The "where" offset was added twice, fix it.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Fixes: 498a92d425 ("ARM: cns3xxx: pci: avoid potential stack overflow")
Signed-off-by: Olof Johansson <olof@lixom.net>
The cns3xxx_pcie_hw_init function uses excessive kernel
stack space because of a hack that puts a fake struct
pci_sys_data and struct pci_bus on the stack in order to
call the generic pci_bus_read_config accessors, which causes
a warning in ARM allmodconfig builds:
arch/arm/mach-cns3xxx/pcie.c:266:1: warning: the frame size of 1080 bytes is larger than 1024 bytes
I've spent a few hours trying to find out what exactly this
code is wants to achieve here. The obvious part is setting
up the host_regs using config space accessors, and this can
simply be changed to use direct MMIO accesses, as I do
in this patch.
The second part is how the driver sets up the Max_Read_Request_Size
value for the first device/function on bus 1, i.e. the device
plugged directly into the PCIe root port.
For all I can tell, this is in fact incomplete, as it does not
perform the same setting on devices attached to a PCIe switch,
or multi-function devices.
The solution for this part fortunately is even easier: if we
just set the global pcie_bus_config variable to PCIE_BUS_PEER2PEER,
all PCIe devices in the system are limited to 128 byte MPS, which
in turn limits the MRRS to 128 bytes for all devices, and we
no longer even need to touch any devices.
With those two changes in place, we no longer need the fake
pci_sys_data/pci_bus structures for faking config space writes,
and the stack usage goes down as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
* pci/config:
PCI: xilinx: Convert to use generic config accessors
PCI: xgene: Convert to use generic config accessors
PCI: tegra: Convert to use generic config accessors
PCI: rcar: Convert to use generic config accessors
PCI: generic: Convert to use generic config accessors
powerpc/powermac: Convert PCI to use generic config accessors
powerpc/fsl_pci: Convert PCI to use generic config accessors
ARM: ks8695: Convert PCI to use generic config accessors
ARM: sa1100: Convert PCI to use generic config accessors
ARM: integrator: Convert PCI to use generic config accessors
ARM: cns3xxx: Convert PCI to use generic config accessors
PCI: Add generic config accessors
powerpc/PCI: Add struct pci_ops member names to initialization
mn10300/PCI: Add struct pci_ops member names to initialization
MIPS: PCI: Add struct pci_ops member names to initialization
frv/PCI: Add struct pci_ops member names to initialization
Convert the cns3xxx PCI driver to use the generic config access functions.
This changes accesses from __raw_readl/__raw_writel to readl/writel.
[arnd: remove extra open parenthesis]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
CC: Russell King <linux@arm.linux.org.uk>
CC: linux-arm-kernel@lists.infradead.org
On cns3xxx platforms the PCI controller probing code relies on an
artificial dependency on the domain number to look-up the internal data
structures.
This patch reworks the host controller control data structure and adds a
domain equivalent field named port in it so that the dependency on
pci_sys_data domain field can be eventually removed.
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[lp: added commit log, removed pci_sys_data domain references]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Max_Read_Request_Size is 3 bits wide, not 2 bits.
Also fix the message.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Without this patch, each root port and the device connected directly to it seem
to be located on a shared (virtual) bus #0. It creates problems with enabling
devices (the PCI code doesn't know that the root bridge must be enabled in order
to access other devices).
The PCIe topology shown by lspci doesn't reflect reality, e.g.:
0000:00:00.0 PCI bridge: Cavium Networks Device 3400
0000:00:01.0 PCI bridge: Texas Instruments XIO2001 PCI Express-to-PCI Bridge
0000:02:...
0001:00:00.0 PCI bridge: Cavium Networks Device 3400 (for the second lane/bus)
-+-[0001:00]---00.0-[01]--
\-[0000:00]-+-00.0-[01]--
| ^^^^ root bridge
\-01.0-[02]----...
^^^^ first external device
With this patch, the first external PCIe device is connected to bus #1
(behind the root bridge).
-+-[0001:00]---00.0-[01]--
\-[0000:00]---00.0-[01-02]----------00.0-[02]----...
^^^^ root bridge ^^^^ first external device
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The kernel panic occurs when running an allmodconfig kernel on
OMAP4460. The inicall "cns3xxx_pcie_init" does not check which
hardware it's running on and just tries to access to its specific
registers. Now call it from .init_late callback from the two
machine descriptors.
Signed-off-by: Xia Kaixu <kaixu.xia@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: linaro-kernel@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
This patch fixes the following BUG:
> kernel BUG at mm/vmalloc.c:1132!
> PC is at vm_area_add_early+0x20/0x84
> LR is at add_static_vm_early+0xc/0x60
>
> The problem is cns3xxx_pcie_init() (device_initcall) calls the "early"
> iotable_init().
Instead of merely calling the PCIe iotable_init() from
machine_desc->map_io(), this patch adds the required mappings to the
main CNS3xxx mapping table. This means we don't convert .pfn back to
virtual addresses in pcie.c. The size of the address space consumed for
PCIe control is reduced from 96 MiB (6 * 16 MiB) to about 32 MiB (this
doesn't include MMIO address space required by PCI devices):
- Size of the PCIe "host" mapping is reduced from 16 MiB to 4 KiB.
It's a PCI configuration address space for the local (on-chip) PCIe
bridge.
- Size of the "CFG0" mapping is reduced from 16 MiB to 64 KiB. It's for
Type 0 Configuration accesses, i.e., accesses to the single device
(with possible "functions") on the other end of the PCIe link.
We really only need a 4 KiB page at 0x8000 (see the offset
calculation in cns3xxx_pci_cfg_base()). There is still a potential
problem with PCI bus numbers > 0xF, are they supported?
- The code in cns3xxx_pci_cfg_base() and cns3xxx_pcie_hw_init() should
be clearer now.
- The maximum address space allocated for PCI MMIO is now correctly
shown in /proc/iomem as 176 MiB (per each of the two PCI "domains"
- previously only 16 MiB were reserved).
This patch has been tested on Gateworks Laguna board, masqueraded as
CNS3420VB.
Signed-off-by: Krzysztof Ha?asa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The mach/cns3xxx.h and mach/pm.h header files are used only
in the platform code itself, so there is no need to make
them globally visible. This gets us closer to multiplatform
configuration for cns3xxx.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most PCI implementations perform simple root bus scanning. Rather than
having each group of platforms provide a duplicated bus scan function,
provide the PCI configuration ops structure via the hw_pci structure,
and call the root bus scanning function from core ARM PCI code.
Acked-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Most PCI implementations use the standard PCI swizzle function, which
handles the well defined behaviour of PCI-to-PCI bridges which can be
found on cards (eg, four port ethernet cards.)
Rather than having almost every platform specify the standard swizzle
function, make this the default when no swizzle function is supplied.
Therefore, a swizzle function only needs to be provided when there is
something exceptional which needs to be handled.
This gets rid of the swizzle initializer from 47 files, and leaves us
with just two platforms specifying a swizzle function: ARM Integrator
and Chalice CATS.
Acked-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.
CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus
resource fixups. This fixes the problem of "early" and "header" quirks
seeing incorrect root bus resources.
CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
commit d5341942d7 ("PCI: Make the struct
pci_dev * argument of pci_fixup_irqs const") did not change argument
of pdev_to_cnspci(), and thus introduced the following warnings:
CHECK arch/arm/mach-cns3xxx/pcie.c
pcie.c:177:60: warning: incorrect type in argument 1 (different modifiers)
pcie.c:177:60: expected struct pci_dev *dev
pcie.c:177:60: got struct pci_dev const *dev
CC arch/arm/mach-cns3xxx/pcie.o
pcie.c: In function 'cns3xxx_pcie_map_irq':
pcie.c:177: warning: passing argument 1 of 'pdev_to_cnspci' discards qualifiers from pointer target type
pcie.c:52: note: expected 'struct pci_dev *' but argument is of type 'const struct pci_dev *'
This patch fixes the issue.
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: remove printks about disabled bridge windows
PCI: fold pci_calc_resource_flags() into decode_bar()
PCI: treat mem BAR type "11" (reserved) as 32-bit, not 64-bit, BAR
PCI: correct pcie_set_readrq write size
PCI: pciehp: change wait time for valid configuration access
x86/PCI: Preserve existing pci=bfsort whitelist for Dell systems
PCI: ARI is a PCIe v2 feature
x86/PCI: quirks: Use pci_dev->revision
PCI: Make the struct pci_dev * argument of pci_fixup_irqs const.
PCI hotplug: cpqphp: use pci_dev->vendor
PCI hotplug: cpqphp: use pci_dev->subsystem_{vendor|device}
x86/PCI: config space accessor functions should not ignore the segment argument
PCI: Assign values to 'pci_obff_signal_type' enumeration constants
x86/PCI: reduce severity of host bridge window conflict warnings
PCI: enumerate the PCI device only removed out PCI hieratchy of OS when re-scanning PCI
PCI: PCIe AER: add aer_recover_queue
x86/PCI: select direct access mode for mmconfig option
PCI hotplug: Rename is_ejectable which also exists in dock.c
Aside of the usual motivation for constification, this function has a
history of being abused a hook for interrupt and other fixups so I turned
this function const ages ago in the MIPS code but it should be done
treewide.
Due to function pointer passing in varous places a few other functions
had to be constified as well.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
To: Anton Vorontsov <avorontsov@mvista.com>
To: Chris Metcalf <cmetcalf@tilera.com>
To: Colin Cross <ccross@android.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
To: Eric Miao <eric.y.miao@gmail.com>
To: Erik Gilling <konkers@android.com>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
To: "H. Peter Anvin" <hpa@zytor.com>
To: Imre Kaloz <kaloz@openwrt.org>
To: Ingo Molnar <mingo@redhat.com>
To: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
To: Krzysztof Halasa <khc@pm.waw.pl>
To: Lennert Buytenhek <kernel@wantstofly.org>
To: Matt Turner <mattst88@gmail.com>
To: Nicolas Pitre <nico@fluxnic.net>
To: Olof Johansson <olof@lixom.net>
Acked-by: Paul Mundt <lethal@linux-sh.org>
To: Richard Henderson <rth@twiddle.net>
To: Russell King <linux@arm.linux.org.uk>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-pci@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: x86@kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Convert PCIBIOS_MIN_IO and PCIBIOS_MIN_MEM to variables to allow
multi-platform builds. This also removes the requirement for a platform to
have a mach/hardware.h.
The default values for i/o and mem are 0x1000 and 0x01000000, respectively.
Per Arnd Bergmann, other values are likely to be incorrect, but this commit
does not try to address that issue.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
commit 6338a6aa7c ("ARM: 6269/1: Add 'code'
parameter for hook_fault_code()") breaks CNS3xxx build:
CC arch/arm/mach-cns3xxx/pcie.o
pcie.c: In function 'cns3xxx_pcie_init':
pcie.c:373: warning: passing argument 4 of 'hook_fault_code' makes integer from pointer without a cast
pcie.c:373: error: too few arguments to function 'hook_fault_code'
This commit fixes the small issue.
Cc: stable@kernel.org [36]
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
This patch adds PCIe support for CNS3xxx-based boards. The support
was tested with a directly attached SKY2 NIC, and EHCI USB controller
behind the PLX PEX8112 P2P bridge (to make sure that type1 cfg cycles
work as expected).
Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Krzysztof Halasa