Commit Graph

872427 Commits

Author SHA1 Message Date
Fabrice Gasnier 02e64276c6 i2c: stm32f7: fix first byte to send in slave mode
The slave-interface documentation [1] states "the bus driver should
transmit the first byte" upon I2C_SLAVE_READ_REQUESTED slave event:
- 'val': backend returns first byte to be sent
The driver currently ignores the 1st byte to send on this event.

[1] https://www.kernel.org/doc/Documentation/i2c/slave-interface

Fixes: 60d609f30d ("i2c: i2c-stm32f7: Add slave support")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24 20:52:17 +02:00
Fabien Parent 62931ac2f9 i2c: mt65xx: fix NULL ptr dereference
Since commit abf4923e97 ("i2c: mediatek: disable zero-length transfers
for mt8183"), there is a NULL pointer dereference for all the SoCs
that don't have any quirk. mtk_i2c_functionality is not checking that
the quirks pointer is not NULL before starting to use it.

This commit add a call to i2c_check_quirks which will check whether
the quirks pointer is set, and if so will check if the IP has the
NO_ZERO_LEN quirk.

Fixes: abf4923e97 ("i2c: mediatek: disable zero-length transfers for mt8183")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Cengiz Can <cengiz@kernel.wtf>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Ulrich Hecht <uli@fpond.eu>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24 20:52:11 +02:00
Zenghui Yu 8424312516 irqchip/gic-v3-its: Use the exact ITSList for VMOVP
On a system without Single VMOVP support (say GITS_TYPER.VMOVP == 0),
we will map vPEs only on ITSs that will actually control interrupts
for the given VM.  And when moving a vPE, the VMOVP command will be
issued only for those ITSs.

But when issuing VMOVPs we seemed fail to present the exact ITSList
to ITSs who are actually included in the synchronization operation.
The its_list_map we're currently using includes all ITSs in the system,
even though some of them don't have the corresponding vPE mapping at all.

Introduce get_its_list() to get the per-VM its_list_map, to indicate
which ITSs have vPE mappings for the given VM, and use this map as
the expected ITSList when building VMOVP. This is hopefully a performance
gain not to do some synchronization with those unsuspecting ITSs.
And initialize the whole command descriptor to zero at beginning, since
the seq_num and its_list should be RES0 when GITS_TYPER.VMOVP == 1.

Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1571802386-2680-1-git-send-email-yuzenghui@huawei.com
2019-10-24 18:02:53 +01:00
Andrew Price 30aecae86e gfs2: Fix memory leak when gfs2meta's fs_context is freed
gfs2 and gfs2meta share an ->init_fs_context function which allocates an
args structure stored in fc->fs_private. gfs2 registers a ->free
function to free this memory when the fs_context is cleaned up, but
there was not one registered for gfs2meta, causing a leak.

Register a ->free function for gfs2meta. The existing gfs2_fc_free
function does what we need.

Reported-by: syzbot+c2fdfd2b783754878fb6@syzkaller.appspotmail.com
Fixes: 1f52aa08d1 ("gfs2: Convert gfs2 to fs_context")
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-10-24 16:20:43 +02:00
Rafael J. Wysocki 767d2d710e Merge branches 'pm-cpuidle' and 'pm-opp'
* pm-cpuidle:
  cpuidle: haltpoll: Take 'idle=' override into account

* pm-opp:
  opp: Reinitialize the list_kref before adding the static OPPs again
  opp: core: Revert "add regulators enable and disable"
  opp: of: drop incorrect lockdep_assert_held()
2019-10-24 16:00:43 +02:00
Linus Torvalds f116b96685 - Bug Fixes
- Fix broken support for BananaPi-r2
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl2xWJYACgkQUa+KL4f8
 d2GakA//WJmARBjABDoeLTso4pc57eny7PyzjNGxg2Y1lqPJr3unMjt2f8TC1A/Y
 N+KedwtB2dnW64uQDNEIx5F5HYwDN5R3Lh73naCOdNwkh53hxDMx1/aFvRSeW4eQ
 SMwEPA6dphxB3x09um8Vharo30ZJPLmfzJwqIktlaThRqCRlzURlsB3LqcU8oVrv
 fhC0zFuhRyySDfSfUacL305usQymuhd+ubAR2gbk0tgWzHXeVV7ptnDpun5HUUCV
 ZjNNoVv+bk8XK63rqOtpGar14rih65L4gWeLZR2QtA8SUPNcAddz5IKGzjc/cf1m
 hPnYl3XJ+o3SIxh9/kOuxHQo83QmKkLTEndu7SS40STgJNTaXUosGtCxQ3b7I/R7
 a155YZRewp3+OXlh2k01Fb3I7wSBcH0Oh+wcvk4Bk9zqtDNCPvZyQ/K1R7RICtgu
 B72D0bwTrtq3v2lf9hAQrfCqx8hUWfUZO9aV7SeQ0/EHUQnU6ZUmWmqE8t6GHLAl
 EUinT6FA2Qg488bXKrkf6TbvK+bMGMRvW+i53FJS+Ukox0/fGpQnS9RzAC9uAMHi
 QtFdZTlU55L4JvjqKr5XsFkgO0A7EunYmVHdmJ3F59vJnWvKuhgymm7VsNdqrFwA
 GLQ7rlZ9TUQGi2zt+Iy1yF4gvatp/Bgho4CDaVfghwuIdW9KH4M=
 =Asi8
 -----END PGP SIGNATURE-----

Merge tag 'mfd-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD fix from Lee Jones:
 "Fix broken support for BananaPi-r2"

* tag 'mfd-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: mt6397: Fix probe after changing mt6397-core
2019-10-24 06:13:45 -04:00
Linus Torvalds f632bfaa33 sound fixes for 5.4-rc5
This is a usual small bump in the middle, we've got a set of ASoC
 fixes in this week as shown in diffstat.
 
 The only change in the core stuff is about (somewhat minor) PCM
 debugfs error handling.  The major changes are rather for Intel
 SOF and topology coverage, as well as other platform (rockchip,
 samsung, stm) and codec fixes.
 
 As non-ASoC changes, a couple of new HD-audio chip fixes and a
 typo correction of USB-audio driver validation code are found.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl2xNWwOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE/Rjg/9GWIetA2nCM121bS1yCYAx81K+EkEGPZmLxi3
 EquGO47IYMPZ8tBzvE4E20AKjicsWV3/5tDVGh0pYBr+6LbWOY1+5WUHXS2ysvF6
 PXt//ZPmsEQWv5awKnASW1I22Kgw9o9BjG+6Y6RuiGkWSjDrtdNyZMxlGs5/aYCi
 D7AG7znKsJOH7r3Q/g0Urou6cTUlj4ni9WWIzKtO3yyXvbu8aa1bbUIhKi3U3/xn
 EckXmRI5lU8Ov4AqKoXrtUfC+eBK7sfH5wDXYkyBby7wpZzehFbgzw4dg2LDBf7k
 dQ9ID91R715wpKn15+9r5y9qycSNgZAqqaOSln6i5xPAwzaWbiDj2P8avq4Vemy/
 Kd/slBNdr3PR7PloXWpsB2ia9bnEi4F9kyNpOoU1gXghWvzxZv/b09cj+XQ0Rip3
 +Y4fwyF8HBRykUEOVey2+IxpzYqYZ2eYMThwBF9EfVnTUTo53lx1uxmcCCAhPnQN
 nHQd1/1AzSdpKLoRyhE9QyI3c4VDnQL3NoOk9vVei4TOLl8ONDnX7Era9W8rafix
 hLgkh5agGIqVaU4v/7joDR1BUFUILar5kgOGZMH4N8O0uAOByNMjge17ENjXTkiE
 XWUVaoBMDCqs6KRGV63hkvTTlmT8AGhZBoxsZpavOvBA3uHhthPaaqcr/+ENgxsl
 MnajcUY=
 =jDN8
 -----END PGP SIGNATURE-----

Merge tag 'sound-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "This is a usual small bump in the middle, we've got a set of ASoC
  fixes in this week as shown in diffstat.

  The only change in the core stuff is about (somewhat minor) PCM
  debugfs error handling. The major changes are rather for Intel SOF and
  topology coverage, as well as other platform (rockchip, samsung, stm)
  and codec fixes.

  As non-ASoC changes, a couple of new HD-audio chip fixes and a typo
  correction of USB-audio driver validation code are found"

* tag 'sound-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
  ALSA: hda: Add Tigerlake/Jasperlake PCI ID
  ALSA: usb-audio: Fix copy&paste error in the validator
  ALSA: hda/realtek - Add support for ALC711
  ASoC: SOF: control: return true when kcontrol values change
  ASoC: stm32: sai: fix sysclk management on shutdown
  ASoC: Intel: sof-rt5682: add a check for devm_clk_get
  ASoC: rsnd: Reinitialize bit clock inversion flag for every format setting
  ASoC: simple_card_utils.h: Fix potential multiple redefinition error
  ASoC: msm8916-wcd-digital: add missing MIX2 path for RX1/2
  ASoC: core: Fix pcm code debugfs error
  ASoc: rockchip: i2s: Fix RPM imbalance
  ASoC: wm_adsp: Don't generate kcontrols without READ flags
  ASoC: intel: bytcr_rt5651: add null check to support_button_press
  ASoC: intel: sof_rt5682: add remove function to disable jack
  ASoC: rt5682: add NULL handler to set_jack function
  ASoC: intel: sof_rt5682: use separate route map for dmic
  ASoC: SOF: Intel: hda: Disable DMI L1 entry during capture
  ASoC: SOF: Intel: initialise and verify FW crash dump data.
  ASoC: SOF: Intel: hda: fix warnings during FW load
  ASoC: SOF: pcm: harden PCM STOP sequence
  ...
2019-10-24 06:09:42 -04:00
Frank Wunderlich 603d9299da mfd: mt6397: Fix probe after changing mt6397-core
Part 3 from this series [1] was not merged due to wrong splitting
and breaks mt6323 pmic on bananapi-r2

dmesg prints this line and at least switch is not initialized on bananapi-r2

mt6397 1000d000.pwrap:mt6323: unsupported chip: 0x0

this patch contains only the probe-changes and chip_data structs
from original part 3 by Hsin-Hsiung Wang

[1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=164155

Fixes: a4872e80ce ("mfd: mt6397: Extract IRQ related code from core driver")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-24 08:49:25 +01:00
Paul Burton b42aa3fd59
MIPS: tlbex: Fix build_restore_pagemask KScratch restore
build_restore_pagemask() will restore the value of register $1/$at when
its restore_scratch argument is non-zero, and aims to do so by filling a
branch delay slot. Commit 0b24cae4d5 ("MIPS: Add missing EHB in mtc0
-> mfc0 sequence.") added an EHB instruction (Execution Hazard Barrier)
prior to restoring $1 from a KScratch register, in order to resolve a
hazard that can result in stale values of the KScratch register being
observed. In particular, P-class CPUs from MIPS with out of order
execution pipelines such as the P5600 & P6600 are affected.

Unfortunately this EHB instruction was inserted in the branch delay slot
causing the MFC0 instruction which performs the restoration to no longer
execute along with the branch. The result is that the $1 register isn't
actually restored, ie. the TLB refill exception handler clobbers it -
which is exactly the problem the EHB is meant to avoid for the P-class
CPUs.

Similarly build_get_pgd_vmalloc() will restore the value of $1/$at when
its mode argument equals refill_scratch, and suffers from the same
problem.

Fix this by in both cases moving the EHB earlier in the emitted code.
There's no reason it needs to immediately precede the MFC0 - it simply
needs to be between the MTC0 & MFC0.

This bug only affects Cavium Octeon systems which use
build_fast_tlb_refill_handler().

Signed-off-by: Paul Burton <paulburton@kernel.org>
Fixes: 0b24cae4d5 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.")
Cc: Dmitry Korotin <dkorotin@wavecomp.com>
Cc: stable@vger.kernel.org # v3.15+
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
2019-10-23 21:12:49 -07:00
zhangyi (F) a1f58ba46f io_uring: correct timeout req sequence when inserting a new entry
The sequence number of the timeout req (req->sequence) indicate the
expected completion request. Because of each timeout req consume a
sequence number, so the sequence of each timeout req on the timeout
list shouldn't be the same. But now, we may get the same number (also
incorrect) if we insert a new entry before the last one, such as submit
such two timeout reqs on a new ring instance below.

                    req->sequence
 req_1 (count = 2):       2
 req_2 (count = 1):       2

Then, if we submit a nop req, req_2 will still timeout even the nop req
finished. This patch fix this problem by adjust the sequence number of
each reordered reqs when inserting a new entry.

Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-23 22:09:56 -06:00
zhangyi (F) ef03681ae8 io_uring : correct timeout req sequence when waiting timeout
The sequence number of reqs on the timeout_list before the timeout req
should be adjusted in io_timeout_fn(), because the current timeout req
will consumes a slot in the cq_ring and cq_tail pointer will be
increased, otherwise other timeout reqs may return in advance without
waiting for enough wait_nr.

Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-23 22:09:56 -06:00
Jens Axboe bc808bced3 io_uring: revert "io_uring: optimize submit_and_wait API"
There are cases where it isn't always safe to block for submission,
even if the caller asked to wait for events as well. Revert the
previous optimization of doing that.

This reverts two commits:

bf7ec93c64
c576666863

Fixes: c576666863 ("io_uring: optimize submit_and_wait API")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-23 22:09:56 -06:00
Jonas Gorski e4f5cb1a9b
MIPS: bmips: mark exception vectors as char arrays
The vectors span more than one byte, so mark them as arrays.

Fixes the following build error when building when using GCC 8.3:

In file included from ./include/linux/string.h:19,
                 from ./include/linux/bitmap.h:9,
                 from ./include/linux/cpumask.h:12,
                 from ./arch/mips/include/asm/processor.h:15,
                 from ./arch/mips/include/asm/thread_info.h:16,
                 from ./include/linux/thread_info.h:38,
                 from ./include/asm-generic/preempt.h:5,
                 from ./arch/mips/include/generated/asm/preempt.h:1,
                 from ./include/linux/preempt.h:81,
                 from ./include/linux/spinlock.h:51,
                 from ./include/linux/mmzone.h:8,
                 from ./include/linux/bootmem.h:8,
                 from arch/mips/bcm63xx/prom.c:10:
arch/mips/bcm63xx/prom.c: In function 'prom_init':
./arch/mips/include/asm/string.h:162:11: error: '__builtin_memcpy' forming offset [2, 32] is out of the bounds [0, 1] of object 'bmips_smp_movevec' with type 'char' [-Werror=array-bounds]
   __ret = __builtin_memcpy((dst), (src), __len); \
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/bcm63xx/prom.c:97:3: note: in expansion of macro 'memcpy'
   memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20);
   ^~~~~~
In file included from arch/mips/bcm63xx/prom.c:14:
./arch/mips/include/asm/bmips.h:80:13: note: 'bmips_smp_movevec' declared here
 extern char bmips_smp_movevec;

Fixes: 18a1eef92d ("MIPS: BMIPS: Introduce bmips.h")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
2019-10-23 21:07:28 -07:00
Olof Johansson 116c05bfa1 This pull request contains MAINTAINERS file updates for Broadcom SoCs
for the 5.5 kernel, please pull the following:
 
 - Simon adds a .mailmap alias for his old email
 
 - Stefan updates the existing BCM2835 with BCM2711 which is the chip
   name for the Raspberry Pi 4
 
 - Florian removes Gregory and Brian from the MAINTAINERS file for
   BRCMSTB SoCs
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAl2wpgAACgkQh9CWnEQH
 BwRl1xAAjMyQL8gKTBDuGyfznSMlMUn1gwR6BlgLg1SE/0iotCgDHRGwI1ej/0ER
 q4cCtYgslNb1y2tiENpLvJ8jZZzyWQlG6VvvIjD3qIFHrijVUnwBZZLhsP6nkWX3
 +NN/nWfUggNCYDldiNX+uu6J22PlYZ0gTs7bJMW+z7w6nhenCkJvmTeTEuQTSpx3
 6xVuOpNulQlQUJfctk/Bg5RG76SpoFrhwbeY6YyQyJ9rs9kivn1LIx6VSo26w12h
 Qxyf9gRfeACrGrSqfb2h6L2cODAgW/pyO7WLs3tkoKTebCZc65PptvNIxNaKbfgA
 86VT1YC8/tU1Qg6QgxE1TRw24fyy8xV8zpKxP3fK687XI2ZjsndDNPKnIcXBa8jB
 zKCDFGAyhA3EFnb6uU4pgPyZbzQaB2jdfhGFYV0EWc+1DtRGbP2njZnJko4MDpQK
 ggmHQjgslRKzd1PLvXJkCTjw2jHNfA6VhORS0WDom2LdVeqwnmpubvmzwEf+I/Gc
 XrIVDk1/Hhsa/+R58nO4HlK1fiL6xkZFa3PLkXXrNAIXCxb/vXUDQcgOeD961cDl
 vxloCzA5SQ1SzU7+qXUQBnPVHXrvNKJ9W9g4Sjnl5SEjZepNT/HINjz1QERIYAgy
 j9aQOojX9sjmSKHBio/g+1r87tfs3iQUD0xq+bkgYM2OWpS+nBU=
 =fGuD
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.5/maintainers' of https://github.com/Broadcom/stblinux into arm/fixes

This pull request contains MAINTAINERS file updates for Broadcom SoCs
for the 5.5 kernel, please pull the following:

- Simon adds a .mailmap alias for his old email

- Stefan updates the existing BCM2835 with BCM2711 which is the chip
  name for the Raspberry Pi 4

- Florian removes Gregory and Brian from the MAINTAINERS file for
  BRCMSTB SoCs

* tag 'arm-soc/for-5.5/maintainers' of https://github.com/Broadcom/stblinux:
  MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB
  mailmap: Add Simon Arlott (replacement for expired email address)
  MAINTAINERS: Add BCM2711 to BCM2835 ARCH

Link: https://lore.kernel.org/r/20191023212814.30622-3-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-23 20:01:25 -07:00
Baolin Wang d4267a57d3 MAINTAINERS: Update the Spreadtrum SoC maintainer
Change my email address, and add more Spreadtrum SC27xx series PMIC
drivers to maintain.

Link: https://lore.kernel.org/r/a48483d13243450ecf3b777d49e741b6367f2c6b.1571881956.git.baolin.wang@linaro.org
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-23 19:59:20 -07:00
Christoph Hellwig a6d9e26726 riscv: cleanup <asm/bug.h>
Remove various not required ifdefs and externs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-23 14:53:46 -07:00
Kefeng Wang 9fe57d8c57 riscv: Fix undefined reference to vmemmap_populate_basepages
Using CONFIG_SPARSEMEM_VMEMMAP instead of CONFIG_SPARSEMEM to fix
following build issue.

  riscv64-linux-ld: arch/riscv/mm/init.o: in function 'vmemmap_populate':
  init.c:(.meminit.text+0x8): undefined reference to 'vmemmap_populate_basepages'

Cc: Logan Gunthorpe <logang@deltatee.com>
Fixes: d95f1a542c ("RISC-V: Implement sparsemem")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-23 14:53:46 -07:00
Kefeng Wang 62103ece52 riscv: Fix implicit declaration of 'page_to_section'
With CONFIG_SPARSEMEM and !CONFIG_SPARSEMEM_VMEMMAP,

arch/riscv/include/asm/pgtable.h: In function ‘mk_pte’:
include/asm-generic/memory_model.h:64:14: error: implicit declaration of function ‘page_to_section’; did you mean ‘present_section’? [-Werror=implicit-function-declaration]
  int __sec = page_to_section(__pg);   \
              ^~~~~~~~~~~~~~~

Fixed by changing mk_pte() from inline function to macro.

Cc: Logan Gunthorpe <logang@deltatee.com>
Fixes: d95f1a542c ("RISC-V: Implement sparsemem")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[paul.walmsley@sifive.com: fixed checkpatch errors]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-23 14:53:46 -07:00
David Abdurachmanov 90db7b220c riscv: fix fs/proc/kcore.c compilation with sparsemem enabled
Failed to compile Fedora/RISCV kernel (5.4-rc3+) with sparsemem enabled:

fs/proc/kcore.c: In function 'read_kcore':
fs/proc/kcore.c:510:8: error: implicit declaration of function 'kern_addr_valid'; did you mean 'virt_addr_valid'? [-Werror=implicit-function-declaration]
  510 |    if (kern_addr_valid(start)) {
      |        ^~~~~~~~~~~~~~~
      |        virt_addr_valid

Looking at other architectures I don't see kern_addr_valid being guarded by
CONFIG_FLATMEM.

Fixes: d95f1a542c ("RISC-V: Implement sparsemem")
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Tested-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-23 14:53:46 -07:00
Chris Goldsworthy 5dba51754b of: reserved_mem: add missing of_node_put() for proper ref-counting
Commit d698a38814 ("of: reserved-memory: ignore disabled memory-region
nodes") added an early return in of_reserved_mem_device_init_by_idx(), but
didn't call of_node_put() on a device_node whose ref-count was incremented
in the call to of_parse_phandle() preceding the early exit.

Fixes: d698a38814 ("of: reserved-memory: ignore disabled memory-region nodes")
Signed-off-by: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2019-10-23 15:15:05 -05:00
Linus Torvalds fa8a74de06 Two minor fixes:
- A race in perf trace initialization (missing mutexes)
 
  - Minor fix to represent gfp_t in synthetic events as properly signed
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXa5C9hQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qrFqAP9FskyS8xr1iqquWGarC38jYaLg8C2c
 7ou+tdIm+Rez5QEA+3E456Esusmx3dACk2QLeb788Pf1wQOjKXyZ9H+2eAE=
 =ys+Y
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.4-rc3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Two minor fixes:

   - A race in perf trace initialization (missing mutexes)

   - Minor fix to represent gfp_t in synthetic events as properly
     signed"

* tag 'trace-v5.4-rc3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix race in perf_trace_buf initialization
  tracing: Fix "gfp_t" format for synthetic events
2019-10-23 15:43:51 -04:00
Navid Emamdoost e13de8fe0d of: unittest: fix memory leak in unittest_data_add
In unittest_data_add, a copy buffer is created via kmemdup. This buffer
is leaked if of_fdt_unflatten_tree fails. The release for the
unittest_data buffer is added.

Fixes: b951f9dc7f ("Enabling OF selftest to run without machine's devicetree")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2019-10-23 14:42:44 -05:00
Rob Herring 9af865d95b dt-bindings: riscv: Fix CPU schema errors
Fix the errors in the RiscV CPU DT schema:

Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: 'timebase-frequency' is a required property
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@1: 'timebase-frequency' is a required property
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: compatible:0: 'riscv' is not one of ['sifive,rocket0', 'sifive,e5', 'sifive,e51', 'sifive,u54-mc', 'sifive,u54', 'sifive,u5']
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: compatible: ['riscv'] is too short
Documentation/devicetree/bindings/riscv/cpus.example.dt.yaml: cpu@0: 'timebase-frequency' is a required property

The DT spec allows for 'timebase-frequency' to be in 'cpu' or 'cpus' node
and RiscV requires it in /cpus node, so make it disallowed in cpu
nodes.

Fixes: 4fd669a8c4 ("dt-bindings: riscv: convert cpu binding to json-schema")
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Acked-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2019-10-23 14:42:44 -05:00
Linus Torvalds 64131618e8 VFIO fixes for v5.4-rc5
- Fix (false) uninitialized variable warning (Joerg Roedel)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJdsIdOAAoJECObm247sIsiB8IP/1cLd49KxA2PGUybhEvOt7rM
 9qFDMevTWbNPcmiqrYgBbLcnjAhagDAjXlIim3oJU7N+Oyn9y70ZIeObfp2ys2W+
 +oP7GZq/fYiUzl06+Cybhcx2yjZXgRDdZrXw307SFew31sZyVDGWTU1aOpMmVH3e
 YgxGRRhw6VNm0P/X6Vxx+QhmHcBuaPKaeweEo3qpbhQZSs4qizq2G3As4c4NK7K2
 sObLBP75q5b8Zv7lHjifzz1naq15yJ1R8Ql+eyI9OtGp4AFCn+z7lF+gsMg1gF5S
 GHSTXaotOxepeivp79MoV8fA8nEd/PFvbUSq5JhpbaViYubPw80XzsAZNjx3zF8S
 ZfI75kyRkcwtDIcUYlM02p+g+ifkrDI1CVtv+VdW2ZTDkVPIVrdVnAchrbqUEj/U
 7fymJOfuAy27lbx98/uraO/oZp76dgNBPCO/oLCYweGsQKKBJLdV/H35lfUwG37l
 HDYw7Ex8m23zCOv7YBHIYYwpCSOwp2GlS+qThUcJieCnp3Cz7dkqu7USUHKLm5y3
 O9UmvxnmuakMshgIV6KR5lQjVxjtggW2pNd364DhRl211QJE+/EIcfx6iBkAEXNk
 JYe2P3+dGfjY2RxixVM0yMGyJQLst1F/8KsVQKz1kyC3S36woa+5JOsKOygBocVu
 tpfoqSBEMQZiheDy9cwS
 =2YtI
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v5.4-rc5' of git://github.com/awilliam/linux-vfio

Pull VFIO fixlet from Alex Williamson:
 "Fix (false) uninitialized variable warning (Joerg Roedel)"

* tag 'vfio-v5.4-rc5' of git://github.com/awilliam/linux-vfio:
  vfio/type1: Initialize resv_msi_base
2019-10-23 15:39:02 -04:00
Linus Torvalds deed1d4469 regulator: Fixes for v5.4
There are a few core fixes here around error handling and handling if
 suspend mode configuration and some driver specific fixes here but the
 most important change is the fix to the fixed-regulator DT schema
 conversion introduced during the last merge window. That fixes one of
 the last two errors preventing successful execution of "make dt_binding_check"
 which will be enourmously helpful for DT schema development.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl2wgdsTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0PxRB/4uqIJR3n3mIdrHtB0DVaZEWm7jsC6L
 PUYZZH//EkLe6d5hgb2qKYrpIJIlKdrVukySl/uyE//gxNH6BUOgggfAGx5qIAjN
 qGB6dv+M+AWiDW3hRkMPQ/RnnNgm/llM5cOIHjFqHvYiVbfppIYkKFoCMS8BPWDT
 8DUlSwRTGHDKlR1Zn7+HJqvE+eoDAgTVnwoDKaZUh6sL2UrNA8nf0irsB6yq1n+u
 1O9D02oTd01tw8Qy3/zAdL+E1RfHbYAuobz367mRUaEzZg6AFG3eWkuJdGIYR+14
 C5ypBi/e0zXOyWHEjA5qfxXNbw0U+j4R37iPdgvQvhVQp7D8gIPqXIxX
 =r41P
 -----END PGP SIGNATURE-----

Merge tag 'regulator-fix-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "There are a few core fixes here around error handling and handling if
  suspend mode configuration and some driver specific fixes here but the
  most important change is the fix to the fixed-regulator DT schema
  conversion introduced during the last merge window.

  That fixes one of the last two errors preventing successful execution
  of "make dt_binding_check" which will be enormously helpful for DT
  schema development"

* tag 'regulator-fix-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom-rpmh: Fix PMIC5 BoB min voltage
  regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized
  regulator: lochnagar: Add on_off_delay for VDDCORE
  regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone
  regulator: da9062: fix suspend_enable/disable preparation
  dt-bindings: fixed-regulator: fix compatible enum
  regulator: fixed: Prevent NULL pointer dereference when !CONFIG_OF
  regulator: core: make regulator_register() EPROBE_DEFER aware
  regulator: of: fix suspend-min/max-voltage parsing
2019-10-23 15:31:17 -04:00
Florian Fainelli 0d660ffbca MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB
The last time Gregory and Brian did a review was sometime around 2015,
since then, they have not been active for ARCH_BRCMSTB changes.
Following the position of other maintainers and Harald Welte's position
here:

[1] http://laforge.gnumonks.org/blog/20180307-mchardy-gpl/

remove both of them.

Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-10-23 12:02:05 -07:00
Olof Johansson f82bc13540 Three fixes for omaps for v5.4-rc cycle
Two regression fixes for omap3 iommu. I missed applying two omap3
 related iommu pdata quirks patches earlier because the kbuild test
 robot produced errors on them for missing dependencies.
 
 Fix ti-sysc interconnect target module driver handling for watchdog
 quirk. I must have tested this earlier only with watchdog service
 running, but clearly it does not do what it needs to do.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl2wgcERHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXN1Vw/+JqxMt2izYIZiVln4uWia37Zypl7yjwFH
 6HXgmVPOY0NT17gOYwjX4Fnmvrwe5SsT7obvjPSMCQTNUykffoB2CxiYBMTJ6XPx
 5KQMzPT8JCXWBxNNkU+ksHxNjFYhF3s0VIUJX3NGCsCv0YXdjPjWmmZ1udvDvEX1
 WDN+YfYrCGWd8TLUGrI4FbWT3eibF1xkVc1y+9jv20gVhsEO1dXYTz5rRjrZAlEE
 Le9aG831P4OkncmiUC/bdY2P05l8VXg+fkN3NdOlFwQJRZtHRw23ZyFMPs32SniV
 h/3cLuF4hKjE5StgodEhXgQhCvCdShTM9nwAYWDNqCpG+kOHcnI6qpOwJy2WoPNe
 JodDqifQgBZc8y7ut37rY9GqssT/VsgKxmhTFdherbadGYpVzF5plVhqqL/yV5OR
 KaIVZv/NVsUpXQSGGBoUYe4eZuTIoMTKlm0knN0RE0u+XMRSES5JBZ0f8A4tAc7j
 GqKG+zU83D7uJeq3Swa7/TC/8crcZ0W72kMcWpt1xmwJo3K0SFFfyoBdaltzJBxq
 pcRNHijfqWdjeDbfL3N/73BeL0Ond8ZnBhl6mlFGsM7NbA9rsMBg3IbYND24+QsV
 OmEDWRHW8i+X6MAFhQvHHRGPXblzetENTGpArKTBIyw9JxFLX476XLB8zfQw9Br2
 DUq5EREa8CM=
 =17ur
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.4/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Three fixes for omaps for v5.4-rc cycle

Two regression fixes for omap3 iommu. I missed applying two omap3
related iommu pdata quirks patches earlier because the kbuild test
robot produced errors on them for missing dependencies.

Fix ti-sysc interconnect target module driver handling for watchdog
quirk. I must have tested this earlier only with watchdog service
running, but clearly it does not do what it needs to do.

* tag 'omap-for-v5.4/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Fix watchdog quirk handling
  ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU
  ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs

Link: https://lore.kernel.org/r/pull-1571848757-282222@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-23 10:08:12 -07:00
Olof Johansson 21397ae00f A number of fixes for this release, but mostly:
- A fixup for the A10 CSI DT binding merged during the 5.4-rc1 window
   - A fix for a dt-binding error
   - Addition of phy regulator delays
   - The PMU on the A64 was found to be non-functional, so we've dropped it for now
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXa/4RQAKCRDj7w1vZxhR
 xU3XAQDYuCixpCCftKIhjcz+oultXqAJysDEE44dATwT1YfINgD/eBSwBw1l/Ni7
 yOumUvRZ1fJC3NO8e7vh9cYN9yy5tgw=
 =3/ru
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-fixes-for-5.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes

A number of fixes for this release, but mostly:
  - A fixup for the A10 CSI DT binding merged during the 5.4-rc1 window
  - A fix for a dt-binding error
  - Addition of phy regulator delays
  - The PMU on the A64 was found to be non-functional, so we've dropped it for now

* tag 'sunxi-fixes-for-5.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sun7i: Drop the module clock from the device tree
  dt-bindings: media: sun4i-csi: Drop the module clock
  media: dt-bindings: Fix building error for dt_binding_check
  arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay
  arm64: dts: allwinner: a64: Drop PMU node
  arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay

Link: https://lore.kernel.org/r/80085a57-c40f-4bed-a9c3-19858d87564e.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-23 08:34:08 -07:00
Yi Wang 7f2cbcbcaf posix-cpu-timers: Fix two trivial comments
Recent changes modified the function arguments of
thread_group_sample_cputime() and task_cputimers_expired(), but forgot to
update the comments. Fix it up.

[ tglx: Changed the argument name of task_cputimers_expired() as the pointer
  	points to an array of samples. ]

Fixes: b7be4ef136 ("posix-cpu-timers: Switch thread group sampling to array")
Fixes: 001f797143 ("posix-cpu-timers: Make expiry checks array based")
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1571643852-21848-1-git-send-email-wang.yi59@zte.com.cn
2019-10-23 14:48:24 +02:00
Ben Dooks (Codethink) 086ee46b08 timers/sched_clock: Include local timekeeping.h for missing declarations
Include the timekeeping.h header to get the declaration of the
sched_clock_{suspend,resume} functions. Fixes the following sparse
warnings:

kernel/time/sched_clock.c:275:5: warning: symbol 'sched_clock_suspend' was not declared. Should it be static?
kernel/time/sched_clock.c:286:6: warning: symbol 'sched_clock_resume' was not declared. Should it be static?

Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191022131226.11465-1-ben.dooks@codethink.co.uk
2019-10-23 14:48:23 +02:00
Thomas Gleixner 1638b8f096 lib/vdso: Make clock_getres() POSIX compliant again
A recent commit removed the NULL pointer check from the clock_getres()
implementation causing a test case to fault.

POSIX requires an explicit NULL pointer check for clock_getres() aside of
the validity check of the clock_id argument for obscure reasons.

Add it back for both 32bit and 64bit.

Note, this is only a partial revert of the offending commit which does not
bring back the broken fallback invocation in the the 32bit compat
implementations of clock_getres() and clock_gettime().

Fixes: a9446a906f ("lib/vdso/32: Remove inconsistent NULL pointer checks")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1910211202260.1904@nanos.tec.linutronix.de
2019-10-23 14:48:23 +02:00
Linus Torvalds 13b86bc4cd ARM updates for 5.4-rc:
- fix for alignment faults under high memory pressure
 - use u32 for ARM instructions in fault handler
 - mark functions that must always be inlined with __always_inline
 - fix for nommu XIP
 - fix ARMv7M switch to handler mode in reboot path
 - fix the recently introduced AMBA reset control error paths
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAl2vMJkACgkQ9OeQG+St
 rGTYCg//c999vIr6q+90NHuP3dHJfITyAXxiOrBtHJdqApgENiU4aBjBCjrmV88m
 syYTPaNEXO2h4qkdO8kdZMVu4HB2WUSEnP1mq7RX/hW1W0uBOjLFdUlRznYF+T8x
 2c2AKOeT+K5iwyMGYlmB6xK9N7OWTadz5wOtga4W1mml0GAkeeAa1Z6x151+q1PE
 eir0W5dwdQ+TN+rE2J+nNrQdSngO12EOUWGM2gei2AEcr6ItKhww2eneusdz+012
 ylrO6KHBNobace6LCC0XdJ8zF8e682sT/gnLOL+H73y7M0iGcDhBJ1fUMyeyaoDR
 RQh58bG0ixl0Gz4nEgTeCgzyLYGyGoIc7NV9RoV6ONxPC1bJ+ETyj0GRlPcUsGli
 l3ZrAsGuvSQ8EHqHZ3YVUSQOTiFjH2C7EKFAcCFSscgzcjedyqe4+rUz2nDZoc/U
 zG3gkKbYMi9ToWHCzbzaHi06G+YnwFLEH2zRZhUomemjQcgyS5P4LjCY6UcnZh1R
 6DzUEzN4Qt4N+nIU52x+klhZxS1m4Qhf/qwXWfsZASH5rkHAa2ivZ1vx88mnG9/f
 o7X6HwEDrCE59JWyAeR8gnsyWoOoRjU/jZvXAugMirkv3MamI7ogOTwPQVmFjNbM
 g65kncRITclh02L0ABD1zdUiQzKJTeUhYcXIErXNfgo+MdZAhag=
 =EBH5
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

:Pull ARM fixes from Russell King:

 - fix for alignment faults under high memory pressure

 - use u32 for ARM instructions in fault handler

 - mark functions that must always be inlined with __always_inline

 - fix for nommu XIP

 - fix ARMv7M switch to handler mode in reboot path

 - fix the recently introduced AMBA reset control error paths

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8926/1: v7m: remove register save to stack before svc
  ARM: 8914/1: NOMMU: Fix exc_ret for XIP
  ARM: 8908/1: add __always_inline to functions called from __get_user_check()
  ARM: mm: alignment: use "u32" for 32-bit instructions
  ARM: mm: fix alignment handler faults under memory pressure
  drivers/amba: fix reset control error handling
2019-10-23 06:26:33 -04:00
Linus Torvalds e969c860d5 Fix ghes_edac UAF case triggered by KASAN and DEBUG_TEST_DRIVER_REMOVE.
Future pending rework of the ghes_edac instances registration will do
 away with the single memory controller per system model and that ugly
 hackery there.
 
 This is a minimal fix for stable@, courtesy of James Morse.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl2v/h4ACgkQEsHwGGHe
 VUrBTw//UqWfFXV+82L6u98j4wAduGxJLGHu9q+bFS8G/sqw32/WGIzzsoImD4Ta
 Xn3gRlQLc5zQTNNOaWh9jR3VtZsVvykLtTkIPzY/cGb78/kQbfycmIACUVKaBTdw
 PUZ9dTev/PAnctotePfcUan78pDmo3LBhI5Y9ZvWdE4CelOP/+QaH8dFa/LNSe7t
 jZMuJ1H6fA8wgD/i/eO4dDnvzhykf58oFyZMrdlO6GCwPCYu9CbLHgqWCqfG73IF
 R6xIf7aoebnQOGqcwsJuY5n33wgmNyBQcOWVbBKAuv5ffVMobvxZ0dth2pS1Kulx
 gQSI7Mt+FqL9xO9mY3GkkhcAZvANFPjgNRARUDwYFpy+Iihg2z24DdTDXTG+51Ps
 JyeEZx1HgA7oCkBftphuVd7l/mmocI789j/k4rn1AHyPi8/GyYPV3KatikTCbRKc
 BL7dvzYSLg1nESiiwXHuZssWT75IoIgNFvEpwJcao074YNFfaCg03Dev5v440c2Q
 CdqHIZbcl7sDlmRAdbcd7gu2HSnr2wqbmDKfSpNY3ks9e3PjzQOfjDZ/vxSbPz5G
 1Dqv2vsPGCfeBGxbzTRBTK7+PPowoWkqhPp2OvDi0WUkMWrlO/+ZeNw9JU4ri4S7
 4eUXfLlBhD6COJDCT+4edxLcjtG2zvDCZIutNvWvs5IZAXtZpMQ=
 =6R9z
 -----END PGP SIGNATURE-----

Merge tag 'edac_urgent_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras

Pull EDAC fix from Borislav Petkov:
 "Fix ghes_edac UAF case triggered by KASAN and DEBUG_TEST_DRIVER_REMOVE.

  Future pending rework of the ghes_edac instances registration will do
  away with the single memory controller per system model and that ugly
  hackery there.

  This is a minimal fix for stable@, courtesy of James Morse"

* tag 'edac_urgent_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/ghes: Fix Use after free in ghes_edac remove path
2019-10-23 06:19:07 -04:00
Linus Torvalds 54955e3bfd for-5.4-rc4-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAl2vBPgACgkQxWXV+ddt
 WDvaGQ/+JbV05ML7QjufNFKjzojNPg8dOwvLqF58askMEAqzyqOrzu1YsIOjchqv
 eZPP+wxh6j6i8LFnbaMYRhSVMlgpK9XOR3tNStp73QlSox6/6VKu7XR4wFXAoip3
 l4XI8UqO5XqDG55UTtjKyo2VNq8vgq1gRUWD6hPtfzDP6WYj4JZuXOd+dT6PbP32
 VHd91RoB8Z8qmypLF9Sju6IBWNhKl91TjlRqVdfLywaK8azqaxE1UttPf5DVbE6+
 MlTuXhuxkNc4ddzj//oJ1s3ZP/nXtFmIZ75+Sd6P5DfqRNeIfjkKqXvffsjqoYVI
 1Wv9sDiezxRB1RZjfInhtqvdvsqcsrXrM7x6BRVqI7IZDUaH5em8IoozQT62ze/4
 MJBrRIbVodx2I7EVDMNGkx2TaIDAfnW4Z3UC+YSHLoy6jht1+SA5KLQDR1G/4NeR
 dWht5wOXwhp8P3DoaczTUpk0DLtAtygj04fH8CG277EILLCpuWwW8iRkPttkrIM2
 HrtRKrKFJNyEpq9vHSFVvpQJkzgzqBFs1UnqnEuYh6qNgWCrS4PJDu9geQ8aPGr2
 pA5aEqg5b+jjWzIYDP93PF0u7kF4mFVAozn6xMf95FKmM1OupYYQg5BRe7n/DfDu
 yh3Ms0Mmd9+snpNJ9lDr40cobHC5CDvfvO2SRERyBeXxARainN0=
 =Ft+G
 -----END PGP SIGNATURE-----

Merge tag 'for-5.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

 - fixes of error handling cleanup of metadata accounting with qgroups
   enabled

 - fix swapped values for qgroup tracepoints

 - fix race when handling full sync flag

 - don't start unused worker thread, functionality removed already

* tag 'for-5.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: check for the full sync flag while holding the inode lock during fsync
  Btrfs: fix qgroup double free after failure to reserve metadata for delalloc
  btrfs: tracepoints: Fix bad entry members of qgroup events
  btrfs: tracepoints: Fix wrong parameter order for qgroup events
  btrfs: qgroup: Always free PREALLOC META reserve in btrfs_delalloc_release_extents()
  btrfs: don't needlessly create extent-refs kernel thread
  btrfs: block-group: Fix a memory leak due to missing btrfs_put_block_group()
  Btrfs: add missing extents release on file extent cluster relocation error
2019-10-23 06:14:29 -04:00
Jessica Yu 0968495005 scripts/nsdeps: use alternative sed delimiter
When doing an out of tree build with O=, the nsdeps script constructs
the absolute pathname of the module source file so that it can insert
MODULE_IMPORT_NS statements in the right place. However, ${srctree}
contains an unescaped path to the source tree, which, when used in a sed
substitution, makes sed complain:

++ sed 's/[^ ]* *//home/jeyu/jeyu-linux\/&/g'
sed: -e expression #1, char 12: unknown option to `s'

The sed substitution command 's' ends prematurely with the forward
slashes in the pathname, and sed errors out when it encounters the 'h',
which is an invalid sed substitution option. To avoid escaping forward
slashes ${srctree}, we can use '|' as an alternative delimiter for
sed instead to avoid this error.

Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-10-23 11:21:06 +02:00
Rafael J. Wysocki 028db79cf4 Merge branch 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) framework fixes for v5.4
from Viresh Kumar:

"This contains:

- Patch to revert addition of regulator enable/disable in OPP core
  (Marek).
- Remove incorrect lockdep assert (Viresh).
- Fix a kref counting issue (Viresh)."

* 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  opp: Reinitialize the list_kref before adding the static OPPs again
  opp: core: Revert "add regulators enable and disable"
  opp: of: drop incorrect lockdep_assert_held()
2019-10-23 10:26:25 +02:00
Yoshihiro Shimoda 4bd5ead82d phy: renesas: rcar-gen3-usb2: Fix sysfs interface of "role"
Since the role_store() uses strncmp(), it's possible to refer
out-of-memory if the sysfs data size is smaller than strlen("host").
This patch fixes it by using sysfs_streq() instead of strncmp().

Reported-by: Pavel Machek <pavel@denx.de>
Fixes: 9bb86777fb ("phy: rcar-gen3-usb2: add sysfs for usb role swap")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23 13:20:37 +05:30
Nagarjuna Kristam a8a24429dd phy: tegra: xusb: Add vbus override support on Tegra186
Tegra XUSB device control driver needs to control vbus override
during its operations, add API for the support.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23 13:20:36 +05:30
Nagarjuna Kristam 90767cdfea phy: tegra: xusb: Add vbus override support on Tegra210
Tegra XUSB device control driver needs to control vbus override
during its operations, add API for the support.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23 13:20:36 +05:30
Nagarjuna Kristam a5be28c365 phy: tegra: xusb: Add usb3 port fake support on Tegra210
On Tegra210, usb2 only otg/peripheral ports dont work in device mode.
They need an assosciated usb3 port to work in device mode. Identify
an unused usb3 port and assign it as a fake USB3 port to USB2 only
port whose mode is otg/peripheral.

Based on work by BH Hsieh <bhsieh@nvidia.com>.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23 13:20:34 +05:30
Nagarjuna Kristam ac25b6e9f8 phy: tegra: xusb: Add XUSB dual mode support on Tegra210
Configure the port capabilities based on usb_dr_mode settings.

Based on work by JC Kuo <jckuo@nvidia.com>.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Reviewed-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23 13:20:33 +05:30
Fabrizio Castro 3f6d43a66e dt-bindings: rcar-gen3-phy-usb3: Add r8a774b1 support
Document RZ/G2N (R8A774B1) SoC bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23 13:20:32 +05:30
Fabrizio Castro 700d380242 dt-bindings: rcar-gen3-phy-usb2: Add r8a774b1 support
Document RZ/G2N (R8A774B1) SoC bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23 13:20:32 +05:30
Ben Dooks 1025cb924b phy: phy-brcm-usb-init: fix use of integer as pointer
The xhci_ec_base variable is a pointer, so don't compare
it with an integer.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23 13:20:31 +05:30
Ben Dooks e4b957d3a7 phy: phy-brcm-usb-init: fix __iomem annotations
The register address should have __iomem attributes
so fix this to remove the following sparse warnings:

drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:459:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:459:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:461:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:461:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:465:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:465:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:469:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:469:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:478:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:478:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:480:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:480:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:485:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:485:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:494:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:494:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:495:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:495:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:498:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:498:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:501:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:501:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:613:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:613:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:640:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:640:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:710:64: warning: Using plain integer as NULL pointer
drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:712:32:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:712:32:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:713:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:713:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:717:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:717:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:720:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:720:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:721:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:721:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:794:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:794:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:813:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:813:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:829:37:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:829:37:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:843:37:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:843:37:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:847:37:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:847:37:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:878:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:878:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:880:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:880:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:896:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:896:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:901:37:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:901:37:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:905:37:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:905:37:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: too many warnings

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23 13:20:31 +05:30
YueHaibing fa09344014 phy: hisilicon: use devm_platform_ioremap_resource() to simplify code
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23 13:20:28 +05:30
Geert Uytterhoeven c9dfadeee8 phy: renesas: rcar-gen3-usb2: Use platform_get_irq_optional() for optional irq
As platform_get_irq() now prints an error when the interrupt does not
exist, a scary warning may be printed for an optional interrupt:

    phy_rcar_gen3_usb2 ee0a0200.usb-phy: IRQ index 0 not found

Fix this by calling platform_get_irq_optional() instead.

Fixes: 7723f4c5ec ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23 13:20:27 +05:30
Markus Elfring 265938bb1b phy-mvebu-a3700-utmi: Use devm_platform_ioremap_resource() in mvebu_a3700_utmi_phy_probe()
Simplify this function implementation by using a known wrapper function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23 13:20:27 +05:30
Chunfeng Yun f466de0208 phy: tegra: xusb: remove unused variable
The local variable @priv is set but not used, can be removed

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23 13:20:26 +05:30
Colin Ian King fbf6a7a4c9 phy: xgene: make array serdes_reg static const, makes object smaller
Don't populate the array serdes_reg on the stack but instead make it
static const. Makes the object code smaller by 228 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  23875	   6232	     64	  30171	   75db	drivers/phy/phy-xgene.o

After:
   text	   data	    bss	    dec	    hex	filename
  23551	   6328	     64	  29943	   74f7	drivers/phy/phy-xgene.o

(gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23 13:20:26 +05:30