Commit Graph

15 Commits

Author SHA1 Message Date
Bart Van Assche 3cb5f3aeaf scsi: qla2xxx: Modify NVMe include directives
Since struct sg_table is used in nvme-fc-driver.h, include
<linux/scatterlist.h> from that header file.

Since no definitions or declarations from <linux/blk-mq.h> are used in the
qla_nvme.h header file, do not include <linux/blk-mq.h> from that header
file.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12 21:34:08 -04:00
Bart Van Assche 6c18a43e3c scsi: qla2xxx: Enable type checking for the SRB free and done callback functions
Since all pointers passed to the srb_t.done() and srb_t.free() functions
have type srb_t, change the type of the first argument of these functions
from void * into struct srb *. This allows the compiler to verify the
argument types for these functions. This patch does not change any
functionality.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12 21:34:08 -04:00
Bart Van Assche df95f39ae7 scsi: qla2xxx: Introduce the be_id_t and le_id_t data types for FC src/dst IDs
Introduce the be_id_t and le_id_t data types for Fibre Channel source and
destination ID formats supported by the firmware instead of using an
uint8_t[3] array. Introduce functions for converting from and to the
port_id_t data types. This patch does not change the behavior of the
qla2xxx driver but improves source code readability and also allows the
compiler to verify the endianness of Fibre Channel IDs.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12 21:34:07 -04:00
Quinn Tran 4c2a2d0178 scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition
This patch uses kref to protect access between fcp_abort path and nvme
command and LS command completion path.  Stack trace below shows the abort
path is accessing stale memory (nvme_private->sp).

When command kref reaches 0, nvme_private & srb resource will be
disconnected from each other.  Any subsequence nvme abort request will not
be able to reference the original srb.

[ 5631.003998] BUG: unable to handle kernel paging request at 00000010000005d8
[ 5631.004016] IP: [<ffffffffc087df92>] qla_nvme_abort_work+0x22/0x100 [qla2xxx]
[ 5631.004086] Workqueue: events qla_nvme_abort_work [qla2xxx]
[ 5631.004097] RIP: 0010:[<ffffffffc087df92>]  [<ffffffffc087df92>] qla_nvme_abort_work+0x22/0x100 [qla2xxx]
[ 5631.004109] Call Trace:
[ 5631.004115]  [<ffffffffaa4b8174>] ? pwq_dec_nr_in_flight+0x64/0xb0
[ 5631.004117]  [<ffffffffaa4b9d4f>] process_one_work+0x17f/0x440
[ 5631.004120]  [<ffffffffaa4bade6>] worker_thread+0x126/0x3c0

Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27 00:09:18 -04:00
Arun Easi 6a81533d61 scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices
BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffffc050d10c>] qla_nvme_unregister_remote_port+0x6c/0xf0 [qla2xxx]
PGD 800000084cf41067 PUD 84d288067 PMD 0
Oops: 0000 [#1] SMP
Call Trace:
 [<ffffffff98abcfdf>] process_one_work+0x17f/0x440
 [<ffffffff98abdca6>] worker_thread+0x126/0x3c0
 [<ffffffff98abdb80>] ? manage_workers.isra.26+0x2a0/0x2a0
 [<ffffffff98ac4f81>] kthread+0xd1/0xe0
 [<ffffffff98ac4eb0>] ? insert_kthread_work+0x40/0x40
 [<ffffffff9918ad37>] ret_from_fork_nospec_begin+0x21/0x21
 [<ffffffff98ac4eb0>] ? insert_kthread_work+0x40/0x40
RIP  [<ffffffffc050d10c>] qla_nvme_unregister_remote_port+0x6c/0xf0 [qla2xxx]

The crash is due to a bad entry in the nvme_rport_list. This list is not
protected, and when a remoteport_delete callback is called, driver
traverses the list and crashes.

Actually, the list could be removed and driver could traverse the main
fcport list instead. Fix does exactly that.

Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27 00:09:18 -04:00
Bart Van Assche d4556a4932 scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses to firmware
This patch makes the code easier to read and more compact.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29 17:24:51 -04:00
Bart Van Assche 15b7a68c1d scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures
Introduce two structures for the (DMA address, length) combination instead
of using separate structure members for the DMA address and length. This
patch fixes several Coverity complaints about 'cur_dsd' being used to write
outside the bounds of structure members.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29 17:24:51 -04:00
Bart Van Assche 219d27d714 scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands
In the *_done() functions, instead of returning early if sp->ref_count >=
2, only decrement sp->ref_count. In qla2xxx_eh_abort(), instead of deciding
what to do based on the value of sp->ref_count, decide which action to take
depending on the completion status of the firmware abort. Remove srb.cwaitq
and use srb.comp instead. In qla2x00_abort_srb(), call
isp_ops->abort_command() directly instead of calling qla2xxx_eh_abort().

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29 17:24:51 -04:00
Darren Trapp 03aaa89fe4 scsi: qla2xxx: Add First Burst support for FC-NVMe devices
Add Support for First Burst for FC-NVMe protocol. This feature requires
First Burst support in the firmware.

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-19 18:58:35 -05:00
Quinn Tran 8777e4314d scsi: qla2xxx: Migrate NVME N2N handling into state machine
This patch fixes regression introduced for the N2N support for FC-NVMe. For
FC-NVMe with N2N connection, instead of FW initiating the Login, Driver
starts Login process.  This patch migrates that new process from a
standalone path into existing session management state machine. With this
state change now driver will not wait for pull NPort ID from FW.

Fixes: edd05de197 ("scsi: qla2xxx: Changes to support N2N logins")
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02 16:56:18 -04:00
Darren Trapp 623ee824e5 scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset
Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21 18:38:54 -04:00
Darren Trapp e473b30741 scsi: qla2xxx: Add FC-NVMe abort processing
Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21 18:38:54 -04:00
Darren Trapp 9dd9686b14 scsi: qla2xxx: Add changes for devloss timeout in driver
Add support for error recovery within devloss timeout, now that
FC-NVMe transport support devloss timeout.

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21 18:38:54 -04:00
himanshu.madhani@cavium.com 0f7e51f6b3 scsi: qla2xxx: Move function prototype to correct header
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-07 14:04:02 -04:00
Duane Grigsby e84067d743 scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration
This code provides the interfaces to register remote and local ports of
FC4 type 0x28 with the FC-NVMe transport and transports the requests
(FC-NVMe FC link services and FC-NVMe commands IUs) to the fabric. It
also provides the support for allocating h/w queues and aborting FC-NVMe
FC requests.

Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com>
Signed-off-by: Anil Gurumurthy <anil.gurumurhty@cavium.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-27 21:21:47 -04:00