Commit Graph

8445 Commits

Author SHA1 Message Date
Arnd Bergmann 4d0b756ec7 Merge tag 'arm-soc/for-4.1/devicetree' of http://github.com/broadcom/stblinux into next/dt
Pull "Broadcom Device Tree changes for 4.1 #1" from Florian Fainelli:

This pull request contains the following Broadcom SoCs Device Tree changes:

- Jonathan adds support for the Broadcom Cygnus BCM958305K board

- Rafal adds support for Netgear R8000 and fixes the default for power LEDs
  on Netgear R6250

* tag 'arm-soc/for-4.1/devicetree' of http://github.com/broadcom/stblinux:
  ARM: BCM5301X: Fix default state of power LEDs on Netgear R6250
  ARM: BCM5301X: Add DT for Netgear R8000
  ARM: dts: Enable Broadcom Cygnus BCM958305K
2015-03-11 22:51:11 +01:00
Arnd Bergmann e3d00145e3 First batch of DT changes for 4.1:
- at91sam9x5 & EK board: ISI and camera sensors
 - at91sam9n12 & EK board: USB gadget nodes
 - sama5d3: typos, gpio-keys on Xplained board
 - sama5d4: i2c, leds, audio, ISI, crypto, pwm missing nodes
 - new sama5d4 xplained board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU+yDTAAoJEAf03oE53VmQMzEIAM6a3qG3+W7qFG5e0EQtTP+c
 Y5o0P2Q6Va0flxl1b/wEmtFnm4dZL0S/rwGO1VlnRBW5fE949jV3wfqNfMub5qiD
 9rW58SAR45NJLsArYP22DXnxy9YP3auQF10LvLWiWr/cDKAOYDs3P0PV5fWDhjED
 DKwh0dUdIhmVOSeR/0RJfDiEV2FIMGO+6xcWucI/SAMGvmD+pZiVARAGSfcB05Wi
 CMCZI/k5/JdFTXE6Dh7uUTxNqCpaQUy7BZNdl1Dr2YrkdLIHR+/FgpEu1V24Btx5
 i+mLApiQgfwZ3+eDlUnn4X1px3jMqEHnKIlBqNhT63hDhagupHcui1WnCI6hlSw=
 =/mm0
 -----END PGP SIGNATURE-----

Merge tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt

Pull "First batch of DT changes for 4.1" into next/dt:

- at91sam9x5 & EK board: ISI and camera sensors
- at91sam9n12 & EK board: USB gadget nodes
- sama5d3: typos, gpio-keys on Xplained board
- sama5d4: i2c, leds, audio, ISI, crypto, pwm missing nodes
- new sama5d4 xplained board

* tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: (31 commits)
  ARM: at91/dt: sama5d4: add ISI dt support
  ARM: at91/dt: sama5d4: add pwm0 device node
  ARM: at91/dt: sama5d4: add aes, sha and tdes nodes
  ARM: at91: dt: sama5d4ek: enable audio
  ARM: at91: dt: sama5d4ek: add and enable wm8904
  ARM: at91: dt: sama5d4ek: enable ssc0
  ARM: at91: dt: sama5d4: add ssc nodes
  ARM: at91/dt: sama5d4 xplained: add i2c0
  ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board
  ARM: at91/dt: sama5d4: add #{address, size}_cells properties for macb0
  ARM: at91/dt: sama5d4ek: add leds in DT node
  ARM: at91/dt: add i2c1 declaration to sama5d4
  ARM: at91/dt: gpio-keys: address-cells and size-cells properties are not needed
  ARM: at91/dt: at91-sama5d3_xplained: add gpio-key pinctrl property
  ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals
  ARM: at91/dt: at91sam9n12ek: enable udp
  ARM: at91/dt: at91sam9n12: add udp device node
  ARM: at91: at91sam9g25ek/dts: enable ISI and ov2640
  ARM: at91: at91sam9x5ek/dts: add ov2640 support
  ARM: at91: at91sam9x5/dts: add ISI dt support, include isi node, pinctrls
  ...
2015-03-11 22:48:55 +01:00
Arnd Bergmann 369237ab1f Renesas ARM Based SoC r8a7778 CCF and Multiplatform Updates for v4.1
* Add CCF and them multiplatform support to r8a7778 SoC and its
   bockw board.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU9671AAoJENfPZGlqN0++71UP/iuiuiyeF3Wgqc9Pu22hVg8g
 3qd0Hqw2iUx07KV29kGoJmAkL48A5zGOk/JqvLY2BX5+ZAdWxy4sbY/njMzeUAH6
 hRiZGbgb+7gRSsQNCbxmR6Kh1zx8akxrQOw7PzJs0Yjwh2I8+rrb+2qxDNy1RbO9
 KoTYk4j98mOLdwfGYixoVjSIdgt70JNKUn3LY0JHn6Ss38u/1zDB55PnlXeCKNfu
 t7WSwTxbdN1h0hJ03y3ZsTQMVb3BDYMfRFtWZCZ/AE4CFM53oeRVkXEewbPfPQBn
 b7A05JYKm8NfF8AnbHbgnRJU/3H9kCMylw/rcYGqXGgs2GDL8qxE1O45vsC0ONJj
 rKrwRqvz6d8DrSZmEfufI48ykOPKIsWjJw9TKv/8gXNxu0qF9QjqygEKBt4isOZ7
 DGqy46RZguhJAESZJkMqydpuLBG+QZ4NKXgm0fi9IhDooj/9qZWLpoaoeSZCO9fC
 6ZPGkFA86S9G44bcbrDkp2j86K0lVkoC/Zx/9ZcJMYxauj0/yvDKTH7a/iods7IN
 xvNxKGgl2en2oADsRAHb3+lGSbdpVo0wMzvf5l8qSMElIJKoDs/L0evykeOQEW83
 Kcyd0M3gaX9vSdjrGzrvq6lNXpshGLg/8e+0aAJ9G4x3UKhvc0UnFQ67m1Vmc0Ti
 WG4WMnD3yXFjiNZjDDrd
 =f7JV
 -----END PGP SIGNATURE-----

Merge tag 'renesas-r8a7778-ccf-and-multiplatform-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/multiplatform

Pull "Renesas ARM Based SoC r8a7778 CCF and Multiplatform Updates
for v4.1" from Simon Horman:

* Add CCF and them multiplatform support to r8a7778 SoC and its
  bockw board.

* tag 'renesas-r8a7778-ccf-and-multiplatform-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (21 commits)
  ARM: shmobile: r8a7778: enable multiplatform target
  ARM: shmobile: bockw: add sound to DT
  ARM: shmobile: r8a7778: add sound to DT
  ARM: shmobile: bockw: add devices hooked up to i2c0 to DT
  DT: i2c: add trivial binding for OKI ML86V7667 video decoder
  ARM: shmobile: r8a7778: common clock framework CPG driver
  ARM: shmobile: bockw dts: set extal clock frequency
  ARM: shmobile: bockw dts: Move Ethernet node to BSC
  ARM: shmobile: r8a7778 dtsi: Add Bus State Controller node
  ARM: shmobile: bockw: add USB, VIN pin descriptions to DT
  ARM: shmobile: r8a7778: add internal ethernet controller to DT
  ARM: shmobile: r8a7778: add MSTP clock assignments to DT
  ARM: shmobile: r8a7778: implement SoC and board CCF support
  ARM: shmobile: r8a7778: Common clock framework DT description
  ARM: shmobile: r8a7778: add CPG register bits header
  ARM: shmobile: r8a7778: synchronize dts with reference platform
  drivers: bus: Add Simple Power-Managed Bus Driver
  drivers: bus: Add Renesas Bus State Controller (BSC) DT Bindings
  drivers: bus: Add Simple Power-Managed Bus DT Bindings
  drivers: bus: Sort Makefile entries alphabetically
  ...
2015-03-11 21:14:55 +01:00
Arnd Bergmann 30fa7e0e85 Third fixes batch for AT91 on 4.0:
- clock fixes for USB
 - compatible string changes for handling USB IP differences
   (+ needed AHB matrix syscon)
 - fix of a compilation error in PM code
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJVAFaGAAoJEAf03oE53VmQilsH/Aie6f2WmzqtBACUTJKae3Kj
 BLXyewX89rSEDuUEjImJhYdafYDEq/5IeoeRMY/qPdXKrY0KCEhwnVUT5LEH3qy3
 P8yl0UAtZycMnKtP2YhFRAFUY/DozxprcOqTw4IfZ7PHHsQKcn4+qrgG8LcHpvfZ
 d5wv6C+6gi9UBh3B7omOx98ULFDOnST56UhOml9HGsdOgCc7AbsusEG4FzRON7Bc
 4QEJuYxxZPONoeuczpn9qF8SFk9ShO5dHQsjzWkSZjgneBPJK7vujcItR9KWWqw5
 gtjQ19BPNuAYY4MY6/2mc/qOGsA3o17Cn9CvNwaAnlvMLebk4tMAWL8Y9Dmjouc=
 =l68g
 -----END PGP SIGNATURE-----

Merge tag 'at91-fixes3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes

Pull "Third fixes batch for AT91 on 4.0" from Nicolas Ferre:
- clock fixes for USB
- compatible string changes for handling USB IP differences
  (+ needed AHB matrix syscon)
- fix of a compilation error in PM code

* tag 'at91-fixes3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91: pm_slowclock: fix the compilation error
  ARM: at91/dt: fix USB high-speed clock to select UTMI
  ARM: at91/dt: fix at91 udc compatible strings
  ARM: at91/dt: declare matrix node as a syscon device
  ARM: at91/dt: at91sam9261: fix clocks and clock-names in udc definition
2015-03-11 20:46:52 +01:00
Simon Guinot 0c2d652f0b ARM: Kirkwood: add DT description for nas2big
This patch adds the DT description for the LaCie "2Big NAS" (nas2big).
This NAS is an hardware upgrade of the 2Big Network v2.

Chipset and device list:

- CPU Marvell 88F6282 1600Mhz
- SDRAM memory, 256MB DDR3 (2x128MB x8) 533Mhz
- 1 Ethernet Gigabit port (PHY Marvell 88E1518)
- Flash memory, NAND 256MB TSOP48
- I2C EEPROM, 512 bytes (AT24 type)
- PCIe SATA controller JMicron JMB360 (eSATA)
- I2C fan controller GMT G762 (with a separate alarm GPIO)
- 1 USB2 host port
- 1 push button
- 1 power switch
- 2 SATA LEDs (bi-color, blue and red)
- 1 power LED (bi-color, blue and red)
- CPLD for LEDs and start-up management (Altera Max EMP3064)

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-11 18:16:03 +01:00
Nicolas Ferre 3440ef1691 ARM: at91/dt: fix USB high-speed clock to select UTMI
The UTMI clock must be selected by any high-speed USB IP. The logic behind it
needs this particular clock.
So, correct the clock in the device tree files affected.

Reported-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: <stable@vger.kernel.org> #3.18
2015-03-11 15:49:46 +01:00
Boris Brezillon 70a9beaa07 ARM: at91/dt: fix at91 udc compatible strings
The at91rm9200, at91sam9260, at91sam9261 and at91sam9263 SoCs have slightly
different UDC IPs.
Those differences were previously handled with cpu_is_at91xx macro which
are about to be dropped for multi-platform support, thus we need to
change compatible strings.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-11 15:49:46 +01:00
Boris Brezillon ea1c98b336 ARM: at91/dt: declare matrix node as a syscon device
There is no specific driver handling the AHB matrix, this is a simple syscon
device. the matrix is needed by several other drivers including the USB on some
SoCs (at91sam9261 for instance).
Without this definition, the USB will not work on these SoCs.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-11 15:47:02 +01:00
Arnd Bergmann b85b634ebe The i.MX fixes for 4.0:
It includes a couple of i.MX6 dts fixes, which set an input supply to
 vbus regulator.  Without the fixes, the voltage of vbus is incorrect
 after system boots up.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU/8l7AAoJEFBXWFqHsHzOb3sH/1fFkQXzUcAon971XnD3sP55
 zAbUvcowEQ/04xpb3Q5r5KCfeN4UvOCSY6Zed4sevq/TJZidYl8DKu9q4s0rSnfX
 m1GghT3pAixMlyEWdJldmIwTYBXEkaJVrqeNuTB6BqBIsInWW/R+WkuByrPGkaxS
 P5ENbyMVz68S0Cq88lmYzFjRXCCc2vWPZiVKj0DEOnqld1TIpY9hQyZwHmepCydZ
 GKHLApyWP9qyUs/N6Bxwt/2vPoauit2xfDTvCbBk75jO34uSYEo9L9YpwDQorXPW
 f6vj1EkVqW3TljghEm/kSoi1nhU2fNnfUAWClfKQ1UO2yzNLQAWtY+23upR5Qkw=
 =kuEJ
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

Pull "The i.MX fixes for 4.0" from Shawn Guo:

It includes a couple of i.MX6 dts fixes, which set an input supply to
vbus regulator.  Without the fixes, the voltage of vbus is incorrect
after system boots up.

* tag 'imx-fixes-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx6sl-evk: set swbst_reg as vbus's parent reg
  ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg
2015-03-11 15:38:11 +01:00
Arnd Bergmann 0397da78a1 Fixes for various omap variants, mostly minor fixes for various SoCs
with the bigger changes being for the dra7 clocks and hwmod data:
 
 - Fix wl12xx for dm3730-evm
 
 - Fix omap4 prm save and clea
 
 - Fix hwmod clkdm use count
 
 - Fix hwmod data for pcie on dra7
 
 - Fix lockdep for hwmod
 
 - Fix USB on most omap3 boars by enabling it in the defconfig
 
 - Fix the bypass clock source for omap5 and dra7
 
 - Fix the ehrpwm clock for am33xx and am43xx
 
 - Enable AES and SHAM for BeagleBone white
 
 - Use rmii clock for am335x-lxm
 
 - Fix polling intervals for omap5 thermal zones
 
 - Fix slewctrl for am33xx and am43xx
 
 - Fix dra7-evm dcan pinctrl
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU+kTzAAoJEBvUPslcq6VzwIwQAN0eIx/Ay47tarYrhIbC2BAI
 6GpCAk2GUzBdkdzPOhcjDUFEXs764JIi5+q2wRE9MNDpJZxDh2ORv2fmk9KhIIZw
 d08Rv7kEqwg4JKOF0o+hZH5+eOG1Q3wpvN1fmX49XehKcmY8rHec9oDUdk/yhtPy
 a9B4rNRrvtfPXGCPMNs/mZtkdX/af1JYyhdjTOZixCc3IAptu3n88tX2ukw1g1LK
 kK60BTZmEfoD+N3/ZgBU+caJKA9raesq+PhBOcOECIsyXpg8yYwmNlQX119svZaz
 sg7aTd6cFxdhuRmDK21gjP62O2R5EukQs8zJULl9675sy8vA+C9n/pRalqeSudy5
 rmpYXcRUPzFxySIWfJ4mDz90k8SWWRKb1CSl1QK2uyysR899UdkTwlk9A15LiTqw
 sX7ZdyebiE5WdCgLdH+4KMNcF0iGSFRr9jUsP3ouhO8TghnvryQLJw1gWFZgdQwk
 n4jYtl6nSnJBey78yikAFUad94pFyUddGJOAMsUx1qCnrsIk4ug5AcVjbhwDZOvL
 hP7fFaZ/68gEbFELglg0+xYo/9vgON6iVex7o1p4e4dOsE1UCnD9qvT4h1j3mdoj
 yrXN0M9SYRsasKwEwx+LgF4Md04nPGidh4QiCKruZWwBF3rXo8HTuifvejwnjnm1
 OapxrodYFj1K2PlMp+h9
 =C0ct
 -----END PGP SIGNATURE-----

Merge tag 'fixes-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Pull "omap fixes against v4.0-rc2" from Tony Lindgren:

Fixes for various omap variants, mostly minor fixes for various SoCs
with the bigger changes being for the dra7 clocks and hwmod data:

- Fix wl12xx for dm3730-evm

- Fix omap4 prm save and clea

- Fix hwmod clkdm use count

- Fix hwmod data for pcie on dra7

- Fix lockdep for hwmod

- Fix USB on most omap3 boars by enabling it in the defconfig

- Fix the bypass clock source for omap5 and dra7

- Fix the ehrpwm clock for am33xx and am43xx

- Enable AES and SHAM for BeagleBone white

- Use rmii clock for am335x-lxm

- Fix polling intervals for omap5 thermal zones

- Fix slewctrl for am33xx and am43xx

- Fix dra7-evm dcan pinctrl

* tag 'fixes-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Fix wl12xx on dm3730-evm with mainline u-boot
  ARM: OMAP: enable TWL4030_USB in omap2plus_defconfig
  ARM: dts: dra7x-evm: avoid possible contention while muxing on CAN lines
  ARM: dts: dra7x-evm: Don't use dcan1_rx.gpio1_15 in DCAN pinctrl
  ARM: dts: am43xx: fix SLEWCTRL_FAST pinctrl binding
  ARM: dts: am33xx: fix SLEWCTRL_FAST pinctrl binding
  ARM: dts: OMAP5: fix polling intervals for thermal zones
  ARM: dts: am335x-lxm: Use rmii-clock-ext
  ARM: dts: am335x-bone-common: enable aes and sham
  ARM: dts: am43xx-clocks: Fix ehrpwm tbclk data on am43xx
  ARM: dts: am33xx-clocks: Fix ehrpwm tbclk data on am33xx
  ARM: dts: OMAP5: Fix the bypass clock source for dpll_iva and others
  ARM: dts: DRA7x: Fix the bypass clock source for dpll_iva and others
  ARM: OMAP4+: PRM: fix omap4 version of prm_save_and_clear_irqen
  ARM: OMAP2+: hwmod: fix deassert hardreset clkdm usecounting
  ARM: DRA7: hwmod_data: Fix hwmod data for pcie
  ARM: omap2+: omap_hwmod: Set unique lock_class_key per hwmod
2015-03-11 15:35:28 +01:00
Arnd Bergmann e76296580d Second fixes batch for AT91 on 4.0:
- little fix for !MMU debug: may also help for randconfig
 - fix of 2 errors in LCD clock definitions
 - in PM code, not writing the key leads to not execute the action
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJU+DZAAAoJEAf03oE53VmQe34H/3cACqt00PvJiJ/DJNOLq8xM
 1E93vZb/sQ5nD4JwF1DK1/VezT8QjOpIdb/Uo/XIKxqV0T7ZfFcLcAYHDCZup1HP
 VbNtGRYPDGtQypBBVHDgCHwfgH6QVjTQJk67vjZkKmvWXFBnv6akY2XTrXLeMBKw
 24nWEamrpR5tlEG5z9WIx6YFYBslDHq+R8j98AThJRo3NI+d00FPYwfDEwNf730e
 T4xh/Rzz9eNbttBoTP5AeN75OXowsnpZwVicbQNtkX0E2jNdv1Ltbkpzc9zWdw8m
 pL1kf+sV2MvD7KvcOrFGXMD2Ei3MCUNFdscaftQvfjutjEdmF2eIcK4qAzYRifw=
 =UTAc
 -----END PGP SIGNATURE-----

Merge tag 'at91-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes

Pull "Second fixes batch for AT91 on 4.0" from Nicolas Ferre:

- little fix for !MMU debug: may also help for randconfig
- fix of 2 errors in LCD clock definitions
- in PM code, not writing the key leads to not execute the action

* tag 'at91-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/pm: MOR register KEY was missing
  ARM: at91/dt: sama5d4: fix lcdck clock definition
  ARM: at91/dt: sama5d4: rename lcd_clk into lcdc_clk
  ARM: at91: debug: fix non MMU debug
2015-03-11 15:33:41 +01:00
Arnd Bergmann 8c1134080e Fixes for v4.0 on the SoCFPGA platform:
- Fix the SCU virtual mapping
 - Add misssing DMA channels for UART nodes
 - Fix a sporadic SMP error where CPU1 was not seeing its start address
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJU9+UQAAoJEBmUBAuBoyj0RhMP/2LUcyBCEJ7uqhne5XxoHyYs
 eLOxp2OzeFu9tMwoDsGjDzwaBwfdeau+6P70h1NA0IBMYzKLB3S8yEx8m3qH0geI
 JlPyjOix/vBog25iVTTVd739XnG+ZVlHaclg7RMGulKDoQFD4EI4S1BSRG+40f91
 5NXg9utXhn1A9JYAY5J28SMjfg2dNC7U2H6LWEuptV9ViDqMycvnvwzHA1FTHEto
 DW2Phx7nGWCwQXTshsTZe5CwqMr/XSd918v52bUloLor1bl/usvwzJH5XeAoSHG8
 lLvyyANJeFIQESSdMSXe751FZadLVrvn3WAN2Tm7y8U+DS8/08557Zve1yltdJlX
 b93YiegCGuVAeJZawvlX4IHutHfIH+CKPl+A5yHOFCaRQCNsoUh4YRqOjIoG7Rio
 s0trTYAeJAI2iwIN00z1ls/eX3IWWWB5knbayGsWLqwcNx067GpCt6/o9xEY3Reg
 ZZQgiwg1kABqefEqsXlLgVdyissUA+joAj1xan8mCL6AF+G/Vel6JqZw+RLelEg+
 ayDJDcIIp43bMZyl3kaBPROGWwd/udnZbfi9qv4fIyZKp29zch/XQpWs8dg7R68g
 4XqcDNhyQnfZmDuyum/EmhKN5E77UtoeWh3C8N1WVozJOwFxw3FkxLqgr++fAWgz
 U35t4VJkZygKwvpz2l9N
 =pm9Y
 -----END PGP SIGNATURE-----

Merge tag 'socfpga_fixes_for_v4.0' of git://git.rocketboards.org/linux-socfpga-next into fixes

Pull "Fixes for v4.0 on the SoCFPGA platform" from Dinh Nguyen:

- Fix the SCU virtual mapping
- Add misssing DMA channels for UART nodes
- Fix a sporadic SMP error where CPU1 was not seeing its start address

* tag 'socfpga_fixes_for_v4.0' of git://git.rocketboards.org/linux-socfpga-next:
  ARM: socfpga: make sure socfpga_cpu1start_addr is properly flushed
  ARM: socfpga: fix uart DMA binding error
  ARM: socfpga: Correct SCU virtual mapping in socfpga
2015-03-11 15:31:27 +01:00
Peter Chen 2de9dd0391 ARM: imx6sl-evk: set swbst_reg as vbus's parent reg
USB vbus 5V is from PMIC SWBST, so set swbst_reg as vbus's
parent reg, it fixed a bug that the voltage of vbus is incorrect
due to swbst_reg is disabled after boots up.

Cc: stable@vger.kernel.org
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-11 09:21:22 +08:00
Peter Chen 40f737791d ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg
USB vbus 5V is from PMIC SWBST, so set swbst_reg as vbus's
parent reg, it fixed a bug that the voltage of vbus is incorrect
due to swbst_reg is disabled after boots up.

Cc: stable@vger.kernel.org
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-11 09:21:06 +08:00
Geert Uytterhoeven 46dd8a809e ARM: shmobile: lager: Add da9063 PMIC device node for system restart
Add a device node for the da9063 PMIC, with subnodes for rtc and wdt.
Regulator support is not yet included.

This allows the system to be restarted when the watchdog timer times
out, or when a system restart is requested.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:52:21 +09:00
Geert Uytterhoeven ceb7747993 ARM: shmobile: lager dts: Add da9210 regulator interrupt
The da9210 regulator is connected to IRQ2. Reflect this in its device
node, so the driver can use it when it gains interrupt support.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:52:21 +09:00
Geert Uytterhoeven a6b4226645 ARM: shmobile: koelsch: Add da9063 PMIC device node for system restart
Add a device node for the da9063 PMIC, with subnodes for rtc and wdt.
Regulator support is not yet included.

This allows the system to be restarted when the watchdog timer times
out, or when a system restart is requested.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:52:21 +09:00
Geert Uytterhoeven 4be7338df3 ARM: shmobile: koelsch dts: Add da9210 regulator interrupt
The da9210 regulator is connected to IRQ2. Reflect this in its device
node, so the driver can use it when it gains interrupt support.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:52:20 +09:00
Kuninori Morimoto 63573339e7 ARM: shmobile: r8a7791: sound enables Audio DMAC entry on DTSI
This patch adds Audio DMAC (= rcar-dmac) entry for sound

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:40:30 +09:00
Kuninori Morimoto 118a509374 ARM: shmobile: r8a7790: sound enables Audio DMAC entry on DTSI
This patch adds Audio DMAC (= rcar-dmac) entry for sound

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:40:30 +09:00
Kuninori Morimoto d73a5013ed ARM: shmobile: r8a7791: enable Audio DMAC peri peri via sound driver
Audio DMAC peri peri is no longer DMAEngine. it is supported by
sound driver. this patch enable it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:40:30 +09:00
Kuninori Morimoto 0c60267702 ARM: shmobile: r8a7790: enable Audio DMAC peri peri via sound driver
Audio DMAC peri peri is no longer DMAEngine. it is supported by
sound driver. this patch enable it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:40:30 +09:00
Kuninori Morimoto d88a6a2a21 ARM: shmobile: r8a7791: add reg-names for sound
Rensas R-Car sound driver supports reg-names.
Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:40:30 +09:00
Kuninori Morimoto 46a158f2ce ARM: shmobile: r8a7790: add reg-names for sound
Rensas R-Car sound driver supports reg-names.
Let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-11 09:40:30 +09:00
Ray Jui 90c6e608e7 ARM: dts: cygnus: enable GPIO based hook detection
This enables GPIO based phone hook detection for Broadcom BCM911360
phone factor board (bcm911360_entphn)

Signed-off-by: Ray Jui <rjui@broadcom.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-10 09:27:05 -07:00
Ray Jui 5fa4b29c71 ARM: dts: enable GPIO for Broadcom Cygnus
This enables all 3 GPIO controllers including the ASIU GPIO, the
chipcommonG GPIO, and the ALWAYS-ON GPIO, for Broadcom Cygnus SoC

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Dmitry Torokhov <dtor@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-10 09:27:04 -07:00
Ray Jui e6a4e5d50b ARM: dts: enable IOMUX for Broadcom Cygnus
This enables the IOMUX support for Broadcom Cygnus SoC

Signed-off-by: Ray Jui <rjui@broadcom.com>
Tested-by: Dmitry Torokhov <dtor@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-10 09:27:04 -07:00
Boris Brezillon 05d6a08847 ARM: at91/dt: at91sam9261: fix clocks and clock-names in udc definition
Peripheral clock is named pclk and system clock is named hclk (those are
the names expected by the at91_udc driver).

Drop the deprecated usb_clk (formerly used to configure the usb clock rate
which is now directly configurable through hclk).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-09 12:28:09 +01:00
Boris BREZILLON 9c348d45d8 ARM: at91/dt: fix macb compatible strings
Some at91 SoCs embed a 10/100 Mbit Ethernet IP, that is based on the
at91sam9260 SoC.
Fix at91 DTs accordingly.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-07 22:31:21 -05:00
Heiko Stuebner 776920e16a ARM: dts: rockchip: add input supplies for the act8846 on Radxa Rock
On the Radxa Rock board most supplies come from the static 5v vsys supply, but
the inl1-supply comes from the REG4 of the act8846 itself. Model this dependency
using the added supply-handling to make sure the supplying regulator gets handled
correctly and not accidentially turned off.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-03-07 19:39:29 +01:00
Rafał Miłecki 7875b470c9 ARM: BCM5301X: Fix default state of power LEDs on Netgear R6250
We want green LED to be enabled by default.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-06 22:26:48 -08:00
Rafał Miłecki 4076b521cb ARM: BCM5301X: Add DT for Netgear R8000
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reported-by: Ian Kent <raven@themaw.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-06 22:26:48 -08:00
Geert Uytterhoeven 90ca409a1e ARM: shmobile: ape6evm dts: Configure the custom switch as wake-up source
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-07 10:07:30 +09:00
Geert Uytterhoeven a104662052 ARM: shmobile: ape6evm dts: Enable pull-up for GPIO switches
The switches on r8a73a4/ape6evm do not have pull-up registers.  The
schematics say: "Need to use APE6 internal PullUp", hence enable pull-up
using pinctrl.

Without this, the switches don't really work, as the GPIO inputs are
more likely to pick up ghost signals through capacitive coupling than
actual keypresses.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-07 10:07:24 +09:00
Roger Quadros d80d581bf3 ARM: dts: dra7x-evm: avoid possible contention while muxing on CAN lines
DCAN1 RX and TX lines are internally pulled high according to [1].
While muxing between DCAN mode and SAFE mode we make sure
that the same pull direction is set to minimize opposite
pull contention during the switching window.

[1] in DRA7 data manual, Ball characteristics table 4-2, DSIS colum shows
the state driven to the peripheral input while in the deselcted mode.
DSIS - De-Selected Input State.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06 09:22:27 -08:00
Roger Quadros 9b5580854f ARM: dts: dra7x-evm: Don't use dcan1_rx.gpio1_15 in DCAN pinctrl
Rev.F onwards ball G19 (dcan1_rx) is used as a GPIO for some other
function so don't include it in DCAN pinctrl node.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06 09:22:27 -08:00
Tero Kristo 38f5c8ba30 ARM: dts: OMAP5: fix polling intervals for thermal zones
OMAP4 has a finer counter granularity, which allows for a delay of 1000ms
in the thermal zone polling intervals. OMAP5 has a different counter
mechanism, which allows at maximum a 500ms timer. Adjust the cpu thermal
zone polling interval accordingly.

Without this patch, the polling interval information is simply ignored,
and the following thermal warnings are printed during boot (assuming
thermal is enabled);

[    1.545343] ti-soc-thermal 4a0021e0.bandgap: Delay 1000 ms is not supported
[    1.552691] ti-soc-thermal 4a0021e0.bandgap: Delay 1000 ms is not supported
[    1.560029] ti-soc-thermal 4a0021e0.bandgap: Delay 1000 ms is not supported

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06 09:07:17 -08:00
George McCollister 87be4891d8 ARM: dts: am335x-lxm: Use rmii-clock-ext
Use external clock for RMII since the internal clock doesn't meet the
jitter requirements.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06 09:02:41 -08:00
Matt Porter a43b446dcc ARM: dts: am335x-bone-common: enable aes and sham
Beaglebone Black doesn't have AES and SHAM enabled like the
original Beaglebone White dts. This breaks applications that
leverage the crypto blocks so fix this by enabling these nodes
in the am335x-bone-common.dtsi. With this change, enabling the
nodes in am335x-bone.dts is no longer required so remove them.

Signed-off-by: Matt Porter <mporter@konsulko.com>
Acked-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06 08:56:01 -08:00
Vignesh R 7d53d25578 ARM: dts: am43xx-clocks: Fix ehrpwm tbclk data on am43xx
ehrpwm tbclk is wrongly modelled as deriving from dpll_per_m2_ck.
The TRM says tbclk is derived from SYSCLKOUT. SYSCLKOUT nothing but the
functional clock of pwmss (l4ls_gclk).
Fix this by changing source of ehrpwmx_tbclk to l4ls_gclk.

Fixes: 4da1c67719 ("add tbclk data for ehrpwm")
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06 08:52:36 -08:00
Vignesh R 6e22616eba ARM: dts: am33xx-clocks: Fix ehrpwm tbclk data on am33xx
ehrpwm tbclk is wrongly modelled as deriving from dpll_per_m2_ck.
The TRM says tbclk is derived from SYSCLKOUT. SYSCLKOUT nothing but the
functional clock of pwmss (l4ls_gclk).
Fix this by changing source of ehrpwmx_tbclk to l4ls_gclk.

Fixes: 9e100ebafb91: ("Fix ehrpwm tbclk data")
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06 08:51:48 -08:00
Ravikumar Kattekola ac92abcb96 ARM: dts: OMAP5: Fix the bypass clock source for dpll_iva and others
Fixes 85dc74e9 (ARM: dts: omap5 clock data)

On OMAP54xx, For DPLL_IVA, the ref clock(CLKINP) is connected to sys_clk1 and
the bypass input(CLKINPULOW) is connected to iva_dpll_hs_clk_div clock.
But the bypass input is not directly routed to bypass clkout instead
both CLKINP and CLKINPULOW are connected to bypass clkout via a mux.

This mux is controlled by the bit - CM_CLKSEL_DPLL_IVA[23]:DPLL_BYP_CLKSEL
and it's POR value is zero which selects the CLKINP as bypass clkout.
which means iva_dpll_hs_clk_div is not the bypass clock for dpll_iva_ck

Fix this by adding another mux clock as parent in bypass mode.

This design is common to most of the PLLs and the rest have only one bypass
clock. Below is a list of the DPLLs that need this fix:

DPLL_IVA,
DPLL_PER,
DPLL_USB and DPLL_CORE

Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06 08:36:33 -08:00
Ravikumar Kattekola d2192ea098 ARM: dts: DRA7x: Fix the bypass clock source for dpll_iva and others
Fixes: ee6c750761 (ARM: dts: dra7 clock data)

On DRA7x, For DPLL_IVA, the ref clock(CLKINP) is connected to sys_clk1 and
the bypass input(CLKINPULOW) is connected to iva_dpll_hs_clk_div clock.
But the bypass input is not directly routed to bypass clkout instead
both CLKINP and CLKINPULOW are connected to bypass clkout via a mux.

This mux is controlled by the bit - CM_CLKSEL_DPLL_IVA[23]:DPLL_BYP_CLKSEL
and it's POR value is zero which selects the CLKINP as bypass clkout.
which means iva_dpll_hs_clk_div is not the bypass clock for dpll_iva_ck

Fix this by adding another mux clock as parent in bypass mode.

This design is common to most of the PLLs and the rest have only one bypass
clock. Below is a list of the DPLLs that need this fix:

DPLL_IVA, DPLL_DDR,
DPLL_DSP, DPLL_EVE,
DPLL_GMAC, DPLL_PER,
DPLL_USB and DPLL_CORE

Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06 08:34:21 -08:00
Hongzhou Yang e6f219b8ec ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135.
Add pinctrl,GPIO and EINT node to mt8135.dtsi.

Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Singed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-03-06 13:40:09 +01:00
Boris BREZILLON db68e71a0e ARM: at91/dt: sama5d4: fix lcdck clock definition
lcdck takes mck (not smd) as its parent. It is also assigned id 3 and not 4.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
[nicolas.ferre@atmel.com: squashed 2 related patches]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-05 10:58:59 +01:00
Boris BREZILLON b6d7d3f1f3 ARM: at91/dt: sama5d4: rename lcd_clk into lcdc_clk
Rename lcd_clk into lcdc_clk to be consistent with sama5d3 clock
definitions.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-05 10:58:51 +01:00
Daniel Tang 66c9270b68 devicetree: Add TI-NSPIRE USB OTG support to device tree
Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-04 23:44:17 +01:00
Arnd Bergmann 8f4edb9efd Merge tag 'for-v4.0-rc/meson-dts' of https://github.com/carlocaione/linux-meson into next/dt
Pull "meson DTS changes" from Carlo Caione:

- New DTS for MINIX NEO-X8
- Add DTS support for SPIFC, Ethernet controller and pinctrl

* tag 'for-v4.0-rc/meson-dts' of https://github.com/carlocaione/linux-meson:
  ARM: dts: meson: add DTS file for MINIX NEO-X8
  ARM: dts: meson8: add pinctrl node
  ARM: dts: meson: enable Ethernet controller
  ARM: dts: meson: add node for SPIFC
2015-03-04 23:04:31 +01:00
Arnd Bergmann 998b4ca7e4 Renesas ARM Based SoC DT Updates for v4.1
* Increase hardware coverage of DT for various SoCs
 * Add PFC information for emev2 SoC
 * Remap entire APMU region for r8a7791 and r8a7790 SoCs
 * Declare the full 512 MiB of RAM for kzm9g board
 * Add selectable sources to DIV6 clocks to sh73a0 SoC
 * Add missing INTCA0 clock for irqpin module on sh73a0 SoC
 * Set control-parent for all irqpin node on sh73a0 SoC
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU7Xi+AAoJENfPZGlqN0++1+EQALWCe5Lx6gLkVuD9XoZzXNIj
 +UbM7H86+Rfr3/6s80NSESf+wWX17skrX8uwnginVTjYn+I9+PvOFq2EATzyJmSy
 EoeshWRwf4KzxTaeDvbw3qrjqm+DPxfNtcctm6oF9aH68C3K8IkvaJlfiBQxl0T1
 3WHwZu3BSTT9fD+VOokGsqML5s0rEo9kJS6rqaNVuURFPfEtsixzLYQtzHq7nH9T
 SLgkMTVHuiA9uoUWZPWgZihlPZ62NCpBYS4V+NR0D1oZC97rCqYUVYiEPxv9kRqL
 Jlq+1Nm/eR8+ac3QAwtJfABmHIwMEdeUKlCaGGIrQTrk4NLHgkb4VzG+AJfUGCbv
 fXRa1lLJxJybdoDVNTGAk5UGIcXN5agl9JO1hhj3KlQL2JruYBTndLKIpRDvMIvs
 4i5jzUSklFRR1OGbWEaNr0JaBiTnKVT9FBAHSYslPdzuX+gVM2Rwh9+vqChpFCCs
 H3Hcfzxc5qqml268lWzuXe6LKirSXdfkLHoQ1Odv3D5JCgm8qT/R2OTpBwq21kWs
 ANRcd08U/6ie4kvR9CsmAvuFgQWqlKXmJZ9adk7IMPQzvljH3kjzi6ukPYigQcSe
 kRlAzYdZLZlj9TtWwl1badMmbG3wLfnGu4RMsiS/aMaUjXKEvuUbh+bKIuTHaX94
 E4DFVihuwBR3k1PYKscj
 =1m2R
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Renesas ARM Based SoC DT Updates for v4.1" from Simon Horman:

* Increase hardware coverage of DT for various SoCs
* Add PFC information for emev2 SoC
* Remap entire APMU region for r8a7791 and r8a7790 SoCs
* Declare the full 512 MiB of RAM for kzm9g board
* Add selectable sources to DIV6 clocks to sh73a0 SoC
* Add missing INTCA0 clock for irqpin module on sh73a0 SoC
* Set control-parent for all irqpin node on sh73a0 SoC

* tag 'renesas-dt-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (32 commits)
  ARM: shmobile: r8a7794: add SDHI DT support
  ARM: shmobile: r8a7790: add ADSP clocks
  ARM: shmobile: r8a7791: add ADSP clocks
  ARM: shmobile: henninger: add CAN0 DT support
  ARM: shmobile: r8a7791: add CAN DT support
  ARM: shmobile: r8a7791: add CAN clocks
  ARM: shmobile: r8a7790: add CAN DT support
  ARM: shmobile: r8a7790: add CAN clocks
  ARM: shmobile: emev2-kzm9d dts: Add PFC information for uart1
  ARM: shmobile: emev2 dtsi: Add PFC information
  ARM: shmobile: r8a7791: smp: remap whole apmu region
  ARM: shmobile: r8a7790: smp: remap whole apmu region
  ARM: shmobile: koelsch: Add DU HDMI output support
  ARM: shmobile: r8a7791: Correct SDHI clock labels and output-names
  ARM: shmobile: r8a7794: Correct SDHI clock base address, labels and output-names
  ARM: shmobile: r8a7794: alt: Enable ethernet controller
  ARM: shmobile: r8a7794: Add ethernet controller to device tree
  ARM: shmobile: r8a7794: Add IPMMU DT nodes
  ARM: shmobile: r8a7791: Add IPMMU DT nodes
  ARM: shmobile: r8a7790: Add IPMMU DT nodes
  ...
2015-03-04 22:59:23 +01:00
Arnd Bergmann 605e0f904b Renesas ARM Based SoC sh7372 SoC Removal Updates for v4.1
* Remove the sh7372 SoC and its mackerel board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU7rrhAAoJENfPZGlqN0++qYsP/0J9ZuXwSnzyOZt7i9aW8pxT
 zsyKY0n6YKfVQ8QL29lGnUeN5TXqgbtFybElXQwJLmyVE3ZqF/N+sw6ly4gDNeMO
 2MRAjveSd68s3GHLot43FW7KgM8hiNMSwD1weIRdIVOE2Jl1TGZ6tDEUijZtmsRA
 1WM9pCHnhs/9X+ujz1buRYGXLyvah4Lbf5sBXKg/WqmMHbILflGXNscfKsFfZ3Yb
 /KHDYz4T3T+Y/nDuL5j4ct8NjOTyglw2ymXzJXzEtkZrZfql3I076XzxawIvicy0
 huE4oMEMbNOmSB6kwG5bX7to0QqEcVK9CmYVwn92cMmycDATnyZ/tXMcaTgrz4dd
 D0hg5CvCFO1Aql9BLKyG+Gofz4RLaL0LY6UZiFoE4bZ+o1EuCg00oGY2qcf0Ed7X
 MNHOreIb4bmPPu/QaDSIssnlj4cdgl7Q35/sOV9bSv8S2koxLs35SBuAMzsx6d1A
 5S5HJoUJ4TbTHyW9e+laYQVp+Xx140KOBOLY3DmPIMQtl3lB8W1ofCiMdlLe+jpv
 xXVu65EhtrTLQZHgq6zQTHSOargao3r6qBAjlMKwDZhc6bQGodQKocMgYxMrQ/NY
 rV6iLoLMaN8YdwOy6Ac51CsljJ16NDRlwkQvbLaxv7Oh5tDM3ryHHFgFYH7x5Tj6
 n0xLtBWVvbcoVFZNUKE2
 =Lpw8
 -----END PGP SIGNATURE-----

Merge tag 'renesas-sh7372-soc-removal-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/multiplatform

Pull "Renesas ARM Based SoC sh7372 SoC Removal Updates for v4.1" from Simon Horman:

* Remove the sh7372 SoC and its mackerel board

* tag 'renesas-sh7372-soc-removal-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  Documentation: Remove ZBOOT MMC/SDHI utility and docs
  ARM: shmobile: sh7372 dtsi: Remove Legacy DTSI file
  ARM: shmobile: sh7372: Remove DT binding documentation
  ARM: shmobile: sh7372: Remove Legacy C SoC code
  ARM: shmobile: sh7372: Remove ZBOOT MMC/SDHI support
  ARM: shmobile: mackerel: Remove from MAINTAINERS
  ARM: shmobile: mackerel: Remove defconfig
  ARM: shmobile: mackerel: Remove mach-type entry
  ARM: shmobile: mackerel: Remove DT binding documentation
  ARM: shmobile: mackerel dts: Remove Legacy DTS file
  ARM: shmobile: mackerel: Remove Legacy C board code
  ARM: shmobile: mackerel: Remove ZBOOT code

[arnd: The sh7372 platform is rather dated and is believed to
 have no active users on modern kernels. It stands in the way
 of converting all of mach-shmobile to be multiplatform capable,
 as adding pinctrl and common-clock support for it would be more
 work than it's  worth. As always, should any legitimate upstream
 users show up in the future, we will revert this removal]
2015-03-04 22:56:06 +01:00
Arnd Bergmann bc76161686 First fixes batch for AT91 on 4.0:
- PM slowclock fixes for DDR and timeouts
 - fix some DT entries
 - little defconfig updates
 - the removal of a harmful watchdog option + its detailed documentation
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJU9uKaAAoJEAf03oE53VmQrT4IAID5RZZLycH65MfI2SWs5jHJ
 riXpp2ByX2YMZhBV7Y+jSJcdty0zdZFXAm3cME8YtHSHFNW87y3U90BhL1JTwFh8
 Rlk45xxauRmiH5R+0haBIavt+ZFHB8QOgmAE+xa4Vc/qBiry6HSgWVldk3yiai5j
 Mnq/+UpeL7mSlcn9kFkbVVOkDiP2tRoITU0z780tBgywbUQEluNZan4MfjSaknzP
 GEwmN74Z6QPUxhqc1Z1ACU84ozYcLYaiMksNXrTch0+dLz91MIRl6Eqb53XhJEK3
 P8ysCj16UBgX2JuuYWBGkxrZ1Brl0Lj5075JrM+He0T/XRsLTChb+9rQ14QrKno=
 =YpBm
 -----END PGP SIGNATURE-----

Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes

Merge "First fixes batch for AT91 on 4.0" from Nicolas Ferre:

- PM slowclock fixes for DDR and timeouts
- fix some DT entries
- little defconfig updates
- the removal of a harmful watchdog option + its detailed documentation

* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: keep watchdog running in idle mode
  dts: Documentation: AT91 Watchdog, explain what atmel,idle-halt property really do
  ARM: at91/defconfig: add at91rm9200 ethernet support
  ARM: at91/defconfig: remove CONFIG_SYSFS_DEPRECATED
  ARM: at91/dt: at91sam9260: fix usart pinctrl
  ARM: at91/dt: sama5d4: add missing alias for i2c0
  ARM: at91/dt: at91sam9263: Fixup sram1 device tree node
  ARM: at91: pm: fix SRAM allocation
  ARM: at91: pm: fix at91rm9200 standby
  pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.
  pm: at91: pm_slowclock: fix suspend/resume hang up in timeouts
2015-03-04 21:14:47 +01:00
Arnd Bergmann 3c02bfc4c0 Samsung tmu and hdmi regression fixes for v4.0
- The thermal management unit and HDMI (drm mixer driver) related
 reworks have been merged in v4.0 merge window. So if this DT changes
 are missed for v4.0, we regressions in v4.0 release for exynos
 platforms such as exynos5250, exynos5420, exynos4 SoCs.
 
 - Note since there was a dependency with driver side, this cannot
 be sent to upstream during preivous merge window and now it has been
 resolved.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJU9LGEAAoJEA0Cl+kVi2xqXHYP/jyUQoCEEtgBrm9Rui0JgeJ5
 AxknhqAQQNNSL5npsGGkrmYNsZraIwn5rfALCbXAt0xfq+pACiqYLna81J2j33dF
 fk5t2MzmoHFKrDxeR7uQOgGd6QU9q4nRUL0Cttp7G38BBCJkH/cj6nu8RxVpl2b3
 walBlRmgt8AKzFNCeOaNxpp0dmOj1RSU8xLwR4bvo3qWPSNI9LrqkCfSz1/gZLOQ
 J6e9U6+GmOPiui6aEpI+9CQ78amrMUE0QwgI5YJwVNWT0Vx0kG8SWV0DRGPz8UJv
 aFrizdSdqHZWVaMez+yv7sM5ga+KHqseWX29lVgcJHXj3tlMpsP0RH3Vvq2jDkfG
 AEbcsTbm6Jd9kbq9/Edr/TDIu97SLmQhLM7wm1EBhi70CuglPeLWydB23sXL3wCc
 5V1sPIEiLx0epcfP6JIHHExKS2amBR7RHbn5E+mWjs9ChKCDNyG/6cu7eWzFGrFm
 LW4MHwU4dW9WHOzMBUDPnMrDhpJYe+9XLBgzeD67xda2YE80BAb2Ro/LO/pwEv5y
 spuFqDlXnahOs4wP68f+TDHyhPg81QbkC+35w+mNXFYEgUQbROm4PgHEK4jRbB5K
 zAZHIReEwYqxne5Suv6uSAUiiBmaa3aujnj56bhwHns6KDYnVmCdbw6h0CymAtSA
 Inie5Ipbq5XAtatLVWA+
 =gbWq
 -----END PGP SIGNATURE-----

Merge tag 'samsung-fixes-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes

Merge "Samsung tmu and hdmi regression fixes for v4.0" from Kukjin Kim:

- The thermal management unit and HDMI (drm mixer driver) related
reworks have been merged in v4.0 merge window. So if this DT changes
are missed for v4.0, we regressions in v4.0 release for exynos
platforms such as exynos5250, exynos5420, exynos4 SoCs.

- Note since there was a dependency with driver side, this cannot
be sent to upstream during preivous merge window and now it has been
resolved.

* tag 'samsung-fixes-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: add display power domain for exynos5250
  ARM: dts: add 'hdmi' clock to mixer nodes for exynos5250 and exynos5420
  ARM: dts: enable hdmi support for exynos4210-universal_c210
  ARM: dts: enable hdmi support for exynos4412-odroid-common
  ARM: dts: add dependency between TV and LCD0 power domains for exynos4
  ARM: dts: add hdmi related nodes for exynos4 SoCs
  ARM: EXYNOS: add support for sub-power domains
  dt-bindings: document a note about power domain subdomains
  ARM: dts: Provide dt bindings identical for Exynos TMU
  ARM: dts: Trip points and sensor configuration data for exynos5440
  ARM: dts: define default thermal-zones for exynos4
  ARM: dts: default trip points definition for exynos5420
  ARM: dts: add TMU default definitions for exynos4412
  ARM: dts: Adding CPU cooling binding for Exynos SoCs
  ARM: dts: Enable TMU for exynos4412-odriod-common
  ARM: dts: Add LDO10 for TMU for exynos4412-odroid-common
  ARM: dts: Enable TMU for exynos4210-trats
2015-03-04 20:59:03 +01:00
Andy Yan c38e1328ce ARM: dts: add rk3288 PopMetal board
PopMetal is a rockchip rk3288 based board made by ChipSpark,
which has many interface such as VGA,HDMI,usb,ir,sdcad and lots of
sensors such as gyroscope(L3G4200D),accelerometer(mma8452),
compass(AK8963C).

This patch add a basic support for this board, which make the board
boot into a initramfs shell with sdcard,hdmi and all sensors enabled

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-03-04 20:54:42 +01:00
Steffen Trumtrar 78c03c7af8 ARM: socfpga: fix uart DMA binding error
socfpga.dtsi is missing the DMA channels for the uart nodes.
This will produce the following errors:

	of_dma_request_slave_channel: dma-names property of node '/soc/serial0@ffc02000' missing or empty
	ttyS0 - failed to request DMA

Provide the correct DMA channels to fix this.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-03-04 13:03:04 -06:00
Josh Wu 35762a624f ARM: at91/dt: sama5d4: add ISI dt support
Add ISI dt node and pinctrl settings in sama5d4.dtsi.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
[nicolas.ferre@atmel.com: sort nodes in order. remove useless comments]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:17 +01:00
Bo Shen 0a5c5f84a5 ARM: at91/dt: sama5d4: add pwm0 device node
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:16 +01:00
Leilei Zhao 83906783b7 ARM: at91/dt: sama5d4: add aes, sha and tdes nodes
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:16 +01:00
Bo Shen 15ff964dd4 ARM: at91: dt: sama5d4ek: enable audio
Enable audio support for sama5d4ek board.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:15 +01:00
Bo Shen 5afd9451cf ARM: at91: dt: sama5d4ek: add and enable wm8904
Add wm8904 codec node and enable it.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:15 +01:00
Bo Shen 06981c51f8 ARM: at91: dt: sama5d4ek: enable ssc0
Enable SSC0 node, which will be used for audio.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:14 +01:00
Bo Shen 0697edd7b7 ARM: at91: dt: sama5d4: add ssc nodes
Add SSC 0 and 1 nodes.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:14 +01:00
Nicolas Ferre df99d08ccd ARM: at91/dt: sama5d4 xplained: add i2c0
Add i2c0 aka twi0 on sama5d4 xplained board.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:13 +01:00
Josh Wu 38153a0178 ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board
Add at91 sama5d4 xplained board support.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:13 +01:00
Josh Wu 9917defd8c ARM: at91/dt: sama5d4: add #{address, size}_cells properties for macb0
macb0 DT node can have phy child nodes, so add the #{address,
size}_cells for macb0 node.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:12 +01:00
Josh Wu 1bc5465276 ARM: at91/dt: sama5d4ek: add leds in DT node
Add the leds DT node in the dts file.
In the leds, d10 is set as heartbeat led.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:12 +01:00
Philip Attfield 4cc7cdf35c ARM: at91/dt: add i2c1 declaration to sama5d4
Add alias, node declaration and pinctrl for i2c1 (aka: twi1).

Signed-off-by: Philip Attfield <phil.attfield@seqlabs.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:11 +01:00
Nicolas Ferre 4f74a4a642 ARM: at91/dt: gpio-keys: address-cells and size-cells properties are not needed
Gpio-keys nodes are not using the "reg" property in their sub nodes.
So, there is no need to define #address-cells and #size-cells properties
in gpio-keys nodes: we remove them in these new boards.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:11 +01:00
Wenyou Yang 6d39bb019f ARM: at91/dt: at91-sama5d3_xplained: add gpio-key pinctrl property
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:10 +01:00
Nicolas Ferre 8dafaa1f28 ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals
File name had at91 prefix, which is not the case anymore for SAMA5D3.
AT91SAM9x5 was mentioned instead of SAMA5D3 SoC.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:10 +01:00
Bo Shen cf05ea7131 ARM: at91/dt: at91sam9n12ek: enable udp
Enable usb device port on at91sam9n12ek board.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:09 +01:00
Bo Shen 13f7ad3dc6 ARM: at91/dt: at91sam9n12: add udp device node
Add usb device node for at91sam9n12.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:09 +01:00
Josh Wu 3978d6b05f ARM: at91: at91sam9g25ek/dts: enable ISI and ov2640
Enable ISI and ov2640 for at91sam9g25ek board.
Meantime, we need to disable the mmc1 and spi0 as they have pin conflict
with ISI.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:08 +01:00
Josh Wu 436ea603c3 ARM: at91: at91sam9x5ek/dts: add ov2640 support
Add the camera sensor ov2640 dt support. And connect sensor to isi node
as well.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:08 +01:00
Josh Wu 7f9acb1093 ARM: at91: at91sam9x5/dts: add ISI dt support, include isi node, pinctrls
Add a new file: at91sam9x5_isi.dtsi, which includes ISI node and
pinctrls.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 18:36:07 +01:00
Thomas Petazzoni 538da83ddb ARM: mvebu: add Device Tree files for Armada 39x SoC and board
This commit adds the Device Tree files for the Armada 39x family of
processors, as well as one Armada 398 Development Board.

Like for other Marvell EBU families, a common armada-39x.dtsi contains
the description of the common features of all Armada 39x SoCs, while
armada-390.dtsi and armada-398.dtsi respectively describe the
specificities of those SoCs.

Finally, an armada-398-db.dts file is added to describe the Armada 398
Development Board itself.

So far, the following features are supported:

 * SMP: dual Cortex-A9
 * Basic ARM IPs: SCU, timer, GIC, L2 cache
 * Basic Marvell IPs: pin-muxing, clocks, system controller, MBus
   controller, MPIC interrupt controller, timer, CPU reset for SMP,
   PMSU.
 * I2C
 * SPI
 * SDHCI
 * XOR
 * NAND
 * UART
 * PCIe

Additional features will be supported in the future.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04 15:42:34 +01:00
Thomas Petazzoni 24c2573bdb ARM: mvebu: fix unit address of MPIC nodes
The Device Tree nodes describing the MPIC nodes on Armada 370, 375,
38x and XP had a unit address that did not match the first reg
property, as suggested by the ePAPR. This commit fixes that.

[gregory.clement@free-electrons.com: removed the armada-38x part, as it
was already applied by a previous patch]

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04 15:09:27 +01:00
Thomas Petazzoni 9552203cb0 ARM: mvebu: use stdout-path in all armada-*.dts
This commit adds the stdout-path property in /chosen for all Armada
boards that were not yet carrying this property, and gets rid of
/chosen/bootargs which becomes unneeded: earlyprintk should not be
used by default, and the console= parameter is replaced by the
/chosen/stdout-path property.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04 15:02:28 +01:00
Thomas Petazzoni bf6acf1657 ARM: mvebu: add serial port aliases on Armada 370/375/38x/XP
This commit adds 'serialX' aliases for the various serial ports on
Armada 370, 375, 38x and XP platforms. It will allow the usage of the
stdout-path property.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04 15:02:26 +01:00
Thomas Petazzoni 9574b2fb1c ARM: mvebu: remove aliases for Ethernet devices on Armada 370/375/38x/XP
Having aliases for Ethernet devices is useless, since the networking
subsystem unfortunately doesn't care about aliases to name network
interfaces.

Note that the 'aliases' nodes in armada-370-xp.dtsi and armada-xp.dtsi
become empty, but that we keep it as is since a followup patch will
re-add some aliases to it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04 15:02:24 +01:00
Thomas Petazzoni 43e58e90f8 ARM: mvebu: add UART labels to Armada 375
This commit adds the standard uart0 and uart1 DT labels to the Device
Tree description of the Marvell Armada 375 SoC.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04 15:02:21 +01:00
Thomas Petazzoni 8a48dccb83 ARM: mvebu: add missing UART labels on Armada 38x
The Armada 38x had a label for UART0, but not UART1. This commit fixes
that.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04 15:02:17 +01:00
Thomas Petazzoni a165c3b63b ARM: mvebu: fix usb@ unit address on Armada 38x to match register address
On Marvell Armada 38x, the USB2 controller registers are at 0x58000,
so the corresponding Device Tree node should have a unit address of
58000, and not 50000. We were using 50000 due to an incorrect
copy/pastebin of Armada 370/XP code.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04 15:02:04 +01:00
Maxime Ripard 2a2dbd8b41 ARM: mvebu: a385-db-ap: Enable the NAND
The Armada 385 Access Point Development Board has a 1GB NAND SLC chip from
Micron as its main storage. Enable it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04 14:32:19 +01:00
Andrew Lunn 924361249d ARM: ARMADA XP: WRT1900AC: Add support for the Ethernet switch
Add a DSA section to the DT blob representing the Ethernet switch.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04 14:32:13 +01:00
Simon Guinot ef34481712 ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2
On the LaCie 2Big Network v2 (net2big_v2) board, the fan alarm is not
wired to the I2C fan controller but to a separe GPIO. This GPIO can be
controlled by using the gpio-fan driver.

This patch adds the gpio-fan alarm description in the net2big_v2 DTS.

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04 14:31:34 +01:00
Maxime Ripard 1d7b083994 ARM: mvebu: Fix MPIC unit address
The unit-address is supposed to be equal the first reg address, which is not
the case for the MPIC, that uses the mbus-controller one. Fix this.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04 14:31:28 +01:00
Sebastian Hesselbarth 1a1b9d2571 ARM: dts: dove: Add some more common pinctrl settings
This add common pinctrl settings for pcie[01]_clkreq, spi1, i2c[23],
and internal i2c mux. These settings have either one or two options
only, so put them into the SoC dtsi instead of repeating them on
board level.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-03-04 14:31:17 +01:00
Michel Marti 2141102e04 ARM: at91/dt: keep watchdog running in idle mode
Since turning on idle-halt in commit fe46aa679f (ARM: at91/dt: add
sam9 watchdog default options to SoCs), SoCs compatible with at91sam9260-wdt
no longer reboot if the watchdog times out while the CPU is in idle state.
Removing the 'idle-halt' flag that was set by default fixes this.

Signed-off-by: Michel Marti <mma@objectxp.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
[nicolas.ferre@atmel.com: rework the commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 11:20:52 +01:00
Jonas Andersson a009d69208 ARM: at91/dt: at91sam9260: fix usart pinctrl
Corrected pins used by usart3.

Signed-off-by: Jonas Andersson <jonas@microbit.se>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04 10:31:06 +01:00
Nicolas Ferre a547f60ac8 ARM: at91/dt: sama5d4: add missing alias for i2c0
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03 20:07:15 +01:00
Alexander Stein 940e766a8e ARM: at91/dt: at91sam9263: Fixup sram1 device tree node
Commit ff04660e48b20 ("ARM: at91/dt: add SRAM nodes") used the same base
address for sram0 and sram1 leading to the following warning:
WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x50/0x70()
sysfs: cannot create duplicate filename '/devices/platform/300000.sram'
Fix the base address for sram1.

Signed-off-by: Alexander Stein <alexanders83@web.de>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03 20:07:14 +01:00
Jonathan Richardson 96c110aaa7 ARM: dts: Enable Broadcom Cygnus BCM958305K
DT file to enable the Wireless Audio reference design based on the
BCM58305.

Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-03-02 15:42:17 -08:00
Beniamino Galvani b3e67c9112 ARM: dts: meson: add DTS file for MINIX NEO-X8
Add a DTS file for MINIX NEO-X8, a Meson8-based digital media player.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
2015-03-02 11:01:03 +01:00
Beniamino Galvani d9fea88c4f ARM: dts: meson8: add pinctrl node
Add pinctrl node to the DTSI file for meson8 and sub-nodes for some
standard mux configurations.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
2015-03-02 11:00:59 +01:00
Beniamino Galvani 2345d50583 ARM: dts: meson: enable Ethernet controller
Add a node for the Ethernet controller to Meson DTS file and
enable it on the Geniatech ATV1200 board.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
2015-03-02 11:00:55 +01:00
Beniamino Galvani 03bb95124e ARM: dts: meson: add node for SPIFC
This adds a node for the SPI Flash Controller to the Amlogic Meson
DTS.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Acked-by: Mark Brown <broonie@kernel.org>
2015-03-02 11:00:49 +01:00
Ryo Kataoka 75a499a651 ARM: shmobile: r8a7791: Fix IPMMU-GP clock to device tree
Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-01 11:15:58 +09:00
Laurent Pinchart 1fc5801587 ARM: shmobile: r8a7794: alt: Fix ethernet controller PHY IRQ line
The PHY IRQ line is connected to external IRQ8, not IRQ0. Fix DT
accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-01 11:14:51 +09:00
Ulrich Hecht 3915d36fab ARM: shmobile: r8a7778: enable multiplatform target
Adds config option and enables DTB building.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-01 11:04:44 +09:00
Ulrich Hecht ba32449535 ARM: shmobile: bockw: add sound to DT
Adds sound card using the ak4643 codec.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-01 11:04:44 +09:00
Ulrich Hecht 39a96792c5 ARM: shmobile: r8a7778: add sound to DT
Adds an entry for an R-Car Gen. 1 sound controller.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
[horms: Removed undocumented "renesas,rcar_sound" compat string]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-01 11:03:31 +09:00
Laurent Pinchart 26c00ab4aa ARM: shmobile: lager: Add DU external pixel clocks to DT
Declare the fixed 148.5MHz pixel clocks connected to the DU clock
inputs.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-27 10:00:17 +09:00
Laurent Pinchart cd21cb46e1 ARM: shmobile: koelsch: Add DU external pixel clocks to DT
Declare the fixed 148.5MHz pixel clocks connected to the DU clock
inputs.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-27 10:00:14 +09:00
Laurent Pinchart 665d79aa47 ARM: shmobile: marzen: Add DU external pixel clock to DT
Declare the fixed 65MHz pixel clock connected to the DU clock input.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-27 10:00:10 +09:00
Geert Uytterhoeven ca50ee8f6f ARM: shmobile: ape6evm dts: Fix polarity of LEDs
While the LEDs on r8a73a4/ape6evm are tied to VSUPPLY, they're driven by
an N-channel MOSFET. Hence the GPIO signal should be active high.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-27 09:54:17 +09:00
Ulrich Hecht 95e7381b1a ARM: shmobile: bockw: add devices hooked up to i2c0 to DT
Cameras, RTC, and ak4643 sound codec.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-27 09:49:26 +09:00
Ulrich Hecht a5dc23f689 ARM: shmobile: bockw dts: set extal clock frequency
Sets the extal clock to the frequency of the oscillator installed by
default (33 MHz).

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-27 09:49:24 +09:00
Ulrich Hecht 7d316faa19 ARM: shmobile: bockw dts: Move Ethernet node to BSC
Move the Ethernet node to the new BSC node, as its connected to the
Bus State Controller.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
[horms: dropped compat string changes as they seem out of scope]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-27 09:48:50 +09:00
Tushar Behera 2fad972d45 ARM: dts: Add mclk entry for Peach boards
On Peach Pit and Pi boards, the Exynos SoC XCLKOUT pin provides
master clock (mclk) to the codec. So make it a clock consumer.

Signed-off-by: Tushar Behera <tushar.b@samsung.com>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 06:08:52 +09:00
Javier Martinez Canillas 3cb18180e8 ARM: dts: Add WiFi module support for Peach boards
Peach Pit and Pi boards have a WiFi module that is always powered
but needs toggling an enable pin and ungating a 32kHz reference
clock as part of their power sequencing.

Add a dev node for the SDIO slot and a MMC power sequence provider.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 06:08:51 +09:00
Javier Martinez Canillas af6ad88acb ARM: dts: Mux XMMCnDATA[0] pad correctly for Exynos5420 boards
The Exynos5420 SoC has 3 sets of 8 pads used as data lines for the 3
MMC/SD/SDIO slots. These needs to be muxed as SD_n_DATA instead of a
GPIO or external interrupt to allow the MMC controller to communicate
with the attached cards or SDIO devices.

Which data lines needs to be muxed as SD_n_DATA depends on the bus
width used for data transfer:

* bus-width = <1> needs SD_n_DATA[0]
* bus-width = <4> needs SD_n_DATA[0-3]
* bus-width = <8> needs SD_n_DATA[0-7]

The Exynos5250-pinctrl.dtsi file that defines the groups of pins has
SD_n_DATA[0] muxed for both sdn_bus1 and sdn_bus4 so just one of them
needs to be included in the device node's pinctrl property.

But Exynos5420-pinctrl has a different definition and only includes
SD_n_DATA[1-3] for sdn_bus4. So for a bus-width = <4>, both sdn_bus1
and sdn_bus4 have to be in the dev pinctrl to mux all the needed pads.

It seems all Exynos5420 boards had just cargo cult the pinctrl lines
assuming that sdn_bus4 also included SD_n_DATA[0] and it only works
because the bootloader muxes the pads correctly. But that is not the
case for the devices not used by the bootloader such as WiFi modules.

Add sdn_bus1 too in the nodes pinctrl to not rely on the bootloader.

Suggested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 06:08:51 +09:00
Andrzej Hajda 2d2c9a8d0a ARM: dts: add display power domain for exynos5250
The patch adds domain definition and references to it in appropriate devices.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
[mszyprow: rebased onto generic power domains dt bindings]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:29:32 +09:00
Marek Szyprowski c950ea6807 ARM: dts: add 'hdmi' clock to mixer nodes for exynos5250 and exynos5420
Mixed block needs to control hdmi clock to properly perform power on/off
operation, so add 'hdmi' clock also to mixer nodes.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:29:30 +09:00
Tomasz Stanislawski 7daa0be165 ARM: dts: enable hdmi support for exynos4210-universal_c210
This patch adds configuration of hw modules required to enable HDMI
support on Universal C210 board.

Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:29:30 +09:00
Marek Szyprowski 2561658b9c ARM: dts: enable hdmi support for exynos4412-odroid-common
This patch adds nodes specific to Exynos4412 based Odroid X/X2/U2/U3
boards required for enabling HDMI display.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:29:30 +09:00
Marek Szyprowski ec459c0c77 ARM: dts: add dependency between TV and LCD0 power domains for exynos4
TV Mixer needs both TV and LCD0 domains enabled to be fully operational.
This dependency is modelled by making TV power domains a sub-domain of
LCD0 power domain.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:27:28 +09:00
Marek Szyprowski ed80d4cab7 ARM: dts: add hdmi related nodes for exynos4 SoCs
This patch adds entries for HDMI, Mixer and i2c with hdmi-phy modules
found in Exynos 4210 and 4x12 SoCs.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:27:28 +09:00
Lukasz Majewski 9843a22360 ARM: dts: Provide dt bindings identical for Exynos TMU
Presented device tree bindings provide data already hardcoded in the
exynos_tmu_data.c file.
After this commit, it should be possible to reuse common thermal core
framework in Exynos SoCs.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:24:54 +09:00
Lukasz Majewski 6562504dfe ARM: dts: Trip points and sensor configuration data for exynos5440
This commit provides information about Exynos5440 device configuration.
Previously this information was available in exynos_tmu_data.c file.
Now it is available in the device tree.
Such approach allows reusing some common code for thermal.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:22:58 +09:00
Lukasz Majewski 328829a6ad ARM: dts: define default thermal-zones for exynos4
Trip points corresponding to the one defined in the exynos_tmu_data.c
for Exynos4 have been included.
This thermal-zones attribute is afterwards reused for Exynos4210,
Exynos4412 and Exynos5250.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:22:58 +09:00
Lukasz Majewski b350de6fa9 ARM: dts: default trip points definition for exynos5420
This code groups in one place default settings of trip points.
It is used in SoCs with multiple instances of TMU sensor.

Separate device tree file prevents from multiple copying of the
same data.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:22:56 +09:00
Lukasz Majewski 09a1247a89 ARM: dts: add TMU default definitions for exynos4412
Exynos 4 and 5 family of SoCs uses almost identical TMU sensor to
measure the on chip temperature. For this reason it is possible to
group TMU configuration parameters in one dts file.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:22:56 +09:00
Lukasz Majewski bf4a0bed36 ARM: dts: Adding CPU cooling binding for Exynos SoCs
Presented patch aims to move data necessary for correct CPU cooling device
configuration from exynos_tmu_data.c to device tree.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:22:56 +09:00
Lukasz Majewski 233e274ac7 ARM: dts: Enable TMU for exynos4412-odriod-common
This commit enables TMU IP block on the Exynos4412 Odroid based
devices such as Odroid U3.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:22:55 +09:00
Lukasz Majewski a59acc17a8 ARM: dts: Add LDO10 for TMU for exynos4412-odroid-common
This patch adds LDO10 regulator node for TMU.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:22:55 +09:00
Lukasz Majewski 907c10fcc5 ARM: dts: Enable TMU for exynos4210-trats
The thermal IP block (Thermal Management Unit) called TMU has been
enabled in this device.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:22:55 +09:00
Sebastian Hesselbarth 83ce82eeff ARM: dts: dove: Add node labels for PCIe ports 0 and 1
Add pcie[01] node labels to allow to reference them easily from
board level.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-02-26 20:45:57 +01:00
Sebastian Hesselbarth eb472c4cdd ARM: dts: dove: Always include gpio and interrupt-controller headers
We want to enforce the use of named flags in GPIO and interrupt
specifiers, include the corresponding headers to Dove's SoC dtsi.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-02-26 20:45:57 +01:00
Sebastian Hesselbarth a74cd13b80 ARM: dts: dove: Fix uart[23] reg property
Fix Dove's register addresses of uart2 and uart3 nodes that seem to
be broken since ages due to a copy-and-paste error.

Cc: <stable@vger.kernel.org> # 3.7+
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-02-26 20:45:57 +01:00
Imre Kaloz 4824140f4b ARM: mvebu: add Linksys WRT1900AC (Mamba) support
The Linksys WRT1900AC (Mamba) is a router that has

- 2 mini-PCIe slots with Marvell 88W8864 radios
- 1 USB 3.0 port
- 1 USB 2.0/eSATAp port
- 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN)
- 128MB NAND flash
- 256MB RAM

gregory.clement@free-electrons.com: - add ARM to the title
	- fix the reference to CONFIG_DEBUG_MVEBU_UART0_ALTERNATE
	- fix the unbalanced comment for the syscfg partition

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-02-26 20:45:44 +01:00
Marek Szyprowski 1056a273ec ARM: dts: add eMMC reset line for exynos5422-odroidxu3
This patch adds reset-gpios property to the eMMC slot, so the MMC driver
is able to properly reset eMMC card on system restart and thus fixes
system hang on software reboot.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 04:44:55 +09:00
Marek Szyprowski 225da7e65a ARM: dts: add eMMC reset line for exynos4412-odroid-common
This patch adds reset-gpios property to the eMMC slot, so the MMC driver
is able to properly reset eMMC card on system restart and thus fixes
system hang on software reboot.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 04:44:55 +09:00
Ajay Kumar e07eb1ec8d ARM: dts: represent bridge and panel connection for exynos5420-peach-pit
Define videoports and use endpoints to describe the connection between
the encoder, bridge and the panel, instead of using phandles.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 04:44:53 +09:00
Ajay Kumar b174e79ef5 ARM: dts: represent bridge and panel connection for exynos5250-snow
Define videoports and use endpoints to describe the connection between
the encoder, bridge and the panel, instead of using phandles.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 04:44:53 +09:00
Javier Martinez Canillas d0cf8bc729 ARM: dts: Add cap-sdio-irq to wifi mmc node for exynos5250-snow
Enabling SDIO IRQ signalling for the wifi MMC/SDIO slot
doubles the transmission transfer rate.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 04:44:53 +09:00
Javier Martinez Canillas b07a27696b ARM: dts: Enable wifi power-on for exynos5250-snow
The Snow board has a MMC/SDIO wifi chip that is always powered but it
needs a power sequence involving a reset (active low) and an enable
(active high) pins. Both pins are marked as active low since the MMC
simple power sequence driver asserts the pins prior to the card power
up procedure and de-asserts the pins after the card has been powered.

So the reset line will be left de-asserted and the enable pin will be
left asserted.

The chip also needs an external 32kHz reference clock to be operational
that is by the MAX77686 PMIC clock.

Add a simple MMC power sequence provider for the wifi MMC/SDIO slot.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 04:44:53 +09:00
Laurent Pinchart fd25cdd15b ARM: shmobile: lager: Add DU HDMI output support
Add DT nodes for the ADV7511 HDMI encoder and its HDMI output connector.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-26 10:05:49 +09:00
Kazuya Mizuguchi 118e4e6a71 ARM: shmobile: r8a7791: Fix HSUSB clock to hp_clk from mp_clk
HSUSB uses hp_clk rather than mp_clk for H/W register access.

Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
[horms: updated changelog]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-25 16:16:56 +09:00
Kazuya Mizuguchi b621f6d458 ARM: shmobile: r8a7790: Fix HSUSB clock to hp_clk from mp_clk
HSUSB uses hp_clk rather than mp_clk for H/W register access.

Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
[horms: updated changelog]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-25 16:16:47 +09:00
Kuninori Morimoto e849b0650d ARM: shmobile: r8a7791: tidyup SDHI register size on DTSI
r8a7791 SDHI ch0/ch1 has SD_DMACR which is located in 0x324.
This patch updates register size

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-25 16:16:29 +09:00
Kuninori Morimoto 66f47ed0e8 ARM: shmobile: r8a7790: tidyup SDHI register size on DTSI
r8a7790 SDHI ch0/ch1 has SD_DMACR which is located in 0x324.
This patch updates register size

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-25 16:16:08 +09:00
Laurent Pinchart ae67fa2f8b ARM: shmobile: r8a7791: Reference DMA channels in SDHI DT nodes
Add references to the transmit and receive DMA channels in the three
SDHI nodes.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-25 16:15:06 +09:00
Laurent Pinchart 941fe36b40 ARM: shmobile: r8a7790: Reference DMA channels in SDHI DT nodes
Add references to the transmit and receive DMA channels in the four
SDHI nodes.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-25 16:14:52 +09:00
Geert Uytterhoeven 7b9ad9a0ab ARM: shmobile: r8a73a4 dtsi: Add PM domain support
Add a device node for the System Controller, with subnodes that
represent the hardware power area hierarchy.
Hook up all devices to their respective PM domains.

Add a minimal device node for the Coresight-ETM hardware block, and
hook it up to the D4 PM domain, so the R-Mobile System Controller
driver can keep the domain powered, until the new Coresight code
handles runtime PM.

The System Controller is also used by the R-Mobile Reset driver, which
can now restart the system.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-25 16:02:22 +09:00
Robert Nelson 67fd14b3ec ARM: dts: am335x-bone*: usb0 is hardwired for peripheral
Fixes: http://bugs.elinux.org/issues/127

the bb.org community was seeing random reboots before this change.

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 10:35:44 -08:00
Roger Quadros addfcde7c4 ARM: dts: dra7x-evm: beagle-x15: Fix USB Host
In commit 87517d26d8 ("ARM: dts: dra7-evm: Add extcon nodes for USB")
we enabled Extcon USB gpio to tackle the USB ID pin and get
peripheral mode to work.

But the extcon-gpio-usb driver [1] didn't make it into v4.0
and this makes the USB driver defer probe indefinitely breaking
USB Host functionality.

As a temporary fix we remove the extcon handle from the
USB controller and add it back when the extcon driver
merges in v4.1.

[1] - https://lkml.org/lkml/2015/2/2/187

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 10:35:43 -08:00
Peter Ujfalusi 08d9b327e6 ARM: dts: dra7: Correct the dma controller's property names
According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 10:35:43 -08:00
Peter Ujfalusi 951c1c04c6 ARM: dts: omap5: Correct the dma controller's property names
According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 10:35:43 -08:00
Peter Ujfalusi 24ac177049 ARM: dts: omap4: Correct the dma controller's property names
According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 10:35:43 -08:00
Peter Ujfalusi 7e8d25d596 ARM: dts: omap3: Correct the dma controller's property names
According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 10:35:43 -08:00
Peter Ujfalusi caa73a4688 ARM: dts: omap2: Correct the dma controller's property names
According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 10:35:43 -08:00
Felipe Balbi ee5d9cd2b3 ARM: dts: am437x-idk: fix sleep pinctrl state
we have i2c0 sleep pinctrl state but were passing
default state anyhow. Fix that.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 10:35:43 -08:00
Felipe Balbi 1236044825 ARM: dts: am437x-idk: fix TPS62362 i2c bus
As it turns out, tps62362 is actually on I2C bus0,
not bus1. This has gone unnoticed because Linux
doesn't use (as of now) that regulator at all, it's
setup by the bootloader and left as is.

While at that, also add missing reg property for
our regulator.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 10:35:43 -08:00
Pali Rohár cb9071d4bb ARM: dts: n900: Fix offset for smc91x ethernet
Offset for smc91x must be zero otherwise smc91x linux kernel driver does not
detect smc91x ethernet hardware in qemu N900 machine.

The 0x300 offset was used to supress a warning the smsc911x
driver produces about non-standard offset as 0x300 seems to
be the EEPROM default. As only three address lines are
connected both 0 and 0x300 will work just fine with 0 being
correct. The warning about the non-standard offset can be
fixed by writing to EEPROM as that's needed in any case to
set the MAC address.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
[tony@atomide.com: updated comments, just use 0 instead of 0x0]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 10:35:43 -08:00
Ivaylo Dimitrov 1861cda0de ARM: dts: n900: fix i2c bus numbering
With legacy boot i2c buses on Nokia N900 are numbered i2c1, i2c2 and i2c3.
Commit 20b80942ef ("ARM: dts: OMAP3+: Add i2c aliases") fixed the
numbering with DT boot, but introduced a regression on N900 - aliases
become i2c0, i2c1 and i2c2. Fix that by providing the correct aliases in
the board dts.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Nishanth Menon <nm@ti.com>
[tony@atomide.com: this is needed for legacy user space to work]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 10:35:43 -08:00
Tony Lindgren a54879a008 ARM: dts: Fix USB dts configuration for dm816x
Commit 7800064ba5 ("ARM: dts: Add basic dm816x device tree
configuration") added basic devices for dm816x, but I was not able
to test the USB completely because of an unconfigured USB phy, and
I only tested it to make sure the Mentor chips are detected and
clocked without a phy.

After testing the USB with actual devices I noticed a few issues
that should be fixed to avoid confusion:

- The USB id pin on dm8168-evm is hardwired and can be changed
  only by software. As there are two USB-A type connectors, let's
  start both in host mode instead of otg.

- The Mentor core is configured in such a way on dm8168-evm that
  it's not capable of multipoint at least on revision c board
  that I have.

- We need ranges for the syscon to properly set up the phy as
  children of the SCM syscon area.

- Let's not disable the second interface, the board specific
  dts files can do that if really needed. Most boards should
  just keep it enabled to ensure the device is idled properly.

Note that also a phy and several musb fixes are still needed to
make the USB to work properly in addition to this fix.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 08:48:52 -08:00
Roger Quadros a0182724ab ARM: dts: OMAP5: Fix SATA PHY node
The sata_ref_clk is a reference clock to the SATA phy.
This fixes SATA malfunction across suspend/resume or when
SATA driver is used as a module.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 08:16:49 -08:00
Roger Quadros 773c5a0fca ARM: dts: DRA7: Fix SATA PHY node
The sata_ref_clk is a reference clock to the SATA phy.
This fixes SATA malfunction across suspend/resume or when
SATA driver is used as a module.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 08:15:53 -08:00
Geert Uytterhoeven bee7a18e85 ARM: shmobile: sh73a0 dtsi: Add PM domain support
Add a device node for the System Controller, with subnodes that
represent the hardware power area hierarchy.
Hook up all devices to their respective PM domains.

Note that unlike on R-Mobile A1 (r8a7740), PM domain D4 can be powered
down without ill effects on s2ram behavior, just like on SH-Mobile AP4
(sh7372).  Hence we can postpone adding a (minimal) device node for the
Coresight-ETM hardware block.

The System Controller is also used by the R-Mobile Reset driver, which
can now restart the system.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 08:22:49 +09:00
Geert Uytterhoeven 3022574385 ARM: shmobile: sh73a0 dtsi: Add Cortex-A9 TWD node
Add a node for the Private Timer and Watchdog, as found in the Cortex-A9
MPCore.

Without this, there's no clocksource available during early kernel
initialization, before cmt1 is initialized, leading to a lock-up if
CONFIG_CPU_IDLE=y.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 08:22:48 +09:00
Simon Horman 7a91cc14f3 ARM: shmobile: kzm9g-reference: Remove board C code and DT file
Now that the sh73a0 generic multiplatform case has the same feature set
as the kzm9g DT reference board code, we get rid of the latter.
DT reference code in the future shall make use of the sh73a0
multiplatform support code with the generic SoC machine vector.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 08:22:48 +09:00
Geert Uytterhoeven 17f0f738e5 ARM: shmobile: kzm9g dts: Move Ethernet node to BSC
Move the Ethernet node from the root of the device tree to the BSC node,
as it's connected to the Bus State Controller.  This allows the system
to know the right position of the Ethernet node in the clock and PM
domain hierarchy, and manage the clock and PM domain appropriately.

Also rename the node's name from "lan9220" to "ethernet", to conform to
ePAPR generic name recomendations.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 08:22:47 +09:00
Geert Uytterhoeven 217b6e65e5 ARM: shmobile: sh73a0 dtsi: Add Bus State Controller node
Add a node for the Bus State Controller (BSC) on sh73a0, to which
multiple external devices can be connected.

The BSC is driven by the ZB clock, and located in PM domain A4S.
A reference to the latter will be added later.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 08:22:47 +09:00
Magnus Damm 36356bcc4d ARM: shmobile: kzm9g: Build DTS for Multiplatform
Build the sh73a0 KZM9G board DTB in case of Multiplatform.
The DT reference case will be removed in the future and
can be ignored for now.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 08:22:46 +09:00
Magnus Damm 682d2dfb1d ARM: shmobile: kzm9g dts: Sync with kzm9g-reference dts
Sync the two DTS for the KZM9G board. The target is the file
"sh73a0-kzm9g.dts" and it is made identical to the DT reference
case with the exception of the compatbile string. In the future
the DT reference file will go away.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
[geert: Update for recent changes to sh73a0-kzm9g-reference.dts]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 08:22:46 +09:00
Sergei Shtylyov b8e8ea127d ARM: shmobile: r8a7794: add SDHI DT support
Define the generic R8A7794 parts of the SDHI[012] device nodes.

Based on the orginal patch by Shinobu Uehara <shinobu.uehara.xc@renesas.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 08:18:47 +09:00
Magnus Damm edf4100906 ARM: shmobile: sh7372 dtsi: Remove Legacy DTSI file
Remove the sh7372 DTSI file for the now unsupported sh7372 SoC.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:25 +09:00
Magnus Damm 10c7fcbd0f ARM: shmobile: sh7372: Remove ZBOOT MMC/SDHI support
Remove the sh7372 implementation and the shared ZBOOT MMC
and SDHI support code from the compressed ARM boot loader.

With this in place it is no longer possible to boot any
self-contained kernel for sh7372 directly from Mask ROM
via SDHI and MMCIF hardware.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:24 +09:00
Magnus Damm c1b7506b52 ARM: shmobile: mackerel dts: Remove Legacy DTS file
Remove the DTS file for the no longer supported Mackerel board.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:16 +09:00
Ulrich Hecht d4578204e7 ARM: shmobile: r8a7778 dtsi: Add Bus State Controller node
Add a node for the Bus State Controller (BSC) on r8a7778, to which
multiple external devices can be connected.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:40:49 +09:00
Ulrich Hecht 1898fe1952 ARM: shmobile: bockw: add USB, VIN pin descriptions to DT
Adds pin control info for USB host and video-in devices.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:40:48 +09:00
Ulrich Hecht 05cabb839e ARM: shmobile: r8a7778: add internal ethernet controller to DT
Internal Ethernet controller DT entry with clock information.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:40:47 +09:00
Ulrich Hecht 66462be7c6 ARM: shmobile: r8a7778: add MSTP clock assignments to DT
Assigns clocks to i2c*, tmu*, scif*, mmcif, sdhi*, and hspi*.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:40:47 +09:00
Ulrich Hecht 93aa970d2b ARM: shmobile: r8a7778: Common clock framework DT description
Declares all r8a7778 clocks supported by the legacy clock framework,
plus tmu2.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
[horms: only included dtsi changes]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:40:45 +09:00
Ulrich Hecht 8c4892a633 ARM: shmobile: r8a7778: synchronize dts with reference platform
This moves everything to the legacy dts that is missing there to make it
suitable for use with multiplatform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:40:44 +09:00
Geert Uytterhoeven d1e21e3f57 ARM: shmobile: ape6evm dts: Drop console= bootargs parameter
Since ("ARM: shmobile: r8a73a4: ape6evm: Remove legacy platform"),
ape6evm is restricted to booting from DT, so chosen/stdout-path is
always used, and we can drop the "console=" parameter from
chosen/bootargs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:38:27 +09:00
Simon Horman 9d07d414d4 ARM: shmobile: r8a73a4: ape6evm: Remove legacy platform
This removes the remains of the legacy ape6evm platform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:38:14 +09:00
Ulrich Hecht 8ba1f188d6 ARM: shmobile: ape6evm-reference: Remove board C code and DT file
Now that the r8a73a4 generic multiplatform case has the same features as the
APE6EVM DT reference board code, we get rid of the latter.  DT reference
code in the future shall make use of the r8a73a4 multiplatform support code
with the generic SoC machine vector.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[geert: Update Documentation/devicetree/bindings/arm/shmobile.txt]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:37:50 +09:00
Geert Uytterhoeven e4ba0a9bdd ARM: shmobile: r8a73a4: Move pfc node to work around probe ordering bug
Currently the pin function controller (which is also a GPIO controller)
is instantiated before the interrupt controllers due to the order in the
DTS. At that time, the irq domains for the interrupt controllers
referenced by its interrupts-extended property cannot be found yet:

    irq: no irq domain found for /interrupt-controller@e61c0000 !

Nevertheless, the core OF probing code ignores this failure, besides a
debug message that's not normally printed:

    not all legacy IRQ resources mapped for pfc

and continues initialization of the device. Then, the sh-pfc driver
cannot find any IRQ resources, and thinks no interrupts are available,
causing gpio-keys to fail later:

    gpio-keys keyboard: Unable to claim irq 0; error -22
    gpio-keys: probe of keyboard failed with error -22

Move the pin function controller node after the interrupt controller
nodes it references to work around the bug in the core OF probing code.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:37:49 +09:00
Geert Uytterhoeven a656c60388 ARM: shmobile: ape6evm dts: Move Ethernet node to BSC
Move the Ethernet node from the ad-hoc lbsc node to the BSC node,
as its connected to the Bus State Controller.  This allows the system to
know the right position of the Ethernet node in the clock and PM domain
hierarchy, and manage the clock and PM domain appropriately.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:37:49 +09:00
Geert Uytterhoeven 271b3ad261 ARM: shmobile: r8a73a4 dtsi: Add Bus State Controller node
Add a node for the Bus State Controller (BSC) on r8a73a4, to which
multiple external devices can be connected.

The BSC is driven by the ZB clock, and located in PM domain C4.
A reference to the latter will be added later.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:37:48 +09:00
Ulrich Hecht 662dd64ff0 ARM: shmobile: r8a73a4: Add MSTP clock assignments to DT
Assigns clocks to dmac, i2c*, cmt1, thermal, scif*, sdhi*, and mmcif*.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:37:47 +09:00
Ulrich Hecht a76809a329 ARM: shmobile: r8a73a4: Common clock framework DT description
Declares all r8a73a4 clocks supported by the legacy clock framework.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:37:46 +09:00
Sergei Shtylyov 3453ca9e4f ARM: shmobile: r8a7790: add ADSP clocks
Add the ADSP clocks to the CPG and MSTP5 nodes of the R8A7790 device tree.

Based on the original patch by Konstantin Kozhevnikov
<konstantin.kozhevnikov@cogentembedded.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:58 +09:00
Sergei Shtylyov ae65a8ae4c ARM: shmobile: r8a7791: add ADSP clocks
Add the ADSP clocks to the CPG and MSTP5 nodes of the R8A7791 device tree.

Based on the original patch by Konstantin Kozhevnikov
<konstantin.kozhevnikov@cogentembedded.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:57 +09:00
Sergei Shtylyov 457acc4a6c ARM: shmobile: henninger: add CAN0 DT support
Define the Henninger board dependent part of the CAN0 device node.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:56 +09:00
Sergei Shtylyov 3cf0188461 ARM: shmobile: r8a7791: add CAN DT support
Define the generic R8A7791 parts of the CAN0/1 device nodes.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:56 +09:00
Sergei Shtylyov b324252cc1 ARM: shmobile: r8a7791: add CAN clocks
The R-Car CAN controllers can derive the CAN bus clock not only from their
peripheral clock input (clkp1) but also from the other internal clock (clkp2)
and external clock fed on CAN_CLK pin.  Describe those clocks in the device
tree,  along with  the USB_EXTAL clock  from which clkp2 is derived.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:55 +09:00
Sergei Shtylyov 6a7742b4ee ARM: shmobile: r8a7790: add CAN DT support
Define the generic R8A7790 parts of the CAN0/1 device nodes.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:54 +09:00
Sergei Shtylyov 41650f406c ARM: shmobile: r8a7790: add CAN clocks
The R-Car CAN controllers can derive the CAN bus clock not only from their
peripheral clock input (clkp1) but also from the other internal clock (clkp2)
and external clock fed on CAN_CLK pin.  Describe those clocks in the device
tree,  along with  the USB_EXTAL clock  from which clkp2 is derived.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:53 +09:00
Niklas Söderlund 4a5fcc685a ARM: shmobile: emev2-kzm9d dts: Add PFC information for uart1
Configure the pinmux on kzm9d to use the serial connector for uart1.

Signed-off-by: Niklas Söderlund <niso@kth.se>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:53 +09:00
Niklas Söderlund e7cdf791db ARM: shmobile: emev2 dtsi: Add PFC information
With this information all GPIOs can make use of the PFC functionality.

Signed-off-by: Niklas Söderlund <niso@kth.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:52 +09:00
Laurent Pinchart 83a0731b39 ARM: shmobile: koelsch: Add DU HDMI output support
Add DT nodes for the ADV7511 HDMI encoder and its HDMI output connector
and configure the DISP pin group that drives the HDMI transmitter DE
pin.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:50 +09:00
Simon Horman 2ea0d4ec39 ARM: shmobile: r8a7791: Correct SDHI clock labels and output-names
There appears to have been some inconsistency and confusion here as on
the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on
the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3.

Fixes: 59e79895b9 ("ARM: shmobile: r8a7791: Add clocks")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-02-24 06:30:49 +09:00
Simon Horman 5e7e155483 ARM: shmobile: r8a7794: Correct SDHI clock base address, labels and output-names
* Correct base address of SD3 div6 clk.
* Update div6 clock node labels
  There appears to have been some inconsistency and confusion here as on
  the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on
  the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3.

This has no run-time affect as the clock nodes are not currently used.

Fixes: 8e181633e6 ("ARM: shmobile: r8a7794: Add SDHI clocks to device tree")
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-02-24 06:30:48 +09:00
Laurent Pinchart a895b7cda3 ARM: shmobile: r8a7794: alt: Enable ethernet controller
Enable the ethernet controller for the Alt board. Pin muxing entries are
currently left out as r8a7794 pin control support isn't available yet.
We thus rely on the boot loader to configure ethernet pins for now.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:47 +09:00
Laurent Pinchart 82818d3482 ARM: shmobile: r8a7794: Add ethernet controller to device tree
Add a DT node for the on-SoC ethernet controller device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:47 +09:00
Laurent Pinchart 1cb2794f60 ARM: shmobile: r8a7794: Add IPMMU DT nodes
Add the six IPMMU instances found in the r8a7794 to DT with a disabled
status.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:46 +09:00
Laurent Pinchart f1951852ed ARM: shmobile: r8a7791: Add IPMMU DT nodes
Add the seven IPMMU instances found in the r8a7791 to DT with a disabled
status.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:45 +09:00
Laurent Pinchart 70496727c0 ARM: shmobile: r8a7790: Add IPMMU DT nodes
Add the six IPMMU instances found in the r8a7790 to DT with a disabled
status.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:44 +09:00
Laurent Pinchart bd8474853f ARM: shmobile: r8a7794: Add DMAC devices to DT
Instantiate the two system DMA controllers in the r8a7794 device tree.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:44 +09:00
Geert Uytterhoeven 3ce1bc08ef ARM: shmobile: kzm9g-reference dts: Declare the full 512 MiB of RAM
Traditionally, the first 16 MiB of RAM was reserved for the RT
processor.  However, this is incompatible with CONFIG_AUTO_ZRELADDR=y,
which requires that the start address of physical memory is a multiple
of 128 MiB.

As CONFIG_AUTO_ZRELADDR=y is enabled for multi-platform kernels, declare
RAM to start at 0x40000000.

While at it, reclaim the last 8 MiB of RAM, too, so the full 512 MiB is
available. Note that kzm9g_defconfig still has
CONFIG_MEMORY_START=0x41000000 and CONFIG_MEMORY_SIZE=0x1f000000, so
before the advent of DT we scribbled over the last 8 MiB, too.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:43 +09:00
Geert Uytterhoeven 89ebd5459c ARM: shmobile: kzm9g dts: Declare the full 512 MiB of RAM
Traditionally, the first 16 MiB of RAM was reserved for the RT
processor.  However, this is incompatible with CONFIG_AUTO_ZRELADDR=y,
which requires that the start address of physical memory is a multiple
of 128 MiB.

As CONFIG_AUTO_ZRELADDR=y is enabled for multi-platform kernels, declare
RAM to start at 0x40000000.

While at it, reclaim the last 8 MiB of RAM, too, so the full 512 MiB is
available. Note that kzm9g_defconfig still has
CONFIG_MEMORY_START=0x41000000 and CONFIG_MEMORY_SIZE=0x1f000000, so
before the advent of DT we scribbled over the last 8 MiB, too.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:42 +09:00
Ulrich Hecht 09940bf079 ARM: shmobile: sh73a0 dtsi: Add selectable sources to DIV6 clocks
Specifies clock sources and register bits.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
[geert: Drop renesas,src-shift/renesas,src-width, pad to 4 or 8 parents]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:41 +09:00
Geert Uytterhoeven 56a215d66b ARM: shmobile: sh73a0 dtsi: Add missing INTCA0 clock for irqpin module
This clock drives the irqpin controller modules.
Before, it was assumed enabled by the bootloader or reset state.
By making it available to the driver, we make sure it gets enabled when
needed, and allow it to be managed by system or runtime PM.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:41 +09:00
Laurent Pinchart 8ac627fa8e ARM: shmobile: kzm9g-reference dts: Add st1232 touchscreen node
Enable the kzm9g touchscreen controller in the board's DT file.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:40 +09:00
Geert Uytterhoeven 070048dc88 ARM: shmobile: kzm9g-reference dts: Add r2025sd rtc node
Add a DT node for the R2025D real-time clock, which is connected to
i2c0.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:39 +09:00
Geert Uytterhoeven 4bd1dd503a ARM: shmobile: kzm9g-reference dts: Add adxl345 accelerometer node
Add a DT node for the ADXL345 three-axis digital accelerometer sensor,
which is connected to i2c0.

As trivial i2c devices are matched against the first compatible entry
only, compatibility is declared with "adi,adxl34x" only for now.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

The device needs an interrupt to operate properly. Specify the two
interrupts used on the board.

While at it rename the DT node to accelerometer@1d to describe the
device's function instead of its model.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:38 +09:00
Geert Uytterhoeven 56b7271c9d ARM: shmobile: kzm9g-reference dts: Add ak8975 magnetometer node
Add a DT node for the AK8975 magnetometer sensor, which is connected to
i2c0.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Specify the device interrupt to avoid polling for end of conversion.

While at it rename the DT node to compass@c to describe the device's
function instead of its model.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:38 +09:00
Geert Uytterhoeven 5c9e276095 ARM: shmobile: kzm9g-reference dts: Sort i2c0 children by unit address
While at it rename the ak4648 node to "codec" to describe the device's
function instead of its model, and move its device-specific property
after its generic properties.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:37 +09:00
Laurent Pinchart 48bdf06dd9 ARM: shmobile: sh73a0 dtsi: Set control-parent for all irqpin nodes
The sh73a0 INTC can't mask interrupts properly most likely due to a
hardware bug. Set the control-parent property to delegate masking to the
parent interrupt controller.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:36 +09:00
Ulrich Hecht fe7c20fa68 ARM: shmobile: r8a7740 dtsi: add remaining DIV6 clocks
This adds the remaining DIV6 clocks and all possible parents for the SUB
clock.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:30:35 +09:00
Gregory CLEMENT 444fdf947d ARM: mvebu: Add Device Tree description of SDHCI for Armada 388 RD
The Device Tree description of SDHCI on Armada 388 RD board was
missing. This commit adds the node for it.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-02-23 15:18:34 +01:00
Gregory CLEMENT ddbdc5790f ARM: mvebu: Update the SDHCI node on Armada 38x
The binding of the armada-380-sdhci has been extended with a new
register in order to be able to use the SDR50 and DDR50 mode. This
commit add the resource associated to this new register for the
Armada 38x.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-02-23 15:18:34 +01:00
Gregory CLEMENT b757258a5e ARM: mvebu: Use macros for interrupt flags on Armada 38x sdhci node
Instead of hardcoding the values of the interrupt flags, use the
macros provided by <include/dt-bindings/interrupt-controller/irq.h>
and <include/dt-bindings/interrupt-controller/arm-gic.h> for the
Armada 38x SDHCI node.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-02-23 15:18:34 +01:00
Heiko Stuebner f36abc8698 ARM: dts: rockchip: enable gmac on rk3288-firefly
This was left out of the original firefly board definition due to the
ethernet support going completely through the network tree, making the
underlying nodes unavailable.

Now that everything is present enable the gmac on the firefly.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-02-23 10:12:31 +01:00
Heiko Stuebner 055b0c6753 ARM: dts: rockchip: enable usbphy on rk3288-firefly
Enable the usb phys on the firefly board.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-02-23 10:12:31 +01:00
Yunzhi Li e537c9ccfa ARM: dts: rockchip: Enable usb PHY on rk3288-evb board
Enable usb PHY for all usb ports on rk3288-evb.

Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-02-23 10:12:30 +01:00
Yunzhi Li f6db7029bb ARM: dts: rockchip: add rk3288 usb PHY
This patch adds a device_node for RK3288 SoC usb phy. It also
defines the phy to be used by three usb controllers: usb_host0/1
and usb_otg.

Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Tested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-02-23 10:12:30 +01:00
Linus Torvalds 2177033233 ARM: SoC fixes for 3.20-rc1
A few fixes that came in too late to make it into the first set of pull
 requests but would still be nice to have in -rc1. The majority of these
 are trivial build fixes for bugs that I found myself using randconfig
 testing, and a set of two patches from Uwe to mark DT strings as 'const'
 where appropriate, to resolve inconsistent section attributes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVOj632CrR//JCVInAQI4HA/8DUGKWO7kgYl25M+Mp6vrQeQkxbdw6QaN
 NHzbwgoa+dh36SqEVHvXIswfj8KvqZ8JtwwM4fZDIXSdWrCL7F08vgHAgg5ZcHsN
 D4UpNurZHE+eorDjh7i3rzVzxLO+y9O6CnQAsS0bzHMTjfVA/P2aQOBA+trKKmHa
 HNprHcCR4bDd9dNt1pKe+xheAQ2i0mDcfrl6o1w7Exht7r2vfx8fFBh70fOoB2X9
 EL8DXGrdI6rrBi7jicRaXRw7r79KLU6ItqkGbeJ/d79q6kcbxI7a6AcIaa0DEuZP
 IL5Qx53Elo6/WQgsId04mjVcZHW+u7amg8g5TbwG9VUgV3aajUY5u+wui1gnSFmN
 x0r3ze2ALMGTcB/RNiA6E12seGxhQKe95LNNN0w1kzU2pZ/gUqt+WbtgfF48itS4
 gd2w4h4Dmvr1c5bXXFdqfvk0AFU04OYvlg6S5WW8wGv80W0PpB072rPyOJRydjZx
 smTnPeSejcXTPxCaqeu36wXPdtfCY3oz72GOgKtcmet2vzXIXyv403N6kALcNtSN
 NkuFwIAv6HufHW+fRYYiZEAQUnJbg2XlzBTlvRfXciewdyjC2hdI5p69HLATwNQ3
 VnaTHD6SoHM0m1AefPpdoCCrpi7DRQ/N/oBLwDXzPkKmSt+LKeEgxgk87w8ZSmCN
 jDmHYoeh1bw=
 =hrfV
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "A few fixes that came in too late to make it into the first set of
  pull requests but would still be nice to have in -rc1.

  The majority of these are trivial build fixes for bugs that I found
  myself using randconfig testing, and a set of two patches from Uwe to
  mark DT strings as 'const' where appropriate, to resolve inconsistent
  section attributes"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: make of_device_ids const
  ARM: make arrays containing machine compatible strings const
  ARM: mm: Remove Kconfig symbol CACHE_PL310
  ARM: rockchip: force built-in regulator support for PM
  ARM: mvebu: build armada375-smp code conditionally
  ARM: sti: always enable RESET_CONTROLLER
  ARM: rockchip: make rockchip_suspend_init conditional
  ARM: ixp4xx: fix {in,out}s{bwl} data types
  ARM: prima2: do not select SMP_ON_UP
  ARM: at91: fix pm declarations
  ARM: davinci: multi-soc kernels require AUTO_ZRELADDR
  ARM: davinci: davinci_cfg_reg cannot be init
  ARM: BCM: put back ARCH_MULTI_V7 dependency for mobile
  ARM: vexpress: use ARM_CPU_SUSPEND if needed
  ARM: dts: add I2C device nodes for Broadcom Cygnus
  ARM: dts: BCM63xx: fix L2 cache properties
2015-02-21 19:21:54 -08:00
Linus Torvalds 18a8d49973 The clock framework changes for 3.20 contain the usual driver additions,
enhancements and fixes mostly for ARM32, ARM64, MIPS and Power-based
 devices. Additionaly the framework core underwent a bit of surgery with
 two major changes. The boundary between the clock core and clock
 providers (e.g clock drivers) is now more well defined with dedicated
 provider helper functions. struct clk no longer maps 1:1 with the
 hardware clock but is a true per-user cookie which helps us tracker
 users of hardware clocks and debug bad behavior. The second major change
 is the addition of rate constraints for clocks. Rate ranges are now
 supported which are analogous to the voltage ranges in the regulator
 framework. Unfortunately these changes to the core created some
 breakeage. We think we fixed it all up but for this reason there are
 lots of last minute commits trying to undo the damage.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU54D5AAoJEDqPOy9afJhJs6AQAK5YuUwjDchdpNZx9p7OnT1q
 +poehuUwE/gYjmdACqYFyaPrI/9f43iNCfFAgKGLQqmB5ZK4sm4ktzfBEhjWINR2
 iiCx9QYMQVGiKwC8KU0ddeBciglE2b/DwxB45m9TsJEjowucUeBzwLEIj5DsGxf7
 teXRoOWgXdz1MkQJ4pnA09Q3qEPQgmu8prhMfka/v75/yn7nb9VWiJ6seR2GqTKY
 sIKL9WbKjN4AzctggdqHnMSIqZoq6vew850bv2C1fPn7GiYFQfWW+jvMlVY40dp8
 nNa2ixSQSIXVw4fCtZhTIZcIvZ8puc7WVLcl8fz3mUe3VJn1VaGs0E+Yd3GexpIV
 7bwkTOIdS8gSRlsUaIPiMnUob5TUMmMqjF4KIh/AhP4dYrmVbU7Ie8ccvSxe31Ku
 lK7ww6BFv3KweTnW/58856ZXDlXLC6x3KT+Fw58L23VhPToFgYOdTxn8AVtE/LKP
 YR3UnY9BqFx6WHXVoNvg3Piyej7RH8fYmE9om8tyWc/Ab8Eo501SHs9l3b2J8snf
 w/5STd2CYxyKf1/9JLGnBvGo754O9NvdzBttRlygB14gCCtS/SDk/ELG2Ae+/a9P
 YgRk2+257h8PMD3qlp94dLidEZN4kYxP/J6oj0t1/TIkERWfZjzkg5tKn3/hEcU9
 qM97ZBTplTm6FM+Dt/Vk
 =zCVK
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux

Pull clock framework updates from Mike Turquette:
 "The clock framework changes contain the usual driver additions,
  enhancements and fixes mostly for ARM32, ARM64, MIPS and Power-based
  devices.

  Additionally the framework core underwent a bit of surgery with two
  major changes:

   - The boundary between the clock core and clock providers (e.g clock
     drivers) is now more well defined with dedicated provider helper
     functions.  struct clk no longer maps 1:1 with the hardware clock
     but is a true per-user cookie which helps us tracker users of
     hardware clocks and debug bad behavior.

   - The addition of rate constraints for clocks.  Rate ranges are now
     supported which are analogous to the voltage ranges in the
     regulator framework.

  Unfortunately these changes to the core created some breakeage.  We
  think we fixed it all up but for this reason there are lots of last
  minute commits trying to undo the damage"

* tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux: (113 commits)
  clk: Only recalculate the rate if needed
  Revert "clk: mxs: Fix invalid 32-bit access to frac registers"
  clk: qoriq: Add support for the platform PLL
  powerpc/corenet: Enable CLK_QORIQ
  clk: Replace explicit clk assignment with __clk_hw_set_clk
  clk: Add __clk_hw_set_clk helper function
  clk: Don't dereference parent clock if is NULL
  MIPS: Alchemy: Remove bogus args from alchemy_clk_fgcs_detr
  clkdev: Always allocate a struct clk and call __clk_get() w/ CCF
  clk: shmobile: div6: Avoid division by zero in .round_rate()
  clk: mxs: Fix invalid 32-bit access to frac registers
  clk: omap: compile legacy omap3 clocks conditionally
  clkdev: Export clk_register_clkdev
  clk: Add rate constraints to clocks
  clk: remove clk-private.h
  pci: xgene: do not use clk-private.h
  arm: omap2+ remove dead clock code
  clk: Make clk API return per-user struct clk instances
  clk: tegra: Define PLLD_DSI and remove dsia(b)_mux
  clk: tegra: Add support for the Tegra132 CAR IP block
  ...
2015-02-21 12:30:30 -08:00
Linus Torvalds ce1d3fde87 Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
 "This update brings:

   - the big cleanup up by Maxime for device control and slave
     capabilities.  This makes the API much cleaner.

   - new IMG MDC driver by Andrew

   - new Renesas R-Car Gen2 DMA Controller driver by Laurent along with
     bunch of fixes on rcar drivers

   - odd fixes and updates spread over driver"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits)
  dmaengine: pl330: add DMA_PAUSE feature
  dmaengine: pl330: improve pl330_tx_status() function
  dmaengine: rcar-dmac: Disable channel 0 when using IOMMU
  dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata
  dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device
  dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR
  dmaengine: rcar-dmac: Fix spinlock issues in interrupt
  dmaenegine: edma: fix sparse warnings
  dmaengine: rcar-dmac: Fix uninitialized variable usage
  dmaengine: shdmac: extend PM methods
  dmaengine: shdmac: use SET_RUNTIME_PM_OPS()
  dmaengine: pl330: fix bug that cause start the same descs in cyclic
  dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers
  dmaengine: at_xdmac: simplify channel configuration stuff
  dmaengine: at_xdmac: introduce save_cc field
  dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel
  ioat: fail self-test if wait_for_completion times out
  dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
  dmaengine: dw: amend description of dma_dev field
  dmatest: move src_off, dst_off, len inside loop
  ...
2015-02-18 08:49:20 -08:00
Arnd Bergmann f495fe8998 Merge tag 'arm-soc/for-3.20/dts' of http://github.com/broadcom/stblinux into fixes
This pull request contains the following Broadcom SoCs Device Tree changes:

- Ray adds support for the Cygnus i2c Device Tree controller on Cygnus SoCs
- Fixes to the BCM63138 dtsi file for the L2 cache controller properties

* tag 'arm-soc/for-3.20/dts' of http://github.com/broadcom/stblinux:
  ARM: dts: add I2C device nodes for Broadcom Cygnus
  ARM: dts: BCM63xx: fix L2 cache properties
2015-02-18 12:21:54 +01:00
Linus Torvalds 18656782a8 ARM: SoC driver updates
These are changes for drivers that are intimately tied to some SoC
 and for some reason could not get merged through the respective
 subsystem maintainer tree.
 
 This time around, much of this is for at91, with the bulk of it being syscon
 and udc drivers.
 
 Also, there's:
 - coupled cpuidle support for Samsung Exynos4210
 - Renesas 73A0 common-clk work
 - of/platform changes to tear down DMA mappings on device destruction
 - a few updates to the TI Keystone knav code
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU4upSAAoJEIwa5zzehBx3HkUP/Rc4B1yZChNIFNfVq4dbei6w
 dT9WdFmxOIj2JLeXEypFBiNf1nSHmsxrZe9/IDACz2fYQOnaZZ6/786utUJP/PtC
 2GDJy9cjL2Xh03We3nQp5z6J33XvpEni1t82cOpCl8wLBOQNnkjEks8UvLgi1LHW
 CNLcMm8JtDQ2aB/gRTjzetp9liZluESY5+Mig+loE2F/rzbMbNQDcWDDgUPyIQIS
 1onL+Bad3BnGFdo/+qnkurGc81pxoKiQJty06VWFftzvIwxXhsNjrqls2+KzstAx
 0lLvW1tqaDhXvUBImRM8GgfbldZslsgoFVmgESS9MpPMBNENYrkAiQNvJUnM7kd9
 qHDQNq+zRNsz/k4fVvp/YUp7xEiAo4rLcFmp/dBr535jS2LNyiZnB94q+kXsin/m
 tiyEMx+RWxEHTEHN9WdKE61Ty1RbzOa5UTLSzOKFAkF+m2nvuQsJvb97n19coAq9
 SSsj/wJgesfqrDEegphCDh1fyVxUzlAjjhTAyvPS155WvPzkbxZxuBbSqRuriRKA
 2aCfVne2ELimHAr3LEPgPW2kFBcONHckOGe6MvrTX4zPHU8bb9WIeg+iGdQChnr3
 nclT9jq+ZnQro5XTgUtPtadq100oEXlJbqpAzhd+cJbvgzSNbcWfcgE6kOWqd9uK
 oeWQWFLCdXLmXf9zCwmk
 =T7R2
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "These are changes for drivers that are intimately tied to some SoC and
  for some reason could not get merged through the respective subsystem
  maintainer tree.

  This time around, much of this is for at91, with the bulk of it being
  syscon and udc drivers.

  Also, there's:
   - coupled cpuidle support for Samsung Exynos4210
   - Renesas 73A0 common-clk work
   - of/platform changes to tear down DMA mappings on device destruction
   - a few updates to the TI Keystone knav code"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  cpuidle: exynos: add coupled cpuidle support for exynos4210
  ARM: EXYNOS: apply S5P_CENTRAL_SEQ_OPTION fix only when necessary
  soc: ti: knav_qmss_queue: change knav_range_setup_acc_irq to static
  soc: ti: knav_qmss_queue: makefile tweak to build as dynamic module
  pcmcia: at91_cf: depend on !ARCH_MULTIPLATFORM
  soc: ti: knav_qmss_queue: export API calls for use by user driver
  of/platform: teardown DMA mappings on device destruction
  usb: gadget: at91_udc: Allocate udc instance
  usb: gadget: at91_udc: Update DT binding documentation
  usb: gadget: at91_udc: Rework for multi-platform kernel support
  usb: gadget: at91_udc: Simplify probe and remove functions
  usb: gadget: at91_udc: Remove non-DT handling code
  usb: gadget: at91_udc: Document DT clocks and clock-names property
  usb: gadget: at91_udc: Drop uclk clock
  usb: gadget: at91_udc: Fix clock names
  mfd: syscon: Add Atmel SMC binding doc
  mfd: syscon: Add atmel-smc registers definition
  mfd: syscon: Add Atmel Matrix bus DT binding documentation
  mfd: syscon: Add atmel-matrix registers definition
  clk: shmobile: fix sparse NULL pointer warning
  ...
2015-02-17 09:38:59 -08:00
Linus Torvalds a233bb742a ARM: SoC DT updates
DT changes continue to be the bulk of our merge window contents.
 
 We continue to have a large set of changes across the board as new platforms
 and drivers are added.
 
 Some of the new platforms are:
 - Alphascale ASM9260
 - Marvell Armada 388
 - CSR Atlas7
 - TI Davinci DM816x
 - Hisilicon HiP01
 - ST STiH418
 
 There have also been some sweeping changes, including relicensing of DTS
 contents from GPL to GPLv2+/X11 so that the same files can be reused in
 other non-GPL projects more easily. There's also been changes to the
 DT Makefile to make it a little less conflict-ridden and churny down
 the road.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU4u0bAAoJEIwa5zzehBx3XFQP+wbVDp39ay3SRanFWeXqhfTe
 6jRsYrOcq6BN/b1NugjD+yKIYp2MQhwlXbMmj/1vnmJ3XSY25ZMLlgs0/vsNk7W2
 5e0xySwdhd1DjsajhZyN+5gUgqcTgOof/V+CbEUkijDDJ9v/WJbGZrpCHDz+UVTh
 dG9p1vrKoxDELAVbnp9muKZPlaQkAM60zJcHNJw9bJB5M0RCx4XFwPZc1cDLIsIZ
 lK/uYpKsgvgrGw5QuCtEK1/NkqLkBqgBfVg6xq0VB6OCYetqpxqs7kSZjnncIhQc
 PvxShsIJzb/dgfk7xBVb1+4Jfe5L/4poFwS69QuBlr/wiwc7wrhv37edgkyDlclS
 aj5xfOIhQdDaTkknFVs4QEkGAFg/lnTZnmiNiQdlsmDHqbWdTEELKShdVeMO7Zsg
 6bPdDipA2jsQ86UWNwucis8QulzVTuyNuU+Mlrxp73b76+hKXLkbYcZ51FJ/xMD8
 wLpCGqtc9Quirdb7Wy7XiVfesv3lKfDmzZB/6ZJ6zfadDvsqJPxAjNTA8VYZ9YeT
 EyW4K6CMOa5v+sLmIQUsAjKCYaul3PVDCi4voQjpS1ZtPLw+WN3zqX5XZZDT9Ll2
 D1ycmInp/40KsQgjV36u1NlIKMM+oaUJaSzaSPGdgj3Zcw0YZi8O+h0m6iHrlzUB
 uGFufsLKmcOFY/sLwprt
 =XEw1
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT changes continue to be the bulk of our merge window contents.

  We continue to have a large set of changes across the board as new
  platforms and drivers are added.

  Some of the new platforms are:
   - Alphascale ASM9260
   - Marvell Armada 388
   - CSR Atlas7
   - TI Davinci DM816x
   - Hisilicon HiP01
   - ST STiH418

  There have also been some sweeping changes, including relicensing of
  DTS contents from GPL to GPLv2+/X11 so that the same files can be
  reused in other non-GPL projects more easily.  There's also been
  changes to the DT Makefile to make it a little less conflict-ridden
  and churny down the road"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits)
  ARM: dts: Add PPMU node for exynos4412-trats2
  ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato
  ARM: dts: Add PPMU dt node for exynos4 and exynos4210
  ARM: dts: Add PPMU dt node for exynos3250
  ARM: dts: add mipi dsi device node for exynos4415
  ARM: dts: add fimd device node for exynos4415
  ARM: dts: Add syscon phandle to the video-phy node for Exynos4
  ARM: dts: Add sound nodes for exynos4412-trats2
  ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2
  ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi
  ARM: dts: Add max77693 charger node for exynos4412-trats2
  ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
  ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2
  ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2
  ARM: dts: am57xx-beagle-x15: Fix USB2 mode
  ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
  ARM: dts: dra72-evm: Add extcon nodes for USB
  ARM: dts: dra7-evm: Add extcon nodes for USB
  ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
  ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb
  ...
2015-02-17 09:36:52 -08:00
Linus Torvalds 878ba61aa9 ARM: SoC platform changes
New and updated SoC support. Also included are some cleanups where the
 platform maintainers hadn't separated cleanups from new developent in
 separate branches.
 
 Some of the larger things worth pointing out:
 
 - A large set of changes from Alexandre Belloni and Nicolas Ferre
   preparing at91 platforms for multiplatform and cleaning up quite a
   bit in the process.
 - Removal of CSR's "Marco" SoC platform that never made it out to the
   market. We love seeing these since it means the vendor published
   support before product was out, which is exactly what we want!
 
 New platforms this release are:
 
 - Conexant Digicolor (CX92755 SoC)
 - Hisilicon HiP01 SoC
 - CSR/sirf Atlas7 SoC
 - ST STiH418 SoC
 - Common code changes for Nvidia Tegra132 (64-bit SoC)
 
 We're seeing more and more platforms having a harder time labelling
 changes as cleanups vs new development -- which is a good sign that
 we've come quite far on the cleanup effort. So over time we might start
 combining the cleanup and new-development branches more.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU4uiiAAoJEIwa5zzehBx3LtoQAIP4eInJAumhB67MexzWGIBx
 eOsloBRMEBrjBQdSYsdsypN6T61WjDu1aieCxEGzIqitcMa59AIyyzglmlXy3UmV
 XQuSnIBag2fsOqrvqd+c6ewzAMxm2/Nbi3+zjzApkf27NDlBLhEjxuK6pAAf4Yw9
 gyWqB9g0d4V06XdqRInRvyyVfMu6fdApHLnadtjcMdiorQGd1bcOE1sQYygy6N6e
 d6vGvyKSv4ygyDG9//njzm6C5OnmHliimMToeuDC2Scel69RM97EnMXys988CqUH
 0Ru7XANEujtHXSOBYOyCv1kk4V5NguGzlfepe23oidOew8MjUdyRvKrwUiMt3AnT
 SVqcZ9UU5wjJC6j+iADh+E7zww2H0rA6vFRzXy297dDuLg2C2ONFljBj/tIKGc71
 ++gLc6LRn7UmSyK98JMzkxDhmnnPn8w2O0M5GdabAqzZSfHlL1juW9ljp9Al5P6y
 apLRzqMGjEoyC4huXvB3XVfrxGfepe5pco6wVlwmF3ilwf7iHnfuHONC1aw2mPRO
 aOKiS+0gHWL3rNZtZQtyW7Ws0I2HJFip2CWIloBK1/2ntEoh51PH7jGw8iu/6jTk
 //DCXqPBNXcLqonB9CHJZ/EWt0wup0BcHyLjlWX7iEjsdP/QJXrDgnrV3qdHibbh
 AJASjs0YVDcdvRsRStlg
 =szd9
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "New and updated SoC support.  Also included are some cleanups where
  the platform maintainers hadn't separated cleanups from new developent
  in separate branches.

  Some of the larger things worth pointing out:

   - A large set of changes from Alexandre Belloni and Nicolas Ferre
     preparing at91 platforms for multiplatform and cleaning up quite a
     bit in the process.

   - Removal of CSR's "Marco" SoC platform that never made it out to the
     market.  We love seeing these since it means the vendor published
     support before product was out, which is exactly what we want!

  New platforms this release are:

   - Conexant Digicolor (CX92755 SoC)
   - Hisilicon HiP01 SoC
   - CSR/sirf Atlas7 SoC
   - ST STiH418 SoC
   - Common code changes for Nvidia Tegra132 (64-bit SoC)

  We're seeing more and more platforms having a harder time labelling
  changes as cleanups vs new development -- which is a good sign that
  we've come quite far on the cleanup effort.  So over time we might
  start combining the cleanup and new-development branches more"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (124 commits)
  ARM: at91/trivial: unify functions and machine names
  ARM: at91: remove at91_dt_initialize and machine init_early()
  ARM: at91: change board files into SoC files
  ARM: at91: remove at91_boot_soc
  ARM: at91: move alternative initial mapping to board-dt-sama5.c
  ARM: at91: merge all SOC_AT91SAM9xxx
  ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init()
  ARM: digicolor: select syscon and timer
  ARM: zynq: Simplify SLCR initialization
  ARM: zynq: PM: Fixed simple typo.
  ARM: zynq: Setup default gpio number for Xilinx Zynq
  ARM: digicolor: add low level debug support
  ARM: initial support for Conexant Digicolor CX92755 SoC
  ARM: OMAP2+: Add dm816x hwmod support
  ARM: OMAP2+: Add clock domain support for dm816x
  ARM: OMAP2+: Add board-generic.c entry for ti81xx
  ARM: at91: pm: remove warning to remove SOC_AT91SAM9263 usage
  ARM: at91: remove unused mach/system_rev.h
  ARM: at91: stop using HAVE_AT91_DBGUx
  ARM: at91: fix ordering of SRAM and PM initialization
  ...
2015-02-17 09:27:54 -08:00
Linus Torvalds ea7531ac4a ARM: SoC cleanups
This is a good healthy set of various code removals. Total net delta is 8100
 lines removed.
 
 Among the larger cleanups are:
 
 - Removal of old Samsung S3C DMA infrastructure by Arnd
 - Removal of the non-DT version of the 'lager' board by Magnus Damm
 - General stale code removal on OMAP and Davinci by Rickard Strandqvist
 - Removal of non-DT support on am3517 platforms by Tony Lindgren
 
 ... plus several other cleanups of various platforms across the board.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU4uYeAAoJEIwa5zzehBx3v58P/RGKt5e4CgCdHKjVhbPmADSE
 FVECT4qrIkf4dFgU5qPCBDCtQn/B3ljxZnq6Hqi8VxYD+pRcXt94R50ZyhGUZ6QF
 GLXU8jDSlY906uJwW+CHZFVLmDjTM4ONLn1ZMRtcdOrU3yGC5rZq9+Kla6ZIE6jb
 mUAFMj6e+NBPYDonq93G7968EdyLJOtK4B2ylPW0+wgSRGIEPibCiNi9yyN4hBFr
 LiaOyY/execKUo2K2BFWkfAZWt7GrwBu/qAkz/9YDRDiikLwFG2UBWbaik5Fj8tf
 v8wvpL6Af6iLpRx1wI/HoCgjFS/g/n4O3svMe7aHGyfrkEAxNtoCKlFscO8w/aLc
 eABNAb5j65it8IHvQMR5RhgqWoQe4XMlDcwsxotTe64GfxpTahdhDmhk7RKAY9Xq
 MyITvtZPTPHTSZHNEDE3HtgHn62ndSinYFhdTaBi2FQxLNCUFl2TKZxpb0r65JI/
 2yOf6hcgWGTgV1VOruAc5SHcSkQOY3SptM4n4F1B0VcDrCphBDYhRTdokELFJIIq
 I47Week8o0f+a4ot/sf0QhU68wVZENgUJO3/Q5Buta+UGSZa4NYH7Ymc159e7hGS
 k+7mCeTJC85F0H/EBWvCcZzbpwiq7jBRAY2PhqYF1EQkefdR/+28o1sX090fVaXD
 n0gXv3/ZDvJB2ryv8lR/
 =tsjK
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This is a good healthy set of various code removals.  Total net delta
  is 8100 lines removed.

  Among the larger cleanups are:

   - Removal of old Samsung S3C DMA infrastructure by Arnd
   - Removal of the non-DT version of the 'lager' board by Magnus Damm
   - General stale code removal on OMAP and Davinci by Rickard Strandqvist
   - Removal of non-DT support on am3517 platforms by Tony Lindgren

  ... plus several other cleanups of various platforms across the board"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (47 commits)
  ARM: sirf: drop redundant function and marco declaration
  arm: omap: specify PMUs are for ARMv7 CPUs
  arm: shmobile: specify PMUs are for ARMv7 CPUs
  arm: iop: specify PMUs are for XScale CPUs
  arm: pxa: specify PMUs are for XScale CPUs
  arm: realview: specify PMU types
  ARM: SAMSUNG: remove unused DMA infrastructure
  ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC
  ARM: davinci: Remove CDCE949 driver
  ARM: at91: remove useless at91rm9200_set_type()
  ARM: at91: remove useless at91rm9200_dt_initialize()
  ARM: at91: move debug-macro.S into the common space
  ARM: at91: remove useless at91_sysirq_mask_rtx
  ARM: at91: remove useless config MACH_AT91SAM9_DT
  ARM: at91: remove useless config MACH_AT91RM9200_DT
  ARM: at91: remove unused mach/memory.h
  ARM: at91: remove useless header file includes
  ARM: at91: remove unneeded header file
  rtc: at91/Kconfig: remove useless options
  ARM: at91/Documentation: add a README for Atmel SoCs
  ...
2015-02-17 09:17:33 -08:00
Linus Torvalds c397f8fa43 Merge branch 'akpm' (patches from Andrew)
Merge fifth set of updates from Andrew Morton:

 - A few things which were awaiting merges from linux-next:
     - rtc
     - ocfs2
     - misc others

 - Willy's "dax" feature: direct fs access to memory (mainly NV-DIMMs)
   which isn't backed by pageframes.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (37 commits)
  rtc: add driver for DS1685 family of real time clocks
  MAINTAINERS: add entry for Maxim PMICs on Samsung boards
  lib/Kconfig: use bool instead of boolean
  powerpc: drop _PAGE_FILE and pte_file()-related helpers
  ocfs2: set append dio as a ro compat feature
  ocfs2: wait for orphan recovery first once append O_DIRECT write crash
  ocfs2: complete the rest request through buffer io
  ocfs2: do not fallback to buffer I/O write if appending
  ocfs2: allocate blocks in ocfs2_direct_IO_get_blocks
  ocfs2: implement ocfs2_direct_IO_write
  ocfs2: add orphan recovery types in ocfs2_recover_orphans
  ocfs2: add functions to add and remove inode in orphan dir
  ocfs2: prepare some interfaces used in append direct io
  MAINTAINERS: fix spelling mistake & remove trailing WS
  dax: does not work correctly with virtual aliasing caches
  brd: rename XIP to DAX
  ext4: add DAX functionality
  dax: add dax_zero_page_range
  ext2: get rid of most mentions of XIP in ext2
  ext2: remove ext2_aops_xip
  ...
2015-02-17 08:38:30 -08:00
Arnaud Ebalard b4770fe527 arm: dts: zynq: update isl9305 compatible string to use isil vendor prefix
"isil" and "isl" prefixes are used at various locations inside the kernel
to reference Intersil corporation.  This patch is part of a series fixing
those locations were "isl" is used in compatible strings to use the now
expected "isil" prefix instead (NASDAQ symbol for Intersil and most used
version).

Note: isl9305 is an I2C device so the patch does not in fact currently
depend on the introduction of "isil"-based compatible string in isl9305
driver (provided by another patch) because I2C core does not check the
prefix yet.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Uwe Kleine-Knig <uwe@kleine-koenig.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Darshana Padmadas <darshanapadmadas@gmail.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Landley <rob@landley.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16 17:56:02 -08:00
Linus Torvalds 8c334ce8f0 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Ingo Molnar:
 "The main change in this tree is the addition of various new SoC
  clocksource/clockevents drivers: Conexant Digicolor SoCs, rockchip
  rk3288 board, asm9260 for MIPS and versatile AB/PB boards"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dts: versatile: Add sysregs node
  clocksource: versatile: Adapt for Versatile AB and PB boards
  dt/bindings: Add binding for Versatile system registers
  clocksource: Driver for Conexant Digicolor SoC timer
  clocksource: devicetree: Document Conexant Digicolor timer binding
  clockevents: rockchip: Add rockchip timer for rk3288
  ARM: clocksource: Add asm9260_timer driver
  clocksource: marco: Rename marco to atlas7
  clocksource: sirf: Remove unused variable
2015-02-16 15:26:10 -08:00
Ray Jui b51c05a331 ARM: dts: add I2C device nodes for Broadcom Cygnus
Add I2C device nodes and its properties in bcm-cygnus.dtsi but keep
them disabled there. Individual I2C devices can be enabled in board
specific dts file when I2C slave devices are enabled in the future

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Reviewed-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-02-16 12:50:39 -08:00
Florian Fainelli 9df11828d9 ARM: dts: BCM63xx: fix L2 cache properties
The L2 cache properties were completely off with respect to what the
hardware is configured for. Fix the cache-size, cache-line-size and
cache-sets to reflect the L2 cache controller we have: 512KB, 16 ways
and 32 bytes per cache-line.

Fixes: 46d4bca044 ("ARM: BCM63XX: add BCM63138 minimal Device Tree")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-02-16 12:48:28 -08:00
Linus Torvalds a9724125ad TTY/Serial driver patches for 3.20-rc1
Here's the big tty/serial driver update for 3.20-rc1.  Nothing huge
 here, just lots of driver updates and some core tty layer fixes as well.
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlTgtgkACgkQMUfUDdst+ykXbACg14oFAmeYjO9RsdIHPXBvKseO
 47QAn0foy91bpNQ5UFOxWS5L6Fzj2ZND
 =syx2
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver patches from Greg KH:
 "Here's the big tty/serial driver update for 3.20-rc1.  Nothing huge
  here, just lots of driver updates and some core tty layer fixes as
  well.  All have been in linux-next with no reported issues"

* tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
  serial: 8250: Fix UART_BUG_TXEN workaround
  serial: driver for ETRAX FS UART
  tty: remove unused variable sprop
  serial: of-serial: fetch line number from DT
  serial: samsung: earlycon support depends on CONFIG_SERIAL_SAMSUNG_CONSOLE
  tty/serial: serial8250_set_divisor() can be static
  tty/serial: Add Spreadtrum sc9836-uart driver support
  Documentation: DT: Add bindings for Spreadtrum SoC Platform
  serial: samsung: remove redundant interrupt enabling
  tty: Remove external interface for tty_set_termios()
  serial: omap: Fix RTS handling
  serial: 8250_omap: Use UPSTAT_AUTORTS for RTS handling
  serial: core: Rework hw-assisted flow control support
  tty/serial: 8250_early: Add support for PXA UARTs
  tty/serial: of_serial: add support for PXA/MMP uarts
  tty/serial: of_serial: add DT alias ID handling
  serial: 8250: Prevent concurrent updates to shadow registers
  serial: 8250: Use canary to restart console after suspend
  serial: 8250: Refactor XR17V35X divisor calculation
  serial: 8250: Refactor divisor programming
  ...
2015-02-15 11:37:02 -08:00
Gregory CLEMENT a73c730541 ARM: mvebu: add Device Tree description of RTC on Armada 38x
The Marvell Armada 38x SoCs contains an RTC which differs from the RTC
used in the other mvebu SoCs until now.  This commit adds the Device Tree
description of this interface at the SoC level.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Arnaud Ebalard <arno@natisbad.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Boris BREZILLON <boris.brezillon@free-electrons.com>
Cc: Lior Amsalem <alior@marvell.com>
Cc: Tawfik Bayouk <tawfik@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 21:21:43 -08:00
Arnaud Ebalard 1a67e256db ARM: mvebu: ISL12057 rtc chip can now wake up RN102, RN102 and RN2120
Now that alarm support for ISL12057 chip is available w/ the specific
"isil,irq2-can-wakeup-machine" property, let's use that feature of the
driver dedicated to NETGEAR ReadyNAS 102, 104 and 2120 specific routing of
RTC Alarm IRQ#2 pin; on those devices, this pin is not connected to the
SoC but to a PMIC, which allows the device to be powered up when RTC alarm
rings.

For that to work, the chip needs to be explicitly marked as a device
wakeup source using this "isil,irq2-can-wakeup-machine" boolean property.
This makes 'wakealarm' sysfs entry available to configure the alarm.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Darshana Padmadas <darshanapadmadas@gmail.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Landley <rob@landley.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 21:21:42 -08:00
Linus Torvalds 42cf0f203e Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:

 - clang assembly fixes from Ard

 - optimisations and cleanups for Aurora L2 cache support

 - efficient L2 cache support for secure monitor API on Exynos SoCs

 - debug menu cleanup from Daniel Thompson to allow better behaviour for
   multiplatform kernels

 - StrongARM SA11x0 conversion to irq domains, and pxa_timer

 - kprobes updates for older ARM CPUs

 - move probes support out of arch/arm/kernel to arch/arm/probes

 - add inline asm support for the rbit (reverse bits) instruction

 - provide an ARM mode secondary CPU entry point (for Qualcomm CPUs)

 - remove the unused ARMv3 user access code

 - add driver_override support to AMBA Primecell bus

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (55 commits)
  ARM: 8256/1: driver coamba: add device binding path 'driver_override'
  ARM: 8301/1: qcom: Use secondary_startup_arm()
  ARM: 8302/1: Add a secondary_startup that assumes ARM mode
  ARM: 8300/1: teach __asmeq that r11 == fp and r12 == ip
  ARM: kprobes: Fix compilation error caused by superfluous '*'
  ARM: 8297/1: cache-l2x0: optimize aurora range operations
  ARM: 8296/1: cache-l2x0: clean up aurora cache handling
  ARM: 8284/1: sa1100: clear RCSR_SMR on resume
  ARM: 8283/1: sa1100: collie: clear PWER register on machine init
  ARM: 8282/1: sa1100: use handle_domain_irq
  ARM: 8281/1: sa1100: move GPIO-related IRQ code to gpio driver
  ARM: 8280/1: sa1100: switch to irq_domain_add_simple()
  ARM: 8279/1: sa1100: merge both GPIO irqdomains
  ARM: 8278/1: sa1100: split irq handling for low GPIOs
  ARM: 8291/1: replace magic number with PAGE_SHIFT macro in fixup_pv code
  ARM: 8290/1: decompressor: fix a wrong comment
  ARM: 8286/1: mm: Fix dma_contiguous_reserve comment
  ARM: 8248/1: pm: remove outdated comment
  ARM: 8274/1: Fix DEBUG_LL for multi-platform kernels (without PL01X)
  ARM: 8273/1: Seperate DEBUG_UART_PHYS from DEBUG_LL on EP93XX
  ...
2015-02-12 08:51:56 -08:00
Linus Torvalds 718749d562 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
 "The first round of updates for the input subsystem.

  A few new drivers (power button handler for AXP20x PMIC, tps65218
  power button driver, sun4i keys driver, regulator haptic driver, NI
  Ettus Research USRP E3x0 button, Alwinner A10/A20 PS/2 controller).

  Updates to Synaptics and ALPS touchpad drivers (with more to come
  later), brand new Focaltech PS/2 support, update to Cypress driver to
  handle Gen5 (in addition to Gen3) devices, and number of other fixups
  to various drivers as well as input core"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
  Input: elan_i2c - fix wrong %p extension
  Input: evdev - do not queue SYN_DROPPED if queue is empty
  Input: gscps2 - fix MODULE_DEVICE_TABLE invocation
  Input: synaptics - use dmax in input_mt_assign_slots
  Input: pxa27x_keypad - remove unnecessary ARM includes
  Input: ti_am335x_tsc - replace delta filtering with median filtering
  ARM: dts: AM335x: Make charge delay a DT parameter for TSC
  Input: ti_am335x_tsc - read charge delay from DT
  Input: ti_am335x_tsc - remove udelay in interrupt handler
  Input: ti_am335x_tsc - interchange touchscreen and ADC steps
  Input: MT - add support for balanced slot assignment
  Input: drv2667 - remove wrong and unneeded drv2667-haptics modalias
  Input: drv260x - remove wrong and unneeded drv260x-haptics modalias
  Input: cap11xx - remove wrong and unneeded cap11xx modalias
  Input: sun4i-ts - add support for touchpanel controller on A31
  Input: serio - add support for Alwinner A10/A20 PS/2 controller
  Input: gtco - use sign_extend32() for sign extension
  Input: elan_i2c - verify firmware signature applying it
  Input: elantech - remove stale comment from Kconfig
  Input: cyapa - off by one in cyapa_update_fw_store()
  ...
2015-02-11 09:32:08 -08:00
Linus Torvalds a323ae93a7 sound updates for 3.20-rc1
In this batch, you can find lots of cleanups through the whole
 subsystem, as our good New Year's resolution.  Lots of LOCs and
 commits are about LINE6 driver that was promoted finally from staging
 tree, and as usual, there've been widely spread ASoC changes.
 
 Here some highlights:
 
 ALSA core changes
   - Embedding struct device into ALSA core structures
   - sequencer core cleanups / fixes
   - PCM msbits constraints cleanups / fixes
   - New SNDRV_PCM_TRIGGER_DRAIN command
   - PCM kerneldoc fixes, header cleanups
   - PCM code cleanups using more standard codes
   - Control notification ID fixes
 
 Driver cleanups
   - Cleanups of PCI PM callbacks
   - Timer helper usages cleanups
   - Simplification (e.g. argument reduction) of many driver codes
 
 HD-audio
   - Hotkey and LED support on HP laptops with Realtek codecs
   - Dock station support on HP laptops
   - Toshiba Satellite S50D fixup
   - Enhanced wallclock timestamp handling for HD-audio
   - Componentization to simplify the linkage between i915 and hd-audio
     drivers for Intel HDMI/DP
 
 USB-audio
   - Akai MPC Element support
   - Enhanced timestamp handling
 
 ASoC
   - Lots of refactoringin ASoC core, moving drivers to more data
     driven initialization and rationalizing a lot of DAPM usage
   - Much improved handling of CDCLK clocks on Samsung I2S controllers
   - Lots of driver specific cleanups and feature improvements
   - CODEC support for TI PCM514x and TLV320AIC3104 devices
   - Board support for Tegra systems with Realtek RT5677
   - New driver for Maxim max98357a
   - More enhancements / fixes for Intel SST driver
 
 Others
   - Promotion of LINE6 driver from staging along with lots of rewrites
     and cleanups
   - DT support for old non-ASoC atmel driver
   - oxygen cleanups, XIO2001 init, Studio Evolution SE6x support
   - Emu8000 DRAM size detection fix on ISA(!!) AWE64 boards
   - A few more ak411x fixes for ice1724 boards
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJU2ySIAAoJEGwxgFQ9KSmk/YMP/1v0r60aDt6VxlTbadt008R/
 jTEIzD4oGEMkhFQdlmN8MegZlx+05vxQUCGrVy8PLelhfy/mnj6z/iUt9ohE1PqK
 530eVr5FnlAbHs1JzP8Tm8Xbbtk8RXt5uvgohJvt7HBrc0Def9N/w37fUQ0ytO+s
 Ot/0Xm8BNsdJ90DfMVLc0Ok9cAFn4Z70gylE/PuGxbBBzxQh8PYPXtJ6Q/s5lKLV
 QC7VitJa0H7vsFYb+Ve7GU4cKMTt8uEPw8CdnQbDwb63ia93iWJJrlqKVUWYF2Gu
 K+mX5Igdb88ToXbMPrLKXe73IfFcdpWNTbj8IAv+Rp9fArylzz+3GAYmrqTAdare
 JEE5qAZTtJZEeD2vgNCnA4JpSbRzL0bHrEow21LnPONq3V9FB044NAeMSx3dI4j1
 fk+SnqrpJMtlCtgj2PuWzIcqRiJ25F/Qax/xFeZHo7FwLIBF7z5pLu9DP4CfUSXj
 fDEcB9aNF2VirJkQdbhHaPqTYVf2rHQ/ebDpDHBwkqFe865IHlJ8g8MrHnAFInKN
 jQlSTOqi9V3two53U1JIKcB6QcBH3vh60w2JsWsQadsr45YYQ/bvBHGYNpQ00C3U
 rbDBANhAHaF/hFncNnOQDsH65FqHj/ZlBQRhzX0LqxN4K0DM1FqGcLf2k6u/pzZU
 09+QlcIOOzN8lbvHR8Qx
 =/84r
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "In this batch, you can find lots of cleanups through the whole
  subsystem, as our good New Year's resolution.  Lots of LOCs and
  commits are about LINE6 driver that was promoted finally from staging
  tree, and as usual, there've been widely spread ASoC changes.

  Here some highlights:

  ALSA core changes
   - Embedding struct device into ALSA core structures
   - sequencer core cleanups / fixes
   - PCM msbits constraints cleanups / fixes
   - New SNDRV_PCM_TRIGGER_DRAIN command
   - PCM kerneldoc fixes, header cleanups
   - PCM code cleanups using more standard codes
   - Control notification ID fixes

  Driver cleanups
   - Cleanups of PCI PM callbacks
   - Timer helper usages cleanups
   - Simplification (e.g. argument reduction) of many driver codes

  HD-audio
   - Hotkey and LED support on HP laptops with Realtek codecs
   - Dock station support on HP laptops
   - Toshiba Satellite S50D fixup
   - Enhanced wallclock timestamp handling for HD-audio
   - Componentization to simplify the linkage between i915 and hd-audio
     drivers for Intel HDMI/DP

  USB-audio
   - Akai MPC Element support
   - Enhanced timestamp handling

  ASoC
   - Lots of refactoringin ASoC core, moving drivers to more data driven
     initialization and rationalizing a lot of DAPM usage
   - Much improved handling of CDCLK clocks on Samsung I2S controllers
   - Lots of driver specific cleanups and feature improvements
   - CODEC support for TI PCM514x and TLV320AIC3104 devices
   - Board support for Tegra systems with Realtek RT5677
   - New driver for Maxim max98357a
   - More enhancements / fixes for Intel SST driver

  Others
   - Promotion of LINE6 driver from staging along with lots of rewrites
     and cleanups
   - DT support for old non-ASoC atmel driver
   - oxygen cleanups, XIO2001 init, Studio Evolution SE6x support
   - Emu8000 DRAM size detection fix on ISA(!!) AWE64 boards
   - A few more ak411x fixes for ice1724 boards"

* tag 'sound-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (542 commits)
  ALSA: line6: toneport: Use explicit type for firmware version
  ALSA: line6: Use explicit type for serial number
  ALSA: line6: Return EIO if read/write not successful
  ALSA: line6: Return error if device not responding
  ALSA: line6: Add delay before reading status
  ASoC: Intel: Clean data after SST fw fetch
  ALSA: hda - Add docking station support for another HP machine
  ALSA: control: fix failure to return new numerical ID in 'replace' event data
  ALSA: usb: update trigger timestamp on first non-zero URB submitted
  ALSA: hda: read trigger_timestamp immediately after starting DMA
  ALSA: pcm: allow for trigger_tstamp snapshot in .trigger
  ALSA: pcm: don't override timestamp unconditionally
  ALSA: off by one bug in snd_riptide_joystick_probe()
  ASoC: rt5670: Set use_single_rw flag for regmap
  ASoC: rt286: Add rt288 codec support
  ASoC: max98357a: Fix build in !CONFIG_OF case
  ASoC: Intel: fix platform_no_drv_owner.cocci warnings
  ARM: dts: Switch Odroid X2/U2 to simple-audio-card
  ARM: dts: Exynos4 and Odroid X2/U3 sound device nodes update
  ALSA: control: fix failure to return numerical ID in 'add' event
  ...
2015-02-11 08:51:59 -08:00
Linus Torvalds c5ce28df0e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) More iov_iter conversion work from Al Viro.

    [ The "crypto: switch af_alg_make_sg() to iov_iter" commit was
      wrong, and this pull actually adds an extra commit on top of the
      branch I'm pulling to fix that up, so that the pre-merge state is
      ok.   - Linus ]

 2) Various optimizations to the ipv4 forwarding information base trie
    lookup implementation.  From Alexander Duyck.

 3) Remove sock_iocb altogether, from CHristoph Hellwig.

 4) Allow congestion control algorithm selection via routing metrics.
    From Daniel Borkmann.

 5) Make ipv4 uncached route list per-cpu, from Eric Dumazet.

 6) Handle rfs hash collisions more gracefully, also from Eric Dumazet.

 7) Add xmit_more support to r8169, e1000, and e1000e drivers.  From
    Florian Westphal.

 8) Transparent Ethernet Bridging support for GRO, from Jesse Gross.

 9) Add BPF packet actions to packet scheduler, from Jiri Pirko.

10) Add support for uniqu flow IDs to openvswitch, from Joe Stringer.

11) New NetCP ethernet driver, from Muralidharan Karicheri and Wingman
    Kwok.

12) More sanely handle out-of-window dupacks, which can result in
    serious ACK storms.  From Neal Cardwell.

13) Various rhashtable bug fixes and enhancements, from Herbert Xu,
    Patrick McHardy, and Thomas Graf.

14) Support xmit_more in be2net, from Sathya Perla.

15) Group Policy extensions for vxlan, from Thomas Graf.

16) Remove Checksum Offload support for vxlan, from Tom Herbert.

17) Like ipv4, support lockless transmit over ipv6 UDP sockets.  From
    Vlad Yasevich.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1494+1 commits)
  crypto: fix af_alg_make_sg() conversion to iov_iter
  ipv4: Namespecify TCP PMTU mechanism
  i40e: Fix for stats init function call in Rx setup
  tcp: don't include Fast Open option in SYN-ACK on pure SYN-data
  openvswitch: Only set TUNNEL_VXLAN_OPT if VXLAN-GBP metadata is set
  ipv6: Make __ipv6_select_ident static
  ipv6: Fix fragment id assignment on LE arches.
  bridge: Fix inability to add non-vlan fdb entry
  net: Mellanox: Delete unnecessary checks before the function call "vunmap"
  cxgb4: Add support in cxgb4 to get expansion rom version via ethtool
  ethtool: rename reserved1 memeber in ethtool_drvinfo for expansion ROM version
  net: dsa: Remove redundant phy_attach()
  IB/mlx4: Reset flow support for IB kernel ULPs
  IB/mlx4: Always use the correct port for mirrored multicast attachments
  net/bonding: Fix potential bad memory access during bonding events
  tipc: remove tipc_snprintf
  tipc: nl compat add noop and remove legacy nl framework
  tipc: convert legacy nl stats show to nl compat
  tipc: convert legacy nl net id get to nl compat
  tipc: convert legacy nl net id set to nl compat
  ...
2015-02-10 20:01:30 -08:00
Linus Torvalds c08f846793 PCI changes for the v3.20 merge window:
Enumeration
     - Move domain assignment from arm64 to generic code (Lorenzo Pieralisi)
     - ARM: Remove artificial dependency on pci_sys_data domain (Lorenzo Pieralisi)
     - ARM: Move to generic PCI domains (Lorenzo Pieralisi)
     - Generate uppercase hex for modalias var in uevent (Ricardo Ribalda Delgado)
     - Add and use generic config accessors on ARM, PowerPC (Rob Herring)
 
   Resource management
     - Free resources on failure in of_pci_get_host_bridge_resources() (Lorenzo Pieralisi)
     - Fix infinite loop with ROM image of size 0 (Michel Dänzer)
 
   PCI device hotplug
     - Handle surprise add even if surprise removal isn't supported (Bjorn Helgaas)
 
   Virtualization
     - Mark AMD/ATI VGA devices that don't reset on D3hot->D0 transition (Alex Williamson)
     - Add DMA alias quirk for Adaptec 3405 (Alex Williamson)
     - Add Wellsburg (X99) to Intel PCH root port ACS quirk (Alex Williamson)
     - Add ACS quirk for Emulex NICs (Vasundhara Volam)
 
   MSI
     - Fail MSI-X mappings if there's no space assigned to MSI-X BAR (Yijing Wang)
 
   Freescale Layerscape host bridge driver
     - Fix platform_no_drv_owner.cocci warnings (Julia Lawall)
 
   NVIDIA Tegra host bridge driver
     - Remove unnecessary tegra_pcie_fixup_bridge() (Lucas Stach)
 
   Renesas R-Car host bridge driver
     - Fix error handling of irq_of_parse_and_map() (Dmitry Torokhov)
 
   TI Keystone host bridge driver
     - Fix error handling of irq_of_parse_and_map() (Dmitry Torokhov)
     - Fix misspelling of current function in debug output (Julia Lawall)
 
   Xilinx AXI host bridge driver
     - Fix harmless format string warning (Arnd Bergmann)
 
   Miscellaneous
     - Use standard parsing functions for ASPM sysfs setters (Chris J Arges)
     - Add pci_device_to_OF_node() stub for !CONFIG_OF (Kevin Hao)
     - Delete unnecessary NULL pointer checks (Markus Elfring)
     - Add and use defines for PCIe Max_Read_Request_Size (Rafał Miłecki)
     - Include clk.h instead of clk-private.h (Stephen Boyd)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU1idjAAoJEFmIoMA60/r8C+gP/3p1Ya/cW+liX7e0Pz6wsrkB
 pAk9Af9Iz7RHYb0ODAs1XnlvuJJtJ6nXb9iXTFefhWKfVK0dF1i0w2VqsLUa+iLS
 V65XzkdtrEa+uJj5plvzehrHQhOPh5U2WtZvsAgeC6yu9F/LhnJywOIZjaYdCYwE
 /lXBgLPJiqXfDyEpKT6TqObwPpY7Ly+7+yNZ4LcO84AuBwb6lBq88Eyl7Ft+K57m
 dIJVh8ZTQMzVy5EcGbLoIYF4Mg8zdQbxju73bfeBNerxwd7QD7l0mfiQ3yIexRrQ
 FvzgIerDYdabKgYcbC3cQzMR4V0TEcWs0E7VqiokU4onor4VnK4A0PtbMEWcK8YN
 OZnQ8d4imHhJN4HdJeMhiKIIk+Cr52A1fC/AKmL0Ddw8yKusgjPz2Ux0pHpXMR1a
 NodymVV4XWcDBKWPX0DLESe8wJC4fN+v8bwMVWg20BC709BaK61yA7lGqJ70HmJ+
 u5mWokjgiycTQmJBiJmkEM9b5YVHLjrQ0PwDiYEtkxhMmd/ti+o12fhyNU8Epkr7
 fgDEI/OTURbhbrX0qiQ8RZiSSt5WXuy+ZWbw76rfo3SUH3Lt1WrcdbZrUd9em2hy
 dqOA1vV97JUtQMD/Dsg9apTObR9XJk2B/lyZs1YyCcb77KGSEsSw2x+xz3RRVHM4
 uQDwVupB/QsRVAu4tubr
 =N6mH
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Enumeration
    - Move domain assignment from arm64 to generic code (Lorenzo Pieralisi)
    - ARM: Remove artificial dependency on pci_sys_data domain (Lorenzo Pieralisi)
    - ARM: Move to generic PCI domains (Lorenzo Pieralisi)
    - Generate uppercase hex for modalias var in uevent (Ricardo Ribalda Delgado)
    - Add and use generic config accessors on ARM, PowerPC (Rob Herring)

  Resource management
    - Free resources on failure in of_pci_get_host_bridge_resources() (Lorenzo Pieralisi)
    - Fix infinite loop with ROM image of size 0 (Michel Dänzer)

  PCI device hotplug
    - Handle surprise add even if surprise removal isn't supported (Bjorn Helgaas)

  Virtualization
    - Mark AMD/ATI VGA devices that don't reset on D3hot->D0 transition (Alex Williamson)
    - Add DMA alias quirk for Adaptec 3405 (Alex Williamson)
    - Add Wellsburg (X99) to Intel PCH root port ACS quirk (Alex Williamson)
    - Add ACS quirk for Emulex NICs (Vasundhara Volam)

  MSI
    - Fail MSI-X mappings if there's no space assigned to MSI-X BAR (Yijing Wang)

  Freescale Layerscape host bridge driver
    - Fix platform_no_drv_owner.cocci warnings (Julia Lawall)

  NVIDIA Tegra host bridge driver
    - Remove unnecessary tegra_pcie_fixup_bridge() (Lucas Stach)

  Renesas R-Car host bridge driver
    - Fix error handling of irq_of_parse_and_map() (Dmitry Torokhov)

  TI Keystone host bridge driver
    - Fix error handling of irq_of_parse_and_map() (Dmitry Torokhov)
    - Fix misspelling of current function in debug output (Julia Lawall)

  Xilinx AXI host bridge driver
    - Fix harmless format string warning (Arnd Bergmann)

  Miscellaneous
    - Use standard parsing functions for ASPM sysfs setters (Chris J Arges)
    - Add pci_device_to_OF_node() stub for !CONFIG_OF (Kevin Hao)
    - Delete unnecessary NULL pointer checks (Markus Elfring)
    - Add and use defines for PCIe Max_Read_Request_Size (Rafał Miłecki)
    - Include clk.h instead of clk-private.h (Stephen Boyd)"

* tag 'pci-v3.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits)
  PCI: Add pci_device_to_OF_node() stub for !CONFIG_OF
  PCI: xilinx: Convert to use generic config accessors
  PCI: xgene: Convert to use generic config accessors
  PCI: tegra: Convert to use generic config accessors
  PCI: rcar: Convert to use generic config accessors
  PCI: generic: Convert to use generic config accessors
  powerpc/powermac: Convert PCI to use generic config accessors
  powerpc/fsl_pci: Convert PCI to use generic config accessors
  ARM: ks8695: Convert PCI to use generic config accessors
  ARM: sa1100: Convert PCI to use generic config accessors
  ARM: integrator: Convert PCI to use generic config accessors
  PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver
  ARM: dts: versatile: add PCI controller binding
  of/pci: Free resources on failure in of_pci_get_host_bridge_resources()
  PCI: versatile: Add DT docs for ARM Versatile PB PCIe driver
  PCI: Fail MSI-X mappings if there's no space assigned to MSI-X BAR
  r8169: use PCI define for Max_Read_Request_Size
  [SCSI] esas2r: use PCI define for Max_Read_Request_Size
  tile: use PCI define for Max_Read_Request_Size
  rapidio/tsi721: use PCI define for Max_Read_Request_Size
  ...
2015-02-10 14:31:28 -08:00
Russell King df9ab9771c Merge branch 'devel-stable' into for-next 2015-02-10 10:26:38 +00:00
Russell King ed8f8ce38d Merge branches 'debug', 'fixes', 'l2c' (early part), 'misc' and 'sa1100' into for-next 2015-02-10 10:26:27 +00:00
Mark Brown ddaaeee0e5 Merge remote-tracking branches 'asoc/topic/rt5670', 'asoc/topic/rt5677', 'asoc/topic/rx51', 'asoc/topic/samsung' and 'asoc/topic/sh' into asoc-next 2015-02-09 15:10:26 +08:00
Mark Brown 0cee4db21e Merge remote-tracking branches 'asoc/fix/ac97', 'asoc/fix/atmel', 'asoc/fix/intel', 'asoc/fix/rt286', 'asoc/fix/rt5640', 'asoc/fix/samsung', 'asoc/fix/sgtl5000', 'asoc/fix/sta32x', 'asoc/fix/tlv320aic3x' and 'asoc/fix/wm8731' into asoc-linus 2015-02-09 15:09:49 +08:00
Sylwester Nawrocki 16696337ca ARM: dts: Switch Odroid X2/U2 to simple-audio-card
Now when the CDCLK I2S output clock can be handled through the clock
API the Odroid X2/U3 can be switched to the simple-audio-card DT binding.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-09 14:18:20 +08:00
Sylwester Nawrocki 3635acef7c ARM: dts: Exynos4 and Odroid X2/U3 sound device nodes update
Clock related properties are added to the Exynos4 I2S device nodes
so they can be referred to as clock providers. Missing i2s_opclk1
clock is added to the I2S0 node and clock properties are added
to the MAX98090 codec node to allow it to control/read frequency
of the MCLK clock directly.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-09 14:18:20 +08:00
Linus Torvalds 2af613d373 sound fixes for 3.19
Hopefully the final pull request for 3.19: this ended up with a
 slightly higher volume than wished, but I put them all as they are
 either stable or 3.19 regression fixes.
 
 Most of commits are from ASoC, and have been stewed for a while in
 linux-next.  The only change in the common code is the regression
 fixes for ASoC AC97 stuff wrt device registrations.  The rest are
 device-specific, mostly small fixes in various ASoC drivers and
 ak411x on ice1724 boards.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJU1IACAAoJEGwxgFQ9KSmk3doP/AvQw++5VviePzYisnwWqiVF
 zZ4hLTHXKyVTz00Lvhuf31Xnv7MUBQ1m8ww+b6jaUWKd1ZZRshITzIhYtP8HHE5k
 LEDPuY1UeHiu0syidEVTCLZ1kXlNxKZ0F8da0rSl6/yN35l1lmiscPV0bpxXOsZH
 wxo8HItzkB8Jl6KrvjX5Ftlu30no6qw475Ud0DmIXLzE9l2J5pcV/TYLiyLrKV1M
 VnPvBFx5eCyIe2c9+V+29auQ2pdMmdqod66pnFDPSFPtGUF1cX/UuULRParEQWys
 iMG/zMBBIa5H+7HP9DT4hjipZSuFyWM9nNx+l1Hlwr5GoaK/Q0wyunULjLtuE4x5
 ScWA89D6okYpwJsiV6VNuzhk8qe7UUzUU/8CT8rtr8vbyJrFmGm9g7a3wmfPz2LV
 GNFApYkz5q4eHViqiXE15k8obJRgQH/bXjlhGtZMFSDx1RFgbacZTxsIjlSO6krG
 Wwt2mRMLQ/du2T1lIXcRYB6EwxxHFDdy3Yp8VzY3Yrf4Wg7Exyb3V2YrxtCDuONI
 4DADJNk4xWII6ApniF94PTjiOkyX1juLvuQKAhVz/scteCOmAZbGaV7fNs4unwhn
 nD2unzH+0EcOe77Ej/QS5I7X85R6k3aAQzhZdlQVQ46TdrlFBCvmMMhGJL8EtdXF
 IeOnw/QI7KVo3mSE7XyS
 =JNb4
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Hopefully the final pull request for 3.19: this ended up with a
  slightly higher volume than wished, but I put them all as they are
  either stable or 3.19 regression fixes.

  Most of commits are from ASoC, and have been stewed for a while in
  linux-next.  The only change in the common code is the regression
  fixes for ASoC AC97 stuff wrt device registrations.  The rest are
  device-specific, mostly small fixes in various ASoC drivers and ak411x
  on ice1724 boards"

* tag 'sound-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: Intel: fix sst firmware path for cht-bsw-rt5672
  ARM: dts: Fix I2S1, I2S2 compatible for exynos4 SoCs
  ASoC: sgtl5000: add delay before first I2C access
  MAINTAINERS: ASoC: add maintainer for Intel BDW/HSW ASoC driver
  ASoC: atmel_ssc_dai: fix the setting for DSP mode
  ASoC: sgtl5000: Use shift mask when setting codec mode
  ASoC: tlv320aic3x: Fix data delay configuration
  ALSA: ak411x: Fix stall in work callback
  ASoC: Intel: Used lock version to update shim registers
  ASoC: wm8731: init mutex in i2c init path
  ASoC: atmel_ssc_dai: fix start event for I2S mode
  ASoC: rt5640: Add RT5642 ACPI ID for Intel Baytrail
  ASoC: wm97xx: Reset AC'97 device before registering it
  ASoC: Add support for allocating AC'97 device before registering it
2015-02-06 12:50:37 -08:00
Olof Johansson 880c0d140d Samsung 4th DT updates for v3.20
- For exynos4 SoCs
   : add PPMU node
   : add syscon phandle for video-phy node
 
 - For exynos4415 SoC
   : add mipi dsi and fimd device nodes
 
 - For exynos3250-monk and exynos3250-rinato boards
   : add PPMU node
 
 - For exynos4412-trats2 board
   : add maxim77693 fuel gauge and battery charger nodes
   : fix regarding CLK_MOUT_CAMn parent and CLK_UART_ISP_SCLK clocks
   : switch max77686 regulators to GPIO control
   : add suspend configuration for max77686 regulators
   : add PPMU node and sound nodes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJU0iWQAAoJEA0Cl+kVi2xq4mEQAIB9QNNzxuc+oPIHibYzjlaD
 AZ+iJLtjbLBMxH05XgdnTtlSJPVbTlhRfypozSi7Nqb1jYyI4CMob4wCLshx4P8X
 Ymyqpdui5i4E2dTnM2hgIBq8NJRTvPcsahNXpyBjKCJ1QM7qNkvWn02UsAeQ+7f6
 n76ZUk4Do942aTy0yC9yvG6/GMW2Lfk27Ho4RvckHOIhy5aXiqB7qy+KFTZMpsiu
 Jwi8teKOZCHiXMyxYLTmdBxSJ5kdHvRwr+pSBAteihQsVFlum19aPln4tXWuQKCW
 /y864mFieUQlxzu2+juoa+ddbjqaQh3LVGRGlQk+VuDA2rPSbsjN8KSTAOpaApc6
 NLQkPx0h5Op6/8RrkLZl6qbMbkvBLhimx1uPstT5jPPPTdWVc+w92yWXiVGAyVNh
 vUzJ1FJMIvIpWUveBcl3wCu/3nBoXgwV20Pz67ddqkLBrRaqBEiZyeF0g2LXa50/
 jAmG/uzve01zI+ynFNLHN6rxfH0SW5vRFF1kqKF/eTmNSH9FPfQ6EK2f6cnE/Y5e
 OpcS0rac2T/YjSnsjF3F/YG4T99k6TaQnpqnymsLlpNS7L2wsCXllht+a16wc5dk
 tJ/o79sGiz5X1hCV3UbVlaJiFICwx6o4CVnnvyKKImnvmZE+SgV+QqDi+0BP05nA
 3AD3X2m6x5QKeCO8TQl3
 =Avge
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "Samsung 4th DT updates for v3.20" from Kukjin Kim:

- For exynos4 SoCs
  : add PPMU node
  : add syscon phandle for video-phy node

- For exynos4415 SoC
  : add mipi dsi and fimd device nodes

- For exynos3250-monk and exynos3250-rinato boards
  : add PPMU node

- For exynos4412-trats2 board
  : add maxim77693 fuel gauge and battery charger nodes
  : fix regarding CLK_MOUT_CAMn parent and CLK_UART_ISP_SCLK clocks
  : switch max77686 regulators to GPIO control
  : add suspend configuration for max77686 regulators
  : add PPMU node and sound nodes

* tag 'samsung-dt-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: Add PPMU node for exynos4412-trats2
  ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato
  ARM: dts: Add PPMU dt node for exynos4 and exynos4210
  ARM: dts: Add PPMU dt node for exynos3250
  ARM: dts: add mipi dsi device node for exynos4415
  ARM: dts: add fimd device node for exynos4415
  ARM: dts: Add syscon phandle to the video-phy node for Exynos4
  ARM: dts: Add sound nodes for exynos4412-trats2
  ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2
  ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi
  ARM: dts: Add max77693 charger node for exynos4412-trats2
  ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
  ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2
  ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-02-06 01:05:12 -08:00
Olof Johansson f5ebaf2687 Relicense all Armada dts{i} files under dual license of GPLv2+ and
X11. This should make it easier to reuse these files with other
 operating systems and boot loaders.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJUxuxOAAoJEOa/DcumaUyEShgP/3kdxUxjKFDxLuerOCbvUQ5p
 raAXsnysEij0x0yrQcIGRKLRN/OyQ/mZYcGJIAo6f15OuUKs+q7zoFW47kKMCoHY
 mDNp2bHC8j2LDp2QE7Ylib6xE1ttQFxRtABzLdem6yxuQHniHa+tkM7i6Kbil9Lk
 v764iOu3BAlLBKK7IEtoGeywWmhJ3mQ9IX8Tp5i91G0JW5GG7gpfrxg2RyzbBRg6
 75c3inm7nDpqQw6vBraJRLpPOD6TYTskWVPuEFiCoXJbOEBShgsE2q1RXEaJml71
 lajF7abfWpsmqhv5MsCPXBYJvC4MnHM7mDdE3OMr7/sjAYUHqnssFafS/o7B9eHW
 MpU/b8RBVzFlzs9PQ8WPcnOOomvgsKmuVTVTfzmdgnZDD75SMzNaZNDxYY9pISoZ
 UYelj7iKITr8fWuUkslf/ywuhCQjzs27sqM947Izpj3n71X2+UsxnwL1JvAv4vmh
 754I50Wo++RbbhKzm0HpkyzlGETeL97GdlCSBhWlU5nMFuUqzkSNPrSg7G9FbbpQ
 FrzTiQReBw8xe3YOrkQqSvGBZmv/KkNxIUYlqjkaDU0ni1ghjL2jzzv9J1wFvzpa
 yX+RFbYTj2t+foCROnsS/e4UBIwVjTpB5m96y2I+GiDRQO81ZAGote37TGCn3/6d
 kuDhIBUHqNE1PyZ5IziG
 =gJhY
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt-3.20-3' of git://git.infradead.org/linux-mvebu into next/dt

Merge "ARM: mvebu: DT changes for v3.20 (round 2)" from Gregory CLEMENT:

Relicense all Armada dts{i} files under dual license of GPLv2+ and
X11. This should make it easier to reuse these files with other
operating systems and boot loaders.

* tag 'mvebu-dt-3.20-3' of git://git.infradead.org/linux-mvebu: (27 commits)
  ARM: mvebu: armada-xp-synology-ds414: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-xp-openblocks-ax3-4: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-xp-netgear-rn2120: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-xp-mv78460: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-xp-mv78260: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-xp-mv78230: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-xp-matrix: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-xp-lenovo-ix4-300d: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-xp-gp: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-xp: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-xp-db: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-xp-axpwifiap: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-38x: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-388-rd: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-385: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-388-db: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-380: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-375: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-375-db: Relicense the device tree under GPLv2+/X11
  ARM: mvebu: armada-370-xp: Relicense the device tree under GPLv2+/X11
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-02-06 00:32:49 -08:00
Olof Johansson f9e297660b Device tree related chages for omaps to fix dm816x syscon,
fix various devices for gta04, and add USB nodes for am57xx
 and dra7.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUzBh/AAoJEBvUPslcq6Vz/M0QAK6mnBJJsm2BzBN1fXNRdnaP
 DDpa4kr9YIUCUjIaQrpj2olAt9DG6UO2oKSGM5v9hCB3F5kQDXD0X+Zn2huniGIy
 t/3JuZwU6aSGog/vxA7JIqzkfaKcGsTRUaV/81RE61cswguuvbDmCydV12p/VM2f
 P10AwOFXi9AUSHch/sB0k4c7r3J6subgX25GmzGKniEb7K0gVn/m1YDMETe3Wwsp
 bG3q/pqjKY35EuM/tvwXXYUll2vTSlv01rxWvzEWYPCSG1Fh/aPnNrHUjZW8o/yS
 fq4+LOezpLANAZDWYVYSDCfY6AVc0xpDGaGRxkx7f4LUBHcv34qYgpks424wZjSt
 sOFwyrNv0Z06nA1JSZVHKV5g06v1fAV63/WBTa+Dvn+MWwKQyAjme/ZX8wxnK/l0
 NPe72/O1WUqz7IWeSu0PicpnNTMvJGE6KypHrPUTAYmJoObEDwAogt6zP4K32eo3
 VlyuBgZrihjBkqQ4QPHBJrh4nY5wfhYTPb6P8t76i+Cm0V9NlGgjnEfPy2KXV2W4
 s4B8Zk9iBiuJGLfapUAuv6AMTIxcQuVpLO148a5T3TzPDPc6OZ3/OgQrkPyHGanO
 /WAvPkqKnnM0TXpHBc7OzNiAKhEaaVhcZ/OIxyZyIaZfaKhjOpYPi4UjimUkjjO1
 7ppHnPqot4adrTRxfl26
 =sRWN
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.20/dt-pt3-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "omap device tree changes for v3.20, part 3" from Tony Lindgren:

Device tree related chages for omaps to fix dm816x syscon,
fix various devices for gta04, and add USB nodes for am57xx
and dra7.

* tag 'omap-for-v3.20/dt-pt3-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am57xx-beagle-x15: Fix USB2 mode
  ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
  ARM: dts: dra72-evm: Add extcon nodes for USB
  ARM: dts: dra7-evm: Add extcon nodes for USB
  ARM: dts: Fix dm816x pinctrl and syscon so they are children of SCM
  ARM: dts: omap3-gta04: Disable keypad
  ARM: dts: omap3-gta04: only power DSS when necessary.
  ARM: dts: omap3-gta04: add gyroscope
  ARM: dts: omap3-gta04: enable power-off for wifi card.
  ARM: dts: omap3-gta04: add comments about gpios
  ARM: dts: omap3-gta04: Add ramp value for twl4030 audio
  ARM: dts: omap3-gta04: Enable power-off using twl4030
  ARM: dts: omap3-gta04: Fix a GPIO line for bma180 node
  ARM: dts: omap3-gta04: Enable twl audio vibra support
  ARM: dts: omap3-gta04: Enable mcbps2 necessary for audio
  ARM: dts: omap3-gta04: Fix audio node malformatting
  ARM: dts: omap3-gta04: Fix backup-battery charging in devicetree file.

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-02-06 00:09:16 -08:00
Olof Johansson 6f8c8f6baf Change are regulator nodes for the cpu and gpu regulators on the act8846
variant of the rk3288-evb and the setting of a clock for the watchdog.
 Also the lcd and hdmi controllers on both the firefly and the evb get
 enabled and let us now boot into fbcon console sucessfully.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJUy+f+AAoJEPOmecmc0R2BdFcH/i+9hgt9ElJxKbpPPVPVv81O
 QzmIi3g+B4WqAoKBfzkug5l82mSZ4FAvmQK5ad8BYHsBaGl+GRjwwaqRqZkPUOzl
 umXk0GneZ5sPK+S1UdA/S/v7hTwgEpXOLnGUCGUXbLt7Gqda99ume08jgCe2JbH5
 Tfjoia5uRlOgdZIf3KBr4TkPR+LHog1i/DI9N3XrAsjLtj/igHpoRmFydBmv7noo
 OuRuPY0afg1jKs/MextjM0W1JzQbGyv4Jp4NjVFv60+KZrMgS64vTDZamxYEK4Sv
 wn0pQUZgevQhd3ewdLtqrcbo4wIGiLWBXQK0vzonmo5tCk8r+59QFKxeMiq2C7Q=
 =ZVrD
 -----END PGP SIGNATURE-----

Merge tag 'v3.20-rockchip-dts3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "ARM: rockchip: third (and last) batch of dts updates for 3.20" from
Heiko Stübner:

Change are regulator nodes for the cpu and gpu regulators on the act8846
variant of the rk3288-evb and the setting of a clock for the watchdog.
Also the lcd and hdmi controllers on both the firefly and the evb get
enabled and let us now boot into fbcon console sucessfully.

* tag 'v3.20-rockchip-dts3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
  ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb
  ARM: dts: rockchip: housekeeping off i2c0 on rk3288-evb boards
  ARM: dts: rockchip: add cpu and gpu regulators to rk3288-evb-act8846
  ARM: dts: rockchip: add rk3288 watchdog clock
  clk: rockchip: add id for watchdog pclk on rk3288
  clk: rockchip: add clock IDs for the PVTM clocks
  clk: rockchip: add clock ID for usbphy480m_src

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-02-06 00:03:28 -08:00
Olof Johansson df1a668125 Fourth cleanup/soc batch for 3.20:
- merge all the at91sam9 code and remove the empty SoC-specific files
 - remove the at91_boot_soc that is now useless in a DT context
 - move the sram code in PM code as it's now only used there
 - some file + function name changes after this big cleanup
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJUz8xZAAoJEAf03oE53VmQMXsH/20+t69ZaB7HHVkyJpqtHs4e
 ilGPL+hSxofFjzfdvr1baHyUI6Jdu4pUHxBOBw8IY0PF87cbVhdn8JcD9eb5nnBD
 Z/ekKwZFnKXOyfQaRC1CHad7T+u6wa2uY+4LOC92JZipglltBVBPrm9wjfPIkii7
 R13AeXNi4a3DiOXhsAevbeLNeKF/X7L52RfVPttJwfih9B1YpSmetkMjE+mpk9D9
 P1JGhgTJyojhU2AacaRA3ECut8gWqBBN/FcswAZd5POxcBbNkDlZwCgXTGf3JXEt
 deVd8Sud/bCbzbxhHMGDvGmMluLpBCoxmy0ArDRewauDv6K4AbnO1p29Ad9Vs/U=
 =ESBq
 -----END PGP SIGNATURE-----

Merge tag 'at91-soc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/soc

Merge "at91: cleanup/soc for 3.20 #4" from Nicolas Ferre:

Fourth cleanup/soc batch for 3.20:
- merge all the at91sam9 code and remove the empty SoC-specific files
- remove the at91_boot_soc that is now useless in a DT context
- move the sram code in PM code as it's now only used there
- some file + function name changes after this big cleanup

* tag 'at91-soc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/trivial: unify functions and machine names
  ARM: at91: remove at91_dt_initialize and machine init_early()
  ARM: at91: change board files into SoC files
  ARM: at91: remove at91_boot_soc
  ARM: at91: move alternative initial mapping to board-dt-sama5.c
  ARM: at91: merge all SOC_AT91SAM9xxx
  ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init()
  ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree
  ARM: at91/dt: sam9263: Add missing clocks to lcdc node
  ARM: at91: sama5d3: dt: correct the sound route
  ARM: at91/dt: sama5d4: fix the timer reg length

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-02-05 23:58:29 -08:00
David S. Miller 6e03f896b5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/vxlan.c
	drivers/vhost/net.c
	include/linux/if_vlan.h
	net/core/dev.c

The net/core/dev.c conflict was the overlap of one commit marking an
existing function static whilst another was adding a new function.

In the include/linux/if_vlan.h case, the type used for a local
variable was changed in 'net', whereas the function got rewritten
to fix a stacked vlan bug in 'net-next'.

In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next'
overlapped with an endainness fix for VHOST 1.0 in 'net'.

In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter
in 'net-next' whereas in 'net' there was a bug fix to pass in the
correct network namespace pointer in calls to this function.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 14:33:28 -08:00
Mark Brown c503ca52a5 Merge remote-tracking branch 'asoc/fix/samsung' into asoc-linus 2015-02-05 19:36:29 +00:00
Sylwester Nawrocki fddcd30073 ARM: dts: Fix I2S1, I2S2 compatible for exynos4 SoCs
I2S1, I2S2 on Exynos4 SoC series have limited functionality compared
to I2S0, "samsung,s3c6410-i2s" compatible should be used for them.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-02-05 19:36:00 +00:00
Andy Shevchenko d8ded50f8b dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
Instead of using magic number in the code the patch provides
DW_DMA_MAX_NR_MASTERS constant.

While here, restrict the reading of data width array by amount of the actual
number of AHB masters.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-04 22:39:44 -08:00
Linus Torvalds 5659c0e470 Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
 "A number of ARM fixes, the biggest is fixing a regression caused by
  appended DT blobs exceeding 64K, causing the decompressor fixup code
  to fail to patch the DT blob.  Another important fix is for the ASID
  allocator from Will Deacon which prevents some rare crashes seen on
  some systems.  Lastly, there's a build fix for v7M systems when printk
  support is disabled.

  The last two remaining fixes are more cosmetic - the IOMMU one
  prevents an annoying harmless warning message, and we disable the
  kernel strict memory permissions on non-MMU which can't support it
  anyway"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8299/1: mm: ensure local active ASID is marked as allocated on rollover
  ARM: 8298/1: ARM_KERNMEM_PERMS only works with MMU enabled
  ARM: 8295/1: fix v7M build for !CONFIG_PRINTK
  ARM: 8294/1: ATAG_DTB_COMPAT: remove the DT workspace's hardcoded 64KB size
  ARM: 8288/1: dma-mapping: don't detach devices without an IOMMU during teardown
2015-02-04 09:42:55 -08:00
Chanwoo Choi 7808cae3e9 ARM: dts: Add PPMU node for exynos4412-trats2
This patch add dt node for PPMU_{DMC0|DMC1|LEFTBUS|RIGHTBUS} for
exynos4412-trats2 board. Each PPMU dt node includes one event of
'PPMU Count3'.

Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 08:11:52 +09:00
Chanwoo Choi 8d6b9b4694 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato
This patch adds PPMU dt node for Exynos3250 based Rinato and Monk
boards.  The PPMU node is used to get the utilization of DMC0/DMC1/
LEFTBUS/RIGHTBUS Block.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 08:10:58 +09:00
Chanwoo Choi 30e0e476ae ARM: dts: Add PPMU dt node for exynos4 and exynos4210
This patch add PPMUs (Platform Performance Monitoring Unit) dt node
for Exynos4 (Exynos4210/4212/4412) SoCs. PPMU dt node is used for
monitor the utilization of each IP.

The Exynos4210/Exynos4212/Exynos4412 SoC includes following PPMUs:
- PPMU_DMC0      0x106A_0000
- PPMU_DMC1      0x106B_0000
- PPMU_CPU       0x106C_0000
- PPMU_ACP       0x10AE_0000
- PPMU_RIGHT_BUS 0x112A_0000
- PPMU_LEFT_BUS  0x116A_0000
- PPMU_FSYS      0x1263_0000
- PPMU_LCD0      0x11E4_0000
- PPMU_CAMIF     0x11AC_0000
- PPMU_IMAGE     0x12AA_0000
- PPMU_TV        0x12E4_0000
- PPMU_3D        0x1322_0000
- PPMU_MFC_LEFT  0x1366_0000
- PPMU_MFC_RIGHT 0x1367_0000

Additionally, the Exynos4210 SoC includes following PPMUs:
- PPMU_LCD1      0x1224_0000

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 08:10:58 +09:00
Chanwoo Choi e4502367a0 ARM: dts: Add PPMU dt node for exynos3250
This patch adds PPMU (Platform Performance Monitoring Unit) dt node
to estimate the utilization of each IP in Exynos SoC through DEVFREQ
Event subsystem.

This patch adds following PPMU dt nodes:
- PPMU_DMC0     0x106a0000
- PPMU_DMC1     0x106b0000
- PPMU_RIGHTBUS 0x112A0000
- PPMU_LEFTBUS  0x116A0000
- PPMU_CAMIF    0x11AC0000
- PPMU_LCD0     0x11E40000
- PPMU_FSYS     0x12630000
- PPMU_3D       0x13220000
- PPMU_MFC      0x13660000
- PPMU_CPU      0x106c0000

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 08:10:58 +09:00
YoungJun Cho 59f504dc25 ARM: dts: add mipi dsi device node for exynos4415
This patch adds mipi dsi device node to exynos4415.dtsi.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 08:05:20 +09:00
YoungJun Cho 6c7c87a382 ARM: dts: add fimd device node for exynos4415
This patch adds fimd device node to exynos4415.dtsi.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 08:05:20 +09:00
Sylwester Nawrocki c8ef0bee5f ARM: dts: Add syscon phandle to the video-phy node for Exynos4
This is required to fix regression after introducing the PMU device
nodes required for the PMU driver modified in commit 14fc8b93d4
("ARM: EXYNOS: Add platform driver support for Exynos PMU").
This change is needed to make MIPI DSI displays and MIPI CSI-2
camera sensors working again on Exynos4 boards.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 07:58:24 +09:00
Inha Song 440e5aefa7 ARM: dts: Add sound nodes for exynos4412-trats2
This patch add WM1811 audio codec, I2S interface and the sound
machine nodes to enable audio on exynos4412-trats2 board.

Signed-off-by: Inha Song <ideal.song@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 07:51:38 +09:00
Sylwester Nawrocki cfe3b8933c ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2
In order to get exact 24MHz clock frequency value for the camera
sensor and avoid rounding errors the parent clock must be CLK_XUSBXTI,
not CLK_MOUT_MPLL_USER_T.  Currently the sensor's master clock
frequency is too high and the sensor doesn't work properly.

This fixes commit 0357a4438d
("ARM: dts: Specify default clocks for Exynos4 camera devices").

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 07:49:49 +09:00
Sylwester Nawrocki 79f3c37c88 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi
Assign proper FIMC-IS UART gate clock in the device DT node and not
use the SRC_MASK gate. This fixes regression introduced in commit
a37c82a3b3 ("clk: samsung: exynos4: Remove
SRC_MASK_ISP gates").

Without this change exynos4 fimc-is driver fails to probe with an
error log:

[    1.842447] ERROR: could not get clock /camera/fimc-is@12000000:uart(13)
[    1.848529] exynos4-fimc-is 12000000.fimc-is: failed to get clock: uart
[    1.855275] exynos4-fimc-is: probe of 12000000.fimc-is failed with error -2

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 07:49:08 +09:00
Krzysztof Kozlowski 043ef1485f ARM: dts: Add max77693 charger node for exynos4412-trats2
Add to Trats2 DTS new node for configuring the max77693 charger driver.
Only the maxim,constant-microvolt differs from default value but set all
of the optional properties anyway.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 07:47:39 +09:00
Krzysztof Kozlowski faf9a3eaa1 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
Remove fixed regulators (duplicating what max77686 provides) and
add GPIO enable control to max77686 regulators.

This gives the system full control over those regulators. Previously
the state of such regulators was a mixture of what max77686 driver set
over I2C and what regulator-fixed set through GPIO.

Removal of 'regulator-always-on' from CAM_ISP_CORE_1.2V (buck9) allows
disabling it when it is not used. Previously this regulator was always
enabled because its enable state is a OR of:
 - ENB9 GPIO (turned always on by regulator-fixed),
 - BUCK9EN field in BUCK9CTRL register (off by max77686 through I2C).

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 07:43:54 +09:00
Krzysztof Kozlowski 4a235f6aa9 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2
Add suspend to RAM configuration for max77686 regulators. Some LDOs
and bucks are disabled. This reduces energy consumption during S2R,
approximately from 17 mA to 9 mA.

Additionally remove old and not supported bindings:
 - regulator-mem-off
 - regulator-mem-idle
 - regulator-mem-on
The max77686 driver does not parse them and they are not documented
anywere.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 07:43:49 +09:00
Krzysztof Kozlowski e8614292cd ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2
Add node for fuel gauge present in Maxim 77693 PMIC. This allows control
over battery charging state on Trats2 board.

The fuel gauge is compatible with max17042 battery driver (Maxim
17042/17047/17050).  Although datasheet rev 2.2 for MAX77693 describes
fuel gauge as Maxim 17042-like, the chip on Trats2 board identifies
itself as Maxim 17047-like.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 07:43:44 +09:00
Vignesh R e6e4a0d198 ARM: dts: AM335x: Make charge delay a DT parameter for TSC
The charge delay value is by default 0x400. But it can be set to lower
values on some boards, as long as false pen-ups are avoided. Lowering the
value increases the sampling rate (though current sampling rate is
sufficient for TSC operation). In some boards, the value has to be
increased to avoid false pen-up events. Hence, charge delay has been
made a DT parameter.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-03 11:50:39 -08:00
Michael Turquette 54eea32f7e Merge branch 'clk-next' into v3.19-rc7 2015-02-02 14:59:38 -08:00
Tomasz Figa 62d38099bf ARM: dts: exynos4: Add stdout-path properties
This patch adds stdout-path property to chosen nodes of Exynos4 boards
to enable use of earlycon feature without the need to hardcode port
number in kernel itself.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02 10:11:26 -08:00
Nicolas Ferre 980657d8cd Third batch of cleanup/soc for 3.20:
- several fixes and adjustments following the last cleanup batch
 - removal of some unused Kconfig options
 - slight PM and pm_idle rework to ease future rework
 - removal of unneeded mach/system_rev.h
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJUxjj9AAoJEAf03oE53VmQGEAH/3nLneCOQeyuq60adx+Lxcdn
 Q9sMMzrw4B6bQnJee7+PQD3/QU7fmF8qNKlMKYAlILFHGNQplASi4uAfRTykUA0j
 RQHpS9n20ODVfX+yePJ/o8h2r1BkT2wUIDXxaZCj2RoPmEz1aiFDNa2pPsUfprRd
 gpbh+ZU43LRowYwH9UHPV55PQ0ZwMq3ry2DOYY5Al1+bKQ8TFvAdDMUu3rGZU7A4
 dMYiQCQ6Fv0EI1NY0IHSf/u/jujlPE2H0TSR38w8lYfIPzBx2tHkLSupuxKh7R1N
 QYibgZXWR0PqHOXMpOHYBqJFj5c3f/aOZ/dO4RJha+S7YHNQnIFzLsm122njgKQ=
 =KgUm
 -----END PGP SIGNATURE-----

Merge tag 'at91-cleanup3' into at91-3.20-soc
2015-02-02 10:59:34 +01:00
Nicolas Ferre c5517b1ea7 Merge branch 'at91-3.19-fixes' into at91-3.20-soc 2015-02-02 10:58:59 +01:00
Linus Torvalds fba7e99458 ARM: SoC fixes
One more week's worth of fixes. Worth pointing out here are:
 
 - A patch fixing detaching of iommu registrations when a device is removed --
   earlier the ops pointer wasn't managed properly
 - Another set of Renesas boards get the same GIC setup fixup as others have in
   previous -rcs
 - Serial port aliases fixups for sunxi. We did the same to tegra but we
   caught that in time before the merge window due to more machines being
   affected. Here it took longer for anyone to notice.
 - A couple more DT tweaks on sunxi
 - A follow-up patch for the mvebu coherency disabling in last -rc batch
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUzl/yAAoJEIwa5zzehBx3/v0P/iU4sCz/HYBwL46lSZZLnFyX
 RDFiq+I6nQFM3CG6oRn0gEi+/GbdyQ/Q6kMbver216pSfymZ+agRFaA6oj1o4HRD
 FQ2Dtz2ytvdkO8uSUzIV+nLJ//3MMwxmXTnB7SrDuzy6VeJ6GHlxxp39jrPCWtgi
 z7eo1bAuEKRQpVqJLBbqaNTsc4+9990zcgz5ChvfCqOvY3rE/AElEF5CMk71TFHW
 NTZQGM/HWteehA3/vTODICrd5SqV3peNAe3n6OMnZEEniUCesnug6IamUMwqKWVb
 y8rgobVV6ow5F0Cr3Zxc9Ufj8R1yayRQoGOdzDfuQ+zPivi2NbseinQgMUVujXYh
 TE/Ea4j+V1bYSY6EA89pAjw2C6e7fIWPOUJbO9hj5Ywc+uzR+ns+GFR2AaBggpFu
 4h0ig0ceOkzTgDWW0fNhH6BysvvczErT1CD0l6B+QgUZQadbSCFcGe8k2pNuJvYG
 f2lq6zUBIaNY5ZO6gu9inrd8UxjutKZM1p80fZc+tCFrm5YfHLFLwJPqfG7+8iEW
 R5OoQ1Jjb5SdO7u1yH2znQtlM9Z1u7bGQ7BkWPfZ0XbkHqiVgCpBUigzlRSgFO0+
 1rITIcwKgfdv8Sw4yngO6C3zFzn9Jz/cvGtW+gEjmSDV0BlhWCfWkTWys3ocdO79
 JSToPOtd87iekn7nHLBY
 =nw2v
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "One more week's worth of fixes.  Worth pointing out here are:

   - A patch fixing detaching of iommu registrations when a device is
     removed -- earlier the ops pointer wasn't managed properly
   - Another set of Renesas boards get the same GIC setup fixup as
     others have in previous -rcs
   - Serial port aliases fixups for sunxi.  We did the same to tegra but
     we caught that in time before the merge window due to more machines
     being affected.  Here it took longer for anyone to notice.
   - A couple more DT tweaks on sunxi
   - A follow-up patch for the mvebu coherency disabling in last -rc
     batch"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm: dma-mapping: Set DMA IOMMU ops in arm_iommu_attach_device()
  ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds
  ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds
  ARM: mvebu: don't set the PL310 in I/O coherency mode when I/O coherency is disabled
  ARM: sunxi: dt: Fix aliases
  ARM: dts: sun4i: Add simplefb node with de_fe0-de_be0-lcd0-hdmi pipeline
  ARM: dts: sun6i: ippo-q8h-v5: Fix serial0 alias
  ARM: dts: sunxi: Fix usb-phy support for sun4i/sun5i
2015-02-01 13:20:47 -08:00
Tony Lindgren f276c0ce5d net: davinci_emac: Get device MAC on 3517
Looks like on 3517 davinci_emac MAC address registers have a
different layout compared to dm816x and am33xx.

Let's add a function to get the 3517 MAC address.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 17:42:01 -08:00
Roger Quadros 726806ad9b ARM: dts: am57xx-beagle-x15: Fix USB2 mode
On this board USB2 is meant to be used as peripheral only.
The ID pin for USB2 is hardwired HIGH.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-30 15:48:39 -08:00
Roger Quadros f60db98eaa ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
On this EVM, the USB cable state has to be determined via the
ID pin tied to a GPIO line. We use the gpio-usb-extcon driver
to read the ID pin and the extcon framework to forward
the USB cable state information to the USB driver so the
controller can be configured in the right mode (host/peripheral).

NOTE: the ports on this board cannot switch roles. They are
configured either host or peripheral by hardwiring the
respective ID pins.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-30 15:48:39 -08:00
Roger Quadros f56de327b4 ARM: dts: dra72-evm: Add extcon nodes for USB
On this EVM, the USB cable state has to be determined via the
ID pin tied to a GPIO line. We use the gpio-usb-extcon driver
to read the ID pin and the extcon framework to forward
the USB cable state information to the USB driver so the
controller can be configured in the right mode (host/peripheral).

Gets USB peripheral mode to work on this EVM.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-30 15:48:39 -08:00
Roger Quadros 87517d26d8 ARM: dts: dra7-evm: Add extcon nodes for USB
On this EVM, the USB cable state has to be determined via the
ID pin tied to a GPIO line. We use the gpio-usb-extcon driver
to read the ID pin and the extcon framework to forward
the USB cable state information to the USB driver so the
controller can be configured in the right mode (host/peripheral).

Gets USB peripheral mode to work on this EVM.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-30 15:48:39 -08:00
Heiko Stuebner c25d8cbcd8 ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
Currently the hdmi driver is using one of the soc i2c busses for ddc probing
and while documentation always specifies i2c5 as hdmi-i2c it could very well
be any other bus as well.

Therefore this is a property of the board and should be specified there.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-30 00:10:59 +01:00
Heiko Stuebner 863b76b2b5 ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb
This enables the recently added display nodes on the firefly and evb,
letting the boards output graphic data over the hdmi port.

This includes enabling of i2c5 on the evb that is used for ddc probing and
setting the lcd-regulators to always on until the hdmi driver learns
about using them.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-30 00:10:55 +01:00
Heiko Stuebner 9fffa7ad0d ARM: dts: rockchip: housekeeping off i2c0 on rk3288-evb boards
Use the same transfer speed on both the rk808 and act8846 variants and
remove the status=okay from the rk808 one which is already set in the
shared rk3288-evb.dtsi .

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-29 23:21:15 +01:00
Heiko Stuebner 5bbb50d5a2 ARM: dts: rockchip: add cpu and gpu regulators to rk3288-evb-act8846
The evaluation board using the act8846 as main pmic uses two additional
regulators to provide the cpu and gpu voltage. Add these and also add
the link to cpu supply from vdd_cpu.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-01-29 23:20:47 +01:00
Olof Johansson 7679f31f14 arm: Xilinx Zynq dt patches for v3.20
- Add USB chipidea driver to DT
 - Add pincontrol
 - Add aliases node
 - Fix WDT node
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iEYEABECAAYFAlTKRKUACgkQykllyylKDCFdaQCghATSNR0DjT8Nj1aPTxr868KZ
 rx8An3sIUG5K/kj/Ccfn2Eq5wjautNef
 =hnva
 -----END PGP SIGNATURE-----

Merge tag 'zynq-dt-for-3.20' of https://github.com/Xilinx/linux-xlnx into next/dt

Merge "Zync DT for v3.20" from Michal Simek:

arm: Xilinx Zynq dt patches for v3.20

- Add USB chipidea driver to DT
- Add pincontrol
- Add aliases node
- Fix WDT node

* tag 'zynq-dt-for-3.20' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: DT: Add aliases node
  ARM: zynq: DT: Fix binding for cadence WDT
  ARM: zynq: DT: Add pinctrl information to USB nodes
  ARM: zynq: DT: Remove bogus value from 'bias-disable' property
  ARM: zynq: DT: Add pinctrl information
  ARM: zynq: DT: Add USB to device tree

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-29 14:03:28 -08:00
Olof Johansson 1215c3e65a Samsung 3rd DT updates for v3.20
- add DISP1 power domain for support HDMI support on exynos5420/5422/5800
   and the power domain node including FIMD1, MIXER and HDMI modules
   (tested on exynos5420 Peach Pit and exynos5800 Peach Pi Chromebooks
   and exynos5422 Odroid XU3 by Javier Martinez Canillas)
 
 Note this is including a patch for adding clock IDs for the DISP1 power
 domain with Mike and Sylwester's acks so that could be handled together
 to avoid non-working.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJUyXrPAAoJEA0Cl+kVi2xqxRgP/3+NBTV3qWQ6+pYTl4kCebIz
 6lCmjgMeLZFfqRT420ouK1w7K0ra2eeeLX1GNZHOayzzBfFEJfR7GL6GMh40NqHy
 qs5CtAGTDlwb8ZSIECBcklABXICE6nujl9lqa3WD1vjwJy9Zug/3BUYfSlxwJap6
 Uzrw1tGt+k7WcHWWSyC8FCsK8gpvxb5cAIcBYTRPrxwHcGGeVfvn4IFBcz5eYMsz
 EttmkxXOVcpVJ90c+iSyrLSVuc+YH0m+ITrYj0/EjlzJzlQQ1NKjBg+eUnWU9Zef
 L7bZp3r4ZWU1FYNzQuuUXaEwSfSzGJ2icKLmX5nmcH5XPSBWPTYRDEIJe2fX7j+X
 1zhxi992LvZysIgJrfPJf8N6vsOeKc2mfz/65YLjcbSpFX7Qe5hISlMIRAWYT/69
 IqVsH0E05VvXtpFKfSlfapsztAmfVsaRZwsHhvmMEZdzUatJehQAn2t5gftZQ0iu
 9/z1HD3uszZWPghbRuFBalmgWB8WEhF8yhiIRBx1o/ML7DAcdLtrZ2HrSobjnBYz
 APnxZAU6s4QwAAk5bQCN7p3jPqSnZUakg1ETeXf3j1qvfWhTmKcYPggYDtfb2Nou
 tIwJdY3VAJWC+9n/4pKw5OKsCdE/34DUdT9rkuIBhO+AbRpeGkztSVJmBRU4bGQM
 1yVwptBrUybxDLqM4Lad
 =9Imn
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "Samsung 3rd DT updates for v3.20" from Kukjin Kim:

- add DISP1 power domain for support HDMI support on exynos5420/5422/5800
  and the power domain node including FIMD1, MIXER and HDMI modules
  (tested on exynos5420 Peach Pit and exynos5800 Peach Pi Chromebooks
  and exynos5422 Odroid XU3 by Javier Martinez Canillas)

Note this is including a patch for adding clock IDs for the DISP1 power
domain with Mike and Sylwester's acks so that could be handled together
to avoid non-working.

* tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: Add DISP1 power domain for exynos5420
  clk: exynos5420: Add IDs for clocks used in DISP1 power domain

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-29 13:57:19 -08:00
Olof Johansson a35306d3ad Samsung 2nd DT updates for v3.20
- for all of Samsung SoCs
   : use generic power domain bindings
   : add 'dr_mode' property for hsotg/dwc2 devices
 
 - exynos3250-rinato and exynos3250-monk
   : add regulator-haptic
 
 - exynos5422-odroidxu3
   : reduce total RAM by 22 MiB because last 22 MiB
     for secure monitor cannot be accessed by kernel
   : add on-board INA231 sensors and LDO26 of PMIC
     for the sensors
 
 Note that this is based on tags/samsung-dt
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJUyXYCAAoJEA0Cl+kVi2xqZCMP/2B41IOspFq1wAbCLGNDT3sU
 sc1z7FR0OSXGVTsIkAQk1dIj9KpEKaygDezF1/3q/csc7lCFWoDDwdTR+zzatrzH
 cOyZnecMW/OOzzavc/qbUIfaJQjXwG1MNsdED44taJGJngG3NPvOmJJtA9HBPCPQ
 Fv9gmZF/PnstOl2I5exx3mznPIf7LRysHezj6rjbIO5R7znMcc56IegTQm59jY8+
 8i1njDINAhVDWGaLHAhDGy5gLEMHI5lST+NP0M9dnSf6pN53Ua20wPEsn5SJ7vRw
 Rn6frmZr/lIbKz0JlZtoU+QEcLUiJB7/ZYfKJGzKI5KmF9T3q+Rv+Su+JbGnQciL
 3EUy3lh/NDqW6Vvuy+G5UAg5lZ39Pt7BE/F6a0hT1GvRKYnsnY2XfTkIibmD8VDr
 0kLPJESKt1z8x5bowlBKlYe6sxU3/x2bYWBpAg0wMbt7oOz99w4kTgxNaJmiyL7y
 gda3IXWTkJ9z3sncW9UCbJBpgKM/+9+t6QFOszrXK0Upqz2qPi31levKV8XCwBzW
 h0SVULdmxRRm+u5z80++xXaeZ4dmKvQPFV9GJsCj2RGlFGWIi76SwGUZWANZFPAz
 g84ApMMvD8uvCJJoPw+gpocesEHckzFHhvbMHT6ctU2QW0JysbJ58vXHvXjc9zNO
 2VZnOAFYQq6fw6MiuUfE
 =DGVz
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "Samsung 2nd DT updates for v3.20" from Kukjin Kim:

- for all of Samsung SoCs
  : use generic power domain bindings
  : add 'dr_mode' property for hsotg/dwc2 devices

- exynos3250-rinato and exynos3250-monk
  : add regulator-haptic

- exynos5422-odroidxu3
  : reduce total RAM by 22 MiB because last 22 MiB
    for secure monitor cannot be accessed by kernel
  : add on-board INA231 sensors and LDO26 of PMIC
    for the sensors

* tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: reduce total RAM by 22 MiB for exynos5422-odroidxu3
  ARM: dts: add on-board INA231 sensors for exynos5422-odroidxu3
  ARM: dts: Add regulator-haptic node for exynos3250-monk
  ARM: dts: Add regulator-haptic node for exynos3250-rinato
  ARM: dts: add 'dr_mode' property to hsotg devices for exynos boards
  ARM: dts: convert to generic power domain bindings for exynos DT

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-29 13:54:26 -08:00
Baruch Siach 1e4cd7e52b ARM: digicolor: add minimal device tree description
cx92755.dtsi describes CX92755 on chip peripherals. cx92755_equinox.dts
describes the Equinox evaluation board for the CX92755 SoC.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-29 13:51:42 -08:00
Nicolas Pitre c2607f74aa ARM: 8294/1: ATAG_DTB_COMPAT: remove the DT workspace's hardcoded 64KB size
There is currently a hardcoded limit of 64KB for the DTB to live in and
be extended with ATAG info.  Some DTBs have outgrown that limit:

$ du -b arch/arm/boot/dts/omap3-n900.dtb
70212   arch/arm/boot/dts/omap3-n900.dtb

Furthermore, the actual size passed to atags_to_fdt() included the stack
size which is obviously wrong.

The initial DTB size is known, so use it to size the allocated workspace
with a 50% growth assumption and relocate the temporary stack above that.
This is also clamped to 32KB min / 1MB max for robustness against bad
DTB data.

Reported-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-29 15:23:01 +00:00
Rob Herring daeea28793 ARM: dts: versatile: add PCI controller binding
Add the PCI controller node for the Versatile/PB board.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
CC: Russell King <linux@arm.linux.org.uk>
2015-01-29 08:33:03 -06:00
Rob Herring 35a8578e8b dts: versatile: Add sysregs node
The Versatile boards have the same sysregs as other ARM Ltd boards. Add
the nodes in order to enable support for 24MHz counter as sched_clock.

This is a minimal node definition as the existing sub node definition
used on VExpress has some issues raised by Linus W.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-01-29 14:02:16 +01:00
Javier Martinez Canillas ea08de16eb ARM: dts: Add DISP1 power domain for exynos5420
The DISP1 power domain on Exynos5420 SoC includes the FIMD1, MIXER
and HDMI modules. Add a device node for this power domain and mark
these modules as consumer of the DISP1 power domain.

When a power domain is powered on and off, the input clocks of the
devices attached to it are reparented. So a reference to the input
and parent clocks of the devices are needed to manage that.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-29 08:52:23 +09:00
Tony Lindgren 72d032266b ARM: dts: Fix dm816x pinctrl and syscon so they are children of SCM
Looks like I only got half done with moving pinctrl and syscon to
be children of the SCM. I've set up the FAPLL clocks that way already,
but did not complete the job as I copied the syscon values from
am33xx.dtsi.

To make sure the syscon mapping works, I've verfified that we can
set up davinci_emac mac address the same way as cpsw already does
with the syscon mapping. So let's add that too.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-28 09:06:18 -08:00
Michal Simek ab216ac5a2 ARM: zynq: DT: Add aliases node
Add aliases node to DTs.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-28 15:18:32 +01:00
Michal Simek 8f63a0baee ARM: zynq: DT: Fix binding for cadence WDT
Based on:
"devicetree: Add Cadence WDT devicetree bindings documentation"
(sha1: 191891c037)

- compatible string is cdns,wdt-r1p2
- remove device_type property
- remove int reset property (reset-on-timeout is bool)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Series-to: arm-soc
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-28 15:18:32 +01:00
Soren Brinkmann 0c79b9fefd ARM: zynq: DT: Add pinctrl information to USB nodes
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-28 15:18:31 +01:00
Soren Brinkmann 38c735f3bd ARM: zynq: DT: Remove bogus value from 'bias-disable' property
In one pinctrl node, a 'bias-disable' property is erroneously assigned a
value.

Fixes: ARM: zynq: DT: Add pinctrl information
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-28 15:18:22 +01:00
Heiko Stuebner 39d05162a5 ARM: dts: rockchip: add rk3288 watchdog clock
Add the clock property for the watchdog on rk3288 socs.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
2015-01-28 11:02:07 +01:00