Commit Graph

84 Commits

Author SHA1 Message Date
Yan, Zheng 3f99969f42 ceph: acquire i_mutex in __ceph_do_pending_vmtruncate
make __ceph_do_pending_vmtruncate() acquire the i_mutex if the caller
does not hold the i_mutex, so ceph_aio_read() can call safely.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
2013-05-01 21:16:11 -07:00
Yan, Zheng a8673d61ad ceph: use I_COMPLETE inode flag instead of D_COMPLETE flag
commit c6ffe10015 moved the flag that tracks if the dcache contents
for a directory are complete to dentry. The problem is there are
lots of places that use ceph_dir_{set,clear,test}_complete() while
holding i_ceph_lock. but ceph_dir_{set,clear,test}_complete() may
sleep because they call dput().

This patch basically reverts that commit. For ceph_d_prune(), it's
called with both the dentry to prune and the parent dentry are
locked. So it's safe to access the parent dentry's d_inode and
clear I_COMPLETE flag.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2013-05-01 21:14:33 -07:00
Linus Torvalds d895cb1af1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
2013-02-26 20:16:07 -08:00
Sage Weil 79f9f99ad1 ceph: prepopulate inodes only when request is aborted
If r_aborted is true, we do not hold the dir i_mutex, and cannot touch
the dcache.  However, we still need to update the inodes with the state
returned by the MDS.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-26 02:46:08 -05:00
Eric W. Biederman bd2bae6a66 ceph: Convert kuids and kgids before printing them.
Before printing kuid and kgids values convert them into
the initial user namespace.

Cc: Sage Weil <sage@inktank.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-12 03:19:27 -08:00
Eric W. Biederman ab871b903e ceph: Translate inode uid and gid attributes to/from kuids and kgids.
- In fill_inode() transate uids and gids in the initial user namespace
  into kuids and kgids stored in inode->i_uid and inode->i_gid.

- In ceph_setattr() if they have changed convert inode->i_uid and
  inode->i_gid into initial user namespace uids and gids for
  transmission.

Cc: Sage Weil <sage@inktank.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-12 03:19:25 -08:00
Linus Torvalds 40889e8d9f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph update from Sage Weil:
 "There are a few different groups of commits here.  The largest is
  Alex's ongoing work to enable the coming RBD features (cloning,
  striping).  There is some cleanup in libceph that goes along with it.

  Cyril and David have fixed some problems with NFS reexport (leaking
  dentries and page locks), and there is a batch of patches from Yan
  fixing problems with the fs client when running against a clustered
  MDS.  There are a few bug fixes mixed in for good measure, many of
  which will be going to the stable trees once they're upstream.

  My apologies for the late pull.  There is still a gremlin in the rbd
  map/unmap code and I was hoping to include the fix for that as well,
  but we haven't been able to confirm the fix is correct yet; I'll send
  that in a separate pull once it's nailed down."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (68 commits)
  rbd: get rid of rbd_{get,put}_dev()
  libceph: register request before unregister linger
  libceph: don't use rb_init_node() in ceph_osdc_alloc_request()
  libceph: init event->node in ceph_osdc_create_event()
  libceph: init osd->o_node in create_osd()
  libceph: report connection fault with warning
  libceph: socket can close in any connection state
  rbd: don't use ENOTSUPP
  rbd: remove linger unconditionally
  rbd: get rid of RBD_MAX_SEG_NAME_LEN
  libceph: avoid using freed osd in __kick_osd_requests()
  ceph: don't reference req after put
  rbd: do not allow remove of mounted-on image
  libceph: Unlock unprocessed pages in start_read() error path
  ceph: call handle_cap_grant() for cap import message
  ceph: Fix __ceph_do_pending_vmtruncate
  ceph: Don't add dirty inode to dirty list if caps is in migration
  ceph: Fix infinite loop in __wake_requests
  ceph: Don't update i_max_size when handling non-auth cap
  bdi_register: add __printf verification, fix arg mismatch
  ...
2012-12-20 14:00:13 -08:00
Yan, Zheng a85f50b6ef ceph: Fix __ceph_do_pending_vmtruncate
we should set i_truncate_pending to 0 after page cache is truncated
to i_truncate_size

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
2012-12-13 08:13:08 -06:00
Al Viro 2744c171db ceph: don't abuse d_delete() on failure exits
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26 22:20:20 -04:00
Sage Weil 6c5e50fa61 ceph: tolerate (and warn on) extraneous dentry from mds
If the MDS gives us a dentry and we weren't prepared to handle it,
WARN_ON_ONCE instead of crashing.

Reported-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-08-21 15:55:25 -07:00
Xi Wang 810339ec2f ceph: avoid panic with mismatched symlink sizes in fill_inode()
Return -EINVAL rather than panic if iinfo->symlink_len and inode->i_size
do not match.

Also use kstrndup rather than kmalloc/memcpy.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:45 -05:00
Linus Torvalds 1a52bb0b68 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: ensure prealloc_blob is in place when removing xattr
  rbd: initialize snap_rwsem in rbd_add()
  ceph: enable/disable dentry complete flags via mount option
  vfs: export symbol d_find_any_alias()
  ceph: always initialize the dentry in open_root_dentry()
  libceph: remove useless return value for osd_client __send_request()
  ceph: avoid iput() while holding spinlock in ceph_dir_fsync
  ceph: avoid useless dget/dput in encode_fh
  ceph: dereference pointer after checking for NULL
  crush: fix force for non-root TAKE
  ceph: remove unnecessary d_fsdata conditional checks
  ceph: Use kmemdup rather than duplicating its implementation

Fix up conflicts in fs/ceph/super.c (d_alloc_root() failure handling vs
always initialize the dentry in open_root_dentry)
2012-01-13 10:29:21 -08:00
Yehuda Sadeh b8cd952b51 ceph: dereference pointer after checking for NULL
moved dereference after BUG_ON

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-01-10 08:56:59 -08:00
Al Viro 6b520e0565 vfs: fix the stupidity with i_dentry in inode destructors
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else.  Not to mention the removal of
boilerplate code from ->destroy_inode() instances...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:40 -05:00
Sage Weil be655596b3 ceph: use i_ceph_lock instead of i_lock
We have been using i_lock to protect all kinds of data structures in the
ceph_inode_info struct, including lists of inodes that we need to iterate
over while avoiding races with inode destruction.  That requires grabbing
a reference to the inode with the list lock protected, but igrab() now
takes i_lock to check the inode flags.

Changing the list lock ordering would be a painful process.

However, using a ceph-specific i_ceph_lock in the ceph inode instead of
i_lock is a simple mechanical change and avoids the ordering constraints
imposed by igrab().

Reported-by: Amon Ott <a.ott@m-privacy.de>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-07 10:46:44 -08:00
Sage Weil 15a2015fbc ceph: fix iput race when queueing inode work
If we queue a work item that calls iput(), make sure we ihold() before
attempting to queue work. Otherwise our queued work might miraculously run
before we notice the queue_work() succeeded and call ihold(), allowing the
inode to be destroyed.

That is, instead of

	if (queue_work(...))
		ihold();

we need to do

	ihold();
	if (!queue_work(...))
		iput();

Reported-by: Amon Ott <a.ott@m-privacy.de>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-05 22:06:31 -07:00
Sage Weil c6ffe10015 ceph: use new D_COMPLETE dentry flag
We used to use a flag on the directory inode to track whether the dcache
contents for a directory were a complete cached copy.  Switch to a dentry
flag CEPH_D_COMPLETE that is safely updated by ->d_prune().

Signed-off-by: Sage Weil <sage@newdream.net>
2011-11-05 21:10:10 -07:00
Miklos Szeredi bfe8684869 filesystems: add set_nlink()
Replace remaining direct i_nlink updates with a new set_nlink()
updater function.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02 12:53:43 +01:00
Sage Weil 83eaea22bd Revert "ceph: don't truncate dirty pages in invalidate work thread"
This reverts commit c9af9fb68e.

We need to block and truncate all pages in order to reliably invalidate
them.  Otherwise, we could:

 - have some uptodate pages in the cache
 - queue an invalidate
 - write(2) locks some pages
 - invalidate_work skips them
 - write(2) only overwrites part of the page
 - page now dirty and uptodate
 -> partial leakage of invalidated data

It's not entirely clear why we started skipping locked pages in the first
place.  I just ran this through fsx and didn't see any problems.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-10-25 16:10:16 -07:00
Linus Torvalds ba5b56cb3e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (23 commits)
  ceph: document unlocked d_parent accesses
  ceph: explicitly reference rename old_dentry parent dir in request
  ceph: document locking for ceph_set_dentry_offset
  ceph: avoid d_parent in ceph_dentry_hash; fix ceph_encode_fh() hashing bug
  ceph: protect d_parent access in ceph_d_revalidate
  ceph: protect access to d_parent
  ceph: handle racing calls to ceph_init_dentry
  ceph: set dir complete frag after adding capability
  rbd: set blk_queue request sizes to object size
  ceph: set up readahead size when rsize is not passed
  rbd: cancel watch request when releasing the device
  ceph: ignore lease mask
  ceph: fix ceph_lookup_open intent usage
  ceph: only link open operations to directory unsafe list if O_CREAT|O_TRUNC
  ceph: fix bad parent_inode calc in ceph_lookup_open
  ceph: avoid carrying Fw cap during write into page cache
  libceph: don't time out osd requests that haven't been received
  ceph: report f_bfree based on kb_avail rather than diffing.
  ceph: only queue capsnap if caps are dirty
  ceph: fix snap writeback when racing with writes
  ...
2011-07-26 13:38:50 -07:00
Sage Weil 4f17726452 ceph: document locking for ceph_set_dentry_offset
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 11:31:08 -07:00
Sage Weil 5f21c96dd5 ceph: protect access to d_parent
d_parent is protected by d_lock: use it when looking up a dentry's parent
directory inode.  Also take a reference and drop it in the caller to avoid
a use-after-free.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 11:30:29 -07:00
Sage Weil dfabbed6fd ceph: set dir complete frag after adding capability
Curretly ceph_add_cap clears the complete bit if we are newly issued the
FILE_SHARED cap, which is normally the case for a newly issue cap on a new
directory.  That means we clear the just-set bit.  Move the check that sets
the flag to after the cap is added/updated.

Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 11:30:02 -07:00
Sage Weil 2f90b852e3 ceph: ignore lease mask
The lease mask is no longer used (and it changed a while back).  Instead,
use a non-zero duration to indicate that there is a lease being issued.

Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 11:28:25 -07:00
Al Viro 10556cb21a ->permission() sanitizing: don't pass flags to ->permission()
not used by the instances anymore.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:43:24 -04:00
Al Viro 2830ba7f34 ->permission() sanitizing: don't pass flags to generic_permission()
redundant; all callers get it duplicated in mask & MAY_NOT_BLOCK and none of
them removes that bit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:43:22 -04:00
Al Viro 178ea73521 kill check_acl callback of generic_permission()
its value depends only on inode and does not change; we might as
well store it in ->i_op->check_acl and be done with that.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:43:16 -04:00
Sage Weil 70b666c3b4 ceph: use ihold when we already have an inode ref
We should use ihold whenever we already have a stable inode ref, even
when we aren't holding i_lock.  This avoids adding new and unnecessary
locking dependencies.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-06-07 21:34:11 -07:00
Henry C Chang d3d0720d4a ceph: do not use i_wrbuffer_ref as refcount for Fb cap
We increments i_wrbuffer_ref when taking the Fb cap. This breaks
the dirty page accounting and causes looping in
__ceph_do_pending_vmtruncate, and ceph client hangs.

This bug can be reproduced occasionally by running blogbench.

Add a new field i_wb_ref to inode and dedicate it to Fb reference
counting.

Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-11 10:44:48 -07:00
Sage Weil fca65b4ad7 ceph: do not call __mark_dirty_inode under i_lock
The __mark_dirty_inode helper now takes i_lock as of 250df6ed.  Fix the
one ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the
flags value so that the callers can do it outside of i_lock.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-04 12:56:45 -07:00
Yehuda Sadeh ad1fee96cb ceph: add ino32 mount option
The ino32 mount option forces the ceph fs to report 32 bit
ino values.  This is useful for 64 bit kernels with 32 bit userspace.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-03-21 12:24:22 -07:00
Sage Weil 09adc80c61 ceph: preserve I_COMPLETE across rename
d_move puts the renamed dentry at the end of d_subdirs, screwing with our
cached dentry directory offsets.  We were just clearing I_COMPLETE to avoid
any possibility of trouble.  However, assigning the renamed dentry an
offset at the end of the directory (to match it's new d_subdirs position)
is sufficient to maintain correct behavior and hold onto I_COMPLETE.

This is especially important for workloads like rsync, which renames files
into place.  Before, we would lose I_COMPLETE and do MDS lookups for each
file.  With this patch we only talk to the MDS on create and rename.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-15 09:14:03 -07:00
Sage Weil b545cc1505 ceph: do not set I_COMPLETE
Do not set the I_COMPLETE flag on directories until we resolve races with
dcache pruning.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-03 10:09:51 -08:00
Linus Torvalds b12ece7d85 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: avoid picking MDS that is not active
  ceph: avoid immediate cap check after import
  ceph: fix flushing of caps vs cap import
  ceph: fix erroneous cap flush to non-auth mds
  ceph: fix cap_wanted_delay_{min,max} mount option initialization
  ceph: fix xattr rbtree search
  ceph: fix getattr on directory when using norbytes
2011-01-28 12:12:58 +10:00
Yehuda Sadeh 1c1266bb91 ceph: fix getattr on directory when using norbytes
The norbytes mount option was broken, and when doing getattr
on a directory it return the rbytes instead of the number of
entities. This commit fixes it.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-13 15:50:06 -08:00
Linus Torvalds a170315420 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: fix cleanup when trying to mount inexistent image
  net/ceph: make ceph_msgr_wq non-reentrant
  ceph: fsc->*_wq's aren't used in memory reclaim path
  ceph: Always free allocated memory in osdmap_decode()
  ceph: Makefile: Remove unnessary code
  ceph: associate requests with opening sessions
  ceph: drop redundant r_mds field
  ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS
  ceph: add dir_layout to inode
2011-01-13 10:25:24 -08:00
Sage Weil 14303d20f3 ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS
This implements the DIRLAYOUTHASH protocol feature, which passes the dir
layout over the wire from the MDS.  This gives the client knowledge
of the correct hash function to use for mapping dentries among dir
fragments.

Note that if this feature is _not_ present on the client but is on the
MDS, the client may misdirect requests.  This will result in a forward
and degrade performance.  It may also result in inaccurate NFS filehandle
generation, which will prevent fh resolution when the inode is not present
in the client cache and the parent directories have been fragmented.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-12 15:15:13 -08:00
Sage Weil 6c0f3af72c ceph: add dir_layout to inode
Add a ceph_dir_layout to the inode, and calculate dentry hash values based
on the parent directory's specified dir_hash function.  This is needed
because the old default Linux dcache hash function is extremely week and
leads to a poor distribution of files among dir fragments.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-12 15:15:12 -08:00
Nick Piggin b74c79e993 fs: provide rcu-walk aware permission i_ops
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:29 +11:00
Nick Piggin fa0d7e3de6 fs: icache RCU free inodes
RCU free the struct inode. This will allow:

- Subsequent store-free path walking patch. The inode must be consulted for
  permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
  to take i_lock no longer need to take sb_inode_list_lock to walk the list in
  the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
  page lock to follow page->mapping.

The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.

In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.

The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:26 +11:00
Nick Piggin b5c84bf6f6 fs: dcache remove dcache_lock
dcache_lock no longer protects anything. remove it.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:23 +11:00
Nick Piggin 2fd6b7f507 fs: dcache scale subdirs
Protect d_subdirs and d_child with d_lock, except in filesystems that aren't
using dcache_lock for these anyway (eg. using i_mutex).

Note: if we change the locking rule in future so that ->d_child protection is
provided only with ->d_parent->d_lock, it may allow us to reduce some locking.
But it would be an exception to an otherwise regular locking scheme, so we'd
have to see some good results. Probably not worthwhile.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:21 +11:00
Nick Piggin b7ab39f631 fs: dcache scale dentry refcount
Make d_count non-atomic and protect it with d_lock. This allows us to ensure a
0 refcount dentry remains 0 without dcache_lock. It is also fairly natural when
we start protecting many other dentry members with d_lock.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 17:50:21 +11:00
Linus Torvalds 76db8ac45f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: fix readdir EOVERFLOW on 32-bit archs
  ceph: fix frag offset for non-leftmost frags
  ceph: fix dangling pointer
  ceph: explicitly specify page alignment in network messages
  ceph: make page alignment explicit in osd interface
  ceph: fix comment, remove extraneous args
  ceph: fix update of ctime from MDS
  ceph: fix version check on racing inode updates
  ceph: fix uid/gid on resent mds requests
  ceph: fix rdcache_gen usage and invalidate
  ceph: re-request max_size if cap auth changes
  ceph: only let auth caps update max_size
  ceph: fix open for write on clustered mds
  ceph: fix bad pointer dereference in ceph_fill_trace
  ceph: fix small seq message skipping
  Revert "ceph: update issue_seq on cap grant"
2010-11-19 15:32:22 -08:00
Arnd Bergmann 451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Sage Weil b7495fc2ff ceph: make page alignment explicit in osd interface
We used to infer alignment of IOs within a page based on the file offset,
which assumed they matched.  This broke with direct IO that was not aligned
to pages (e.g., 512-byte aligned IO).  We were also trusting the alignment
specified in the OSD reply, which could have been adjusted by the server.

Explicitly specify the page alignment when setting up OSD IO requests.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-09 12:43:12 -08:00
Sage Weil d8672d64b8 ceph: fix update of ctime from MDS
The client can have a newer ctime than the MDS due to AUTH_EXCL and
XATTR_EXCL caps as well; update the check in ceph_fill_file_time
appropriately.

This fixes cases where ctime/mtime goes backward under the right sequence
of local updates (e.g. chmod) and mds replies (e.g. subsequent stat that
goes to the MDS).

Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-08 09:24:34 -08:00
Sage Weil 8bd59e0188 ceph: fix version check on racing inode updates
We may get updates on the same inode from multiple MDSs; generally we only
pay attention if the update is newer than what we already have.  The
exception is when an MDS sense unstable information, in which case we
always update.

The old > check got this wrong when our version was odd (e.g. 3) and the
reply version was even (e.g. 2): the older stale (v2) info would be
applied.  Fixed and clarified the comment.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-08 09:23:12 -08:00
Sage Weil cd045cb42a ceph: fix rdcache_gen usage and invalidate
We used to use rdcache_gen to indicate whether we "might" have cached
pages.  Now we just look at the mapping to determine that.  However, some
old behavior remains from that transition.

First, rdcache_gen == 0 no longer means we have no pages.  That can happen
at any time (presumably when we carry FILE_CACHE).  We should not reset it
to zero, and we should not check that it is zero.

That means that the only purpose for rdcache_revoking is to resolve races
between new issues of FILE_CACHE and an async invalidate.  If they are
equal, we should invalidate.  On success, we decrement rdcache_revoking,
so that it is no longer equal to rdcache_gen.  Similarly, if we success
in doing a sync invalidate, set revoking = gen - 1.  (This is a small
optimization to avoid doing unnecessary invalidate work and does not
affect correctness.)

Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-08 07:29:05 -08:00
Sage Weil 912a9b0319 ceph: only let auth caps update max_size
Only the auth MDS has a meaningful max_size value for us, so only update it
in fill_inode if we're being issued an auth cap.  Otherwise, a random
stat result from a non-auth MDS can clobber a meaningful max_size, get
the client<->mds cap state out of sync, and make writes hang.

Specifically, even if the client re-requests a larger max_size (which it
will), the MDS won't respond because as far as it knows we already have a
sufficiently large value.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-07 09:39:21 -08:00