Commit Graph

950059 Commits

Author SHA1 Message Date
Michael Chan 556699341e tg3: Fix soft lockup when tg3_reset_task() fails.
If tg3_reset_task() fails, the device state is left in an inconsistent
state with IFF_RUNNING still set but NAPI state not enabled.  A
subsequent operation, such as ifdown or AER error can cause it to
soft lock up when it tries to disable NAPI state.

Fix it by bringing down the device to !IFF_RUNNING state when
tg3_reset_task() fails.  tg3_reset_task() running from workqueue
will now call tg3_close() when the reset fails.  We need to
modify tg3_reset_task_cancel() slightly to avoid tg3_close()
calling cancel_work_sync() to cancel tg3_reset_task().  Otherwise
cancel_work_sync() will wait forever for tg3_reset_task() to
finish.

Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Reported-by: Baptiste Covolato <baptiste@arista.com>
Fixes: db21997379 ("tg3: Schedule at most one tg3_reset_task run")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03 12:16:54 -07:00
Jiri Olsa 830fadfd95 perf tools: Add bpf image check to __map__is_kmodule
When validating kcore modules the do_validate_kcore_modules function
checks on every kernel module dso against modules record. The
__map__is_kmodule check is used to get only kernel module dso objects
through.

Currently the bpf images are slipping through the check and making the
validation to fail, so report falls back from kcore usage to kallsyms.

Adding __map__is_bpf_image check for bpf image and adding it to
__map__is_kmodule check.

Fixes: 3c29d4483e ("perf annotate: Add basic support for bpf_image")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200826213017.818788-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-03 16:04:46 -03:00
Kim Phillips e48a73a312 perf record/stat: Explicitly call out event modifiers in the documentation
Event modifiers are not mentioned in the perf record or perf stat
manpages.  Add them to orient new users more effectively by pointing
them to the perf list manpage for details.

Fixes: 2055fdaf87 ("perf list: Document precise event sampling for AMD IBS")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tony Jones <tonyj@suse.de>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-03 16:00:37 -03:00
YueHaibing e4d71f79cf perf bench: The do_run_multi_threaded() function must use IS_ERR(perf_session__new())
In case of error, the function perf_session__new() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR()

Committer notes:

This wasn't compiling due to an extraneous '{' not matched by a '}', fix
it.

Fixes: 13edc23720 ("perf bench: Add a multi-threaded synthesize benchmark")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200902140526.26916-1-yuehaibing@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-03 15:55:56 -03:00
Jin Yao ee6a961432 perf stat: Turn off summary for interval mode by default
There's a risk that outputting interval mode summaries by default breaks
CSV consumers. It already broke pmu-tools/toplev.

So now we turn off the summary by default but we create a new option
'--summary' to enable the summary. This is active even when not using
CSV mode.

Before:

  root@kbl-ppc:~# perf stat -I1000 --interval-count 2
  #           time             counts unit events
       1.000265904           8,005.73 msec cpu-clock                 #    8.006 CPUs utilized
       1.000265904                601      context-switches          #    0.075 K/sec
       1.000265904                 10      cpu-migrations            #    0.001 K/sec
       1.000265904                  0      page-faults               #    0.000 K/sec
       1.000265904         66,746,521      cycles                    #    0.008 GHz
       1.000265904         71,874,398      instructions              #    1.08  insn per cycle
       1.000265904         13,356,781      branches                  #    1.668 M/sec
       1.000265904            298,756      branch-misses             #    2.24% of all branches
       2.001857667           8,012.52 msec cpu-clock                 #    8.013 CPUs utilized
       2.001857667                164      context-switches          #    0.020 K/sec
       2.001857667                 10      cpu-migrations            #    0.001 K/sec
       2.001857667                  2      page-faults               #    0.000 K/sec
       2.001857667          5,822,188      cycles                    #    0.001 GHz
       2.001857667          2,186,170      instructions              #    0.38  insn per cycle
       2.001857667            442,378      branches                  #    0.055 M/sec
       2.001857667             44,750      branch-misses             #   10.12% of all branches

   Performance counter stats for 'system wide':

           16,018.25 msec cpu-clock                 #    7.993 CPUs utilized
                 765      context-switches          #    0.048 K/sec
                  20      cpu-migrations            #    0.001 K/sec
                   2      page-faults               #    0.000 K/sec
          72,568,709      cycles                    #    0.005 GHz
          74,060,568      instructions              #    1.02  insn per cycle
          13,799,159      branches                  #    0.861 M/sec
             343,506      branch-misses             #    2.49% of all branches

         2.004118489 seconds time elapsed

After:

  root@kbl-ppc:~# perf stat -I1000 --interval-count 2
  #           time             counts unit events
       1.001336393           8,013.28 msec cpu-clock                 #    8.013 CPUs utilized
       1.001336393                 82      context-switches          #    0.010 K/sec
       1.001336393                  8      cpu-migrations            #    0.001 K/sec
       1.001336393                  0      page-faults               #    0.000 K/sec
       1.001336393          4,199,121      cycles                    #    0.001 GHz
       1.001336393          1,373,991      instructions              #    0.33  insn per cycle
       1.001336393            270,681      branches                  #    0.034 M/sec
       1.001336393             31,659      branch-misses             #   11.70% of all branches
       2.003905006           8,020.52 msec cpu-clock                 #    8.021 CPUs utilized
       2.003905006                184      context-switches          #    0.023 K/sec
       2.003905006                  8      cpu-migrations            #    0.001 K/sec
       2.003905006                  2      page-faults               #    0.000 K/sec
       2.003905006          5,446,190      cycles                    #    0.001 GHz
       2.003905006          2,312,547      instructions              #    0.42  insn per cycle
       2.003905006            451,691      branches                  #    0.056 M/sec
       2.003905006             37,925      branch-misses             #    8.40% of all branches

  root@kbl-ppc:~# perf stat -I1000 --interval-count 2 --summary
  #           time             counts unit events
       1.001313128           8,013.20 msec cpu-clock                 #    8.013 CPUs utilized
       1.001313128                 83      context-switches          #    0.010 K/sec
       1.001313128                  8      cpu-migrations            #    0.001 K/sec
       1.001313128                  0      page-faults               #    0.000 K/sec
       1.001313128          4,470,950      cycles                    #    0.001 GHz
       1.001313128          1,440,045      instructions              #    0.32  insn per cycle
       1.001313128            283,222      branches                  #    0.035 M/sec
       1.001313128             33,576      branch-misses             #   11.86% of all branches
       2.003857385           8,020.34 msec cpu-clock                 #    8.020 CPUs utilized
       2.003857385                154      context-switches          #    0.019 K/sec
       2.003857385                  8      cpu-migrations            #    0.001 K/sec
       2.003857385                  2      page-faults               #    0.000 K/sec
       2.003857385          4,515,676      cycles                    #    0.001 GHz
       2.003857385          2,180,449      instructions              #    0.48  insn per cycle
       2.003857385            435,254      branches                  #    0.054 M/sec
       2.003857385             31,179      branch-misses             #    7.16% of all branches

   Performance counter stats for 'system wide':

           16,033.53 msec cpu-clock                 #    7.992 CPUs utilized
                 237      context-switches          #    0.015 K/sec
                  16      cpu-migrations            #    0.001 K/sec
                   2      page-faults               #    0.000 K/sec
           8,986,626      cycles                    #    0.001 GHz
           3,620,494      instructions              #    0.40  insn per cycle
             718,476      branches                  #    0.045 M/sec
              64,755      branch-misses             #    9.01% of all branches

         2.006124542 seconds time elapsed

Fixes: c7e5b328a8 ("perf stat: Report summary for interval mode")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200903010113.32232-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-03 15:48:41 -03:00
Tzvetomir Stoyanov (VMware) 10a6f5c3b3 libtraceevent: Fix build warning on 32-bit arches
Fixed a compilation warning for casting to pointer from integer of
different size on 32-bit platforms.

Reported-by: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-03 15:45:15 -03:00
Namhyung Kim e62458e394 perf jevents: Fix suspicious code in fixregex()
The new string should have enough space for the original string and the
back slashes IMHO.

Fixes: fbc2844e84 ("perf vendor events: Use more flexible pattern matching for CPU identification for mapfile.csv")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lore.kernel.org/lkml/20200903152510.489233-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-03 15:38:05 -03:00
Arnaldo Carvalho de Melo 0823f768b8 perf parse-events: Use uintptr_t when casting numbers to pointers
To address these errors found when cross building from x86_64 to MIPS
little endian 32-bit:

    CC       /tmp/build/perf/util/parse-events-bison.o
  util/parse-events.y: In function 'parse_events_parse':
  util/parse-events.y:514:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
    514 |      (void *) $2, $6, $4);
        |      ^
  util/parse-events.y:531:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
    531 |       (void *) $2, NULL, $4)) {
        |       ^
  util/parse-events.y:547:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
    547 |      (void *) $2, $4, 0);
        |      ^
  util/parse-events.y:564:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
    564 |       (void *) $2, NULL, 0)) {
        |       ^

Fixes: cabbf26821 ("perf parse: Before yyabort-ing free components")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-03 15:34:20 -03:00
Paul Barker af0ae997a3 doc: net: dsa: Fix typo in config code sample
In the "single port" example code for configuring a DSA switch without
tagging support from userspace the command to bring up the "lan2" link
was typo'd.

Signed-off-by: Paul Barker <pbarker@konsulko.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03 10:38:22 -07:00
Linus Torvalds e28f010434 Fix min_low_pfn/max_low_pfn build errors on ia64 and microblaze
Some configurations of ia64 and microblaze use min_low_pfn and
 max_low_pfn in pfn_valid(). This causes build failures for modules that
 use pfn_valid().
 
 The fix is to add EXPORT_SYMBOL() for these variables on ia64 and
 microblaze.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAl9RAB8THHJwcHRAbGlu
 dXguaWJtLmNvbQAKCRA5A4Ymyw79kaw9B/9icBkgDj/KQKnD5y5PgDis4AIHZ59d
 X2pIKk43sXB2xBQmtBxRkTrxHbBkNLOc81BaJJjkkVXEqGbtiYHHVgDFrazwFNwZ
 q480Ha8CP4mNyR3JZ/sI0npdqX/BQxLJPa5v6hAa+UZExFCbNnPpcam/GsJIw7T4
 Gd9caXJ3WE6uPrxjkdo6kthihfOxgSXX1cLIyMkFDZdhGbsBipm60+JScgk3f/cX
 77qggeJ/2f7HDSoBCsPcxqBxqdlQ6J5P5L2gNEN67GgSegNBs/GAs7xDbTx2XuFv
 9vTwZ8bTatkgLtnch5yQR/ul01DmgPZJUBQPYlLd7y+dfB5AgTBvNkby
 =oS5W
 -----END PGP SIGNATURE-----

Merge tag 'fixes-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock

Pull misc build failure fixes from Mike Rapoport:
 "Fix min_low_pfn/max_low_pfn build errors on ia64 and microblaze.

  Some configurations of ia64 and microblaze use min_low_pfn and
  max_low_pfn in pfn_valid(). This causes build failures for modules
  that use pfn_valid().

  The fix is to add EXPORT_SYMBOL() for these variables on ia64 and
  microblaze"

* tag 'fixes-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  ia64: fix min_low_pfn/max_low_pfn build errors
  microblaze: fix min_low_pfn/max_low_pfn build errors
2020-09-03 10:05:48 -07:00
Linus Torvalds 26acd8b07a affs-for-5.9-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAl9Qx/MACgkQxWXV+ddt
 WDvT8g//bO9+xB3dRYLVl5FWur826Zz/dmzpp+A3QCI0er1+zh8/3FHD6dvGyBQu
 CHQE1GFTdewry1usuGu08WopGiywnCa1svmp+qCJDugiDAG/ciTq2zQWemV2gRXU
 1/9yZ62B3eBKuiL+lFNPYFzqWhsX0zP21nxHEkTJi2d8enJDNcmrrWjBrVHUVa1o
 D0al0zPvaXpcknadhsNSkJnvgMeTcSz89AEIEC5OVfitbaIX09UAadG9kjPLlGJN
 KNL+/vmAARNe1ze5qjTf3++E1LH28CdJ7rrlhAqyR4L4rApCQw8ZQv3h8EbnidSy
 VJgDQCk35Z6IxVwbUKYEGiperV2dnsZHukzPT/sqjGrHO0Ct+Fy+YeK+4aw9yaof
 mWG7RGeczj9t/FbKEGmELlEOHKmJw+PHi5byTokPfsA8smrfaPKNJKlb5bbjALni
 hOThGiYr18n3RrSidpZ0GVxRcl8j3OwHSVDS/9U3eAF7Z31QtTDoX0MHbK6PrbvW
 KvGkqIwyLknshS868lyAzXSdg6K4wYqvuh2Z/TuFFPV2MGbsXxHEFgM7M1wueV6x
 iLhqUDYn2ki79FqqCYsUqWzDMc8m/4v//T4KPTj+BN9H8ij9bdzTXpaHrZAqLX0Y
 ielkB51hdAlCML/Ctd5xojn5YOXgo5TkSC32QOHvxovSI1qJCIo=
 =lVnf
 -----END PGP SIGNATURE-----

Merge tag 'affs-for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull affs fix from David Sterba:
 "One fix to make permissions work the same way as on AmigaOS"

* tag 'affs-for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  affs: fix basic permission bits to actually work
2020-09-03 08:41:36 -07:00
Darrick J. Wong d0c20d38af xfs: fix xfs_bmap_validate_extent_raw when checking attr fork of rt files
The realtime flag only applies to the data fork, so don't use the
realtime block number checks on the attr fork of a realtime file.

Fixes: 30b0984d91 ("xfs: refactor bmap record validation")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
2020-09-03 08:33:50 -07:00
Linus Torvalds 0fdf68c767 media fixes for v5.9-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl9Qh2sACgkQCF8+vY7k
 4RV+7Q/8D7Aj/6YArMxR2MvRhQt8tEoY1NgeP96JWagdklqJZH9jCXwW8h+/UOjw
 Sg7x3PP7kIKD5VtrY/zQz9m+B3+c8K1BM71IzEY5vzJR4UPYrPsqENw0+320rgjA
 Tnxu/P4bxbUOdP6fYbzdSLAZcvKfBOUDSiy6Cm9rw7e42XKi5F8ud1eqs5D/jViA
 8bbu5shdgeLOqCAbneu8gw3dP7+H47wcKX/FRF5QXRDzFj9BaCYZSiZKqEBgxXyc
 TOr6pM6evpc9TOP/H9G7d+kZSglPV7HzfehA/+c9d7kzmzexDztdPeJrN7P8Sl84
 MXs5ZClhYYqwf3ZpQT6abQZXG+N8xHu1TwSoMeZSrfzHJX+r61lMjt9GpdEvFif+
 U2Fv3mdKXWpYuUpSlWwy8QJLCnmuGgbc959eJ+CDkgkZT/twrDaXHqaG9emWErEs
 10znIW7FT8QiAHtkVADFYWj9JDiG+6q+lG94Jz/wjtfndk5aKdqm5jKIT6HI97h5
 5yMY4sS2m4RQKlwSFCQI1Fz3fSonvFmqBFaYXuP9xk+i7yAPa/owByLNttqwocVf
 N1UcLGFWJ684mHzQkgSQI6OiLTXP7NazK/N6CVVIy6Iaj/Cx2djVK9Y4gcYTKfgs
 HDKZbyUkhkFrU9kFYRlsdGf/VRqrjndHL4ySAWG/Gyl79/EGzHA=
 =OwNa
 -----END PGP SIGNATURE-----

Merge tag 'media/v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

 - a compilation fix issue with ti-vpe on arm 32 bits

 - two Kconfig fixes for imx214 and max9286 drivers

 - a kernel information leak at v4l2-core on time32 compat ioctls

 - some fixes at rc core unbind logic

 - a fix at mceusb driver for it to not use GFP_ATOMIC

 - fixes at cedrus and vicodec drivers at the control handling logic

 - a fix at gpio-ir-tx to avoid disabling interruts on a spinlock

* tag 'media/v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: mceusb: Avoid GFP_ATOMIC where it is not needed
  media: gpio-ir-tx: spinlock is not needed to disable interrupts
  media: rc: do not access device via sysfs after rc_unregister_device()
  media: rc: uevent sysfs file races with rc_unregister_device()
  media: max9286: Depend on OF_GPIO
  media: i2c: imx214: select V4L2_FWNODE
  media: cedrus: Add missing v4l2_ctrl_request_hdl_put()
  media: vicodec: add missing v4l2_ctrl_request_hdl_put()
  media: media/v4l2-core: Fix kernel-infoleak in video_put_user()
  media: ti-vpe: cal: Fix compilation on 32-bit ARM
2020-09-03 08:22:16 -07:00
Takashi Iwai 6a6660d049 ALSA: hda/realtek - Improved routing for Thinkpad X1 7th/8th Gen
There've been quite a few regression reports about the lowered volume
(reduced to ca 65% from the previous level) on Lenovo Thinkpad X1
after the commit d2cd795c4e ("ALSA: hda - fixup for the bass speaker
on Lenovo Carbon X1 7th gen").  Although the commit itself does the
right thing from HD-audio POV in order to have a volume control for
bass speakers, it seems that the machine has some secret recipe under
the hood.

Through experiments, Benjamin Poirier found out that the following
routing gives the best result:
* DAC1 (NID 0x02) -> Speaker pin (NID 0x14)
* DAC2 (NID 0x03) -> Shared by both Bass Speaker pin (NID 0x17) &
                     Headphone pin (0x21)
* DAC3 (NID 0x06) -> Unused

DAC1 seems to have some equalizer internally applied, and you'd get
again the output in a bad quality if you connect this to the
headphone pin.  Hence the headphone is connected to DAC2, which is now
shared with the bass speaker pin.  DAC3 has no volume amp, hence it's
not connected at all.

For achieving the routing above, this patch introduced a couple of
workarounds:

* The connection list of bass speaker pin (NID 0x17) is reduced not to
  include DAC3 (NID 0x06)
* Pass preferred_pairs array to specify the fixed connection

Here, both workarounds are needed because the generic parser prefers
the individual DAC assignment over others.

When the routing above is applied, the generic parser creates the two
volume controls "Front" and "Bass Speaker".  Since we have only two
DACs for three output pins, those are not fully controlling each
output individually, and it would confuse PulseAudio.  For avoiding
the pitfall, in this patch, we rename those volume controls to some
unique ones ("DAC1" and "DAC2").  Then PulseAudio ignore them and
concentrate only on the still good-working "Master" volume control.
If a user still wants to control each DAC volume, they can still
change manually via "DAC1" and "DAC2" volume controls.

Fixes: d2cd795c4e ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen")
Reported-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207407#c10
BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3214171
BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3276276
Link: https://lore/kernel.org/r/20200829112746.3118-1-benjamin.poirier@gmail.com
Link: https://lore.kernel.org/r/20200903083300.6333-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-09-03 12:49:12 +02:00
Thomas Bogendoerfer baf5cb30fb MIPS: SNI: Fix SCSI interrupt
On RM400(a20r) machines ISA and SCSI interrupts share the same interrupt
line. Commit 49e6e07e3c ("MIPS: pass non-NULL dev_id on shared
request_irq()") accidently dropped the IRQF_SHARED bit, which breaks
registering SCSI interrupt. Put back IRQF_SHARED and add dev_id for
ISA interrupt.

Fixes: 49e6e07e3c ("MIPS: pass non-NULL dev_id on shared request_irq()")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-03 12:00:23 +02:00
Huang Pei bb06748207 MIPS: add missing MSACSR and upper MSA initialization
In cc97ab235f ("MIPS: Simplify FP context initialization), init_fp_ctx
just initialize the fp/msa context, and own_fp_inatomic just restore
FCSR and 64bit FP regs from it, but miss MSACSR and upper MSA regs for
MSA, so MSACSR and MSA upper regs's value from previous task on current
cpu can leak into current task and cause unpredictable behavior when MSA
context not initialized.

Fixes: cc97ab235f ("MIPS: Simplify FP context initialization")
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-09-03 12:00:03 +02:00
Joerg Roedel 4819e15f74 x86/mm/32: Bring back vmalloc faulting on x86_32
One can not simply remove vmalloc faulting on x86-32. Upstream

	commit: 7f0a002b5a ("x86/mm: remove vmalloc faulting")

removed it on x86 alltogether because previously the
arch_sync_kernel_mappings() interface was introduced. This interface
added synchronization of vmalloc/ioremap page-table updates to all
page-tables in the system at creation time and was thought to make
vmalloc faulting obsolete.

But that assumption was incredibly naive.

It turned out that there is a race window between the time the vmalloc
or ioremap code establishes a mapping and the time it synchronizes
this change to other page-tables in the system.

During this race window another CPU or thread can establish a vmalloc
mapping which uses the same intermediate page-table entries (e.g. PMD
or PUD) and does no synchronization in the end, because it found all
necessary mappings already present in the kernel reference page-table.

But when these intermediate page-table entries are not yet
synchronized, the other CPU or thread will continue with a vmalloc
address that is not yet mapped in the page-table it currently uses,
causing an unhandled page fault and oops like below:

	BUG: unable to handle page fault for address: fe80c000
	#PF: supervisor write access in kernel mode
	#PF: error_code(0x0002) - not-present page
	*pde = 33183067 *pte = a8648163
	Oops: 0002 [#1] SMP
	CPU: 1 PID: 13514 Comm: cve-2017-17053 Tainted: G
	...
	Call Trace:
	 ldt_dup_context+0x66/0x80
	 dup_mm+0x2b3/0x480
	 copy_process+0x133b/0x15c0
	 _do_fork+0x94/0x3e0
	 __ia32_sys_clone+0x67/0x80
	 __do_fast_syscall_32+0x3f/0x70
	 do_fast_syscall_32+0x29/0x60
	 do_SYSENTER_32+0x15/0x20
	 entry_SYSENTER_32+0x9f/0xf2
	EIP: 0xb7eef549

So the arch_sync_kernel_mappings() interface is racy, but removing it
would mean to re-introduce the vmalloc_sync_all() interface, which is
even more awful. Keep arch_sync_kernel_mappings() in place and catch
the race condition in the page-fault handler instead.

Do a partial revert of above commit to get vmalloc faulting on x86-32
back in place.

Fixes: 7f0a002b5a ("x86/mm: remove vmalloc faulting")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200902155904.17544-1-joro@8bytes.org
2020-09-03 11:23:35 +02:00
Arvind Sankar aef0148f36 x86/cmdline: Disable jump tables for cmdline.c
When CONFIG_RETPOLINE is disabled, Clang uses a jump table for the
switch statement in cmdline_find_option (jump tables are disabled when
CONFIG_RETPOLINE is enabled). This function is called very early in boot
from sme_enable() if CONFIG_AMD_MEM_ENCRYPT is enabled. At this time,
the kernel is still executing out of the identity mapping, but the jump
table will contain virtual addresses.

Fix this by disabling jump tables for cmdline.c when AMD_MEM_ENCRYPT is
enabled.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200903023056.3914690-1-nivedita@alum.mit.edu
2020-09-03 10:59:16 +02:00
Peter Ujfalusi 46815bf4d5 dmaengine: ti: k3-udma: Update rchan_oes_offset for am654 SYSFW ABI 3.0
SYSFW ABI 3.0 has changed the rchan_oes_offset value for am654 to support
SR2.

Since the kernel now needs SYSFW API 3.0 to work because the merged irqchip
update, we need to also update the am654 rchan_oes_offset.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200831091019.25273-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-03 12:53:53 +05:30
Ben Skeggs ca386aa715 drm/nouveau/kms/nv50-gp1xx: add WAR for EVO push buffer HW bug
Thanks to NVIDIA for confirming this workaround, and clarifying which HW
is affected.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
2020-09-03 15:32:24 +10:00
Ben Skeggs a9cfcfcad5 drm/nouveau/kms/nv50-gp1xx: disable notifies again after core update
This was lost during the header conversion.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-09-03 15:32:23 +10:00
Ben Skeggs 35dde8d406 drm/nouveau/kms/nv50-: add some whitespace before debug message
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-09-03 15:32:23 +10:00
Lyude Paul a255e9c869 drm/nouveau/kms/gv100-: Include correct push header in crcc37d.c
Looks like when we converted everything over to Nvidia's class headers,
we mistakenly included the nvif/push507b.h instead of nvif/pushc37b.h,
which resulted in breaking CRC reporting for volta+:

nouveau 0000:1f:00.0: disp: chid 0 stat 10003361 reason 3
[RESERVED_METHOD] mthd 0d84 data 00000000 code 00000000
nouveau 0000:1f:00.0: disp: chid 0 stat 10003360 reason 3
[RESERVED_METHOD] mthd 0d80 data 00000000 code 00000000
nouveau 0000:1f:00.0: DRM: CRC notifier ctx for head 3 not finished
after 50ms

So, fix that.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: c4b27bc868 ("drm/nouveau/kms/nv50-: convert core crc_set_src() to new push macros")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-09-03 15:32:23 +10:00
Kai-Heng Feng fc8c70526b drm/radeon: Prefer lower feedback dividers
Commit 2e26ccb119 ("drm/radeon: prefer lower reference dividers")
fixed screen flicker for HP Compaq nx9420 but breaks other laptops like
Asus X50SL.

Turns out we also need to favor lower feedback dividers.

Users confirmed this change fixes the regression and doesn't regress the
original fix.

Fixes: 2e26ccb119 ("drm/radeon: prefer lower reference dividers")
BugLink: https://bugs.launchpad.net/bugs/1791312
BugLink: https://bugs.launchpad.net/bugs/1861554
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-03 00:37:30 -04:00
Sandeep Raghuraman d98299885c drm/amdgpu: Fix bug in reporting voltage for CIK
On my R9 390, the voltage was reported as a constant 1000 mV.
This was due to a bug in smu7_hwmgr.c, in the smu7_read_sensor()
function, where some magic constants were used in a condition,
to determine whether the voltage should be read from PLANE2_VID
or PLANE1_VID. The VDDC mask was incorrectly used, instead of
the VDDGFX mask.

This patch changes the code to use the correct defined constants
(and apply the correct bitshift), thus resulting in correct voltage reporting.

Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-03 00:37:14 -04:00
Sandeep Raghuraman f7b2e34b4a drm/amdgpu: Specify get_argument function for ci_smu_funcs
Starting in Linux 5.8, the graphics and memory clock frequency were not being
reported for CIK cards. This is a regression, since they were reported correctly
in Linux 5.7.

After investigation, I discovered that the smum_send_msg_to_smc() function,
attempts to call the corresponding get_argument() function of ci_smu_funcs.
However, the get_argument() function is not defined in ci_smu_funcs.

This patch fixes the bug by specifying the correct get_argument() function.

Fixes: a0ec225633 ("drm/amd/powerplay: unified interfaces for message issuing and response checking")
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2020-09-03 00:36:37 -04:00
Jiansong Chen 33286b793b drm/amd/pm: enable MP0 DPM for sienna_cichlid
Enable MP0 clock DPM for sienna_cichlid.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-03 00:36:02 -04:00
Evan Quan 971df65cbf drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp setting
Normally softwareshutdowntemp should be greater than Thotspotlimit.
However, on some VEGA10 ASIC, the softwareshutdowntemp is 91C while
Thotspotlimit is 105C. This seems not right and may trigger some
false alarms.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2020-09-03 00:35:09 -04:00
Kevin Wang 7c62235b95 drm/amd/pm: fix is_dpm_running() run error on 32bit system
v1:
the C type "unsigned long" size is 32bit on 32bit system,
it will cause code logic error, so replace it with "uint64_t".

v2:
remove duplicate cast operation.

Signed-off-by: Kevin <kevin1.wang@amd.com>
Suggest-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-03 00:33:16 -04:00
Denis Efremov 163e0c27fe kconfig: remove redundant assignment prompt = prompt
Semi-automatic removing of localization macros changed the line
from "prompt = _(prompt);" to "prompt = prompt;". Drop the
reduntand assignment.

Fixes: 694c49a7c0 ("kconfig: drop localization support")
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-09-03 12:21:22 +09:00
Randy Dunlap b26ff488b5 kbuild: Documentation: clean up makefiles.rst
This is a general cleanup of kbuild/makefiles.rst:

* Use "Chapter" for major heading references and use "section" for
  the next-level heading references, for consistency.
* Section 3.8 was deleted long ago.
* Drop the ending ':' in section names in the contents list.
* Correct some section numbering references.
* Correct verb agreement typo.
* Fix run-on sentence punctuation.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-09-03 12:21:22 +09:00
Randy Dunlap a73fbfce2c kconfig: streamline_config.pl: check defined(ENV variable) before using it
A user reported:
'Use of uninitialized value $ENV{"LMC_KEEP"} in split at
 ./scripts/kconfig/streamline_config.pl line 596.'

so first check that $ENV{LMC_KEEP} is defined before trying
to use it.

Fixes: c027b02d89 ("streamline_config.pl: add LMC_KEEP to preserve some kconfigs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-09-03 12:16:30 +09:00
Ming Lei 7e24969022 block: allow for_each_bvec to support zero len bvec
Block layer usually doesn't support or allow zero-length bvec. Since
commit 1bdc76aea1 ("iov_iter: use bvec iterator to implement
iterate_bvec()"), iterate_bvec() switches to bvec iterator. However,
Al mentioned that 'Zero-length segments are not disallowed' in iov_iter.

Fixes for_each_bvec() so that it can move on after seeing one zero
length bvec.

Fixes: 1bdc76aea1 ("iov_iter: use bvec iterator to implement iterate_bvec()")
Reported-by: syzbot <syzbot+61acc40a49a3e46e25ea@syzkaller.appspotmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg2262077.html
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-02 20:59:40 -06:00
Dan Murphy 8b4a11c67d net: dp83867: Fix WoL SecureOn password
Fix the registers being written to as the values were being over written
when writing the same registers.

Fixes: caabee5b53 ("net: phy: dp83867: support Wake on LAN")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02 16:04:59 -07:00
Louis Peens f614e53670 nfp: flower: fix ABI mismatch between driver and firmware
Fix an issue where the driver wrongly detected ipv6 neighbour updates
from the NFP as corrupt. Add a reserved field on the kernel side so
it is similar to the ipv4 version of the struct and has space for the
extra bytes from the card.

Fixes: 9ea9bfa122 ("nfp: flower: support ipv6 tunnel keep-alive messages from fw")
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02 16:00:13 -07:00
Tetsuo Handa 2a63866c8b tipc: fix shutdown() of connectionless socket
syzbot is reporting hung task at nbd_ioctl() [1], for there are two
problems regarding TIPC's connectionless socket's shutdown() operation.

----------
#include <fcntl.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <linux/nbd.h>
#include <unistd.h>

int main(int argc, char *argv[])
{
        const int fd = open("/dev/nbd0", 3);
        alarm(5);
        ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0));
        ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */
        return 0;
}
----------

One problem is that wait_for_completion() from flush_workqueue() from
nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when
nbd_start_device_ioctl() received a signal at wait_event_interruptible(),
for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from
nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl()
is failing to wake up a WQ thread sleeping at wait_woken() from
tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from
nbd_read_stat() from recv_work() scheduled by nbd_start_device() from
nbd_start_device_ioctl(). Fix this problem by always invoking
sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is
called.

The other problem is that tipc_wait_for_rcvmsg() cannot return when
tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to
SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg()
needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this
problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown()
does) when the socket is connectionless.

[1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b2

Reported-by: syzbot <syzbot+e36f41d207137b5d12f7@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02 15:49:30 -07:00
Ido Schimmel 05d4487197 ipv6: Fix sysctl max for fib_multipath_hash_policy
Cited commit added the possible value of '2', but it cannot be set. Fix
it by adjusting the maximum value to '2'. This is consistent with the
corresponding IPv4 sysctl.

Before:

# sysctl -w net.ipv6.fib_multipath_hash_policy=2
sysctl: setting key "net.ipv6.fib_multipath_hash_policy": Invalid argument
net.ipv6.fib_multipath_hash_policy = 2
# sysctl net.ipv6.fib_multipath_hash_policy
net.ipv6.fib_multipath_hash_policy = 0

After:

# sysctl -w net.ipv6.fib_multipath_hash_policy=2
net.ipv6.fib_multipath_hash_policy = 2
# sysctl net.ipv6.fib_multipath_hash_policy
net.ipv6.fib_multipath_hash_policy = 2

Fixes: d8f74f0975 ("ipv6: Support multipath hashing on inner IP pkts")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02 15:44:53 -07:00
Xie He 2b7bcd967a drivers/net/wan/hdlc: Change the default of hard_header_len to 0
Change the default value of hard_header_len in hdlc.c from 16 to 0.

Currently there are 6 HDLC protocol drivers, among them:

hdlc_raw_eth, hdlc_cisco, hdlc_ppp, hdlc_x25 set hard_header_len when
attaching the protocol, overriding the default. So this patch does not
affect them.

hdlc_raw and hdlc_fr don't set hard_header_len when attaching the
protocol. So this patch will change the hard_header_len of the HDLC
device for them from 16 to 0.

This is the correct change because both hdlc_raw and hdlc_fr don't have
header_ops, and the code in net/packet/af_packet.c expects the value of
hard_header_len to be consistent with header_ops.

In net/packet/af_packet.c, in the packet_snd function,
for AF_PACKET/DGRAM sockets it would reserve a headroom of
hard_header_len and call dev_hard_header to fill in that headroom,
and for AF_PACKET/RAW sockets, it does not reserve the headroom and
does not call dev_hard_header, but checks if the user has provided a
header of length hard_header_len (in function dev_validate_header).

Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02 15:42:43 -07:00
Dan Carpenter eb0f3bc463 net: gemini: Fix another missing clk_disable_unprepare() in probe
We recently added some calls to clk_disable_unprepare() but we missed
the last error path if register_netdev() fails.

I made a couple cleanups so we avoid mistakes like this in the future.
First I reversed the "if (!ret)" condition and pulled the code in one
indent level.  Also, the "port->netdev = NULL;" is not required because
"port" isn't used again outside this function so I deleted that line.

Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02 15:40:18 -07:00
Linus Torvalds fc3abb5325 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:

 - data sanitization and validtion fixes for report descriptor parser
   from Marc Zyngier

 - memory leak fix for hid-elan driver from Dinghao Liu

 - two device-specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: core: Sanitize event code and type when mapping input
  HID: core: Correctly handle ReportSize being zero
  HID: elan: Fix memleak in elan_input_configured
  HID: microsoft: Add rumble support for the 8bitdo SN30 Pro+ controller
  HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devices
2020-09-02 12:55:46 -07:00
Denis Efremov 1996cf46e4 net: bcmgenet: fix mask check in bcmgenet_validate_flow()
VALIDATE_MASK(eth_mask->h_source) is checked twice in a row in
bcmgenet_validate_flow(). Add VALIDATE_MASK(eth_mask->h_dest)
instead.

Fixes: 3e37095228 ("net: bcmgenet: add support for ethtool rxnfc flows")
Signed-off-by: Denis Efremov <efremov@linux.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02 12:54:12 -07:00
Shyam Sundar S K 7deedd9f0e amd-xgbe: Add support for new port mode
Add support for a new port mode that is a backplane connection without
support for auto negotiation.

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02 12:47:50 -07:00
Linus Torvalds c3a1309564 - DM writecache fix to allow dax_direct_access() to partitioned pmem
devices.
 
 - DM multipath fix to avoid any Path Group initialization if
   'pg_init_in_progress' isn't set.
 
 - DM crypt fix to use DECLARE_CRYPTO_WAIT() for onstack wait
   structures.
 
 - DM integrity fix to properly check integrity after device creation
   when in bitmap mode.
 
 - DM thinp and cache target __create_persistent_data_objects() fixes
   to reset the metadata's dm_block_manager pointer from PTR_ERR to
   NULL before returning from error path.
 
 - DM persistent-data block manager fix to guard against
   dm_block_manager NULL pointer dereference in dm_bm_is_read_only()
   and update various opencoded bm->read_only checks to use
   dm_bm_is_read_only() instead.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl9P3HkTHHNuaXR6ZXJA
 cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWuZNCAC54BvltTjazZ/NSnpcmd2NuT+ZeFgp
 uOVrc7BHJGbTKGbdJAnB75Y6B3CYYfzx7TbOyxrzS1dMFZ9C37VR68iSm+PF7bPU
 EZGZ7uXShs49XYcstfHOW+fE1CZTk1YkK4iQ6LkcxFqegByAW/9VRKQn6kLlAVII
 IG1CdRpAj94+GvEyTMsrci65v/wTGNnap5mEsE6DsnM7WGo2PEOXQglgpjyvkj6Z
 x27SVzSzneri4Rk6ImbsSHB6Y0J0OWyWkumUPoQUw8kCebyp0SJezz6iJHfjF/ZM
 tCdQJhA2Xt/+ksa1SnRYXOYmeF5l8gS6EjV4YnrK8k2KUnKIiGPb2LBo
 =g6yq
 -----END PGP SIGNATURE-----

Merge tag 'for-5.9/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - writecache fix to allow dax_direct_access() to partitioned pmem
   devices.

 - multipath fix to avoid any Path Group initialization if
   'pg_init_in_progress' isn't set.

 - crypt fix to use DECLARE_CRYPTO_WAIT() for onstack wait structures.

 - integrity fix to properly check integrity after device creation when
   in bitmap mode.

 - thinp and cache target __create_persistent_data_objects() fixes to
   reset the metadata's dm_block_manager pointer from PTR_ERR to NULL
   before returning from error path.

 - persistent-data block manager fix to guard against dm_block_manager
   NULL pointer dereference in dm_bm_is_read_only() and update various
   opencoded bm->read_only checks to use dm_bm_is_read_only() instead.

* tag 'for-5.9/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm thin metadata: Fix use-after-free in dm_bm_set_read_only
  dm thin metadata:  Avoid returning cmd->bm wild pointer on error
  dm cache metadata: Avoid returning cmd->bm wild pointer on error
  dm integrity: fix error reporting in bitmap mode after creation
  dm crypt: Initialize crypto wait structures
  dm mpath: fix racey management of PG initialization
  dm writecache: handle DAX to partitions on persistent memory correctly
2020-09-02 11:59:49 -07:00
Linus Torvalds e1d0126ca3 Fixes for 5.9:
- Avoid a log recovery failure for an insert range operation by rolling
 deferred ops incrementally instead of at the end.
 - Fix an off-by-one error when calculating log space reservations for
 anything involving an inode allocation or free.
 - Fix a broken shortform xattr verifier.
 - Ensure that the shortform xattr header padding is always initialized
 to zero.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl9H1PkACgkQ+H93GTRK
 tOsfXA//QYUtx6BccgiXGJCJ7dkOJwM+2aKS1kvadfJlN6hZh7x6jzi424qsBHbH
 jfNGcGjlrvFp3MAex3w+LeQFEK9gX47mKXGVR8MakWjo/khuxNoqpx4rzFI+wdMS
 Sh51f9ovbsZIRrKHPv9YrxBUhO3yzbWbz2bbWYAV1/kN4jxdzKNByVrhIn97yFsg
 NOj9uh1R3UsD1IKez9FeMKwYt/6jXZKs/LzroBKGxcBvdEu99X4vpD9WBqghe0Ye
 e57rf+zb5b5M0ydOp9mEme8wogQcLKmMPgNaZXzduPuhx8GtsqZ4gTKoIpRSBCWA
 z5oVerIr2jMN4+OMOaBWrEI34kRFUh5KG0Z0U4uOLavm04//KfQ3zUWAyea20Gmg
 rkq4me7DJk0cVmWlJkB9X4LbR4OjeS7ANqvM94AmcYVHzxw76O/UhgMYXBgBin2J
 4egsiXVi+Pii5Syw7kU9dTxWETP9mlN+2yO1CQdW0HgFnCJ3ARng0hdJBftQEIVo
 Rec/YmpE9Mi7QSRjfp+I+30ZPNMl3lHMIfAVEj2Nhn32do5l6h9ZN4XP5OSQyqa6
 yoNAi2oB1lqPaiV1/N2hRZwbxIexzeAZZSkGKGpiF/g9u5nwDTGRxVOmc/vTSGVN
 7swYctIl9HuzIAuLGU3d8yCj6FnWvzNM6JGM0GDPi8ZFBqezhY4=
 =9IZj
 -----END PGP SIGNATURE-----

Merge tag 'xfs-5.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
 "Various small corruption fixes that have come in during the past
  month:

   - Avoid a log recovery failure for an insert range operation by
     rolling deferred ops incrementally instead of at the end.

   - Fix an off-by-one error when calculating log space reservations for
     anything involving an inode allocation or free.

   - Fix a broken shortform xattr verifier.

   - Ensure that the shortform xattr header padding is always
     initialized to zero"

* tag 'xfs-5.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: initialize the shortform attr header padding entry
  xfs: fix boundary test in xfs_attr_shortform_verify
  xfs: fix off-by-one in inode alloc block reservation calculation
  xfs: finish dfops on every insert range shift iteration
2020-09-02 11:42:18 -07:00
Linus Torvalds 54e54d5818 Merge branch 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull epoll fixup from Al Viro:
 "Fixup for epoll regression; there's a better solution longer term, but
  this is the least intrusive fix"

* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix regression in "epoll: Keep a reference on files added to the check list"
2020-09-02 11:29:34 -07:00
Ye Bin 3a653b205f dm thin metadata: Fix use-after-free in dm_bm_set_read_only
The following error ocurred when testing disk online/offline:

[  301.798344] device-mapper: thin: 253:5: aborting current metadata transaction
[  301.848441] device-mapper: thin: 253:5: failed to abort metadata transaction
[  301.849206] Aborting journal on device dm-26-8.
[  301.850489] EXT4-fs error (device dm-26) in __ext4_new_inode:943: Journal has aborted
[  301.851095] EXT4-fs (dm-26): Delayed block allocation failed for inode 398742 at logical offset 181 with max blocks 19 with error 30
[  301.854476] BUG: KASAN: use-after-free in dm_bm_set_read_only+0x3a/0x40 [dm_persistent_data]

Reason is:

 metadata_operation_failed
    abort_transaction
        dm_pool_abort_metadata
	    __create_persistent_data_objects
	        r = __open_or_format_metadata
	        if (r) --> If failed will free pmd->bm but pmd->bm not set NULL
		    dm_block_manager_destroy(pmd->bm);
    set_pool_mode
	dm_pool_metadata_read_only(pool->pmd);
	dm_bm_set_read_only(pmd->bm);  --> use-after-free

Add checks to see if pmd->bm is NULL in dm_bm_set_read_only and
dm_bm_set_read_write functions.  If bm is NULL it means creating the
bm failed and so dm_bm_is_read_only must return true.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-02 13:38:40 -04:00
Ye Bin 219403d7e5 dm thin metadata: Avoid returning cmd->bm wild pointer on error
Maybe __create_persistent_data_objects() caller will use PTR_ERR as a
pointer, it will lead to some strange things.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-02 13:38:31 -04:00
Ye Bin d16ff19e69 dm cache metadata: Avoid returning cmd->bm wild pointer on error
Maybe __create_persistent_data_objects() caller will use PTR_ERR as a
pointer, it will lead to some strange things.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-02 13:38:24 -04:00
Pierre-Louis Bossart b79de57b43 ALSA: hda: use consistent HDAudio spelling in comments/docs
We use HDaudio and HDAudio, pick one to make searches easier.
No functionality change

Also fix timestamping typo in documentation.

Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902154250.1440585-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-09-02 19:31:32 +02:00
Tejun Heo 3b5455636f libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks
All three generations of Sandisk SSDs lock up hard intermittently.
Experiments showed that disabling NCQ lowered the failure rate significantly
and the kernel has been disabling NCQ for some models of SD7's and 8's,
which is obviously undesirable.

Karthik worked with Sandisk to root cause the hard lockups to trim commands
larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which
limits max trim size to 128M and applies it to all three generations of
Sandisk SSDs.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Karthik Shivaram <karthikgs@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-02 11:31:23 -06:00