Commit Graph

95 Commits

Author SHA1 Message Date
Octavian Purdila 70dddeee89 iio: fix drivers that check buffer->scan_mask
If the in-kernel push interface is used we may have a different masks
on the device buffer and the kernel buffer and in this case the device
should generate data for the reunion of the buffers, which is
available at indio_dev->active_scan_mask.

Compiled tested only except for bmc150-accel which was tested at
runtime with the hardware.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-07 19:17:07 +00:00
Karol Wrona a9afcaa69f iio: common: ssp_sensors: Add sensorhub gyroscope sensor
This patch adds gyroscope iio driver which uses sensorhub as data
provider.

Signed-off-by: Karol Wrona <k.wrona@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-29 18:49:56 +00:00
Srinivas Pandruvada 27ce423936 iio: hid-sensor-gyro-3d: Introduce PM
Use common hid sensor iio pm functions. Also the poll time read and
wait is part of power up function of hid sensor iio pm function, so
remove from the client drivers.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-25 22:55:45 +00:00
Linus Torvalds dab363f938 Staging patches for 3.19-rc1
Here's the big staging tree pull request for 3.19-rc1.
 
 We continued to delete more lines than were added, always a good thing,
 but not at a huge rate this release, only about 70k lines removed
 overall mostly from removing the horrid bcm driver.
 
 Lots of normal staging driver cleanups and fixes all over the place,
 well over a thousand of them, the shortlog shows all the horrid details.
 
 The "contentious" thing here is the movement of the Android binder code
 out of staging into the "real" part of the kernel.  This is code that
 has been stable for a few years now and is working as-is in the tens of
 millions of devices with no issues.  Yes, the code is horrid, and the
 userspace api leaves a lot to be desired, but it's not going to change
 due to legacy issues that we have no control over.  Because so many
 devices and companies rely on this, and the code is stable, might as
 well promote it out of staging.
 
 This was all discussed at the Linux Plumbers conference, and everyone
 participating agreed that this was the best way forward.
 
 There is work happening to replace the binder code with something new
 that is happening right now, but I don't expect to see the results of
 that work for another year at the earliest.  If that ever happens, and
 Android switches over to it, I'll gladly remove this version.
 
 As for maintainers, I'll be glad to maintain this code, I've been doing
 it for the past few years with no problems.  I'll send a MAINTAINERS
 entry for it before 3.19-final is out, still need to talk to the Google
 developers about if they are willing to help with it or not, last I
 checked they were, which was good.
 
 All of these patches have been in linux-next for a while with no
 reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSPICkACgkQMUfUDdst+yksdwCfSLE9VUy1o2sAPDRe+J3bQced
 EWEAoL3RtnejKbo5tHS2IT69pLrwiIDS
 =YXyM
 -----END PGP SIGNATURE-----

Merge tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here's the big staging tree pull request for 3.19-rc1.

  We continued to delete more lines than were added, always a good
  thing, but not at a huge rate this release, only about 70k lines
  removed overall mostly from removing the horrid bcm driver.

  Lots of normal staging driver cleanups and fixes all over the place,
  well over a thousand of them, the shortlog shows all the horrid
  details.

  The "contentious" thing here is the movement of the Android binder
  code out of staging into the "real" part of the kernel.  This is code
  that has been stable for a few years now and is working as-is in the
  tens of millions of devices with no issues.  Yes, the code is horrid,
  and the userspace api leaves a lot to be desired, but it's not going
  to change due to legacy issues that we have no control over.  Because
  so many devices and companies rely on this, and the code is stable,
  might as well promote it out of staging.

  This was all discussed at the Linux Plumbers conference, and everyone
  participating agreed that this was the best way forward.

  There is work happening to replace the binder code with something new
  that is happening right now, but I don't expect to see the results of
  that work for another year at the earliest.  If that ever happens, and
  Android switches over to it, I'll gladly remove this version.

  As for maintainers, I'll be glad to maintain this code, I've been
  doing it for the past few years with no problems.  I'll send a
  MAINTAINERS entry for it before 3.19-final is out, still need to talk
  to the Google developers about if they are willing to help with it or
  not, last I checked they were, which was good.

  All of these patches have been in linux-next for a while with no
  reported issues"

* tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1382 commits)
  Staging: slicoss: Fix long line issues in slicoss.c
  staging: rtl8712: remove unnecessary else after return
  staging: comedi: change some printk calls to pr_err
  staging: rtl8723au: hal: Removed the extra semicolon
  lustre: Deletion of unnecessary checks before three function calls
  staging: lustre: fix sparse warnings: static function declaration
  staging: lustre: fixed sparse warnings related to static declarations
  staging: unisys: remove duplicate header
  staging: unisys: remove unneeded structure
  staging: ft1000 : replace __attribute ((__packed__) with __packed
  drivers: staging: rtl8192e: Include "asm/unaligned.h" instead of "access_ok.h" in "rtl819x_BAProc.c"
  Drivers:staging:rtl8192e: Fixed checkpatch warning
  Drivers:staging:clocking-wizard: Added a newline
  staging: clocking-wizard: check for a valid clk_name pointer
  staging: rtl8723au: Hal_InitPGData() avoid unnecessary typecasts
  staging: rtl8723au: _DisableAnalog(): Avoid zero-init variables unnecessarily
  staging: rtl8723au: Remove unnecessary wrapper _ResetDigitalProcedure1()
  staging: rtl8723au: _ResetDigitalProcedure1_92C() reduce code obfuscation
  staging: rtl8723au: Remove unnecessary wrapper _DisableRFAFEAndResetBB()
  staging: rtl8723au: _DisableRFAFEAndResetBB8192C(): Reduce code obfuscation
  ...
2014-12-15 18:06:13 -08:00
Rafael J. Wysocki e3d857e1ae Merge branch 'pm-runtime'
* pm-runtime: (25 commits)
  i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c
  dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME
  MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  hwrandom / exynos / PM: Use CONFIG_PM in #ifdef
  block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  USB / PM: Drop CONFIG_PM_RUNTIME from the USB core
  PM: Merge the SET*_RUNTIME_PM_OPS() macros
  PM / Kconfig: Do not select PM directly from Kconfig files
  PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core
  ...
2014-12-08 20:00:44 +01:00
Rafael J. Wysocki 6f0a13f25e iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under
drivers/iio/.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2014-12-04 01:08:13 +01:00
Greg Kroah-Hartman deef2a118a Merge 3.18-rc7 into staging-work.
We want those staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02 16:20:59 -08:00
Srinivas Pandruvada 6896ab3a8c iio: gyro: bmg160: Fix iio_event_spec direction
Change event spec direction from
IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING
to
IIO_EV_DIR_EITHER

Suggested-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-16 20:19:25 +00:00
Srinivas Pandruvada cb80f6a36b iio: gyro: bmg160: Send x, y and z motion separately
This chip is capable to identify motion across x, y and z axes. So
send different events.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-16 20:19:22 +00:00
Srinivas Pandruvada 5af6b30788 iio: gyro: bmg160: Don't let interrupt mode to be open drain
Change the mode to push/pull type instead of open drain as some
platforms fails to drive the GPIO pin with open drain.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-16 20:19:20 +00:00
Srinivas Pandruvada 10bef28973 iio: gyro: bmg160: Error handling when mode set fails
When mode set fails due to some transient failures, it will atleast
reset the state of runtime usage count and also let the runtime
suspend retry from the driver framework.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-16 20:19:18 +00:00
Greg Kroah-Hartman be61a0d784 First round of new drivers, features and cleanups for IIO in the 3.19 cycle.
New drivers / supported parts
 * rockchip - rk3066-tsadc variant
 * si7020 humidity and temperature sensor
 * mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202
 * bmp280 pressure and temperature sensor
 * Qualcomm SPMI PMIC current ADC driver
 * Exynos_adc - support exynos7
 
 New features
 * vf610-adc - add temperature sensor support
 * Documentation of current attributes, scaled pressure, offset and
   scaled humidity, RGBC intensity gain factor and scale applied to
   differential voltage channels.
 * Bring iio_event_monitor up to date with newer modifiers.
 * Add of_xlate function to allow for complex channel mappings from the
   device tree.
 * Add -g parameter to generic_buffer example to allow for devices with
   directly fed (no trigger) buffers.
 * Move exynos driver over to syscon for PMU register access.
 
 Cleanups, fixes for new drivers
 * lis3l02dq drop an unneeded else.
 * st sensors - renam st_sensors to st_sensor_settings (for clarity)
 * st sensors - drop an unused parameter from all the probe utility
   functions.
 * vf610 better error handling and tidy up.
 * si7020 - cleanups following merge
 * as3935 - drop some unnecessary semicolons.
 * bmp280 - fix the pressure calculation.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUWnZBAAoJEFSFNJnE9BaIZAAQAJpkot0ZAYPwtIkmtV1JqrLQ
 EZRkBN+cIf3q5zp/TnQTqfyhKbpHbJ9/Pnb0zHvn7Yh3WpZod2tyoC3xb8JAlX2h
 3tJRrA7plkdMjtwO/ryOxrVJYrm6rCeqKpciwMpDf4E/4fhU5CU++TpmWbhn04qB
 7PEZJN5dkmdnQYSIyNle11MYN+NpCAB4zqDvRJoJHpqZV6zAqygJy03H1PqXFS/S
 iNBL3jS8/PTbeUURUFOQTiqnJw5KuDke7OoXxUfvCpUwQfNLD8mOTrVrEoId1cM0
 Y2fmasfHteh83KP34/MOTwNA3EezM8iQOMzJnXtOpxpySPDrDSP68FDAJs15TUJm
 je8E1xxxdjOWuzgSd9djNm9qhlBkoYgbRwzc8wSAHMK7mCV7pP485WZk5E8rRX2z
 gMFgUmu4LkiZ2V9glGTAcHqnjhLNDTRCp1Nl/sMVgssFBBNjgR5+nZjUFqDR2QpD
 eo4ReIzev7Rzxe2lACRjnRrCnO+KKcjiDkyCdM3X2zdTddQRVrP5Uz+jgnvGAeMO
 hCYDHSOiMzV/r5emVfmNG9w8P9a6rZqu4KqcM/KjSzAfHFQTqmfr4Tkfn/hbeUjY
 h/zzB18EM4kUSxm3E6+CbFRWcfC7b/PLcUOwSitdujb9cYaX72gdesO2/P3jNFAK
 2bjoLRr5l4M4n/DeHae4
 =BDOo
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new drivers, features and cleanups for IIO in the 3.19 cycle.

New drivers / supported parts
* rockchip - rk3066-tsadc variant
* si7020 humidity and temperature sensor
* mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202
* bmp280 pressure and temperature sensor
* Qualcomm SPMI PMIC current ADC driver
* Exynos_adc - support exynos7

New features
* vf610-adc - add temperature sensor support
* Documentation of current attributes, scaled pressure, offset and
  scaled humidity, RGBC intensity gain factor and scale applied to
  differential voltage channels.
* Bring iio_event_monitor up to date with newer modifiers.
* Add of_xlate function to allow for complex channel mappings from the
  device tree.
* Add -g parameter to generic_buffer example to allow for devices with
  directly fed (no trigger) buffers.
* Move exynos driver over to syscon for PMU register access.

Cleanups, fixes for new drivers
* lis3l02dq drop an unneeded else.
* st sensors - renam st_sensors to st_sensor_settings (for clarity)
* st sensors - drop an unused parameter from all the probe utility
  functions.
* vf610 better error handling and tidy up.
* si7020 - cleanups following merge
* as3935 - drop some unnecessary semicolons.
* bmp280 - fix the pressure calculation.
2014-11-05 11:42:48 -08:00
Denis CIOCCA 7be178bb48 iio:common: Set the device pointer into ST common sensors library
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 11:26:21 +01:00
Denis CIOCCA ef67b34147 iio:gyro: Removed unnecessary parameter on common_probe function
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 11:24:52 +01:00
Denis CIOCCA a7ee8839da iio:imu: changed structure name from st_sensors to st_sensor_settings
This patch change structure name and related variables names.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 11:23:13 +01:00
Greg Kroah-Hartman d84a2b0d6f Merge 3.17-rc6 into staging-next.
We want the fixes in there, and it resolves a merge issue with
drivers/iio/accel/bma180.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-22 07:30:03 -07:00
Irina Tirdea 3a0888edcf iio: gyro: bmi055 gyro sensor driver
Add support for the BMI055 gyroscope sensor. BMI055 is a package
consisting of an acceleration sensor and a gyroscope. This patch
adds support for the gyroscope only.

Spec downloaded from:
http://ae-bst.resource.bosch.com/media/products/dokumente/bmi055/BST-BMI055-DS000-06.pdf

The BMI055 gyroscope uses the same register definition as BMG160,
but does not specify a temp register. However, the temp register
seems to be working in the same way as for BMG160, so this patch
does not remove the temp channel for BMI055.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:40:42 +01:00
Irina Tirdea ef1c6b2335 iio: gyro: bmg160: only set power state if PM_RUNTIME is defined
When CONFIG_PM_RUNTIME is not defined and bmg160 tries to power
off the device, bmg160_set_power_state will call pm_runtime_put_autosuspend,
which is not implemented (wil return -ENOSYS).

Only call bmg160_set_power_state when CONFIG_PM_RUNTIME is defined.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:29:19 +01:00
Sanjeev Sharma 81816affea iio: remove .owner field for driver using module_platform_driver
This patch removes the .owner field for drivers which use the
platform_driver_register api because this is overriden in
_platform_driver_register.

Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-26 21:08:38 +01:00
Srinivas Pandruvada 22b46c45fb iio:gyro:bmg160 Gyro Sensor driver
This change implements support for BMG160 Gyro sensor. Although chip
has several advanced features, this change implements minimum set
required for using gyro sensor.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-26 18:36:54 +01:00
Srinivas Pandruvada 0b4dce2ee6 iio: gyro: itg3200: Fix indio_dev->trig assignment
This can result in wrong reference count for trigger device, call
iio_trigger_get to increment reference.
Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion
with Jonathan.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: Stable@vger.kernel.org
2014-08-25 21:49:00 +01:00
Greg Kroah-Hartman 589e1d10ff Merge 3.16-rc5 into staging-next
We want the fixes in -rc5 in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-13 15:35:56 -07:00
Linus Walleij 2d7768a872 iio: st_sensors: add devicetree probing support
The I2C devices that make up the STMicroelectronics MEMS sensors
may be sneakily enabled by cleverly giving the device node the same
name as a string match from the platform device ID table. However
the right method is to use the compatible string.

On detection, the ST sensors use the ID string to probe and
instatiate the right sensor driver, so pass the kernel-internal ID
string in the .data field of the OF match table, and set the I2C
client name to this name when a compatible match is used.

This avoids having misc Linux-specific strings floating around in
the device tree.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-11 21:09:49 +01:00
Jonathan Cameron 82695ef549 iio: adis: Switch sampling frequency attr to core support.
By using the info_mask_shared_by_all element of the channel spec, acce
to the sampling frequency becomes available to in kernel users of the
driver.  It also shortens and simplifies the code.

This particular conversion was made more complicated by the shared library
and the fact that a number of the drivers do not actually have support for
setting or reading the sampling frequency.  The hardware, in those cases
investigated supports it. It's just never been implemented.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2014-07-07 09:44:17 +01:00
Jonathan Cameron 95bb8918f9 iio: gyro: itg3200 switch sampling frequency attr to core support.
By using the info_mask_shared_by_all element of the channel spec, access
to the sampling frequency becomes available to in kernel users of the
driver.  It also shortens and simplifies the code a little.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Cc: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Cc: Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de>
Cc: Christian Strobel <christian.strobel@iis.fraunhofer.de>
2014-07-07 09:41:32 +01:00
Jonathan Cameron 2d239c9e92 iio:st sensors: remove custom sampling frequence attribute in favour of core support.
This allows in kernel client drivers to access this

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
2014-07-07 09:39:57 +01:00
Sachin Kamat 27793803f2 iio: hid-sensor-gyro-3d: Fix return values
IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored
the actual return values (which could be -EINVAL) and instead
returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value
obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO
upon success.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-05 11:07:58 +01:00
Srinivas Pandruvada 0964f706dc iio: hid-sensors: Gyro 3D: Raw read support
Added support for raw reading of channel. If the sensor is powered
off, it will turn on for reading value.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-05-05 10:59:50 +01:00
Srinivas Pandruvada 56ff6be608 iio: hid-sensors: Add API to power on/off
Added an API to allow client drivers to turn ON and OFF sensors for
quick read. Added data_read as counting varaible instead of boolean,
so that sensor is powered off only when last user released it.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-05-05 10:59:49 +01:00
Srinivas Pandruvada 6c7db77e40 iio: hid-sensors: Gyro 3D : adjust scale and offset
Using units and unit exponent to calculate scale which is compliant
to IIO ABI.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-05-05 10:59:46 +01:00
Linus Walleij ea7e586bdd iio: st_sensors: move regulator retrieveal to core
Currently the pressure sensor has code to retrieve and enable two
regulators for Vdd and Vdd IO, but actually these voltage inputs
are found on all of these ST sensors, so move the regulator
handling to the core and make sure all the ST sensors call these
functions on probe() and remove() to enable/disable power.

Here also mover over to obtaining the regulator from the *parent*
device of the IIO device, as the IIO device is created on-the-fly
in this very subsystem it very unlikely evert have any regulators
attached to it whatsoever. It is much more likely that the parent
is a platform device, possibly instantiated from a device tree,
which in turn have Vdd and Vdd IO supplied assigned to it.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-26 11:52:42 +01:00
Linus Walleij 4f544ced19 iio: st_sensors: announce registered sensors
It is pretty helpful to know already from dmesg that a certain
device is successfully registered, instead of having to browse
sysfs to see if it's actually there.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-26 11:50:59 +01:00
Jonathan Cameron 239670ef48 iio:gyro:itg3200 - drop unreachable return ret. Highlighted by smatch
CHECK   drivers/iio/gyro/itg3200_core.c
drivers/iio/gyro/itg3200_core.c:114 itg3200_read_raw() info: ignoring unreachable code.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
2014-03-16 18:00:35 +00:00
Denis CIOCCA a065771641 iio:gyro: bug on L3GD20H gyroscope support
The driver was not able to manage the sensor: during probe function
and wai check, the driver stops and writes: "device name and WhoAmI mismatch."
The correct value of L3GD20H wai is 0xd7 instead of 0xd4.
Dropped support for the sensor.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-18 10:24:49 +00:00
Greg Kroah-Hartman 06749f192b Merge v3.13-rc2 into staging-next
we want these fixes in here.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-02 16:39:07 -08:00
Sachin Kamat 9bcbf02ae3 iio: gyro: adxrs450: Use devm_iio_device_register
devm_iio_device_register simplifies the code.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-24 21:07:18 +00:00
Sachin Kamat 79788b7c44 iio: gyro: adis16130: Use devm_iio_device_register
devm_iio_device_register simplifies the code.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-24 21:07:17 +00:00
Srinivas Pandruvada 2371aebf02 iio: hid-sensors: gyro : Add sensitivity
A number of Properties that can be applied to Data Fields are per data
field basis or for all data fields. Adding sensitivity field for all
gyro fields, which is most commonly used in currently available
sensor hubs.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-05 23:02:53 +00:00
Srinivas Pandruvada ec7f68e07b iio: hid_Sensors: fix crash during trigger unregister
We can't store the trigger instance created by iio_trigger_alloc, in
trig field of iio_device structure. This needs to be stored in the
driver private data. Othewise it can result in crash during module
unload. Hence created a trig_ptr in the common data structure
for each HID sensor IIO driver and storing here.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-02 19:07:06 +00:00
Lars-Peter Clausen d4b2911b1f iio:st_gyro: Remove redundant call to iio_sw_buffer_preenable().
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-16 19:12:46 +01:00
Lars-Peter Clausen f28607f3bf iio:adis16130: Use spi_sync_transfer()
Use the spi_sync_transfer() helper function instead of open-coding it. Makes
the code a bit shorter.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-05 12:00:26 +01:00
Lars-Peter Clausen 35734fbdb5 iio:adxrs450: Use spi_sync_transfer()
Use the spi_sync_transfer() helper function instead of open-coding it. Makes
the code a bit shorter.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-05 11:59:38 +01:00
Lars-Peter Clausen af3d5cad0a iio:adis16080: Use spi_sync_transfer()
Use the spi_sync_transfer() helper function instead of open-coding it. Makes
the code a bit shorter.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-05 11:58:54 +01:00
Denis CIOCCA fb4ea1f828 iio:gyro: Register buffer also without specific trigger
This patch fix buffer registration that allows to use generic IIO trigger.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-21 19:24:08 +01:00
Lee Jones f01a140ad3 iio: gyro-core: st: Clean up error handling in probe()
Reduce the amount of those unnecessary goto calls, as in most cases
we can simply return immediately. We also only call for the IRQ number
once and use that value throughout.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-21 19:24:06 +01:00
Lars-Peter Clausen 36e0371e77 iio:itg3200: Use iio_push_to_buffers_with_timestamp()
Makes the code a bit shorter and less ugly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-21 19:23:56 +01:00
Lars-Peter Clausen 8c60c7e75d iio: Remove unnecessary casts for iio_push_to_buffers()
Now that iio_push_to_buffers() takes a void pointer for the data parameter we
can remove those casts to u8*.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-15 19:05:07 +01:00
Sachin Kamat 52c77c3dcb iio: gyro: adxrs450: Remove redundant break
'break' after return is redundant. Remove it.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14 11:37:01 +01:00
Sachin Kamat 356e9fa4e5 iio: gyro: adis16260: Remove redundant break
'break' after return is redundant. Remove it.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14 11:37:00 +01:00
Sachin Kamat 3c533efca0 iio: gyro: adis16130: Remove redundant break
'break' after return is redundant. Remove it.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14 11:36:59 +01:00