The command of install could not handle the special files in exec
testcases, change the default rule to rsync to fix this.
The installation is unchanged after this commit.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The ftrace test requires the directory test.d and all of it's contents to be
present during execution. Use TEST_DIRS to ensure this is copied to the
INSTALL_PATH.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The usleep is only provided on distros from Redhat so running ftracetest
on other distro resulted in failures due to the missing usleep.
The reason of using [u]sleep in the test was to generate (scheduler)
events. It can be done various ways like this:
yield() { ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1; }
For more information to the history of this patch, please refer to:
Link: http://lkml.kernel.org/r/1427329943-16896-1-git-send-email-namhyung@kernel.org
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Reported-by: Luis Henriques <luis.henriques@canonical.com>
Suggested-by: Pádraig Brady <P@draigBrady.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
POSIX says that exit takes an unsigned integer between 0 and 255, so
using -1 doesn't work on POSIX shells.
There is already a well-defined failure code, $FAIL (1), so use that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
If the stack tracer (CONFIG_STACK_TRACER) is disabled, the
fgraph-filter-stack test blows chunks:
[8] ftrace - function graph filters with stack tracer [FAIL]
+ reset_tracer
+ echo nop
./ftracetest: 19: /home/michael/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc:
cannot create /proc/sys/kernel/stack_tracer_enabled: Directory nonexistent
Fix it by checking if the proc file exists before echoing to it. With
the patch applied it fails correctly with:
[8] ftrace - function graph filters with stack tracer [UNSUPPORTED]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds a Make include file which most selftests can then include to
get the run_tests logic.
On its own this has the advantage of some reduction in repetition, and
also means the pass/fail message is defined in fewer places.
However the key advantage is it will allow us to implement install very
simply in a subsequent patch.
The default implementation just executes each program in $(TEST_PROGS).
We use a variable to hold the default implementation of $(RUN_TESTS)
because that gives us a clean way to override it if necessary, ie. using
override. The mount, memory-hotplug and mqueue tests use that to provide
a different implementation.
Tests are not run via /bin/bash, so if they are scripts they must be
executable, we add a+x to several.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add --verbose/-v option for showing echo output in testcases.
This is good for checking the progress of testcases which
take a longer time to run.
To implement this feature, all the testcase failures are
captured in ftracetest and send signal to set SIG_RESULT=FAIL.
Link: http://lkml.kernel.org/r/20141204194123.7376.22964.stgit@localhost.localdomain
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftracetest doesn't show testcase's descriptions when
it is executed on dash. This fixes that to show the
descriptions on dash correctly by passing it via a variable
instead of directly passing the grep command output.
Link: http://lkml.kernel.org/r/20141204194116.7376.78940.stgit@localhost.localdomain
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When I run the ftracetest in a busybox docker container, I saw
following error. Make the logfile template to comply with busybox's
mktemp. It also keep the logfiles under the logs directory.
# /linux/tools/testing/selftests/ftrace/ftracetest
=== Ftrace unit tests ===
mktemp: unrecognized option `--tmpdir=/linux/tools/testing/selftests/ftrace/logs/20141106-003624/'
BusyBox v1.22.1 (2014-05-22 23:22:11 UTC) multi-call binary.
Usage: mktemp [-dt] [-p DIR] [TEMPLATE]
Create a temporary file with name based on TEMPLATE and print its name.
TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).
Without TEMPLATE, -t tmp.XXXXXX is assumed.
-d Make directory, not file
-q Fail silently on errors
-t Prepend base directory name to TEMPLATE
-p DIR Use DIR as a base directory (implies -t)
-u Do not create anything; print a name
Base directory is: -p DIR, else $TMPDIR, else /tmp
[1] Basic trace file check/linux/tools/testing/selftests/ftrace/ftracetest: line 244: can't create : nonexistent directory
/linux/tools/testing/selftests/ftrace/ftracetest: line 244: can't create : nonexistent directory
[FAIL]
Link: http://lkml.kernel.org/r/1415239470-28705-1-git-send-email-namhyung@kernel.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Added three test cases to get the feel of adding tests to ftracetest.
The three cases are:
function profiling test, to make sure function profiling still works
with function tracing (was a regression)
function graph filter test to make sure that function graph filtering works.
function graph filter with stack tracing test to make sure that the function
graph filter does filter and also continues to filter when another function tracer
is running (like the stack tracer)
Link: http://lkml.kernel.org/r/20141103212737.696365174@goodmis.org
Link: http://lkml.kernel.org/r/20141104153028.602754370@goodmis.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Created the file tools/testing/ftrace/test.d/functions that will
hold helper functions.
Current helper functions include:
Add clear_trace() helper to reset the trace file
Used as a descriptive name to show that "echo > trace" is clearing
the trace file.
Add disable/enable_tracing() helper calls
Add calls that disable and enable tracing respectively by echoing
0 or 1 into tracing_on.
Add helper reset_tracer() function
Add a helper function reset_tracer() that will clear the current_tracer
(echo nop > current_tracer).
Link: http://lkml.kernel.org/r/20141103212737.696365174@goodmis.org
Link: http://lkml.kernel.org/r/20141104153028.465517119@goodmis.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a kprobes on ftrace testcase. The testcase verifies that
- enabling and disabling function tracing works on a function which
already contains a dynamic kprobe
- adding and removing a dynamic kprobe works on a function which is
already enabled for function tracing
Link: http://lkml.kernel.org/p/1413802323-5297-2-git-send-email-heiko.carstens@de.ibm.com
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Running ftracetests on a box that mounted debugfs in two locations
made the ftracetests fail. This is because the tests uses a grep
of debugfs from the /proc/mounts file to find the debugfs mount
point, and then appends "/tracing" to that string to get the tracing
directory.
If the debugfs directory is mounted twice, then that grep will return
two answers and appending "/tracing" to a string with two lines will
not work.
Use "head -1" to only take the first mount point found.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add two selftest scripts which tests kprobe-tracer as the startup
selftest does.
These test cases are testing that the kprobe_event can accept a
kprobe event with $stack related arguments and a kretprobe event
with $retval argument.
Link: http://lkml.kernel.org/p/20141008040307.13415.45145.stgit@kbuild-f20.novalocal
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add XFAIL and POSIX 1003.3 standard codes (UNRESOLVED/
UNTESTED/UNSUPPORTED) as result codes. These are used for the
results that test case is expected to fail or unsupported
feature (by config).
To return these result code, this introduces exit_unresolved,
exit_untested, exit_unsupported and exit_xfail functions,
which use real-time signals to notify the result code to
ftracetest.
This also set "errexit" option for the testcases, so that
the tests don't need to exit explicitly.
Note that if the test returns UNRESOLVED/UNSUPPORTED/FAIL,
its test log including executed commands is shown on console
and main logfile as below.
------
# ./ftracetest samples/
=== Ftrace unit tests ===
[1] failure-case example [FAIL]
execute: /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/fail.tc
+ . /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/fail.tc
++ cat non-exist-file
cat: non-exist-file: No such file or directory
[2] pass-case example [PASS]
[3] unresolved-case example [UNRESOLVED]
execute: /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unresolved.tc
+ . /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unresolved.tc
++ trap exit_unresolved INT
++ kill -INT 29324
+++ exit_unresolved
+++ kill -s 38 29265
+++ exit 0
[4] unsupported-case example [UNSUPPORTED]
execute: /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unsupported.tc
+ . /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unsupported.tc
++ exit_unsupported
++ kill -s 40 29265
++ exit 0
[5] untested-case example [UNTESTED]
[6] xfail-case example [XFAIL]
# of passed: 1
# of failed: 1
# of unresolved: 1
# of untested: 1
# of unsupported: 1
# of xfailed: 1
# of undefined(test bug): 0
------
Link: http://lkml.kernel.org/p/20140929120211.30203.99510.stgit@kbuild-f20.novalocal
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add basic testcases for kprobe dynamic events.
This also shows that the ftracetest accepts sub-directory
for new testcases.
Link: http://lkml.kernel.org/p/20140922234254.23415.46964.stgit@kbuild-f20.novalocal
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add ftrace basic testcases. This just checks ftrace debugfs
interface works as it is designed.
Link: http://lkml.kernel.org/p/20140922234252.23415.62897.stgit@kbuild-f20.novalocal
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftracetest is a collection of testcase shell-scripts for ftrace.
To avoid regressions of ftrace, these testcases check correct
ftrace behaviors. If someone would like to add any features on
ftrace, the patch series should have at least one testcase for
checking the new behavior.
Link: http://lkml.kernel.org/p/20140922234250.23415.68758.stgit@kbuild-f20.novalocal
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Bamvor Jian Zhang