Commit Graph

375111 Commits

Author SHA1 Message Date
Michel Lespinasse 1e78277ccb rwsem: move rwsem_down_failed_common code into rwsem_down_{read,write}_failed
Remove the rwsem_down_failed_common function and replace it with two
identical copies of its code in rwsem_down_{read,write}_failed.

This is because we want to make different optimizations in
rwsem_down_{read,write}_failed; we are adding this pure-duplication
step as a separate commit in order to make it easier to check the
following steps.

Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 07:20:16 -07:00
Michel Lespinasse f7dd1cee9a rwsem: shorter spinlocked section in rwsem_down_failed_common()
This change reduces the size of the spinlocked and TASK_UNINTERRUPTIBLE
sections in rwsem_down_failed_common():

- We only need the sem->wait_lock to insert ourselves on the wait_list;
  the waiter node can be prepared outside of the wait_lock.

- The task state only needs to be set to TASK_UNINTERRUPTIBLE immediately
  before checking if we actually need to sleep; it doesn't need to protect
  the entire function.

Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 07:20:16 -07:00
Michel Lespinasse e2d57f782c rwsem: make the waiter type an enumeration rather than a bitmask
We are not planning to add some new waiter flags, so we can convert the
waiter type into an enumeration.

Background: David Howells suggested I do this back when I tried adding
a new waiter type for unfair readers. However, I believe the cleanup
applies regardless of that use case.

Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 07:20:15 -07:00
Vineet Gupta eacd0e950d ARC: [mm] Lazy D-cache flush (non aliasing VIPT)
flush_dcache_page( ) is MM hook to ensure that a page has consistent
views between kernel and userspace. Thus it is called when

* kernel writes to a page which at some later point could get mapped to
  userspace (so kernel mapping needs to be flushed-n-inv)
* kernel is about to read from a page with possible userspace mappings
  (so userspace mappings needs to be made coherent with kernel ones)

However for Non aliasing VIPT dcache, any userspace mapping will always
be congruent to kernel mapping. Thus d-cache need need not be flushed at
all (or delayed indefinitely).

The only reason it does need to be flushed is when mapping code pages.
Since icache doesn't snoop dcache, those dirty dcache lines need to be
written back to memory and icache line invalidated so that icache lines
fetch will get the right data.

Decent gains on LMBench fork/exec/sh and File I/O micro-benchmarks.

(1) FPGA @ 80 MHZ

Processor, Processes - times in microseconds - smaller is better
------------------------------------------------------------------------------
Host                 OS  Mhz null null      open slct sig  sig  fork exec sh
                             call  I/O stat clos TCP  inst hndl proc proc proc
--------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
3.9-rc6-a Linux 3.9.0-r   80 4.79 8.72 66.7 116. 239. 8.39 30.4 4798 14.K 34.K
3.9-rc6-b Linux 3.9.0-r   80 4.79 8.62 65.4 111. 239. 8.35 29.0 3995 12.K 30.K
3.9-rc7-c Linux 3.9.0-r   80 4.79 9.00 66.1 106. 239. 8.61 30.4 2858 10.K 24.K
                                                                ^^^^ ^^^^ ^^^

File & VM system latencies in microseconds - smaller is better
-------------------------------------------------------------------------------
Host                 OS   0K File      10K File     Mmap    Prot   Page 100fd
                        Create Delete Create Delete Latency Fault  Fault selct
--------- ------------- ------ ------ ------ ------ ------- ----- ------- -----
3.9-rc6-a Linux 3.9.0-r  317.8  204.2 1122.3  375.1 3522.0 4.288     20.7 126.8
3.9-rc6-b Linux 3.9.0-r  298.7  223.0 1141.6  367.8 3531.0 4.866     20.9 126.4
3.9-rc7-c Linux 3.9.0-r  278.4  179.2  862.1  339.3 3705.0 3.223     20.3 126.6
                         ^^^^^  ^^^^^  ^^^^^  ^^^^

(2) Customer Silicon @ 500 MHz (166 MHz mem)

------------------------------------------------------------------------------
Host                 OS  Mhz null null      open slct sig  sig  fork exec sh
                             call  I/O stat clos TCP  inst hndl proc proc proc
--------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
abilis-ba Linux 3.9.0-r  497 0.71 1.38 4.58 12.0 35.5 1.40 3.89 2070 5525 13.K
abilis-ca Linux 3.9.0-r  497 0.71 1.40 4.61 11.8 35.6 1.37 3.92 1411 4317 10.K
                                                                ^^^^ ^^^^ ^^^

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 19:08:15 +05:30
Vineet Gupta 764531cc5a ARC: [mm] micro-optimize page size icache invalidate
start address is already page aligned and size is const PAGE_SIZE,
thus fixups for alignment not needed in generated code.

bloat-o-meter vmlinux-mm5 vmlinux
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-32 (-32)
function                                     old     new   delta
__inv_icache_page                             82      50     -32

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 19:08:14 +05:30
Vineet Gupta 7f250a0fa1 ARC: [mm] remove the pessimistic all-alias-invalidate icache helpers
No users of this code anymore - so RIP !

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 19:08:13 +05:30
Vineet Gupta 94bad1afee ARC: [mm] consolidate icache/dcache sync code
Now that we have same helper used for all icache invalidates (i.e.
vaddr+paddr based exact line invalidate), consolidate the open coded
calls into one place.

Also rename flush_icache_range_vaddr => __sync_icache_dcache

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 19:08:13 +05:30
Vineet Gupta 7586bf7286 ARC: [mm] optimise icache flush for kernel mappings
This change continues the theme from prev commit - this time icache
handling for kernel's own code modification (vmalloc: loadable modules,
breakpoints for kprobes/kgdb...)

flush_icache_range() calls the CDU icache helper with vaddr to enable
exact line invalidate.

For a true kernel-virtual mapping, the vaddr is actually virtual hence
valid as index into cache. For kprobes breakpoint however, the vaddr arg
is actually paddr - since that's how normal kernel is mapped in ARC
memory map.  This implies that CDU will use the same addr for
indexing as for tag match - which is fine since kernel code would only
have that "implicit" mapping and none other.

This should speed up module loading significantly - specially on default
ARC700 icache configurations (32k) which alias.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 19:08:12 +05:30
Vineet Gupta 24603fdd19 ARC: [mm] optimise icache flush for user mappings
ARC icache doesn't snoop dcache thus executable pages need to be made
coherent before mapping into userspace in flush_icache_page().

However ARC700 CDU (hardware cache flush module) requires both vaddr
(index in cache) as well as paddr (tag match) to correctly identify a
line in the VIPT cache. A typical ARC700 SoC has aliasing icache, thus
the paddr only based flush_icache_page() API couldn't be implemented
efficiently. It had to loop thru all possible alias indexes and perform
the invalidate operation (ofcourse the cache op would only succeed at
the index(es) where tag matches - typically only 1, but the cost of
visiting all the cache-bins needs to paid nevertheless).

Turns out however that the vaddr (along with paddr) is available in
update_mmu_cache() hence better suits ARC icache flush semantics.
With both vaddr+paddr, exactly one flush operation per line is done.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 19:08:12 +05:30
Arnd Bergmann 0592c2189e An urgent fix for a timer mismerge for and a regression fix for
musb device naming change.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRiEAfAAoJEBvUPslcq6VzlGkP/18oOliFR+/vmamNhbNbkJLQ
 Ab7S+zoMD+4Bpwio8uLNNyrj9RWVYz5aWPGzGgbykpvsznmq+6Ynbz/hxNfhk/Vk
 KVVvtrWY+weClIc0Brw6dCVTaJAyYwFIYS0YXsQ1CpubDzz7jDWUplLXuy8tq0MA
 9fMOcRwX1oPzBivDzAVcdLLEFzqXX56vQHUIj9Os9eqhv6S4YeVn+iIwBevviBV4
 Ng8r79VaQYYG94+1QtO2tg2OqzgCk1yZKA3PjXmmy7yBUh9hjbPN155dRWtwP7kC
 znB5xzGUrmFdtzn3eCPN6Zn4I1BLZmFYB5M1Cm/rMwjqKCkYp8laQDtaZhsLpazy
 2EFwSQRgV9pwZOpkPHy7728OYTTQ8n0F1B54oU9UNzGnKGGAXCKTMImUyY0bQnKE
 wbdvvrGlGiG0DymWZNoEAuYC/jNwqlhk+ZqbhOWF17DiVVfdNjOjC6nOkPhnJzSB
 jCR51j9AAn2A/LXOfUIAOqwX/BXcNMDWl0Bz7+sy3UxsZ1TG1vv1oSTFLVLcJxXd
 lNKUE69FVYmzNlnnIggPrkQSLfWvFPY5/2XEkYKpdrwNB9sfTT0NmQeybEeV91sQ
 5NwlOaOGAUKs+vf1x0RmVXnzUU7mOXozrxNZl++9e1hh59s8l6zfy07rUePX3ojC
 4ZXc+5P3HARUdif3n3G0
 =FjKm
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.10/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/cleanup

From Tony Lindgren <tony@atomide.com>:

An urgent fix for a timer mismerge for and a regression fix for
musb device naming change.

* tag 'omap-for-v3.10/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4: change the device names in usb_bind_phy
  ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-05-07 14:47:17 +02:00
Vineet Gupta 8d56bec2f2 ARC: [mm] optimize needless full mm TLB flush on munmap
munmap ends up calling tlb_flush() which for ARC was flushing the entire
TLB unconditionally (by moving the MMU to a new ASID)

do_munmap
  unmap_region
    unmap_vmas
      unmap_single_vma
         unmap_page_range
            tlb_start_vma
            zap_pud_range
            tlb_end_vma()
  tlb_finish_mmu
    tlb_flush()  ---> unconditional flush_tlb_mm()

So even a single page munmap, a frequent operation when uClibc dynamic
linker (ldso) is loading the dependent shared libraries, would move the
the ASID multiple times - needlessly invalidating the pre-faulted TLB
entries (and increasing the rate of ASID wraparound + full TLB flush).

This is now optimised to only be called if tlb->full_mm (which means
for exit/execve) cases only. And for those cases, flush_tlb_mm() is
already optimised to be a no-op for mm->mm_users == 0.

So essentially there are no mmore full mm flushes - except for fork which
anyhow needs it for properly COW'ing parent address space.

munmap now needs to do TLB range flush, which is implemented with
tlb_end_vma()

Results
-------
1. ASID now consistenly moves by 4 during a simple ls (as opposed to 5 or
   7 before).

2. LMBench microbenchmark also shows improvements

Basic system parameters
------------------------------------------------------------------------------
Host                 OS Description              Mhz  tlb  cache  mem scal
                                                     pages line   par load
                                                           bytes
--------- ------------- ----------------------- ---- ----- ----- ------ ----
3.9-rc5-0 Linux 3.9.0-r 3.9-rc5-0404-gcc-4.4-ba   80     8    64 1.1000 1
3.9-rc5-0 Linux 3.9.0-r 3.9-rc5-0405-avoid-full   80     8    64 1.1200 1

Processor, Processes - times in microseconds - smaller is better
------------------------------------------------------------------------------
Host                 OS  Mhz null null      open slct sig  sig  fork exec sh
                             call  I/O stat clos TCP  inst hndl proc proc proc
--------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
3.9-rc5-0 Linux 3.9.0-r   80 4.81 8.69 68.6 118. 239. 8.53 31.6 4839 13.K 34.K
3.9-rc5-0 Linux 3.9.0-r   80 4.46 8.36 53.8 91.3 223. 8.12 24.2 4725 13.K 33.K

File & VM system latencies in microseconds - smaller is better
-------------------------------------------------------------------------------
Host                 OS   0K File      10K File     Mmap    Prot   Page 100fd
                        Create Delete Create Delete Latency Fault  Fault selct
--------- ------------- ------ ------ ------ ------ ------- ----- ------- -----
3.9-rc5-0 Linux 3.9.0-r  314.7  223.2 1054.9  390.2  3615.0 1.590 20.1 126.6
3.9-rc5-0 Linux 3.9.0-r  265.8  183.8 1014.2  314.1  3193.0 6.910 18.8 110.4

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:44:00 +05:30
Mischa Jonker a92a5d0dce ARC: Add support for nSIM OSCI System C model
This adds support for an ARC Virtual Platform. This platform is based on the
System C standard promoted by the OSCI (Open System C Initiative) and uses
nSIM to simulate the ARC CPU core itself.

Users can build a virtual SoC by combining System C models of peripherals
and CPU cores.

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:44:00 +05:30
Christian Ruppert 0dfad77d0a ARC: [TB10x] Adapt device tree to new compatible string
The original device tree was written using a slightly different
implementation of the fixed-factor-clock device tree binding. The
compatible string must be modified in order to be compatible with the
new implementation.

Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:59 +05:30
Christian Ruppert 072eb69390 ARC: [TB10x] Add support for TB10x platform
Infrastructure required to make the Linux kernel compile and boot on the
Abilis Systems TB10x series of SOCs based on ARC700 CPUs:
  - Kmake related files (Kconfig, Makefile, tb10x_defconfig)
  - TB10x platform initialisation

Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:59 +05:30
Christian Ruppert 2eb9504bcc ARC: [TB10x] Device tree of TB100 and TB101 Development Kits
These are the device tree files for the Abilis Systems TB100 and TB101 ICs and
their respective development kit PCBs. These files are committed in preparation
of the following patch set which adds support for these chips to the ARC
platform.

Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:58 +05:30
Christian Ruppert a37cdacc9b ARC: Prepare interrupt code for external controllers
This patch adds some room for CPU-external interrupt controllers in the
Linux interrupt space. Until now, only the 32 CPU internal interrupt lines
were supported which does not allow for external interrupt controllers such
as GPIO modules etc.

Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:58 +05:30
Vineet Gupta c93d8b8c78 ARC: Allow embedded arc-intc to be properly placed in DT intc hierarchy
arc-intc is initialized in arc common code as it is applicable to all
platforms. However platforms with their own external intc still need to
refer to it for correct DT interrupt tree hierarchy setup,

e.g.
static struct of_device_id __initdata tb10x_irq_ids[] = {
	{ .compatible = "snps,arc700-intc", .data = dummy_init_irq },
	{ .compatible = "abilis,tb10x_ictl", .data = tb10x_init_irq },
	{},
};

The fix is to use the generic irqchip framework to tie all irqchips in
a special linker section and then call irqchip_init() which calls the
DT of_irq_init() for all the intc in one go.

That way the platform code need not be aware of arc-intc at all.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:57 +05:30
Vineet Gupta 9593a933d5 ARC: [cmdline] Don't overwrite u-boot provided bootargs
The existing code was wrong on several counts:

* uboot provided bootargs were copied into @boot_command_line, only to
  be over-written by setup_machine_fdt(), effectively lost

* @cmdline_p returned by setup_arch() to start_kernel() didn't include
  the DT /bootargs

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:57 +05:30
Vineet Gupta 6971881f2a ARC: [cmdline] Remove CONFIG_CMDLINE
Given that DeviceTree /bootargs can provide similar functionality,
no point in providing duplicate infrastructure.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:56 +05:30
Vineet Gupta 330db3330a ARC: [plat-arcfpga] defconfig update
* Allow initramfs path to be symlink
* CONFIG_PREEMPT be default

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:56 +05:30
Vineet Gupta ce147c7445 ARC: unaligned access emulation broken if callee-reg dest of LD/ST
The fixup code correctly updates the callee-regs on stack, but
fails to unwind it into actual register file. Thus userspace won't see
the update.

Reported-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:55 +05:30
Vineet Gupta c723ea4620 ARC: unaligned access emulation error handling consolidation
If CONFIG_ARC_MISALIGN_ACCESS is not enabled, or if the fixup fails,
call the same error handler: same signal/si_code to user (SIGBUS)

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:55 +05:30
Vineet Gupta bd3c8b11ec ARC: Debug/crash-printing Improvements
* Remove the line-break between scratch/callee-regs (sneaked in when we
  converted from printk to pr_*

* Use %pS to print the symbol names of faulting PC (ret pseudo register)
  and BLINK (call return register)

* Don't print user-vma for a kernel crash (only do it for
  print-fatal-signals based regfile dump)

* Verbose print the Interrupt/Exception Enable/Active state

* for main executable link address is 0x10000 based (vs. 0) thus offset
  of faulting PC needs to be adjusted

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:54 +05:30
Noam Camus 68e4790ec4 ARC: fix typo with clock speed
Signed-off-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:54 +05:30
Noam Camus e3edeb67fb ARC: Respect the cpu_id passed for fetching correct cpu info
Signed-off-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:54 +05:30
Alexander Shiyan 0e82284514 ARC: Remove non existent refs to GENERIC_KERNEL_EXECVE & GENERIC_KERNEL_THREAD
This tracks mainline commit ae903caae2 "Bury the conditionals from
kernel_thread/kernel_execve series" which we missed out as ARC port was
not yet mainline.

[vgupta: commit log modified]

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:53 +05:30
Asias He a18cc42164 vhost-scsi: Enable VIRTIO_RING_F_EVENT_IDX
It was disabled as a workaround. Now userspace bits work fine with it.
The broken version was not ever committed to QEMU, I guess the same is
true for nlkt.

So, let's enable it.

Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-05-07 11:11:08 +03:00
Benjamin Herrenschmidt 5737789c83 powerpc: Make hard_irq_disable() do the right thing vs. irq tracing
If hard_irq_disable() is called while interrupts are already soft-disabled
(which is the most common case) all is already well.

However you can (and in some cases want) to call it while everything is
enabled (to make sure you don't get a lazy even, for example before entry
into KVM guests) and in this case we need to inform the irq tracer that
the irqs are going off.

We have to change the inline into a macro to avoid an include circular
dependency hell hole.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-07 17:13:57 +10:00
Pekka Enberg 69df2ac128 Merge branch 'slab/next' into slab/for-linus 2013-05-07 09:19:47 +03:00
Al Viro 4385bab128 make blkdev_put() return void
same story as with the previous patches - note that return
value of blkdev_close() is lost, since there's nowhere the
caller (__fput()) could return it to.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-07 02:16:31 -04:00
Al Viro db2a144bed block_device_operations->release() should return void
The value passed is 0 in all but "it can never happen" cases (and those
only in a couple of drivers) *and* it would've been lost on the way
out anyway, even if something tried to pass something meaningful.
Just don't bother.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-07 02:16:21 -04:00
Kishon Vijay Abraham I 08a48be32f ARM: OMAP4: change the device names in usb_bind_phy
After the device names are created using PLATFORM_DEVID_AUTO, the old
device names given in usb_bind_phy are no longer valid causing the musb
controller not to get the phy reference. Updated the usb_bind_phy with
the new device names to get MUSB functional in omap4 panda.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-06 16:39:16 -07:00
Vaibhav Hiremath 626479696d ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a
Looks like the timer.c fixes in commit ff931c82 (ARM: OMAP: clocks:
Delay clk inits atleast until slab is initialized) got lost in a
merge with da4a686a (ARM: smp_twd: convert to use CLKSRC_OF init).

Without the omap_clk_init() calls none of OMAP family of devices
boot.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
[tony@atomide.com: updated comments to describe merge error]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-06 16:39:16 -07:00
Linus Torvalds 51a26ae7a1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "Just a small pile of fixes"

 1) Fix race conditions in IP fragmentation LRU list handling, from
    Konstantin Khlebnikov.

 2) vfree() is no longer verboten in interrupts, so deferring is
    pointless, from Al Viro.

 3) Conversion from mutex to semaphore in netpoll left trylock test
    inverted, caught by Dan Carpenter.

 4) 3c59x uses wrong base address when releasing regions, from Sergei
    Shtylyov.

 5) Bounds checking in TIPC from Dan Carpenter.

 6) Fastopen cookies should not be expired as aggressively as other TCP
    metrics.  From Eric Dumazet.

 7) Fix retrieval of MAC address in ibmveth, from Ben Herrenschmidt.

 8) Don't use "u16" in virtio user headers, from Stephen Hemminger

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  tipc: potential divide by zero in tipc_link_recv_fragment()
  tipc: add a bounds check in link_recv_changeover_msg()
  net/usb: new driver for RTL8152
  3c59x: fix freeing nonexistent resource on driver unload
  netpoll: inverted down_trylock() test
  rps_dev_flow_table_release(): no need to delay vfree()
  fib_trie: no need to delay vfree()
  net: frag, fix race conditions in LRU list maintenance
  tcp: do not expire TCP fastopen cookies
  net/eth/ibmveth: Fixup retrieval of MAC address
  virtio: don't expose u16 in userspace api
2013-05-06 15:51:10 -07:00
Linus Torvalds 2b69703fea Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
Pull LED subsystem updates from Bryan Wu:
 - move LED trigger drivers into a new directory
 - lp55xx common driver updates
 - other led drivers updates and bug fixing

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: leds-asic3: switch to using SIMPLE_DEV_PM_OPS
  leds: leds-bd2802: add CONFIG_PM_SLEEP to suspend/resume functions
  leds: lp55xx: configure the clock detection
  leds: lp55xx: use common clock framework when external clock is used
  leds: leds-ns2: fix oops at module removal
  leds: leds-pwm: Defer led_pwm_set() if PWM can sleep
  leds: lp55xx: fix the sysfs read operation
  leds: lm355x, lm3642: support camera LED triggers for flash and torch
  leds: add camera LED triggers
  leds: trigger: use inline functions instead of macros
  leds: tca6507: Use of_match_ptr() macro
  leds: wm8350: Complain if we fail to reenable DCDC
  leds: renesas: set gpio_request_one() flags param correctly
  leds: leds-ns2: set devm_gpio_request_one() flags param correctly
  leds: leds-lt3593: set devm_gpio_request_one() flags param correctly
  leds: leds-bd2802: remove erroneous __exit annotation
  leds: atmel-pwm: remove erroneous __exit annotation
  leds: move LED trigger drivers into new subdirectory
  leds: add new LP5562 LED driver
2013-05-06 15:41:42 -07:00
Linus Torvalds 30c67e93c5 GPIO changes for Linux 3.10
The usual selection of bug fixes and driver updates for GPIO. Nothing
 really stands out except the addition of the GRGPIO driver and some
 enhacements to ACPI support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRhuKVAAoJEEFnBt12D9kB8kUP/21N7fsCxNocqoIwX8VQPfEY
 KsXUKRstuETHERHpGCSvMuRAEy1vee9itijrmWOiQT09jztIxg3Sed3u0RCQjQEK
 mV87RdAObZzm6xTIpy5sQa1bMOlc2AzYhTDDr9f1OpU+L9XMhwq03wq/i74Zij3w
 7vq5BkBfGWF84TY5ZG1SNIvtw9P2MYoCHtJKvFyTJWAH05m2bHSfuvvn8vIdcUBL
 TuVwoeUzbYJtTJatovkh0kyMOOZEh9JVWBPBTNNLyYDmpAKQ6RwBoAi0ZznmF4mk
 gp88dj6iMHebi7UnlDQJD5crw16cRoMh0pa3EBAjYM0IVhfn8AvFIhma34wTs1Z/
 ZuWwwHeR93cQTKwMBT1OHRCPaOdjS5riAR4WJm5Tmq9dV0sjGlbwff26U1uHH8qX
 mTBA+tje4bVpSHEztmXyw0AOMUv2vid5P0F/sKtEHzfURf8Yjq8xvxyvq14T3dQQ
 /wzmdLKbzR05phft7Xxa4yzfSy46uvxyUJQQaKdU/jlay/gJFisJXJE0cOrwTOFo
 SpTCmjnacr8Tlqr04Fj8f8ZgOYrg5VAOUsVE8uY0ETWRCb7iezFw7JGE3qV1kZQk
 N1lPBbSnIwtkdMiEmyttxpFEb5PwJxX8pUP6JfNyMbMlHoZs2247SeakhRQs/OCx
 goJQEGz6eeOpvq7koiJg
 =PwUd
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux

Pull GPIO changes from Grant Likely:
 "The usual selection of bug fixes and driver updates for GPIO.  Nothing
  really stands out except the addition of the GRGPIO driver and some
  enhacements to ACPI support"

I'm pulling this despite the earlier mess.  Let's hope it compiles these
days.

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (46 commits)
  gpio: grgpio: Add irq support
  gpio: grgpio: Add device driver for GRGPIO cores
  gpiolib-acpi: introduce acpi_get_gpio_by_index() helper
  GPIO: gpio-generic: remove kfree() from bgpio_remove call
  gpio / ACPI: Handle ACPI events in accordance with the spec
  gpio: lpc32xx: Fix off-by-one valid range checking for bank
  gpio: mcp23s08: convert driver to DT
  gpio/omap: force restore if context loss is not detectable
  gpio/omap: optimise interrupt service routine
  gpio/omap: remove extra context restores in *_runtime_resume()
  gpio/omap: free irq domain in probe() failure paths
  gpio: gpio-generic: Add 16 and 32 bit big endian byte order support
  gpio: samsung: Add terminating entry for exynos_pinctrl_ids
  gpio: mvebu: add dbg_show function
  MAX7301 GPIO: Do not force SPI speed when using OF Platform
  gpio: gpio-tps65910.c: fix checkpatch error
  gpio: gpio-timberdale.c: fix checkpatch error
  gpio: gpio-tc3589x.c: fix checkpatch errors
  gpio: gpio-stp-xway.c: fix checkpatch error
  gpio: gpio-sch.c: fix checkpatch error
  ...
2013-05-06 15:40:55 -07:00
Linus Torvalds f87bb9ee62 pwm: Changes for v3.10-rc1
Nothing very exciting this time around. A couple of bug fixes and a lot
 of cleanup across the board. The DaVinci 8xx family of SoCs now use the
 same driver as the AM33xx family.
 
 Many thanks to Axel Lin and Jingoo Han who have done a great job fixing
 various bugs and inconsistencies.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRh4d9AAoJEN0jrNd/PrOhuN4P/3lAzscIkLhEqtJWlnrdvd4p
 uykggdqCgm7+tsUbXy8wICE4eSthDAoI48RTTfa/AP2KWIaF067r+HQXCqm/Stfs
 fKaoViplF5flRmbZQytkN1Ou9LKDvjtnmFrDN5+VU5Y15Dqxjk5dQz0OrfqL9a3f
 P8mH8EstjF9aoi2dd2hGft3nmsP4L4C6gNTkVim3K/jHwwh6elxn2ooBLhhKdcFB
 W7wQkvi8N190rnGlWUI1Y/uNbdxIE6VZdH56rxFIR9f9oHQPAU1wElnv/amuSYOe
 FSsJ/GAbYUXrgPWsTTd3drJrOS6BQ/2Q2fPY3ZcnfNlnSaWAy0pigVMC4Tc2MTIO
 yScrAyh7pMRtmFxsyJpW9lV0r3DMhEY97pjiSpF08tbrx6nCq8aBGvv5jrCGFUcD
 t8GkwSpDQcIRY0L/W+kJH6q0hteu2cz8khVrOvwlgNwPs9yDUSwPDB/0OT+zmXOD
 FFR350B0uZcg7Oi58JAKvKzZJmYa1LN3cbe5pznjIMf9bouO2hhGbPvvqxgRI96x
 iNV5ldGHjaLygyCnWeI/s85OQKHjUQBmrfmQotHzRPQTuGoy+/z5rSAjyOUbx2Sn
 AuZYY5haZdw5wacLJ7HuFoSZWjs37D9/YH8VlWXsEDpSPgt/2JgWCVpNa+1dP/pP
 atYCTNmfyC7QsbnysrTM
 =vWg1
 -----END PGP SIGNATURE-----

Merge tag 'for-3.10-rc1' of git://gitorious.org/linux-pwm/linux-pwm

Pull pwm changes from Thierry Reding:
 "Nothing very exciting this time around.  A couple of bug fixes and a
  lot of cleanup across the board.  The DaVinci 8xx family of SoCs now
  use the same driver as the AM33xx family.

  Many thanks to Axel Lin and Jingoo Han who have done a great job
  fixing various bugs and inconsistencies."

* tag 'for-3.10-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (27 commits)
  pwm: lpc32xx: Don't change PWM_ENABLE bit in lpc32xx_pwm_config
  pwm: lpc32xx: Properly set PWM_ENABLE bit in lpc32xx_pwm_[enable|disable]
  pwm: Constify OF match tables
  pwm: pwm-tiehrpwm: Update device-tree binding document
  pwm: pwm-tiecap: Update device-tree binding document
  pwm: puv3: Remove unused enabled filed from struct puv3_pwm_chip
  pwm: pxa: Remove PWM_ID_BASE macro
  pwm: spear: Remove unused *dev from struct spear_pwm_chip
  pwm: mxs: Remove unused *dev from struct mxs_pwm_chip
  pwm: twl: Return proper error if twl6030_pwm_enable() fails
  pwm: pxa: Remove clk_enabled field from struct pxa_pwm_chip
  pwm: imx: Remove enabled field from struct imx_chip
  pwm: twl: Add .owner to struct pwm_ops
  pwm: twl-led: Add .owner to struct pwm_ops
  pwm: atmel-tcb: Add .owner to struct pwm_ops
  pwm: ab8500: Add .owner to struct pwm_ops
  pwm: spear: Fix checking return value of clk_enable() and clk_prepare()
  pwm: tiehrpwm: Staticize non-exported symbols
  pwm: tiecap: Staticize non-exported symbols
  pwm: ab8500: Fix trivial typo in dev_err message
  ...
2013-05-06 15:32:36 -07:00
Linus Torvalds 99737982ca IOMMU Updates for Linux v3.10
The updates are mostly about the x86 IOMMUs this time. Exceptions are
 the groundwork for the PAMU IOMMU from Freescale (for a PPC platform)
 and an extension to the IOMMU group interface. On the x86 side this
 includes a workaround for VT-d to disable interrupt remapping on broken
 chipsets. On the AMD-Vi side the most important new feature is a kernel
 command-line interface to override broken information in IVRS ACPI
 tables and get interrupt remapping working this way. Besides that there
 are small fixes all over the place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRh2vAAAoJECvwRC2XARrjbjkP/jzKzeffybUpQsIJF8rs/IEt
 hSwqpGLr6WR5FdneEH9fiBIp4pyMDXmuAb/2ZNgB+DgPN3xgqmWVo4WLk7pMo3BS
 /xIz/lu7hIX3AtKt807pL9+rPdhGYEJ43Vmr4bW9x0l1kuNXy6fmMLcN5FaPKjV4
 p4hY4jOstEgtYQw4wi39/9b4FsYoipZizkOUSdtCzWwTv7jOHH7/Wra8iZyzL6Je
 1VlF/efp0ytTcwLdHOfGwPCIlZrQRtQCM4SqdAUG9bOL3ARR9Yu/0iW1295nbLzo
 CQX5CfKePvo/fGxki1jcBi+UCyxYKPosB5kCxmh4MAxCg/VzzMsaME/A73tLJa6W
 Y29bbjwPoBPMq03HX8S9R5QWY8HpFujUUp+J4TXcKuTgYEV28WfLu1uaeKD716nM
 LoXUojov7Cj8ZQZnhyu5l+XNaephBZLfw/8bM6bAxhlKXwAjmLiS5Z+srPl1GJee
 5GCV+L94JifHLZaREWh3JFsh9O3W7Wno2++c4JU32uCWJHXH7tMgs2P8n5AY9rnT
 Km1a9y6w2MF3Gg9j4y6u75m0XnFTNzYjeJMUtqVlwVhNHhgaXfuIWY63xOQCLJs1
 ThTHOjoh0VqONGobR/ywn+0ouo9X07DnWpluyFd+zY3XK0UE0NOu9XMr4i6TWxOf
 mlzWoEKxtw36XGHB/FtQ
 =MVc/
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "The updates are mostly about the x86 IOMMUs this time.

  Exceptions are the groundwork for the PAMU IOMMU from Freescale (for a
  PPC platform) and an extension to the IOMMU group interface.

  On the x86 side this includes a workaround for VT-d to disable
  interrupt remapping on broken chipsets.  On the AMD-Vi side the most
  important new feature is a kernel command-line interface to override
  broken information in IVRS ACPI tables and get interrupt remapping
  working this way.

  Besides that there are small fixes all over the place."

* tag 'iommu-updates-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (24 commits)
  iommu/tegra: Fix printk formats for dma_addr_t
  iommu: Add a function to find an iommu group by id
  iommu/vt-d: Remove warning for HPET scope type
  iommu: Move swap_pci_ref function to drivers/iommu/pci.h.
  iommu/vt-d: Disable translation if already enabled
  iommu/amd: fix error return code in early_amd_iommu_init()
  iommu/AMD: Per-thread IOMMU Interrupt Handling
  iommu: Include linux/err.h
  iommu/amd: Workaround for ERBT1312
  iommu/amd: Document ivrs_ioapic and ivrs_hpet parameters
  iommu/amd: Don't report firmware bugs with cmd-line ivrs overrides
  iommu/amd: Add ioapic and hpet ivrs override
  iommu/amd: Add early maps for ioapic and hpet
  iommu/amd: Extend IVRS special device data structure
  iommu/amd: Move add_special_device() to __init
  iommu: Fix compile warnings with forward declarations
  iommu/amd: Properly initialize irq-table lock
  iommu/amd: Use AMD specific data structure for irq remapping
  iommu/amd: Remove map_sg_no_iommu()
  iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets
  ...
2013-05-06 14:59:13 -07:00
Arnd Bergmann 241a987126 Merge branch 'exynos/pwm-clocksource' into late/multiplatform
This series from Tomasz Figa restores support for the pwm clocksource
in Exynos, which was broken during the conversion of the platform
to the common clk framework. The clocksource is only used in one
board in the mainline kernel (universal_c210), and this makes it
work for DT based probing as well as restoring the non-DT based
case.

* exynos/pwm-clocksource:
  ARM: dts: exynops4210: really add universal_c210 dts
  ARM: dts: exynos4210: Add basic dts file for universal_c210 board
  ARM: dts: exynos4: Add node for PWM device
  ARM: SAMSUNG: Do not register legacy timer interrupts on Exynos
  clocksource: samsung_pwm_timer: Work around rounding errors in clockevents core
  clocksource: samsung_pwm_timer: Correct programming of clock events
  clocksource: samsung_pwm_timer: Use proper clockevents max_delta
  clocksource: samsung_pwm_timer: Add support for non-DT platforms
  clocksource: samsung_pwm_timer: Drop unused samsung_pwm struct
  clocksource: samsung_pwm_timer: Keep all driver data in a structure
  clocksource: samsung_pwm_timer: Make PWM spinlock global
  clocksource: samsung_pwm_timer: Let platforms select the driver
  Documentation: Add device tree bindings for Samsung PWM timers
  clocksource: add samsung pwm timer driver

Conflicts:
	arch/arm/boot/dts/Makefile
	arch/arm/mach-exynos/common.c
	drivers/clocksource/Kconfig
	drivers/clocksource/Makefile

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-05-06 23:49:09 +02:00
Arnd Bergmann 442a33ebce Merge branch 'late/clksrc' into late/cleanup
There is no reason to keep the clksrc cleanups separate from the
other cleanups, and this resolves some merge conflicts.

Conflicts:
	arch/arm/mach-spear/spear13xx.c
	drivers/irqchip/Makefile
2013-05-06 23:43:45 +02:00
Andreas Schwab 22fc4273c7 Fix cleaning in scripts/mod
Make sure devicetable-offsets.h is cleaned in the scripts/mod directory

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-05-06 23:40:54 +02:00
Arnd Bergmann 4183bef2e0 Merge branch 'late/dt' into next/dt2
This is support for the ARM Chromebook, originally scheduled
as a "late" pull request. Since it's already late now, we
can combine this into the existing next/dt2 branch.

* late/dt:
  ARM: exynos: dts: cros5250: add EC device
  ARM: dts: Add sbs-battery for exynos5250-snow
  ARM: dts: Add i2c-arbitrator bus for exynos5250-snow
  ARM: dts: Add chip-id controller node on Exynos4/5 SoC
  ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree
2013-05-06 23:38:00 +02:00
Weston Andros Adamson d497ab9751 NFSv3: match sec= flavor against server list
Older linux clients match the 'sec=' mount option flavor against the server's
flavor list (if available) and return EPERM if the specified flavor or AUTH_NULL
(which "matches" any flavor) is not found.

Recent changes skip this step and allow the vfs mount even though no operations
will succeed, creating a 'dud' mount.

This patch reverts back to the old behavior of matching specified flavors
against the server list and also returns EPERM when no sec= is specified and
none of the flavors returned by the server are supported by the client.

Example of behavior change:

the server's /etc/exports:

/export/krb5      *(sec=krb5,rw,no_root_squash)

old client behavior:

$ uname -a
Linux one.apikia.fake 3.8.8-202.fc18.x86_64  SMP Wed Apr 17 23:25:17 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
$ sudo mount -v -o sec=sys,vers=3 zero:/export/krb5 /mnt
mount.nfs: timeout set for Sun May  5 17:32:04 2013
mount.nfs: trying text-based options 'sec=sys,vers=3,addr=192.168.100.10'
mount.nfs: prog 100003, trying vers=3, prot=6
mount.nfs: trying 192.168.100.10 prog 100003 vers 3 prot TCP port 2049
mount.nfs: prog 100005, trying vers=3, prot=17
mount.nfs: trying 192.168.100.10 prog 100005 vers 3 prot UDP port 20048
mount.nfs: mount(2): Permission denied
mount.nfs: access denied by server while mounting zero:/export/krb5

recently changed behavior:

$ uname -a
Linux one.apikia.fake 3.9.0-testing+  SMP Fri May 3 20:29:32 EDT 2013 x86_64 x86_64 x86_64 GNU/Linux
$ sudo mount -v -o sec=sys,vers=3 zero:/export/krb5 /mnt
mount.nfs: timeout set for Sun May  5 17:37:17 2013
mount.nfs: trying text-based options 'sec=sys,vers=3,addr=192.168.100.10'
mount.nfs: prog 100003, trying vers=3, prot=6
mount.nfs: trying 192.168.100.10 prog 100003 vers 3 prot TCP port 2049
mount.nfs: prog 100005, trying vers=3, prot=17
mount.nfs: trying 192.168.100.10 prog 100005 vers 3 prot UDP port 20048
$ ls /mnt
ls: cannot open directory /mnt: Permission denied
$ sudo ls /mnt
ls: cannot open directory /mnt: Permission denied
$ sudo df /mnt
df: ‘/mnt’: Permission denied
df: no file systems processed
$ sudo umount /mnt
$

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-05-06 17:24:36 -04:00
Trond Myklebust c8b2d0bfd3 NFSv4.1: Ensure that we free the lock stateid on the server
This ensures that the server doesn't need to keep huge numbers of
lock stateids waiting around for the final CLOSE.
See section 8.2.4 in RFC5661.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-05-06 17:24:27 -04:00
Trond Myklebust 7c1d5fae4a NFSv4: Convert nfs41_free_stateid to use an asynchronous RPC call
The main reason for doing this is will be to allow for an asynchronous
RPC mode that we can use for freeing lock stateids as per section
8.2.4 of RFC5661.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-05-06 17:24:22 -04:00
Helge Deller f21dda025a parisc: implement atomic64_dec_if_positive()
Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-06 23:10:04 +02:00
John David Anglin bbbfde7820 parisc: use long branch in fork_like macro
The "b" branch instruction used in the fork_like macro only can handle
17-bit pc-relative offsets.
This fails with an out of range offset with some .config files.
Rewrite to use the "be" instruction which
can branch to any address in a space.

Signed-off-by: John David Anglin  <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-06 23:09:48 +02:00
Mike Frysinger 93782eba49 parisc: fix NATIVE set up in build
The ifeq operator does not accept globs, so this little bit of code will
never match (unless uname literally prints out "parsic*").  Rewrite to
use a pattern matching operator so that NATIVE is set to 1 on parisc.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-06 23:09:33 +02:00
Helge Deller dde397981c parisc: document the parisc gateway page
Include some documentation about how the parisc gateway page technically
works and how it is used from userspace.

James Bottomley is the original author of this description and it was
copied here out of an email thread from Apr 12 2013 titled:
man2 : syscall.2 : document syscall calling conventions

CC: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-06 23:09:10 +02:00
Helge Deller 6a45716abb parisc: fix partly 16/64k PAGE_SIZE boot
This patch fixes partly PAGE_SIZEs of 16K or 64K by adjusting the
assembler PTE lookup code and the assembler TEMPALIAS code.  Furthermore
some data alignments for PAGE_SIZE have been limited to 4K (or less) to
not waste too much memory with greater page sizes. As a side note, the
palo loader can (currently) only handle up to 10 ELF segments which is
fixed with tighter aligning as well.

My testings indicated that the ldci command in the sba iommu coding
needed adjustment by the PAGE_SHIFT value and that the I/O PDIR Page
size was only set to 4K for my machine (C3000).

All this fixes partly the boot, but there are still quite some caching
problems left.  Examples are e.g. the symbios logic driver which is
failing:

sym0: <896> rev 0x7 at pci 0000:00:0f.0 irq 69
sym0: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking
CACHE TEST FAILED: DMA error (dstat=0x81).sym0: CACHE INCORRECTLY CONFIGURED.

and the tulip network driver which doesn't seem to work correctly
either:

Sending BOOTP requests .net eth0: Setting full-duplex based on MII#1
link partner capability of 05e1
..... timed out!

Beside those kernel fixes glibc will need fixes too to be able to handle
>4K page sizes.

Signed-off-by: Helge Deller <deller@gmx.de>
2013-05-06 23:08:32 +02:00