxmMMbzrTFmwisLMqFKyfZRRSlS+/ix7iLUNO9AFa39B
 YHxNPihLrZ0oONyCOAQoHTIXXrw0cQbxV2utg3vnMcCZdme2xOn+iXMntTSKfZ39
 iC9/T0vsO3R6OrRo2aDZAnCPUAniXnMEIhrKG37WMyXpj6cucZ/2QiNXcXviGV4=
 =iLte
 -----END PGP SIGNATURE-----

Merge tag 'v4.7-rc5' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-27 11:20:46 +02:00
Alex Hung ab9bb11ccb dell-wmi: Add a WMI event code for display on/off
Some new Dell AIO systems have a button that generates a WMI event to
turn the LCD on/off.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-21 09:24:01 -07:00
Pali Rohár e075b3c898 dell-wmi: Generate one sparse keymap for all machines
This patch reworks code for generating sparse keymap and processing WMI
events. It unifies procedure for generating sparse keymap and also unifies
big switch code for processing WMI events of different types. After this
patch dell-wmi driver does not differ between "old" and "new" hotkey type.

It constructs sparse keymap table with all WMI codes. It is because on some
laptops (e.g. Dell Latitude E6440) ACPI/firmware send both event types (old
and new).

Each WMI code in sparse keymap table is prefixed by 16bit event type, so it
does not change functionality on laptops with "old" hotkey support (those
without scancodes in DMI).

This allow us to distinguish between same WMI codes with different types in
sparse keymap. Thanks to this WMI events of type 0x0011 were moved from big
switch into sparse keymap table too.

This patch also fixes possible bug in parsing WMI event buffer introduced
in commit 5ea2559726 ("dell-wmi: Add support for new Dell systems"). That
commit changed buffer type from int* to u16* without fixing code. More at:
http://lkml.iu.edu/hypermail/linux/kernel/1507.0/01950.html

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-17 11:13:35 -07:00
Pali Rohár 3237a86104 dell-wmi: Add information about other WMI event codes
ACPI DSDT tables have defined other WMI codes, but does not contain any
description when those codes are emitted. Some other codes can be found in
logs on internet. In this patch are all which I saw, but lot of them are
not tested properly (e.g. for duplicate events with AT keyboard). Now we
have all WMI event codes at one place and in future after proper testing
those codes can be correctly enabled or disabled...

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-17 11:13:29 -07:00
Pali Rohár 6a4d260a63 dell-wmi: Sort WMI event codes and update comments
For better readability of keymap table, sort events by codes and also
update comments for events to be more informative.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-17 11:12:44 -07:00
Pali Rohár 3de59bcd3b dell-wmi: Ignore WMI event code 0xe045
>From Dell we know that WMI event code 0xe045 is for Num Lock key, but it is
unclear due to message in commit 0b3f6109f0 ("dell-wmi: new driver for
hotkey control").

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reviewed-by: Michał Kępień <kernel@kempniu.pl>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Link: https://lkml.org/lkml/2015/7/7/830
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-17 11:12:25 -07:00
Jean Delvare 25789f95a8 platform/x86: Drop duplicate dependencies on X86
The whole menu depends on X86 so there is no point in repeating this
dependency on individual driver entries.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-08 13:21:37 -07:00
Dennis Wassenberg 0118c2d3ea thinkpad_acpi: Add support for HKEY version 0x200
Lenovo Thinkpad devices T460, T460s, T460p, T560, X260 use
HKEY version 0x200 without adaptive keyboard.

HKEY version 0x200 has method MHKA with one parameter value.
Passing parameter value 1 will get hotkey_all_mask (the same like
HKEY version 0x100 without parameter). Passing parameter value 2 to
MHKA method will retrieve hotkey_all_adaptive_mask. If 0 is returned in
that case there is no adaptive keyboard available.

Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Tested-by: Lyude <cpaul@redhat.com>
Tested-by: Marco Trevisan <marco@ubuntu.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
[dvhart: Keep MHKA error string on one line in new and existing pr_err calls]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-08 13:01:56 -07:00
Alex Hung 48f67d6219 ideapad_laptop: Add an event for mic mute hotkey
Newer ideapads support a new mic hotkey implemented via an ACPI
interface. This patch converts the mic mute event to a keycode
KEY_MICMUTE.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Acked-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-06-08 13:01:34 -07:00
Dave Hansen 678dec00a4 x86/intel_telemetry: Use Intel family name macros for telemetry driver
Another straightforward replacement of magic numbers.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Darren Hart <dvhart@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jacob.jun.pan@intel.com
Cc: platform-driver-x86@vger.kernel.org
Link: http://lkml.kernel.org/r/20160603001947.05102C3E@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08 13:03:26 +02:00
Dave Hansen 70e0d117f2 x86/pmc_core: Use Intel family name macros for pmc_core driver
Another straightforward replacement of magic numbers.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Darren Hart <dvhart@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishwanath Somayaji <vishwanath.somayaji@intel.com>
Cc: jacob.jun.pan@intel.com
Cc: platform-driver-x86@vger.kernel.org
Link: http://lkml.kernel.org/r/20160603001949.7D5B9534@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08 13:02:52 +02:00
Linus Torvalds 1e8143db75 platform-drivers-x86 for 4.7-1
Mostly minor updates and cleanups. One new power management controller driver
 for Intel Core SoCs.
 
 platform/x86:
  - Add PMC Driver for Intel Core SoC
 
 dell-rbtn:
  - Ignore ACPI notifications if device is suspended
 
 thinkpad_acpi:
  - save kbdlight state on suspend and restore it on resume
 
 intel_menlow:
  - reduce code duplication
 
 asus-wmi:
  - provide access to ALS control
 
 ideapad-laptop:
  - add a new WMI string for ESC key
 
 surfacepro3_button:
  - Add a warning when switching to tablet mode
 
 sony-laptop:
  - Avoid oops on module unload for older laptops
 
 intel_telemetry:
  - Constify telemetry_core_ops structures
 
 fujitsu-laptop:
  - Use IS_ENABLED() instead of checking for built-in or module
 
 asus-laptop:
  - correct error handling in sysfs_acpi_set
  - remove redundant initializers
  - correct error handling in asus_read_brightness()
 
 fujitsu-laptop:
  - Support radio LED
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXSJh4AAoJEKbMaAwKp3647kkIAIRi8inUCfPQsvpi7iEfaAW7
 vaLvIOFfRxu+WHzYOrhrAg17yscA18xTRtp32dhjHF3w6zJsbsZ9nEqCcRliQG2+
 /i6EdC1ZnboyWWW82HbFGK8r5PMpPJa2p7wPhrEuPcM3aak+bWfCD96HdjFsoxfT
 Vda/2L9grvQwcUczRARh4k6sHQTsdV+tU5MF5Kefso1l31qMyO8A3PNgCPFWtCht
 St0hlRs4SnZS97Bw7IIbP93AiLBejT1jtRHddvpEnj7GaPaBMpBSUqN3KgZRVnfL
 Bln3iPkq+1TVprcizt60X++czfOAWmce1jF9D4oVS5FGW0yIoog0aik2H1rrY64=
 =m/0/
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.7-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
 "Mostly minor updates and cleanups.  One new power management
  controller driver for Intel Core SoCs.

  platform/x86:
   - Add PMC Driver for Intel Core SoC

  dell-rbtn:
   - Ignore ACPI notifications if device is suspended

  thinkpad_acpi:
   - save kbdlight state on suspend and restore it on resume

  intel_menlow:
   - reduce code duplication

  asus-wmi:
   - provide access to ALS control

  ideapad-laptop:
   - add a new WMI string for ESC key

  surfacepro3_button:
   - Add a warning when switching to tablet mode

  sony-laptop:
   - Avoid oops on module unload for older laptops

  intel_telemetry:
   - Constify telemetry_core_ops structures

  fujitsu-laptop:
   - Use IS_ENABLED() instead of checking for built-in or module

  asus-laptop:
   - correct error handling in sysfs_acpi_set
   - remove redundant initializers
   - correct error handling in asus_read_brightness()

  fujitsu-laptop:
   - Support radio LED"

* tag 'platform-drivers-x86-v4.7-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  platform/x86: Add PMC Driver for Intel Core SoC
  dell-rbtn: Ignore ACPI notifications if device is suspended
  thinkpad_acpi: save kbdlight state on suspend and restore it on resume
  intel_menlow: reduce code duplication
  asus-wmi: provide access to ALS control
  ideapad-laptop: add a new WMI string for ESC key
  surfacepro3_button: Add a warning when switching to tablet mode
  sony-laptop: Avoid oops on module unload for older laptops
  intel_telemetry: Constify telemetry_core_ops structures
  fujitsu-laptop: Use IS_ENABLED() instead of checking for built-in or module
  asus-laptop: correct error handling in sysfs_acpi_set
  asus-laptop: remove redundant initializers
  asus-laptop: correct error handling in asus_read_brightness()
  fujitsu-laptop: Support radio LED
2016-05-27 13:56:02 -07:00
Rajneesh Bhardwaj b740d2e923 platform/x86: Add PMC Driver for Intel Core SoC
This patch adds the Power Management Controller driver as a PCI driver
for Intel Core SoC architecture.

This driver can utilize debugging capabilities and supported features
as exposed by the Power Management Controller.

Please refer to the below specification for more details on PMC features.
http://www.intel.in/content/www/in/en/chipsets/100-series-chipset-datasheet-vol-2.html

The current version of this driver exposes SLP_S0_RESIDENCY counter.
This counter can be used for detecting fragile SLP_S0 signal related
failures and take corrective actions when PCH SLP_S0 signal is not
asserted after kernel freeze as part of suspend to idle flow
(echo freeze > /sys/power/state).

Intel Platform Controller Hub (PCH) asserts SLP_S0 signal when it
detects favorable conditions to enter its low power mode. As a
pre-requisite the SoC should be in deepest possible Package C-State
and devices should be in low power mode. For example, on Skylake SoC
the deepest Package C-State is Package C10 or PC10. Suspend to idle
flow generally leads to PC10 state but PC10 state may not be sufficient
for realizing the platform wide power potential which SLP_S0 signal
assertion can provide.

SLP_S0 signal is often connected to the Embedded Controller (EC) and the
Power Management IC (PMIC) for other platform power management related
optimizations.

In general, SLP_S0 assertion == PC10 + PCH low power mode + ModPhy Lanes
power gated + PLL Idle.

As part of this driver, a mechanism to read the SLP_S0_RESIDENCY is exposed
as an API and also debugfs features are added to indicate SLP_S0 signal
assertion residency in microseconds.

echo freeze > /sys/power/state
wake the system
cat /sys/kernel/debug/pmc_core/slp_s0_residency_usec

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Vishwanath Somayaji <vishwanath.somayaji@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-05-27 11:47:56 -07:00
Gabriele Mazzotta ff8651237f dell-rbtn: Ignore ACPI notifications if device is suspended
Some BIOSes unconditionally send an ACPI notification to RBTN when the
system is resuming from suspend. This makes dell-rbtn send an input
event to userspace as if a function key was pressed. Prevent this by
ignoring all the notifications received while the device is suspended.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=106031
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Tested-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-05-27 11:47:56 -07:00
Marco Trevisan (Treviño) afcedebc6a thinkpad_acpi: save kbdlight state on suspend and restore it on resume
Override default LED class suspend/resume handles, by keeping track of
the brightness level before suspending so that it can be automatically
restored on resume by calling default resume handler.

Signed-off-by: Marco Trevisan (Treviño) <mail@3v1n0.net>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-05-27 11:47:55 -07:00
Rasmus Villemoes a29ccf6ff3 intel_menlow: reduce code duplication
aux0_show and aux1_show consists of almost identical code. Pull that
into a common helper and make them thin wrappers. Similarly for
_store.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-05-27 11:47:55 -07:00
Oleksij Rempel aca234f637 asus-wmi: provide access to ALS control
Asus Zenbook ux31a is providing ACPI0008 interface for ALS
(Ambient Light Sensor), which is accessible for OS => Win 7.
This sensor can be used with iio/acpi-als driver.
Since it is disabled by default, we should use asus-wmi
interface to enable it.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-05-27 11:47:54 -07:00
Arnd Bergmann 2d98e0b942 ideapad-laptop: add a new WMI string for ESC key
My patch to the ideapad-laptop driver to get the ESC key working on the
Yoga 1170 (Yoga 3) failed to do the same for the following model, the
Lenovo Yoga 700.

Denis Gordienko managed to get it working by adding another GUID for the
new WMI interface. I have adapted his patch to normal coding style
and simplified it a bit for inclusion, but this patch is currently
untested.

Link: https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/YOGA-3-14-How-to-reclaim-my-Esc-key-and-permanently-disable/m-p/3317499
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Denis Gordienko <denis.gordienko.mail@gmail.com>
[dvhart: Whitespace cleanup, static const char *const array declaration]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-05-27 11:47:54 -07:00
Andy Shevchenko e27ffe7e41 surfacepro3_button: Add a warning when switching to tablet mode
Microsoft Surface Book has a tablet mode button. Print another message
once on this event instead of repeating "Unknown event...".

Unfortunately, proper support involves the _DSM method, which is not a
discoverable interface. Just print a warning for now.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-05-27 11:47:53 -07:00
Andy Shevchenko 538d7eb86d drivers/platform/x86/wmi.c: use generic UUID library
Instead of opencoding let's use generic UUID library functions here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:58:30 -07:00
Linus Torvalds 1eccc6e152 This is the bulk of GPIO changes for kernel cycle v4.7:
Core infrastructural changes:
 
 - Support for natively single-ended GPIO driver stages. This
   means that if the hardware has registers to configure open
   drain or open source configuration, we use that rather than
   (as we did before) try to emulate it by switching the line
   to an input to get high impedance. This is also documented
   throughly in Documentation/gpio/driver.txt for those of you
   who did not understand one word of what I just wrote.
 
 - Start to do away with the unnecessarily complex and
   unitelligible ARCH_REQUIRE_GPIOLIB and
   ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from
   the time when the GPIO subsystem was unmaintained. Archs can
   now just select GPIOLIB and be done with it, cleanups to
   arches will trickle in for the next kernel. Some minor archs
   ACKed the changes immediately so these are included in this
   pull request.
 
 - Advancing the use of the data pointer inside the GPIO device
   for storing driver data by switching the PowerPC, Super-H
   Unicore and a few other subarches or subsystem drivers in
   ALSA SoC, Input, serial, SSB, staging etc to use it.
 
 - The initialization now reads the input/output state of the
   GPIO lines, so that each GPIO descriptor knows - if this
   callback is implemented - whether the line is input or
   output. This also reflects nicely in userspace "lsgpio".
 
 - It is now possible to name GPIO producer names, line names,
   from the device tree. (Platform data has been supported for
   a while.) I bet we will get a similar mechanism for ACPI
   one of those days. This makes is possible to get sensible
   producer names for e.g. GPIO rails in "lsgpio" in userspace.
 
 New drivers:
 
 - New driver for the Loongson1.
 
 - The XLP driver now supports Broadcom Vulcan ARM64.
 
 - The IT87 driver now supports IT8620 and IT8628.
 
 - The PCA953X driver now supports Galileo Gen2.
 
 Driver improvements:
 
 - MCP23S08 was switched to use the gpiolib irqchip helpers and
   now also suppors level-triggered interrupts.
 
 - 74x164 and RCAR now supports the .set_multiple() callback
 
 - AMDPT was converted to use generic GPIO.
 
 - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
   support the new single ended callback for open drain
   and in some cases open source.
 
 - Implement the .get_direction() callback for a few more drivers
   like PL061, Xgene.
 
 Cleanups:
 
 - Paul Gortmaker combed through the drivers and de-modularized
   those who are not really modules.
 
 - Move the GPIO poweroff DT bindings to the power subdir where
   they belong.
 
 - Rename gpio-generic.c to gpio-mmio.c, which is much more to the
   point. That's what it is handling, nothing more, nothing less.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXOuJ5AAoJEEEQszewGV1zNXsQAII5wtkP69WRJ3goYBKg1dZN
 DkuLqZyVI4hCgRhptzUW10gDLHKKOCVubfetTJHSpyG/dWDJXPCyH6FHF+pW6lMX
 y+em8kAvWctKpaosy4EM7O55/IohW0/fNCTOfzfrUNivjydFuA2XwPUiPqC7111O
 DeKlC/t+W1JEvZTiKMi83pKq+9wqhiHmD0qxRHhV57S+MT8e7mdlSKOp7uUkKPkg
 LPlerXosnmeFjL2emuSnKl/tq8pOyruU6uaIGG/uwpbo2W86Dok9GY2GWkQ4pANT
 pDtprc4aJ/Clf6Q0CoKwQbmAozqTDeJo+Und9tRs2KuZRly2bWOcyVE0lyK+Y4s0
 544LcKw2q6cB9ARZ6JExEVRJejPISGKMqo9TaHkyNSIJoiiatKYvNS4WVeFtTgbI
 W+1WfM1svPymNRqVPO1PMLV+3m9dalDH2WjtaFF21uCAQ/G0AuPEHjEDbbx0HIpb
 qrvWmYzZ97Rm/LdYROFRO53nEdCp2jh6c3n4/2kGYM8H0suvGxXZsB1g4i+Dm+B+
 qKVTS282azlDuH9ohXeXizeb6atK6s8TC3Rmew97SmXDO00cUQzEQO/ZquRLHY9r
 n83afQ4OL2Z9yruAxAk7pCshVSyheOsHuFPuZ7bwPW31VMdoWNRkhnaTUXMjGfYg
 3y39IHrCKWNMCCVM1iNl
 =z4d6
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for kernel cycle v4.7:

  Core infrastructural changes:

   - Support for natively single-ended GPIO driver stages.

     This means that if the hardware has registers to configure open
     drain or open source configuration, we use that rather than (as we
     did before) try to emulate it by switching the line to an input to
     get high impedance.

     This is also documented throughly in Documentation/gpio/driver.txt
     for those of you who did not understand one word of what I just
     wrote.

   - Start to do away with the unnecessarily complex and unitelligible
     ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another
     evolutional artifact from the time when the GPIO subsystem was
     unmaintained.

     Archs can now just select GPIOLIB and be done with it, cleanups to
     arches will trickle in for the next kernel.  Some minor archs ACKed
     the changes immediately so these are included in this pull request.

   - Advancing the use of the data pointer inside the GPIO device for
     storing driver data by switching the PowerPC, Super-H Unicore and
     a few other subarches or subsystem drivers in ALSA SoC, Input,
     serial, SSB, staging etc to use it.

   - The initialization now reads the input/output state of the GPIO
     lines, so that each GPIO descriptor knows - if this callback is
     implemented - whether the line is input or output.  This also
     reflects nicely in userspace "lsgpio".

   - It is now possible to name GPIO producer names, line names, from
     the device tree.  (Platform data has been supported for a while).
     I bet we will get a similar mechanism for ACPI one of those days.
     This makes is possible to get sensible producer names for e.g.
     GPIO rails in "lsgpio" in userspace.

  New drivers:

   - New driver for the Loongson1.

   - The XLP driver now supports Broadcom Vulcan ARM64.

   - The IT87 driver now supports IT8620 and IT8628.

   - The PCA953X driver now supports Galileo Gen2.

  Driver improvements:

   - MCP23S08 was switched to use the gpiolib irqchip helpers and now
     also suppors level-triggered interrupts.

   - 74x164 and RCAR now supports the .set_multiple() callback

   - AMDPT was converted to use generic GPIO.

   - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
     support the new single ended callback for open drain and in some
     cases open source.

   - Implement the .get_direction() callback for a few more drivers like
     PL061, Xgene.

  Cleanups:

   - Paul Gortmaker combed through the drivers and de-modularized those
     who are not really modules.

   - Move the GPIO poweroff DT bindings to the power subdir where they
     belong.

   - Rename gpio-generic.c to gpio-mmio.c, which is much more to the
     point.  That's what it is handling, nothing more, nothing less"

* tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits)
  MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
  gpio: zevio: make it explicitly non-modular
  gpio: timberdale: make it explicitly non-modular
  gpio: stmpe: make it explicitly non-modular
  gpio: sodaville: make it explicitly non-modular
  pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error
  gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms
  gpio: dt-bindings: add wd,mbl-gpio bindings
  gpio: of: make it possible to name GPIO lines
  gpio: make gpiod_to_irq() return negative for NO_IRQ
  gpio: xgene: implement .get_direction()
  gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver
  gpio: tegra: Implement gpio_get_direction callback
  gpio: set up initial state from .get_direction()
  gpio: rename gpio-generic.c into gpio-mmio.c
  gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case
  gpio: dwapb: add gpio-signaled acpi event support
  gpio: dwapb: convert device node to fwnode
  gpio: dwapb: remove name from dwapb_port_property
  gpio/qoriq: select IRQ_DOMAIN
  ...
2016-05-17 17:39:42 -07:00
Rafael J. Wysocki fc72395780 Merge branches 'acpi-pci', 'acpi-misc' and 'acpi-tools'
* acpi-pci:
  ACPI,PCI,IRQ: remove SCI penalize function
  ACPI,PCI,IRQ: remove redundant code in acpi_irq_penalty_init()
  ACPI,PCI,IRQ: reduce static IRQ array size to 16
  ACPI,PCI,IRQ: reduce resource requirements

* acpi-misc:
  ACPI / sysfs: fix error code in get_status()
  ACPI / device_sysfs: Clean up checkpatch errors
  ACPI / device_sysfs: Change _SUN and _STA show functions error return to EIO
  ACPI / device_sysfs: Add sysfs support for _HRV hardware revision
  arm64: defconfig: Enable ACPI
  ACPI / ARM64: Remove EXPERT dependency for ACPI on ARM64
  ACPI / ARM64: Don't enable ACPI by default on ARM64
  acer-wmi: Use acpi_dev_found()
  eeepc-wmi: Use acpi_dev_found()
  ACPI / utils: Rename acpi_dev_present()

* acpi-tools:
  tools/power/acpi: close file only if it is open
2016-05-16 16:45:48 +02:00
Lawrence Yiu ddd9357f60 sony-laptop: Avoid oops on module unload for older laptops
Older VAIO laptops without the SN00 ACPI method will have the "handles"
variable unset. Return early from sony_nc_function_cleanup when "handles"
is null.

Signed-off-by: Lawrence Yiu <lawyiu.dev@gmail.com>
Acked-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-05-05 16:32:32 -07:00
Julia Lawall 775d054aba intel_telemetry: Constify telemetry_core_ops structures
The telemetry_core_ops structures are never modified, so declare them as
const.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-05-05 13:58:55 -07:00
Javier Martinez Canillas 575b245d90 fujitsu-laptop: Use IS_ENABLED() instead of checking for built-in or module
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-05-05 13:52:18 -07:00
Linus Walleij 3769a895b4 platform: x86: intel-pmic: use gpiochip data pointer
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-26 15:34:41 +02:00
Giedrius Statkevičius 19d46ee1ae asus-laptop: correct error handling in sysfs_acpi_set
Properly return rv back to the caller in the case of an error in
parse_arg. In the process remove a unused variable 'out'.

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-04-25 10:42:54 -07:00
Giedrius Statkevičius 2ce6d9932d asus-laptop: remove redundant initializers
Initializing rv to AE_OK is pointless because later function results are
assigned to them and only then the variable is used

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-04-25 10:42:40 -07:00
Giedrius Statkevičius 198b618ab1 asus-laptop: correct error handling in asus_read_brightness()
It is possible that acpi_evaluate_integer might fail and value would not be
set to any value so correct this defect by returning 0 in case of an
error. This is also the correct thing to return because the backlight
subsystem will print the old value of brightness in this case.

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-04-25 10:39:58 -07:00
Azael Avalos a30b8f81d9 toshiba_acpi: Fix regression caused by hotkey enabling value
Commit 52cbae0127 ("toshiba_acpi: Change default Hotkey enabling value")
changed the hotkeys enabling value, as it was the same value Windows uses,
however, it turns out that the value tells the EC that the driver will now
take care of the hardware events like the physical RFKill switch or the
pointing device toggle button.

This patch reverts such commit by changing the default hotkey enabling
value to 0x09, which enables hotkey events only, making the hardware
buttons working again.

Fixes bugs 113331 and 114941.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-04-25 10:31:59 -07:00
Aubrey Li 5d07163334 platform:x86 decouple telemetry driver from the optional IPC resources
Currently the optional IPC resources prevent telemetry driver from
probing if these resources are not in ACPI table. This patch decouples
telemetry driver from these optional resources, so that telemetry driver
has dependency only on the necessary ACPI resources.

Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-04-19 13:51:41 -07:00
Dan Carpenter a7718360d9 thinkpad_acpi: Silence an uninitialized variable warning
If fan_get_status() fails then "s" is not initialized.  Tweak the error
handling a bit to silence this warning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-04-15 08:27:15 -07:00
Dan Carpenter d0192dca2d intel_telemetry_pltdrv: Silence an uninitialized variable warning
Presumably "pss_period" and "ioss_period" can't both be zero, but this
function is never called so we can't infer that using static analysis
alone.

Silence the warning by setting "ret" to zero.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-04-15 08:26:41 -07:00
Dan Carpenter ff22b4806d hp_accel: Silence an uninitialized variable warning
If acpi_evaluate_integer() fails then "lret" isn't initialized.  I've
tweaked the error handling to avoid this issue.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-04-15 08:26:25 -07:00
Michał Kępień 4f62568c1f fujitsu-laptop: Support radio LED
Lifebook E734/E744/E754 has a LED which the manual calls "radio
components indicator".  It should be lit when any radio transmitter is
enabled.  Its state can be read and set using ACPI (FUNC interface,
RFKILL method).

Since the Lifebook E734/E744/E754 only has a button (as compared to a
slider) for enabling/disabling radio transmitters, I believe the LED in
question is meant to indicate whether all radio transmitters are
currently on or off.  However, pressing the radio toggle button does not
automatically change the hardware state of the transmitters: it looks
like this machine relies on soft rfkill.

As for detecting whether the LED is present on a given machine, I had to
resort to educated guesswork.  I assumed this LED is present on all
devices which have a radio toggle button instead of a slider.  My
Lifebook E744 holds 0x01010001 in BTNI.  By comparing the bits and
buttons with those of a Lifebook E8420 (BTNI=0x000F0101, has a slider),
I put my money on bit 24 as the indicator of the radio toggle button
being present.  Furthermore, bit 24 is also clear on the S7020 which
does not have the toggle button or an RF LED.

Figuring out how the LED is controlled was more deterministic as all it
took was decompiling the DSDT and taking a look at method S000 (the
RFKILL method of the FUNC interface).

The LED control method implemented here is unsuitable for use with
"heavy" LED triggers, like phy0rx.  Once blinking frequency achieves a
certain level, the system hangs.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
[jwoithe: Comment on bit 24 in BTNI, expanded commit msg]
Signed-off-by: Jonathan Woithe <jwoithe@just42.net>
[dvhart: Minor style and commit log adjustments]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-04-15 00:31:09 -07:00
Martin Vajnar 330a106508 hp_accel: Add support for HP ProBook 440 G3
HP ProBook 440 G3 laptop needs a non-standard mapping (x_inverted_usd).

Signed-off-by: Martin Vajnar <martin.vajnar@gmail.com>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-04-14 20:32:13 -07:00
Lukas Wunner 8c92a75e50 acer-wmi: Use acpi_dev_found()
Use shiny new acpi_dev_found() and remove all the boilerplate
to search for a particular ACPI device. No functional change.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-09 03:12:59 +02:00
Lukas Wunner 9f9de69d75 eeepc-wmi: Use acpi_dev_found()
Use shiny new acpi_dev_found() and remove all the boilerplate
to search for a particular ACPI device. No functional change.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-09 03:12:58 +02:00
Alex Hung 45aa56cd0f intel-hid: add a workaround to ignore an event after waking up from S4.
This is the same as the original workaround from S3 but for S4.  Without
this workaround, a rfkill event will be received and it will toggle
wireless devices when radio hotkey is not pressed.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-28 10:00:47 -07:00
Linus Torvalds 5a010c73cd platform-drivers-x86 for 4.6-1
Significant refactoring of Dell laptop drivers, modularizing the smbios code.
 Multiple new platforms added for ideapad, asus, dell, and alienware using
 existing quirks. A few fixes and cleanups.
 
 hp-wmi:
  - Remove GPS rfkill support via pre-2009 interface
  - fix unregister order in hp_wmi_rfkill_setup() once again
 
 ideapad-laptop:
  - Add ideapad Y700 (15) to the no_hw_rfkill DMI list
 
 fujitsu-laptop:
  - Support radio toggle button
 
 intel-hid:
  - allocate correct amount of memory for private struct
 
 platform/x86:
  - Make intel_scu_ipc explicitly non-modular
 
 intel_pmc_ipc:
  - Avoid pending IPC1 command during legacy suspend
  - Fix GCR register base address and length
 
 asus-nb-wmi:
  - add wapf=4 quirk for ASUS X75VD
 
 intel_telemetry_pltdrv:
  - Change verbosity control bits
 
 dell-rbtn:
  - Add a comment about the XPS 13 9350
 
 dell-wmi, dell-laptop:
  - depends DMI
 
 dell-wmi:
  - support Dell Inspiron M5110
  - properly process Dell Instant Launch hotkey
  - enable receiving WMI events on Dell Vostro V131
  - Support new hotkeys on the XPS 13 9350 (Skylake)
  - Clean up hotkey table size check
  - Stop storing pointers to DMI tables
 
 dell-laptop:
  - move dell_smi_error() to dell-smbios
  - use dell_smbios_find_token() instead of find_token_location()
  - use dell_smbios_find_token() instead of find_token_id()
  - extract SMBIOS-related code to a separate module
 
 dell-smbios:
  - rename dell_smi_error() to dell_smbios_error()
  - make da_tokens static
  - remove find_token_{id,location}()
  - implement new function for finding DMI table 0xDA tokens
  - make the SMBIOS buffer static
  - return the SMBIOS buffer from dell_smbios_get_buffer()
  - don't return an SMBIOS buffer from dell_smbios_send_request()
  - don't pass an SMBIOS buffer to dell_smbios_send_request()
  - rename dell_send_request() to dell_smbios_send_request()
  - rename release_buffer() to dell_smbios_release_buffer()
  - rename clear_buffer() to dell_smbios_clear_buffer()
  - rename get_buffer() to dell_smbios_get_buffer()
 
 dell-led:
  - use dell_smbios_send_request() for performing SMBIOS calls
  - use dell_smbios_find_token() for finding mic DMI tokens
 
 toshiba_acpi:
  - Add a module parameter to disable hotkeys registration
  - Add sysfs entries for the Cooling Method feature
  - Add support for cooling method feature
 
 Documentation/ABI:
  - Update sysfs-driver-toshiba_acpi file
 
 thinkpad_acpi:
  - Remove ambiguous logging for "Unsupported brightness interface"
 
 alienware-wmi:
  - whitespace improvements
  - Add support for two new systems: ASM200 and ASM201.
  - Add support for deep sleep control.
  - Add initial support for alienware graphics amplifier.
  - Add support for new platform: X51-R3
  - Clean up whitespace for ASM100 platform
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJW8s77AAoJEKbMaAwKp364iVgH/18Tpefbc7uOrNak4zfTmvVO
 CQjLdbnbCYoeNjwgdYSZNlaR+E2TuMdqmBXXLEr3kqicpmX15l+V5y8xJkDmGpxw
 0RmwJnkdIpmkZcjb3/2abOtIuOj1Y/tXCp5mY1FoaDYBQVzO+ZsPEGNQcMu5uJpa
 qZTw9UwiSPUspTrHHbS7/Bzv7yFnxlWC1nmt6G5zL4OMEv2AGbuVSstXVGySIML5
 TfFdisUBIXQplzwpDytHGqtGUJMc0NnT1s66beuo1oBdEFTFtBNpFySW3goV2nrZ
 JPbvyaV3tD24NYNmU9WH653InX4KuaGiJRWVT31a/I5HVVlx7mZdUYRI+EYAnmE=
 =e0E4
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.6-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
 "Significant refactoring of Dell laptop drivers, modularizing the
  smbios code.  Multiple new platforms added for ideapad, asus, dell,
  and alienware using existing quirks.  A few fixes and cleanups.

  hp-wmi:
   - Remove GPS rfkill support via pre-2009 interface
   - fix unregister order in hp_wmi_rfkill_setup() once again

  ideapad-laptop:
   - Add ideapad Y700 (15) to the no_hw_rfkill DMI list

  fujitsu-laptop:
   - Support radio toggle button

  intel-hid:
   - allocate correct amount of memory for private struct

  platform/x86:
   - Make intel_scu_ipc explicitly non-modular

  intel_pmc_ipc:
   - Avoid pending IPC1 command during legacy suspend
   - Fix GCR register base address and length

  asus-nb-wmi:
   - add wapf=4 quirk for ASUS X75VD

  intel_telemetry_pltdrv:
   - Change verbosity control bits

  dell-rbtn:
   - Add a comment about the XPS 13 9350

  dell-wmi, dell-laptop:
   - depends DMI

  dell-wmi:
   - support Dell Inspiron M5110
   - properly process Dell Instant Launch hotkey
   - enable receiving WMI events on Dell Vostro V131
   - Support new hotkeys on the XPS 13 9350 (Skylake)
   - Clean up hotkey table size check
   - Stop storing pointers to DMI tables

  dell-laptop:
   - move dell_smi_error() to dell-smbios
   - use dell_smbios_find_token() instead of find_token_location()
   - use dell_smbios_find_token() instead of find_token_id()
   - extract SMBIOS-related code to a separate module

  dell-smbios:
   - rename dell_smi_error() to dell_smbios_error()
   - make da_tokens static
   - remove find_token_{id,location}()
   - implement new function for finding DMI table 0xDA tokens
   - make the SMBIOS buffer static
   - return the SMBIOS buffer from dell_smbios_get_buffer()
   - don't return an SMBIOS buffer from dell_smbios_send_request()
   - don't pass an SMBIOS buffer to dell_smbios_send_request()
   - rename dell_send_request() to dell_smbios_send_request()
   - rename release_buffer() to dell_smbios_release_buffer()
   - rename clear_buffer() to dell_smbios_clear_buffer()
   - rename get_buffer() to dell_smbios_get_buffer()

  dell-led:
   - use dell_smbios_send_request() for performing SMBIOS calls
   - use dell_smbios_find_token() for finding mic DMI tokens

  toshiba_acpi:
   - Add a module parameter to disable hotkeys registration
   - Add sysfs entries for the Cooling Method feature
   - Add support for cooling method feature

  Documentation/ABI:
   - Update sysfs-driver-toshiba_acpi file

  thinkpad_acpi:
   - Remove ambiguous logging for "Unsupported brightness interface"

  alienware-wmi:
   - whitespace improvements
   - Add support for two new systems: ASM200 and ASM201.
   - Add support for deep sleep control.
   - Add initial support for alienware graphics amplifier.
   - Add support for new platform: X51-R3
   - Clean up whitespace for ASM100 platform"

* tag 'platform-drivers-x86-v4.6-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (47 commits)
  hp-wmi: Remove GPS rfkill support via pre-2009 interface
  hp-wmi: fix unregister order in hp_wmi_rfkill_setup() once again
  dell-wmi: support Dell Inspiron M5110
  dell-wmi: properly process Dell Instant Launch hotkey
  dell-wmi: enable receiving WMI events on Dell Vostro V131
  dell-smbios: rename dell_smi_error() to dell_smbios_error()
  dell-laptop: move dell_smi_error() to dell-smbios
  ideapad-laptop: Add ideapad Y700 (15) to the no_hw_rfkill DMI list
  fujitsu-laptop: Support radio toggle button
  intel-hid: allocate correct amount of memory for private struct
  platform/x86: Make intel_scu_ipc explicitly non-modular
  intel_pmc_ipc: Avoid pending IPC1 command during legacy suspend
  intel_pmc_ipc: Fix GCR register base address and length
  asus-nb-wmi: add wapf=4 quirk for ASUS X75VD
  intel_telemetry_pltdrv: Change verbosity control bits
  dell-rbtn: Add a comment about the XPS 13 9350
  dell-wmi: Support new hotkeys on the XPS 13 9350 (Skylake)
  dell-wmi: Clean up hotkey table size check
  dell-wmi, dell-laptop: depends DMI
  dell-wmi: Stop storing pointers to DMI tables
  ...
2016-03-23 17:20:59 -07:00
Maciej S. Szmigiero fffcad87d4 hp-wmi: Remove GPS rfkill support via pre-2009 interface
GPS rfkill support via pre-2009 WMI interface uses hp_wmi_get_sw_state()
and hp_wmi_get_hw_state() to query its current hard and soft block state,
respectively.

In hp_wmi_get_sw_state() a mask is calculated which bit should be checked
in an int value returned by firmware to get current block state: 0x200 <<
(r * 8) which with r being 3 for GPS results in overflow and mask of zero.
The same goes for hp_wmi_get_hw_state().

This effectively means that GPS rfkill on this WMI interface is considered
always both hard and soft blocked.

Unfortunately, later when rfkill subsystem calls hp_wmi_set_block() to sync
this block to hardware firmware at least on my old nc6400 gets confused and
sets both hard and soft blocks on WiFi and BT.

This happens for example on hp-wmi module load.

Since due to overflow described above it is dubious that this ever worked
correctly and HP laptops with modems having GPS support seem to all have
been released well past year 2009 let's just remove GPS rfkill support via
pre-2009 WMI interface.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:51 -07:00
Maciej S. Szmigiero c7805e5459 hp-wmi: fix unregister order in hp_wmi_rfkill_setup() once again
rfkill registration order in hp_wmi_rfkill_setup() is:
1) WiFi,
2) BT,
3) WWAN,
5) GPS.

Unregistration when cleaning up on error return should happen in reverse
order.

This means that: If BT rfkill fails to be allocated we possibly need to
first unregister WiFi rfkill before destroying it.

The same goes with (WWAN, BT) and (GPS, WWAN) pairs.

Also, if WWAN rfkill fails to register we need to (possibly) unregister BT
not the GPS one.  And if GPS rfkill fails to register we need to unregister
WWAN not the BT one.

We never need to unregister GPS rfkill here since if GPS rfkill
registration succeeds this function returns without error so no cleanup is
necessary.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:51 -07:00
Michał Kępień aaf3a5e775 dell-wmi: support Dell Inspiron M5110
Similarly to Dell Vostro V131, Dell Inspiron M5110 also requires an
SMBIOS request to be issued in order for WMI events to be generated and
does not raise an i8042 interrupt when the Dell Instant Launch hotkey is
pressed.  However, the event code for that hotkey on this machine is
0xe029, so add it to the legacy keymap.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Darek Stojaczyk <darek.stojaczyk@gmail.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:51 -07:00
Michał Kępień 13f5059ac5 dell-wmi: properly process Dell Instant Launch hotkey
On models on which an SMBIOS request needs to be issued in order for WMI
events to be generated, pressing the Dell Instant Launch hotkey does not
raise an i8042 interrupt - only a WMI event is generated (0xe025 on Dell
Vostro V131).  As that WMI event is the only way the kernel will be
notified about pressing the Dell Instant Launch hotkey on such machines,
the relevant keymap entry has to be changed to a KE_KEY one.  However,
the same WMI event should still be ignored on machines which do not
require an SMBIOS request for enabling WMI, so filter it conditionally
in dell_wmi_process_key().

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:50 -07:00
Michał Kępień e09c4d5b15 dell-wmi: enable receiving WMI events on Dell Vostro V131
On some laptop models (e.g. Dell Vostro V131), WMI events are not
generated until a specific SMBIOS request is issued to register an event
listener [1].  As there seems to be no ACPI method or SMBIOS request to
determine without possible side effects whether a given machine needs to
issue this SMBIOS request in order to receive WMI events, DMI matching
is used to whitelist the models which need it.

[1] https://lists.us.dell.com/pipermail/libsmbios-devel/2015-July/000612.html

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:50 -07:00
Michał Kępień 0db2180fce dell-smbios: rename dell_smi_error() to dell_smbios_error()
As dell_smi_error() is exported by dell-smbios, its prefix should be
consistent with other exported symbols, so change function name to
dell_smbios_error().

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:49 -07:00
Michał Kępień e8edf53b19 dell-laptop: move dell_smi_error() to dell-smbios
The dell_smi_error() method could be used by modules other than
dell-laptop for convenient translation of SMBIOS request errors into
errno values.  Thus, move it to dell-smbios.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:49 -07:00
John Dahlstrom 4db9675d92 ideapad-laptop: Add ideapad Y700 (15) to the no_hw_rfkill DMI list
Some Lenovo ideapad models lack a physical rfkill switch.
On Lenovo models ideapad Y700 Touch-15ISK and ideapad Y700-15ISK,
ideapad-laptop would wrongly report all radios as blocked by
hardware which caused wireless network connections to fail.

Add these models without an rfkill switch to the no_hw_rfkill list.

Signed-off-by: John Dahlstrom <jodarom@sdf.org>
Cc: <stable@vger.kernel.org> # 3.17.x-: 4fa9dab: ideapad_laptop: Lenovo G50-30 fix rfkill reports wireless blocked
Cc: <stable@vger.kernel.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:49 -07:00
Michał Kępień b5df36cf47 fujitsu-laptop: Support radio toggle button
Lifebook E734/E744/E754 has a radio toggle button which uses code 0x420.
Map it to KEY_RFKILL.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:48 -07:00
Wolfram Sang e8b69a51b4 intel-hid: allocate correct amount of memory for private struct
We want the size of the struct, not of a pointer to it. To be future
proof, just dereference the pointer to get the desired type.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:48 -07:00
Paul Gortmaker f52ab44fb7 platform/x86: Make intel_scu_ipc explicitly non-modular
The Kconfig currently controlling compilation of this code is:

drivers/platform/x86/Kconfig:config INTEL_SCU_IPC
drivers/platform/x86/Kconfig:   bool "Intel SCU IPC Support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_pci_driver() uses the same init level priority as
builtin_pci_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We don't replace module.h with init.h since the file already has that.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:47 -07:00
Qipeng Zha 1f1ae997fd intel_pmc_ipc: Avoid pending IPC1 command during legacy suspend
During legacy suspend flow, IPC1 commands are being requested
from opregion driver. But the PMC_IPC1 command will timeout as example:

[  281.444600] ipc_debug##: ipc_send_command: cmd=0x201ff,
[  281.444648] wbuf[0]=0x4ea6
[  281.444668] wbuf[1]=0x0
[  281.444674] wbuf[2]=0x0
[  281.444676] wbuf[3]=0x0
[  284.446467] pmc-ipc-plat INT34D2:00: IPC timed out, TS=0x4, CMD=0x200ff

This is because before the opregion driver could send IPC1 commands,
the PMC_IPC irq is already suspended. Which makes the IPC command to
timeout.

Solution: register pmc_ipc irq as IRQF_NO_SUSPEND

Signed-off-by: Ananth Krishna R <ananth.krishna.r@intel.com>
Signed-off-by: Bharath K Veera <bharath.k.veera@intel.com>
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:47 -07:00
Qipeng Zha 1a2f25d5e7 intel_pmc_ipc: Fix GCR register base address and length
GCR register (pmc_cfg register) is at offset 0x1008, and
remapping of 0x4 bytes is enough.

Signed-off-by: Francois-Nicolas Muller <francois-nicolas.muller@intel.com>
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:47 -07:00
Oleksandr Natalenko 4670768779 asus-nb-wmi: add wapf=4 quirk for ASUS X75VD
Wi-Fi on ASUS X75VD laptop does not work unless asus_nb_wmi module
is loaded with wapf=4 option. Add quirk for this.

Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:46 -07:00
Souvik Kumar Chakravarty 479f3b62d6 intel_telemetry_pltdrv: Change verbosity control bits
Due to a recent fix in the firmware, the Punit verbosity control bits
now adhere to the correct pattern. Hence remove the workaround and
do a read-modify-write of the register.

Signed-off-by: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:46 -07:00
Andy Lutomirski 4d340c6b9c dell-rbtn: Add a comment about the XPS 13 9350
On the XPS 13 9350, the dell-rbtn mechanism has a new device id, and
the DSDT turns it off if a new enough _OSI is supported.  Add a
comment about why we don't bother supporting it.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:46 -07:00
Andy Lutomirski a464afb958 dell-wmi: Support new hotkeys on the XPS 13 9350 (Skylake)
The XPS 13 9350 sends WMI keypress events that aren't enumerated in
the DMI table.  Add a table listing them.  To avoid breaking things
that worked before, these un-enumerated hotkeys won't be used if the
DMI table maps them to something else.

FWIW, it appears that the DMI table may be a legacy thing and we
might want to rethink how we handle events in general.  As an
example, a whole lot of things map to KEY_PROG3 via the DMI table.

This doesn't send keypress events for any of the new events.  They
appear to all be handled by other means (keyboard illumination is
handled automatically and rfkill is handled by intel-hid).

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:45 -07:00
Andy Lutomirski b13de7019c dell-wmi: Clean up hotkey table size check
Checking the table for a minimum size of 7 bytes makes no sense: any valid
hotkey table has a size that's a multiple of 4.

Clean this up: replace the hardcoded header length with a sizeof and
change the check to ignore an empty hotkey table.  The only behavior
change is that a 7-byte table (which is nonsensical) will now be
treated as absent instead of as valid but empty.

Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:45 -07:00
Andy Lutomirski a570af4850 dell-wmi, dell-laptop: depends DMI
dell-wmi and dell-laptop will compile but won't work right if DMI
isn't selected.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Pali Rohár <pali.rohar@gmail.com>

[arnd: Use depends instead of selects to avoid recursive dependencies]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:44 -07:00
Andy Lutomirski 18b6f80f50 dell-wmi: Stop storing pointers to DMI tables
The dmi_walk function maps the DMI table, walks it, and unmaps it.
This means that the dell_bios_hotkey_table that find_hk_type stores
points to unmapped memory by the time it gets read.

I've been able to trigger crashes caused by the stale pointer a
couple of times, but never on a stock kernel.

Fix it by generating the keymap in the dmi_walk callback instead of
storing a pointer.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:44 -07:00
Michał Kępień b7bca2d7ff dell-smbios: make da_tokens static
As dell-laptop has been changed to use dell_smbios_find_token() instead
of directly accessing members of the da_tokens table, the latter can be
marked static.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:43 -07:00
Michał Kępień 73511ff30c dell-smbios: remove find_token_{id,location}()
As dell-laptop has been changed to use dell_smbios_find_token() instead
of find_token_id() and find_token_location(), these functions can be
safely removed.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:42 -07:00
Michał Kępień f951d6e6fa dell-laptop: use dell_smbios_find_token() instead of find_token_location()
Replace all uses of find_token_location() with dell_smbios_find_token()
to avoid directly accessing the da_tokens table.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:42 -07:00
Michał Kępień 63c4029bdf dell-laptop: use dell_smbios_find_token() instead of find_token_id()
Replace all uses of find_token_id() with dell_smbios_find_token() to
avoid directly accessing the da_tokens table.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:42 -07:00
Michał Kępień 96f7ef90cc dell-smbios: implement new function for finding DMI table 0xDA tokens
Ultimately, the da_tokens table should not be exported from dell-smbios.
Currently, in some cases, dell-laptop accesses that table's members
directly, so implement a new function, dell_smbios_find_token(), which
returns a pointer to an entry inside the da_tokens table with the given
token ID (or NULL if it is not found).

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:41 -07:00
Michał Kępień 92ebd0d1a8 dell-smbios: make the SMBIOS buffer static
As dell-laptop has been changed to always retrieve a pointer to the
SMBIOS buffer using dell_smbios_get_buffer(), the SMBIOS buffer can be
marked static.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:41 -07:00
Michał Kępień bc2104c27a dell-smbios: return the SMBIOS buffer from dell_smbios_get_buffer()
Ultimately, the SMBIOS buffer should not be exported from dell-smbios.
Currently, dell-laptop accesses it directly using a global variable, so
make dell_smbios_get_buffer() return a pointer to the SMBIOS buffer and
replace all uses of the global variable with local variables.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:40 -07:00
Michał Kępień c42831c8a9 dell-smbios: don't return an SMBIOS buffer from dell_smbios_send_request()
An SMBIOS buffer pointer does not need to be returned by
dell_smbios_send_request(), because SMBIOS call results are stored in
the buffer exported by the module.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:40 -07:00
Michał Kępień 17070f242a dell-smbios: don't pass an SMBIOS buffer to dell_smbios_send_request()
Passing an SMBIOS buffer pointer to dell_smbios_send_request() is
redundant as it should always operate on the SMBIOS buffer exported from
the module.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:40 -07:00
Michał Kępień 2f26213615 dell-smbios: rename dell_send_request() to dell_smbios_send_request()
As dell_send_request() is exported from the module, its prefix should be
consistent with other exported symbols, so change function name to
dell_smbios_send_request().

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:39 -07:00
Michał Kępień cb16176380 dell-smbios: rename release_buffer() to dell_smbios_release_buffer()
As release_buffer() is exported from the module, it has to be renamed to
something less generic, so add a "dell_smbios_" prefix to the function
name.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:39 -07:00
Michał Kępień b6aa7e1817 dell-smbios: rename clear_buffer() to dell_smbios_clear_buffer()
As clear_buffer() is exported from the module, it has to be renamed to
something less generic, so add a "dell_smbios_" prefix to the function
name.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:38 -07:00
Michał Kępień ee83c47541 dell-smbios: rename get_buffer() to dell_smbios_get_buffer()
As get_buffer() is exported from the module, it has to be renamed to
something less generic, so add a "dell_smbios_" prefix to the function
name.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:38 -07:00
Michał Kępień 2f9f26bd86 dell-laptop: extract SMBIOS-related code to a separate module
Extract SMBIOS-related code from dell-laptop to a new kernel module,
dell-smbios.  The static specifier is removed from exported symbols,
otherwise code is just moved around.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
[dvhart: Include linux/io.h in dell-smbios.c as caught by lkp]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:38 -07:00
Azael Avalos 7faa6a37fa toshiba_acpi: Add a module parameter to disable hotkeys registration
Some laptop models have working hotkeys without the need of the driver
to activate them.

This patch adds a module parameter to tell the driver not to register
the hotkeys.

The new parameter is useful in DE less installations or where the DE
does not handle the hotkeys (see bug 99501).

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:37 -07:00
Azael Avalos b1009b919b toshiba_acpi: Add sysfs entries for the Cooling Method feature
This patch adds the sysfs entry

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:37 -07:00
Azael Avalos 763ff32f19 toshiba_acpi: Add support for cooling method feature
This patch adds support to query and set the "Cooling Method" feature,
which basically changes how the system fan behaves, depending on the
supported cooling methods.

Depending on the laptop model, these are the (so far...) available
cooling methods:
- Maximum Performance
- Performance
- Battery Optimized

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:36 -07:00
Eric Curtin 15c75626f0 thinkpad_acpi: Remove ambiguous logging for "Unsupported brightness interface"
"Unsupported brightness interface" message gets logged on
 machines that are well supported.

Signed-off-by: Eric Curtin <ericcurtin17@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-03-23 10:05:25 -07:00
Dave Airlie 9b61c0fcdf Merge drm-fixes into drm-next.
Nouveau wanted this to avoid some worse conflicts when I merge that.
2016-03-14 09:46:02 +10:00
Lukas Wunner 2413306c25 apple-gmux: Add helper for presence detect
Centralize gmux' ACPI HID in a header file and add apple_gmux_present().
This can be used by other drivers to activate quirks specific to dual
GPU MacBook Pros & Mac Pros. The alternative would be to hardcode DMI
or PCI IDs and amend them whenever Apple introduces a new machine.

Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/89c23769058a340e5e11d4a7102f3793d3b0c94c.1452525860.git.lukas@wunner.de
2016-02-09 11:21:11 +01:00
Lukas Wunner f798d96528 apple-gmux: Add switch_ddc support
Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04:
    The gmux allows muxing the DDC independently from the display, so
    support this functionality. This will allow reading the EDID for the
    inactive GPU, fixing issues with machines that either don't have a
    VBT or have invalid mode data in the VBT.

Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-12:
    Change semantics of ->switch_ddc handler callback to return previous
    DDC owner. Original version tried to determine previous DDC owner
    with find_active_client() in vga_switcheroo but this fails if the
    inactive client registers before the active client.

    v2.4: Retain semantics of ->switchto handler callback to switch all
          pins, including DDC (Daniel Vetter)

    v4:   Advertise ->switch_ddc handler callback only on the pre-retina
          Macbook Pro. The retina uses eDP instead of LVDS and gmux no
          longer does the muxing itself but merely controls an external
          mux. That mux is incapable of switching the AUX channel
          separately from the main link. It's an NXP CBTL06142
          (alternate parts: TI HD3SS212, Pericom PI3VDP12412,
          see datasheets below).

    v5:   Rebase on "apple-gmux: Track switch state".
          Rebase on "vga_switcheroo: Add handler flags infrastructure".
          Rebase on 5d170139eb ("Constify vga_switcheroo_handler"),
          requires 2 structs, 1x with ->switchto for pre-retinas,
          1x without for retinas).
          Add error message if handler registration with vga_switcheroo
          fails.

    Teardowns identifying the mux:
    http://www.electronicproducts.com/-whatsinside_text-145.aspx
    http://slideshare.net/jjwu6266/apple-2012-wwdc-apple-macbook-pro-with-retina-display
    http://www.techrepublic.com/blog/cracking-open/teardown-shows-retina-macbook-pro-is-nearly-impossible-to-upgrade-difficult-to-work-on/

    Mux Datasheets:
    http://www.nxp.com/documents/data_sheet/CBTL06141.pdf
    http://www.ti.com/lit/ds/symlink/hd3ss212.pdf
    https://www.pericom.com/assets/Datasheets/PI3VDP12412.pdf

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Cc: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/17fe8bfb0415d713bb4174f84ac9aae5d7d9a5f8.1452525860.git.lukas@wunner.de
2016-02-09 11:21:08 +01:00
Lukas Wunner 3e46304e74 apple-gmux: Track switch state
gmux has 3 switch registers:

* GMUX_PORT_SWITCH_DISPLAY switches the panel
* GMUX_PORT_SWITCH_DDC switches the panel's DDC lines
  (only on pre-retinas; on retinas this is a no-op)
* GMUX_PORT_SWITCH_EXTERNAL switches the external DP port(s)
  (only on models without Thunderbolt, i.e. introduced before 2011;
  those with Thunderbolt switch only HPD/AUX, not the main link)

Currently we switch all 3 registers in unison.

gmux does not preserve the switch state during suspend, so we currently
read GMUX_PORT_SWITCH_DISPLAY before suspend and restore all 3 registers
to this value on resume.

With the upcoming ->switch_ddc callback, GMUX_PORT_SWITCH_DDC may
temporarily contain a different value than the other 2 registers.
If we happen to suspend at this moment, we'll write an incorrect
value to GMUX_PORT_SWITCH_DDC on resume.

Also, on models with Thunderbolt the integrated GPU is unable to drive
the external DP port(s), so we want to keep GMUX_PORT_SWITCH_EXTERNAL
permanently switched to the discrete GPU on those machines.

Consequently we can no longer assume that GMUX_PORT_SWITCH_DISPLAY
represents the correct value for all 3 registers on suspend.

Track the state of all 3 registers: Add gmux_read_switch_state() and
gmux_write_switch_state(). Instead of reading the switch state on
every suspend, read it once on driver initialization so that we know
the current switch state all the time. (This allows us to use some
optimizations and shortcuts, e.g. we can skip switching DDC if we
know that it's already switched to the requested GPU.) Change the
->switchto callback to use gmux_write_switch_state().

Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/5679f414cb0ddf1654dcc359571f3764b275edf0.1452525860.git.lukas@wunner.de
2016-02-09 11:21:08 +01:00
Lukas Wunner 156d7d4120 vga_switcheroo: Add handler flags infrastructure
Allow handlers to declare their capabilities and allow clients to
obtain that information. So far we have these use cases:

* If the handler is able to switch DDC separately, clients need to
  probe EDID with drm_get_edid_switcheroo(). We should allow them
  to detect a capable handler to ensure this function only gets
  called when needed.

* Likewise if the handler is unable to switch AUX separately, the active
  client needs to communicate link training parameters to the inactive
  client, which may then skip the AUX handshake and set up its output
  with these pre-calibrated values (DisplayPort specification v1.1a,
  section 2.5.3.3). Clients need a way to recognize such a situation.

The flags for the radeon_atpx_handler and amdgpu_atpx_handler are
initially set to 0, this can later on be amended with
  handler_flags |= VGA_SWITCHEROO_CAN_SWITCH_DDC;
when a ->switch_ddc callback is added.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina  15"]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/2b0d93ed6e511ca09e95e45e0b35627f330fabce.1452525860.git.lukas@wunner.de
2016-02-09 11:21:07 +01:00
Mario Limonciello ec5eeadc44 alienware-wmi: whitespace improvements
These were some items that were pointed out in previous patches that
weren't caught be previous reviewers, but should be applied to other
parts of the driver as well.

Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
[dvhart: reverted a couple incorrect line wrapping changes]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-02-07 12:01:33 -08:00
Mario Limonciello b332f82e38 alienware-wmi: Add support for two new systems: ASM200 and ASM201.
Both of these systems support:
* 2 lighting control zones
* HDMI mux control
* deep sleep control (to enable wakup from controller)

The ASM201 also supports the external graphics amplifier.

Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-02-07 11:59:43 -08:00
Mario Limonciello 8ea81ec67b alienware-wmi: Add support for deep sleep control.
Allow for user configuration of BIOS settings that allow the system to be
turned on via HID devices.

The feature requires hardware architectural modifications and can not be
supported on existing systems.

Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
[dvhart: comment formatting and line length fixes]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-02-07 11:58:58 -08:00
Mario Limonciello cbbb50d603 alienware-wmi: Add initial support for alienware graphics amplifier.
The alienware graphics amplifier is a device that provides external access
to a full PCIe slot, USB hub, and additional control zone.

This patch enables support for reading status whether the cable is plugged
in as well as for setting the colors in the new zone on the amplifier.

Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
[dvhart: minor comment formatting fixes]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-02-07 11:56:17 -08:00
Mario Limonciello 9e503a9d0c alienware-wmi: Add support for new platform: X51-R3
The X51-R3 is in the X51 family.  It includes 3 internal
lighting zones as well as is the first AW desktop that
includes support for a graphics amplifier.

Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-02-07 11:52:16 -08:00
Mario Limonciello 66ad0dd302 alienware-wmi: Clean up whitespace for ASM100 platform
This brings them more in line with the usage of whitespace
in other platforms.

Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-02-07 11:52:16 -08:00