pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200525071732.5887-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Updating power management register requires toggling the shutdown
bit otherwise it causes unexpected behavior of the codec.
However, toggling the shutdown bit results in loud speaker crackling.
Setup the power management register only at startup to avoid that.
Signed-off-by: Pavel Dobias <dobias@2n.cz>
Link: https://lore.kernel.org/r/20200522142957.18364-3-dobias@2n.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
MAX9867 codec has a possibility of connecting digital microphones.
Add DAPM controls to be able to enable them.
Signed-off-by: Pavel Dobias <dobias@2n.cz>
Link: https://lore.kernel.org/r/20200522142957.18364-2-dobias@2n.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Mono Playback switch to codec controls which enables codec's
capability of mixing left and right channel at the DAC output.
Signed-off-by: Pavel Dobias <dobias@2n.cz>
Link: https://lore.kernel.org/r/20200520071904.15801-5-dobias@2n.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
MAX9867 codec doesn't have reset pin, so the registers don't
have default values in the case of reboot without powering off.
Remove the reg_defaults struct and let the regmap read initial
state of the registers at startup instead of taking them from
reg_defaults struct.
Signed-off-by: Pavel Dobias <dobias@2n.cz>
Link: https://lore.kernel.org/r/20200520071904.15801-2-dobias@2n.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
We have snd_soc_dai/dai_stream/component_active() macro
This patch uses it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87wo5e58j4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move set_pll function to component level, so that it can be used at
both component and DAI level.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200511132544.82364-5-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move set_sysclk function to component level, so that it can be used at
both component and DAI level.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200511132544.82364-4-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds support for most regulators of da7212 for improved
power management. The only thing skipped was the speaker supply,
which has some undocumented dependencies. It's supposed to be
either always-enabled or always-disabled.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200511132544.82364-3-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .read_prop callback is supposed to be called by the SoundWire core
only. Calling it again from this driver results in an additional
memory allocation for no good reason.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Cc: Shuming Fan <shumingf@realtek.com>
Cc: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20200515211531.11416-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the sdw_stream is allocated in machine driver,
set_sdw_stream() is also called with a NULL argument during the
dailink shutdown.
In this case, the drivers should not allocate any memory, and just
return.
Detected with KASAN/kmemleak.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Cc: Shuming Fan <shumingf@realtek.com>
Cc: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20200515211531.11416-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SoundWire bus core already assigns the slave ops, no need to set
them a second time manually in each driver.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Cc: Shuming Fan <shumingf@realtek.com>
Cc: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20200515211531.11416-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CrOS EC codec driver uses SHA-256 explicitly, and not in a
performance critical manner, so there is really no point in using
the SHASH crypto API here. Let's switch to the library API instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200515100309.20795-1-ardb@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ALSA controls to configure the PDM clocks.
The clocks need to be configurable to accommodate various microphones
that use clocks for low power/low resolution modes to high power/high
resolution modes.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200514123338.20392-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device tree binding declares the ti,mic-bias-source and the
ti,vref-source properties as u32. The code reads them as u8 which is
incorrect. Since the device tree binding indicates them as u32 the
conde needs to be updated to read u32.
In addition the bias source needs to be shifted 4 bits to
correctly write the register.
driver family")
Fixes: 37bde5acf040 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200513142807.11802-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When CLOCKING2 is non-volatile register, we need force clear
the WM8962_SYSCLK_ENA bit after reset, for the value in cache
maybe 0 but in hardware it is 1. Otherwise there will issue
as below statement in driver.
/* SYSCLK defaults to on; make sure it is off so we can safely
* write to registers if the device is declocked.
Fixes: c38b608504 ("ASoC: wm8962: set CLOCKING2 as non-volatile register")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1589347835-20554-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The wov_hotword_model_put() function has multiple large variables on
its stack, the largest of which is the result of SHASH_DESC_ON_STACK().
In total, this exceeds the warning limit for 32-bit architectures:
sound/soc/codecs/cros_ec_codec.c:776:12: error: stack frame size of 1152 bytes in function 'wov_hotword_model_put' [-Werror,-Wframe-larger-than=]
The function already has a dynamic crypto_alloc_shash() allocation, so
using kmalloc() for the descriptor is correct as well and does not
introduce any additional failure scenarios. With this, the stack usage
of wov_hotword_model_put() gets reduced to 480 bytes in my test
configuration.
Fixes: b6bc07d436 ("ASoC: cros_ec_codec: support WoV")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200507213405.1869430-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
During S3 test, the following error was observed:
[ 726.174237] i2c_designware i2c_designware.0: platform_pm_resume+0x0/0x3d returned 0 after 0 usecs
[ 726.184187] max98373 i2c-MX98373:00: calling max98373_resume+0x0/0x30 [snd_soc_max98373] @ 12698, parent: i2c-11
[ 726.195589] max98373 i2c-MX98373:00: Reset command failed. (ret:-16)
When calling regmap_update_bits(), since map->reg_update_bits is NULL,
_regmap_read() is entered with the following logic:
if (!map->cache_bypass) {
ret = regcache_read(map, reg, val);
if (ret == 0)
return 0;
}
if (map->cache_only)
return -EBUSY;
regcache_read() hits -EINVAL because MAX98373_R2000_SW_RESET is volatile,
as map->cache_only is set by codec suspend, thus -EBUSY is returned.
Fix by moving max98373_reset() after cache_only set to false in max98373_resume().
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Link: https://lore.kernel.org/r/1588376661-29799-1-git-send-email-yong.zhi@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The following dev_err() is intended to print unexpected btn_type.
Removes the unwanted btn_type assignment.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200430082231.151127-7-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If one of the two is a loadable module, the combined driver must
not be built-in:
aarch64-linux-ld: sound/soc/codecs/rt5682.o: in function `rt5682_sdw_hw_free':
rt5682.c:(.text+0xb34): undefined reference to `sdw_stream_remove_slave'
aarch64-linux-ld: sound/soc/codecs/rt5682.o: in function `rt5682_sdw_hw_params':
rt5682.c:(.text+0xe78): undefined reference to `sdw_stream_add_slave'
In particular, the soundwire driver must not be built-in if
CONFIG_I2C=m.
Fixes: 5549ea6479 ("ASoC: rt5682: fix unmet dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200428214642.3925004-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch implements the following features:
- AUX input for recording.
- An input AUX output to SPK/MOUT.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20200429090002.28556-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the mic gain registers for channels 2-4.
The incorret register was being set as it was touching the CH1 config
registers.
Fixes: 37bde5acf040 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200427203608.7031-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously CLOCKING2 is set as a volatile register, but cause
issue at suspend & resume, that some bits of CLOCKING2 is not
restored at resume, for example SYSCLK_SRC bits, then the output
clock is wrong.
The volatile property is caused by CLASSD_CLK_DIV bits,
which are controlled by the chip itself. But the datasheet
claims these are read only and protected by the security key,
and they are not read by the driver at all.
So it should be safe to change CLOCKING2 to be non-volatile.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/6d25d5b36d4b9aeb8655b5e947dad52214e34177.1587693523.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If there is a power GPIO provided we control it from DAPM context so there
is no problem with a sleeping GPIO, use the _cansleep() version of the API
to allow this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200422083550.50711-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Mark
Current snd_soc_component_driver has compr_ops,
but it is created for ALSA, not for ALSA SoC.
This means it doesn't know the callback is for which component,
thus, each callback needs to get component via lookup function.
It is not good design, and will not work in the future,
because ASoC can have multipul same name component which
current lookup function can't handle.
This v2 patch-set adds new snd_compress_ops and call
callbacks with component.
v1 is here
Link: https://lore.kernel.org/alsa-devel/87blnqpuqp.wl-kuninori.morimoto.gx@renesas.com/
Kuninori Morimoto (8):
ASoC: soc-compress: add snd_compress_ops
ASoC: codec: wm_adsp: use snd_compress_ops
ASoC: uniphier: use snd_compress_ops
ASoC: qcom: q6sp6: use snd_compress_ops
ASoC: intel: atom: use snd_compress_ops
ASoC: sof: use snd_compress_ops
ASoC: sprd: use snd_compress_ops
ASoC: soc-compress: remove snd_compr_ops
include/sound/soc-component.h | 40 ++++++++-
sound/soc/codecs/cs47l15.c | 9 +-
sound/soc/codecs/cs47l24.c | 8 +-
sound/soc/codecs/cs47l35.c | 9 +-
sound/soc/codecs/cs47l85.c | 9 +-
sound/soc/codecs/cs47l90.c | 9 +-
sound/soc/codecs/cs47l92.c | 9 +-
sound/soc/codecs/wm5102.c | 9 +-
sound/soc/codecs/wm5110.c | 8 +-
sound/soc/codecs/wm_adsp.c | 18 ++--
sound/soc/codecs/wm_adsp.h | 18 ++--
.../intel/atom/sst-mfld-platform-compress.c | 43 +++++----
sound/soc/intel/atom/sst-mfld-platform-pcm.c | 2 +-
sound/soc/intel/atom/sst-mfld-platform.h | 2 +-
sound/soc/qcom/qdsp6/q6asm-dai.c | 51 ++++++-----
sound/soc/soc-compress.c | 89 ++++++++++---------
sound/soc/sof/compress.c | 7 +-
sound/soc/sof/compress.h | 7 +-
sound/soc/sof/pcm.c | 4 +-
sound/soc/sof/sof-priv.h | 2 +-
sound/soc/sprd/sprd-pcm-compress.c | 49 +++++-----
sound/soc/sprd/sprd-pcm-dma.c | 2 +-
sound/soc/sprd/sprd-pcm-dma.h | 2 +-
sound/soc/uniphier/aio-compress.c | 45 ++++++----
sound/soc/uniphier/aio-dma.c | 2 +-
sound/soc/uniphier/aio.h | 2 +-
26 files changed, 265 insertions(+), 190 deletions(-)
--
2.17.1
The ZL38060 is a "Connected Home Audio Processor" from Microsemi,
which consists of a Digital Signal Processor (DSP), several Digital
Audio Interfaces (DAIs), analog outputs, and a block of 14 GPIOs.
This driver supports only a tiny subset of the chip's functionality
and possible configurations:
- bypass mode (whole dsp block is bypassed)
- chip's I2S DAI routed directly to/from DACs and microphone
- chip's internal clock is driven by a 12 MHz external crystal
- chip's DAI connected to CPU is I2S, and bit + frame clock master
- chip must be strapped for "host boot": in this mode, firmware will
be provided by this driver.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Link: https://lore.kernel.org/r/20200417221341.31428-2-TheSven73@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/87tv1evdlu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dinghao Liu