This patch adds support for QCOM SPMI PMIC5 family
of ADC driver that supports hardware based offset and
gain compensation. The ADC peripheral can measure both
voltage and current channels whose input signal is
connected to the PMIC ADC AMUX.
The register set and configuration has been refreshed
compared to the prior QCOM PMIC ADC family. Register
ADC5 as part of the IIO framework.
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The regmap API usually assumes that bulk read operations will read a
range of registers but some I2C/SPI devices have certain registers for
which a such a read operation will return data from an internal FIFO
instead. Add an explicit API to support bulk read without range semantics.
Some linux drivers use regmap_bulk_read or regmap_raw_read for such
registers, for example mpu6050 or bmi150 from IIO. This only happens to
work because when caching is disabled a single regmap read op will map
to a single bus read op (as desired). This breaks if caching is enabled and
reg+1 happens to be a cacheable register.
Without regmap support refactoring a driver to enable regmap caching
requires separate I2C and SPI paths. This is exactly what regmap is
supposed to help avoid.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
PMIC5 ADC has support for clients to measure voltage and current
on inputs connected to the PMIC. Clients include reading voltage
phone power and on board system thermistors for thermal management.
ADC5 on certain PMIC has support to read battery current.
This change adds documentation.
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
fix spelling mistake in dev_err error message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As Stephen Rothwell reported:
"After merging the staging tree, today's linux-next build (x86_64
allmodconfig) failed like this:
drivers/staging/erofs/super.c: In function 'erofs_read_super':
drivers/staging/erofs/super.c:343:17: error: 'MS_RDONLY' undeclared (first use in this function); did you mean 'IS_RDONLY'?
sb->s_flags |= MS_RDONLY | MS_NOATIME;
^~~~~~~~~
IS_RDONLY
drivers/staging/erofs/super.c:343:17: note: each undeclared identifier is reported only once for each function it appears in
drivers/staging/erofs/super.c:343:29: error: 'MS_NOATIME' undeclared (first use in this function); did you mean 'S_NOATIME'?
sb->s_flags |= MS_RDONLY | MS_NOATIME;
^~~~~~~~~~
S_NOATIME
drivers/staging/erofs/super.c: In function 'erofs_mount':
drivers/staging/erofs/super.c:501:10: warning: passing argument 5 of 'mount_bdev' makes integer from pointer without a cast [-Wint-conversion]
&priv, erofs_fill_super);
^~~~~~~~~~~~~~~~
In file included from include/linux/buffer_head.h:12:0,
from drivers/staging/erofs/super.c:14:
include/linux/fs.h:2151:23: note: expected 'size_t {aka long unsigned int}' but argument is of type 'int (*)(struct super_block *, void *, int)'
extern struct dentry *mount_bdev(struct file_system_type *fs_type,
^~~~~~~~~~
drivers/staging/erofs/super.c:500:9: error: too few arguments to function 'mount_bdev'
return mount_bdev(fs_type, flags, dev_name,
^~~~~~~~~~
In file included from include/linux/buffer_head.h:12:0,
from drivers/staging/erofs/super.c:14:
include/linux/fs.h:2151:23: note: declared here
extern struct dentry *mount_bdev(struct file_system_type *fs_type,
^~~~~~~~~~
drivers/staging/erofs/super.c: At top level:
drivers/staging/erofs/super.c:518:20: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
.mount = erofs_mount,
^~~~~~~~~~~
drivers/staging/erofs/super.c:518:20: note: (near initialization for 'erofs_fs_type.mount')
drivers/staging/erofs/super.c: In function 'erofs_remount':
drivers/staging/erofs/super.c:630:12: error: 'MS_RDONLY' undeclared (first use in this function); did you mean 'IS_RDONLY'?
*flags |= MS_RDONLY;
^~~~~~~~~
IS_RDONLY
drivers/staging/erofs/super.c: At top level:
drivers/staging/erofs/super.c:640:16: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
.remount_fs = erofs_remount,
^~~~~~~~~~~~~
Caused by various commits creating erofs in the staging tree interacting
with various commits redoing the mount infrastructure in the vfs tree.
I have disabed CONFIG_EROFS_FS for now:"
The reason of compiling error is:
Since -next collects and merges developing patches including common vfs
stuff from multi-trees, but those patches didn't cover erofs, such as:
('vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled")
https://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs.git/commit/?h=for-next&id=109b45090d7d3ce2797bb1ef7f70eead5bfe0ff3
("vfs: Require specification of size of mount data for internal mounts")
https://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs.git/commit/?h=for-next&id=0a191e4505a4f255e6513b49426213da69bf0e80
Above vfs related patches has not been merged in staging tree, if we
submit those erofs patches to staging mailing list and after including
them in staging-{test,nexts} tree, it can easily cause compiling error.
We worked out some patches to adjust those vfs change, but now we just
submit them to -next tree temporarily to avoid compiling error.
For potentail conflict in between erofs and vfs changes in incoming
merge window, Stephen suggested that we can disable CONFIG_EROFS_FS
temporarily to pass merge window, and after that we can do restore by
reenabling CONFIG_EROFS_FS and applying those fixing patches. Also
Greg confirmed this solution.
So, let's disable compiling erofs for a while.
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set default value of allow_power_save parameter to enable power save
mode, which is expected to be the state usually desired.
Signed-off-by: Marty Faltesek <mfaltesek@google.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Apex doesn't implement different types of resets based on the reset type
param passed through the gasket layer or from userspace via the
gasket_reset ioctl. The reset type is dropped from the gasket framework
in a previous patch due to a lack of present need and non-conforming use
of this parameter by the framework. Drop the parameter from the apex
driver as well.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "type of reset" parameter to the gasket device reset APIs isn't
required by the only gasket device submitted upstream, apex.
The framework documents the param as private to the device driver and a
pass-through at the gasket layer, but the gasket core calls the device
driver with a hardcoded reset type of zero, which is not documented as
having a predefined meaning.
In light of all this, remove the reset type parameter from the
framework. Remove the reset ioctl reset type parameter, and bump the
framework version number to reflect the interface change.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A number of block comments have been changed to comply with the coding
standard. These are coding style changes which should have no impact
on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro IsACValid is renamed to resolve the checkpatch issue with
CamelCase naming. In addition the parameter has parenthesis added to
clear the checkpatch issue with precedence issues.
These changes are coding style changes and as such should have not
impact on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro UP2AC is commented out of the header file so the macro and its
associated comment are removed.
This is a coding style change which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the structure octet_string's member variables Octet to octet and
Length to length. This change clears the checkpatch issue with CamelCase
naming of variables.
This is purely a coding style change which should have no impact on
runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the structure OCTET_STRING to octet_string. This is to comply
with the coding style of using lowercase for types. In addition the
typedef directive is removed to clear the checkpatch issue with
defining new types.
These are coding style changes which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the union QOS_TCLAS from the header file rtl819x_Qos.h to header
file rtl819x_TS.h, where the structure is actually used, as the member
of another structure.
This is a coding style change, which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A number of structures have been commented out of code. Obviously they
are not used and as a result have been removed from the code.
This is a coding style change which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The member variables of the tspec_body have been renamed to clear the
checkpatch issue with CamelCase naming. As these member variables are
never used in the code the changes are combined into this single
patch.
These changes are coding style changes which should have no impact on
runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename TSInfo, the memeber variable of struct tspec_body to ts_info.
This change clears the checkpatch issue with CamelCase naming.
This is a coding style change which should not impact runtime code
execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The union TSPEC_BODY is never used as a union. The union comprises an
array of bytes and a bitfield structure, both of which are 55 bytes in
length, but the byte array is never used. As a result the union has
been truncated to the bitfield struct, which is actually used.
Additionally the typedef has been removed from the structure to clear
the checkpatch issue with defining new types. Additionally the name has
been changed to lowercase to comply with coding style.
These changes are all coding style changes which should have no impact
on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The member variables of struct qos_tsinfo all cause checkpatch issues
with CamelCase naming. As the variables are used in so few places the
changes are combined into this single patch.
Additionally the member variable usReserved is never used in code so
has been removed.
These are all coding style changes which should have no impact on
runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The union is never used as a union but only as a bitfield struct.
One side of the union (u8 charData[3];) Only seems to be present to
ensure that the structures size is 3 bytes in length. That length, of
the structure is dictated by the largest element of the union, so the
byte array only dictates size if it's the largest element of the union.
The byte array and union add nothing.
The union has therefore been removed and the structure and access to
the structure simplified.
Additionally since one of the bitfield variables (ucAccessPolicy)
spans a byte boundary the base type of the bitfield has been changed
from u8 to u16. Compilers have probably moved on from having an issue
with this, call it OCD.
The changes are coding style in nature and should not impact runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The union aci_aifsn is not used as a union, but only as a struct.
The union seems to have been used to ensure that the size of the
structure was only a single byte. That size is set by the bitfield
structure, adding a union with an unused byte adds nothing.
The union has been removed. This is a coding style change and
should not impact runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only useful piece of information in the header comment of this
static function was the name of the function and parameters. That
is not useful information, given that they are in the C Source of
the function declaration, a few lines below the comment. The block
comment has been removed.
This is a coding style change, there should be no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function rtw_remove_bcn_ie() is never used, so remove it.
Discovered by cppcheck.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function rtw_add_bcn_ie() is never used, so remove it.
Discovered by cppcheck.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use x instead of x != NULL.
Use !x instead of x == NULL.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use is_broadcast_ether_addr instead of checking each byte of the
address array for 0xff. Shortens the code and improves readability.
As required by is_broadcast_ether_addr, the address array sta_addr
is properly aligned in all uses. Thanks to Joe Perches.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use is_multicast_ether_addr instead of custom IS_MCAST.
The variable for the result of IS_MCAST was only used in the
if conditional. So remove the extra variable and move the call
to is_multicast_ether_addr into the conditional.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
File net.h contains definitions that are exclusively used by
the key generator/classification API. Merge its contents with
dpkg.h in order to reduce the number of private headers.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
File net.h has several bitmask defines that could be implemented
more clearly using the BIT() macro.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Comments in file net.h are too fancy for their own good,
so convert them to the regular format.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DPAA2 Ethernet driver files use a GPL-2.0+ OR BSD-3-Clause
license. Add SPDX tags and delete the full license text,
keeping the existing licenses for each file.
Add a GPL-2.0 tag for the Makefile.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the DPAA2 Ethernet driver documentation to .rst format
and rename the file accordingly.
Also add a SPDX tag to the new rst file.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the sparse warnings by making use of le32_to_cpus() &
cpu_to_le32s() conversion API's.
Remove the unnecessary byte-order conversion in
wilc_wlan_parse_response_frame() as the data is copied using individual
byte operation.
Also added the byte-order conversion for 'header' in
wilc_wfi_monitor_rx() & wilc_wfi_p2p_rx() as received in LE byte-order.
The link [1] contains the details of discussion related to this patch.
[1]. https://patchwork.kernel.org/patch/10436791/
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup patch to use the correct data type 'u16' for keeping the WID
value in 'wilc_cfg_word' & 'wilc_cfg_str' structure.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor wilc_wlan_handle_isr_ext() to avoid the use of the goto label.
Also avoid the unnecessary NULL check for 'wilc->rx_buffer' and
calling wilc_wlan_handle_rxq() only after wilc_wlan_rxq_add() call.
The link [1] contains details for discussion related to this changes.
[1]. https://patchwork.kernel.org/patch/10533601/
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup patch to use shorter name for 'rcvd_ch_cnt' to 'ch_cnt' to avoid
line over 80 character issue reported by checkpatch.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup patch to update the debug logs message to provide correct
information. Also added the function name tag for same description log
to help identify the place from where log was captured.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup patch to remove the unnecessary comments and commented code.
Also updated description for few of comments.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes to compile module component along with SPI and SDIO module.
Previously 'wilc1000.ko' used to generate along with wilc-spi.ko or
wilc1000-sdio.ko module. After these changes only wilc1000-spi.ko or
wilc1000-sdio.ko modules are required for SPI and SDIO respectively.
These changes are done to address below TODO item.
- make SPI and SDIO components coexist in one build
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds crtc page-flip support by passing the new requested framebuffer
to vbox_crtc_do_set_base().
Note there is no attempt to support vblank interrupts, it's not
not known how to do this in VBOX or if it is even possible. Since
this page-flip implementation does not try to sync the page-flip
to vertical blanking, tearing effects are possible.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This modifies vbox_crtc_do_set_base() to take a new framebuffer to
be activated, instead of the existing framebuffer attached to the crtc.
This change allows the function to be given the new framebuffer from
a page-flip request.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a somewhat sneaky late pull request given Linus has announced
a likely 1 week delay. If it is too late I'll resend after the merge
window. I merged in the fixes branch as those are primarily around
things queued for the merge window.
Particulary good to see the output of our Himanshu Jha, a GSOC student
who developed the bme680 driver.
New device support:
* bme680 gas sensor (with temperature, humidity and pressure)
- new driver to support this device
* vcn4000
- support vcnl4200 (lots of rework to allow this)
- ids added for VCNL4010 and VCNL4020 sensors
New features:
* ad9523
- support the various external signal options via gpios.
Cleanups and fixes
* ad_sigma_delta
- unsigned long for a timeout.
* ad9523
- fix a wrong return value that was indicating successful write failed
and might lead to an infinite loop.
* si1133
- fix an impossible test.
- fix an uninitialsed variable by reading from the device in all paths.
* xilinx xadc
- check for return values in clk related functions
- limit the pcap clock frequency to supported ranges.
- stash the irq to avoid calling platform_get_irq from the remove path.
- ensure the irq is actually requested before we enable the hardware to
output it.
-----BEGIN PGP SIGNATURE-----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=lYzx
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.19c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Third set of IIO new device support, cleanups and features for the 4.19 cycle.
This is a somewhat sneaky late pull request given Linus has announced
a likely 1 week delay. If it is too late I'll resend after the merge
window. I merged in the fixes branch as those are primarily around
things queued for the merge window.
Particulary good to see the output of our Himanshu Jha, a GSOC student
who developed the bme680 driver.
New device support:
* bme680 gas sensor (with temperature, humidity and pressure)
- new driver to support this device
* vcn4000
- support vcnl4200 (lots of rework to allow this)
- ids added for VCNL4010 and VCNL4020 sensors
New features:
* ad9523
- support the various external signal options via gpios.
Cleanups and fixes
* ad_sigma_delta
- unsigned long for a timeout.
* ad9523
- fix a wrong return value that was indicating successful write failed
and might lead to an infinite loop.
* si1133
- fix an impossible test.
- fix an uninitialsed variable by reading from the device in all paths.
* xilinx xadc
- check for return values in clk related functions
- limit the pcap clock frequency to supported ranges.
- stash the irq to avoid calling platform_get_irq from the remove path.
- ensure the irq is actually requested before we enable the hardware to
output it.
The include guard symbol for gasket_page_table.h is out-of-date.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Siddartha Mohanadoss