Switch everything to the new and more capable implementation of abs().
Mainly to give the new abs() a bit of a workout.
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For 64-bit arguments, the abs macro casts it to an int which leads to
lost precision and may cause incorrect results. To deal with 64-bit
types abs64 macro has been introduced but still there are places where
abs macro is used incorrectly.
To deal with the problem, expand abs macro such that it operates on s64
type when dealing with 64-bit types while still returning long when
dealing with smaller types.
This fixes one known bug (per John):
The internal clocksteering done for fine-grained error correction uses a
: logarithmic approximation, so any time adjtimex() adjusts the clock
: steering, timekeeping_freqadjust() quickly approximates the correct clock
: frequency over a series of ticks.
:
: Unfortunately, the logic in timekeeping_freqadjust(), introduced in commit
: dc491596f6 (Rework frequency adjustments to work better w/ nohz),
: used the abs() function with a s64 error value to calculate the size of
: the approximated adjustment to be made.
:
: Per include/linux/kernel.h: "abs() should not be used for 64-bit types
: (s64, u64, long long) - use abs64()".
:
: Thus on 32-bit platforms, this resulted in the clocksteering to take a
: quite dampended random walk trying to converge on the proper frequency,
: which caused the adjustments to be made much slower then intended (most
: easily observed when large adjustments are made).
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Reported-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix kernel-doc warnings in fs/fs-writeback.c by moving a #define macro to
after the function's opening brace. Also #undef this macro at the end of
the function.
../fs/fs-writeback.c:1984: warning: Excess function parameter 'inode' description in 'I_DIRTY_INODE'
../fs/fs-writeback.c:1984: warning: Excess function parameter 'flags' description in 'I_DIRTY_INODE'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix kernel-doc warning in fs/inode.c:
../fs/inode.c:1606: warning: No description found for parameter 'inode'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For a while now the Meta architecture port has been supported with only
odd fixes rather than any big new features, since it has now been
effectively supersceded by MIPS, and there is no prospect of any new
products being based on it. Change the maintenance status to Odd Fixes
in order to reflect reality.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Add explicit filtering for DAX mappings to FDPIC ELF coredump. This is
useful because DAX mappings have the potential to be very large.
This patch has only been compile tested.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add two new flags to the existing coredump mechanism for ELF files to
allow us to explicitly filter DAX mappings. This is desirable because
DAX mappings, like hugetlb mappings, have the potential to be very
large.
Update the coredump_filter documentation in
Documentation/filesystems/proc.txt so that it addresses the new DAX
coredump flags. Also update the documented default value of
coredump_filter to be consistent with the core(5) man page. The
documentation being updated talks about bit 4, Dump ELF headers, which
is enabled if CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is turned on in the
kernel config. This kernel config option defaults to "y" if both ELF
binaries and coredump are enabled.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit c39c4c6abb ("tcp: double default TSQ output bytes limit")
updated default value for tcp_limit_output_bytes
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
macvtap_do_read code calls macvtap_put_user while it might be set up
to wait for the user. This results in the following warning:
Jun 23 16:25:26 galen kernel: ------------[ cut here ]------------
Jun 23 16:25:26 galen kernel: WARNING: CPU: 0 PID: 30433 at kernel/sched/core.c:
7286 __might_sleep+0x7f/0x90()
Jun 23 16:25:26 galen kernel: do not call blocking ops when !TASK_RUNNING; state
=1 set at [<ffffffff810f1c1f>] prepare_to_wait+0x2f/0x90
Jun 23 16:25:26 galen kernel: CPU: 0 PID: 30433 Comm: cat Not tainted 4.1.0-rc6+
#11
Jun 23 16:25:26 galen kernel: Call Trace:
Jun 23 16:25:26 galen kernel: [<ffffffff817f76ba>] dump_stack+0x4c/0x65
Jun 23 16:25:26 galen kernel: [<ffffffff810a07ca>] warn_slowpath_common+0x8a/0xc
0
Jun 23 16:25:26 galen kernel: [<ffffffff810a0846>] warn_slowpath_fmt+0x46/0x50
Jun 23 16:25:26 galen kernel: [<ffffffff810f1c1f>] ? prepare_to_wait+0x2f/0x90
Jun 23 16:25:26 galen kernel: [<ffffffff810f1c1f>] ? prepare_to_wait+0x2f/0x90
Jun 23 16:25:26 galen kernel: [<ffffffff810cdc1f>] __might_sleep+0x7f/0x90
Jun 23 16:25:26 galen kernel: [<ffffffff811f8e15>] might_fault+0x55/0xb0
Jun 23 16:25:26 galen kernel: [<ffffffff810fab9d>] ? trace_hardirqs_on_caller+0x fd/0x1c0
Jun 23 16:25:26 galen kernel: [<ffffffff813f639c>] copy_to_iter+0x7c/0x360
Jun 23 16:25:26 galen kernel: [<ffffffffa052da86>] macvtap_do_read+0x256/0x3d0 [macvtap]
Jun 23 16:25:26 galen kernel: [<ffffffff810f20e0>] ? prepare_to_wait_event+0x110/0x110
Jun 23 16:25:26 galen kernel: [<ffffffffa052dcab>] macvtap_read_iter+0x2b/0x50 [macvtap]
Jun 23 16:25:26 galen kernel: [<ffffffff81247f2e>] __vfs_read+0xae/0xe0
Jun 23 16:25:26 galen kernel: [<ffffffff81248526>] vfs_read+0x86/0x140
Jun 23 16:25:26 galen kernel: [<ffffffff812493b9>] SyS_read+0x49/0xb0
Jun 23 16:25:26 galen kernel: [<ffffffff8180182e>] system_call_fastpath+0x12/0x76
Jun 23 16:25:26 galen kernel: ---[ end trace 22e33f67e70c0c2a ]---
Make sure thet we call finish_wait() if we have the skb to process
before trying to actually process it.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fixed_phy infrastructure is done in a way that is optional,
by providing 'static inline' helper functions doing nothing in
include/linux/phy_fixed.h for all its APIs. However, three out
of the four users (DSA, BCMGENET, and SYSTEMPORT) always
'select FIXED_PHY', presumably because they need that.
MVNETA is the fourth one, and if that is built-in but FIXED_PHY
is configured as a loadable module, we get a link error:
drivers/built-in.o: In function `mvneta_fixed_link_update':
fpga-mgr.c:(.text+0x33ed80): undefined reference to `fixed_phy_update_state'
Presumably this driver has the same dependency as the others,
so this patch also uses 'select' to ensure that the fixed-phy
support is built-in.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 898b2970e2 ("mvneta: implement SGMII-based in-band link state signaling")
Signed-off-by: David S. Miller <davem@davemloft.net>
I don't know if dev can actually be NULL here, but the test should be
above alloc_netdev(), to avoid leaking the struct net_device in case
dev is actually NULL. And of course the return value from alloc_netdev
should be tested.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a bug introduced by commit 7005c3e. That patch
tries to map a vm range for resource groups, but the calculation
breaks down when the block size is less than the page size.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
PCI_DEVICE_ID_AMD_15H_M60H_NB_F3 is now defined in pci_ids.h
Signed-off-by: Adam Majer <adamm@zombino.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
__HAVE_ARCH_MEMMOVE and __HAVE_ARCH_MEMSET are unconditionally defined
for nios2, so there is no need to protect the function definitions of
memmove() and memset().
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Ley Foon Tan <lftan@altera.com>
The generic __xchg() implementation present in asm-generic/cmpxchg.h is
correct on nios2 and even generates the same code. Switch to this generic
implementation to trim down the amount of ad-hoc copies of the code.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Ley Foon Tan <lftan@altera.com>
Fix the following compiler splat by adding __maybe_unused annotation to
the variable. Using this particular annotation has the least ugly impact
on the code compared to using ifdeffery.
arch/nios2/kernel/setup.c: In function 'nios2_boot_init':
arch/nios2/kernel/setup.c:107:7: warning: unused variable 'cmdline_passed' [-Wunused-variable]
char cmdline_passed[COMMAND_LINE_SIZE] = { 0, };
^
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Ley Foon Tan <lftan@altera.com>
This patch fixes the RGMII 10/100M mode by reprogramming the clock.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
net: add skb_to_full_sk() helper
Many contexts need to reach listener socket from skb attached
to a request socket. This patch series add skb_to_full_sk() to
clearly express this need and use it where appropriate.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
SYNACK packets might be attached to request sockets.
Fixes: ca6fb06518 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SYNACK packets might be attached to request sockets.
Fixes: ca6fb06518 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SYNACK packets might be attached to request sockets.
Fixes: ca6fb06518 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SYNACK packets might be attached to a request socket,
xt_owner wants to gte the listener in this case.
Fixes: ca6fb06518 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This module wants to access sk->sk_security, which is not
available for request sockets.
Fixes: ca6fb06518 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Generalize selinux_skb_sk() added in commit 212cd08953
("selinux: fix random read in selinux_ip_postroute_compat()")
so that we can use it other contexts.
Use it right away in selinux_netlbl_skbuff_setsid()
Fixes: ca6fb06518 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the 1st NFC fixes pull request for 4.4.
It includes bug fixes and one fix for a build failure, all of them
introduced with the first NFC pull request for 4.4.
We have:
- Fix nfcmrvl SPI driver potential build error due to a broken Kconfig
dependency.
- A few fixes for the firmware download implementation for the nfcmrvl
UART driver.
- A GPIO allocation leak for the nfcmrvl driver.
- One code simplification for the nfcmrvl DT handling.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NK80
-----END PGP SIGNATURE-----
Merge tag 'nfc-fixes-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixes
Samuel Ortiz says:
====================
NFC 4.4 fixes
This is the 1st NFC fixes pull request for 4.4.
It includes bug fixes and one fix for a build failure, all of them
introduced with the first NFC pull request for 4.4.
We have:
- Fix nfcmrvl SPI driver potential build error due to a broken Kconfig
dependency.
- A few fixes for the firmware download implementation for the nfcmrvl
UART driver.
- A GPIO allocation leak for the nfcmrvl driver.
- One code simplification for the nfcmrvl DT handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
aarch64 and s390x support eBPF JIT too, correct document to reflect this and
avoid any confusion.
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- fix remaining issues with noMMU cores;
- fix build for cores w/o cache or zero overhead loop options;
- fix boot of secondary cores in SMP configuration;
- add support for DMA to high memory pages;
- add dma_to_phys and phys_to_dma functions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UZaP
-----END PGP SIGNATURE-----
Merge tag 'xtensa-for-next-20151109' of git://github.com/jcmvbkbc/linux-xtensa
Xtensa improvements for 4.4:
- fix remaining issues with noMMU cores;
- fix build for cores w/o cache or zero overhead loop options;
- fix boot of secondary cores in SMP configuration;
- add support for DMA to high memory pages;
- add dma_to_phys and phys_to_dma functions.
This fixes the following build error seen in -next:
drivers/gpu/drm/nouveau/nvkm/subdev/instmem/gk20a.c:143:2: error:
implicit declaration of function 'dma_to_phys'
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- don't bugcheck if high memory page is passed to xtensa_map_page;
- turn empty dcache flush macros into functions so that they could be
passed as function parameters;
- use kmap_atomic to map high memory pages for cache invalidation/
flushing performed by xtensa_sync_single_for_{cpu,device}.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The recent change of the raid5-cache code to use crc32c instead
of crc32 causes link errors when CONFIG_LIBCRC32C is disabled:
drivers/built-in.o: In function crc32c'
core.c:(.text+0x1c6060): undefined reference to `crc32c'
This adds an explicit 'select' statement like all other users
of this function do.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 5cb2fbd6ea ("raid5-cache: use crc32c checksum")
Signed-off-by: NeilBrown <neilb@suse.com>
resource_size_t may be 32-bit wide on some architectures, which causes
this warning when building the NTB code:
drivers/ntb/ntb_transport.c: In function 'ntb_transport_link_work':
drivers/ntb/ntb_transport.c:828:46: warning: right shift count >= width of type [-Wshift-count-overflow]
The warning is harmless but can be avoided by using the upper_32_bits()
macro.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: e26a5843f7 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
There is no need for the upstream and downstream addresses to be different
for the NTB configs. Go to using a single set of address. It is still
possible to configure them differently using module parameter override
however.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked and Tested-by: Allen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Order of operations issue with the QP Num and MW count, which would
result in the receive buffer pointer being invalid if there are more
than 1 MW. Corrected with parenthesis to enforce the proper order of
operations.
Reported-by: John I. Kading <John.Kading@gd-ms.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
These variables were not used anywhere. So remove them.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
We were accessing nt->mw_vec after freeing it. Fix the error path so
that we free nt->mw_vec after we have finished using it.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
smatch detected an issue in the function ntb_transport_max_size() where
we could be dereferencing a dma channel pointer when it is NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
This patch fixes some bugs and partly cleans up the parisc uapi header
files to what glibc defined:
- compat_semid64_ds was wrong and did not take the endianess into
account
- ipc64_perm exported userspace types which broke building userspace
packages on debian (e.g. trinity)
- ipc64_perm needs to use a 32bit mode_t on 64bit kernel
- msqid64_ds and semid64_ds needs unsigned longs for various struct members
- shmid64_ds exported size_t instead of __kernel_size_t
And finally add some compile-time checks for the sizes of those structs
to avoid future breakage.
Runtime-tested with the Linux Test Project (LTP) testsuite.
Cc: <stable@vger.kernel.org> # 3.18+
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The struct hpux_stat64 is not needed any longer since we dropped HP-UX
support in commit 04c1614 ("parisc: hpux - Drop support for HP-UX
binaries").
Signed-off-by: Helge Deller <deller@gmx.de>
This driver supports the following functions:
- reading and settings time
- alarms when connected to an IRQ
- reading and clearing the voltage low flags
- nvram
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This patch sets year, month, day value for set_alarm function.
The current driver omits to set the values.
This fixes setting wake alarm for dates different than current day.
Without the patch the alarm scheduled for tomorrow would fire today on
chosen time.
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.kim@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
[k.kozlowski: Rebase and test the patch, update commit message]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
mcp794xx alarm registers must be written in BCD format. However, the
alarm programming logic neglected this by adding one to the value
after bin2bcd conversion has been already done, writing bad values
to month register in case the alarm being set is in October. In this
case, the alarm month value becomes 0x0a instead of the expected 0x10.
Fix by moving the +1 addition within the bin2bcd call also.
Fixes: 1d1945d261 ("drivers/rtc/rtc-ds1307.c: add alarm support for mcp7941x chips")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Though the isl12057 rtc driver should and will continue to support the
legacy "isil,irq2-can-wakeup-machine" property to enable RTC as the
wakeup source, we need to add support for the new standard property
"wakeup-source".
This patch adds support for "wakeup-source" property in addition to the
existing "isil,irq2-can-wakeup-machine" property.
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: rtc-linux@googlegroups.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Though the opal rtc driver should and will continue to support the legacy
"has-tpo" property to enable RTC as the wakeup source, we need to add
support for the new standard property "wakeup-source"
This patch adds support for "wakeup-source" property in addition to the
existing "has-tpo" property.
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: rtc-linux@googlegroups.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Since commit 1c6c69525b ("genirq: Reject
bogus threaded irq requests") threaded IRQs without a primary handler
need to be requested with IRQF_ONESHOT, otherwise the request will fail.
So pass the IRQF_ONESHOT flag in this case.
The semantic patch that makes this change is available
in scripts/coccinelle/misc/irqf_oneshot.cocci
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Add the clkout output clk to the common clock framework.
Disable the CLKOUT of the RTC after power-up.
After power-up/reset of the RTC, CLKOUT is enabled by default,
with CLKOUT enabled the RTC chip has 2-3 times higher power
consumption.
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Andrew Morton