Commit Graph

25 Commits

Author SHA1 Message Date
Michael Neuling bffe6bda34 powerpc/powernv: Add OPAL check token call
Currently there is no way to generically check if an OPAL call exists or not
from the host kernel.

This adds an OPAL call opal_check_token() which tells you if the given token is
present in OPAL or not.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-25 23:14:35 +10:00
Vasant Hegde b09c2ec408 powerpc/powernv: Interface to register/unregister opal dump region
PowerNV platform is capable of capturing host memory region when system
crashes (because of host/firmware). We have new OPAL API to register/
unregister memory region to be captured when system crashes.

This patch adds support for new API. Also during boot time we register
kernel log buffer and unregister before doing kexec.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13 15:13:45 +10:00
Mahesh Salgaonkar 0ef95b411e powerpc/powernv: Invoke opal call to handle hmi.
When we hit the HMI in Linux, invoke opal call to handle/recover from HMI
errors in real mode and then in virtual mode during check_irq_replay()
invoke opal_poll_events()/opal_do_notifier() to retrieve HMI event from
OPAL and act accordingly.

Now that we are ready to handle HMI interrupt directly in linux, remove
the HMI interrupt registration with firmware.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05 16:33:52 +10:00
Gavin Shan 5ca27efbd8 powerpc/powernv: Allow to freeze PE
The patch synchronizes header file with firmware to have new OPAL
API opal_pci_eeh_freeze_set(), which is used to freeze the specified
PE in order to support "compound" PE.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05 15:41:52 +10:00
Anton Blanchard c49f63530b powernv: Add OPAL tracepoints
Knowing how long we spend in firmware calls is an important part of
minimising OS jitter.

This patch adds tracepoints to each OPAL call. If tracepoints are
enabled we branch out to a common routine that calls an entry and exit
tracepoint.

This allows us to write tools that monitor the frequency and duration
of OPAL calls, eg:

name                  count  total(ms)  min(ms)  max(ms)  avg(ms)  period(ms)
OPAL_HANDLE_INTERRUPT     5      0.199    0.037    0.042    0.040   12547.545
OPAL_POLL_EVENTS        204      2.590    0.012    0.036    0.013    2264.899
OPAL_PCI_MSI_EOI       2830      3.066    0.001    0.005    0.001      81.166

We use jump labels if configured, which means we only add a single
nop instruction to every OPAL call when the tracepoints are disabled.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-11 16:06:08 +10:00
Benjamin Herrenschmidt 4926616c77 powerpc/powernv: Add calls to support little endian host
When running as a powernv "host" system on P8, we need to switch
the endianness of interrupt handlers. This does it via the appropriate
call to the OPAL firmware which may result in just switching HID0:HILE
but depending on the processor version might need to do a few more
things. This call must be done early before any other processor has
been brought out of firmware.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-05 13:19:59 +10:00
Anton Blanchard ad0289e4ac powerpc: Remove superflous function descriptors in assembly only code
We have a number of places where we load the text address of a local
function and indirectly branch to it in assembly. Since it is an
indirect branch binutils will not know to use the function text
address, so that trick wont work.

There is no need for these functions to have a function descriptor
so we can replace it with a label and remove the dot symbol.

Signed-off-by: Anton Blanchard <anton@samba.org>
2014-04-23 10:05:17 +10:00
Joel Stanley e28b05e7ae powerpc/powernv: Add invalid OPAL call
This call will not be understood by OPAL, and cause it to add an error
to it's log. Among other things, this is useful for testing the
behaviour of the log as it fills up.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-09 12:53:23 +10:00
Linus Torvalds e6d9bfc638 Merge branch 'powernv-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc non-virtualized cpuidle from Ben Herrenschmidt:
 "This is the branch I mentioned in my other pull request which contains
  our improved cpuidle support for the "powernv" platform
  (non-virtualized).

  It adds support for the "fast sleep" feature of the processor which
  provides higher power savings than our usual "nap" mode but at the
  cost of losing the timers while asleep, and thus exploits the new
  timer broadcast framework to work around that limitation.

  It's based on a tip timer tree that you seem to have already merged"

* 'powernv-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  cpuidle/powernv: Parse device tree to setup idle states
  cpuidle/powernv: Add "Fast-Sleep" CPU idle state
  powerpc/powernv: Add OPAL call to resync timebase on wakeup
  powerpc/powernv: Add context management for Fast Sleep
  powerpc: Split timer_interrupt() into timer handling and interrupt handling routines
  powerpc: Implement tick broadcast IPI as a fixed IPI message
  powerpc: Free up the slot of PPC_MSG_CALL_FUNC_SINGLE IPI message
2014-04-02 13:47:29 -07:00
Neelesh Gupta 7224adbbb8 powerpc/powernv: Enable fetching of platform sensor data
This patch enables fetching of various platform sensor data through
OPAL and expects a sensor handle from the driver to pass to OPAL.

Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-24 09:48:21 +11:00
Neelesh Gupta 4029cd6654 powerpc/powernv: Enable reading and updating of system parameters
This patch enables reading and updating of system parameters through
OPAL call.

Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-24 09:47:30 +11:00
Stewart Smith c7e64b9ce0 powerpc/powernv Platform dump interface
This enables support for userspace to fetch and initiate FSP and
Platform dumps from the service processor (via firmware) through sysfs.

Based on original patch from Vasant Hegde <hegdevasant@linux.vnet.ibm.com>

Flow:
  - We register for OPAL notification events.
  - OPAL sends new dump available notification.
  - We make information on dump available via sysfs
  - Userspace requests dump contents
  - We retrieve the dump via OPAL interface
  - User copies the dump data
  - userspace sends ack for dump
  - We send ACK to OPAL.

sysfs files:
  - We add the /sys/firmware/opal/dump directory
  - echoing 1 (well, anything, but in future we may support
    different dump types) to /sys/firmware/opal/dump/initiate_dump
    will initiate a dump.
  - Each dump that we've been notified of gets a directory
    in /sys/firmware/opal/dump/ with a name of the dump type and ID (in hex,
    as this is what's used elsewhere to identify the dump).
  - Each dump has files: id, type, dump and acknowledge
    dump is binary and is the dump itself.
    echoing 'ack' to acknowledge (currently any string will do) will
    acknowledge the dump and it will soon after disappear from sysfs.

OPAL APIs:
  - opal_dump_init()
  - opal_dump_info()
  - opal_dump_read()
  - opal_dump_ack()
  - opal_dump_resend_notification()

Currently we are only ever notified for one dump at a time (until
the user explicitly acks the current dump, then we get a notification
of the next dump), but this kernel code should "just work" when OPAL
starts notifying us of all the dumps present.

Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-07 16:19:10 +11:00
Stewart Smith 774fea1a38 powerpc/powernv: Read OPAL error log and export it through sysfs
Based on a patch by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>

This patch adds support to read error logs from OPAL and export
them to userspace through a sysfs interface.

We export each log entry as a directory in /sys/firmware/opal/elog/

Currently, OPAL will buffer up to 128 error log records, we don't
need to have any knowledge of this limit on the Linux side as that
is actually largely transparent to us.

Each error log entry has the following files: id, type, acknowledge, raw.
Currently we just export the raw binary error log in the 'raw' attribute.
In a future patch, we may parse more of the error log to make it a bit
easier for userspace (e.g. to be able to display a brief summary in
petitboot without having to have a full parser).

If we have >128 logs from OPAL, we'll only be notified of 128 until
userspace starts acknowledging them. This limitation may be lifted in
the future and with this patch, that should "just work" from the linux side.

A userspace daemon should:
- wait for error log entries using normal mechanisms (we announce creation)
- read error log entry
- save error log entry safely to disk
- acknowledge the error log entry
- rinse, repeat.

On the Linux side, we read the error log when we're notified of it. This
possibly isn't ideal as it would be better to only read them on-demand.
However, this doesn't really work with current OPAL interface, so we
read the error log immediately when notified at the moment.

I've tested this pretty extensively and am rather confident that the
linux side of things works rather well. There is currently an issue with
the service processor side of things for >128 error logs though.

Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-07 16:19:00 +11:00
Vaidyanathan Srinivasan 97eb001f03 powerpc/powernv: Add OPAL call to resync timebase on wakeup
During "Fast-sleep" and deeper power savings state, decrementer and
timebase could be stopped making it out of sync with rest
of the cores in the system.

Add a firmware call to request platform to resync timebase
using low level platform methods.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-05 15:56:54 +11:00
Vasant Hegde f7d98d18a0 powerpc/powernv: Call OPAL sync before kexec'ing
Its possible that OPAL may be writing to host memory during
kexec (like dump retrieve scenario). In this situation we might
end up corrupting host memory.

This patch makes OPAL sync call to make sure OPAL stops
writing to host memory before kexec'ing.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-15 17:21:18 +11:00
Mahesh Salgaonkar 2436636003 powerpc/powernv: Infrastructure to read opal messages in generic format.
Opal now has a new messaging infrastructure to push the messages to
linux in a generic format for different type of messages using only one
event bit. The format of the opal message is as below:

struct opal_msg {
        uint32_t msg_type;
	uint32_t reserved;
	uint64_t params[8];
};

This patch allows clients to subscribe for notification for specific
message type. It is upto the subscriber to decipher the messages who showed
interested in receiving specific message type.

The interface to subscribe for notification is:

	int opal_message_notifier_register(enum OpalMessageType msg_type,
                                        struct notifier_block *nb)

The notifier will fetch the opal message when available and notify the
subscriber with message type and the opal message. It is subscribers
responsibility to copy the message data before returning from notifier
callback.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-05 16:08:15 +11:00
Vasant Hegde 50bd6153d1 powerpc/powernv: Code update interface
Code update interface for powernv platform. This provides
sysfs interface to pass new image, validate, update and
commit images.

This patch includes:
  - Below OPAL APIs for code update
    - opal_validate_flash()
    - opal_manage_flash()
    - opal_update_flash()

  - Create below sysfs files under /sys/firmware/opal
    - image		: Interface to pass new FW image
    - validate_flash	: Validate candidate image
    - manage_flash	: Commit/Reject operations
    - update_flash	: Flash new candidate image

Updating Image:
  "update_flash" is an interface to indicate flash new FW.
It just passes image SG list to FW. Actual flashing is done
during system reboot time.

Note:
  - SG entry format:
    I have kept version number to keep this list similar to what
    PAPR is defined.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 16:12:02 +11:00
Anton Blanchard bbe30b3b57 powerpc: Use 32 bit loads and stores when operating on condition register values
The condition register (CR) is a 32 bit quantity so we should use
32 bit loads and stores.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 16:02:14 +11:00
Benjamin Herrenschmidt be401b372f powerpc/powernv: Fix OPAL entry and exit in little endian mode
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-11 16:48:49 +11:00
Benjamin Herrenschmidt 13906db670 powerpc/powernv: Return secondary CPUs to firmware on kexec
With OPAL v3 we can return secondary CPUs to firmware on kexec. This
allows firmware to do various cleanups making things generally more
reliable, and will enable the "new" kernel to call OPAL to perform
some reconfiguration tasks early on that can only be done while
all the CPUs are in firmware.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-27 17:43:50 +10:00
Benjamin Herrenschmidt cc0efb57eb powerpc/powernv: Update opal.h to add new LPC and XSCOM functions
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 14:57:56 +10:00
Gavin Shan 23773230c8 powerpc/eeh: Sync OPAL API with firmware
The patch synchronizes OPAL APIs between kernel and firmware. Also,
we starts to replace opal_pci_get_phb_diag_data() with the similar
opal_pci_get_phb_diag_data2() and the former OPAL API would return
OPAL_UNSUPPORTED from now on.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20 17:06:17 +10:00
Gavin Shan 137436c9a6 powerpc/powernv: Patch MSI EOI handler on P8
The EOI handler of MSI/MSI-X interrupts for P8 (PHB3) need additional
steps to handle the P/Q bits in IVE before EOIing the corresponding
interrupt. The patch changes the EOI handler to cover that. we have
individual IRQ chip in each PHB instance. During the MSI IRQ setup
time, the IRQ chip is copied over from the original one for that IRQ,
and the EOI handler is patched with the one that will handle the P/Q
bits (As Ben suggested).

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-26 16:09:59 +10:00
Benjamin Herrenschmidt f11fe5524a powerpc/powernv: Update OPAL interfaces
This adds some more interfaces for OPAL v2

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-07 18:02:02 +11:00
Benjamin Herrenschmidt 14a43e69ed powerpc/powernv: Basic support for OPAL
Add definition of OPAL interfaces along with  the wrappers to call
into OPAL runtime and the early device-tree parsing hook to locate
the OPAL runtime firmware.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 16:09:50 +10:00