openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
400,612 Commits 19 Branches 27 Tags 3.4 GiB
Commit Graph

61338 Commits

Author SHA1 Message Date
Johannes Weiner 3812c8c8f3 mm: memcg: do not trap chargers with full callstack on OOM 
The memcg OOM handling is incredibly fragile and can deadlock.  When a
task fails to charge memory, it invokes the OOM killer and loops right
there in the charge code until it succeeds.  Comparably, any other task
that enters the charge path at this point will go to a waitqueue right
then and there and sleep until the OOM situation is resolved.  The problem
is that these tasks may hold filesystem locks and the mmap_sem; locks that
the selected OOM victim may need to exit.

For example, in one reported case, the task invoking the OOM killer was
about to charge a page cache page during a write(), which holds the
i_mutex.  The OOM killer selected a task that was just entering truncate()
and trying to acquire the i_mutex:

OOM invoking task:
  mem_cgroup_handle_oom+0x241/0x3b0
  mem_cgroup_cache_charge+0xbe/0xe0
  add_to_page_cache_locked+0x4c/0x140
  add_to_page_cache_lru+0x22/0x50
  grab_cache_page_write_begin+0x8b/0xe0
  ext3_write_begin+0x88/0x270
  generic_file_buffered_write+0x116/0x290
  __generic_file_aio_write+0x27c/0x480
  generic_file_aio_write+0x76/0xf0           # takes ->i_mutex
  do_sync_write+0xea/0x130
  vfs_write+0xf3/0x1f0
  sys_write+0x51/0x90
  system_call_fastpath+0x18/0x1d

OOM kill victim:
  do_truncate+0x58/0xa0              # takes i_mutex
  do_last+0x250/0xa30
  path_openat+0xd7/0x440
  do_filp_open+0x49/0xa0
  do_sys_open+0x106/0x240
  sys_open+0x20/0x30
  system_call_fastpath+0x18/0x1d

The OOM handling task will retry the charge indefinitely while the OOM
killed task is not releasing any resources.

A similar scenario can happen when the kernel OOM killer for a memcg is
disabled and a userspace task is in charge of resolving OOM situations.
In this case, ALL tasks that enter the OOM path will be made to sleep on
the OOM waitqueue and wait for userspace to free resources or increase
the group's limit.  But a userspace OOM handler is prone to deadlock
itself on the locks held by the waiting tasks.  For example one of the
sleeping tasks may be stuck in a brk() call with the mmap_sem held for
writing but the userspace handler, in order to pick an optimal victim,
may need to read files from /proc/<pid>, which tries to acquire the same
mmap_sem for reading and deadlocks.

This patch changes the way tasks behave after detecting a memcg OOM and
makes sure nobody loops or sleeps with locks held:

1. When OOMing in a user fault, invoke the OOM killer and restart the
   fault instead of looping on the charge attempt.  This way, the OOM
   victim can not get stuck on locks the looping task may hold.

2. When OOMing in a user fault but somebody else is handling it
   (either the kernel OOM killer or a userspace handler), don't go to
   sleep in the charge context.  Instead, remember the OOMing memcg in
   the task struct and then fully unwind the page fault stack with
   -ENOMEM.  pagefault_out_of_memory() will then call back into the
   memcg code to check if the -ENOMEM came from the memcg, and then
   either put the task to sleep on the memcg's OOM waitqueue or just
   restart the fault.  The OOM victim can no longer get stuck on any
   lock a sleeping task may hold.

Debugged by Michal Hocko.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: azurIt <azurit@pobox.sk>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-12 15:38:02 -07:00
Johannes Weiner 519e52473e mm: memcg: enable memcg OOM killer only for user faults 
System calls and kernel faults (uaccess, gup) can handle an out of memory
situation gracefully and just return -ENOMEM.

Enable the memcg OOM killer only for user faults, where it's really the
only option available.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: azurIt <azurit@pobox.sk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-12 15:38:01 -07:00
Johannes Weiner 759496ba64 arch: mm: pass userspace fault flag to generic fault handler 
Unlike global OOM handling, memory cgroup code will invoke the OOM killer
in any OOM situation because it has no way of telling faults occuring in
kernel context - which could be handled more gracefully - from
user-triggered faults.

Pass a flag that identifies faults originating in user space from the
architecture-specific fault handlers to generic code so that memcg OOM
handling can be improved.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: azurIt <azurit@pobox.sk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-12 15:38:01 -07:00
Michal Hocko de57780dc6 memcg: enhance memcg iterator to support predicates 
The caller of the iterator might know that some nodes or even subtrees
should be skipped but there is no way to tell iterators about that so the
only choice left is to let iterators to visit each node and do the
selection outside of the iterating code.  This, however, doesn't scale
well with hierarchies with many groups where only few groups are
interesting.

This patch adds mem_cgroup_iter_cond variant of the iterator with a
callback which gets called for every visited node.  There are three
possible ways how the callback can influence the walk.  Either the node is
visited, it is skipped but the tree walk continues down the tree or the
whole subtree of the current group is skipped.

[hughd@google.com: fix memcg-less page reclaim]
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-12 15:38:00 -07:00
Michal Hocko a5b7c87f92 vmscan, memcg: do softlimit reclaim also for targeted reclaim 
Soft reclaim has been done only for the global reclaim (both background
and direct).  Since "memcg: integrate soft reclaim tighter with zone
shrinking code" there is no reason for this limitation anymore as the soft
limit reclaim doesn't use any special code paths and it is a part of the
zone shrinking code which is used by both global and targeted reclaims.

From the semantic point of view it is natural to consider soft limit
before touching all groups in the hierarchy tree which is touching the
hard limit because soft limit tells us where to push back when there is a
memory pressure.  It is not important whether the pressure comes from the
limit or imbalanced zones.

This patch simply enables soft reclaim unconditionally in
mem_cgroup_should_soft_reclaim so it is enabled for both global and
targeted reclaim paths.  mem_cgroup_soft_reclaim_eligible needs to learn
about the root of the reclaim to know where to stop checking soft limit
state of parents up the hierarchy.  Say we have

A (over soft limit)
 \
  B (below s.l., hit the hard limit)
 / \
C   D (below s.l.)

B is the source of the outside memory pressure now for D but we shouldn't
soft reclaim it because it is behaving well under B subtree and we can
still reclaim from C (pressumably it is over the limit).
mem_cgroup_soft_reclaim_eligible should therefore stop climbing up the
hierarchy at B (root of the memory pressure).

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Glauber Costa <glommer@openvz.org>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-12 15:38:00 -07:00
Michal Hocko 3b38722efd memcg, vmscan: integrate soft reclaim tighter with zone shrinking code 
This patchset is sitting out of tree for quite some time without any
objections.  I would be really happy if it made it into 3.12.  I do not
want to push it too hard but I think this work is basically ready and
waiting more doesn't help.

The basic idea is quite simple.  Pull soft reclaim into shrink_zone in the
first step and get rid of the previous soft reclaim infrastructure.
shrink_zone is done in two passes now.  First it tries to do the soft
limit reclaim and it falls back to reclaim-all mode if no group is over
the limit or no pages have been scanned.  The second pass happens at the
same priority so the only time we waste is the memcg tree walk which has
been updated in the third step to have only negligible overhead.

As a bonus we will get rid of a _lot_ of code by this and soft reclaim
will not stand out like before when it wasn't integrated into the zone
shrinking code and it reclaimed at priority 0 (the testing results show
that some workloads suffers from such an aggressive reclaim).  The clean
up is in a separate patch because I felt it would be easier to review that
way.

The second step is soft limit reclaim integration into targeted reclaim.
It should be rather straight forward.  Soft limit has been used only for
the global reclaim so far but it makes sense for any kind of pressure
coming from up-the-hierarchy, including targeted reclaim.

The third step (patches 4-8) addresses the tree walk overhead by enhancing
memcg iterators to enable skipping whole subtrees and tracking number of
over soft limit children at each level of the hierarchy.  This information
is updated same way the old soft limit tree was updated (from
memcg_check_events) so we shouldn't see an additional overhead.  In fact
mem_cgroup_update_soft_limit is much simpler than tree manipulation done
previously.

__shrink_zone uses mem_cgroup_soft_reclaim_eligible as a predicate for
mem_cgroup_iter so the decision whether a particular group should be
visited is done at the iterator level which allows us to decide to skip
the whole subtree as well (if there is no child in excess).  This reduces
the tree walk overhead considerably.

* TEST 1
========

My primary test case was a parallel kernel build with 2 groups (make is
running with -j8 with a distribution .config in a separate cgroup without
any hard limit) on a 32 CPU machine booted with 1GB memory and both builds
run taskset to Node 0 cpus.

I was mostly interested in 2 setups.  Default - no soft limit set and -
and 0 soft limit set to both groups.  The first one should tell us whether
the rework regresses the default behavior while the second one should show
us improvements in an extreme case where both workloads are always over
the soft limit.

/usr/bin/time -v has been used to collect the statistics and each
configuration had 3 runs after fresh boot without any other load on the
system.

base is mmotm-2013-07-18-16-40
rework all 8 patches applied on top of base

* No-limit
User
no-limit/base: min: 651.92 max: 672.65 avg: 664.33 std: 8.01 runs: 6
no-limit/rework: min: 657.34 [100.8%] max: 668.39 [99.4%] avg: 663.13 [99.8%] std: 3.61 runs: 6
System
no-limit/base: min: 69.33 max: 71.39 avg: 70.32 std: 0.79 runs: 6
no-limit/rework: min: 69.12 [99.7%] max: 71.05 [99.5%] avg: 70.04 [99.6%] std: 0.59 runs: 6
Elapsed
no-limit/base: min: 398.27 max: 422.36 avg: 408.85 std: 7.74 runs: 6
no-limit/rework: min: 386.36 [97.0%] max: 438.40 [103.8%] avg: 416.34 [101.8%] std: 18.85 runs: 6

The results are within noise. Elapsed time has a bigger variance but the
average looks good.

* 0-limit
User
0-limit/base: min: 573.76 max: 605.63 avg: 585.73 std: 12.21 runs: 6
0-limit/rework: min: 645.77 [112.6%] max: 666.25 [110.0%] avg: 656.97 [112.2%] std: 7.77 runs: 6
System
0-limit/base: min: 69.57 max: 71.13 avg: 70.29 std: 0.54 runs: 6
0-limit/rework: min: 68.68 [98.7%] max: 71.40 [100.4%] avg: 69.91 [99.5%] std: 0.87 runs: 6
Elapsed
0-limit/base: min: 1306.14 max: 1550.17 avg: 1430.35 std: 90.86 runs: 6
0-limit/rework: min: 404.06 [30.9%] max: 465.94 [30.1%] avg: 434.81 [30.4%] std: 22.68 runs: 6

The improvement is really huge here (even bigger than with my previous
testing and I suspect that this highly depends on the storage).  Page
fault statistics tell us at least part of the story:

Minor
0-limit/base: min: 37180461.00 max: 37319986.00 avg: 37247470.00 std: 54772.71 runs: 6
0-limit/rework: min: 36751685.00 [98.8%] max: 36805379.00 [98.6%] avg: 36774506.33 [98.7%] std: 17109.03 runs: 6
Major
0-limit/base: min: 170604.00 max: 221141.00 avg: 196081.83 std: 18217.01 runs: 6
0-limit/rework: min: 2864.00 [1.7%] max: 10029.00 [4.5%] avg: 5627.33 [2.9%] std: 2252.71 runs: 6

Same as with my previous testing Minor faults are more or less within
noise but Major fault count is way bellow the base kernel.

While this looks as a nice win it is fair to say that 0-limit
configuration is quite artificial. So I was playing with 0-no-limit
loads as well.

* TEST 2
========

The following results are from 2 groups configuration on a 16GB machine
(single NUMA node).

- A running stream IO (dd if=/dev/zero of=local.file bs=1024) with
  2*TotalMem with 0 soft limit.
- B running a mem_eater which consumes TotalMem-1G without any limit. The
  mem_eater consumes the memory in 100 chunks with 1s nap after each
  mmap+poppulate so that both loads have chance to fight for the memory.

The expected result is that B shouldn't be reclaimed and A shouldn't see
a big dropdown in elapsed time.

User
base: min: 2.68 max: 2.89 avg: 2.76 std: 0.09 runs: 3
rework: min: 3.27 [122.0%] max: 3.74 [129.4%] avg: 3.44 [124.6%] std: 0.21 runs: 3
System
base: min: 86.26 max: 88.29 avg: 87.28 std: 0.83 runs: 3
rework: min: 81.05 [94.0%] max: 84.96 [96.2%] avg: 83.14 [95.3%] std: 1.61 runs: 3
Elapsed
base: min: 317.28 max: 332.39 avg: 325.84 std: 6.33 runs: 3
rework: min: 281.53 [88.7%] max: 298.16 [89.7%] avg: 290.99 [89.3%] std: 6.98 runs: 3

System time improved slightly as well as Elapsed. My previous testing
has shown worse numbers but this again seem to depend on the storage
speed.

My theory is that the writeback doesn't catch up and prio-0 soft reclaim
falls into wait on writeback page too often in the base kernel. The
patched kernel doesn't do that because the soft reclaim is done from the
kswapd/direct reclaim context. This can be seen on the following graph
nicely. The A's group usage_in_bytes regurarly drops really low very often.

All 3 runs
http://labs.suse.cz/mhocko/soft_limit_rework/stream_io-vs-mem_eater/stream.png
resp. a detail of the single run
http://labs.suse.cz/mhocko/soft_limit_rework/stream_io-vs-mem_eater/stream-one-run.png

mem_eater seems to be doing better as well. It gets to the full
allocation size faster as can be seen on the following graph:
http://labs.suse.cz/mhocko/soft_limit_rework/stream_io-vs-mem_eater/mem_eater-one-run.png

/proc/meminfo collected during the test also shows that rework kernel
hasn't swapped that much (well almost not at all):
base: max: 123900 K avg: 56388.29 K
rework: max: 300 K avg: 128.68 K

kswapd and direct reclaim statistics are of no use unfortunatelly because
soft reclaim is not accounted properly as the counters are hidden by
global_reclaim() checks in the base kernel.

* TEST 3
========

Another test was the same configuration as TEST2 except the stream IO was
replaced by a single kbuild (16 parallel jobs bound to Node0 cpus same as
in TEST1) and mem_eater allocated TotalMem-200M so kbuild had only 200MB
left.

Kbuild did better with the rework kernel here as well:
User
base: min: 860.28 max: 872.86 avg: 868.03 std: 5.54 runs: 3
rework: min: 880.81 [102.4%] max: 887.45 [101.7%] avg: 883.56 [101.8%] std: 2.83 runs: 3
System
base: min: 84.35 max: 85.06 avg: 84.79 std: 0.31 runs: 3
rework: min: 85.62 [101.5%] max: 86.09 [101.2%] avg: 85.79 [101.2%] std: 0.21 runs: 3
Elapsed
base: min: 135.36 max: 243.30 avg: 182.47 std: 45.12 runs: 3
rework: min: 110.46 [81.6%] max: 116.20 [47.8%] avg: 114.15 [62.6%] std: 2.61 runs: 3
Minor
base: min: 36635476.00 max: 36673365.00 avg: 36654812.00 std: 15478.03 runs: 3
rework: min: 36639301.00 [100.0%] max: 36695541.00 [100.1%] avg: 36665511.00 [100.0%] std: 23118.23 runs: 3
Major
base: min: 14708.00 max: 53328.00 avg: 31379.00 std: 16202.24 runs: 3
rework: min: 302.00 [2.1%] max: 414.00 [0.8%] avg: 366.33 [1.2%] std: 47.22 runs: 3

Again we can see a significant improvement in Elapsed (it also seems to
be more stable), there is a huge dropdown for the Major page faults and
much more swapping:
base: max: 583736 K avg: 112547.43 K
rework: max: 4012 K avg: 124.36 K

Graphs from all three runs show the variability of the kbuild quite
nicely.  It even seems that it took longer after every run with the base
kernel which would be quite surprising as the source tree for the build is
removed and caches are dropped after each run so the build operates on a
freshly extracted sources everytime.
http://labs.suse.cz/mhocko/soft_limit_rework/stream_io-vs-mem_eater/kbuild-mem_eater.png

My other testing shows that this is just a matter of timing and other runs
behave differently the std for Elapsed time is similar ~50.  Example of
other three runs:
http://labs.suse.cz/mhocko/soft_limit_rework/stream_io-vs-mem_eater/kbuild-mem_eater2.png

So to wrap this up.  The series is still doing good and improves the soft
limit.

The testing results for bunch of cgroups with both stream IO and kbuild
loads can be found in "memcg: track children in soft limit excess to
improve soft limit".

This patch:

Memcg soft reclaim has been traditionally triggered from the global
reclaim paths before calling shrink_zone.  mem_cgroup_soft_limit_reclaim
then picked up a group which exceeds the soft limit the most and reclaimed
it with 0 priority to reclaim at least SWAP_CLUSTER_MAX pages.

The infrastructure requires per-node-zone trees which hold over-limit
groups and keep them up-to-date (via memcg_check_events) which is not cost
free.  Although this overhead hasn't turned out to be a bottle neck the
implementation is suboptimal because mem_cgroup_update_tree has no idea
which zones consumed memory over the limit so we could easily end up
having a group on a node-zone tree having only few pages from that
node-zone.

This patch doesn't try to fix node-zone trees management because it seems
that integrating soft reclaim into zone shrinking sounds much easier and
more appropriate for several reasons.  First of all 0 priority reclaim was
a crude hack which might lead to big stalls if the group's LRUs are big
and hard to reclaim (e.g.  a lot of dirty/writeback pages).  Soft reclaim
should be applicable also to the targeted reclaim which is awkward right
now without additional hacks.  Last but not least the whole infrastructure
eats quite some code.

After this patch shrink_zone is done in 2 passes.  First it tries to do
the soft reclaim if appropriate (only for global reclaim for now to keep
compatible with the original state) and fall back to ignoring soft limit
if no group is eligible to soft reclaim or nothing has been scanned during
the first pass.  Only groups which are over their soft limit or any of
their parents up the hierarchy is over the limit are considered eligible
during the first pass.

Soft limit tree which is not necessary anymore will be removed in the
follow up patch to make this patch smaller and easier to review.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Glauber Costa <glommer@openvz.org>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ying Han <yinghan@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Glauber Costa <glommer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-12 15:38:00 -07:00
Linus Torvalds 26935fb06e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 
Pull vfs pile 4 from Al Viro:
 "list_lru pile, mostly"

This came out of Andrew's pile, Al ended up doing the merge work so that
Andrew didn't have to.

Additionally, a few fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (42 commits)
  super: fix for destroy lrus
  list_lru: dynamically adjust node arrays
  shrinker: Kill old ->shrink API.
  shrinker: convert remaining shrinkers to count/scan API
  staging/lustre/libcfs: cleanup linux-mem.h
  staging/lustre/ptlrpc: convert to new shrinker API
  staging/lustre/obdclass: convert lu_object shrinker to count/scan API
  staging/lustre/ldlm: convert to shrinkers to count/scan API
  hugepage: convert huge zero page shrinker to new shrinker API
  i915: bail out earlier when shrinker cannot acquire mutex
  drivers: convert shrinkers to new count/scan API
  fs: convert fs shrinkers to new scan/count API
  xfs: fix dquot isolation hang
  xfs-convert-dquot-cache-lru-to-list_lru-fix
  xfs: convert dquot cache lru to list_lru
  xfs: rework buffer dispose list tracking
  xfs-convert-buftarg-lru-to-generic-code-fix
  xfs: convert buftarg LRU to generic code
  fs: convert inode and dentry shrinking to be node aware
  vmscan: per-node deferred work
  ...
 2013-09-12 15:01:38 -07:00
Linus Torvalds 5223161dc0 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds 
Pull led updates from Bryan Wu:
 "Sorry for the late pull request, since I'm just back from vacation.

  LED subsystem updates for 3.12:
   - pca9633 driver DT supporting and pca9634 chip supporting
   - restore legacy device attributes for lp5521
   - other fixing and updates"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (28 commits)
  leds: wm831x-status: Request a REG resource
  leds: trigger: ledtrig-backlight: Fix invalid memory access in fb_event notification callback
  leds-pca963x: Fix device tree parsing
  leds-pca9633: Rename to leds-pca963x
  leds-pca9633: Add mutex to the ledout register
  leds-pca9633: Unique naming of the LEDs
  leds-pca9633: Add support for PCA9634
  leds: lp5562: use LP55xx common macros for device attributes
  Documentation: leds-lp5521,lp5523: update device attribute information
  leds: lp5523: remove unnecessary writing commands
  leds: lp5523: restore legacy device attributes
  leds: lp5523: LED MUX configuration on initializing
  leds: lp5523: make separate API for loading engine
  leds: lp5521: remove unnecessary writing commands
  leds: lp5521: restore legacy device attributes
  leds: lp55xx: add common macros for device attributes
  leds: lp55xx: add common data structure for program
  Documentation: leds: Fix a typo
  leds: ss4200: Fix incorrect placement of __initdata
  leds: clevo-mail: Fix incorrect placement of __initdata
  ...
 2013-09-12 11:35:33 -07:00
Linus Torvalds e5d0c87439 IOMMU Updates for Linux v3.12 
This round the updates contain:
 
 	* A new driver for the Freescale PAMU IOMMU from Varun Sethi.
 	  This driver has cooked for a while and required changes to the
 	  IOMMU-API and infrastructure that were already merged before.
 	* Updates for the ARM-SMMU driver from Will Deacon
 	* Various fixes, the most important one is probably a fix from
 	  Alex Williamson for a memory leak in the VT-d page-table
 	  freeing code
 
 In summary not all that much. The biggest part in the diffstat is the
 new PAMU driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSMdWFAAoJECvwRC2XARrjZbkP/3lYpEjd1SmqZAVUTPQw/H1Y
 9DHFs39WZddlz73YkF2yDyprjdi2b8wUzOJGr0BJ0AWb97l3bcvouqRaw0Q8Sghc
 sHYHHF/L/n6xkDVd8OXTGgQukjOu16yb1Ai1jlvlNgrB8T9lA0QKjSIDfVVJb99c
 qGnO58UqnxOC7zzL5iqDfkgffre+dw4Ik2BddN6+gdPV907wsk7ze5nTDNTMkXso
 oGi7jwbOTkuWyI6ST1GnkSV9bB1yUPR0Np0sFSOtGbsRSDOA4Ta96AHygZ3kPza+
 ErylGBlHj0KG7oH7m3GOQAso6MeNdHa+7aIewaLz2NKundhPA6Kb3hFdghjGGPzR
 ubJ3IiG7X/MPrp8iwNsPDoCaRkWWGR80L9vIlhD+yvfCx8PkkEUoEIbf1k4Gm0Ry
 5ouROU77Ha2P6ZuGvPCTlok4ggKkV2mHdUuetC/04ETvA3kN+2TGjya/1wL+X+H/
 fV3jyBRYWFaXNzKl3qKfol2ETG3hQA5NGNKuHMTJz8CF8jHSJeijDCeiWv363h62
 oQ+CrUG7FJ4B9ZITGDzxA0MdFs5TIqRRp2vY8onaok5YAR3U/iiKRRv+YjIjZuE4
 CTshhbb/mwwaTKvq8pq9xs/3rhGX+3HSP4jAzNWUJPYgouE+rvHq/H1ApI89IxJF
 1wYemwLPo3fMcgOvw8pm
 =UZoD
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU Updates from Joerg Roedel:
 "This round the updates contain:

   - A new driver for the Freescale PAMU IOMMU from Varun Sethi.

     This driver has cooked for a while and required changes to the
     IOMMU-API and infrastructure that were already merged before.

   - Updates for the ARM-SMMU driver from Will Deacon

   - Various fixes, the most important one is probably a fix from Alex
     Williamson for a memory leak in the VT-d page-table freeing code

  In summary not all that much.  The biggest part in the diffstat is the
  new PAMU driver"

* tag 'iommu-updates-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  intel-iommu: Fix leaks in pagetable freeing
  iommu/amd: Fix resource leak in iommu_init_device()
  iommu/amd: Clean up unnecessary MSI/MSI-X capability find
  iommu/arm-smmu: Simplify VMID and ASID allocation
  iommu/arm-smmu: Don't use VMIDs for stage-1 translations
  iommu/arm-smmu: Tighten up global fault reporting
  iommu/arm-smmu: Remove broken big-endian check
  iommu/fsl: Remove unnecessary 'fsl-pamu' prefixes
  iommu/fsl: Fix whitespace problems noticed by git-am
  iommu/fsl: Freescale PAMU driver and iommu implementation.
  iommu/fsl: Add additional iommu attributes required by the PAMU driver.
  powerpc: Add iommu domain pointer to device archdata
  iommu/exynos: Remove dead code (set_prefbuf)
 2013-09-12 11:29:26 -07:00
Linus Torvalds 02b9735c12 ACPI and power management fixes for 3.12-rc1 
1) ACPI-based PCI hotplug (ACPIPHP) fixes related to spurious events
 
   After the recent ACPIPHP changes we've seen some interesting breakage
   on a system that triggers device check notifications during boot for
   non-existing devices.  Although those notifications are really
   spurious, we should be able to deal with them nevertheless and that
   shouldn't introduce too much overhead.  Four commits to make that
   work properly.
 
  2) Memory hotplug and hibernation mutual exclusion rework
 
   This was maent to be a cleanup, but it happens to fix a classical
   ABBA deadlock between system suspend/hibernation and ACPI memory
   hotplug which is possible if they are started roughly at the same
   time.  Three commits rework memory hotplug so that it doesn't
   acquire pm_mutex and make hibernation use device_hotplug_lock
   which prevents it from racing with memory hotplug.
 
  3) ACPI Intel LPSS (Low-Power Subsystem) driver crash fix
 
   The ACPI LPSS driver crashes during boot on Apple Macbook Air with
   Haswell that has slightly unusual BIOS configuration in which one
   of the LPSS device's _CRS method doesn't return all of the information
   expected by the driver.  Fix from Mika Westerberg, for stable.
 
  4) ACPICA fix related to Store->ArgX operation
 
   AML interpreter fix for obscure breakage that causes AML to be
   executed incorrectly on some machines (observed in practice).  From
   Bob Moore.
 
  5) ACPI core fix for PCI ACPI device objects lookup
 
   There still are cases in which there is more than one ACPI device
   object matching a given PCI device and we don't choose the one that
   the BIOS expects us to choose, so this makes the lookup take more
   criteria into account in those cases.
 
  6) Fix to prevent cpuidle from crashing in some rare cases
 
   If the result of cpuidle_get_driver() is NULL, which can happen on
   some systems, cpuidle_driver_ref() will crash trying to use that
   pointer and the Daniel Fu's fix prevents that from happening.
 
  7) cpufreq fixes related to CPU hotplug
 
   Stephen Boyd reported a number of concurrency problems with cpufreq
   related to CPU hotplug which are addressed by a series of fixes
   from Srivatsa S Bhat and Viresh Kumar.
 
  8) cpufreq fix for time conversion in time_in_state attribute
 
   Time conversion carried out by cpufreq when user space attempts to
   read /sys/devices/system/cpu/cpu*/cpufreq/stats/time_in_state won't
   work correcty if cputime_t doesn't map directly to jiffies.  Fix
   from Andreas Schwab.
 
  9) Revert of a troublesome cpufreq commit
 
   Commit 7c30ed5 (cpufreq: make sure frequency transitions are
   serialized) was intended to address some known concurrency problems
   in cpufreq related to the ordering of transitions, but unfortunately
   it introduced several problems of its own, so I decided to revert it
   now and address the original problems later in a more robust way.
 
 10) Intel Haswell CPU models for intel_pstate from Nell Hardcastle.
 
 11) cpufreq fixes related to system suspend/resume
 
   The recent cpufreq changes that made it preserve CPU sysfs attributes
   over suspend/resume cycles introduced a possible NULL pointer
   dereference that caused it to crash during the second attempt to
   suspend.  Three commits from Srivatsa S Bhat fix that problem and a
   couple of related issues.
 
 12) cpufreq locking fix
 
   cpufreq_policy_restore() should acquire the lock for reading, but
   it acquires it for writing.  Fix from Lan Tianyu.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSMbdRAAoJEKhOf7ml8uNsiFkQAKSh1iBXuiUCxBApEGZgoQio
 8lmnuyWdhNQWdjZTnh7ptjpDxdrWhxcoxvoaGABU++reDObjef1QnyrQtdO3r8dl
 oy0C/YGh5kq5SIffIDEwPIb/ipDe/47cgRMW8iBlnViDa1MJBqICuLyefcTRIrKp
 QGvv0owUM2o7TXpA10+qm8zXjv6m5mu1DTtxYI+2Eodhwi54neAqb+aKMspa2thy
 V9KFcVv3Td4rJrNvw6BhXNM81QbaYpRxaK3DRr1T6SM++EKvbqYFA1jgW24YvqTL
 nrCZlDMb6KRww5DCxA/ns9Kx5H+ZyicoRwdtAM3PBYA6MGqsLqPozC/8VKV1fSvZ
 sgUdbUSuLqKRAkOqM1bjKAhi9PdCGBvkQAg2AqbRK6IBl4HJC8xhdb5E6eZ/J42G
 GyNBpKef7wVJwYKXE2hSChZ5dYjqMizNHWxFHf8Xy1dveExbQ2nmSJmaWMy2A3kx
 YOXFkcTV5F6GOIZB8WCRruzUalff9xal4G+iVhGF+AZIOCm7bC+FDXfwIS82uVor
 ej2l+uQLLZCB499IRmM6942ZIAXshmtN7eRfGtKBc6jsbSCEdQDqf1Z7oRwqAD6h
 WkD/k/zz30CyM8y4snOkAXkZgqAQsZodtqfowE3e9OHd51tfcNiqdht+obwCx+eD
 MWXc2xATMAX6NcZTXSZS
 =U/Jw
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-fixes-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management fixes from Rafael Wysocki:
 "All of these commits are fixes that have emerged recently and some of
  them fix bugs introduced during this merge window.

  Specifics:

   1) ACPI-based PCI hotplug (ACPIPHP) fixes related to spurious events

      After the recent ACPIPHP changes we've seen some interesting
      breakage on a system that triggers device check notifications
      during boot for non-existing devices.  Although those
      notifications are really spurious, we should be able to deal with
      them nevertheless and that shouldn't introduce too much overhead.
      Four commits to make that work properly.

   2) Memory hotplug and hibernation mutual exclusion rework

      This was maent to be a cleanup, but it happens to fix a classical
      ABBA deadlock between system suspend/hibernation and ACPI memory
      hotplug which is possible if they are started roughly at the same
      time.  Three commits rework memory hotplug so that it doesn't
      acquire pm_mutex and make hibernation use device_hotplug_lock
      which prevents it from racing with memory hotplug.

   3) ACPI Intel LPSS (Low-Power Subsystem) driver crash fix

      The ACPI LPSS driver crashes during boot on Apple Macbook Air with
      Haswell that has slightly unusual BIOS configuration in which one
      of the LPSS device's _CRS method doesn't return all of the
      information expected by the driver.  Fix from Mika Westerberg, for
      stable.

   4) ACPICA fix related to Store->ArgX operation

      AML interpreter fix for obscure breakage that causes AML to be
      executed incorrectly on some machines (observed in practice).
      From Bob Moore.

   5) ACPI core fix for PCI ACPI device objects lookup

      There still are cases in which there is more than one ACPI device
      object matching a given PCI device and we don't choose the one
      that the BIOS expects us to choose, so this makes the lookup take
      more criteria into account in those cases.

   6) Fix to prevent cpuidle from crashing in some rare cases

      If the result of cpuidle_get_driver() is NULL, which can happen on
      some systems, cpuidle_driver_ref() will crash trying to use that
      pointer and the Daniel Fu's fix prevents that from happening.

   7) cpufreq fixes related to CPU hotplug

      Stephen Boyd reported a number of concurrency problems with
      cpufreq related to CPU hotplug which are addressed by a series of
      fixes from Srivatsa S Bhat and Viresh Kumar.

   8) cpufreq fix for time conversion in time_in_state attribute

      Time conversion carried out by cpufreq when user space attempts to
      read /sys/devices/system/cpu/cpu*/cpufreq/stats/time_in_state
      won't work correcty if cputime_t doesn't map directly to jiffies.
      Fix from Andreas Schwab.

   9) Revert of a troublesome cpufreq commit

      Commit 7c30ed5 (cpufreq: make sure frequency transitions are
      serialized) was intended to address some known concurrency
      problems in cpufreq related to the ordering of transitions, but
      unfortunately it introduced several problems of its own, so I
      decided to revert it now and address the original problems later
      in a more robust way.

  10) Intel Haswell CPU models for intel_pstate from Nell Hardcastle.

  11) cpufreq fixes related to system suspend/resume

      The recent cpufreq changes that made it preserve CPU sysfs
      attributes over suspend/resume cycles introduced a possible NULL
      pointer dereference that caused it to crash during the second
      attempt to suspend.  Three commits from Srivatsa S Bhat fix that
      problem and a couple of related issues.

  12) cpufreq locking fix

      cpufreq_policy_restore() should acquire the lock for reading, but
      it acquires it for writing.  Fix from Lan Tianyu"

* tag 'pm+acpi-fixes-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
  cpufreq: Acquire the lock in cpufreq_policy_restore() for reading
  cpufreq: Prevent problems in update_policy_cpu() if last_cpu == new_cpu
  cpufreq: Restructure if/else block to avoid unintended behavior
  cpufreq: Fix crash in cpufreq-stats during suspend/resume
  intel_pstate: Add Haswell CPU models
  Revert "cpufreq: make sure frequency transitions are serialized"
  cpufreq: Use signed type for 'ret' variable, to store negative error values
  cpufreq: Remove temporary fix for race between CPU hotplug and sysfs-writes
  cpufreq: Synchronize the cpufreq store_*() routines with CPU hotplug
  cpufreq: Invoke __cpufreq_remove_dev_finish() after releasing cpu_hotplug.lock
  cpufreq: Split __cpufreq_remove_dev() into two parts
  cpufreq: Fix wrong time unit conversion
  cpufreq: serialize calls to __cpufreq_governor()
  cpufreq: don't allow governor limits to be changed when it is disabled
  ACPI / bind: Prefer device objects with _STA to those without it
  ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checks
  ACPI / hotplug / PCI: Use _OST to notify firmware about notify status
  ACPI / hotplug / PCI: Avoid doing too much for spurious notifies
  ACPICA: Fix for a Store->ArgX when ArgX contains a reference to a field.
  ACPI / hotplug / PCI: Don't trim devices before scanning the namespace
  ...
 2013-09-12 11:22:45 -07:00
Linus Torvalds 5762482f54 vfs: move get_fs_root_and_pwd() to single caller 
Let's not pollute the include files with inline functions that are only
used in a single place.  Especially not if we decide we might want to
change the semantics of said function to make it more efficient..

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-12 10:12:47 -07:00
Linus Torvalds b7c09ad401 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs 
Pull btrfs updates from Chris Mason:
 "This is against 3.11-rc7, but was pulled and tested against your tree
  as of yesterday.  We do have two small incrementals queued up, but I
  wanted to get this bunch out the door before I hop on an airplane.

  This is a fairly large batch of fixes, performance improvements, and
  cleanups from the usual Btrfs suspects.

  We've included Stefan Behren's work to index subvolume UUIDs, which is
  targeted at speeding up send/receive with many subvolumes or snapshots
  in place.  It closes a long standing performance issue that was built
  in to the disk format.

  Mark Fasheh's offline dedup work is also here.  In this case offline
  means the FS is mounted and active, but the dedup work is not done
  inline during file IO.  This is a building block where utilities are
  able to ask the FS to dedup a series of extents.  The kernel takes
  care of verifying the data involved really is the same.  Today this
  involves reading both extents, but we'll continue to evolve the
  patches"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (118 commits)
  Btrfs: optimize key searches in btrfs_search_slot
  Btrfs: don't use an async starter for most of our workers
  Btrfs: only update disk_i_size as we remove extents
  Btrfs: fix deadlock in uuid scan kthread
  Btrfs: stop refusing the relocation of chunk 0
  Btrfs: fix memory leak of uuid_root in free_fs_info
  btrfs: reuse kbasename helper
  btrfs: return btrfs error code for dev excl ops err
  Btrfs: allow partial ordered extent completion
  Btrfs: convert all bug_ons in free-space-cache.c
  Btrfs: add support for asserts
  Btrfs: adjust the fs_devices->missing count on unmount
  Btrf: cleanup: don't check for root_refs == 0 twice
  Btrfs: fix for patch "cleanup: don't check the same thing twice"
  Btrfs: get rid of one BUG() in write_all_supers()
  Btrfs: allocate prelim_ref with a slab allocater
  Btrfs: pass gfp_t to __add_prelim_ref() to avoid always using GFP_ATOMIC
  Btrfs: fix race conditions in BTRFS_IOC_FS_INFO ioctl
  Btrfs: fix race between removing a dev and writing sbs
  Btrfs: remove ourselves from the cluster list under lock
  ...
 2013-09-12 09:58:51 -07:00
Waiman Long 1370e97bb2 seqlock: Add a new locking reader type 
The sequence lock (seqlock) was originally designed for the cases where
the readers do not need to block the writers by making the readers retry
the read operation when the data change.

Since then, the use cases have been expanded to include situations where
a thread does not need to change the data (effectively a reader) at all
but have to take the writer lock because it can't tolerate changes to
the protected structure.  Some examples are the d_path() function and
the getcwd() syscall in fs/dcache.c where the functions take the writer
lock on rename_lock even though they don't need to change anything in
the protected data structure at all.  This is inefficient as a reader is
now blocking other sequence number reading readers from moving forward
by pretending to be a writer.

This patch tries to eliminate this inefficiency by introducing a new
type of locking reader to the seqlock locking mechanism.  This new
locking reader will try to take an exclusive lock preventing other
writers and locking readers from going forward.  However, it won't
affect the progress of the other sequence number reading readers as the
sequence number won't be changed.

Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-12 09:25:23 -07:00
Linus Torvalds decf7abcc9 sound fixes for 3.12-rc1 
A few last-minute fixes for 3.12-rc1.  All patches are driver specific.
 
 - HD-audio fixes: MacBook 6,1/6,2 speaker fix, ASUS TX300 dock speaker
   fix, Toshiba Satellite irq fix, Haswell HDMI audio cleanups)
 
 - ASoC fixes: atmel irq fix, fsl DT fix, mc13783 spi fix, kirkwood
   compatible string change, etc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJSMWJeAAoJEGwxgFQ9KSmkkLsP/RMeleT18hbZEhdSZsJaqErg
 p6Dk59fb28HrQrY/ECcZnBChGFgCagS316lBjuEkDtQmZdhYtIDHV9r/udV4MbFc
 rX4IVNv1JerpCyZu4pC0yngHiEX3NMBmu204RJBC8vzJt3fupTFIioliNQlmMuiR
 k6Kb9kGmNHLtA7LwshHwNs8JwXEJHUcnsBGdPB0BUy8BpZ8FVTIOvuBixpxv9kXm
 +n80KRhY/YBjpU+bTvGTgJhH7U3BXylU20q5cO2ukv8vW79LGNZ0XA5Rnerrlr/F
 fvDzg+liOEV8ijchfS9rhs28J+4ICHmFkY/rj7QFpVpP9xYfpqhvw93KmIACirDX
 DlJt63fOJuHbGEv5cGjAmdZXcKONoD9fG11CKDj46Fm4borNy7DdfmMLxNM3xo5q
 rxbgUWplCDHFRALXATJ3t8Occz71l2W+GjklmI7td8K5SD6JCzSI1GdR4YVVf76B
 Wd6AM3wpIGKdjCwZvT5jDBb/4O8ZMtOqEhxvBKI1eO4l+A3UbqWlBKyncfvpKBqY
 yHTBIOgF5QdtUMVSI0/hb64nzmOGHLAWxQoCZssvSFEV6P+jodrqGGayxvbM+6rU
 YR2w2omh+6UkacQvjyVWGehBHiYCECfl0kk9XmPVkIGgHmOdgvkv1/MMbPeEcoXv
 z2YGcgbOIBpNrLcgTev4
 =fKdg
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A few last-minute fixes for 3.12-rc1.  All patches are driver
  specific.

   - HD-audio fixes: MacBook 6,1/6,2 speaker fix, ASUS TX300 dock
     speaker fix, Toshiba Satellite irq fix, Haswell HDMI audio
     cleanups)

   - ASoC fixes: atmel irq fix, fsl DT fix, mc13783 spi fix, kirkwood
     compatible string change, etc"

* tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: mc13783: add spi errata fix
  ASoC: rsnd: fixup flag name of rsnd_scu_platform_info
  ALSA: hda - Add CS4208 codec support for MacBook 6,1 and 6,2
  ALSA: hda - Add Toshiba Satellite C870 to MSI blacklist
  ASoC: fsl_spdif: Select regmap-mmio
  ALSA: hda - unmute pin amplifier in infoframe setup for Haswell
  ALSA: hda - define is_haswell() to check if a display audio codec is Haswell
  ALSA: hda - Add dock speaker support for ASUS TX300
  ASoC: kirkwood: change the compatible string of the kirkwood-i2s driver
  ASoC: atmel: disable error interrupt
  ASoC: fsl: imx-audmux: Do not call imx_audmux_parse_dt_defaults() on non-dt kernel
 2013-09-12 08:52:41 -07:00
Joerg Roedel d6a60fc1a8 Merge branches 'arm/exynos', 'ppc/pamu', 'arm/smmu', 'x86/amd' and 'iommu/fixes' into next 2013-09-12 16:46:34 +02:00
Linus Torvalds b9b42eeb88 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux 
Pull thermal management updates from Zhang Rui:
 "We have a lot of SOC changes and a few thermal core fixes this time.

  The biggest change is about exynos thermal driver restructure.  The
  patch set adds TMU (Thermal management Unit) driver support for
  exynos5440 platform.  There are 3 instances of the TMU controllers so
  necessary cleanup/re-structure is done to handle multiple thermal
  zone.

  The next biggest change is the introduction of the imx thermal driver.
  It adds the imx thermal support using Temperature Monitor (TEMPMON)
  block found on some Freescale i.MX SoCs.  The driver uses syscon
  regmap interface to access TEMPMON control registers and calibration
  data, and supports cpufreq as the cooling device.

  Highlights:

   - restructure exynos thermal driver.

   - introduce new imx thermal driver.

   - fix a bug in thermal core, which powers on the fans unexpectedly
     after resume from suspend"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (46 commits)
  drivers: thermal: add check when unregistering cpu cooling
  thermal: thermal_core: allow binding with limits on bind_params
  drivers: thermal: make usage of CONFIG_THERMAL_HWMON optional
  drivers: thermal: parent virtual hwmon with thermal zone
  thermal: hwmon: move hwmon support to single file
  thermal: exynos: Clean up non-DT remnants
  thermal: exynos: Fix potential NULL pointer dereference
  thermal: exynos: Fix typos in Kconfig
  thermal: ti-soc-thermal: Ensure to compute thermal trend
  thermal: ti-soc-thermal: Set the bandgap mask counter delay value
  thermal: ti-soc-thermal: Initialize counter_delay field for TI DRA752 sensors
  thermal: step_wise: return instance->target by default
  thermal: step_wise: cdev only needs update on a new target state
  Thermal/cpu_cooling: Return directly for the cpu out of allowed_cpus in the cpufreq_thermal_notifier()
  thermal: exynos_tmu: fix wrong error check for mapped memory
  thermal: imx: implement thermal alarm interrupt handling
  thermal: imx: dynamic passive and SoC specific critical trip points
  Documentation: thermal: Explain the exynos thermal driver model
  ARM: dts: thermal: exynos: Add documentation for Exynos SoC thermal bindings
  thermal: exynos: Support for TMU regulator defined at device tree
  ...
 2013-09-12 07:42:59 -07:00
Linus Torvalds 7b7a2f0a31 Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6 
Pull CIFS fixes from Steve French:
 "CIFS update including case insensitive file name matching improvements
  for UTF-8 to Unicode, various small cifs fixes, SMB2/SMB3 leasing
  improvements, support for following SMB2 symlinks, SMB3 packet signing
  improvements"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (25 commits)
  CIFS: Respect epoch value from create lease context v2
  CIFS: Add create lease v2 context for SMB3
  CIFS: Move parsing lease buffer to ops struct
  CIFS: Move creating lease buffer to ops struct
  CIFS: Store lease state itself rather than a mapped oplock value
  CIFS: Replace clientCanCache* bools with an integer
  [CIFS] quiet sparse compile warning
  cifs: Start using per session key for smb2/3 for signature generation
  cifs: Add a variable specific to NTLMSSP for key exchange.
  cifs: Process post session setup code in respective dialect functions.
  CIFS: convert to use le32_add_cpu()
  CIFS: Fix missing lease break
  CIFS: Fix a memory leak when a lease break comes
  cifs: add winucase_convert.pl to Documentation/ directory
  cifs: convert case-insensitive dentry ops to use new case conversion routines
  cifs: add new case-insensitive conversion routines that are based on wchar_t's
  [CIFS] Add Scott to list of cifs contributors
  cifs: Move and expand MAX_SERVER_SIZE definition
  cifs: Expand max share name length to 256
  cifs: Move string length definitions to uapi
  ...
 2013-09-12 07:41:12 -07:00
John Stultz 7bd3601446 timekeeping: Fix HRTICK related deadlock from ntp lock changes 
Gerlando Falauto reported that when HRTICK is enabled, it is
possible to trigger system deadlocks. These were hard to
reproduce, as HRTICK has been broken in the past, but seemed
to be connected to the timekeeping_seq lock.

Since seqlock/seqcount's aren't supported w/ lockdep, I added
some extra spinlock based locking and triggered the following
lockdep output:

[   15.849182] ntpd/4062 is trying to acquire lock:
[   15.849765]  (&(&pool->lock)->rlock){..-...}, at: [<ffffffff810aa9b5>] __queue_work+0x145/0x480
[   15.850051]
[   15.850051] but task is already holding lock:
[   15.850051]  (timekeeper_lock){-.-.-.}, at: [<ffffffff810df6df>] do_adjtimex+0x7f/0x100

<snip>

[   15.850051] Chain exists of: &(&pool->lock)->rlock --> &p->pi_lock --> timekeeper_lock
[   15.850051]  Possible unsafe locking scenario:
[   15.850051]
[   15.850051]        CPU0                    CPU1
[   15.850051]        ----                    ----
[   15.850051]   lock(timekeeper_lock);
[   15.850051]                                lock(&p->pi_lock);
[   15.850051] lock(timekeeper_lock);
[   15.850051] lock(&(&pool->lock)->rlock);
[   15.850051]
[   15.850051]  *** DEADLOCK ***

The deadlock was introduced by 06c017fdd4 ("timekeeping:
Hold timekeepering locks in do_adjtimex and hardpps") in 3.10

This patch avoids this deadlock, by moving the call to
schedule_delayed_work() outside of the timekeeper lock
critical section.

Reported-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Tested-by: Lin Ming <minggr@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable <stable@vger.kernel.org> #3.11, 3.10
Link: http://lkml.kernel.org/r/1378943457-27314-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2013-09-12 07:49:51 +02:00
Linus Torvalds c2d95729e3 Merge branch 'akpm' (patches from Andrew Morton) 
Merge first patch-bomb from Andrew Morton:
 - Some pidns/fork/exec tweaks
 - OCFS2 updates
 - Most of MM - there remain quite a few memcg parts which depend on
   pending core cgroups changes.  Which might have been already merged -
   I'll check tomorrow...
 - Various misc stuff all over the place
 - A few block bits which I never got around to sending to Jens -
   relatively minor things.
 - MAINTAINERS maintenance
 - A small number of lib/ updates
 - checkpatch updates
 - epoll
 - firmware/dmi-scan
 - Some kprobes work for S390
 - drivers/rtc updates
 - hfsplus feature work
 - vmcore feature work
 - rbtree upgrades
 - AOE updates
 - pktcdvd cleanups
 - PPS
 - memstick
 - w1
 - New "inittmpfs" feature, which does the obvious
 - More IPC work from Davidlohr.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (303 commits)
  lz4: fix compression/decompression signedness mismatch
  ipc: drop ipc_lock_check
  ipc, shm: drop shm_lock_check
  ipc: drop ipc_lock_by_ptr
  ipc, shm: guard against non-existant vma in shmdt(2)
  ipc: document general ipc locking scheme
  ipc,msg: drop msg_unlock
  ipc: rename ids->rw_mutex
  ipc,shm: shorten critical region for shmat
  ipc,shm: cleanup do_shmat pasta
  ipc,shm: shorten critical region for shmctl
  ipc,shm: make shmctl_nolock lockless
  ipc,shm: introduce shmctl_nolock
  ipc: drop ipcctl_pre_down
  ipc,shm: shorten critical region in shmctl_down
  ipc,shm: introduce lockless functions to obtain the ipc object
  initmpfs: use initramfs if rootfstype= or root= specified
  initmpfs: make rootfs use tmpfs when CONFIG_TMPFS enabled
  initmpfs: move rootfs code from fs/ramfs/ to init/
  initmpfs: move bdi setup from init_rootfs to init_ramfs
  ...
 2013-09-11 16:08:54 -07:00
Sergey Senozhatsky b34081f1cd lz4: fix compression/decompression signedness mismatch 
LZ4 compression and decompression functions require different in
signedness input/output parameters: unsigned char for compression and
signed char for decompression.

Change decompression API to require "(const) unsigned char *".

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yann Collet <yann.collet.73@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:59:45 -07:00
Davidlohr Bueso d9a605e40b ipc: rename ids->rw_mutex 
Since in some situations the lock can be shared for readers, we shouldn't
be calling it a mutex, rename it to rwsem.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:59:42 -07:00
Rob Landley 57f150a58c initmpfs: move rootfs code from fs/ramfs/ to init/ 
When the rootfs code was a wrapper around ramfs, having them in the same
file made sense.  Now that it can wrap another filesystem type, move it in
with the init code instead.

This also allows a subsequent patch to access rootfstype= command line
arg.

Signed-off-by: Rob Landley <rob@landley.net>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jim Cromie <jim.cromie@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:59:37 -07:00
Jan Kara 5e4c0d9741 lib/radix-tree.c: make radix_tree_node_alloc() work correctly within interrupt 
With users of radix_tree_preload() run from interrupt (block/blk-ioc.c is
one such possible user), the following race can happen:

radix_tree_preload()
...
radix_tree_insert()
  radix_tree_node_alloc()
    if (rtp->nr) {
      ret = rtp->nodes[rtp->nr - 1];
<interrupt>
...
radix_tree_preload()
...
radix_tree_insert()
  radix_tree_node_alloc()
    if (rtp->nr) {
      ret = rtp->nodes[rtp->nr - 1];

And we give out one radix tree node twice.  That clearly results in radix
tree corruption with different results (usually OOPS) depending on which
two users of radix tree race.

We fix the problem by making radix_tree_node_alloc() always allocate fresh
radix tree nodes when in interrupt.  Using preloading when in interrupt
doesn't make sense since all the allocations have to be atomic anyway and
we cannot steal nodes from process-context users because some users rely
on radix_tree_insert() succeeding after radix_tree_preload().
in_interrupt() check is somewhat ugly but we cannot simply key off passed
gfp_mask as that is acquired from root_gfp_mask() and thus the same for
all preload users.

Another part of the fix is to avoid node preallocation in
radix_tree_preload() when passed gfp_mask doesn't allow waiting.  Again,
preallocation in such case doesn't make sense and when preallocation would
happen in interrupt we could possibly leak some allocated nodes.  However,
some users of radix_tree_preload() require following radix_tree_insert()
to succeed.  To avoid unexpected effects for these users,
radix_tree_preload() only warns if passed gfp mask doesn't allow waiting
and we provide a new function radix_tree_maybe_preload() for those users
which get different gfp mask from different call sites and which are
prepared to handle radix_tree_insert() failure.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:59:36 -07:00
Cody P Schafer 2b52908925 rbtree: add rbtree_postorder_for_each_entry_safe() helper 
Because deletion (of the entire tree) is a relatively common use of the
rbtree_postorder iteration, and because doing it safely means fiddling
with temporary storage, provide a helper to simplify postorder rbtree
iteration.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Reviewed-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:59:20 -07:00
Cody P Schafer 9dee5c5151 rbtree: add postorder iteration functions 
Postorder iteration yields all of a node's children prior to yielding the
node itself, and this particular implementation also avoids examining the
leaf links in a node after that node has been yielded.

In what I expect will be its most common usage, postorder iteration allows
the deletion of every node in an rbtree without modifying the rbtree nodes
(no _requirement_ that they be nulled) while avoiding referencing child
nodes after they have been "deleted" (most commonly, freed).

I have only updated zswap to use this functionality at this point, but
numerous bits of code (most notably in the filesystem drivers) use a hand
rolled postorder iteration that NULLs child links as it traverses the
tree.  Each of those instances could be replaced with this common
implementation.

1 & 2 add rbtree postorder iteration functions.
3 adds testing of the iteration to the rbtree runtime tests
4 allows building the rbtree runtime tests as builtins
5 updates zswap.

This patch:

Add postorder iteration functions for rbtree.  These are useful for safely
freeing an entire rbtree without modifying the tree at all.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Reviewed-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:59:19 -07:00
Michael Holzheu 9cb218131d vmcore: introduce remap_oldmem_pfn_range() 
For zfcpdump we can't map the HSA storage because it is only available via
a read interface.  Therefore, for the new vmcore mmap feature we have
introduce a new mechanism to create mappings on demand.

This patch introduces a new architecture function remap_oldmem_pfn_range()
that should be used to create mappings with remap_pfn_range() for oldmem
areas that can be directly mapped.  For zfcpdump this is everything
besides of the HSA memory.  For the areas that are not mapped by
remap_oldmem_pfn_range() a generic vmcore a new generic vmcore fault
handler mmap_vmcore_fault() is called.

This handler works as follows:

* Get already available or new page from page cache (find_or_create_page)
* Check if /proc/vmcore page is filled with data (PageUptodate)
* If yes:
  Return that page
* If no:
  Fill page using __vmcore_read(), set PageUptodate, and return page

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Willeke <willeke@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:59:10 -07:00
Michael Holzheu be8a8d069e vmcore: introduce ELF header in new memory feature 
For s390 we want to use /proc/vmcore for our SCSI stand-alone dump
(zfcpdump).  We have support where the first HSA_SIZE bytes are saved into
a hypervisor owned memory area (HSA) before the kdump kernel is booted.
When the kdump kernel starts, it is restricted to use only HSA_SIZE bytes.

The advantages of this mechanism are:

 * No crashkernel memory has to be defined in the old kernel.
 * Early boot problems (before kexec_load has been done) can be dumped
 * Non-Linux systems can be dumped.

We modify the s390 copy_oldmem_page() function to read from the HSA memory
if memory below HSA_SIZE bytes is requested.

Since we cannot use the kexec tool to load the kernel in this scenario,
we have to build the ELF header in the 2nd (kdump/new) kernel.

So with the following patch set we would like to introduce the new
function that the ELF header for /proc/vmcore can be created in the 2nd
kernel memory.

The following steps are done during zfcpdump execution:

1.  Production system crashes
2.  User boots a SCSI disk that has been prepared with the zfcpdump tool
3.  Hypervisor saves CPU state of boot CPU and HSA_SIZE bytes of memory into HSA
4.  Boot loader loads kernel into low memory area
5.  Kernel boots and uses only HSA_SIZE bytes of memory
6.  Kernel saves registers of non-boot CPUs
7.  Kernel does memory detection for dump memory map
8.  Kernel creates ELF header for /proc/vmcore
9.  /proc/vmcore uses this header for initialization
10. The zfcpdump user space reads /proc/vmcore to write dump to SCSI disk
    - copy_oldmem_page() copies from HSA for memory below HSA_SIZE
    - copy_oldmem_page() copies from real memory for memory above HSA_SIZE

Currently for s390 we create the ELF core header in the 2nd kernel with a
small trick.  We relocate the addresses in the ELF header in a way that
for the /proc/vmcore code it seems to be in the 1st kernel (old) memory
and the read_from_oldmem() returns the correct data.  This allows the
/proc/vmcore code to use the ELF header in the 2nd kernel.

This patch:

Exchange the old mechanism with the new and much cleaner function call
override feature that now offcially allows to create the ELF core header
in the 2nd kernel.

To use the new feature the following function have to be defined
by the architecture backend code to read from new memory:

 * elfcorehdr_alloc: Allocate ELF header
 * elfcorehdr_free: Free the memory of the ELF header
 * elfcorehdr_read: Read from ELF header
 * elfcorehdr_read_notes: Read from ELF notes

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Willeke <willeke@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:59:10 -07:00
Oleg Nesterov 131b2f9f12 exec: kill "int depth" in search_binary_handler() 
Nobody except search_binary_handler() should touch ->recursion_depth, "int
depth" buys nothing but complicates the code, kill it.

Probably we should also kill "fn" and the !NULL check, ->load_binary
should be always defined.  And it can not go away after read_unlock() or
this code is buggy anyway.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Zach Levis <zml@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:59:04 -07:00
Heiko Carstens af96397de8 kprobes: allow to specify custom allocator for insn caches 
The current two insn slot caches both use module_alloc/module_free to
allocate and free insn slot cache pages.

For s390 this is not sufficient since there is the need to allocate insn
slots that are either within the vmalloc module area or within dma memory.

Therefore add a mechanism which allows to specify an own allocator for an
own insn slot cache.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:58:52 -07:00
Heiko Carstens c802d64a35 kprobes: unify insn caches 
The current kpropes insn caches allocate memory areas for insn slots
with module_alloc().  The assumption is that the kernel image and module
area are both within the same +/- 2GB memory area.

This however is not true for s390 where the kernel image resides within
the first 2GB (DMA memory area), but the module area is far away in the
vmalloc area, usually somewhere close below the 4TB area.

For new pc relative instructions s390 needs insn slots that are within
+/- 2GB of each area.  That way we can patch displacements of
pc-relative instructions within the insn slots just like x86 and
powerpc.

The module area works already with the normal insn slot allocator,
however there is currently no way to get insn slots that are within the
first 2GB on s390 (aka DMA area).

Therefore this patch set modifies the kprobes insn slot cache code in
order to allow to specify a custom allocator for the insn slot cache
pages.  In addition architecure can now have private insn slot caches
withhout the need to modify common code.

Patch 1 unifies and simplifies the current insn and optinsn caches
        implementation. This is a preparation which allows to add more
        insn caches in a simple way.

Patch 2 adds the possibility to specify a custom allocator.

Patch 3 makes s390 use the new insn slot mechanisms and adds support for
        pc-relative instructions with long displacements.

This patch (of 3):

The two insn caches (insn, and optinsn) each have an own mutex and
alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()).

Since there is the need for yet another insn cache which satifies dma
allocations on s390, unify and simplify the current implementation:

- Move the per insn cache mutex into struct kprobe_insn_cache.
- Move the alloc/free functions to kprobe.h so they are simply
  wrappers for the generic __get_insn_slot/__free_insn_slot functions.
  The implementation is done with a DEFINE_INSN_CACHE_OPS() macro
  which provides the alloc/free functions for each cache if needed.
- move the struct kprobe_insn_cache to kprobe.h which allows to generate
  architecture specific insn slot caches outside of the core kprobes
  code.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:58:52 -07:00
Sergei Trofimovich f9597f24c0 syscalls.h: add forward declarations for inplace syscall wrappers 
Unclutter -Wmissing-prototypes warning types (enabled at make W=1)

    linux/include/linux/syscalls.h:190:18: warning: no previous prototype for 'SyS_semctl' [-Wmissing-prototypes]
      asmlinkage long SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \
                      ^
    linux/include/linux/syscalls.h:183:2: note: in expansion of macro '__SYSCALL_DEFINEx'
      __SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
      ^
by adding forward declarations right before definitions.

Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:58:25 -07:00
David Daney bff2dc42bc smp.h: move !SMP version of on_each_cpu() out-of-line 
All of the other non-trivial !SMP versions of functions in smp.h are
out-of-line in up.c.  Move on_each_cpu() there as well.

This allows us to get rid of the #include <linux/irqflags.h>.  The
drawback is that this makes both the x86_64 and i386 defconfig !SMP
kernels about 200 bytes larger each.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:58:25 -07:00
David Daney fa688207c9 smp: quit unconditionally enabling irq in on_each_cpu_mask and on_each_cpu_cond 
As in commit f21afc25f9 ("smp.h: Use local_irq_{save,restore}() in
!SMP version of on_each_cpu()"), we don't want to enable irqs if they
are not already enabled.  There are currently no known problematical
callers of these functions, but since it is a known failure pattern, we
preemptively fix them.

Since they are not trivial functions, make them non-inline by moving
them to up.c.  This also makes it so we don't have to fix #include
dependancies for preempt_{disable,enable}.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:58:23 -07:00
Wanpeng Li f9121153fd mm/hwpoison: don't need to hold compound lock for hugetlbfs page 
compound lock is introduced by commit e9da73d67("thp: compound_lock."), it
is used to serialize put_page against __split_huge_page_refcount().  In
addition, transparent hugepages will be splitted in hwpoison handler and
just one subpage will be poisoned.  There is unnecessary to hold compound
lock for hugetlbfs page.  This patch replace compound_trans_order by
compond_order in the place where the page is hugetlbfs page.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:58:08 -07:00
Maxim Patlasov 5a53748568 mm/page-writeback.c: add strictlimit feature 
The feature prevents mistrusted filesystems (ie: FUSE mounts created by
unprivileged users) to grow a large number of dirty pages before
throttling.  For such filesystems balance_dirty_pages always check bdi
counters against bdi limits.  I.e.  even if global "nr_dirty" is under
"freerun", it's not allowed to skip bdi checks.  The only use case for now
is fuse: it sets bdi max_ratio to 1% by default and system administrators
are supposed to expect that this limit won't be exceeded.

The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag.  A
filesystem may set the flag when it initializes its BDI.

The problematic scenario comes from the fact that nobody pays attention to
the NR_WRITEBACK_TEMP counter (i.e.  number of pages under fuse
writeback).  The implementation of fuse writeback releases original page
(by calling end_page_writeback) almost immediately.  A fuse request queued
for real processing bears a copy of original page.  Hence, if userspace
fuse daemon doesn't finalize write requests in timely manner, an
aggressive mmap writer can pollute virtually all memory by those temporary
fuse page copies.  They are carefully accounted in NR_WRITEBACK_TEMP, but
nobody cares.

To make further explanations shorter, let me use "NR_WRITEBACK_TEMP
problem" as a shortcut for "a possibility of uncontrolled grow of amount
of RAM consumed by temporary pages allocated by kernel fuse to process
writeback".

The problem was very easy to reproduce.  There is a trivial example
filesystem implementation in fuse userspace distribution: fusexmp_fh.c.  I
added "sleep(1);" to the write methods, then recompiled and mounted it.
Then created a huge file on the mount point and run a simple program which
mmap-ed the file to a memory region, then wrote a data to the region.  An
hour later I observed almost all RAM consumed by fuse writeback.  Since
then some unrelated changes in kernel fuse made it more difficult to
reproduce, but it is still possible now.

Putting this theoretical happens-in-the-lab thing aside, there is another
thing that really hurts real world (FUSE) users.  This is write-through
page cache policy FUSE currently uses.  I.e.  handling write(2), kernel
fuse populates page cache and flushes user data to the server
synchronously.  This is excessively suboptimal.  Pavel Emelyanov's patches
("writeback cache policy") solve the problem, but they also make resolving
NR_WRITEBACK_TEMP problem absolutely necessary.  Otherwise, simply copying
a huge file to a fuse mount would result in memory starvation.  Miklos,
the maintainer of FUSE, believes strictlimit feature the way to go.

And eventually putting FUSE topics aside, there is one more use-case for
strictlimit feature.  Using a slow USB stick (mass storage) in a machine
with huge amount of RAM installed is a well-known pain.  Let's make simple
computations.  Assuming 64GB of RAM installed, existing implementation of
balance_dirty_pages will start throttling only after 9.6GB of RAM becomes
dirty (freerun == 15% of total RAM).  So, the command "cp 9GB_file
/media/my-usb-storage/" may return in a few seconds, but subsequent
"umount /media/my-usb-storage/" will take more than two hours if effective
throughput of the storage is, to say, 1MB/sec.

After inclusion of strictlimit feature, it will be trivial to add a knob
(e.g.  /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand.
Manually or via udev rule.  May be I'm wrong, but it seems to be quite a
natural desire to limit the amount of dirty memory for some devices we are
not fully trust (in the sense of sustainable throughput).

[akpm@linux-foundation.org: fix warning in page-writeback.c]
Signed-off-by: Maxim Patlasov <MPatlasov@parallels.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:58:04 -07:00
Wanpeng Li 7d9f073b8d mm/writeback: make writeback_inodes_wb static 
It's not used globally and could be static.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:58:02 -07:00
Lisa Du 6e543d5780 mm: vmscan: fix do_try_to_free_pages() livelock 
This patch is based on KOSAKI's work and I add a little more description,
please refer https://lkml.org/lkml/2012/6/14/74.

Currently, I found system can enter a state that there are lots of free
pages in a zone but only order-0 and order-1 pages which means the zone is
heavily fragmented, then high order allocation could make direct reclaim
path's long stall(ex, 60 seconds) especially in no swap and no compaciton
enviroment.  This problem happened on v3.4, but it seems issue still lives
in current tree, the reason is do_try_to_free_pages enter live lock:

kswapd will go to sleep if the zones have been fully scanned and are still
not balanced.  As kswapd thinks there's little point trying all over again
to avoid infinite loop.  Instead it changes order from high-order to
0-order because kswapd think order-0 is the most important.  Look at
73ce02e9 in detail.  If watermarks are ok, kswapd will go back to sleep
and may leave zone->all_unreclaimable =3D 0.  It assume high-order users
can still perform direct reclaim if they wish.

Direct reclaim continue to reclaim for a high order which is not a
COSTLY_ORDER without oom-killer until kswapd turn on
zone->all_unreclaimble= .  This is because to avoid too early oom-kill.
So it means direct_reclaim depends on kswapd to break this loop.

In worst case, direct-reclaim may continue to page reclaim forever when
kswapd sleeps forever until someone like watchdog detect and finally kill
the process.  As described in:
http://thread.gmane.org/gmane.linux.kernel.mm/103737

We can't turn on zone->all_unreclaimable from direct reclaim path because
direct reclaim path don't take any lock and this way is racy.  Thus this
patch removes zone->all_unreclaimable field completely and recalculates
zone reclaimable state every time.

Note: we can't take the idea that direct-reclaim see zone->pages_scanned
directly and kswapd continue to use zone->all_unreclaimable.  Because, it
is racy.  commit 929bea7c71 (vmscan: all_unreclaimable() use
zone->all_unreclaimable as a name) describes the detail.

[akpm@linux-foundation.org: uninline zone_reclaimable_pages() and zone_reclaimable()]
Cc: Aaditya Kumar <aaditya.kumar.30@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Bob Liu <lliubbo@gmail.com>
Cc: Neil Zhang <zhangwm@marvell.com>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Lisa Du <cldu@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:58:01 -07:00
Vlastimil Babka 7a8010cd36 mm: munlock: manual pte walk in fast path instead of follow_page_mask() 
Currently munlock_vma_pages_range() calls follow_page_mask() to obtain
each individual struct page.  This entails repeated full page table
translations and page table lock taken for each page separately.

This patch avoids the costly follow_page_mask() where possible, by
iterating over ptes within single pmd under single page table lock.  The
first pte is obtained by get_locked_pte() for non-THP page acquired by the
initial follow_page_mask().  The rest of the on-stack pagevec for munlock
is filled up using pte_walk as long as pte_present() and vm_normal_page()
are sufficient to obtain the struct page.

After this patch, a 14% speedup was measured for munlocking a 56GB large
memory area with THP disabled.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jörn Engel <joern@logfs.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:58:01 -07:00
Cyrill Gorcunov d9104d1ca9 mm: track vma changes with VM_SOFTDIRTY bit 
Pavel reported that in case if vma area get unmapped and then mapped (or
expanded) in-place, the soft dirty tracker won't be able to recognize this
situation since it works on pte level and ptes are get zapped on unmap,
loosing soft dirty bit of course.

So to resolve this situation we need to track actions on vma level, there
VM_SOFTDIRTY flag comes in.  When new vma area created (or old expanded)
we set this bit, and keep it here until application calls for clearing
soft dirty bit.

Thus when user space application track memory changes now it can detect if
vma area is renewed.

Reported-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:56 -07:00
Yinghai Lu e76b63f80d memblock, numa: binary search node id 
Current early_pfn_to_nid() on arch that support memblock go over
memblock.memory one by one, so will take too many try near the end.

We can use existing memblock_search to find the node id for given pfn,
that could save some time on bigger system that have many entries
memblock.memory array.

Here are the timing differences for several machines.  In each case with
the patch less time was spent in __early_pfn_to_nid().

                        3.11-rc5        with patch      difference (%)
                        --------        ----------      --------------
UV1: 256 nodes  9TB:     411.66          402.47         -9.19 (2.23%)
UV2: 255 nodes 16TB:    1141.02         1138.12         -2.90 (0.25%)
UV2:  64 nodes  2TB:     128.15          126.53         -1.62 (1.26%)
UV2:  32 nodes  2TB:     121.87          121.07         -0.80 (0.66%)
                        Time in seconds.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:51 -07:00
Naoya Horiguchi 83467efbdb mm: migrate: check movability of hugepage in unmap_and_move_huge_page() 
Currently hugepage migration works well only for pmd-based hugepages
(mainly due to lack of testing,) so we had better not enable migration of
other levels of hugepages until we are ready for it.

Some users of hugepage migration (mbind, move_pages, and migrate_pages) do
page table walk and check pud/pmd_huge() there, so they are safe.  But the
other users (softoffline and memory hotremove) don't do this, so without
this patch they can try to migrate unexpected types of hugepages.

To prevent this, we introduce hugepage_migration_support() as an
architecture dependent check of whether hugepage are implemented on a pmd
basis or not.  And on some architecture multiple sizes of hugepages are
available, so hugepage_migration_support() also checks hugepage size.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:49 -07:00
Naoya Horiguchi c8721bbbdd mm: memory-hotplug: enable memory hotplug to handle hugepage 
Until now we can't offline memory blocks which contain hugepages because a
hugepage is considered as an unmovable page.  But now with this patch
series, a hugepage has become movable, so by using hugepage migration we
can offline such memory blocks.

What's different from other users of hugepage migration is that we need to
decompose all the hugepages inside the target memory block into free buddy
pages after hugepage migration, because otherwise free hugepages remaining
in the memory block intervene the memory offlining.  For this reason we
introduce new functions dissolve_free_huge_page() and
dissolve_free_huge_pages().

Other than that, what this patch does is straightforwardly to add hugepage
migration code, that is, adding hugepage code to the functions which scan
over pfn and collect hugepages to be migrated, and adding a hugepage
allocation function to alloc_migrate_target().

As for larger hugepages (1GB for x86_64), it's not easy to do hotremove
over them because it's larger than memory block.  So we now simply leave
it to fail as it is.

[yongjun_wei@trendmicro.com.cn: remove duplicated include]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:48 -07:00
Naoya Horiguchi 71ea2efb1e mm: migrate: remove VM_HUGETLB from vma flag check in vma_migratable() 
Enable hugepage migration from migrate_pages(2), move_pages(2), and
mbind(2).

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:48 -07:00
Naoya Horiguchi 74060e4d78 mm: mbind: add hugepage migration code to mbind() 
Extend do_mbind() to handle vma with VM_HUGETLB set.  We will be able to
migrate hugepage with mbind(2) after applying the enablement patch which
comes later in this series.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:48 -07:00
Naoya Horiguchi b8ec1cee5a mm: soft-offline: use migrate_pages() instead of migrate_huge_page() 
Currently migrate_huge_page() takes a pointer to a hugepage to be migrated
as an argument, instead of taking a pointer to the list of hugepages to be
migrated.  This behavior was introduced in commit 189ebff28 ("hugetlb:
simplify migrate_huge_page()"), and was OK because until now hugepage
migration is enabled only for soft-offlining which migrates only one
hugepage in a single call.

But the situation will change in the later patches in this series which
enable other users of page migration to support hugepage migration.  They
can kick migration for both of normal pages and hugepages in a single
call, so we need to go back to original implementation which uses linked
lists to collect the hugepages to be migrated.

With this patch, soft_offline_huge_page() switches to use migrate_pages(),
and migrate_huge_page() is not used any more.  So let's remove it.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:47 -07:00
Naoya Horiguchi 31caf665e6 mm: migrate: make core migration code aware of hugepage 
Currently hugepage migration is available only for soft offlining, but
it's also useful for some other users of page migration (clearly because
users of hugepage can enjoy the benefit of mempolicy and memory hotplug.)
So this patchset tries to extend such users to support hugepage migration.

The target of this patchset is to enable hugepage migration for NUMA
related system calls (migrate_pages(2), move_pages(2), and mbind(2)), and
memory hotplug.

This patchset does not add hugepage migration for memory compaction,
because users of memory compaction mainly expect to construct thp by
arranging raw pages, and there's little or no need to compact hugepages.
CMA, another user of page migration, can have benefit from hugepage
migration, but is not enabled to support it for now (just because of lack
of testing and expertise in CMA.)

Hugepage migration of non pmd-based hugepage (for example 1GB hugepage in
x86_64, or hugepages in architectures like ia64) is not enabled for now
(again, because of lack of testing.)

As for how these are achived, I extended the API (migrate_pages()) to
handle hugepage (with patch 1 and 2) and adjusted code of each caller to
check and collect movable hugepages (with patch 3-7).  Remaining 2 patches
are kind of miscellaneous ones to avoid unexpected behavior.  Patch 8 is
about making sure that we only migrate pmd-based hugepages.  And patch 9
is about choosing appropriate zone for hugepage allocation.

My test is mainly functional one, simply kicking hugepage migration via
each entry point and confirm that migration is done correctly.  Test code
is available here:

  git://github.com/Naoya-Horiguchi/test_hugepage_migration_extension.git

And I always run libhugetlbfs test when changing hugetlbfs's code.  With
this patchset, no regression was found in the test.

This patch (of 9):

Before enabling each user of page migration to support hugepage,
this patch enables the list of pages for migration to link not only
LRU pages, but also hugepages. As a result, putback_movable_pages()
and migrate_pages() can handle both of LRU pages and hugepages.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:46 -07:00
Joonyoung Shim 674470d979 lib/genalloc.c: fix overflow of ending address of memory chunk 
In struct gen_pool_chunk, end_addr means the end address of memory chunk
(inclusive), but in the implementation it is treated as address + size of
memory chunk (exclusive), so it points to the address plus one instead of
correct ending address.

The ending address of memory chunk plus one will cause overflow on the
memory chunk including the last address of memory map, e.g.  when starting
address is 0xFFF00000 and size is 0x100000 on 32bit machine, ending
address will be 0x100000000.

Use correct ending address like starting address + size - 1.

[akpm@linux-foundation.org: add comment to struct gen_pool_chunk:end_addr]
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:35 -07:00
Christoph Lameter 2bb921e526 vmstat: create separate function to fold per cpu diffs into local counters 
The main idea behind this patchset is to reduce the vmstat update overhead
by avoiding interrupt enable/disable and the use of per cpu atomics.

This patch (of 3):

It is better to have a separate folding function because
refresh_cpu_vm_stats() also does other things like expire pages in the
page allocator caches.

If we have a separate function then refresh_cpu_vm_stats() is only called
from the local cpu which allows additional optimizations.

The folding function is only called when a cpu is being downed and
therefore no other processor will be accessing the counters.  Also
simplifies synchronization.

[akpm@linux-foundation.org: fix UP build]
Signed-off-by: Christoph Lameter <cl@linux.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
CC: Tejun Heo <tj@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:31 -07:00
Joonsoo Kim d2cf5ad631 swap: clean-up #ifdef in page_mapping() 
PageSwapCache() is always false when !CONFIG_SWAP, so compiler
properly discard related code. Therefore, we don't need #ifdef explicitly.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:31 -07:00
Johannes Weiner 81c0a2bb51 mm: page_alloc: fair zone allocator policy 
Each zone that holds userspace pages of one workload must be aged at a
speed proportional to the zone size.  Otherwise, the time an individual
page gets to stay in memory depends on the zone it happened to be
allocated in.  Asymmetry in the zone aging creates rather unpredictable
aging behavior and results in the wrong pages being reclaimed, activated
etc.

But exactly this happens right now because of the way the page allocator
and kswapd interact.  The page allocator uses per-node lists of all zones
in the system, ordered by preference, when allocating a new page.  When
the first iteration does not yield any results, kswapd is woken up and the
allocator retries.  Due to the way kswapd reclaims zones below the high
watermark while a zone can be allocated from when it is above the low
watermark, the allocator may keep kswapd running while kswapd reclaim
ensures that the page allocator can keep allocating from the first zone in
the zonelist for extended periods of time.  Meanwhile the other zones
rarely see new allocations and thus get aged much slower in comparison.

The result is that the occasional page placed in lower zones gets
relatively more time in memory, even gets promoted to the active list
after its peers have long been evicted.  Meanwhile, the bulk of the
working set may be thrashing on the preferred zone even though there may
be significant amounts of memory available in the lower zones.

Even the most basic test -- repeatedly reading a file slightly bigger than
memory -- shows how broken the zone aging is.  In this scenario, no single
page should be able stay in memory long enough to get referenced twice and
activated, but activation happens in spades:

  $ grep active_file /proc/zoneinfo
      nr_inactive_file 0
      nr_active_file 0
      nr_inactive_file 0
      nr_active_file 8
      nr_inactive_file 1582
      nr_active_file 11994
  $ cat data data data data >/dev/null
  $ grep active_file /proc/zoneinfo
      nr_inactive_file 0
      nr_active_file 70
      nr_inactive_file 258753
      nr_active_file 443214
      nr_inactive_file 149793
      nr_active_file 12021

Fix this with a very simple round robin allocator.  Each zone is allowed a
batch of allocations that is proportional to the zone's size, after which
it is treated as full.  The batch counters are reset when all zones have
been tried and the allocator enters the slowpath and kicks off kswapd
reclaim.  Allocation and reclaim is now fairly spread out to all
available/allowable zones:

  $ grep active_file /proc/zoneinfo
      nr_inactive_file 0
      nr_active_file 0
      nr_inactive_file 174
      nr_active_file 4865
      nr_inactive_file 53
      nr_active_file 860
  $ cat data data data data >/dev/null
  $ grep active_file /proc/zoneinfo
      nr_inactive_file 0
      nr_active_file 0
      nr_inactive_file 666622
      nr_active_file 4988
      nr_inactive_file 190969
      nr_active_file 937

When zone_reclaim_mode is enabled, allocations will now spread out to all
zones on the local node, not just the first preferred zone (which on a 4G
node might be a tiny Normal zone).

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Paul Bolle <paul.bollee@gmail.com>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:23 -07:00
Srivatsa S. Bhat f92310c187 mm/page_alloc.c: fix the value of fallback_migratetype in alloc_extfrag tracepoint() 
In the current code, the value of fallback_migratetype that is printed
using the mm_page_alloc_extfrag tracepoint, is the value of the
migratetype *after* it has been set to the preferred migratetype (if the
ownership was changed).  Obviously that wouldn't have been the original
intent.  (We already have a separate 'change_ownership' field to tell
whether the ownership of the pageblock was changed from the
fallback_migratetype to the preferred type.)

The intent of the fallback_migratetype field is to show the migratetype
from which we borrowed pages in order to satisfy the allocation request.
So fix the code to print that value correctly.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:19 -07:00
Shaohua Li ebc2a1a691 swap: make cluster allocation per-cpu 
swap cluster allocation is to get better request merge to improve
performance.  But the cluster is shared globally, if multiple tasks are
doing swap, this will cause interleave disk access.  While multiple tasks
swap is quite common, for example, each numa node has a kswapd thread
doing swap and multiple threads/processes doing direct page reclaim.

ioscheduler can't help too much here, because tasks don't send swapout IO
down to block layer in the meantime.  Block layer does merge some IOs, but
a lot not, depending on how many tasks are doing swapout concurrently.  In
practice, I've seen a lot of small size IO in swapout workloads.

We makes the cluster allocation per-cpu here.  The interleave disk access
issue goes away.  All tasks swapout to their own cluster, so swapout will
become sequential, which can be easily merged to big size IO.  If one CPU
can't get its per-cpu cluster (for example, there is no free cluster
anymore in the swap), it will fallback to scan swap_map.  The CPU can
still continue swap.  We don't need recycle free swap entries of other
CPUs.

In my test (swap to a 2-disk raid0 partition), this improves around 10%
swapout throughput, and request size is increased significantly.

How does this impact swap readahead is uncertain though.  On one side,
page reclaim always isolates and swaps several adjancent pages, this will
make page reclaim write the pages sequentially and benefit readahead.  On
the other side, several CPU write pages interleave means the pages don't
live _sequentially_ but relatively _near_.  In the per-cpu allocation
case, if adjancent pages are written by different cpus, they will live
relatively _far_.  So how this impacts swap readahead depends on how many
pages page reclaim isolates and swaps one time.  If the number is big,
this patch will benefit swap readahead.  Of course, this is about
sequential access pattern.  The patch has no impact for random access
pattern, because the new cluster allocation algorithm is just for SSD.

Alternative solution is organizing swap layout to be per-mm instead of
this per-cpu approach.  In the per-mm layout, we allocate a disk range for
each mm, so pages of one mm live in swap disk adjacently.  per-mm layout
has potential issues of lock contention if multiple reclaimers are swap
pages from one mm.  For a sequential workload, per-mm layout is better to
implement swap readahead, because pages from the mm are adjacent in disk.
But per-cpu layout isn't very bad in this workload, as page reclaim always
isolates and swaps several pages one time, such pages will still live in
disk sequentially and readahead can utilize this.  For a random workload,
per-mm layout isn't beneficial of request merge, because it's quite
possible pages from different mm are swapout in the meantime and IO can't
be merged in per-mm layout.  while with per-cpu layout we can merge
requests from any mm.  Considering random workload is more popular in
workloads with swap (and per-cpu approach isn't too bad for sequential
workload too), I'm choosing per-cpu layout.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Shaohua Li <shli@fusionio.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:17 -07:00
Shaohua Li 815c2c543d swap: make swap discard async 
swap can do cluster discard for SSD, which is good, but there are some
problems here:

1. swap do the discard just before page reclaim gets a swap entry and
   writes the disk sectors.  This is useless for high end SSD, because an
   overwrite to a sector implies a discard to original sector too.  A
   discard + overwrite == overwrite.

2. the purpose of doing discard is to improve SSD firmware garbage
   collection.  Idealy we should send discard as early as possible, so
   firmware can do something smart.  Sending discard just after swap entry
   is freed is considered early compared to sending discard before write.
   Of course, if workload is already bound to gc speed, sending discard
   earlier or later doesn't make

3. block discard is a sync API, which will delay scan_swap_map()
   significantly.

4. Write and discard command can be executed parallel in PCIe SSD.
   Making swap discard async can make execution more efficiently.

This patch makes swap discard async and moves discard to where swap entry
is freed.  Discard and write have no dependence now, so above issues can
be avoided.  Idealy we should do discard for any freed sectors, but some
SSD discard is very slow.  This patch still does discard for a whole
cluster.

My test does a several round of 'mmap, write, unmap', which will trigger a
lot of swap discard.  In a fusionio card, with this patch, the test
runtime is reduced to 18% of the time without it, so around 5.5x faster.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Shaohua Li <shli@fusionio.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:15 -07:00
Shaohua Li 2a8f944934 swap: change block allocation algorithm for SSD 
I'm using a fast SSD to do swap.  scan_swap_map() sometimes uses up to
20~30% CPU time (when cluster is hard to find, the CPU time can be up to
80%), which becomes a bottleneck.  scan_swap_map() scans a byte array to
search a 256 page cluster, which is very slow.

Here I introduced a simple algorithm to search cluster.  Since we only
care about 256 pages cluster, we can just use a counter to track if a
cluster is free.  Every 256 pages use one int to store the counter.  If
the counter of a cluster is 0, the cluster is free.  All free clusters
will be added to a list, so searching cluster is very efficient.  With
this, scap_swap_map() overhead disappears.

This might help low end SD card swap too.  Because if the cluster is
aligned, SD firmware can do flash erase more efficiently.

We only enable the algorithm for SSD.  Hard disk swap isn't fast enough
and has downside with the algorithm which might introduce regression (see
below).

The patch slightly changes which cluster is choosen.  It always adds free
cluster to list tail.  This can help wear leveling for low end SSD too.
And if no cluster found, the scan_swap_map() will do search from the end
of last cluster.  So if no cluster found, the scan_swap_map() will do
search from the end of last free cluster, which is random.  For SSD, this
isn't a problem at all.

Another downside is the cluster must be aligned to 256 pages, which will
reduce the chance to find a cluster.  I would expect this isn't a big
problem for SSD because of the non-seek penality.  (And this is the reason
I only enable the algorithm for SSD).

Signed-off-by: Shaohua Li <shli@fusionio.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:15 -07:00
Dave Hansen 6df46865ff mm: vmstats: track TLB flush stats on UP too 
The previous patch doing vmstats for TLB flushes ("mm: vmstats: tlb flush
counters") effectively missed UP since arch/x86/mm/tlb.c is only compiled
for SMP.

UP systems do not do remote TLB flushes, so compile those counters out on
UP.

arch/x86/kernel/cpu/mtrr/generic.c calls __flush_tlb() directly.  This is
probably an optimization since both the mtrr code and __flush_tlb() write
cr4.  It would probably be safe to make that a flush_tlb_all() (and then
get these statistics), but the mtrr code is ancient and I'm hesitant to
touch it other than to just stick in the counters.

[akpm@linux-foundation.org: tweak comments]
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:09 -07:00
Dave Hansen 9824cf9753 mm: vmstats: tlb flush counters 
I was investigating some TLB flush scaling issues and realized that we do
not have any good methods for figuring out how many TLB flushes we are
doing.

It would be nice to be able to do these in generic code, but the
arch-independent calls don't explicitly specify whether we actually need
to do remote flushes or not.  In the end, we really need to know if we
actually _did_ global vs.  local invalidations, so that leaves us with few
options other than to muck with the counters from arch-specific code.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:08 -07:00
Oleg Nesterov ef0855d334 mm: mempolicy: turn vma_set_policy() into vma_dup_policy() 
Simple cleanup.  Every user of vma_set_policy() does the same work, this
looks a bit annoying imho.  And the new trivial helper which does
mpol_dup() + vma_set_policy() to simplify the callers.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:57:00 -07:00
Cai Zhiyong bab55417b1 block: support embedded device command line partition 
Read block device partition table from command line.  The partition used
for fixed block device (eMMC) embedded device.  It is no MBR, save
storage space.  Bootloader can be easily accessed by absolute address of
data on the block device.  Users can easily change the partition.

This code reference MTD partition, source "drivers/mtd/cmdlinepart.c"
About the partition verbose reference
"Documentation/block/cmdline-partition.txt"

[akpm@linux-foundation.org: fix printk text]
[yongjun_wei@trendmicro.com.cn: fix error return code in parse_parts()]
Signed-off-by: Cai Zhiyong <caizhiyong@huawei.com>
Cc: Karel Zak <kzak@redhat.com>
Cc: "Wanglin (Albert)" <albert.wanglin@huawei.com>
Cc: Marius Groeger <mag@sysgo.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:56:57 -07:00
Oleg Nesterov e1403b8edf include/linux/sched.h: don't use task->pid/tgid in same_thread_group/has_group_leader_pid 
task_struct->pid/tgid should go away.

1. Change same_thread_group() to use task->signal for comparison.

2. Change has_group_leader_pid(task) to compare task_pid(task) with
   signal->leader_pid.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Sergey Dyasly <dserrg@gmail.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:56:56 -07:00
Andrew Morton 3b8967d713 include/linux/smp.h:on_each_cpu(): switch back to a C function 
Revert commit c846ef7deb ("include/linux/smp.h:on_each_cpu(): switch
back to a macro").  It turns out that the problematic linux/irqflags.h
include was fixed within ia64 and mn10300.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:56:19 -07:00
Linus Torvalds bbda1baeeb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 
Pull networking fixes from David Miller:

 1) Brown paper bag fix in HTB scheduler, class options set incorrectly
    due to a typoe.  Fix from Vimalkumar.

 2) It's possible for the ipv6 FIB garbage collector to run before all
    the necessary datastructure are setup during init, defer the
    notifier registry to avoid this problem.  Fix from Michal Kubecek.

 3) New i40e ethernet driver from the Intel folks.

 4) Add new qmi wwan device IDs, from Bjørn Mork.

 5) Doorbell lock in bnx2x driver is not initialized properly in some
    configurations, fix from Ariel Elior.

 6) Revert an ipv6 packet option padding change that broke standardized
    ipv6 implementation test suites.  From Jiri Pirko.

 7) Fix synchronization of ARP information in bonding layer, from
    Nikolay Aleksandrov.

 8) Fix missing error return resulting in illegal memory accesses in
    openvswitch, from Daniel Borkmann.

 9) SCTP doesn't signal poll events properly due to mistaken operator
    precedence, fix also from Daniel Borkmann.

10) __netdev_pick_tx() passes wrong index to sk_tx_queue_set() which
    essentially disables caching of TX queue in sockets :-/ Fix from
    Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
  net_sched: htb: fix a typo in htb_change_class()
  net: qmi_wwan: add new Qualcomm devices
  ipv6: don't call fib6_run_gc() until routing is ready
  net: tilegx driver: avoid compiler warning
  fib6_rules: fix indentation
  irda: vlsi_ir: Remove casting the return value which is a void pointer
  irda: donauboe: Remove casting the return value which is a void pointer
  net: fix multiqueue selection
  net: sctp: fix smatch warning in sctp_send_asconf_del_ip
  net: sctp: fix bug in sctp_poll for SOCK_SELECT_ERR_QUEUE
  net: fib: fib6_add: fix potential NULL pointer dereference
  net: ovs: flow: fix potential illegal memory access in __parse_flow_nlattrs
  bcm63xx_enet: remove deprecated IRQF_DISABLED
  net: korina: remove deprecated IRQF_DISABLED
  macvlan: Move skb_clone check closer to call
  qlcnic: Fix warning reported by kbuild test robot.
  bonding: fix bond_arp_rcv setting and arp validate desync state
  bonding: fix store_arp_validate race with mode change
  ipv6/exthdrs: accept tlv which includes only padding
  bnx2x: avoid atomic allocations during initialization
  ...
 2013-09-11 14:33:16 -07:00
Michal Kubeček 2c861cc65e ipv6: don't call fib6_run_gc() until routing is ready 
When loading the ipv6 module, ndisc_init() is called before
ip6_route_init(). As the former registers a handler calling
fib6_run_gc(), this opens a window to run the garbage collector
before necessary data structures are initialized. If a network
device is initialized in this window, adding MAC address to it
triggers a NETDEV_CHANGEADDR event, leading to a crash in
fib6_clean_all().

Take the event handler registration out of ndisc_init() into a
separate function ndisc_late_init() and move it after
ip6_route_init().

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2013-09-11 17:04:09 -04:00
Linus Torvalds 2b76db6a0f for-linus-3.12-merge minor 9p fixes and tweaks for 3.12 merge window 
The first fixes namespace issues which causes a kernel
 NULL pointer dereference, the second fixes uevent
 handling to work better with udev, and the third
 switches some code to use srlcpy instead of strncpy
 in order to be safer.
 
 All changes have been baking in for-next for at least
 2 weeks.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 Comment: GPGTools - http://gpgtools.org
 
 iQIcBAABAgAGBQJSMJjZAAoJEDZk62b0Tg6x81sQAKa60QStBKhnL65bvG+ooIsS
 mhwfmFyaWOKw1ezwY2Vk0+JnmKDBpKmqjjwyL3nLP18TcRZStPiFdcJBKWl+czge
 FTv14t54CcjysYPbYN7+gUap4F5mfg0mcHaR0UGow505dNyjwd7mqkZhy1IqhdvP
 Ue/h0RE46GeNtdirxrKBdEfW/7TAL0tcoRgjKu0ev1V2sXCJZywuXgkzWjByRXwT
 JOg04gGnYThuek0/KUPRhf0KxB0CyKrZiics7LGb40HkYYxs7ahADACttLyiDr8l
 GntfHXLgvVlU5QcSbKRfLp0zNbi7AxWmJrwYsEwpas4tUw1Q+pVJ2EE2Ameuq5G+
 LrMGmRVQCVYw8UN+OYUO7glhXEJcCPJj6vxgm+NVXx24yaQyGI1aTsIEjHwZ/hkm
 wlQHC47z6/fIypkXpsU6pYWF/r3GwXHokYReejATQWEPIzIxvHeThe0jjqMLth7F
 zmsHZTpmECqtti1fizy5wBZD25wAIxdf+rf8nKy1VvcSN4s08ESSlC/kV/siNeko
 efFnL8xbjP5SPEVoBtXM6eTDHrQ0S+ACSGWtp0FGXKOW4PKzS60ve2Stp+FYZgQc
 WgXI7+NBU6Z9z+cZ9bsY0hrGwK1YZiR4F3KJ5ofTuxAO6n7zd+N3fGBuQJ2tiW9P
 pKtIXNozWqnAU9Wx4rGa
 =YbFT
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-3.12-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs

Pull 9p updates from Eric Van Hensbergen:
 "Minor 9p fixes and tweaks for 3.12 merge window

  The first fixes namespace issues which causes a kernel NULL pointer
  dereference, the second fixes uevent handling to work better with
  udev, and the third switches some code to use srlcpy instead of
  strncpy in order to be safer.

  All changes have been baking in for-next for at least 2 weeks"

* tag 'for-linus-3.12-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: avoid accessing utsname after namespace has been torn down
  9p: send uevent after adding/removing mount_tag attribute
  fs: 9p: use strlcpy instead of strncpy
 2013-09-11 12:34:13 -07:00
Alex Deucher 9a71677874 drm/radeon: add some additional berlin pci ids 
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
 2013-09-11 11:44:30 -04:00
Rafael J. Wysocki 0df03a30c3 Merge branch 'pm-cpufreq' 
* pm-cpufreq:
  intel_pstate: Add Haswell CPU models
  Revert "cpufreq: make sure frequency transitions are serialized"
  cpufreq: Use signed type for 'ret' variable, to store negative error values
  cpufreq: Remove temporary fix for race between CPU hotplug and sysfs-writes
  cpufreq: Synchronize the cpufreq store_*() routines with CPU hotplug
  cpufreq: Invoke __cpufreq_remove_dev_finish() after releasing cpu_hotplug.lock
  cpufreq: Split __cpufreq_remove_dev() into two parts
  cpufreq: Fix wrong time unit conversion
  cpufreq: serialize calls to __cpufreq_governor()
  cpufreq: don't allow governor limits to be changed when it is disabled
 2013-09-11 15:23:15 +02:00
Mark Brown 2ae2caff83 Merge remote-tracking branch 'asoc/fix/rsnd' into asoc-linus 2013-09-11 11:17:17 +01:00
Mark Brown c34c0d7684 Merge remote-tracking branch 'asoc/fix/fsl' into asoc-linus 2013-09-11 11:17:15 +01:00
Mark Brown 29dc5dd229 Merge remote-tracking branch 'asoc/fix/atmel' into asoc-linus 2013-09-11 11:17:14 +01:00
Linus Torvalds a22a0fdba4 New drivers: 
- APM X-Gene system reboot driver by Feng Kan and Loc Ho (APM).
 
 - Qualcomm MSM reboot/poweroff driver by Abhimanyu Kapur (Codeaurora).
 
 - Texas Instruments BQ24190 charger driver by Mark A. Greer (Animal Creek
   Technologies).
 
 - Texas Instruments TWL4030 MADC battery driver by Lukas Märdian and Marek
   Belisko (Golden Delicious Computers). The driver is used on Freerunner
   GTA04 phones.
 
 Highlighted fixes and improvements:
 
 - Suspend/wakeup logic improvements: power supply objects will block
   system suspend until all power supply events are processed. Thanks to
   Zoran Markovic (Linaro), Arve Hjonnevag and Todd Poynor (Google).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJSL/sOAAoJEGgI9fZJve1bDMAP/ih4C5NsuRsQxZMzTWIft80+
 S9r/co8Q/1LXgxqdMe1xq0pPgceuXCTHXjSK+ZM+/A9Qi/jFVg1S8skrAlUzMq2m
 PaRbyAVxtahU1uUIXqQLNbYO/IuRKNdXnREVt6w4K9BMjbjhsNdIRG6zOdsLxhKL
 r64sm3fqEJNRxIGuGzXPnMLNTL99uDJmMs1oPHAJwGXqWQA74K8iBHRgzi+kTAxG
 juDerMGoxU7modEQMlK4jKYj2bju4liYsrQ9pQBU1QUmHgPl7QLigXHtnkbWivrN
 nPPSJCNdtCXXtazU0ptkI717aPo0SBtEVQETF960ZTASdoqt2Ver8h4RW7dBAOIw
 tc4hdbJjZvuaDz4Os2Wy0NW+1uXVmj/Jyl9WtNtI8XYBMT0GWNN16xZZYKX303UG
 h0Myw2XhNko95g6XxQBfiat5VlH8aSIDz3LVTM1RC9zrDvjmpsI7bx+17Tw2+McK
 WdPNNHjCcgRNOIVt/vLYxQYxbJWfPf6IW2nn1v9Kc96K5WD2+3n6bn833szxFu75
 FnNghYLKkp9iXKXgGysHKoczAQa0eUxjAE/UAo10i4Eg7JmXF2Q4A+wwa2QrMutK
 FlfQo8pJGAiw0xGjkbPw8DkgBEkY8v9cJEIr0BUI6LwUoraeAjlkLjC5Im3V9bYM
 YRSzcSEESc3J/1YTGmam
 =k4RI
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.12' of git://git.infradead.org/battery-2.6

Pull battery/power supply driver updates from Anton Vorontsov:
 "New drivers:

   - APM X-Gene system reboot driver by Feng Kan and Loc Ho (APM).

   - Qualcomm MSM reboot/poweroff driver by Abhimanyu Kapur (Codeaurora).

   - Texas Instruments BQ24190 charger driver by Mark A.  Greer (Animal
     Creek Technologies).

   - Texas Instruments TWL4030 MADC battery driver by Lukas Märdian and
     Marek Belisko (Golden Delicious Computers).  The driver is used on
     Freerunner GTA04 phones.

  Highlighted fixes and improvements:

   - Suspend/wakeup logic improvements: power supply objects will block
     system suspend until all power supply events are processed.  Thanks
     to Zoran Markovic (Linaro), Arve Hjonnevag and Todd Poynor (Google)"

* tag 'for-v3.12' of git://git.infradead.org/battery-2.6:
  rx51_battery: Fix channel number when reading adc value
  power: Add twl4030_madc battery driver.
  bq24190_charger: Workaround SS definition problem on i386 builds
  power_supply: Prevent suspend until power supply events are processed
  vexpress-poweroff: Should depend on the required infrastructure
  twl4030-charger: Fix compiler warning with regulator_enable()
  rx51_battery: Replace hardcoded channels values.
  bq24190_charger: Add support for TI BQ24190 Battery Charger
  ab8500-charger: We print an unintended error message
  max8925_power: Fix missing of_node_put
  power_supply: Replace strict_strtol() with kstrtol()
  power: Add APM X-Gene system reboot driver
  power_supply: tosa_battery: Get rid of irq_to_gpio usage
  power supply: collie_battery: Convert to use dev_pm_ops
  power_supply: Make goldfish_battery depend on GOLDFISH || COMPILE_TEST
  power: reset: Add msm restart support
  MAINTAINERS: drivers/power: add entry for SmartReflex AVS drivers
 2013-09-10 22:58:14 -07:00
Nicholas Bellinger 2999ee7fda target/iscsi: Bump versions to v4.1.0 
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
 2013-09-10 20:23:37 -07:00
Linus Torvalds fa1586a7e4 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux 
Pull drm fixes from Dave Airlie:
 "Daniel had some fixes queued up, that were delayed, the stolen memory
  ones and vga arbiter ones are quite useful, along with his usual bunch
  of stuff, nothing for HSW outputs yet.

  The one nouveau fix is for a regression I caused with the poweroff stuff"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (30 commits)
  drm/nouveau: fix oops on runtime suspend/resume
  drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done
  drm/i915: try not to lose backlight CBLV precision
  drm/i915: Confine page flips to BCS on Valleyview
  drm/i915: Skip stolen region initialisation if none is reserved
  drm/i915: fix gpu hang vs. flip stall deadlocks
  drm/i915: Hold an object reference whilst we shrink it
  drm/i915: fix i9xx_crtc_clock_get for multiplied pixels
  drm/i915: handle sdvo input pixel multiplier correctly again
  drm/i915: fix hpd work vs. flush_work in the pageflip code deadlock
  drm/i915: fix up the relocate_entry refactoring
  drm/i915: Fix pipe config warnings when dealing with LVDS fixed mode
  drm/i915: Don't call sg_free_table() if sg_alloc_table() fails
  i915: Update VGA arbiter support for newer devices
  vgaarb: Fix VGA decodes changes
  vgaarb: Don't disable resources that are not owned
  drm/i915: Pin pages whilst mapping the dma-buf
  drm/i915: enable trickle feed on Haswell
  x86: add early quirk for reserving Intel graphics stolen memory v5
  drm/i915: split PCI IDs out into i915_drm.h v4
  ...
 2013-09-10 20:05:57 -07:00
Linus Torvalds cf596766fc Merge branch 'nfsd-next' of git://linux-nfs.org/~bfields/linux 
Pull nfsd updates from Bruce Fields:
 "This was a very quiet cycle! Just a few bugfixes and some cleanup"

* 'nfsd-next' of git://linux-nfs.org/~bfields/linux:
  rpc: let xdr layer allocate gssproxy receieve pages
  rpc: fix huge kmalloc's in gss-proxy
  rpc: comment on linux_cred encoding, treat all as unsigned
  rpc: clean up decoding of gssproxy linux creds
  svcrpc: remove unused rq_resused
  nfsd4: nfsd4_create_clid_dir prints uninitialized data
  nfsd4: fix leak of inode reference on delegation failure
  Revert "nfsd: nfs4_file_get_access: need to be more careful with O_RDWR"
  sunrpc: prepare NFS for 2038
  nfsd4: fix setlease error return
  nfsd: nfs4_file_get_access: need to be more careful with O_RDWR
 2013-09-10 20:04:59 -07:00
Nicholas Bellinger d397a445f4 target: Add Third Party Copy (3PC) bit in INQUIRY response 
This patch adds the Third Party Copy (3PC) bit to signal support
for EXTENDED_COPY within standard inquiry response data.

Also add emulate_3pc device attribute in configfs (enabled by default)
to allow the exposure of this bit to be disabled, if necessary.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Zach Brown <zab@redhat.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
 2013-09-10 16:48:46 -07:00
Nicholas Bellinger cbf031f425 target: Add support for EXTENDED_COPY copy offload emulation 
This patch adds support for EXTENDED_COPY emulation from SPC-3, that
enables full copy offload target support within both a single virtual
backend device, and across multiple virtual backend devices.  It also
functions independent of target fabric, and supports copy offload
across multiple target fabric ports.

This implemenation supports both EXTENDED_COPY PUSH and PULL models
of operation, so the actual CDB may be received on either source or
desination logical unit.

For Target Descriptors, it currently supports the NAA IEEE Registered
Extended designator (type 0xe4), which allows the reference of target
ports to occur independent of fabric type using EVPD 0x83 WWNs.

For Segment Descriptors, it currently supports copy from block to
block (0x02) mode.

It also honors any present SCSI reservations of the destination target
port.  Note that only Supports No List Identifier (SNLID=1) mode is
supported.

Also included is basic RECEIVE_COPY_RESULTS with service action type
OPERATING PARAMETERS (0x03) required for SNLID=1 operation.

v3 changes:
  - Fix incorrect return type in target_do_receive_copy_results()
    (Fengguang)

v2 changes:
  - Use target_alloc_sgl() instead of transport_generic_get_mem()
  - Convert debug output to use pr_debug()
  - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN
    dump to use 0x%16phN format specification
  - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and
    associated usage in xcopy_pt_write_pending() and
    target_xcopy_issue_pt_cmd()
  - Add check for unsupported EXTENDED_COPY(LID4) service action
    bits in target_do_xcopy()

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Zach Brown <zab@redhat.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
 2013-09-10 16:48:43 -07:00
Nicholas Bellinger d9ea32bff2 target: Add global device list for EXTENDED_COPY 
EXTENDED_COPY needs to be able to search a global list of devices
based on NAA WWN device identifiers, so add a simple g_device_list
protected by g_device_mutex.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Zach Brown <zab@redhat.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
 2013-09-10 16:48:40 -07:00
Nicholas Bellinger c5ff8d6bc3 target: Make helpers non static for EXTENDED_COPY command setup 
Both target_alloc_sgl() and transport_generic_map_mem_to_cmd() are
required by EXTENDED_COPY logic when setting up internally dispatched
command descriptors, so go ahead and make both of these non static.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Zach Brown <zab@redhat.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
 2013-09-10 16:48:39 -07:00
Nicholas Bellinger b3faa2e87c target/tcm_qla2xxx: Add/use target_reverse_dma_direction() in target_core_fabric.h 
Reversing the dma_data_direction for pci_map_sg() friends is useful
for other drivers, so move it from tcm_qla2xxx into inline code
within target_core_fabric.h.

Also drop internal usage of equivlient in tcm_qla2xxx fabric code.

Reported-by: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Cc: Chad Dupuis <chad.dupuis@qlogic.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
 2013-09-10 16:48:35 -07:00
Nicholas Bellinger 68ff9b9b27 target: Add support for COMPARE_AND_WRITE emulation 
This patch adds support for COMPARE_AND_WRITE emulation on a per block
basis.  This logic is used as an atomic test and set primative currently
used by VMWare ESX VAAI for performing array side locking of individual
VMFS extent ownership.

This includes the COMPARE_AND_WRITE CDB parsing within sbc_parse_cdb(),
and does the majority of the work within the compare_and_write_callback()
to perform the verify instance user data comparision, and subsequent
write instance user data I/O submission upon a successfull comparision.

The synchronization is enforced by se_device->caw_sem, that is obtained
before the initial READ I/O submission in sbc_compare_and_write().  The
mutex is then released upon MISCOMPARE in compare_and_write_callback(),
or upon WRITE instance user-data completion in compare_and_write_post().

The implementation currently assumes a single logical block (NoLB=1).

v4 changes:
 - Explicitly clear cmd->transport_complete_callback for two failure
   cases in sbc_compare_and_write() in order to avoid double unlock
   of ->caw_sem in compare_and_write_callback() (Dan Carpenter)

v3 changes:
 - Convert se_device->caw_mutex to ->caw_sem

v2 changes:
 - Set SCF_COMPARE_AND_WRITE and cmd->execute_cmd() to
   sbc_compare_and_write() during setup in sbc_parse_cdb()
 - Use sbc_compare_and_write() for initial READ submission with
   DMA_FROM_DEVICE
 - Reset cmd->execute_cmd() to sbc_execute_rw() for write instance
   user-data in compare_and_write_callback()
 - Drop SCF_BIDI command flag usage
 - Set TRANSPORT_PROCESSING + transport_state flags before write
   instance submission, and convert to __target_execute_cmd()
 - Prevent sbc_get_size() from being being called twice to
   generate incorrect size in sbc_parse_cdb()
 - Enforce se_device->caw_mutex synchronization between initial
   READ I/O submission, and final WRITE I/O completion.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
 2013-09-10 16:41:59 -07:00
Glauber Costa 5ca302c8e5 list_lru: dynamically adjust node arrays 
We currently use a compile-time constant to size the node array for the
list_lru structure.  Due to this, we don't need to allocate any memory at
initialization time.  But as a consequence, the structures that contain
embedded list_lru lists can become way too big (the superblock for
instance contains two of them).

This patch aims at ameliorating this situation by dynamically allocating
the node arrays with the firmware provided nr_node_ids.

Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:32 -04:00
Dave Chinner a0b02131c5 shrinker: Kill old ->shrink API. 
There are no more users of this API, so kill it dead, dead, dead and
quietly bury the corpse in a shallow, unmarked grave in a dark forest deep
in the hills...

[glommer@openvz.org: added flowers to the grave]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Reviewed-by: Greg Thelen <gthelen@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:32 -04:00
Dave Chinner 9b17c62382 fs: convert inode and dentry shrinking to be node aware 
Now that the shrinker is passing a node in the scan control structure, we
can pass this to the the generic LRU list code to isolate reclaim to the
lists on matching nodes.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:31 -04:00
Glauber Costa 1d3d4437ea vmscan: per-node deferred work 
The list_lru infrastructure already keeps per-node LRU lists in its
node-specific list_lru_node arrays and provide us with a per-node API, and
the shrinkers are properly equiped with node information.  This means that
we can now focus our shrinking effort in a single node, but the work that
is deferred from one run to another is kept global at nr_in_batch.  Work
can be deferred, for instance, during direct reclaim under a GFP_NOFS
allocation, where situation, all the filesystem shrinkers will be
prevented from running and accumulate in nr_in_batch the amount of work
they should have done, but could not.

This creates an impedance problem, where upon node pressure, work deferred
will accumulate and end up being flushed in other nodes.  The problem we
describe is particularly harmful in big machines, where many nodes can
accumulate at the same time, all adding to the global counter nr_in_batch.
 As we accumulate more and more, we start to ask for the caches to flush
even bigger numbers.  The result is that the caches are depleted and do
not stabilize.  To achieve stable steady state behavior, we need to tackle
it differently.

In this patch we keep the deferred count per-node, in the new array
nr_deferred[] (the name is also a bit more descriptive) and will never
accumulate that to other nodes.

Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:31 -04:00
Dave Chinner 0ce3d74450 shrinker: add node awareness 
Pass the node of the current zone being reclaimed to shrink_slab(),
allowing the shrinker control nodemask to be set appropriately for node
aware shrinkers.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:31 -04:00
Glauber Costa 4e717f5c10 list_lru: remove special case function list_lru_dispose_all. 
The list_lru implementation has one function, list_lru_dispose_all, with
only one user (the dentry code).  At first, such function appears to make
sense because we are really not interested in the result of isolating each
dentry separately - all of them are going away anyway.  However, it's
implementation is buggy in the following way:

When we call list_lru_dispose_all in fs/dcache.c, we scan all dentries
marking them with DCACHE_SHRINK_LIST.  However, this is done without the
nlru->lock taken.  The imediate result of that is that someone else may
add or remove the dentry from the LRU at the same time.  When list_lru_del
happens in that scenario we will see an element that is not yet marked
with DCACHE_SHRINK_LIST (even though it will be in the future) and
obviously remove it from an lru where the element no longer is.  Since
list_lru_dispose_all will in effect count down nlru's nr_items and
list_lru_del will do the same, this will lead to an imbalance.

The solution for this would not be so simple: we can obviously just keep
the lru_lock taken, but then we have no guarantees that we will be able to
acquire the dentry lock (dentry->d_lock).  To properly solve this, we need
a communication mechanism between the lru and dentry code, so they can
coordinate this with each other.

Such mechanism already exists in the form of the list_lru_walk_cb
callback.  So it is possible to construct a dcache-side prune function
that does the right thing only by calling list_lru_walk in a loop until no
more dentries are available.

With only one user, plus the fact that a sane solution for the problem
would involve boucing between dcache and list_lru anyway, I see little
justification to keep the special case list_lru_dispose_all in tree.

Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: Michal Hocko <mhocko@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:31 -04:00
Glauber Costa 6a4f496fd2 list_lru: per-node API 
This patch adapts the list_lru API to accept an optional node argument, to
be used by NUMA aware shrinking functions.  Code that does not care about
the NUMA placement of objects can still call into the very same functions
as before.  They will simply iterate over all nodes.

Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:30 -04:00
Dave Chinner 3b1d58a4c9 list_lru: per-node list infrastructure 
Now that we have an LRU list API, we can start to enhance the
implementation.  This splits the single LRU list into per-node lists and
locks to enhance scalability.  Items are placed on lists according to the
node the memory belongs to.  To make scanning the lists efficient, also
track whether the per-node lists have entries in them in a active
nodemask.

Note: We use a fixed-size array for the node LRU, this struct can be very
big if MAX_NUMNODES is big.  If this becomes a problem this is fixable by
turning this into a pointer and dynamically allocating this to
nr_node_ids.  This quantity is firwmare-provided, and still would provide
room for all nodes at the cost of a pointer lookup and an extra
allocation.  Because that allocation will most likely come from a may very
well fail.

[glommer@openvz.org: fix warnings, added note about node lru]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Reviewed-by: Greg Thelen <gthelen@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:30 -04:00
Dave Chinner f604156751 dcache: convert to use new lru list infrastructure 
[glommer@openvz.org: don't reintroduce double decrement of nr_unused_dentries, adapted for new LRU return codes]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:30 -04:00
Dave Chinner bc3b14cb2d inode: convert inode lru list to generic lru list code. 
[glommer@openvz.org: adapted for new LRU return codes]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:30 -04:00
Dave Chinner a38e408248 list: add a new LRU list type 
Several subsystems use the same construct for LRU lists - a list head, a
spin lock and and item count.  They also use exactly the same code for
adding and removing items from the LRU.  Create a generic type for these
LRU lists.

This is the beginning of generic, node aware LRUs for shrinkers to work
with.

[glommer@openvz.org: enum defined constants for lru. Suggested by gthelen, don't relock over retry]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Reviewed-by: Greg Thelen <gthelen@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:30 -04:00
Dave Chinner 0a234c6dcb shrinker: convert superblock shrinkers to new API 
Convert superblock shrinker to use the new count/scan API, and propagate
the API changes through to the filesystem callouts.  The filesystem
callouts already use a count/scan API, so it's just changing counters to
longs to match the VM API.

This requires the dentry and inode shrinker callouts to be converted to
the count/scan API.  This is mainly a mechanical change.

[glommer@openvz.org: use mult_frac for fractional proportions, build fixes]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:30 -04:00
Dave Chinner 24f7c6b981 mm: new shrinker API 
The current shrinker callout API uses an a single shrinker call for
multiple functions.  To determine the function, a special magical value is
passed in a parameter to change the behaviour.  This complicates the
implementation and return value specification for the different
behaviours.

Separate the two different behaviours into separate operations, one to
return a count of freeable objects in the cache, and another to scan a
certain number of objects in the cache for freeing.  In defining these new
operations, ensure the return values and resultant behaviours are clearly
defined and documented.

Modify shrink_slab() to use the new API and implement the callouts for all
the existing shrinkers.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:30 -04:00
Dave Chinner 19156840e3 dentry: move to per-sb LRU locks 
With the dentry LRUs being per-sb structures, there is no real need for
a global dentry_lru_lock. The locking can be made more fine-grained by
moving to a per-sb LRU lock, isolating the LRU operations of different
filesytsems completely from each other. The need for this is independent
of any performance consideration that may arise: in the interest of
abstracting the lru operations away, it is mandatory that each lru works
around its own lock instead of a global lock for all of them.

[glommer@openvz.org: updated changelog ]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:30 -04:00
Glauber Costa 55f841ce93 super: fix calculation of shrinkable objects for small numbers 
The sysctl knob sysctl_vfs_cache_pressure is used to determine which
percentage of the shrinkable objects in our cache we should actively try
to shrink.

It works great in situations in which we have many objects (at least more
than 100), because the aproximation errors will be negligible.  But if
this is not the case, specially when total_objects < 100, we may end up
concluding that we have no objects at all (total / 100 = 0, if total <
100).

This is certainly not the biggest killer in the world, but may matter in
very low kernel memory situations.

Signed-off-by: Glauber Costa <glommer@openvz.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:29 -04:00
Glauber Costa 3942c07ccf fs: bump inode and dentry counters to long 
This series reworks our current object cache shrinking infrastructure in
two main ways:

 * Noticing that a lot of users copy and paste their own version of LRU
   lists for objects, we put some effort in providing a generic version.
   It is modeled after the filesystem users: dentries, inodes, and xfs
   (for various tasks), but we expect that other users could benefit in
   the near future with little or no modification.  Let us know if you
   have any issues.

 * The underlying list_lru being proposed automatically and
   transparently keeps the elements in per-node lists, and is able to
   manipulate the node lists individually.  Given this infrastructure, we
   are able to modify the up-to-now hammer called shrink_slab to proceed
   with node-reclaim instead of always searching memory from all over like
   it has been doing.

Per-node lru lists are also expected to lead to less contention in the lru
locks on multi-node scans, since we are now no longer fighting for a
global lock.  The locks usually disappear from the profilers with this
change.

Although we have no official benchmarks for this version - be our guest to
independently evaluate this - earlier versions of this series were
performance tested (details at
http://permalink.gmane.org/gmane.linux.kernel.mm/100537) yielding no
visible performance regressions while yielding a better qualitative
behavior in NUMA machines.

With this infrastructure in place, we can use the list_lru entry point to
provide memcg isolation and per-memcg targeted reclaim.  Historically,
those two pieces of work have been posted together.  This version presents
only the infrastructure work, deferring the memcg work for a later time,
so we can focus on getting this part tested.  You can see more about the
history of such work at http://lwn.net/Articles/552769/

Dave Chinner (18):
  dcache: convert dentry_stat.nr_unused to per-cpu counters
  dentry: move to per-sb LRU locks
  dcache: remove dentries from LRU before putting on dispose list
  mm: new shrinker API
  shrinker: convert superblock shrinkers to new API
  list: add a new LRU list type
  inode: convert inode lru list to generic lru list code.
  dcache: convert to use new lru list infrastructure
  list_lru: per-node list infrastructure
  shrinker: add node awareness
  fs: convert inode and dentry shrinking to be node aware
  xfs: convert buftarg LRU to generic code
  xfs: rework buffer dispose list tracking
  xfs: convert dquot cache lru to list_lru
  fs: convert fs shrinkers to new scan/count API
  drivers: convert shrinkers to new count/scan API
  shrinker: convert remaining shrinkers to count/scan API
  shrinker: Kill old ->shrink API.

Glauber Costa (7):
  fs: bump inode and dentry counters to long
  super: fix calculation of shrinkable objects for small numbers
  list_lru: per-node API
  vmscan: per-node deferred work
  i915: bail out earlier when shrinker cannot acquire mutex
  hugepage: convert huge zero page shrinker to new shrinker API
  list_lru: dynamically adjust node arrays

This patch:

There are situations in very large machines in which we can have a large
quantity of dirty inodes, unused dentries, etc.  This is particularly true
when umounting a filesystem, where eventually since every live object will
eventually be discarded.

Dave Chinner reported a problem with this while experimenting with the
shrinker revamp patchset.  So we believe it is time for a change.  This
patch just moves int to longs.  Machines where it matters should have a
big long anyway.

Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:29 -04:00
Christoph Hellwig aac34df117 fs: remove vfs_follow_link 
For a long time no filesystem has been using vfs_follow_link, and as seen
by recent filesystem submissions any new use is accidental as well.

Remove vfs_follow_link, document the replacement in
Documentation/filesystems/porting and also rename __vfs_follow_link
to match its only caller better.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-10 18:56:29 -04:00
Mike Miller 97b9f53d7d [SCSI] hpsa: add HP Smart Array Gen9 PCI ID's 
This patch adds the PCI ID's for HP Smart Array Gen9 controllers. Please
consider this patch for inclusion.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 2013-09-10 14:14:21 -07:00
Linus Torvalds 31f7c3a688 Device tree core updates for v3.12 
Generally minor changes. A bunch of bug fixes, particularly for
 initialization and some refactoring. Most notable change if feeding the
 entire flattened tree into the random pool at boot. May not be
 significant, but shouldn't hurt either.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSL12LAAoJEEFnBt12D9kB64gP/RBipnYbo3RPanHg+lE/J1V7
 KSVFNGKWJHxTg47VVC1YJGIG21jqxAilpdS2MQL5FP7iyd+IzvtHpQiJgp+2G+pq
 di06yrdyrYErxRgZgGQi8IpR538ZzOEVLCKJGdb09YelkRzPT5au7CC1MAsX3qco
 yba7PHk0/Nc4hZE4aGbgR1DlRmn86ob7mM0KFE/LORaSN2BueMgWcwKhQXYNGyoh
 assX4yNhAbUG6Bgw7paBLDGqHh8c5Ei5AppU8yPb+N094jgYHBJryUoDlzzUHD23
 qqiEqHhUKT0TpgHNs8KH0WZFugcmjKvYEbzdzadBxqfXnJN4fKSEcdfF3iz4T14j
 U6EZks89GoHwA523OghUZkKNOqlsUdWfdKz+8/grQqKisYwDcf3fCxEYk/4weDCQ
 b6fFlOv6+AI3btjXp6F511ZKxyT4ZZzkHjp/ZSrhBygyamNZfax0ma0j+ZS9AZql
 kPxQS0nOve6NKaP7vXxMmW5sGMnL19ER/Hm31wthGcWI43GVebUdklnzfGaEeSjs
 pmP8oiCNemceqVpiPKxcOxiguf/eyIjP1SFXbguASygUmQeTDbbJ8n1FYznCitue
 xJgWttKWsEf/aMR3eJtQ3aBmHR3rijAV4E28Wlq8XMkocwvpQm2zMocS2Z5BJ80S
 hi1kQVy8+RxNX96tOSp1
 =GSWl
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux

Pull device tree core updates from Grant Likely:
 "Generally minor changes.  A bunch of bug fixes, particularly for
  initialization and some refactoring.  Most notable change if feeding
  the entire flattened tree into the random pool at boot.  May not be
  significant, but shouldn't hurt either"

Tim Bird questions whether the boot time cost of the random feeding may
be noticeable.  And "add_device_randomness()" is definitely not some
speed deamon of a function.

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux:
  of/platform: add error reporting to of_amba_device_create()
  irq/of: Fix comment typo for irq_of_parse_and_map
  of: Feed entire flattened device tree into the random pool
  of/fdt: Clean up casting in unflattening path
  of/fdt: Remove duplicate memory clearing on FDT unflattening
  gpio: implement gpio-ranges binding document fix
  of: call __of_parse_phandle_with_args from of_parse_phandle
  of: introduce of_parse_phandle_with_fixed_args
  of: move of_parse_phandle()
  of: move documentation of of_parse_phandle_with_args
  of: Fix missing memory initialization on FDT unflattening
  of: consolidate definition of early_init_dt_alloc_memory_arch()
  of: Make of_get_phy_mode() return int i.s.o. const int
  include: dt-binding: input: create a DT header defining key codes.
  of/platform: Staticize of_platform_device_create_pdata()
  of: Specify initrd location using 64-bit
  dt: Typo fix
  OF: make of_property_for_each_{u32|string}() use parameters if OF is not enabled
 2013-09-10 13:53:52 -07:00
Linus Torvalds ec5b103ecf Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma 
Pull slave-dmaengine updates from Vinod Koul:
 "This pull brings:
   - Andy's DW driver updates
   - Guennadi's sh driver updates
   - Pl08x driver fixes from Tomasz & Alban
   - Improvements to mmp_pdma by Daniel
   - TI EDMA fixes by Joel
   - New drivers:
     - Hisilicon k3dma driver
     - Renesas rcar dma driver
  - New API for publishing slave driver capablities
  - Various fixes across the subsystem by Andy, Jingoo, Sachin etc..."

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (94 commits)
  dma: edma: Remove limits on number of slots
  dma: edma: Leave linked to Null slot instead of DUMMY slot
  dma: edma: Find missed events and issue them
  ARM: edma: Add function to manually trigger an EDMA channel
  dma: edma: Write out and handle MAX_NR_SG at a given time
  dma: edma: Setup parameters to DMA MAX_NR_SG at a time
  dmaengine: pl330: use dma_set_max_seg_size to set the sg limit
  dmaengine: dma_slave_caps: remove sg entries
  dma: replace devm_request_and_ioremap by devm_ioremap_resource
  dma: ste_dma40: Fix potential null pointer dereference
  dma: ste_dma40: Remove duplicate const
  dma: imx-dma: Remove redundant NULL check
  dma: dmagengine: fix function names in comments
  dma: add driver for R-Car HPB-DMAC
  dma: k3dma: use devm_ioremap_resource() instead of devm_request_and_ioremap()
  dma: imx-sdma: Staticize sdma_driver_data structures
  pch_dma: Add MODULE_DEVICE_TABLE
  dmaengine: PL08x: Add cyclic transfer support
  dmaengine: PL08x: Fix reading the byte count in cctl
  dmaengine: PL08x: Add support for different maximum transfer size
  ...
 2013-09-10 13:37:36 -07:00
Linus Torvalds d0048f0b91 MMC highlights for 3.12: 
Core:
  - Support Allocation Units 8MB-64MB in SD3.0, previous max was 4MB.
  - The slot-gpio helper can now handle GPIO debouncing card-detect.
  - Read supported voltages from DT "voltage-ranges" property.
 
 Drivers:
  - dw_mmc: Add support for ARC architecture, and support exynos5420.
  - mmc_spi: Support CD/RO GPIOs.
  - sh_mobile_sdhi: Add compatibility for more Renesas SoCs.
  - sh_mmcif: Add DT support for DMA channels.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJSLxu8AAoJEHNBYZ7TNxYMkV8P/RZMkP3L88wPmvdQ4IxVD/Bg
 jphPsZTAlY8pLY7EcBVfbIGfBMMoVZ8CayuAbj9u5jFiMBNDUKRnKrky1m95F62n
 xXiS5vUiKdWpByMpfKmrqvJr6eS8SWq5z/yug1c3s1Y9T363KgfypgJLvNgbMGiv
 qbmjE+Zw65nMwHCk+4Rvq6s4aN6KosRZP0ABsn1foXt3kybSgemp5ShrlEyXohfS
 E91EiYxHFC4fdmuWiZZvL1tyHFeV25omyZA90mpkioNItiwoyOM2rfjfEfNq+WBw
 UrmdBesbGsF0Zi12CBa9LtzdRjYK8PugBWKW3mycS5++NX9KW6Ac/EpGqFeH9KgL
 WZ2v4aQjkbnzQKUB2HcWAyXm88G9MkNvpLbIrmIPtson+q0UjgPYWe5BI3dy/Y1v
 YS1JeseslVtSTKzGYsa1GJ7Nc1xYiILRz0RS4YGYXNjwvrl89i2UH7cglYDW36Xd
 vxvRBaFpVsj1mfjjITEoG6nE0v5aYH6gSITY79XR+/kN871/99/oIUaWdpjcm9yv
 SIYmK7ipcvxugkQ7BoMGbym/dvuUrZ+Vnf8dFlGPTJegZVsnfgrVAnRpvcVwW8+x
 4Z79wUPSIETRqj2XX2I/Y0JnrXry+dLLVyeK1tELoeOKev73Ai2lcqPSz6J0tzJs
 IErcz0hM1znL2RtgNwio
 =+EYB
 -----END PGP SIGNATURE-----

Merge tag 'mmc-updates-for-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.12:

  Core:
   - Support Allocation Units 8MB-64MB in SD3.0, previous max was 4MB.
   - The slot-gpio helper can now handle GPIO debouncing card-detect.
   - Read supported voltages from DT "voltage-ranges" property.

  Drivers:
   - dw_mmc: Add support for ARC architecture, and support exynos5420.
   - mmc_spi: Support CD/RO GPIOs.
   - sh_mobile_sdhi: Add compatibility for more Renesas SoCs.
   - sh_mmcif: Add DT support for DMA channels"

* tag 'mmc-updates-for-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (50 commits)
  Revert "mmc: tmio-mmc: Remove .set_pwr() callback from platform data"
  mmc: dw_mmc: Add support for ARC
  mmc: sdhci-s3c: initialize host->quirks2 for using quirks2
  mmc: sdhci-s3c: fix the wrong register value, when clock is disabled
  mmc: esdhc: add support to get voltage from device-tree
  mmc: sdhci: get voltage from sdhc host
  mmc: core: parse voltage from device-tree
  mmc: omap_hsmmc: use the generic config for omap2plus devices
  mmc: omap_hsmmc: clear status flags before starting a new command
  mmc: dw_mmc: exynos: Add a new compatible string for exynos5420
  mmc: sh_mmcif: revision-specific CLK_CTRL2 handling
  mmc: sh_mmcif: revision-specific Command Completion Signal handling
  mmc: sh_mmcif: add support for Device Tree DMA bindings
  mmc: sh_mmcif: move header include from header into .c
  mmc: SDHI: add DT compatibility strings for further SoCs
  mmc: dw_mmc-pci: enable bus-mastering mode
  mmc: dw_mmc-pci: get resources from a proper BAR
  mmc: tmio-mmc: Remove .set_pwr() callback from platform data
  mmc: tmio-mmc: Remove .get_cd() callback from platform data
  mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data
  ...
 2013-09-10 13:33:09 -07:00
Linus Torvalds 7426d62871 Add the ability to collect I/O statistics on user-defined regions of a 
device-mapper device.  This dm-stats code required the reintroduction of
 a div64_u64_rem() helper, but as a separate method that doesn't slow
 down div64_u64() -- especially on 32-bit systems.
 
 Allow the error target to replace request-based DM devices
 (e.g. multipath) in addition to bio-based DM devices.
 
 Various other small code fixes and improvements to thin-provisioning, DM
 cache and the DM ioctl interface.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJSLyNnAAoJEMUj8QotnQNaXVEIAKA1l43enaGiROBZEZXgAGUY
 1JUsnHES4ujyn/jtT39jPTQf9AW/rS4FUCrZiXG2aaNHXo7+7cdVoBHAiWc7mXad
 budBSqn47W7WDyFlQarKwsuYFcdLnqdnieRDMXQ1cN5dl4Rx61LclnsylQd4SSS0
 lznXkfOTquetDSuEPOuUHJDZufdacw3PpxWbTKGJld40fd7YZfGWQoG0ek1OeqqL
 fA30DTlYnkFyhheLCjFcDY6H55Rt7QpBWOUAa2XXLR6GLfk5iFK99autjWk2xTPT
 nppRwQrw9VH+HdW0jGLU+LRs1Y3nxwT9OBLWt9wav87Smdg/7jQAjwde9eKbO2k=
 =3ooH
 -----END PGP SIGNATURE-----

Merge tag 'dm-3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device-mapper updates from Mike Snitzer:
 "Add the ability to collect I/O statistics on user-defined regions of a
  device-mapper device.  This dm-stats code required the reintroduction
  of a div64_u64_rem() helper, but as a separate method that doesn't
  slow down div64_u64() -- especially on 32-bit systems.

  Allow the error target to replace request-based DM devices (e.g.
  multipath) in addition to bio-based DM devices.

  Various other small code fixes and improvements to thin-provisioning,
  DM cache and the DM ioctl interface"

* tag 'dm-3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm stripe: silence a couple sparse warnings
  dm: add statistics support
  dm thin: always return -ENOSPC if no_free_space is set
  dm ioctl: cleanup error handling in table_load
  dm ioctl: increase granularity of type_lock when loading table
  dm ioctl: prevent rename to empty name or uuid
  dm thin: set pool read-only if breaking_sharing fails block allocation
  dm thin: prefix pool error messages with pool device name
  dm: allow error target to replace bio-based and request-based targets
  math64: New separate div64_u64_rem helper
  dm space map: optimise sm_ll_dec and sm_ll_inc
  dm btree: prefetch child nodes when walking tree for a dm_btree_del
  dm btree: use pop_frame in dm_btree_del to cleanup code
  dm cache: eliminate holes in cache structure
  dm cache: fix stacking of geometry limits
  dm thin: fix stacking of geometry limits
  dm thin: add data block size limits to Documentation
  dm cache: add data block size limits to code and Documentation
  dm cache: document metadata device is exclussive to a cache
  dm: stop using WQ_NON_REENTRANT
 2013-09-10 13:06:15 -07:00
Linus Torvalds 4d7696f1b0 md update for v3.12 
Headline item is multithreading for RAID5 so that more
 IO/sec can be supported on fast (SSD) devices.
 Also TILE-Gx SIMD suppor for RAID6 calculations and an
 assortment of bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIVAwUAUi6dRTnsnt1WYoG5AQIqMBAAm/XUEqfyBNUiTPHmIU/OyReOlfsp8A2o
 xtcmSzaCtIUz4btPszUrw3PShqnk+lXXX2AB0rp3PzfOgyNYXBRKbzOf3eGr2VEp
 L/Cm0iSWHqQ7V7MoV5ZrqtvuyJV1a7FK3a3VaoKaUk424o4sZ7P67t/YZAnTCP/i
 9wQoPeIOJ8YjZsaAQjzI3q7yRMRE8ytyBnF4NdgeMyr2p17w2e9pnmNfCTo4wnWs
 Nu2wPr2QCPQXr/FoIhdIVEy3kVatqH8qXG8Fw+5n07HJYxGCvQZLDuoOVDYyFeoW
 gnNq2MMgLZm/7Nzqd1bN+QQZuBCd5JL4VJ2G4vLfYrn3ZSdSysrVKQXFKYG3Gkua
 1KP4Pv0hndAl4DtGbUk8CiZp6b+c5qeWvq+sO2NuhUGmumFMK2q4DJhITNexjmrs
 Eg4opnR8JMLDkYD6o52Ziu5KQR/q1PKRLj80eoVuqB2QQM5+NPb4s3k2WN+53lQD
 L9fH2alUxxSK+5R8ykk923QQ/XErMUwXaka+O/gGFAlYvaaW/GKTxFnKn/GIXAkc
 tKW88zB+zA5EZEFec+K43z1UjtGxMWsryvDN55ON2iV+LIZBISm7krroBeR55cyO
 +3tHlPsga0pO+9DdSm7hvZeWRrq5ZJTiZmL/e2FYygrC5tFAY0p+z49fK3e9Th13
 C85G7fg3yDY=
 =zLxh
 -----END PGP SIGNATURE-----

Merge tag 'md/3.12' of git://neil.brown.name/md

Pull md update from Neil Brown:
 "Headline item is multithreading for RAID5 so that more IO/sec can be
  supported on fast (SSD) devices.  Also TILE-Gx SIMD suppor for RAID6
  calculations and an assortment of bug fixes"

* tag 'md/3.12' of git://neil.brown.name/md:
  raid5: only wakeup necessary threads
  md/raid5: flush out all pending requests before proceeding with reshape.
  md/raid5: use seqcount to protect access to shape in make_request.
  raid5: sysfs entry to control worker thread number
  raid5: offload stripe handle to workqueue
  raid5: fix stripe release order
  raid5: make release_stripe lockless
  md: avoid deadlock when dirty buffers during md_stop.
  md: Don't test all of mddev->flags at once.
  md: Fix apparent cut-and-paste error in super_90_validate
  raid6/test: replace echo -e with printf
  RAID: add tilegx SIMD implementation of raid6
  md: fix safe_mode buglet.
  md: don't call md_allow_write in get_bitmap_file.
 2013-09-10 13:03:41 -07:00
Linus Torvalds b05430fc93 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 
Pull vfs pile 3 (of many) from Al Viro:
 "Waiman's conversion of d_path() and bits related to it,
  kern_path_mountpoint(), several cleanups and fixes (exportfs
  one is -stable fodder, IMO).

  There definitely will be more...  ;-/"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  split read_seqretry_or_unlock(), convert d_walk() to resulting primitives
  dcache: Translating dentry into pathname without taking rename_lock
  autofs4 - fix device ioctl mount lookup
  introduce kern_path_mountpoint()
  rename user_path_umountat() to user_path_mountpoint_at()
  take unlazy_walk() into umount_lookup_last()
  Kill indirect include of file.h from eventfd.h, use fdget() in cgroup.c
  prune_super(): sb->s_op is never NULL
  exportfs: don't assume that ->iterate() won't feed us too long entries
  afs: get rid of redundant ->d_name.len checks
 2013-09-10 12:44:24 -07:00
Dave Airlie 48016851c8 Merge tag 'drm-intel-fixes-2013-09-06' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes 
- Early stolen mem reservation from Jesse in x86 boot code. Acked by Ingo
  and hpa.  This was ready much earlier but somehow I've thought it'd go
  in through x86 trees, hence why this is late. Avoids the pci resource
  code to plant mmiobars in the middle of stolen mem and other ugliness.
- vgaarb improvements from Alex Williamson plus the fix from Ville for the
  vgacon->fbcon smooth transition "feature".
- Render pageflips on ivb/hsw to avoid stalls due to the ring switching
  when only flipping on the blitter (Chris).
- Deadlock fixes around our flush_workqueue which crept back in - lockdep
  isn't clever enough :(
- Shrinker recursion fix from Chris - this is the thing that blew the vma
  patches from Ben I've taken out of 3.12.
- Fixup for the relocation refactoring. Also an igt testcase to make sure
  we don't break this again.
- Pile of smaller fixups all over, shortlog has full details.

* tag 'drm-intel-fixes-2013-09-06' of git://people.freedesktop.org/~danvet/drm-intel: (29 commits)
  drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done
  drm/i915: try not to lose backlight CBLV precision
  drm/i915: Confine page flips to BCS on Valleyview
  drm/i915: Skip stolen region initialisation if none is reserved
  drm/i915: fix gpu hang vs. flip stall deadlocks
  drm/i915: Hold an object reference whilst we shrink it
  drm/i915: fix i9xx_crtc_clock_get for multiplied pixels
  drm/i915: handle sdvo input pixel multiplier correctly again
  drm/i915: fix hpd work vs. flush_work in the pageflip code deadlock
  drm/i915: fix up the relocate_entry refactoring
  drm/i915: Fix pipe config warnings when dealing with LVDS fixed mode
  drm/i915: Don't call sg_free_table() if sg_alloc_table() fails
  i915: Update VGA arbiter support for newer devices
  vgaarb: Fix VGA decodes changes
  vgaarb: Don't disable resources that are not owned
  drm/i915: Pin pages whilst mapping the dma-buf
  drm/i915: enable trickle feed on Haswell
  x86: add early quirk for reserving Intel graphics stolen memory v5
  drm/i915: split PCI IDs out into i915_drm.h v4
  i915_gem: Convert kmem_cache_alloc(...GFP_ZERO) to kmem_cache_zalloc
  ...
 2013-09-10 12:36:55 +10:00
Linus Torvalds 26b0332e30 dmaengine update for 3.12 
Collection of random updates to the core and some end-driver fixups for
 ioatdma and mv_xor:
 * NUMA aware channel allocation
 * Cleanup dmatest debugfs interface
 * ioat: make raid-support Atom only
 * mv_xor: big endian
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSLmLbAAoJEB7SkWpmfYgCIHoQAK/RmD0fnK+NsqoPpKVqeo/q
 4YL/+DNBwhC1edx5yD0+cyGydcd4Z74RdaoMJJg4naDhY4jjsBetNGJA7qH4ynbu
 LrPesxF1g9Ayhgk5sFzGU66Bg1/SpaQA37/wCVbJI0fO84ZZy+snSBv6wEKCYdRo
 Ot/65pB5zdbQd1zdESi3v9w9TFIRVYmMlKMoxfxjDdoTG+yI7R3ShICbSa2AS2zs
 yOJA2kgMpQvwdufZCLqwfWzrHD9fwLEv8IxNKSdbUD63JUZwCb7kQ88D1S6VqeUV
 EurcPiFjDckGpyZX+4rgB6/8iym4x41t1gFcsR65FlKxHtdcdsjTeFGsSbcIrzAi
 FM5S+C5eJMGkEpWZWAQXHatkc5R7fr2eljSWeGomEECWhcPUBNmqJ2p55jCDj2Ex
 4SV8wZRID1pcqOwMec/B7nSNzALBXMXh5sSGp9T74+dwZ0OLoHQ1aOmJzl2tDiL7
 OF6si7XYgecYOnINDck4AAb6JfQKRIz+zFt18tIJbYL2F5yTumJD0Bw4DaeU0Zfy
 muUMzWJJKuoQtYMs4CeD0HzsbhZH0jieTgrXXrHpCXFLxVTeVmVcxerfvXWanqrP
 glMwDLcC4Dg+7JPiz8IGp9wcPppQqzOk7PS4ibPG5X0pm+SWUxL1Qd/0v5xnRcjN
 HK17pMXS0oTFfcTl20qe
 =ldij
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine

Pull dmaengine update from Dan Williams:
 "Collection of random updates to the core and some end-driver fixups
  for ioatdma and mv_xor:
   - NUMA aware channel allocation
   - Cleanup dmatest debugfs interface
   - ioat: make raid-support Atom only
   - mv_xor: big endian

  Aside from the top three commits these have all had some soak time in
  -next.  The top commit fixes a recent build breakage.

  It has been a long while since my last pull request, hopefully it does
  not show.  Thanks to Vinod for keeping an eye on drivers/dma/ this
  past year"

* tag 'dmaengine-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine:
  dmaengine: dma_sync_wait and dma_find_channel undefined
  MAINTAINERS: update email for Dan Williams
  dma: mv_xor: Fix incorrect error path
  ioatdma: silence GCC warnings
  dmaengine: make dma_channel_rebalance() NUMA aware
  dmaengine: make dma_submit_error() return an error code
  ioatdma: disable RAID on non-Atom platforms and reenable unaligned copies
  mv_xor: support big endian systems using descriptor swap feature
  mv_xor: use {readl, writel}_relaxed instead of __raw_{readl, writel}
  dmatest: print message on debug level in case of no error
  dmatest: remove IS_ERR_OR_NULL checks of debugfs calls
  dmatest: make module parameters writable
 2013-09-09 18:07:15 -07:00
Rafael J. Wysocki 798282a871 Revert "cpufreq: make sure frequency transitions are serialized" 
Commit 7c30ed5 (cpufreq: make sure frequency transitions are
serialized) attempted to serialize frequency transitions by
adding checks to the CPUFREQ_PRECHANGE and CPUFREQ_POSTCHANGE
notifications.  However, it assumed that the notifications will
always originate from the driver's .target() callback, but they
also can be triggered by cpufreq_out_of_sync() and that leads to
warnings like this on some systems:

 WARNING: CPU: 0 PID: 14543 at drivers/cpufreq/cpufreq.c:317
 __cpufreq_notify_transition+0x238/0x260()
 In middle of another frequency transition

accompanied by a call trace similar to this one:

 [<ffffffff81720daa>] dump_stack+0x46/0x58
 [<ffffffff8106534c>] warn_slowpath_common+0x8c/0xc0
 [<ffffffff815b8560>] ? acpi_cpufreq_target+0x320/0x320
 [<ffffffff81065436>] warn_slowpath_fmt+0x46/0x50
 [<ffffffff815b1ec8>] __cpufreq_notify_transition+0x238/0x260
 [<ffffffff815b33be>] cpufreq_notify_transition+0x3e/0x70
 [<ffffffff815b345d>] cpufreq_out_of_sync+0x6d/0xb0
 [<ffffffff815b370c>] cpufreq_update_policy+0x10c/0x160
 [<ffffffff815b3760>] ? cpufreq_update_policy+0x160/0x160
 [<ffffffff81413813>] cpufreq_set_cur_state+0x8c/0xb5
 [<ffffffff814138df>] processor_set_cur_state+0xa3/0xcf
 [<ffffffff8158e13c>] thermal_cdev_update+0x9c/0xb0
 [<ffffffff8159046a>] step_wise_throttle+0x5a/0x90
 [<ffffffff8158e21f>] handle_thermal_trip+0x4f/0x140
 [<ffffffff8158e377>] thermal_zone_device_update+0x57/0xa0
 [<ffffffff81415b36>] acpi_thermal_check+0x2e/0x30
 [<ffffffff81415ca0>] acpi_thermal_notify+0x40/0xdc
 [<ffffffff813e7dbd>] acpi_device_notify+0x19/0x1b
 [<ffffffff813f8241>] acpi_ev_notify_dispatch+0x41/0x5c
 [<ffffffff813e3fbe>] acpi_os_execute_deferred+0x25/0x32
 [<ffffffff81081060>] process_one_work+0x170/0x4a0
 [<ffffffff81082121>] worker_thread+0x121/0x390
 [<ffffffff81082000>] ? manage_workers.isra.20+0x170/0x170
 [<ffffffff81088fe0>] kthread+0xc0/0xd0
 [<ffffffff81088f20>] ? flush_kthread_worker+0xb0/0xb0
 [<ffffffff8173582c>] ret_from_fork+0x7c/0xb0
 [<ffffffff81088f20>] ? flush_kthread_worker+0xb0/0xb0

For this reason, revert commit 7c30ed5 along with the fix 266c13d
(cpufreq: Fix serialization of frequency transitions) on top of it
and we will revisit the serialization problem later.

Reported-by: Alessandro Bono <alessandro.bono@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2013-09-10 02:54:50 +02:00
Srivatsa S. Bhat 56d07db274 cpufreq: Remove temporary fix for race between CPU hotplug and sysfs-writes 
Commit "cpufreq: serialize calls to __cpufreq_governor()" had been a temporary
and partial solution to the race condition between writing to a cpufreq sysfs
file and taking a CPU offline. Now that we have a proper and complete solution
to that problem, remove the temporary fix.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2013-09-10 02:49:47 +02:00
Viresh Kumar 19c763031a cpufreq: serialize calls to __cpufreq_governor() 
We can't take a big lock around __cpufreq_governor() as this causes
recursive locking for some cases. But calls to this routine must be
serialized for every policy. Otherwise we can see some unpredictable
events.

For example, consider following scenario:

__cpufreq_remove_dev()
 __cpufreq_governor(policy, CPUFREQ_GOV_STOP);
   policy->governor->governor(policy, CPUFREQ_GOV_STOP);
    cpufreq_governor_dbs()
     case CPUFREQ_GOV_STOP:
      mutex_destroy(&cpu_cdbs->timer_mutex)
      cpu_cdbs->cur_policy = NULL;
  <PREEMPT>
store()
 __cpufreq_set_policy()
  __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS);
    policy->governor->governor(policy, CPUFREQ_GOV_LIMITS);
     case CPUFREQ_GOV_LIMITS:
      mutex_lock(&cpu_cdbs->timer_mutex); <-- Warning (destroyed mutex)
       if (policy->max < cpu_cdbs->cur_policy->cur) <- cur_policy == NULL

And so store() will eventually result in a crash if cur_policy is
NULL at this point.

Introduce an additional variable which would guarantee serialization
here.

Reported-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2013-09-10 02:49:46 +02:00
Jon Mason 4a43f394a0 dmaengine: dma_sync_wait and dma_find_channel undefined 
dma_sync_wait and dma_find_channel are declared regardless of whether
CONFIG_DMA_ENGINE is enabled, but calling the function without
CONFIG_DMA_ENGINE enabled results "undefined reference" errors.

To get around this, declare dma_sync_wait and dma_find_channel as inline
functions if CONFIG_DMA_ENGINE is undefined.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
 2013-09-09 17:02:38 -07:00
Linus Torvalds 6404141718 ARM: SoC late changes for v3.12 
These are changes that arrived a little late before the merge window,
 or had dependencies on previous branches.
 
 Highlights:
 - ux500: misc. cleanup, fixup I2C devices
 - exynos: DT updates for RTC; PM updates
 - at91: DT updates for NAND; new platforms added to generic defconfig
 - sunxi: DT updates: cubieboard2, pinctrl driver, gated clocks
 - highbank: LPAE fixes, select necessary ARM errata
 - omap: PM fixes and improvements; OMAP5 mailbox support
 - omap: basic support for new DRA7xx SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSLkf1AAoJEFk3GJrT+8ZlF7oP/AyxrdRFyC1YmuOqzFH0/JTQ
 EVBmMBiH+f1IKBT6YRkWCzX4JI5oOi+2DhrM6d/UPfbpr6pwd8dptuPiyLuBBUEm
 byNbiJEYHidm23oFpKM+89tTHXbBrrz8XQN2xLwYhNr24QkVAsLTxyOjVA7KJM59
 tk1tPQzO1ORyiFd485eQa3V4z98JgcE3QFNthbS7Y72wEXBzMZQDc9nFaoIJ5mHW
 nzJSZyV24ibeEJeM2nsc7a3OvCyUfAQaO5Cio2UvdkGzZcmtxjxc1LjHa4VjIL6h
 hwz+gqIOfl3hXotbjJxTp9+Ezt4TGU5bB3NUweE1btHE/KIEu0bx4hSsOz/kooA9
 2JL8BCCTx+KiGiNHmNCcT679n9q11iOwqOWvxxhcJFkiV/6+mkjwTD9TNwR1q+RG
 +LtOZr9tMcu2v/DbAivDYKiROmNCZhxpn35DoUKpBy73SOvJOiTLtSYitVN/tyM3
 nWLEP5aTf3NwrWr8nFFws6ycwhgTCX0ITbdFD/fMlLMamHYPkckJ/0NXXOxfGiLk
 kCMbdrCX4YTbCftmAQhrbdaPJVnE/SZI3CTJfutj8eX6NC2fm/U7Hcf5PI+W0Igd
 moN/PaUULpVZI5hUrADyU1HCQnA97pv0biYVwzW5pBIt2u9tzUritabuERxPt9fa
 SdHj0+u+xq9d3y35Oq46
 =NIZZ
 -----END PGP SIGNATURE-----

Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Kevin Hilman:
 "These are changes that arrived a little late before the merge window,
  or had dependencies on previous branches.

  Highlights:
   - ux500: misc.  cleanup, fixup I2C devices
   - exynos: DT updates for RTC; PM updates
   - at91: DT updates for NAND; new platforms added to generic defconfig
   - sunxi: DT updates: cubieboard2, pinctrl driver, gated clocks
   - highbank: LPAE fixes, select necessary ARM errata
   - omap: PM fixes and improvements; OMAP5 mailbox support
   - omap: basic support for new DRA7xx SoCs"

* tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  ARM: dts: vexpress: Add CCI node to TC2 device-tree
  ARM: EXYNOS: Skip C1 cpuidle state for exynos5440
  ARM: EXYNOS: always enable PM domains support for EXYNOS4X12
  ARM: highbank: clean-up some unused includes
  ARM: sun7i: Enable the A20 clocks in the DTSI
  ARM: sun6i: Enable clock support in the DTSI
  ARM: sun5i: dt: Use the A10s gates in the DTSI
  ARM: at91: at91_dt_defconfig: enable rm9200 support
  ARM: dts: add ADC device tree node for exynos5420/5250
  ARM: dts: Add RTC DT node to Exynos5420 SoC
  ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC
  ARM: dts: Fix the RTC DT node name for Exynos5250
  irqchip: mmp: avoid to include irqs head file
  ARM: mmp: avoid to include head file in mach-mmp
  irqchip: mmp: support irqchip
  irqchip: move mmp irq driver
  ARM: OMAP: AM33xx: clock: Add RNG clock data
  ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX
  ARM: OMAP4: clock: Lock PLLs in the right sequence
  ARM: OMAP: AM33XX: hwmod: Add hwmod data for debugSS
  ...
 2013-09-09 16:35:29 -07:00
Linus Torvalds a35c6322e5 ARM: SoC drivers for v3.12 
This branch contains ARM SoC related driver updates for v3.12.  The
 only thing this cycle are core PM updates and CPUidle support for
 ARM's TC2 big.LITTLE development platform.
 
 Conflicts:
 
 One cleanup/reorg conflict with a new entry in
 drivers/cpuidle/Makefile.  Append the new entry after the existing
 ones.  A follow up patch for v3.12-rc will make the new entry conform
 to the cleanup/reorg.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSLjatAAoJEFk3GJrT+8Zl32sP/Aw2iEXd/5DUvcp6y/qZoAjO
 oLhCPviEnQCpz4smFFySBLvvKyVyA7oOMet8nelIJhwHCTNMBpJZHIfcvpIP5uBY
 6LLpFUw4m7TqOISwpVXlwc/3CuG76QCrITLJmButq6tHF4udHeAur+pAnNHoaoys
 O5arRMLvl5C4rREeiZctTv5JARICCxIcHpweQdtt+MZ03yG78fEfSB9XxvyOlhh0
 OJnGcqU07fIXw9kT/9KAnR3Ql7JJsdzlXqLq6/wFWPe5a1KtgxHNXPbtWaxl8JWW
 cPSQci+n9iWgxKzoQTGyQO6sfkDHcol3izMeCScMwlx05SMPwofXpYitaPHLF1cy
 PtJosSMVQvJPrHyGlY4vhD9mtCIcyOmlwSlZ6dOf7oqXMhT9CPJe2UD/8JZWgXBi
 imY/vpU8mgZT315rQmc/Khg721VNKcSuIvP6xUS9PuaSMUrPSCJFbbkckHGnzdC7
 XVFCui9gFxa7vMN+CzrZRqfZnjJ7ujuiFDauMzltu0iBiPNXkAfyoqbxMqUP1HJ5
 pdU84vuEVjsUdWt9ivJs6I6cqIwroeji9HZzZnWkWyoDgtAjxhDFVXydqlhrZsuJ
 O3uErP8fjRtloFa2iLDZfawPpHDFsY4F+Nm09rZLO7RE4ELlYlQGfYEwuIh+kZ16
 nLPE/V5DYrBVyNGDouKx
 =FvQD
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver update from Kevin Hilman:
 "This contains the ARM SoC related driver updates for v3.12.  The only
  thing this cycle are core PM updates and CPUidle support for ARM's TC2
  big.LITTLE development platform"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  cpuidle: big.LITTLE: vexpress-TC2 CPU idle driver
  ARM: vexpress: tc2: disable GIC CPU IF in tc2_pm_suspend
  drivers: irq-chip: irq-gic: introduce gic_cpu_if_down()
 2013-09-09 16:08:13 -07:00
Linus Torvalds bef4a0ab98 The common clk framework changes for 3.12 are dominated by clock driver 
patches, both new drivers and fixes to existing. A high percentage of
 these are for Samsung platforms like Exynos. Core framework fixes and
 some new features like automagical clock re-parenting round out the
 patches.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSLkImAAoJEDqPOy9afJhJOjsP/Ri26AW7XB9pPWJRSU9REBZA
 31wxcFo2T+PNir9duwDwjFBFycC3MisaKFlg7D134M+7txbYqm1TRvfu9OEDxpSP
 4b/Yl6TarN4dhCN2R+BREO8PnxCBVpspDcsdh6Esuwuet2xUom3UtN8yvSjhPP/u
 qGNmXQYXyQy4fom5r+GsDVW+HIhLkaX9b0fYc9EN/bqfgv94PMZAxAxsK9CroAGZ
 0m0g9ZXw9iSvVfz+iQEqPINtvpTLHk0FGyimoSR7kvW4o4o47tVtLEWp7VjG6mr5
 zvBsycaQq6NgxPu96iUWWhsO9Uj2I7/7JgidXF7r+wvEFs1mcgZtkkirSA/n4zUN
 C8a87rvQrZRLr+xXhVuqiVHCgCY8vXoHqkWg6SrZ62ORL8C7uYRpog5SEe2ZzLJX
 l5uGAsDM6el+Uc/YviCPoZbeFr3h3CQvvFo8+i2eN0v/Phf30rq4lotBvpQj894G
 ngEIMj+D8wshdYSF2dNJ0rLnkLHTgCbiA28L6Cl5TRzRMj3Uaj9aT3cmoLUnimZu
 7F7nWU4Iu/vzQKCTQ+eTvwxXJqIlE0JeVbJilqH1f2a68JdXP1LOId+2w/CP8gqQ
 i2odj6JHMgBzM9rNs+y0Ir9X/bXIVi6F341c19Nl15srEiLLl8xQIpcPDaI/Kvzs
 pefYgF2yS5AZAW3ac90r
 =5GfA
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-3.12' of git://git.linaro.org/people/mturquette/linux

Pull clock framework changes from Michael Turquette:
 "The common clk framework changes for 3.12 are dominated by clock
  driver patches, both new drivers and fixes to existing.  A high
  percentage of these are for Samsung platforms like Exynos.  Core
  framework fixes and some new features like automagical clock
  re-parenting round out the patches"

* tag 'clk-for-linus-3.12' of git://git.linaro.org/people/mturquette/linux: (102 commits)
  clk: only call get_parent if there is one
  clk: samsung: exynos5250: Simplify registration of PLL rate tables
  clk: samsung: exynos4: Register PLL rate tables for Exynos4x12
  clk: samsung: exynos4: Register PLL rate tables for Exynos4210
  clk: samsung: exynos4: Reorder registration of mout_vpllsrc
  clk: samsung: pll: Add support for rate configuration of PLL46xx
  clk: samsung: pll: Use new registration method for PLL46xx
  clk: samsung: pll: Add support for rate configuration of PLL45xx
  clk: samsung: pll: Use new registration method for PLL45xx
  clk: samsung: exynos4: Rename exynos4_plls to exynos4x12_plls
  clk: samsung: exynos4: Remove checks for DT node
  clk: samsung: exynos4: Remove unused static clkdev aliases
  clk: samsung: Modify _get_rate() helper to use __clk_lookup()
  clk: samsung: exynos4: Use separate aliases for cpufreq related clocks
  clocksource: samsung_pwm_timer: Get clock from device tree
  ARM: dts: exynos4: Specify PWM clocks in PWM node
  pwm: samsung: Update DT bindings documentation to cover clocks
  clk: Move symbol export to proper location
  clk: fix new_parent dereference before null check
  clk: wm831x: Initialise wm831x pointer on init
  ...
 2013-09-09 15:49:04 -07:00
Nicholas Bellinger 0123a9ec6a target: Add MAXIMUM COMPARE AND WRITE LENGTH in Block Limits VPD 
This patch adds the MAXIMUM COMPARE AND WRITE LENGTH bit, currently
hardcoded to a single logical block (NoLB=1) within the Block Limits
VPD in spc_emulate_evpd_b0().

Also add emulate_caw device attribute in configfs (enabled by default)
to allow the exposure of this bit to be disabled, if necessary.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
 2013-09-09 14:29:35 -07:00
Nicholas Bellinger 76dde50ebe target: Make __target_execute_cmd() available as extern 
Required by COMPARE_AND_WRITE for write instance user-data
submission, in order to bypass target_execute_cmd() checks.

Reported-by: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
 2013-09-09 14:29:34 -07:00
Nicholas Bellinger 47e459e622 target: Add transport_reset_sgl_orig() for COMPARE_AND_WRITE 
After COMPARE_AND_WRITE completes it's comparision, the WRITE
payload SGLs head expect to be updated to point from the verify
instance of user data, to the write instance of user data.

So for this special case, add transport_reset_sgl_orig() usage
within transport_free_pages() and add se_cmd->t_data_[sg,nents]_orig
members to save the original assignments.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
 2013-09-09 14:29:33 -07:00
Nicholas Bellinger a82a9538dd target: Allow sbc_ops->execute_rw() to accept SGLs + data_direction 
COMPARE_AND_WRITE expects to be able to send down a DMA_FROM_DEVICE
to obtain the necessary READ payload for comparision against the
first half of the WRITE payload containing the verify user data.

Currently virtual backends expect to internally reference SGLs,
SGL nents, and data_direction, so change IBLOCK, FILEIO and RD
sbc_ops->execute_rw() to accept this values as function parameters.

Also add default sbc_execute_rw() handler for the typical case for
cmd->execute_rw() submission using cmd->t_data_sg, cmd->t_data_nents,
and cmd->data_direction).

v2 Changes:
  - Add SCF_COMPARE_AND_WRITE command flag
  - Use sbc_execute_rw() for normal cmd->execute_rw() submission
    with expected se_cmd members.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
 2013-09-09 14:29:28 -07:00
Nicholas Bellinger 818b571ca0 target: Add TCM_MISCOMPARE_VERIFY sense handling 
This patch adds TCM_MISCOMPARE_VERIFY (ASC=0x1d, ASCQ=0x00) sense
handling to transport_send_check_condition_and_sense(), which is
required for a COMPARE_AND_WRITE comparision failure.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
 2013-09-09 14:29:27 -07:00
Nicholas Bellinger a6b0133c19 target: Add return for se_cmd->transport_complete_callback 
This patch adds a sense_reason_t return to ->transport_complete_callback(),
and updates target_complete_ok_work() to invoke the call if necessary to
transport_send_check_condition_and_sense() during the failure case.

Also update xdreadwrite_callback() to use this return value.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
 2013-09-09 14:29:26 -07:00
Nicholas Bellinger 1c68cc1626 scsi: Add CDB definition for COMPARE_AND_WRITE 
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
 2013-09-09 14:29:24 -07:00
Nicholas Bellinger d703ce2f7f iscsi/iser-target: Convert to command priv_size usage 
This command converts iscsi/isert-target to use allocations based on
iscsit_transport->priv_size within iscsit_allocate_cmd(), instead of
using an embedded isert_cmd->iscsi_cmd.

This includes removing iscsit_transport->alloc_cmd() usage, along
with updating isert-target code to use iscsit_priv_cmd().

Also, remove left-over iscsit_transport->release_cmd() usage for
direct calls to iscsit_release_cmd(), and drop the now unused
lio_cmd_cache and isert_cmd_cache.

Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
 2013-09-09 14:29:21 -07:00
Nicholas Bellinger c0add7fd05 target: Add transport_init_session_tags using per-cpu ida 
This patch adds lib/idr.c based transport_init_session_tags() logic
that allows fabric drivers to setup a per-cpu se_sess->sess_tag_pool
and associated se_sess->sess_cmd_map for basic tagged pre-allocation
of fabric descriptor sized memory.

v5 changes:
  - Convert to percpu_ida.h include

v4 changes:
  - Add transport_alloc_session_tags() for fabrics that need early
    transport_init_session()

v3 changes:
  - Update to percpu-ida usage

Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Asias He <asias@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Asias He <asias@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
 2013-09-09 14:29:16 -07:00
Kent Overstreet 798ab48eec idr: Percpu ida 
Percpu frontend for allocating ids. With percpu allocation (that works),
it's impossible to guarantee it will always be possible to allocate all
nr_tags - typically, some will be stuck on a remote percpu freelist
where the current job can't get to them.

We do guarantee that it will always be possible to allocate at least
(nr_tags / 2) tags - this is done by keeping track of which and how many
cpus have tags on their percpu freelists. On allocation failure if
enough cpus have tags that there could potentially be (nr_tags / 2) tags
stuck on remote percpu freelists, we then pick a remote cpu at random to
steal from.

Note that there's no cpu hotplug notifier - we don't care, because
steal_tags() will eventually get the down cpu's tags. We _could_ satisfy
more allocations if we had a notifier - but we'll still meet our
guarantees and it's absolutely not a correctness issue, so I don't think
it's worth the extra code.

From akpm:

    "It looks OK to me (that's as close as I get to an ack :))

v6 changes:
  - Add #include <linux/cpumask.h> to include/linux/percpu_ida.h to
    make alpha/arc builds happy (Fengguang)
  - Move second (cpu >= nr_cpu_ids) check inside of first check scope
    in steal_tags() (akpm + nab)

v5 changes:
  - Change percpu_ida->cpus_have_tags to cpumask_t (kmo + akpm)
  - Add comment for percpu_ida_cpu->lock + ->nr_free (kmo + akpm)
  - Convert steal_tags() to use cpumask_weight() + cpumask_next() +
    cpumask_first() + cpumask_clear_cpu() (kmo + akpm)
  - Add comment for alloc_global_tags() (kmo + akpm)
  - Convert percpu_ida_alloc() to use cpumask_set_cpu() (kmo + akpm)
  - Convert percpu_ida_free() to use cpumask_set_cpu() (kmo + akpm)
  - Drop percpu_ida->cpus_have_tags allocation in percpu_ida_init()
    (kmo + akpm)
  - Drop percpu_ida->cpus_have_tags kfree in percpu_ida_destroy()
    (kmo + akpm)
  - Add comment for percpu_ida_alloc @ gfp (kmo + akpm)
  - Move to percpu_ida.c + percpu_ida.h (kmo + akpm + nab)

v4 changes:

  - Fix tags.c reference in percpu_ida_init (akpm)

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
 2013-09-09 14:29:15 -07:00
Linus Torvalds 300893b08f xfs: update for v3.12-rc1 
For 3.12-rc1 there are a number of bugfixes in addition to work to ease usage
 of shared code between libxfs and the kernel, the rest of the work to enable
 project and group quotas to be used simultaneously, performance optimisations
 in the log and the CIL, directory entry file type support, fixes for log space
 reservations, some spelling/grammar cleanups, and the addition of user
 namespace support.
 
 - introduce readahead to log recovery
 - add directory entry file type support
 - fix a number of spelling errors in comments
 - introduce new Q_XGETQSTATV quotactl for project quotas
 - add USER_NS support
 - log space reservation rework
 - CIL optimisations
 - kernel/userspace libxfs rework
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJSLeikAAoJENaLyazVq6ZOciEP/3tc850sQsPlNwP9aqd1l2Wk
 S1RJ8i+MUQ2W/PlbswCXvdUCT8DIwXWxL31tGvi8vtaLhh6t8ICSZwqNil+/GCIJ
 BErVvY4oXhEMHhlbIRRvpxblTfJGiYy3puUEz9VI0yDdUVnC33+DuEeLTQ/0mibo
 /UUqKFmM3KYpOc8vIQvH5K5i8PkjtMt9yge0k4l9COD30gtY2okkaD4b1voOsKc+
 5YFqulq7zcXBUYti+EFCQeV8aUBTGEPN4PJRdcS12/ylzsTzZivAOO+QREu7qBW8
 x+Gj8fOC+yYWCttmJlfa1n8taxge3ndEuzKN97nvvfQgjvvunMvwJ499skryYVdB
 EcPnBnpDUQuz/y7exKBT9uROK817vZBtfHzSova29ayQSWC+qDpNE4xXeDIqeCtT
 CPxdHuWMOvIdZg41E4x7je0elaZl8EAZ8hycc2WuRhtukEkIdE1O8aD7IVrMYee8
 kg+aVHG5nmYRInO1WuMinbtiCzwvVoBJToWM3y4cbfgW0dILASRyL53HDd+eCr1j
 kOpPIVgXlBZgiPMmdYahWxyVVWcE7zyex0w4frzWVlJMZ4lP5brppD6qfQg1JwOB
 z21Y95F5C2GxSyN/Lwps0G6jujHrpe6GVeYK7uKCtnqTD83nSShv5Naln7pQ3AUs
 qUMsqmJob4+bwt94Xgbx
 =V4s4
 -----END PGP SIGNATURE-----

Merge tag 'xfs-for-linus-v3.12-rc1' of git://oss.sgi.com/xfs/xfs

Pull xfs updates from Ben Myers:
 "For 3.12-rc1 there are a number of bugfixes in addition to work to
  ease usage of shared code between libxfs and the kernel, the rest of
  the work to enable project and group quotas to be used simultaneously,
  performance optimisations in the log and the CIL, directory entry file
  type support, fixes for log space reservations, some spelling/grammar
  cleanups, and the addition of user namespace support.

   - introduce readahead to log recovery
   - add directory entry file type support
   - fix a number of spelling errors in comments
   - introduce new Q_XGETQSTATV quotactl for project quotas
   - add USER_NS support
   - log space reservation rework
   - CIL optimisations
  - kernel/userspace libxfs rework"

* tag 'xfs-for-linus-v3.12-rc1' of git://oss.sgi.com/xfs/xfs: (112 commits)
  xfs: XFS_MOUNT_QUOTA_ALL needed by userspace
  xfs: dtype changed xfs_dir2_sfe_put_ino to xfs_dir3_sfe_put_ino
  Fix wrong flag ASSERT in xfs_attr_shortform_getvalue
  xfs: finish removing IOP_* macros.
  xfs: inode log reservations are too small
  xfs: check correct status variable for xfs_inobt_get_rec() call
  xfs: inode buffers may not be valid during recovery readahead
  xfs: check LSN ordering for v5 superblocks during recovery
  xfs: btree block LSN escaping to disk uninitialised
  XFS: Assertion failed: first <= last && last < BBTOB(bp->b_length), file: fs/xfs/xfs_trans_buf.c, line: 568
  xfs: fix bad dquot buffer size in log recovery readahead
  xfs: don't account buffer cancellation during log recovery readahead
  xfs: check for underflow in xfs_iformat_fork()
  xfs: xfs_dir3_sfe_put_ino can be static
  xfs: introduce object readahead to log recovery
  xfs: Simplify xfs_ail_min() with list_first_entry_or_null()
  xfs: Register hotcpu notifier after initialization
  xfs: add xfs sb v4 support for dirent filetype field
  xfs: Add write support for dirent filetype field
  xfs: Add read-only support for dirent filetype field
  ...
 2013-09-09 11:19:09 -07:00
Josh Durgin dd935f44a4 libceph: add function to ensure notifies are complete 
Without a way to flush the osd client's notify workqueue, a watch
event that is unregistered could continue receiving callbacks
indefinitely.

Unregistering the event simply means no new notifies are added to the
queue, but there may still be events in the queue that will call the
watch callback for the event. If the queue is flushed after the event
is unregistered, the caller can be sure no more watch callbacks will
occur for the canceled watch.

Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
 2013-09-09 11:15:49 -07:00
Linus Torvalds ef9a61bef9 - factor out common code from MTD tests 
- nand-gpio cleanup and portability to non-ARM
  - m25p80 support for 4-byte addressing chips, other new chips
  - pxa3xx cleanup and support for new platforms
  - remove obsolete alauda, octagon-5066 drivers
  - erase/write support for bcm47xxsflash
  - improve detection of ECC requirements for NAND, controller setup
  - NFC acceleration support for atmel-nand, read/write via SRAM
  - etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iEYEABECAAYFAlIt3VsACgkQdwG7hYl686NKBQCgqFzV1S+TiXZSjbqanK0374Hu
 lMIAoI2IOQb1bgQFSqaOzgSaBmVhLtMc
 =xWBt
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20130909' of git://git.infradead.org/linux-mtd

Pull mtd updates from David Woodhouse:
 - factor out common code from MTD tests
 - nand-gpio cleanup and portability to non-ARM
 - m25p80 support for 4-byte addressing chips, other new chips
 - pxa3xx cleanup and support for new platforms
 - remove obsolete alauda, octagon-5066 drivers
 - erase/write support for bcm47xxsflash
 - improve detection of ECC requirements for NAND, controller setup
 - NFC acceleration support for atmel-nand, read/write via SRAM
 - etc

* tag 'for-linus-20130909' of git://git.infradead.org/linux-mtd: (184 commits)
  mtd: chips: Add support for PMC SPI Flash chips in m25p80.c
  mtd: ofpart: use for_each_child_of_node() macro
  mtd: mtdswap: replace strict_strtoul() with kstrtoul()
  mtd cs553x_nand: use kzalloc() instead of memset
  mtd: atmel_nand: fix error return code in atmel_nand_probe()
  mtd: bcm47xxsflash: writing support
  mtd: bcm47xxsflash: implement erasing support
  mtd: bcm47xxsflash: convert to module_platform_driver instead of init/exit
  mtd: bcm47xxsflash: convert kzalloc to avoid invalid access
  mtd: remove alauda driver
  mtd: nand: mxc_nand: mark 'const' properly
  mtd: maps: cfi_flagadm: add missing __iomem annotation
  mtd: spear_smi: add missing __iomem annotation
  mtd: r852: Staticize local symbols
  mtd: nandsim: Staticize local symbols
  mtd: impa7: add missing __iomem annotation
  mtd: sm_ftl: Staticize local symbols
  mtd: m25p80: add support for mr25h10
  mtd: m25p80: make CONFIG_M25PXX_USE_FAST_READ safe to enable
  mtd: m25p80: Pass flags through CAT25_INFO macro
  ...
 2013-09-09 10:33:19 -07:00
Linus Torvalds 64c353864e Merge branch 'for-v3.12' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping 
Pull DMA mapping update from Marek Szyprowski:
 "This contains an addition of Device Tree support for reserved memory
  regions (Contiguous Memory Allocator is one of the drivers for it) and
  changes required by the KVM extensions for PowerPC architectue"

* 'for-v3.12' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: init: add support for reserved memory defined by device tree
  drivers: of: add initialization code for dma reserved memory
  drivers: of: add function to scan fdt nodes given by path
  drivers: dma-contiguous: clean source code and prepare for device tree
 2013-09-09 10:26:33 -07:00
Linus Torvalds d75671e36e VFIO updates include safer default file flags for VFIO device fds, 
an external user interface exported to allow other modules to hold
 references to VFIO groups, a fix to test for extended config space
 on PCIe and PCI-x, and new hot reset interfaces for PCI devices
 which allows the user to do PCI bus/slot resets when all of the
 devices affected by the reset are owned by the user.
 
 For this last feature, the PCI bus reset interface, I depend on
 changes already merged from Bjorn's PCI pull request.  I therefore
 merged my tree up to commit cb3e433, which I think was the correct
 action, but as Stephen Rothwell noted, I failed to provide a commit
 message indicating why the merge was required.  Sorry for that.
 Thanks,
 Alex
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJSLKr0AAoJECObm247sIsiouMP/1rym/JDjSsjIONvjnQEH5hk
 aZy3gGjqvSBBSN2aWqYkEgsSmgh4lSdDAbSBpY6vfz4Q0h7OXhSZcZ5oG2eGECia
 rN6GvfI/g2mYBCHJbS30bEkpljx9ssMZi7n9dnWOWEkzXSTC/uLHx9DCUiHdczPF
 SEeEHbxAnCTL5S5SQgUwhjPI813eVPjm94KDZK6pHcd14GGtM/piGjJNkyfzymRZ
 0l7lu95YaY70qL1Bk1EZ2TlsqWtYeKfDXsp465U3uBj5eXslMKpxXBn/XndRWu25
 ZnjRitF/izMZdcBgIM4uVK/yDhdAI2qav1rtkVirqp9Qrs9BgJXxUpO3p0e/GhFl
 KZgq3DnE1aUfJlyu+YGmjIKWDT+CBrkkxidRwYoaBCs3if/1E19zUH5Gfuuimy/D
 rpET3HPuJlPhxyE2vH9u6EVTybBx4wlvDP43FyhetriQjwv+SuPP2oNWD96L/qBY
 BHcSMHfkyq90Lp6tjCeTISkwOb66qqkRUlzycPiB67BgrIea8yn14lKpE7GLcgmO
 XSLLRvv6tFD2VcqEWQZNLoLo8XqAngvgStbOXxiTFpSQD4h2Z0TbpSc9qdVZlgIt
 JBMA0BuDj+gzCDePUlsuM5L1EVOaFuKSHiZA6MUewDBqiiKoWPPsDKsFpKt2jFv4
 Mp47JcWkDBg1DCC8nQ7f
 =FAuJ
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v3.12-rc0' of git://github.com/awilliam/linux-vfio

Pull VFIO update from Alex Williamson:
 "VFIO updates include safer default file flags for VFIO device fds, an
  external user interface exported to allow other modules to hold
  references to VFIO groups, a fix to test for extended config space on
  PCIe and PCI-x, and new hot reset interfaces for PCI devices which
  allows the user to do PCI bus/slot resets when all of the devices
  affected by the reset are owned by the user.

  For this last feature, the PCI bus reset interface, I depend on
  changes already merged from Bjorn's PCI pull request.  I therefore
  merged my tree up to commit cb3e433, which I think was the correct
  action, but as Stephen Rothwell noted, I failed to provide a commit
  message indicating why the merge was required.  Sorry for that.
  Thanks, Alex"

* tag 'vfio-v3.12-rc0' of git://github.com/awilliam/linux-vfio:
  vfio: fix documentation
  vfio-pci: PCI hot reset interface
  vfio-pci: Test for extended config space
  vfio-pci: Use fdget() rather than eventfd_fget()
  vfio: Add O_CLOEXEC flag to vfio device fd
  vfio: use get_unused_fd_flags(0) instead of get_unused_fd()
  vfio: add external user support
 2013-09-09 10:19:36 -07:00
Linus Torvalds bf97293eb8 NFS client updates for Linux 3.12 
Highlights include:
 
 - Fix NFSv4 recovery so that it doesn't recover lost locks in cases such as
   lease loss due to a network partition, where doing so may result in data
   corruption. Add a kernel parameter to control choice of legacy behaviour
   or not.
 - Performance improvements when 2 processes are writing to the same file.
 - Flush data to disk when an RPCSEC_GSS session timeout is imminent.
 - Implement NFSv4.1 SP4_MACH_CRED state protection to prevent other
   NFS clients from being able to manipulate our lease and file lockingr
   state.
 - Allow sharing of RPCSEC_GSS caches between different rpc clients
 - Fix the broken NFSv4 security auto-negotiation between client and server
 - Fix rmdir() to wait for outstanding sillyrename unlinks to complete
 - Add a tracepoint framework for debugging NFSv4 state recovery issues.
 - Add tracing to the generic NFS layer.
 - Add tracing for the SUNRPC socket connection state.
 - Clean up the rpc_pipefs mount/umount event management.
 - Merge more patches from Chuck in preparation for NFSv4 migration support.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSLelVAAoJEGcL54qWCgDyo2IQAKOfRJyZVnf4ipxi3xLNl1QF
 w/70DVSIF1S1djWN7G3vgkxj/R8KCvJ8CcvkAD2BEgRDeZJ9TtyKAdM/jYLZ+W05
 7k2QKk8fkwZmc1Y2qDqFwKHzP5ZgP5L2nGx7FNhi/99wEAe47yFG3qd3rUWKrcOf
 mnd863zgGDE2Q10slhoq/bywwMJo6tKZNeaIE8kPjgFbBEh/jslpAWr8dSA4QgvJ
 nZ8VB5XU8L+XJ0GpHHdjYm9LvQ51DbQ6omOF+0P4fI093azKmf4ZsrjMDWT8+iu3
 XkXlnQmKLGTi7yB43hHtn2NiRqwGzCcZ1Amo9PpCFaHUt1RP9cc37UhG1T+x1xWJ
 STEKDbvCdQ3FU9FvbgrGEwBR0e8fNS4fZY3ToDBflIcfwre0aWs5RCodZMUD0nUI
 4wY5J9NsQR/bL+v8KeUR4V4cXK8YrgL0zB4u4WYzH5Npxr5KD0NEKDNqRPhrB9l2
 LLF9Haql8j76Ff0ek6UGFIZjDE0h6Fs71wLBpLj+ZWArOJ7vBuLMBSOVqNpld9+9
 f2fEG7qoGF4FGTY4myH/eakMPaWnk9Ol4Ls/svSIapJ9+rePD+a93e/qnmdofIMf
 4TuEYk6ERib1qXgaeDRQuCsm2YE1Co5skGMaOsRFWgReE1c12QoJQVst2nMtEKp3
 uV2w8LgX18aZOZXJVkCM
 =ZuW+
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

   - Fix NFSv4 recovery so that it doesn't recover lost locks in cases
     such as lease loss due to a network partition, where doing so may
     result in data corruption.  Add a kernel parameter to control
     choice of legacy behaviour or not.
   - Performance improvements when 2 processes are writing to the same
     file.
   - Flush data to disk when an RPCSEC_GSS session timeout is imminent.
   - Implement NFSv4.1 SP4_MACH_CRED state protection to prevent other
     NFS clients from being able to manipulate our lease and file
     locking state.
   - Allow sharing of RPCSEC_GSS caches between different rpc clients.
   - Fix the broken NFSv4 security auto-negotiation between client and
     server.
   - Fix rmdir() to wait for outstanding sillyrename unlinks to complete
   - Add a tracepoint framework for debugging NFSv4 state recovery
     issues.
   - Add tracing to the generic NFS layer.
   - Add tracing for the SUNRPC socket connection state.
   - Clean up the rpc_pipefs mount/umount event management.
   - Merge more patches from Chuck in preparation for NFSv4 migration
     support"

* tag 'nfs-for-3.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (107 commits)
  NFSv4: use mach cred for SECINFO_NO_NAME w/ integrity
  NFS: nfs_compare_super shouldn't check the auth flavour unless 'sec=' was set
  NFSv4: Allow security autonegotiation for submounts
  NFSv4: Disallow security negotiation for lookups when 'sec=' is specified
  NFSv4: Fix security auto-negotiation
  NFS: Clean up nfs_parse_security_flavors()
  NFS: Clean up the auth flavour array mess
  NFSv4.1 Use MDS auth flavor for data server connection
  NFS: Don't check lock owner compatability unless file is locked (part 2)
  NFS: Don't check lock owner compatibility in writes unless file is locked
  nfs4: Map NFS4ERR_WRONG_CRED to EPERM
  nfs4.1: Add SP4_MACH_CRED write and commit support
  nfs4.1: Add SP4_MACH_CRED stateid support
  nfs4.1: Add SP4_MACH_CRED secinfo support
  nfs4.1: Add SP4_MACH_CRED cleanup support
  nfs4.1: Add state protection handler
  nfs4.1: Minimal SP4_MACH_CRED implementation
  SUNRPC: Replace pointer values with task->tk_pid and rpc_clnt->cl_clid
  SUNRPC: Add an identifier for struct rpc_clnt
  SUNRPC: Ensure rpc_task->tk_pid is available for tracepoints
  ...
 2013-09-09 09:19:15 -07:00
Linus Torvalds 6cccc7d301 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client 
Pull ceph updates from Sage Weil:
 "This includes both the first pile of Ceph patches (which I sent to
  torvalds@vger, sigh) and a few new patches that add support for
  fscache for Ceph.  That includes a few fscache core fixes that David
  Howells asked go through the Ceph tree.  (Thanks go to Milosz Tanski
  for putting this feature together)

  This first batch of patches (included here) had (has) several
  important RBD bug fixes, hole punch support, several different
  cleanups in the page cache interactions, improvements in the truncate
  code (new truncate mutex to avoid shenanigans with i_mutex), and a
  series of fixes in the synchronous striping read/write code.

  On top of that is a random collection of small fixes all across the
  tree (error code checks and error path cleanup, obsolete wq flags,
  etc)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (43 commits)
  ceph: use d_invalidate() to invalidate aliases
  ceph: remove ceph_lookup_inode()
  ceph: trivial buildbot warnings fix
  ceph: Do not do invalidate if the filesystem is mounted nofsc
  ceph: page still marked private_2
  ceph: ceph_readpage_to_fscache didn't check if marked
  ceph: clean PgPrivate2 on returning from readpages
  ceph: use fscache as a local presisent cache
  fscache: Netfs function for cleanup post readpages
  FS-Cache: Fix heading in documentation
  CacheFiles: Implement interface to check cache consistency
  FS-Cache: Add interface to check consistency of a cached object
  rbd: fix null dereference in dout
  rbd: fix buffer size for writes to images with snapshots
  libceph: use pg_num_mask instead of pgp_num_mask for pg.seed calc
  rbd: fix I/O error propagation for reads
  ceph: use vfs __set_page_dirty_nobuffers interface instead of doing it inside filesystem
  ceph: allow sync_read/write return partial successed size of read/write.
  ceph: fix bugs about handling short-read for sync read mode.
  ceph: remove useless variable revoked_rdcache
  ...
 2013-09-09 09:13:22 -07:00
Kuninori Morimoto 34e4447515 ASoC: rsnd: fixup flag name of rsnd_scu_platform_info 
it should be *USE*, not *USB*

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
 2013-09-09 16:06:20 +01:00
Al Viro 2d86465101 introduce kern_path_mountpoint() 
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-08 20:20:23 -04:00
Al Viro 197df04c74 rename user_path_umountat() to user_path_mountpoint_at() 
... and move the extern from linux/namei.h to fs/internal.h,
along with that of vfs_path_lookup().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-08 20:20:21 -04:00
Linus Torvalds 8aab6a2733 vfs: reorganize dput() memory accesses 
This is me being a bit OCD after all the dentry optimization work this
merge window: profiles end up showing 'dput()' as a rather expensive
operation, and there were two unrelated bad reasons for that.

The first reason was reading d_lockref.count for debugging purposes,
which touches the lockref cacheline (for reads) before really need to.
More importantly, the debugging test in question is _wrong_, and has
hidden bugs.  It's true that we can only sleep when the count goes down
to zero, but the test as-is hides the much more subtle bug that happens
if we race with somebody else deleting the file.

Anyway we _will_ touch that cacheline, but let's do it for a write and
in the right routine (ie in "lockref_put_or_lock()") which annotates the
costs better.  So remove the misleading debug code.

The other was an unnecessary access to the cacheline that contains the
d_lru list, just to check whether we already were on the LRU list or
not.  This is exactly what we have d_flags for, so that we can avoid
touching extra cache lines for the common case.  So just add another bit
for "is this dentry on the LRU".

Finally, mark the tests properly likely/unlikely, so that the common
fast-paths are dense in the instruction stream.

This makes the profiles look much saner.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-08 13:26:18 -07:00
Scott Lovenberg cdf1246ffb cifs: Move and expand MAX_SERVER_SIZE definition 
MAX_SERVER_SIZE has been moved to cifs_mount.h and renamed
CIFS_NI_MAXHOST for clarity.  It has been expanded to 1024 as the
previous value of 16 was very short.

Signed-off-by: Scott Lovenberg <scott.lovenberg@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
 2013-09-08 14:34:22 -05:00
Scott Lovenberg 54fcf270de cifs: Expand max share name length to 256 
The old max share name length limit was 80 due to Windows NET SHARE
command not allowing more than that.  However, share names can be much
longer.  This is a more reasonable maximum share name length.

Signed-off-by: Scott Lovenberg <scott.lovenberg@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
 2013-09-08 14:34:17 -05:00
Scott Lovenberg 8c3a2b4c42 cifs: Move string length definitions to uapi 
The max string length definitions for user name, domain name, password,
and share name have been moved into their own header file in uapi so the
mount helper can use autoconf to define them instead of keeping the
kernel side and userland side definitions in sync manually.  The names
have also been standardized with a "CIFS" prefix and "LEN" suffix.

Signed-off-by: Scott Lovenberg <scott.lovenberg@gmail.com>
Reviewed-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Steve French <smfrench@gmail.com>
 2013-09-08 14:34:11 -05:00
Linus Torvalds b409624ad5 Merge git://git.infradead.org/users/willy/linux-nvme 
Pull NVM Express driver update from Matthew Wilcox.

* git://git.infradead.org/users/willy/linux-nvme:
  NVMe: Merge issue on character device bring-up
  NVMe: Handle ioremap failure
  NVMe: Add pci suspend/resume driver callbacks
  NVMe: Use normal shutdown
  NVMe: Separate controller init from disk discovery
  NVMe: Separate queue alloc/free from create/delete
  NVMe: Group pci related actions in functions
  NVMe: Disk stats for read/write commands only
  NVMe: Bring up cdev on set feature failure
  NVMe: Fix checkpatch issues
  NVMe: Namespace IDs are unsigned
  NVMe: Update nvme_id_power_state with latest spec
  NVMe: Split header file into user-visible and kernel-visible pieces
  NVMe: Call nvme_process_cq from submission path
  NVMe: Remove "process_cq did something" message
  NVMe: Return correct value from interrupt handler
  NVMe: Disk IO statistics
  NVMe: Restructure MSI / MSI-X setup
  NVMe: Use kzalloc instead of kmalloc+memset
 2013-09-07 20:19:02 -07:00
Linus Torvalds 8de4651abe For the 3.12 merge window we have one new driver for the DA9063 PMIC 
from Dialog Semiconductor.
 
 Besides that driver we also have:
 
 - Device tree support for the s2mps11 driver
 
 - More devm_* conversion for the pm8921, max89xx, menelaus, tps65010,
   wl1273 and pcf50633-adc drivers.
 
 - A conversion to threaded IRQ and IRQ domain for the twl6030 driver.
 
 - A fairly big update for the rtsx driver: Better power saving support,
   better vendor settings handling, and a few fixes.
 
 - Support for a couple more boards (COMe-bHL6 and COMe-cTH6) for the
   Kontron driver.
 
 - A conversion to the dev_get_platdata() API for all MFD drivers.
 
 - A removal of non-DT (legacy) support for the twl6040 driver.
 
 - A few fixes and additions (Mic detect level) to the wm5110 register tables.
 
 - Regmap support for the davinci_voicecodec driver.
 
 - The usual bunch of minor cleanups and janitorial fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKFnjAAoJEIqAPN1PVmxKU9AP/RAmSYux6c+cd7P7roXL+/lA
 qNKy8Op31J51N/n918o7zwbskmRIJJsbd+I6ClBlYdCUB+B8/Oj41uD4F+q35b/H
 F5Xm2XRPQAGHx37m5adJMrK/OR3zCTwhPjleJYOJWIFjDP/nDNJIPwTYb13Rqurh
 V39icmRtnNR0uDOmv3eELyV4FnWQTpA858dxuhSi+5jbbHFhCcYShEmE9109eexl
 RNuyF8d0KPGvnKhK+H1/k4ZYG2XAFFOZfZz9MB+l651nidqDvwJph0Zdj3w1r112
 8OR5i7B3vw268nmyjOOUtYqL2vOaUW4lavmLTQiSdQWd1BHv9hEmD0RRR5bSrLeH
 6DwCTh0+xWH08ogbMwi4dwZyRhjxMPMpkxeNz51TpRnXKDSZmBgrjovKNJpP8pW6
 m7RsgUC9AiEQf/Ac0PBMrU8ABKeJnt3K3ZZp4YN7/H6rAMOhXjLqFD8JLoFvx08z
 itKKSzVaIA3pzxpnkWWiTsr+bChaSOrHHy1biWa4ve5pvrFc9ivPz1DhL3PTmXpp
 haeeylFG01r5NJIHeJewRsmUJk67aEyeAnnoLwqCRycWjdDmcCBC5bgDBkRRonoS
 93tgKVzL9q/NwvT5Uatw3uYqTN0jOuH0t39gAzu9uwnWvivcZK5EBYh789YQL+on
 zih4qUICM08yWRDNNDgF
 =a7dU
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD (multi-function device) updates from Samuel Ortiz:
 "For the 3.12 merge window we have one new driver for the DA9063 PMIC
  from Dialog Semiconductor.

  Besides that driver we also have:

   - Device tree support for the s2mps11 driver

   - More devm_* conversion for the pm8921, max89xx, menelaus, tps65010,
     wl1273 and pcf50633-adc drivers.

   - A conversion to threaded IRQ and IRQ domain for the twl6030 driver.

   - A fairly big update for the rtsx driver: Better power saving
     support, better vendor settings handling, and a few fixes.

   - Support for a couple more boards (COMe-bHL6 and COMe-cTH6) for the
     Kontron driver.

   - A conversion to the dev_get_platdata() API for all MFD drivers.

   - A removal of non-DT (legacy) support for the twl6040 driver.

   - A few fixes and additions (Mic detect level) to the wm5110 register
     tables.

   - Regmap support for the davinci_voicecodec driver.

   - The usual bunch of minor cleanups and janitorial fixes"

* tag 'mfd-3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (81 commits)
  mfd: ucb1x00-core: Rewrite ucb1x00_add_dev()
  mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for event name
  mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for sysfs
  mfd: timberdale: Use module_pci_driver
  mfd: timberdale: Remove redundant break
  mfd: timberdale: Staticize local variables
  mfd: ab8500-debugfs: Staticize local variables
  mfd: db8500-prcmu: Staticize clk_mgt
  mfd: db8500-prcmu: Use ANSI function declaration
  mfd: omap-usb-host: Staticize usbhs_driver_name
  mfd: 88pm805: Fix potential NULL pdata dereference
  mfd: 88pm800: Fix potential NULL pdata dereference
  mfd: twl6040: Use regmap for register cache
  mfd: davinci_voicecodec: Provide a regmap for register I/O
  mfd: davinci_voicecodec: Remove unused read and write functions
  mmc: memstick: rtsx: Modify copyright comments
  mmc: rtsx: Clear SD_CLK toggle enable bit if switching voltage fail
  mfd: mmc: rtsx: Change default tx phase
  mfd: pcf50633-adc: Use devm_*() functions
  mfd: rtsx: Copyright modifications
  ...
 2013-09-07 20:14:19 -07:00
Al Viro 4e10f3c988 Kill indirect include of file.h from eventfd.h, use fdget() in cgroup.c 
kernel/cgroup.c is the only place in the tree that relies on eventfd.h
pulling file.h; move that include there.  Switch from eventfd_fget()/fput()
to fdget()/fdput(), while we are at it - eventfd_ctx_fileget() will fail
on non-eventfd descriptors just fine, no need to do that check twice...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 2013-09-07 19:54:57 -04:00
Linus Torvalds e7d33bb5ea lockref: add ability to mark lockrefs "dead" 
The only actual current lockref user (dcache) uses zero reference counts
even for perfectly live dentries, because it's a cache: there may not be
any users, but that doesn't mean that we want to throw away the dentry.

At the same time, the dentry cache does have a notion of a truly "dead"
dentry that we must not even increment the reference count of, because
we have pruned it and it is not valid.

Currently that distinction is not visible in the lockref itself, and the
dentry cache validation uses "lockref_get_or_lock()" to either get a new
reference to a dentry that already had existing references (and thus
cannot be dead), or get the dentry lock so that we can then verify the
dentry and increment the reference count under the lock if that
verification was successful.

That's all somewhat complicated.

This adds the concept of being "dead" to the lockref itself, by simply
using a count that is negative.  This allows a usage scenario where we
can increment the refcount of a dentry without having to validate it,
and pushing the special "we killed it" case into the lockref code.

The dentry code itself doesn't actually use this yet, and it's probably
too late in the merge window to do that code (the dentry_kill() code
with its "should I decrement the count" logic really is pretty complex
code), but let's introduce the concept at the lockref level now.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-07 15:49:18 -07:00
Linus Torvalds dc0755cdb1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 
Pull vfs pile 2 (of many) from Al Viro:
 "Mostly Miklos' series this time"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  constify dcache.c inlined helpers where possible
  fuse: drop dentry on failed revalidate
  fuse: clean up return in fuse_dentry_revalidate()
  fuse: use d_materialise_unique()
  sysfs: use check_submounts_and_drop()
  nfs: use check_submounts_and_drop()
  gfs2: use check_submounts_and_drop()
  afs: use check_submounts_and_drop()
  vfs: check unlinked ancestors before mount
  vfs: check submounts and drop atomically
  vfs: add d_walk()
  vfs: restructure d_genocide()
 2013-09-07 14:36:57 -07:00
Linus Torvalds c7c4591db6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace 
Pull namespace changes from Eric Biederman:
 "This is an assorted mishmash of small cleanups, enhancements and bug
  fixes.

  The major theme is user namespace mount restrictions.  nsown_capable
  is killed as it encourages not thinking about details that need to be
  considered.  A very hard to hit pid namespace exiting bug was finally
  tracked and fixed.  A couple of cleanups to the basic namespace
  infrastructure.

  Finally there is an enhancement that makes per user namespace
  capabilities usable as capabilities, and an enhancement that allows
  the per userns root to nice other processes in the user namespace"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  userns:  Kill nsown_capable it makes the wrong thing easy
  capabilities: allow nice if we are privileged
  pidns: Don't have unshare(CLONE_NEWPID) imply CLONE_THREAD
  userns: Allow PR_CAPBSET_DROP in a user namespace.
  namespaces: Simplify copy_namespaces so it is clear what is going on.
  pidns: Fix hang in zap_pid_ns_processes by sending a potentially extra wakeup
  sysfs: Restrict mounting sysfs
  userns: Better restrictions on when proc and sysfs can be mounted
  vfs: Don't copy mount bind mounts of /proc/<pid>/ns/mnt between namespaces
  kernel/nsproxy.c: Improving a snippet of code.
  proc: Restrict mounting the proc filesystem
  vfs: Lock in place mounts from more privileged users
 2013-09-07 14:35:32 -07:00
Linus Torvalds 11c7b03d42 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security 
Pull security subsystem updates from James Morris:
 "Nothing major for this kernel, just maintenance updates"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (21 commits)
  apparmor: add the ability to report a sha1 hash of loaded policy
  apparmor: export set of capabilities supported by the apparmor module
  apparmor: add the profile introspection file to interface
  apparmor: add an optional profile attachment string for profiles
  apparmor: add interface files for profiles and namespaces
  apparmor: allow setting any profile into the unconfined state
  apparmor: make free_profile available outside of policy.c
  apparmor: rework namespace free path
  apparmor: update how unconfined is handled
  apparmor: change how profile replacement update is done
  apparmor: convert profile lists to RCU based locking
  apparmor: provide base for multiple profiles to be replaced at once
  apparmor: add a features/policy dir to interface
  apparmor: enable users to query whether apparmor is enabled
  apparmor: remove minimum size check for vmalloc()
  Smack: parse multiple rules per write to load2, up to PAGE_SIZE-1 bytes
  Smack: network label match fix
  security: smack: add a hash table to quicken smk_find_entry()
  security: smack: fix memleak in smk_write_rules_list()
  xattr: Constify ->name member of "struct xattr".
  ...
 2013-09-07 14:34:07 -07:00
Linus Torvalds 6be48f2940 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 
Pull crypto update from Herbert Xu:
 "Here is the crypto update for 3.12:

   - Added MODULE_SOFTDEP to allow pre-loading of modules.
   - Reinstated crct10dif driver using the module softdep feature.
   - Allow via rng driver to be auto-loaded.

   - Split large input data when necessary in nx.
   - Handle zero length messages correctly for GCM/XCBC in nx.
   - Handle SHA-2 chunks bigger than block size properly in nx.

   - Handle unaligned lengths in omap-aes.
   - Added SHA384/SHA512 to omap-sham.
   - Added OMAP5/AM43XX SHAM support.
   - Added OMAP4 TRNG support.

   - Misc fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (66 commits)
  Reinstate "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework"
  hwrng: via - Add MODULE_DEVICE_TABLE
  crypto: fcrypt - Fix bitoperation for compilation with clang
  crypto: nx - fix SHA-2 for chunks bigger than block size
  crypto: nx - fix GCM for zero length messages
  crypto: nx - fix XCBC for zero length messages
  crypto: nx - fix limits to sg lists for AES-CCM
  crypto: nx - fix limits to sg lists for AES-XCBC
  crypto: nx - fix limits to sg lists for AES-GCM
  crypto: nx - fix limits to sg lists for AES-CTR
  crypto: nx - fix limits to sg lists for AES-CBC
  crypto: nx - fix limits to sg lists for AES-ECB
  crypto: nx - add offset to nx_build_sg_lists()
  padata - Register hotcpu notifier after initialization
  padata - share code between CPU_ONLINE and CPU_DOWN_FAILED, same to CPU_DOWN_PREPARE and CPU_UP_CANCELED
  hwrng: omap - reorder OMAP TRNG driver code
  crypto: omap-sham - correct dma burst size
  crypto: omap-sham - Enable Polling mode if DMA fails
  crypto: tegra-aes - bitwise vs logical and
  crypto: sahara - checking the wrong variable
  ...
 2013-09-07 14:31:18 -07:00
Linus Torvalds 0ffb01d9de Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 
Pull networking fixes from David Miller:
 "A quick set of fixes, some to deal with fallout from yesterday's
  net-next merge.

   1) Fix compilation of bnx2x driver with CONFIG_BNX2X_SRIOV disabled,
      from Dmitry Kravkov.

   2) Fix a bnx2x regression caused by one of Dave Jones's mistaken
      braces changes, from Eilon Greenstein.

   3) Add some protective filtering in the netlink tap code, from Daniel
      Borkmann.

   4) Fix TCP congestion window growth regression after timeouts, from
      Yuchung Cheng.

   5) Correctly adjust TCP's rcv_ssthresh for out of order packets, from
      Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  tcp: properly increase rcv_ssthresh for ofo packets
  net: add documentation for BQL helpers
  mlx5: remove unused MLX5_DEBUG param in Kconfig
  bnx2x: Restore a call to config_init
  bnx2x: fix broken compilation with CONFIG_BNX2X_SRIOV is not set
  tcp: fix no cwnd growth after timeout
  net: netlink: filter particular protocols from analyzers
 2013-09-07 14:27:46 -07:00
David Herrmann c7dc65737c Input: evdev - add EVIOCREVOKE ioctl 
If we have multiple sessions on a system, we normally don't want
background sessions to read input events. Otherwise, it could capture
passwords and more entered by the user on the foreground session. This is
a real world problem as the recent XMir development showed:
  http://mjg59.dreamwidth.org/27327.html

We currently rely on sessions to release input devices when being
deactivated. This relies on trust across sessions. But that's not given on
usual systems. We therefore need a way to control which processes have
access to input devices.

With VTs the kernel simply routed them through the active /dev/ttyX. This
is not possible with evdev devices, though. Moreover, we want to avoid
routing input-devices through some dispatcher-daemon in userspace (which
would add some latency).

This patch introduces EVIOCREVOKE. If called on an evdev fd, this revokes
device-access irrecoverably for that *single* open-file. Hence, once you
call EVIOCREVOKE on any dup()ed fd, all fds for that open-file will be
rather useless now (but still valid compared to close()!). This allows us
to pass fds directly to session-processes from a trusted source. The
source keeps a dup()ed fd and revokes access once the session-process is
no longer active.
Compared to the EVIOCMUTE proposal, we can avoid the CAP_SYS_ADMIN
restriction now as there is no way to revive the fd again. Hence, a user
is free to call EVIOCREVOKE themself to kill the fd.

Additionally, this ioctl allows multi-layer access-control (again compared
to EVIOCMUTE which was limited to one layer via CAP_SYS_ADMIN). A middle
layer can simply request a new open-file from the layer above and pass it
to the layer below. Now each layer can call EVIOCREVOKE on the fds to
revoke access for all layers below, at the expense of one fd per layer.

There's already ongoing experimental user-space work which demonstrates
how it can be used:
  http://lists.freedesktop.org/archives/systemd-devel/2013-August/012897.html

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
 2013-09-07 12:53:20 -07:00
Linus Torvalds 27c7651a6a This is the bulk of GPIO changes for the v3.12 series: 
- A new driver for the TZ1090 PDC which is used on the metag
   architecture.
 
 - A new driver for the Kontron ETX or COMexpress GPIO block.
   This is found on some ETX x86 devices.
 
 - A new driver for the Fintek Super-I/O chips, used on
   some x86 boards.
 
 - Added device tree probing on a few select GPIO blocks.
 
 - Drop the Exynos support from the Samsung GPIO driver.
   The Samsung maintainers have moved over to use the
   modernized pin control driver to provide GPIO for the
   modern platforms instead.
 
 - The usual bunch of non-critical fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKZvzAAoJEEEQszewGV1zUg8QAMAqM90/U/0c73fxS28BbN6+
 5bO3a/l9JZYWHyk+739oFZqMUoPDKcq/IOSbirxdgpWE3zcF34ogNfIgSoAL77C5
 3yGa2Lclkxmngo8ZXXeu6DSTq82rlaVjCcHcXw/qd6lVAZT8YaS364vGYpcENPxI
 s1yfrCZy89kZQufX++ytcbIUj75KXHvd9MK9IRE4BVkQMgLXAX/oSbTdB5PhFb79
 J5ls0T1c8JRxI4sj32ZDh6dfeKGsRQF20z6OO5o0ZIyQ+ZGLJPlYatdivJelQz9J
 P67suwn86RXfABISYle2YbNmy3zX+wEyG2nHASDL7hSfWtGpZ5ANJTXqrKjwFITL
 sfqQhMtHDZ7fNbgA0kOyE25kgLybsJZNxR/PJGEHteT1+XZHi2nsP2NTNuxxEKjb
 6NyLXrYXb0VK/poG+ZYXH2tt0C02pg3MfN9y+nfh8reG2bfeLvL/cU7DiQgMUGEf
 DXwgXQdgow9dHus/ZuCuWz4xqAfqk5VRS8ba6Wg2F8uLaXY1qYM6mNeatzTfP3fg
 5jALMy038l7yMBMFnTp8GCb78/iIXWLtEejtgoowBuGbZtOjii8wEExHvl4tCabQ
 PbB9pG8+ojjiQPk2t1ZFFUqX6hCGBFrJbYnJj2vfftBHiFnz5bKrcSBOWVdTWgco
 YqURqegvZVin4aQNGFF2
 =oEK9
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v3.12 series:

   - A new driver for the TZ1090 PDC which is used on the metag
     architecture.

   - A new driver for the Kontron ETX or COMexpress GPIO block.  This is
     found on some ETX x86 devices.

   - A new driver for the Fintek Super-I/O chips, used on some x86
     boards.

   - Added device tree probing on a few select GPIO blocks.

   - Drop the Exynos support from the Samsung GPIO driver.

     The Samsung maintainers have moved over to use the modernized pin
     control driver to provide GPIO for the modern platforms instead.

   - The usual bunch of non-critical fixes and cleanups"

* tag 'gpio-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (36 commits)
  gpio: return -ENOTSUPP if debounce cannot be set
  gpio: improve error path in gpiolib
  gpio: add GPIO support for F71882FG and F71889F
  of: add vendor prefix for Microchip Technology Inc
  gpio: mcp23s08: rename the device tree property
  gpio: samsung: Drop support for Exynos SoCs
  gpio: pcf857x: Remove pdata argument to pcf857x_irq_domain_init()
  gpio: pcf857x: Sort headers alphabetically
  gpio: max7301: Reverting "Do not force SPI speed when using OF Platform"
  gpio: Fix bit masking in Kontron PLD GPIO driver
  gpio: pca953x: fix gpio input on gpio offsets >= 8
  drivers/gpio: simplify use of devm_ioremap_resource
  drivers/gpio/gpio-omap.c: convert comma to semicolon
  gpio-lynxpoint: Fix warning about unbalanced pm_runtime_enable
  gpio: Fix platform driver name in Kontron PLD GPIO driver
  gpio: adnp: Fix segfault if request_threaded_irq fails
  gpio: msm: Staticize local variable 'msm_gpio'
  gpio: gpiolib-of.c: make error message more meaningful by adding the node name and index
  gpio: use dev_get_platdata()
  gpio/mxc: add chained_irq_enter/exit() to mx2_gpio_irq_handler
  ...
 2013-09-07 10:53:00 -07:00
Linus Torvalds 8b8a7df9a1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 
Pull input updates from Dmitry Torokhov:
 "A new driver for slidebar on Ideapad laptops and a bunch of assorted
  driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (32 commits)
  Input: add SYN_MAX and SYN_CNT constants
  Input: max11801_ts - convert to devm
  Input: egalax-ts - fix typo and improve text
  Input: MAINTAINERS - change maintainer for cyttsp driver
  Input: cyttsp4 - kill 'defined but not used' compiler warnings
  Input: add driver for slidebar on Lenovo IdeaPad laptops
  Input: omap-keypad - set up irq type from DT
  Input: omap-keypad - enable wakeup capability for keypad.
  Input: omap-keypad - clear interrupts on open
  Input: omap-keypad - convert to threaded IRQ
  Input: omap-keypad - use bitfiled instead of hardcoded values
  Input: cyttsp4 - remove useless NULL test from cyttsp4_watchdog_timer()
  Input: wacom - fix error return code in wacom_probe()
  Input: as5011 - fix error return code in as5011_probe()
  Input: keyboard, serio - simplify use of devm_ioremap_resource
  Input: tegra-kbc - simplify use of devm_ioremap_resource
  Input: htcpen - fix incorrect placement of __initdata
  Input: qt1070 - add power management ops
  Input: wistron_btns - add MODULE_DEVICE_TABLE
  Input: wistron_btns - mark the Medion MD96500 keymap as tested
  ...
 2013-09-07 10:38:46 -07:00
Linus Torvalds b04c99e3b8 Revert "Input: introduce BTN/ABS bits for drums and guitars" 
This reverts commits 61e00655e9, 73f8645db1 and 8e22ecb603c8:
  "Input: introduce BTN/ABS bits for drums and guitars"
  "HID: wiimote: add support for Guitar-Hero drums"
  "HID: wiimote: add support for Guitar-Hero guitars"

The extra new ABS_xx values resulted in ABS_MAX no longer being a
power-of-two, which broke the comparison logic.  It also caused the
ioctl numbers to overflow into the next byte, causing problems for that.

We'll try again for 3.13.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-07 09:48:41 -07:00
Dmitry Torokhov 07176b988e Merge branch 'next' into for-linus 
Merge first round of changes for 3.12 merge window.
 2013-09-06 20:23:44 -07:00
Herbert Xu 68411521cc Reinstate "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework" 
This patch reinstates commits
	67822649d7
	39761214ee
	0b95a7f857
	31d939625a
	2d31e518a4

Now that module softdeps are in the kernel we can use that to resolve
the boot issue which cause the revert.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
 2013-09-07 12:56:26 +10:00