Use no-op messages in place of cross-partition interrupts when nacking a
put message in the GRU. This allows us to remove MMR's as a destination
from the GRU driver.
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160429215406.012228480@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch builds support for the new conversions of physical addresses
to and from sockets, pnodes and nodes in UV4. It is designed to be as
efficient as possible as lookups are done inside an interrupt context
in some cases. It will be further optimized when physical hardware is
available to measure execution time.
Tested-by: Dimitri Sivanich <sivanich@sgi.com>
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160429215405.841051741@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
An aspect of the UV4 system architecture changes involve changing the
way sockets, nodes, and pnodes are translated between one another.
Decode the information from the BIOS provided EFI system table to build
the needed conversion tables.
Tested-by: Dimitri Sivanich <sivanich@sgi.com>
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160429215405.673495324@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With the UV4 system architecture addressing changes, BIOS now provides
this information via an EFI system table. This is the initial decoding
of that system table. It also collects the sizing information for
later allocation of dynamic conversion tables.
Tested-by: Dimitri Sivanich <sivanich@sgi.com>
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160429215405.503022681@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
UV4 uses a GAM (globally addressed memory) architecture that supports
variable sized memory per node. This replaces the old "M" value (number
of address bits per node) with a range table for conversions between
addresses and physical node (pnode) id's. This table is obtained from UV
BIOS via the EFI UVsystab table. Support for older EFI UVsystab tables
is maintained.
Tested-by: Dimitri Sivanich <sivanich@sgi.com>
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160429215405.329827545@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Migrate references from the blade info structs to the per node hub info
structs. This phases out the allocation of the list of per blade info
structs on node 0, in favor of a per node hub info struct allocated on
the node's local memory.
There are also some minor cosemetic changes in the comments and whitespace
to clean things up a bit.
Tested-by: Dimitri Sivanich <sivanich@sgi.com>
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160429215404.987204515@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Allocate and setup per node hub info structs. CPU 0/Node 0 hub info
is statically allocated to be accessible early in system startup. The
remaining hub info structs are allocated on the node's local memory,
and shared among the CPU's on that node. This leaves the small amount
of info unique to each CPU in the per CPU info struct.
Memory is saved by combining the common per node info fields to common
node local structs. In addtion, since the info is read only only after
setup, it should stay in the L3 cache of the local processor socket.
This should therefore improve the cache hit rate when a group of cpus
on a node are all interrupted for a common task.
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Reviewed-by: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160429215404.813051625@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move references to blade local processor ID to the new per cpu info
structs. Create an access function that makes this move, and other
potential moves opaque to callers of this function. Define a flag
that indicates to callers in external GPL modules that this function
replaces any local definition. This allows calling source code to be
built for both pre-UV4 kernels as well as post-UV4 kernels.
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160429215404.644173122@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change the references to the SCIR fields to the new per cpu info structs.
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160429215404.452538234@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The major portion of the hub info is common to all cpus on that hub.
This is step one of moving the per cpu hub info to a per node hub info
struct. This patch creates the small per cpu info struct that will
contain only information specific to each CPU.
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160429215404.282265563@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Clean up any redundancies caused by new UV4 MMR definitions superseding
any previously definitions local to functions.
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Reviewed-by: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160429215403.934728974@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This adds the MMR definitions for UV4 via an automated script that uses
the output from a hardware verilog code to symbol converter. The large
number of insertions is caused by the UV4 design changing many similarly
named fields in MMR's that are named the same. This prompted the extra
production of architecture dependent field defines.
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160429215403.580158916@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cleanup patch to rearrange code and modify some defines so the next
patch, the new UV4 MMR definitions can be merged cleanly.
* Clean up the M/N related address constants (M is # of address bits per
blade, N is the # of blade selection bits per SSI/partition).
* Fix the lookup of the alias overlay addresses and NMI definitions to
allow for flexibility in newer UV architecture types.
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160429215403.401604203@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add defines to control which UV architectures are supported, and modify the
'if (is_uvX_*)' functions to return constant 0 for those not supported.
This will help optimize code paths when support for specific UV arches
is removed.
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160429215402.897143440@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For several years, the common practice has been to boot UVs with the
"nobau" parameter on the command line, to disable the BAU. We've
decided that it makes more sense to just disable the BAU by default in
the kernel, and provide the option to turn it on, if desired.
For now, having the on/off switch doesn't buy us any more than just
reversing the logic would, but we're working towards having the BAU
enabled by default on UV4. When those changes are in place, having the
on/off switch will make more sense than an enable flag, since the
default behavior will be different depending on the system version.
I've also added a bit of documentation for the new parameter to
Documentation/kernel-parameters.txt.
Signed-off-by: Alex Thorlton <athorlton@sgi.com>
Reviewed-by: Hedi Berriche <hedi@sgi.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1459451909-121845-1-git-send-email-athorlton@sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
UV: NMI: insert this_cpu_read accessor function on uv_hub_nmi.
On SGI UV systems a 'power nmi' command from the CMC causes
all processors to drop into uv_handle_nmi(). With the 4.0
kernel this results in
BUG: unable to handle kernel paging request
The bug is caused by the current code trying to use the PER_CPU
variable uv_cpu_nmi.hub without an appropriate accessor
function. That oversight occurred in
commit e16321709c ("uv: Replace __get_cpu_var")
Author: Christoph Lameter <cl@linux.com>
Date: Sun Aug 17 12:30:41 2014 -0500
This patch inserts this_cpu_read() in the uv_hub_nmi macro
restoring the intended functionality.
Signed-off-by: George Beshers <gbeshers@sgi.com>
Acked-by: Mike Travis <travis@sgi.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Hedi Berriche <hedi@sgi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have encountered hardware with 18 cores/socket that gives 36 CPUs/socket
with hyperthreading enabled. This exceeds the current MAX_CPUS_PER_SOCKET
causing a failure in get_cpu_topology. Increase MAX_CPUS_PER_SOCKET to 64
and MAX_CPUS_PER_UVHUB to 128.
Signed-off-by: James Custer <jcuster@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Link: http://lkml.kernel.org/r/1414952199-185319-1-git-send-email-jcuster@sgi.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Update of TLB shootdown code for UV3.
Kernel function native_flush_tlb_others() calls
uv_flush_tlb_others() on UV to invalidate tlb page definitions
on remote cpus. The UV systems have a hardware 'broadcast assist
unit' which can be used to broadcast shootdown messages to all
cpu's of selected nodes.
The behavior of the BAU has changed only slightly with UV3:
- UV3 is recognized with is_uv3_hub().
- UV2 functions and structures (uv2_xxx) are in most cases
simply renamed to uv2_3_xxx.
- Some UV2 error workarounds are not needed for UV3.
(see uv_bau_message_interrupt and enable_timeouts)
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Link: http://lkml.kernel.org/r/E1WkgWh-0001yJ-3K@eag09.americas.sgi.com
[ Removed a few linebreak uglies. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The value of n_lshift for UV is currently set based on the
socket m_val.
For UV3, set the n_lshift value based on the GAM_GR_CONFIG MMR.
This will allow bios to control the n_lshift value independent
of the socket m_val. Then n_lshift can be assigned a fixed value
across a multi-partition system, allowing for a fixed common
global physical address format that is independent of socket
m_val.
Cleanup unneeded macros.
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Link: http://lkml.kernel.org/r/20140331143700.GB29916@sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make uv_register_nmi_notifier() and uv_handle_nmi_ping() static
to address sparse warnings.
Fix problem where uv_nmi_kexec_failed is unused when
CONFIG_KEXEC is not defined.
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Hedi Berriche <hedi@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20140114162551.480872353@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit 8eba18428a.
uv_trace() is not used by anything, nor is uv_trace_nmi_func, nor
uv_trace_func.
That's not how we do instrumentation code in the kernel: we add
tracepoints, printk()s, etc. so that everyone not just those with
magic kernel modules can debug a system.
So remove this unused (and misguied) piece of code.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mike Travis <travis@sgi.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Hedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/n/tip-tumfBffmr4jmnt8Gyxanoblg@git.kernel.org
This patch adds support for the uvtrace module by providing a
skeleton call to the registered trace function. It also
provides another separate 'NMI' tracer that is triggered by the
system wide 'power nmi' command.
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Reviewed-by: Hedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20130923212501.185052551@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current UV NMI handler has not been updated for the changes
in the system NMI handler and the perf operations. The UV NMI
handler reads an MMR in the UV Hub to check to see if the NMI
event was caused by the external 'system NMI' that the operator
can initiate on the System Mgmt Controller.
The problem arises when the perf tools are running, causing
millions of perf events per second on very large CPU count
systems. Previously this was okay because the perf NMI handler
ran at a higher priority on the NMI call chain and if the NMI
was a perf event, it would stop calling other NMI handlers
remaining on the NMI call chain.
Now the system NMI handler calls all the handlers on the NMI
call chain including the UV NMI handler. This causes the UV NMI
handler to read the MMRs at the same millions per second rate.
This can lead to significant performance loss and possible
system failures. It also can cause thousands of 'Dazed and
Confused' messages being sent to the system console. This
effectively makes perf tools unusable on UV systems.
To avoid this excessive overhead when perf tools are running,
this code has been optimized to minimize reading of the MMRs as
much as possible, by moving to the NMI_UNKNOWN notifier chain.
This chain is called only when all the users on the standard
NMI_LOCAL call chain have been called and none of them have
claimed this NMI.
There is an exception where the NMI_LOCAL notifier chain is
used. When the perf tools are in use, it's possible that the UV
NMI was captured by some other NMI handler and then either
ignored or mistakenly processed as a perf event. We set a
per_cpu ('ping') flag for those CPUs that ignored the initial
NMI, and then send them an IPI NMI signal. The NMI_LOCAL
handler on each cpu does not need to read the MMR, but instead
checks the in memory flag indicating it was pinged. There are
two module variables, 'ping_count' indicating how many requested
NMI events occurred, and 'ping_misses' indicating how many stray
NMI events. These most likely are perf events so it shows the
overhead of the perf NMI interrupts and how many MMR reads were avoided.
This patch also minimizes the reads of the MMRs by having the
first cpu entering the NMI handler on each node set a per HUB
in-memory atomic value. (Having a per HUB value avoids sending
lock traffic over NumaLink.) Both types of UV NMIs from the SMI
layer are supported.
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Reviewed-by: Hedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch moves the UV NMI support from the x2apic file to a
new separate uv_nmi.c file in preparation for the next sequence
of patches. It prevents upcoming bloat of the x2apic file, and
has the added benefit of putting the upcoming /sys/module
parameters under the name 'uv_nmi' instead of 'x2apic_uv_x',
which was obscure.
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Reviewed-by: Hedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20130923212500.183295611@asylum.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[Purpose of this patch]
As Vaibhav explained in the thread below, tracepoints for irq vectors
are useful.
http://www.spinics.net/lists/mm-commits/msg85707.html
<snip>
The current interrupt traces from irq_handler_entry and irq_handler_exit
provide when an interrupt is handled. They provide good data about when
the system has switched to kernel space and how it affects the currently
running processes.
There are some IRQ vectors which trigger the system into kernel space,
which are not handled in generic IRQ handlers. Tracing such events gives
us the information about IRQ interaction with other system events.
The trace also tells where the system is spending its time. We want to
know which cores are handling interrupts and how they are affecting other
processes in the system. Also, the trace provides information about when
the cores are idle and which interrupts are changing that state.
<snip>
On the other hand, my usecase is tracing just local timer event and
getting a value of instruction pointer.
I suggested to add an argument local timer event to get instruction pointer before.
But there is another way to get it with external module like systemtap.
So, I don't need to add any argument to irq vector tracepoints now.
[Patch Description]
Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events.
But there is an above use case to trace specific irq_vector rather than tracing all events.
In this case, we are concerned about overhead due to unwanted events.
So, add following tracepoints instead of introducing irq_vector_entry/exit.
so that we can enable them independently.
- local_timer_vector
- reschedule_vector
- call_function_vector
- call_function_single_vector
- irq_work_entry_vector
- error_apic_vector
- thermal_apic_vector
- threshold_apic_vector
- spurious_apic_vector
- x86_platform_ipi_vector
Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty
makes a zero when tracepoints are disabled. Detailed explanations are as follows.
- Create trace irq handlers with entering_irq()/exiting_irq().
- Create a new IDT, trace_idt_table, at boot time by adding a logic to
_set_gate(). It is just a copy of original idt table.
- Register the new handlers for tracpoints to the new IDT by introducing
macros to alloc_intr_gate() called at registering time of irq_vector handlers.
- Add checking, whether irq vector tracing is on/off, into load_current_idt().
This has to be done below debug checking for these reasons.
- Switching to debug IDT may be kicked while tracing is enabled.
- On the other hands, switching to trace IDT is kicked only when debugging
is disabled.
In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being
used for other purposes.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
This patch trims the MMR register definitions after the updates for the
SGI UV3 system have been applied. Note that because these definitions
are automatically generated from the RTL we cannot control the length
of the names. Therefore there are lines that exceed 80 characters.
Signed-off-by: Mike Travis <travis@sgi.com>
Link: http://lkml.kernel.org/r/20130211194509.173026880@gulag1.americas.sgi.com
Acked-by: Russ Anderson <rja@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch updates the UV HUB info for UV3. The "is_uv3_hub" and
"is_uvx_hub" (UV2 or UV3) functions are added as well as the addresses
and sizes of the MMR regions for UV3.
Signed-off-by: Mike Travis <travis@sgi.com>
Link: http://lkml.kernel.org/r/20130211194508.610723192@gulag1.americas.sgi.com
Acked-by: Russ Anderson <rja@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch updates the MMR register definitions for the SGI UV3 system.
Note that because these definitions are automatically generated from
the RTL we cannot control the length of the names. Therefore there are
lines that exceed 80 characters.
All the new MMR definitions are added in this patch. The patches that
follow then update the references. The last patch is a "trim" patch
which reduces the size of the MMR definitions file by about a third.
This keeps "bi-sectability" in place as the intermediate patches would
not compile correctly if the trimmed MMR defines were done first.
Signed-off-by: Mike Travis <travis@sgi.com>
Link: http://lkml.kernel.org/r/20130211194508.326204556@gulag1.americas.sgi.com
Acked-by: Russ Anderson <rja@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The flush tlb optimization code has logical issue on UV
platform. It doesn't flush the full range at all, since it
simply ignores its 'end' parameter (and hence also the "all"
indicator) in uv_flush_tlb_others() function.
Cliff's notes:
| I tested the patch on a UV. It has the effect of either
| clearing 1 or all TLBs in a cpu. I added some debugging to
| test for the cases when clearing all TLBs is overkill, and in
| practice it happens very seldom.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Tested-by: Cliff Wickman <cpw@sgi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86/mm changes from Peter Anvin:
"The big change here is the patchset by Alex Shi to use INVLPG to flush
only the affected pages when we only need to flush a small page range.
It also removes the special INVALIDATE_TLB_VECTOR interrupts (32
vectors!) and replace it with an ordinary IPI function call."
Fix up trivial conflicts in arch/x86/include/asm/apic.h (added code next
to changed line)
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tlb: Fix build warning and crash when building for !SMP
x86/tlb: do flush_tlb_kernel_range by 'invlpg'
x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR
x86/tlb: enable tlb flush range support for x86
mm/mmu_gather: enable tlb flush range in generic mmu_gather
x86/tlb: add tlb_flushall_shift knob into debugfs
x86/tlb: add tlb_flushall_shift for specific CPU
x86/tlb: fall back to flush all when meet a THP large page
x86/flush_tlb: try flush_tlb_single one by one in flush_tlb_range
x86/tlb_info: get last level TLB entry number of CPU
x86: Add read_mostly declaration/definition to variables from smp.h
x86: Define early read-mostly per-cpu macros
x86 has no flush_tlb_range support in instruction level. Currently the
flush_tlb_range just implemented by flushing all page table. That is not
the best solution for all scenarios. In fact, if we just use 'invlpg' to
flush few lines from TLB, we can get the performance gain from later
remain TLB lines accessing.
But the 'invlpg' instruction costs much of time. Its execution time can
compete with cr3 rewriting, and even a bit more on SNB CPU.
So, on a 512 4KB TLB entries CPU, the balance points is at:
(512 - X) * 100ns(assumed TLB refill cost) =
X(TLB flush entries) * 100ns(assumed invlpg cost)
Here, X is 256, that is 1/2 of 512 entries.
But with the mysterious CPU pre-fetcher and page miss handler Unit, the
assumed TLB refill cost is far lower then 100ns in sequential access. And
2 HT siblings in one core makes the memory access more faster if they are
accessing the same memory. So, in the patch, I just do the change when
the target entries is less than 1/16 of whole active tlb entries.
Actually, I have no data support for the percentage '1/16', so any
suggestions are welcomed.
As to hugetlb, guess due to smaller page table, and smaller active TLB
entries, I didn't see benefit via my benchmark, so no optimizing now.
My micro benchmark show in ideal scenarios, the performance improves 70
percent in reading. And in worst scenario, the reading/writing
performance is similar with unpatched 3.4-rc4 kernel.
Here is the reading data on my 2P * 4cores *HT NHM EP machine, with THP
'always':
multi thread testing, '-t' paramter is thread number:
with patch unpatched 3.4-rc4
./mprotect -t 1 14ns 24ns
./mprotect -t 2 13ns 22ns
./mprotect -t 4 12ns 19ns
./mprotect -t 8 14ns 16ns
./mprotect -t 16 28ns 26ns
./mprotect -t 32 54ns 51ns
./mprotect -t 128 200ns 199ns
Single process with sequencial flushing and memory accessing:
with patch unpatched 3.4-rc4
./mprotect 7ns 11ns
./mprotect -p 4096 -l 8 -n 10240
21ns 21ns
[ hpa: http://lkml.kernel.org/r/1B4B44D9196EFF41AE41FDA404FC0A100BFF94@SHSMSX101.ccr.corp.intel.com
has additional performance numbers. ]
Signed-off-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1340845344-27557-3-git-send-email-alex.shi@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
On SGI's UV2 the BAU (Broadcast Assist Unit) driver can hang
under a heavy load. To cure this:
- Disable the UV2 extended status mode (see UV2_EXT_SHFT), as
this mode changes BAU behavior in more ways then just delivering
an extra bit of status. Revert status to just two meaningful bits,
like UV1.
- Use no IPI-style resets on UV2. Just give up the request for
whatever the reason it failed and let it be accomplished with
the legacy IPI method.
- Use no alternate sending descriptor (the former UV2 workaround
bcp->using_desc and handle_uv2_busy() stuff). Just disable the
use of the BAU for a period of time in favor of the legacy IPI
method when the h/w bug leaves a descriptor busy.
-- new tunable: giveup_limit determines the threshold at which a hub is
so plugged that it should do all requests with the legacy IPI method for a
period of time
-- generalize disable_for_congestion() (renamed disable_for_period()) for
use whenever a hub should avoid using the BAU for a period of time
Also:
- Fix find_another_by_swack(), which is part of the UV2 bug workaround
- Correct and clarify the statistics (new stats s_overipilimit, s_giveuplimit,
s_enters, s_ipifordisabled, s_plugged, s_congested)
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Link: http://lkml.kernel.org/r/20120622131459.GC31884@sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch enables the BAU to be turned on or off dynamically.
echo "on" > /proc/sgi_uv/ptc_statistics
echo "off" > /proc/sgi_uv/ptc_statistics
The system may be booted with or without the nobau option.
Whether the system currently has the BAU off can be seen in
the /proc file -- normally with the baustats script.
Each cpu will have a 1 in the bauoff field if the BAU was turned
off, so baustats will give a count of cpus that have it off.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Link: http://lkml.kernel.org/r/20120622131330.GB31884@sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The SGI Altix UV2 BAU (Broadcast Assist Unit) as used for
tlb-shootdown (selective broadcast mode) always uses UV2
broadcast descriptor format. There is no need to clear the
'legacy' (UV1) mode, because the hardware always uses UV2 mode
for selective broadcast.
But the BIOS uses general broadcast and legacy mode, and the
hardware pays attention to the legacy mode bit for general
broadcast. So the kernel must not clear that mode bit.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/E1SccoO-0002Lh-Cb@eag09.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
uv_gpa_to_soc_phys_ram() was inadvertently ignoring the
shift values. This fix takes the shift into account.
Signed-off-by: Russ Anderson <rja@sgi.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20120119020753.GA7228@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds separate accounting of UV2 message "strong
nack's" in the BAU statistics.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Link: http://lkml.kernel.org/r/20120116212238.GF5767@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch implements a workaround for a UV2 hardware bug.
The bug is a non-atomic update of a memory-mapped register. When
hardware message delivery and software message acknowledge occur
simultaneously the pending message acknowledge for the arriving
message may be lost. This causes the sender's message status to
stay busy.
Part of the workaround is to not acknowledge a completed message
until it is verified that no other message is actually using the
resource that is mistakenly recorded in the completed message.
Part of the workaround is to test for long elapsed time in such
a busy condition, then handle it by using a spare sending
descriptor. The stay-busy condition is eventually timed out by
hardware, and then the original sending descriptor can be
re-used. Most of that logic change is in keeping track of the
current descriptor and the state of the spares.
The occurrences of the workaround are added to the BAU
statistics.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Link: http://lkml.kernel.org/r/20120116211947.GC5767@sgi.com
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Update the use of the Broadcast Assist Unit on SGI Altix UV2 to
the use of native UV2 mode on new hardware (not the legacy mode).
UV2 native mode has a different format for a broadcast message.
We also need quick differentiaton between UV1 and UV2.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Link: http://lkml.kernel.org/r/20120116211750.GA5767@sgi.com
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There was a mixup when the SGI UV2 hub chip was sent to be
fabricated, and it ended up with the wrong part number in the
HRP_NODE_ID mmr. Future versions of the chip will (may) have the
correct part number. Change the UV infrastructure to recognize
both part numbers as valid IDs of a UV2 hub chip.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/20111129210058.GA20452@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This is a workaround for a UV2 hub bug that affects the format of system
global addresses.
The GRU API for UV2 was inadvertently broken by a hardware change. The
format of the physical address used for TLB dropins and for addresses used
with instructions running in unmapped mode has changed. This change was
not documented and became apparent only when diags failed running on
system simulators.
For UV1, TLB and GRU instruction physical addresses are identical to
socket physical addresses (although high NASID bits must be OR'ed into the
address).
For UV2, socket physical addresses need to be converted. The NODE portion
of the physical address needs to be shifted so that the low bit is in bit
39 or bit 40, depending on an MMR value.
It is not yet clear if this bug will be fixed in a silicon respin. If it
is fixed, the hub revision will be incremented & the workaround disabled.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This covers the trivial cases from open-coded xadd to the xadd macros.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Link: http://lkml.kernel.org/r/4E5BCC40.3030501@goop.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Correct the UV2 broacast assist unit's destination timeout
period. And the activation status register in UV2 should be
tested for a destination timeout with a 4, not a 2. The values
for Active versus Timeout were reversed.
This patch is critical for TLB shootdown on an Altix UV2 system
(i.e. the follow-on to the current Altix UV).
Destination timeout period:
The period is set in 4 bits of memory-mapped register MISC_CONTROL.
The left bit toggles base period between 10us and 80us.
The other 3 bits are the multiplier.
Decimal 15, hex f, gives the maximum: 7 * 80us
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Link: http://lkml.kernel.org/r/20110621122243.117324443@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the large stack-resident cpumask_t from
reset_with_ipi()'s stack by allocating one per uvhub.
Due to the limited size of the stack the potentially huge cpumask_t may
cause stack overrun. We haven't seen it happen yet, but we need to make it
a practice not to push such structures onto the stack.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20110621122242.832589130@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rename 'bau_targ_hubmask' to 'pnmask' for clarity.
The BAU distribution bit mask is indexed by pnode number, not hub or
blade number. This important fact is not clear while the mask is
called a 'hubmask'.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Link: http://lkml.kernel.org/r/20110621122242.630995969@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make all the functions in uv_bau.h inline so that it can
be included in the fake prom (used in simulations).
If not inlined the unused functions will generate compiler warnings.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/20110621122242.230529678@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
No code changes. Reformat definitions to make it more readable.
I fixed alignment of comments in the structure definitions.
Also aligned comments and most field definitions & values. Also
sorted the defines for the SHIFT & MASK values for each MMR.
This make the file visually much more acceptable.
Some of the symbol names are still quite long. The file is based
on post-processing of verilog definitions that are used for the
node controller chip design. Although some symbol names are not
what I would chose, I would like to maintain compatibility with
the names used by the chip designers. We have a number of
cross-reference utilities & having common names is important.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/20110527145256.GA31224@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--
arch/x86/include/asm/uv/uv_mmrs.h | 2873 +++++++++++++++++++++-----------------
1 file changed, 1600 insertions(+), 1273 deletions(-)
Dimitri Sivanich