Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- Zero-length DMA mapping in caam
- Invalidly mapping stack memory for DMA in talitos
- Use after free in cavium/nitrox
- Key parsing in authenc
- Undefined shift in sm3
- Bogus completion call in authencesn
- SHA support detection in caam"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sm3 - fix undefined shift by >= width of value
crypto: talitos - fix ablkcipher for CONFIG_VMAP_STACK
crypto: talitos - reorder code in talitos_edesc_alloc()
crypto: adiantum - initialize crypto_spawn::inst
crypto: cavium/nitrox - Use after free in process_response_list()
crypto: authencesn - Avoid twice completion call in decrypt path
crypto: caam - fix SHA support detection
crypto: caam - fix zero-length buffer DMA mapping
crypto: ccree - convert to use crypto_authenc_extractkeys()
crypto: bcm - convert to use crypto_authenc_extractkeys()
crypto: authenc - fix parsing key with misaligned rta_len
We free "sr" and then dereference it on the next line.
Fixes: c9613335bf ("crypto: cavium/nitrox - Added AEAD cipher support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.
This change was generated with the following Coccinelle SmPL patch:
@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@
-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Added support to offload AEAD ciphers to NITROX. Currently supported
AEAD cipher is 'gcm(aes)'.
Signed-off-by: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
Reviewed-by: Srikanth Jampala <jsrikanth@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enabled the PF->VF Mailbox support. Mailbox message are interpreted
as {type, opcode, data}. Supported message types are REQ, ACK and NACK.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable the available interrupt vectors for PF in SR-IOV Mode.
Only single vector entry 192 is valid of PF. This is used to
notify any hardware errors and mailbox messages from VF(s).
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
nitrox_skcipher_crypt() will do the necessary formatting/ordering of
input and output sglists based on the algorithm requirements.
It will also accommodate the mandatory output buffers required for
NITROX hardware like Output request headers (ORH) and Completion headers.
Signed-off-by: Nagadheeraj Rottela <rottela.nagadheeraj@cavium.com>
Reviewed-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In crypto_alloc_context(), a DMA pool is allocated through dma_pool_alloc()
to hold the crypto context. The meta data of the DMA pool, including the
pool used for the allocation 'ndev->ctx_pool' and the base address of the
DMA pool used by the device 'dma', are then stored to the beginning of the
pool. These meta data are eventually used in crypto_free_context() to free
the DMA pool through dma_pool_free(). However, given that the DMA pool can
also be accessed by the device, a malicious device can modify these meta
data, especially when the device is controlled to deploy an attack. This
can cause an unexpected DMA pool free failure.
To avoid the above issue, this patch introduces a new structure
crypto_ctx_hdr and a new field chdr in the structure nitrox_crypto_ctx hold
the meta data information of the DMA pool after the allocation. Note that
the original structure ctx_hdr is not changed to ensure the compatibility.
Cc: <stable@vger.kernel.org>
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
replace pci_enable_msix_exact() with pci_alloc_irq_vectors(). get the
required vector count from pci_msix_vec_count().
use struct nitrox_q_vector as the argument to tasklets.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Reviewed-by: Gadam Sreerama <sgadam@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use node based allocations for queues. consider the dma address
alignment changes, while calculating the queue base address.
added checks in cleanup functions. Minor changes to queue variable names
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Reviewed-by: Gadam Sreerama <sgadam@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
check the flr capability using pcie_has_flr() and do the flr.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Reviewed-by: Gadam Sreerama <sgadam@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
fix compilation warnings with nitrox_debugfs.c while printing
atomic64_t types on arm64. typecast the atomic64_read() value to u64
This issue is reported by Ard Biesheuvel
drivers/crypto/cavium/nitrox/nitrox_debugfs.c:62:30:
warning: format ‘%lld’ expects argument of type ‘long long int’,
but argument 3 has type ‘long int’ [-Wformat=]
seq_printf(s, " Posted: %lld\n", atomic64_read(&ndev->stats.posted));
^
Fixes: 2a8780be9c (crypto: cavium/nitrox - updated debugfs information)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Reviewed-by: Gadam Sreerama <sgadam@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
kfree has taken the null pointer into account. hence it is safe
to remove the redundant null pointer check before kfree.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Updated debugfs to provide device partname and frequency etc.
New file "stats" shows the number of requests posted, dropped and
completed.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add per device statistics like number of requests posted,
dropped and completed etc.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Get the device partname based on it's capabilities like,
core frequency, number of cores and revision id.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
use dma_pool_zalloc() instead of dma_pool_alloc with __GFP_ZERO flag.
crypto dma pool renamed to "nitrox-context".
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added support to configure SR-IOV using sysfs interface.
Supported VF modes are 16, 32, 64 and 128. Grouped the
hardware configuration functions to "nitrox_hal.h" file.
Changed driver version to "1.1".
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Reviewed-by: Gadam Sreerama <sgadam@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Earlier used to post the current command without checking queue full
after backlog submissions. So, post the current command only after
confirming the space in queue after backlog submissions.
Maintain host write index instead of reading device registers
to get the next free slot to post the command.
Return -ENOSPC in queue full case.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Reviewed-by: Gadam Sreerama <sgadam@cavium.com>
Tested-by: Jha, Chandan <Chandan.Jha@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_alloc_context() is only called by nitrox_skcipher_init(), which is
never called in atomic context.
crypto_alloc_context() calls dma_pool_alloc() with GFP_ATOMIC,
which is not necessary.
GFP_ATOMIC can be replaced with GFP_KERNEL.
This is found by a static analysis tool named DCNS written by myself.
I also manually check the kernel code before reporting it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The structure algs is local to the source and does not need to be in
global scope, so make it static.
Cleans up sparse warning:
drivers/crypto/cavium/cpt/cptvf_algs.c:354:19: warning: symbol 'algs'
was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Switch to raw_smp_processor_id() to prevent a number of
warnings from kernel debugging. We do not care about
preemption here, as the CPU number is only used as a
poor mans load balancing or device selection. If preemption
happens during a compress/decompress operation a small performance
hit will occur but everything will continue to work, so just
ignore it.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Reviewed-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The pending request counter was read from the wrong register. While
at it, there is no need to use an atomic for it as it is only read
localy in a loop.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Reviewed-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Avoid two potential divisions by zero when calculating average
values for the zip statistics.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Reviewed-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After issuing a request an endless loop was used to read the
completion state from memory which is asynchronously updated
by the ZIP coprocessor.
Add an upper bound to the retry attempts to prevent a CPU getting stuck
forever in case of an error. Additionally, add a read memory barrier
and a small delay between the reading attempts.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Reviewed-by: Robert Richter <rrichter@cavium.com>
Cc: stable <stable@vger.kernel.org> # 4.14
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enabling virtual mapped kernel stacks breaks the thunderx_zip
driver. On compression or decompression the executing CPU hangs
in an endless loop. The reason for this is the usage of __pa
by the driver which does no longer work for an address that is
not part of the 1:1 mapping.
The zip driver allocates a result struct on the stack and needs
to tell the hardware the physical address within this struct
that is used to signal the completion of the request.
As the hardware gets the wrong address after the broken __pa
conversion it writes to an arbitrary address. The zip driver then
waits forever for the completion byte to contain a non-zero value.
Allocating the result struct from 1:1 mapped memory resolves this
bug.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Reviewed-by: Robert Richter <rrichter@cavium.com>
Cc: stable <stable@vger.kernel.org> # 4.14
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
cpt_device_init() is never called in atomic context.
The call chain ending up at cpt_device_init() is:
[1] cpt_device_init() <- cpt_probe()
cpt_probe() is only set as ".probe" in pci_driver structure
"cpt_pci_driver".
Despite never getting called from atomic context, cpt_device_init() calls
mdelay(100), i.e. busy wait for 100ms.
That is not necessary and can be replaced with msleep to
avoid busy waiting.
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The object info is being leaked on an error return path, fix this
by setting ret to -ENOMEM and exiting via the request_cleanup path
that will free info.
Detected by CoverityScan, CID#1408439 ("Resource Leak")
Fixes: c694b23329 ("crypto: cavium - Add the Virtual Function driver for CPT")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
The variable offset is being assigned and not being used; it should
be passed as the 2nd argument to call to function nitrox_write_csr
but has been omitted. Fix this.
Cleans up clang warning: Value stored to 'offset' is never read
Fixes: 14fa93cdcd ("crypto: cavium - Add support for CNN55XX adapters.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'err' is known to be 0 at this point.
If 'kzalloc()' fails, returns -ENOMEM instead of 0 which means success.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Two return case misses to call release_firmware() and so leak some
memory.
This patch create a fw_release label (and so a common error path)
and use it on all return case.
Detected by CoverityScan, CID#1416422 ("Resource Leak")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Moved the firmware to "cavium" subdirectory as suggested by
Kyle McMartin.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
- fix new compiler warnings in cavium
- set post-op IV properly in caam (this fixes chaining)
- fix potential use-after-free in atmel in case of EBUSY
- fix sleeping in softirq path in chcr
- disable buggy sha1-avx2 driver (may overread and page fault)
- fix use-after-free on signals in caam
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: cavium - make several functions static
crypto: chcr - Avoid algo allocation in softirq.
crypto: caam - properly set IV after {en,de}crypt
crypto: atmel - only treat EBUSY as transient if backlog
crypto: af_alg - Avoid sock_graft call warning
crypto: caam - fix signals handling
crypto: sha1-ssse3 - Disable avx2
The functions cvm_encrypt, cvm_decrypt, cvm_xts_setkey and
cvm_enc_dec_init does not need to be in global scope, so make
them static.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Every developer always thinks that _their_ code is so special and
magical that it should be enabled by default.
And most of them are completely and utterly wrong. That's definitely
the case when you write a specialty driver for a very unsual "security
processor". It does *not* get to mark itself as "default m".
If you solve world hunger, and make a driver that cures people of
cancer, by all means enable it by default. But afaik, the Cavium
CNN55XX does neither.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We want to return negative error codes here, but we're accidentally
propogating the "true" return from dma_mapping_error().
Fixes: 14fa93cdcd ("crypto: cavium - Add support for CNN55XX adapters.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Trivial fix to spelling mistake in seq_printf message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add more algorithm support for the driver.
Add support for ecb(aes), cfb(aes) and ecb(des3_ede).
Signed-off-by: George Cherian <george.cherian@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the individual encrypt/decrypt function for easch algorithm.
This is in prepration of adding more crypto algorithms supported by
hardware. While at that simplify create_ctx_hdr/create_input_list
function interfaces.
Signed-off-by: George Cherian <george.cherian@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Mailbox interrupt is common and it is not an error interrupt.
So downgrade the print from dev_err to dev_dbg.
Signed-off-by: George Cherian <george.cherian@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register the Symmetric crypto algorithms supported by
CNN55XX driver with crypto subsystem.
The following Symmetric crypto algorithms are supported,
- aes with cbc, ecb, cfb, xts, ctr and cts modes
- des3_ede with cbc and ecb modes
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add debugfs support in CNN55XX Physical Function driver.
Provides hardware counters and firmware information.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add Physical Function driver support for CNN55XX crypto adapters.
CNN55XX adapters belongs to Cavium NITROX family series,
which accelerate both Symmetric and Asymmetric crypto workloads.
These adapters have crypto engines that need firmware
to become operational.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linus Torvalds