Commit Graph

61 Commits

Author SHA1 Message Date
Geliang Tang 729dee30dd [media] wl128x: use setup_timer
Use setup_timer() instead of init_timer() to simplify the code.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10 14:56:37 -03:00
Sakari Ailus bcb63314e2 [media] media: Drop FSF's postal address from the source code files
Drop the FSF's postal address from the source code files that typically
contain mostly the license text. Of the 628 removed instances, 578 are
outdated.

The patch has been created with the following command without manual edits:

git grep -l "675 Mass Ave\|59 Temple Place\|51 Franklin St" -- \
	drivers/media/ include/media|while read i; do i=$i perl -e '
open(F,"< $ENV{i}");
$a=join("", <F>);
$a =~ s/[ \t]*\*\n.*You should.*\n.*along with.*\n.*(\n.*USA.*$)?\n//m
	&& $a =~ s/(^.*)Or, (point your browser to) /$1To obtain the license, $2\n$1/m;
close(F);
open(F, "> $ENV{i}");
print F $a;
close(F);'; done

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2017-01-27 11:38:09 -02:00
Mauro Carvalho Chehab ac2ac8376e [media] wl128x: use KERNEL_CONT where needed
Some continuation messages are not using KERNEL_CONT.

Since commit 563873318d ("Merge branch 'printk-cleanups"),
this won't work as expected anymore. So, let's add KERN_CONT
to those lines.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-18 09:37:24 -02:00
Mauro Carvalho Chehab e84541f0fb [media] wl128x: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.

As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.

So, join those continuation lines.

The patch was generated via the script below, and manually
adjusted if needed.

</script>
use Text::Tabs;
while (<>) {
	if ($next ne "") {
		$c=$_;
		if ($c =~ /^\s+\"(.*)/) {
			$c2=$1;
			$next =~ s/\"\n$//;
			$n = expand($next);
			$funpos = index($n, '(');
			$pos = index($c2, '",');
			if ($funpos && $pos > 0) {
				$s1 = substr $c2, 0, $pos + 2;
				$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
				$s2 =~ s/^\s+//;

				$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");

				print unexpand("$next$s1\n");
				print unexpand("$s2\n") if ($s2 ne "");
			} else {
				print "$next$c2\n";
			}
			$next="";
			next;
		} else {
			print $next;
		}
		$next="";
	} else {
		if (m/\"$/) {
			if (!m/\\n\"$/) {
				$next=$_;
				next;
			}
		}
	}
	print $_;
}
</script>

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 09:37:45 -02:00
Geert Uytterhoeven 4360fa22ad drivers: misc: ti-st: Use int instead of fuzzy char for callback status
On mips and parisc:

    drivers/bluetooth/btwilink.c: In function 'ti_st_open':
    drivers/bluetooth/btwilink.c:174:21: warning: overflow in implicit constant conversion [-Woverflow]
       hst->reg_status = -EINPROGRESS;

    drivers/nfc/nfcwilink.c: In function 'nfcwilink_open':
    drivers/nfc/nfcwilink.c:396:31: warning: overflow in implicit constant conversion [-Woverflow]
      drv->st_register_cb_status = -EINPROGRESS;

There are actually two issues:
  1. Whether "char" is signed or unsigned depends on the architecture.
     As the completion callback data is used to pass a (negative) error
     code, it should always be signed.
  2. EINPROGRESS is 150 on mips, 245 on parisc.
     Hence -EINPROGRESS doesn't fit in a signed 8-bit number.

Change the callback status from "char" to "int" to fix these.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-17 19:59:26 +02:00
Dan Carpenter aeae69daa3 [media] wl128x: fix typo in MODULE_PARM_DESC
The module_param() is "default_rds_buf" and the MODULE_PARM_DESC()
should match.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01 08:00:27 -02:00
Fabian Frederick 453f847ef2 [media] wl128x: use swap() in fm_rdsparse_swapbytes()
Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-06 08:25:48 -03:00
Geert Uytterhoeven c579401a24 [media] wl128x: Allow compile test of GPIO consumers if !GPIOLIB
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30 11:45:40 -03:00
Mauro Carvalho Chehab d202e1bab3 [media] wl128x: fix int type for streg_cbdata
The streg_cbdata can have a negative error value. So, it should be
an integer, and not u8, as reported by smatch:
	drivers/media/radio/wl128x/fmdrv_common.c:1517 fmc_prepare() warn: assigning (-115) to unsigned variable 'fmdev->streg_cbdata'

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-30 13:40:05 -03:00
Hans Verkuil cab9bf11f8 [media] wl128x: embed video_device
Embed the video_device struct to simplify the error handling and in
order to (eventually) get rid of video_device_alloc/release.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-02 23:35:52 -03:00
Arnd Bergmann 78e9b7de78 [media] wl128x-radio really depends on TI_ST
All other drivers using the TI_ST infrastructure use
'depends on' for this symbol, and it makes no sense
to only enable that if CONFIG_NET is enable, because
the radio driver also depends on CONFIG_NET itself:

ERROR: "skb_queue_purge" [drivers/media/radio/wl128x/fm_drv.ko] undefined!
ERROR: "skb_push" [drivers/media/radio/wl128x/fm_drv.ko] undefined!
ERROR: "skb_pull" [drivers/media/radio/wl128x/fm_drv.ko] undefined!

Making the driver dependency explicit solves randconfig
build problems and makes it more obvious to the reader.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-02 18:23:28 -03:00
Rickard Strandqvist 58fc0461f6 [media] media: radio: wl128x: fmdrv_rx.c: Remove unused function
Remove the function fm_rx_get_rds_system() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-27 09:56:20 -02:00
Hans Verkuil 7027c448d2 [media] media/radio: fix querycap
Querycap should set the device_caps field.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-02 11:30:55 -02:00
Hans Verkuil 1a5cfd0227 [media] wl128x: fix fmdbg compiler warning
fmdrv_common.c: In function 'fm_download_firmware':
fmdrv_common.c:1259:2: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' [-Wformat=]
   fmdbg("Firmware(%s) length : %d bytes\n", fw_name, fw_entry->size);
   ^

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-24 09:27:34 -02:00
Hans Verkuil 2a8b7e5888 [media] wl128x: fix sparse warnings
drivers/media/radio/wl128x/fmdrv_common.c:598:32: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:598:32: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:598:32: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:598:32: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:767:38: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:767:38: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:767:38: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:767:38: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:992:21: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:992:21: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:992:21: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:992:21: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:443:41: warning: incorrect type in assignment (different base types)
drivers/media/radio/wl128x/fmdrv_common.c:1359:17: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:1359:17: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:1359:17: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:1359:17: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:1359:39: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:1359:39: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:1359:39: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:1359:39: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:1368:25: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:1368:25: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:1368:25: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:1368:25: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:1368:47: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:1368:47: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:1368:47: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_common.c:1368:47: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:119:20: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:119:20: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:119:20: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:119:20: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:192:20: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:192:20: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:192:20: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:192:20: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:288:28: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:288:28: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:288:28: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:288:28: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:534:20: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:534:20: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:534:20: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:534:20: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:625:17: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:625:17: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:625:17: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_rx.c:625:17: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_tx.c:377:20: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_tx.c:377:20: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_tx.c:377:20: warning: cast to restricted __be16
drivers/media/radio/wl128x/fmdrv_tx.c:377:20: warning: cast to restricted __be16

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 09:39:15 -03:00
Hans Verkuil 883cdd5e3b [media] fmdrv_common: fix sparse warning
drivers/media/radio/wl128x/fmdrv_common.c:178:6: warning: symbol 'g_st_write' was not declared. Should it be static?

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-15 12:59:16 -03:00
Hans Verkuil ae09e9e73a [media] wl128x: add missing struct v4l2_device
This struct is now required for all video device nodes, but it was missing
in this driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28 15:09:10 -03:00
Alexey Khoroshilov 5255e4d9df [media] wl128x: do not call copy_to_user() while holding spinlocks
copy_to_user() must not be called with spinlocks held, but it is in
fmc_transfer_rds_from_internal_buff().
The patch copies data to tmpbuf, releases spinlock and then passes it to userspace.
By the way there is a small unification: replace a couple of hardcoded constants by a macro.
Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21 08:23:31 -03:00
Hans Verkuil 2f73c7c582 [media] v4l2: add const to argument of write-only s_tuner ioctl
This ioctl is defined as IOW, so pass the argument as const.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24 06:31:23 -03:00
Hans Verkuil b530a447bb [media] v4l2: add const to argument of write-only s_frequency ioctl
This ioctl is defined as IOW, so pass the argument as const.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24 06:25:34 -03:00
Linus Torvalds 21fbd5809a Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:

 - Some cleanups at V4L2 documentation

 - new drivers: ts2020 frontend, ov9650 sensor, s5c73m3 sensor,
   sh-mobile veu mem2mem driver, radio-ma901, davinci_vpfe staging
   driver

 - Lots of missing MAINTAINERS entries added

 - several em28xx driver improvements, including its conversion to
   videobuf2

 - several fixups on drivers to make them to better comply with the API

 - DVB core: add support for DVBv5 stats, allowing the implementation of
   statistics for new standards like ISDB

 - mb86a20s: add statistics to the driver

 - lots of new board additions, cleanups, and driver improvements.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (596 commits)
  [media] media: Add 0x3009 USB PID to ttusb2 driver (fixed diff)
  [media] rtl28xxu: Add USB IDs for Compro VideoMate U620F
  [media] em28xx: add usb id for terratec h5 rev. 3
  [media] media: rc: gpio-ir-recv: add support for device tree parsing
  [media] mceusb: move check earlier to make smatch happy
  [media] radio-si470x doc: add info about v4l2-ctl and sox+alsa
  [media] staging: media: Remove unnecessary OOM messages
  [media] sh_vou: Use vou_dev instead of vou_file wherever possible
  [media] sh_vou: Use video_drvdata()
  [media] drivers/media/platform/soc_camera/pxa_camera.c: use devm_ functions
  [media] mt9t112: mt9t111 format set up differs from mt9t112
  [media] sh-mobile-ceu-camera: fix SHARPNESS control default
  Revert "[media] fc0011: Return early, if the frequency is already tuned"
  [media] cx18/ivtv: fix regression: remove __init from a non-init function
  [media] em28xx: fix analog streaming with USB bulk transfers
  [media] stv0900: remove unnecessary null pointer check
  [media] fc0011: Return early, if the frequency is already tuned
  [media] fc0011: Add some sanity checks and cleanups
  [media] fc0011: Fix xin value clamping
  Revert "[media] [PATH,1/2] mxl5007 move reset to attach"
  ...
2013-02-24 17:35:10 -08:00
Linus Torvalds 21eaab6d19 tty/serial patches for 3.9-rc1
Here's the big tty/serial driver patches for 3.9-rc1.
 
 More tty port rework and fixes from Jiri here, as well as lots of
 individual serial driver updates and fixes.
 
 All of these have been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmZYQACgkQMUfUDdst+ylJDgCg0B0nMevUUdM4hLvxunbbiyXM
 HUEAoIOedqriNNPvX4Bwy0hjeOEaWx0g
 =vi6x
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial patches from Greg Kroah-Hartman:
 "Here's the big tty/serial driver patches for 3.9-rc1.

  More tty port rework and fixes from Jiri here, as well as lots of
  individual serial driver updates and fixes.

  All of these have been in the linux-next tree for a while."

* tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits)
  tty: mxser: improve error handling in mxser_probe() and mxser_module_init()
  serial: imx: fix uninitialized variable warning
  serial: tegra: assume CONFIG_OF
  TTY: do not update atime/mtime on read/write
  lguest: select CONFIG_TTY to build properly.
  ARM defconfigs: add missing inclusions of linux/platform_device.h
  fb/exynos: include platform_device.h
  ARM: sa1100/assabet: include platform_device.h directly
  serial: imx: Fix recursive locking bug
  pps: Fix build breakage from decoupling pps from tty
  tty: Remove ancient hardpps()
  pps: Additional cleanups in uart_handle_dcd_change
  pps: Move timestamp read into PPS code proper
  pps: Don't crash the machine when exiting will do
  pps: Fix a use-after free bug when unregistering a source.
  pps: Use pps_lookup_dev to reduce ldisc coupling
  pps: Add pps_lookup_dev() function
  tty: serial: uartlite: Support uartlite on big and little endian systems
  tty: serial: uartlite: Fix sparse and checkpatch warnings
  serial/arc-uart: Miscll DT related updates (Grant's review comments)
  ...

Fix up trivial conflicts, mostly just due to the TTY config option
clashing with the EXPERIMENTAL removal.
2013-02-21 13:41:04 -08:00
Hans Verkuil ce4a3d5288 [media] radio: set vfl_dir correctly to fix modulator regression
The vfl_dir field should be set to indicate whether a device can receive
data, output data or can do both. This is used to let the v4l core know
which ioctls should be accepted and which can be refused.
Unfortunately, when this field was added the radio modulator drivers were
not updated: radio modulators transmit and so vfl_dir should be set to
VFL_DIR_TX (or VFL_DIR_M2M in the special case of wl128x).
Because of this omission it is not possible to call g/s_modulator for these
drivers, which effectively renders them useless.
This patch sets the correct vfl_dir value for these drivers, correcting
this bug.
Thanks to Paul Grinberg for bringing this to my attention.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-24 18:54:14 -02:00
Joe Millenbach 4f73bc4dd3 tty: Added a CONFIG_TTY option to allow removal of TTY
The option allows you to remove TTY and compile without errors. This
saves space on systems that won't support TTY interfaces anyway.
bloat-o-meter output is below.

The bulk of this patch consists of Kconfig changes adding "depends on
TTY" to various serial devices and similar drivers that require the TTY
layer.  Ideally, these dependencies would occur on a common intermediate
symbol such as SERIO, but most drivers "select SERIO" rather than
"depends on SERIO", and "select" does not respect dependencies.

bloat-o-meter output comparing our previous minimal to new minimal by
removing TTY.  The list is filtered to not show removed entries with awk
'$3 != "-"' as the list was very long.

add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350)
function                                     old     new   delta
chr_dev_init                                 166     170      +4
allow_signal                                  80      82      +2
static.__warned                              143     142      -1
disallow_signal                               63      62      -1
__set_special_pids                            95      94      -1
unregister_console                           126     121      -5
start_kernel                                 546     541      -5
register_console                             593     588      -5
copy_from_user                                45      40      -5
sys_setsid                                   128     120      -8
sys_vhangup                                   32      19     -13
do_exit                                     1543    1526     -17
bitmap_zero                                   60      40     -20
arch_local_irq_save                          137     117     -20
release_task                                 674     652     -22
static.spin_unlock_irqrestore                308     260     -48

Signed-off-by: Joe Millenbach <jmillenbach@gmail.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18 16:15:27 -08:00
Ezequiel Garcia c84401c200 [media] wl128x: Replace memcpy with struct assignment
This kind of memcpy() is error-prone. Its replacement with a struct
assignment is prefered because it's type-safe and much easier to read.
Found by coccinelle. Hand patched and reviewed.
Tested by compilation only.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier struct_name;
struct struct_name to;
struct struct_name from;
expression E;
@@
-memcpy(&(to), &(from), E);
+to = from;
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-27 19:03:46 -02:00
Mauro Carvalho Chehab 5a3ef81074 [media] fmdrv: Don't check if unsigned are below zero
drivers/media/radio/wl128x/fmdrv_common.c:745:3: warning: comparison is always false due to limited range of data type [-Wtype-limits]
drivers/media/radio/wl128x/fmdrv_rx.c:308:2: warning: comparison is always false due to limited range of data type [-Wtype-limits]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-28 07:39:04 -02:00
Mauro Carvalho Chehab 7226d8ebdd [media] fmdrv: better define fmdbg() macro to avoid warnings
drivers/media/radio/wl128x/fmdrv_common.c:1619:47: warning: suggest braces around empty body in an 'else' statement [-Wempty-body]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-28 07:38:52 -02:00
Hans Verkuil 617ade61ea [media] radio drivers: in non-blocking mode return EAGAIN in hwseek
VIDIOC_S_HW_FREQ_SEEK should return EAGAIN when called in non-blocking
mode. This might change in the future if we add support for this in the
future, but right now this is not supported.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26 17:51:41 -03:00
Hans Verkuil 3f70e1f598 [media] v4l2: make vidioc_s_modulator const
Write-only ioctls should have a const argument in the ioctl op.
Do this conversion for vidioc_s_modulator.
Adding const for write-only ioctls was decided during the 2012 Media Workshop.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26 10:58:02 -03:00
Hans Verkuil 0e8025b9f6 [media] v4l2: make vidioc_s_audio const
Write-only ioctls should have a const argument in the ioctl op.
Do this conversion for vidioc_s_audio.
Adding const for write-only ioctls was decided during the 2012 Media Workshop.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26 10:50:12 -03:00
Hans Verkuil ec6f432810 [media] v4l2: make vidioc_s_freq_hw_seek const
Write-only ioctls should have a const argument in the ioctl op.
Do this conversion for vidioc_s_freq_hw_seek.
Adding const for write-only ioctls was decided during the 2012 Media Workshop.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26 10:47:28 -03:00
Hans Verkuil a2e10b5aee [media] wl128x: remove V4L2_FL_LOCK_ALL_FOPS
Add proper locking to the file operations, allowing for the removal
of the V4L2_FL_LOCK_ALL_FOPS flag.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-09 19:48:32 -03:00
Hans Verkuil 54f6019b58 [media] S_HW_FREQ_SEEK: set capability flags and return ENODATA instead of EAGAIN
Set the new capability flags in G_TUNER and return ENODATA if no channels
were found.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18 20:52:51 -03:00
Hans Verkuil 5126f2590b [media] v4l2-dev: add flag to have the core lock all file operations
This used to be the default if the lock pointer was set, but now that lock is by
default only used for ioctl serialization. Those drivers that already used
core locking have this flag set explicitly, except for some drivers where
it was obvious that there was no need to serialize any file operations other
than ioctl.

The drivers that didn't need this flag were:

drivers/media/radio/dsbr100.c
drivers/media/radio/radio-isa.c
drivers/media/radio/radio-keene.c
drivers/media/radio/radio-miropcm20.c
drivers/media/radio/radio-mr800.c
drivers/media/radio/radio-tea5764.c
drivers/media/radio/radio-timb.c
drivers/media/video/vivi.c
sound/i2c/other/tea575x-tuner.c

The other drivers that use core locking and where it was not immediately
obvious that this flag wasn't needed were changed so that the flag is set
together with a comment that that driver needs work to avoid having to
set that flag. This will often involve taking the core lock in the fops
themselves.

Eventually this flag should go and it should not be used in new drivers.

There are a few reasons why we want to avoid core locking of non-ioctl
fops: in the case of mmap this can lead to a deadlock in rare situations
since when mmap is called the mmap_sem is held and it is possible for
other parts of the code to take that lock as well (copy_from_user()/copy_to_user()
perform a down_read(&mm->mmap_sem) when a page fault occurs).

It is very unlikely that that happens since the core lock serializes all
fops, but the kernel warns about it if lock validation is turned on.

For poll it is also undesirable to take the core lock as that can introduce
increased latency. The same is true for read/write.

While it was possible to make flags or something to turn on/off taking the
core lock for each file operation, in practice it is much simpler to just
not take it at all except for ioctl and leave it to the driver to take the
lock. There are only a handful fops compared to the zillion ioctls we have.

I also wanted to make it obvious which drivers still take the lock for all
fops, so that's why I chose to have drivers set it explicitly.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14 09:19:38 -03:00
Randy Dunlap 2e2ba5d1e2 [media] wl128x: fix build errors when GPIOLIB is not enabled
From: Randy Dunlap <rdunlap@xenotime.net>

Fix wl128x Kconfig to depend on GPIOLIB since TI_ST also
depends on GPIOLIB.

(.text+0xe6d60): undefined reference to `st_register'
(.text+0xe7016): undefined reference to `st_unregister'
(.text+0xe70ce): undefined reference to `st_unregister'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Manjunatha Halli <manjunatha_halli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-15 12:04:45 -02:00
Fabio Estevam 0abffb9442 [media] drivers: media: radio: Fix dependencies for RADIO_WL128X
Fix the following build warning:

warning: (RADIO_WL128X) selects TI_ST which has unmet direct dependencies (MISC_DEVICES && NET && GPIOLIB)

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-06 13:17:50 -02:00
Xi Wang 8cc20dd89c [media] wl128x: fmdrv_tx: fix signedness bugs
Message-Id: <1322820073-19347-4-git-send-email-xi.wang@gmail.com>

The error handling with (ret < 0) didn't work where ret is a u32.
Use int instead.  To be consistent we also change the functions to
return an int.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-30 17:01:52 -02:00
Xi Wang d24674c60b [media] wl128x: fmdrv_rx: fix signedness bugs
Message-Id: <1322820073-19347-3-git-send-email-xi.wang@gmail.com>

The error handling with (ret < 0) didn't work where ret is a u32.
Use int instead.  To be consistent we also change the functions to
return an int.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-30 17:01:38 -02:00
Xi Wang a61278037b [media] wl128x: fmdrv_common: fix signedness bugs
Message-Id: <1322820073-19347-2-git-send-email-xi.wang@gmail.com>

The error handling with (ret < 0) didn't work where ret is a u32.
Use int instead.  To be consistent we also change the functions to
return an int.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-30 17:00:56 -02:00
Dan Carpenter 75c1ca364d [media] radio: NUL terminate a user string
We pass this to fm_tx_set_radio_text() which expects a NUL terminated
string.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-25 15:46:59 -02:00
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Paul Gortmaker 35a246363e drivers/media: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required
These two macros were in module.h but now module.h is no longer
sprayed across every source file imaginable, so the users need
to expicitly call out their use of them.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:51 -04:00
Linus Torvalds 1eb6337835 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (348 commits)
  [media] pctv452e: Remove bogus code
  [media] adv7175: Make use of media bus pixel codes
  [media] media: vb2: fix incorrect return value
  [media] em28xx: implement VIDIOC_ENUM_FRAMESIZES
  [media] cx23885: Stop the risc video fifo before reconfiguring it
  [media] cx23885: Avoid incorrect error handling and reporting
  [media] cx23885: Avoid stopping the risc engine during buffer timeout
  [media] cx23885: Removed a spurious function cx23885_set_scale()
  [media] cx23885: v4l2 api compliance, set the audioset field correctly
  [media] cx23885: hook the audio selection functions into the main driver
  [media] cx23885: add generic functions for dealing with audio input selection
  [media] cx23885: fixes related to maximum number of inputs and range checking
  [media] cx23885: Initial support for the MPX-885 mini-card
  [media] cx25840: Ensure AUDIO6 and AUDIO7 trigger line-in baseband use
  [media] cx23885: Enable audio line in support from the back panel
  [media] cx23885: Allow the audio mux config to be specified on a per input basis
  [media] cx25840: Enable support for non-tuner LR1/LR2 audio inputs
  [media] cx23885: Name an internal i2c part and declare a bitfield by name
  [media] cx23885: Ensure VBI buffers timeout quickly - bugfix for vbi hangs during streaming
  [media] cx23885: remove channel dump diagnostics when a vbi buffer times out
  ...

Fix up trivial conflicts in drivers/misc/altera-stapl/altera.c (header
file rename vs add)
2011-10-31 15:42:54 -07:00
Hans Verkuil 88365105d6 [media] v4l2-ctrls: replace is_volatile with V4L2_CTRL_FLAG_VOLATILE
With the new flag there is no need anymore to have a separate is_volatile
field. Modify all users to use the new flag.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-21 09:52:21 -03:00
Jiri Kosina e060c38434 Merge branch 'master' into for-next
Fast-forward merge with Linus to be able to merge patches
based on more recent version of the tree.
2011-09-15 15:08:18 +02:00
Justin P. Mattock 699324871f treewide: remove extra semicolons from various parts of the kernel
This is a resend from the original, changing the title from PATCH to
RFC(since this is a review for commit, and I should have put that the first go around).
and also removing some of the commit's with ia64 and bash since it is significant.
let me know if I might have missed anything etc..

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-15 14:50:49 +02:00
Hans Verkuil eb70ac1b1e [media] wl128x: fix compiler warning + wrong write() return
The fix is to check for ret and return -EFAULT if non-zero.

I also noticed that write() didn't return the number of bytes written.
Fixed as well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-06 14:39:10 -03:00
Hans Verkuil ddac5c1079 [media] v4l2-ctrls: fix and improve volatile control handling
If you have a cluster of controls that is a mix of volatile and non-volatile
controls, then requesting the value of the volatile control would fail if the
master control of that cluster was non-volatile. The code assumed that the
volatile state of the master control was the same for all other controls in
the cluster.

This is now fixed.

In addition, it was clear from bugs in some drivers that it was confusing that
the ctrl->cur union had to be used in g_volatile_ctrl. Several drivers used the
'new' values instead. The framework was changed so that drivers now set the new
value instead of the current value.

This has an additional benefit as well: the volatile values are now only stored
in the 'new' value, leaving the current value alone. This is useful for
autofoo/foo control clusters where you want to have a 'foo' control act like a
volatile control if 'autofoo' is on, but as a normal control when it is off.

Since with this change the cur value is no longer overwritten when g_volatile_ctrl
is called, you can use it to remember the original 'foo' value. For example:

autofoo = 0, foo = 10 and foo is non-volatile.

Now autofoo is set to 1 and foo is marked volatile. Retrieving the foo value
will get the volatile value. Set autofoo back to 0, which marks foo as non-
volatile again, and retrieving foo will get the old current value of 10.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:17 -03:00
Mauro Carvalho Chehab 29834c1ac7 [media] radio: Use the subsystem version control for VIDIOC_QUERYCAP
Just like the video drivers, the right thing to do is to use
the per-subsystem version control.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:16 -03:00
Hans Verkuil c6ae804a65 [media] wl12xx: g_volatile_ctrl fix: wrong field set
The function g_volatile_ctrl should change the current value rather than the
new value. These two drivers didn't do that, so the value is never reported
correctly.

In the future this will change since this behavior is clearly unexpected,
but for now fix these drivers first.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-25 07:51:48 -03:00