Replace seq_printf where possible.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Sage Weil <sage@inktank.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Do not assume that r_old_dentry implies that r_old_dentry_dir is also
true. Separate out the ref cleanup and make the debugs dump behave when
it is NULL.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
The debugfs directory includes the cluster fsid and our unique global_id.
We need to delay the initialization of the debug entry until we have
learned both the fsid and our global_id from the monitor or else the
second client can't create its debugfs entry and will fail (and multiple
client instances aren't properly reflected in debugfs).
Reported by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
We carry a pin on the parent directory for the rename source and dest
dentries. For the source it's r_locked_dir; we need to explicitly
reference the old_dentry parent as well, since the dentry's d_parent may
change between when the request was created and pinned and when it is
freed.
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
The r_mds field is redundant, since we can find the same information at
r_session->s_mds, and when r_session is NULL then r_mds is meaningless.
Signed-off-by: Sage Weil <sage@newdream.net>
Include "super.h" outside of CONFIG_DEBUG_FS to eliminate a compiler warning:
fs/ceph/debugfs.c:266: warning: 'struct ceph_fs_client' declared inside parameter list
fs/ceph/debugfs.c:266: warning: its scope is only this definition or declaration, which is probably not what you want
fs/ceph/debugfs.c:271: warning: 'struct ceph_fs_client' declared inside parameter list
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph. This
is mostly a matter of moving files around. However, a few key pieces
of the interface change as well:
- ceph_client becomes ceph_fs_client and ceph_client, where the latter
captures the mon and osd clients, and the fs_client gets the mds client
and file system specific pieces.
- Mount option parsing and debugfs setup is correspondingly broken into
two pieces.
- The mon client gets a generic handler callback for otherwise unknown
messages (mds map, in this case).
- The basic supported/required feature bits can be expanded (and are by
ceph_fs_client).
No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.
Signed-off-by: Sage Weil <sage@newdream.net>
ceph_mdsc_build_path() returns an ERR_PTR but this code is set up to
handle NULL returns.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
This is being done so that we could reuse the statfs
infrastructure with other requests that return values.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Since we can now create and destroy pg pools, the pool ids will be sparse,
and an array no longer makes sense for looking up by pool id. Use an
rbtree instead.
The OSDMap encoding also no longer has a max pool count (previously used to
allocate the array). There is a new pool_max, that is the largest pool id
we've ever used, although we don't actually need it in the client.
Signed-off-by: Sage Weil <sage@newdream.net>
Use a global counter for the minimum number of allocated caps instead of
hard coding a check against readdir_max. This takes into account multiple
client instances, and avoids examining the superblock mount options when a
cap is dropped.
Signed-off-by: Sage Weil <sage@newdream.net>
An rbtree is lighter weight, particularly given we will generally have
very few in-flight statfs requests.
Signed-off-by: Sage Weil <sage@newdream.net>
The rbtree is a more appropriate data structure than a radix_tree. It
avoids extra memory usage and simplifies the code.
It also fixes a bug where the debugfs 'mdsc' file wasn't including the
most recent mds request.
Signed-off-by: Sage Weil <sage@newdream.net>
Set bdi congestion bit when amount of write data in flight exceeds adjustable
threshold.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
We may first learn our fsid from any of the mon, osd, or mds maps
(whichever the monitor sends first). Consolidate checks in a single
helper. Initialize the client debugfs entry then, since we need the
fsid (and global_id) for the directory name.
Also remove dead mount code.
Signed-off-by: Sage Weil <sage@newdream.net>
Basic state information is available via /sys/kernel/debug/ceph,
including instances of the client, fsids, current monitor, mds and osd
maps, outstanding server requests, and hooks to adjust debug levels.
Signed-off-by: Sage Weil <sage@newdream.net>
Al Viro