mirror of https://gitee.com/openkylin/linux.git
62 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Sean Paul
|
6bb0942e8f |
drm/dp_mst: Remove single tx msg restriction.
Now that we can support multiple simultaneous replies, remove the
restrictions placed on sending new tx msgs.
This patch essentially just reverts commit
|
|
|
Sean Paul
|
fbc821c4a5 |
drm/mst: Support simultaneous down replies
Currently we have one down reply message servicing the mst manager, so we need to serialize all tx msgs to ensure we only have one message in flight at a time. For obvious reasons this is suboptimal (but less suboptimal than the free-for-all we had before serialization). This patch removes the single down_rep_recv message from manager and adds 2 replies in the branch structure. The 2 replies mirrors the tx_slots which we use to rate-limit outgoing messages and correspond to seqno in the packet headers. Cc: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Wayne Lin <waynelin@amd.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200213211523.156998-3-sean@poorly.run |
|
|
Lyude Paul
|
1cfff5f015 |
drm/dp_mst: Convert drm_dp_mst_topology_mgr.is_waiting_for_dwn_reply to bitfield
Small nitpick that I noticed a second ago - we can save some space in the struct by making this a bitfield and sticking it with the rest of the bitfields. Also, some small cleanup to the kdocs for this member. There should be no functional changes in this patch. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200122194846.16025-1-lyude@redhat.com |
|
|
Pankaj Bharadiya
|
a5c4dc1659 |
drm/dp_mst: Remove register_connector callback
Now drm_dp_mst_topology_cbs.register_connector callback is not getting used anymore hence remove it. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Suggested-by: Emil Velikov <emil.velikov@collabora.com> Suggested-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-4-pankaj.laxminarayan.bharadiya@intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> |
|
|
Maxime Ripard
|
28f2aff1ca |
Linux 5.6-rc2
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5JsVQeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHZEH+wddtJO4dZk5TZdF KZB2w2ldsCvrBZAmas1TVvm8ncvUf+ATUZcSIzvZ3YbLmxsuLF2Cz3kD+n+36Mvy ejwq8Scl7jwnouYps/Gfd6rRj/uCafqST4qp15GMGeiy2ST4A8dJrv5IAgZhD8/N SN1bSr1AXpZ2JlEzzLDQ/NdVoNMS6IzCOsaINZcc60/XQoQZFRBWamMJFqu+CmXD SBJOybQNFJhziy45cGZSAl+67sSCcoPftwTs0Stu4CJsvFWRb3MsbNTDS51Hjcc4 3tdgGOhoNXzyzZr96MEAHmiaW4VLQv0PGgUfOajE35viMz48OrwCTru8Kbuae3XM YHV4qJk= =yiem -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXkpecgAKCRDj7w1vZxhR xU4CAQD/8ZzfYroiiEI7FHEgvnuldGYZqA9kbNAO2Vueeac0OgD+Jojewdxy+pJ9 dxfA/POdtzx3hOdN+U1YgaDC0hbXwww= =XgKq -----END PGP SIGNATURE----- Merge v5.6-rc2 into drm-misc-next Lyude needs some patches in 5.6-rc2 and we didn't bring drm-misc-next forward yet, so it looks like a good occasion. Signed-off-by: Maxime Ripard <maxime@cerno.tech> |
|
|
Lyude Paul
|
a727fe8f05 |
drm/dp_mst: Mention max_payloads in proposed_vcpis/payloads docs
Mention that the size of these two structs is determined by max_payloads. Suggested by Ville Syrjälä. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200122194321.14953-2-lyude@redhat.com |
|
|
Dave Airlie
|
3d4743131b |
Linux 5.5-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl4k7i8eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvk0IAKRenVOdiudY77SQ VZjsteyrYTTQtPPv494ToIRjR0XQ+gYp8vyWzXTUC5Nm9Y9U3VzDqUPUjWszrSXE 6mU+tzcMc9qwuUxnIFn8zfg64ygw+37sn/w3xqeH4QmF9Z5Wl3EX3SdXTs7jp3RS VxiztkUNI5ZBV2GDtla5K/9qLPqCQnUYXIiyi5lAtBtiitZDVXFp7dy7hMgEiaEO +78K5Kh3xlt5ndDsBFOlwIb2Oof3KL7bBXntdbSBc/bjol6IRvAgln48HWCv59G2 jzAp2tj2KobX9GRAEPj+v4TQZEW0SXDNDi8MgQsM+3DYVCTmANsv57CBKRuf01+F nB1kAys= =zSnJ -----END PGP SIGNATURE----- Backmerge v5.5-rc7 into drm-next msm needs 5.5-rc4, go to the latest. Signed-off-by: Dave Airlie <airlied@redhat.com> |
|
|
Wayne Lin
|
5a64967a2f |
drm/dp_mst: Have DP_Tx send one msg at a time
[Why] Noticed this while testing MST with the 4 ports MST hub from StarTech.com. Sometimes can't light up monitors normally and get the error message as 'sideband msg build failed'. Look into aux transactions, found out that source sometimes will send out another down request before receiving the down reply of the previous down request. On the other hand, in drm_dp_get_one_sb_msg(), current code doesn't handle the interleaved replies case. Hence, source can't build up message completely and can't light up monitors. [How] For good compatibility, enforce source to send out one down request at a time. Add a flag, is_waiting_for_dwn_reply, to determine if the source can send out a down request immediately or not. - Check the flag before calling process_single_down_tx_qlock to send out a msg - Set the flag when successfully send out a down request - Clear the flag when successfully build up a down reply - Clear the flag when find erros during sending out a down request - Clear the flag when find errors during building up a down reply - Clear the flag when timeout occurs during waiting for a down reply - Use drm_dp_mst_kick_tx() to try to send another down request in queue at the end of drm_dp_mst_wait_tx_reply() (attempt to send out messages in queue when errors occur) Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200113093649.11755-1-Wayne.Lin@amd.com |
|
|
Mikita Lipski
|
8ec046716c |
drm/dp_mst: Add helper to trigger modeset on affected DSC MST CRTCs
[why]
Whenever a connector on an MST network is changed or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stream did not change timing.
[how]
Adding helper to trigger modesets on MST DSC connectors
by setting mode_changed flag on CRTCs in the same topology
as affected connector
v2: use drm_dp_mst_dsc_aux_for_port function to verify
if the port is DSC capable
v3: - added _must_check attribute
- removed topology manager check
- fix typos and indentations
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
|
Mikita Lipski
|
cd82d82cbc |
drm/dp_mst: Add branch bandwidth validation to MST atomic check
[why] Adding PBN attribute to drm_dp_vcpi_allocation structure to keep track of how much bandwidth each Port requires. Adding drm_dp_mst_atomic_check_bw_limit to verify that state's bandwidth needs doesn't exceed available bandwidth. The funtion is called in drm_dp_mst_atomic_check after drm_dp_mst_atomic_check_topology_state to fully verify that the proposed topology is supported. v2: Fixing some typos and indenting v3: Return correct error enums if no bw space available Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
|
|
Mikita Lipski
|
8afb7e6afa |
drm/dp_mst: Add DSC enablement helpers to DRM
Adding a helper function to be called by drivers outside of DRM to enable DSC on the MST ports. Function is called to recalculate VCPI allocation if DSC is enabled and raise the DSC flag to enable. In case of disabling DSC the flag is set to false and recalculation of VCPI slots is expected to be done in encoder's atomic_check. v2: squash separate functions into one and call it per port v3: Fix comment typos Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
|
|
Mikita Lipski
|
1c6c1cb5af |
drm/dp_mst: Manually overwrite PBN divider for calculating timeslots
[why] For DSC case we cannot use topology manager's PBN divider variable. The default divider does not take FEC into account. Therefore the driver has to calculate its own divider based on the link rate and lane count its handling, as it is hw specific. [how] Pass pbn_div as an argument, which is used if its more than zero, otherwise default topology manager's pbn_div will be used. Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
|
|
David Francis
|
c2bc1b6eab |
drm/dp_mst: Add helpers for MST DSC and virtual DPCD aux
Add drm_dp_mst_dsc_aux_for_port. To enable DSC, the DSC_ENABLED
register might have to be written on the leaf port's DPCD,
its parent's DPCD, or the MST manager's DPCD. This function
finds the correct aux for the job.
As part of this, add drm_dp_mst_is_virtual_dpcd. Virtual DPCD
is a DP feature new in DP v1.4, which exposes certain DPCD
registers on virtual ports.
v2: Remember to unlock mutex on all paths
v3: Refactor to match coding style and increase brevity
v4: - Check DSC capable MST sink connected directly to the device.
- Check branch's port_parent to be set
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
|
David Francis
|
a3c2b0ffc0 |
drm/dp_mst: Parse FEC capability on MST ports
As of DP1.4, ENUM_PATH_RESOURCES returns a bit indicating if FEC can be supported up to that point in the MST network. The bit is the first byte of the ENUM_PATH_RESOURCES ack reply, bottom-most bit (refer to section 2.11.9.4 of DP standard, v1.4) That value is needed for FEC and DSC support Store it on drm_dp_mst_port Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
|
|
David Francis
|
dc48529fb1 |
drm/dp_mst: Add PBN calculation for DSC modes
With DSC, bpp can be fractional in multiples of 1/16. Change drm_dp_calc_pbn_mode to reflect this, adding a new parameter bool dsc. When this parameter is true, treat the bpp parameter as having units not of bits per pixel, but 1/16 of a bit per pixel v2: Don't add separate function for this v3: In the equation divide bpp by 16 as it is expected not to leave any remainder v4: Added DSC test parameters for selftest Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
|
|
Daniel Vetter
|
6c56e8adc0 |
drm-misc-next for v5.6:
UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAl34lkkACgkQ/lWMcqZw E8M76g//WRYl9fWnV063s44FBVJYjGxaus0vQJSGidaPCIE6Ep6TNjXp8DVzV82M HR79P9glL02DC9B8pflioNNXdIRGSVk/FJcKVB2seFAqEFCAknvWDM/X/y+mOUpp fUeFl+Znlwx3YlM8f4Qujdbm+CbTewfbya4VAWeWd8XG2V8jfq5cmODPPlUMNenZ J6Ja+W3ph741uSIfAKaP69LVJgOcuUjXINE4SWhRk/i5QF3GIRej/A7ZjWGLQ/t2 2zUUF7EiCzhPomM40H3ddKtXb4ZjNJuc5pOD4GpxR8ciNbe2gUOHEZ5aenwYBdsU 5MwbxNKyMbKXATtn3yv3fSc4jH3DtmEKpmovONeO8ZDBrQBnxeYa3tQvfkNghA2f acoZMzYUImV+ft6DMIgpXppASvo7mQYDAbLPOGEJ9E44AL4UP00jesEjnK5FOHSR 3BEzGUnK/6QL5zFNPni8YZQ8dan4jDIno1mqIV+cQ4WCGlaKckzIWO6243Bf13b/ kROSJpgWkiK6Ngq0ofhD0MHyT/m1QnqUzWRKTJhRtPflSWRBsDZqWCQ5Vx1QlNIE /HfTNbTpXWwa+5wXbbB8TkDw5t9cQGnR+QcrEd9HgoIec7B5Re8rx9i0TJAT4N05 03RCQCecSfD8gwKd2wgaFIpFGRl9lTdLYSpffSmyL2X5a20lZhM= =b15X -----END PGP SIGNATURE----- Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com |
|
|
Sean Paul
|
f79489074c |
drm/dp_mst: Clear all payload id tables downstream when initializing
It seems that on certain MST hubs, namely the CableMatters USB-C 2x DP hub, using the DP_PAYLOAD_ALLOCATE_SET and DP_PAYLOAD_TABLE_UPDATE_STATUS register ranges to clear any pre-existing payload allocations on the hub isn't always enough to reset things if the source device has been reset unexpectedly. Or at least, that's the current running theory. The precise behavior appears to be that when the source device gets reset unexpectedly, the hub begins reporting an available_pbn value of 0 for all of its ports. This is a bit inconsistent with the our theory, since this seems to happen even if previously set PBN allocations should have resulted in a non-zero available_pbn value. So, it's possible that something else may be going on here. Strangely though, sending a CLEAR_PAYLOAD_ID_TABLE broadcast request when initializing the MST topology seems to bring things into working order and make available_pbn work again. Since this is a pretty safe solution, let's go ahead and implement it. Changes since v1: * Change indenting on drm_dp_send_clear_payload_id_table() prototype * Remove some braces in drm_dp_send_clear_payload_id_table() * Reorganize some variable declarations in drm_dp_send_clear_payload_id_table() * Don't forget to handle DP_CLEAR_PAYLOAD_ID_TABLE in drm_dp_sideband_parse_reply() * Move drm_dp_send_clear_payload_id_table() call into drm_dp_mst_link_probe_work(), since we can't send sideband messages while under lock in drm_dp_mst_topology_mgr_set_mst() * Change commit message Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190829000944.20722-1-lyude@redhat.com |
|
|
Lyude Paul
|
12a280c728 |
drm/dp_mst: Add topology ref history tracking for debugging
For very subtle mistakes with topology refs, it can be rather difficult to trace them down with the debugging info that we already have. I had one such issue recently while trying to implement suspend/resume reprobing for MST, and ended up coming up with this. Inspired by Chris Wilson's wakeref tracking for i915, this adds a very similar feature to the DP MST helpers, which allows for partial tracking of topology refs for both ports and branch devices. This is a lot less advanced then wakeref tracking: we merely keep a count of all of the spots where a topology ref has been grabbed or dropped, then dump out that history in chronological order when a port or branch device's topology refcount reaches 0. So far, I've found this incredibly useful for debugging topology refcount errors. Since this has the potential to be somewhat slow and loud, we add an expert kernel config option to enable or disable this feature, CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS. Changes since v1: * Don't forget to destroy topology_ref_history_lock Changes since v4: * Correct order of kref_put()/topology_ref_history_unlock - we can't unlock the history after kref_put() since the memory might have been freed by that point * Don't print message on allocation error failures, the kernel already does this for us Changes since v5: * Get rid of some leftover usages of %px * Remove a leftover empty return; statement Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-15-lyude@redhat.com |
|
|
Lyude Paul
|
6f85f73821 |
drm/dp_mst: Add basic topology reprobing when resuming
Finally! For a very long time, our MST helpers have had one very annoying issue: They don't know how to reprobe the topology state when coming out of suspend. This means that if a user has a machine connected to an MST topology and decides to suspend their machine, we lose all topology changes that happened during that period. That can be a big problem if the machine was connected to a different topology on the same port before resuming, as we won't bother reprobing any of the ports and likely cause the user's monitors not to come back up as expected. So, we start fixing this by teaching our MST helpers how to reprobe the link addresses of each connected topology when resuming. As it turns out, the behavior that we want here is identical to the behavior we want when initially probing a newly connected MST topology, with a couple of important differences: - We need to be more careful about handling the potential races between events from the MST hub that could change the topology state as we're performing the link address reprobe - We need to be more careful about handling unlikely state changes on ports - such as an input port turning into an output port, something that would be far more likely to happen in situations like the MST hub we're connected to being changed while we're suspend Both of which have been solved by previous commits. That leaves one requirement: - We need to prune any MST ports in our in-memory topology state that were present when suspending, but have not appeared in the post-resume link address response from their parent branch device Which we can now handle in this commit by modifying drm_dp_send_link_address(). We then introduce suspend/resume reprobing by introducing drm_dp_mst_topology_mgr_invalidate_mstb(), which we call in drm_dp_mst_topology_mgr_suspend() to traverse the in-memory topology state to indicate that each mstb needs it's link address resent and PBN resources reprobed. On resume, we start back up &mgr->work and have it reprobe the topology in the same way we would on a hotplug, removing any leftover ports that no longer appear in the topology state. Changes since v4: * Split indenting changes in drm_dp_mst_topology_mgr_resume() into a separate patch * Only fire hotplugs when something has actually changed after a link address probe * Don't try to change port->connector at all on ports, just throw out ports that need their connectors removed to make things easier. Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-14-lyude@redhat.com |
|
|
Lyude Paul
|
3f9b3f02dd |
drm/dp_mst: Protect drm_dp_mst_port members with locking
This is a complicated one. Essentially, there's currently a problem in the MST
core that hasn't really caused any issues that we're aware of (emphasis on "that
we're aware of"): locking.
When we go through and probe the link addresses and path resources in a
topology, we hold no locks when updating ports with said information. The
members I'm referring to in particular are:
- ldps
- ddps
- mcs
- pdt
- dpcd_rev
- num_sdp_streams
- num_sdp_stream_sinks
- available_pbn
- input
- connector
Now that we're handling UP requests asynchronously and will be using some of
the struct members mentioned above in atomic modesetting in the future for
features such as PBN validation, this is going to become a lot more important.
As well, the next few commits that prepare us for and introduce suspend/resume
reprobing will also need clear locking in order to prevent from additional
racing hilarities that we never could have hit in the past.
So, let's solve this issue by using &mgr->base.lock, the modesetting
lock which currently only protects &mgr->base.state. This works
perfectly because it allows us to avoid blocking connection_mutex
unnecessarily, and we can grab this in connector detection paths since
it's a ww mutex. We start by having drm_dp_mst_handle_up_req() hold this
when updating ports. For drm_dp_mst_handle_link_address_port() things
are a bit more complicated. As I've learned the hard way, we can grab
&mgr->lock.base for everything except for port->connector. See, our
normal driver probing paths end up generating this rather obvious
lockdep chain:
&drm->mode_config.mutex
-> crtc_ww_class_mutex/crtc_ww_class_acquire
-> &connector->mutex
However, sysfs grabs &drm->mode_config.mutex in order to protect itself
from connector state changing under it. Because this entails grabbing
kn->count, e.g. the lock that the kernel provides for protecting sysfs
contexts, we end up grabbing kn->count followed by
&drm->mode_config.mutex. This ends up creating an extremely rude chain:
&kn->count
-> &drm->mode_config.mutex
-> crtc_ww_class_mutex/crtc_ww_class_acquire
-> &connector->mutex
I mean, look at that thing! It's just evil!!! This gross thing ends up
making any calls to drm_connector_register()/drm_connector_unregister()
impossible when holding any kind of modesetting lock. This is annoying
because ideally, we always want to ensure that
drm_dp_mst_port->connector never changes when doing an atomic commit or
check that would affect the atomic topology state so that it can
reliably and easily be used from future DRM DP MST helpers to assist
with tasks such as scanning through the current VCPI allocations and
adding connectors which need to have their allocations updated in
response to a bandwidth change or the like.
Being able to hold &mgr->base.lock throughout the entire link probe
process would have been _great_, since we could prevent userspace from
ever seeing any states in-between individual port changes and as a
result likely end up with a much faster probe and more consistent
results from said probes. But without some rework of how we handle
connector probing in sysfs it's not at all currently possible. In the
future, maybe we can try using the sysfs locks to protect updates to
connector probing state and fix this mess.
So for now, to protect everything other than port->connector under
&mgr->base.lock and ensure that we still have the guarantee that atomic
check/commit contexts will never see port->connector change we use a
silly trick. See: port->connector only needs to change in order to
ensure that input ports (see the MST spec) never have a ghost connector
associated with them. But, there's nothing stopping us from simply
throwing the entire port out and creating a new one in order to maintain
that requirement while still keeping port->connector consistent across
the lifetime of the port in atomic check/commit contexts. For all
intended purposes this works fine, as we validate ports in any contexts
we care about before using them and as such will end up reporting the
connector as disconnected until it's port's destruction finalizes. So,
we just do that in cases where we detect port->input has transitioned
from true->false. We don't need to worry about the other direction,
since a port without a connector isn't visible to userspace and as such
doesn't need to be protected by &mgr->base.lock until we finish
registering a connector for it.
For updating members of drm_dp_mst_port other than port->connector, we
simply grab &mgr->base.lock in drm_dp_mst_link_probe_work() for already
registered ports, update said members and drop the lock before
potentially registering a connector and probing the link address of it's
children.
Finally, we modify drm_dp_mst_detect_port() to take a modesetting lock
acquisition context in order to acquire &mgr->base.lock under
&connection_mutex and convert all it's users over to using the
.detect_ctx probe hooks.
With that, we finally have well defined locking.
Changes since v4:
* Get rid of port->mutex, stop using connection_mutex and just use our own
modesetting lock - mgr->base.lock. Also, add a probe_lock that comes
before this patch.
* Just throw out ports that get changed from an output to an input, and
replace them with new ports. This lets us ensure that modesetting
contexts never see port->connector go from having a connector to being
NULL.
* Write an extremely detailed explanation of what problems this is
trying to fix, since there's a _lot_ of context here and I honestly
forgot some of it myself a couple times.
* Don't grab mgr->lock when reading port->mstb in
drm_dp_mst_handle_link_address_port(). It's not needed.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-7-lyude@redhat.com
|
|
|
Lyude Paul
|
14692a3637 |
drm/dp_mst: Add probe_lock
Currently, MST lacks locking in a lot of places that really should have some sort of locking. Hotplugging and link address code paths are some of the offenders here, as there is actually nothing preventing us from running a link address probe while at the same time handling a connection status update request - something that's likely always been possible but never seen in the wild because hotplugging has been broken for ages now (with the exception of amdgpu, for reasons I don't think are worth digging into very far). Note: I'm going to start using the term "in-memory topology layout" here to refer to drm_dp_mst_port->mstb and drm_dp_mst_branch->ports. Locking in these places is a little tougher then it looks though. Generally we protect anything having to do with the in-memory topology layout under &mgr->lock. But this becomes nearly impossible to do from the context of link address probes due to the fact that &mgr->lock is usually grabbed under random various modesetting locks, meaning that there's no way we can just invert the &mgr->lock order and keep it locked throughout the whole process of updating the topology. Luckily there are only two workers which can modify the in-memory topology layout: drm_dp_mst_up_req_work() and drm_dp_mst_link_probe_work(), meaning as long as we prevent these two workers from traveling the topology layout in parallel with the intent of updating it we don't need to worry about grabbing &mgr->lock in these workers for reads. We only need to grab &mgr->lock in these workers for writes, so that readers outside these two workers are still protected from the topology layout changing beneath them. So, add the new &mgr->probe_lock and use it in both drm_dp_mst_link_probe_work() and drm_dp_mst_up_req_work(). Additionally, add some more detailed explanations for how this locking is intended to work to drm_dp_mst_port->mstb and drm_dp_mst_branch->ports. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Sean Paul <sean@poorly.run> Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-6-lyude@redhat.com |
|
|
Lyude Paul
|
9408cc94eb |
drm/dp_mst: Handle UP requests asynchronously
Once upon a time, hotplugging devices on MST branches actually worked in DRM. Now, it only works in amdgpu (likely because of how it's hotplug handlers are implemented). On both i915 and nouveau, hotplug notifications from MST branches are noticed - but trying to respond to them causes messaging timeouts and causes the whole topology state to go out of sync with reality, usually resulting in the user needing to replug the entire topology in hopes that it actually fixes things. The reason for this is because the way we currently handle UP requests in MST is completely bogus. drm_dp_mst_handle_up_req() is called from drm_dp_mst_hpd_irq(), which is usually called from the driver's hotplug handler. Because we handle sending the hotplug event from this function, we actually cause the driver's hotplug handler (and in turn, all sideband transactions) to block on drm_device->mode_config.connection_mutex. This makes it impossible to send any sideband messages from the driver's connector probing functions, resulting in the aforementioned sideband message timeout. There's even more problems with this beyond breaking hotplugging on MST branch devices. It also makes it almost impossible to protect drm_dp_mst_port struct members under a lock because we then have to worry about dealing with all of the lock dependency issues that ensue. So, let's finally actually fix this issue by handling the processing of up requests asyncronously. This way we can send sideband messages from most contexts without having to deal with getting blocked if we hold connection_mutex. This also fixes MST branch device hotplugging on i915, finally! Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-5-lyude@redhat.com |
|
|
Lyude Paul
|
c485e2c97d |
drm/dp_mst: Refactor pdt setup/teardown, add more locking
Since we're going to be implementing suspend/resume reprobing very soon, we need to make sure we are extra careful to ensure that our locking actually protects the topology state where we expect it to. Turns out this isn't the case with drm_dp_port_setup_pdt() and drm_dp_port_teardown_pdt(), both of which change port->mstb without grabbing &mgr->lock. Additionally, since most callers of these functions are just using it to teardown the port's previous PDT and setup a new one we can simplify things a bit and combine drm_dp_port_setup_pdt() and drm_dp_port_teardown_pdt() into a single function: drm_dp_port_set_pdt(). This function also handles actually ensuring that we grab the correct locks when we need to modify port->mstb. Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-4-lyude@redhat.com |
|
|
Lyude Paul
|
7cb12d4831 |
drm/dp_mst: Destroy MSTBs asynchronously
When reprobing an MST topology during resume, we have to account for the fact that while we were suspended it's possible that mstbs may have been removed from any ports in the topology. Since iterating downwards in the topology requires that we hold &mgr->lock, destroying MSTBs from this context would result in attempting to lock &mgr->lock a second time and deadlocking. So, fix this by first moving destruction of MSTBs into destroy_connector_work, then rename destroy_connector_work and friends to reflect that they now destroy both ports and mstbs. Note that even though this means that MSTBs will still be accessible for a short period of time between their removal from the topology and delayed destruction, we are still protected against referencing a MSTB with a refcount of 0 since we use kref_get_unless_zero() in most places. Changes since v1: * s/destroy_connector_list/destroy_port_list/ s/connector_destroy_lock/delayed_destroy_lock/ s/connector_destroy_work/delayed_destroy_work/ s/drm_dp_finish_destroy_branch_device/drm_dp_delayed_destroy_mstb/ s/drm_dp_finish_destroy_port/drm_dp_delayed_destroy_port/ - danvet * Use two loops in drm_dp_delayed_destroy_work() - danvet * Better explain why we need to do this - danvet * Use cancel_work_sync() instead of flush_work() - flush_work() doesn't account for work requeing Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-2-lyude@redhat.com |
|
|
Lyude Paul
|
8578336985 |
drm/dp_mst: Remove lies in {up, down}_rep_recv documentation
These are most certainly accessed from far more than the mgr work. In fact, up_req_recv is -only- ever accessed from outside the mgr work. Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-19-lyude@redhat.com |
|
|
Lyude Paul
|
2f015ec6ea |
drm/dp_mst: Add sideband down request tracing + selftests
Unfortunately the DP MST helpers do not have much in the way of debugging utilities. So, let's add some! This adds basic debugging output for down sideband requests that we send from the driver, so that we can actually discern what's happening when sideband requests timeout. Since there wasn't really a good way of testing that any of this worked, I ended up writing simple selftests that lightly test sideband message encoding and decoding as well. Enjoy! Changes since v1: * Clean up DO_TEST() and sideband_msg_req_encode_decode() - danvet * Get rid of pr_fmt(), just define a prefix string instead and use drm_printf() * Check highest bit of VCPI in drm_dp_decode_sideband_req() - danvet * Make the switch case order between drm_dp_decode_sideband_req() and drm_dp_encode_sideband_req() the same - danvet * Only check DRM_UT_DP - danvet * Clean up sideband_msg_req_equal() from selftests a bit, and add comments explaining why we can't just use memcmp - danvet Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-8-lyude@redhat.com |
|
|
Sean Paul
|
268de6530a |
drm: mst: Fix query_payload ack reply struct
Spec says[1] Allocated_PBN is 16 bits
[1]- DisplayPort 1.2 Spec, Section 2.11.9.8, Table 2-98
Fixes:
|
|
|
Ville Syrjälä
|
562836a269 |
drm/dp_mst: Enable registration of AUX devices for MST ports
All available downstream ports - physical and logical - are exposed for
each MST device. They are listed in /dev/, following the same naming
scheme as SST devices by appending an incremental ID.
Although all downstream ports are exposed, only some will work as
expected. Consider the following topology:
+---------+
| ASIC |
+---------+
Conn-0|
|
+----v----+
+----| MST HUB |----+
| +---------+ |
| |
|Port-1 Port-2|
+-----v-----+ +-----v-----+
| MST | | SST |
| Display | | Display |
+-----------+ +-----------+
|Port-1
x
MST Path | MST Device
----------+----------------------------------
sst:0 | MST Hub
mst:0-1 | MST Display
mst:0-1-1 | MST Display's disconnected DP out
mst:0-1-8 | MST Display's internal sink
mst:0-2 | SST Display
On certain MST displays, the upstream physical port will ACK DPCD reads.
However, reads on the local logical port to the internal sink will
*NAK*. i.e. reading mst:0-1 ACKs, but mst:0-1-8 NAKs.
There may also be duplicates. Some displays will return the same GUID
when reading DPCD from both mst:0-1 and mst:0-1-8.
There are some device-dependent behavior as well. The MST hub used
during testing will actually *ACK* read requests on a disconnected
physical port, whereas the MST displays will NAK.
In light of these discrepancies, it's simpler to expose all downstream
ports - both physical and logical - and let the user decide what to use.
v3 changes:
* Change WARN_ON_ONCE -> DRM_ERROR on dpcd read errors
* Docstring and cosmetic fixes
v2 changes:
Moved remote aux device (un)registration to new mst connector late
register and early unregister helpers. Drivers should call these from
their own mst connector function hooks.
This is to solve an issue during driver unload, where mst connector
devices are unregistered before the remote aux devices are. In a setup
where aux devices are created as children of connector devices, the aux
device would be removed too early, and uncleanly. Doing so in
early_unregister solves this issue, as that is called before connector
unregistration.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-3-sunpeng.li@amd.com
|
|
|
Dave Airlie
|
c06de56121 |
Linux 5.0-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxqHJYeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWl8H/jPI4EipzD2GbnjZ GaFpMBBjcXBaVmoA+Y69so+7BHx1Ql+5GQtqbK0RHJRb9qEPLw3FBhHNjM/N8Sgf nSrK+GnBZp9s+k/NR/Yf2RacUR3jhz+Q9JEoQd3u9bFUeQyvE8Rf3vgtoBBwFOfz +t7N1memYVF3asLGWB4e4sP1YVMGfseTQpSPojvM30YWM86Bv+QtSx1AGgHczQIM kMKealR8ZPelN6JAXgLhQ5opDojBrE4YKB98pwsMDI6abz0Tz2JLFEUTTxsv5XNN o/Iz+XDoylskEyxN2unNWfHx7Swkvoklog8J/hDg5XlTvipL/WkT66PHBgcGMNvj BW9GgU8= =ZizU -----END PGP SIGNATURE----- Merge v5.0-rc7 into drm-next Backmerging for nouveau and imx that needed some fixes for next pulls. Signed-off-by: Dave Airlie <airlied@redhat.com> |
|
|
Lyude Paul
|
eceae14724 |
drm/dp_mst: Start tracking per-port VCPI allocations
There has been a TODO waiting for quite a long time in
drm_dp_mst_topology.c:
/* We cannot rely on port->vcpi.num_slots to update
* topology_state->avail_slots as the port may not exist if the parent
* branch device was unplugged. This should be fixed by tracking
* per-port slot allocation in drm_dp_mst_topology_state instead of
* depending on the caller to tell us how many slots to release.
*/
That's not the only reason we should fix this: forcing the driver to
track the VCPI allocations throughout a state's atomic check is
error prone, because it means that extra care has to be taken with the
order that drm_dp_atomic_find_vcpi_slots() and
drm_dp_atomic_release_vcpi_slots() are called in in order to ensure
idempotency. Currently the only driver actually using these helpers,
i915, doesn't even do this correctly: multiple ->best_encoder() checks
with i915's current implementation would not be idempotent and would
over-allocate VCPI slots, something I learned trying to implement
fallback retraining in MST.
So: simplify this whole mess, and teach drm_dp_atomic_find_vcpi_slots()
and drm_dp_atomic_release_vcpi_slots() to track the VCPI allocations for
each port. This allows us to ensure idempotency without having to rely
on the driver as much. Additionally: the driver doesn't need to do any
kind of VCPI slot tracking anymore if it doesn't need it for it's own
internal state.
Additionally; this adds a new drm_dp_mst_atomic_check() helper which
must be used by atomic drivers to perform validity checks for the new
VCPI allocations incurred by a state.
Also: update the documentation and make it more obvious that these
/must/ be called by /all/ atomic drivers supporting MST.
Changes since v9:
* Add some missing changes that were requested by danvet that I forgot
about after I redid all of the kref stuff:
* Remove unnecessary state changes in intel_dp_mst_atomic_check
* Cleanup atomic check logic for VCPI allocations - all we need to check in
compute_config is whether or not this state disables a CRTC, then free
VCPI based off that
Changes since v8:
* Fix compile errors, whoops!
Changes since v7:
- Don't check for mixed stale/valid VCPI allocations, just rely on
connector registration to stop such erroneous modesets
Changes since v6:
- Keep a kref to all of the ports we have allocations on. This required
a good bit of changing to when we call drm_dp_find_vcpi_slots(),
mainly that we need to ensure that we only redo VCPI allocations on
actual mode or CRTC changes, not crtc_state->active changes.
Additionally, we no longer take the registration of the DRM connector
for each port into account because so long as we have a kref to the
port in the new or previous atomic state, the connector will stay
registered.
- Use the small changes to drm_dp_put_port() to add even more error
checking to make misusage of the helpers more obvious. I added this
after having to chase down various use-after-free conditions that
started popping up from the new helpers so no one else has to
troubleshoot that.
- Move some accidental DRM_DEBUG_KMS() calls to DRM_DEBUG_ATOMIC()
- Update documentation again, note that find/release() should both not be
called on the same port in a single atomic check phase (but multiple
calls to one or the other is OK)
Changes since v4:
- Don't skip the atomic checks for VCPI allocations if no new VCPI
allocations happen in a state. This makes the next change I'm about
to list here a lot easier to implement.
- Don't ignore VCPI allocations on destroyed ports, instead ensure that
when ports are destroyed and still have VCPI allocations in the
topology state, the only state changes allowed are releasing said
ports' VCPI. This prevents a state with a mix of VCPI allocations
from destroyed ports, and allocations from valid ports.
Changes since v3:
- Don't release VCPI allocations in the topology state immediately in
drm_dp_atomic_release_vcpi_slots(), instead mark them as 0 and skip
over them in drm_dp_mst_duplicate_state(). This makes it so
drm_dp_atomic_release_vcpi_slots() is still idempotent while also
throwing warnings if the driver messes up it's book keeping and tries
to release VCPI slots on a port that doesn't have any pre-existing
VCPI allocation - danvet
- Change mst_state/state in some debugging messages to "mst state"
Changes since v2:
- Use kmemdup() for duplicating MST state - danvet
- Move port validation out of duplicate state callback - danvet
- Handle looping through MST topology states in
drm_dp_mst_atomic_check() so the driver doesn't have to do it
- Fix documentation in drm_dp_atomic_find_vcpi_slots()
- Move the atomic check for each individual topology state into it's
own function, reduces indenting
- Don't consider "stale" MST ports when calculating the bandwidth
requirements. This is needed because originally we relied on the
state duplication functions to prune any stale ports from the new
state, which would prevent us from incorrectly considering their
bandwidth requirements alongside legitimate new payloads.
- Add function references in drm_dp_atomic_release_vcpi_slots() - danvet
- Annotate atomic VCPI and atomic check functions with __must_check
- danvet
Changes since v1:
- Don't use the now-removed ->atomic_check() for private objects hook,
just give drivers a function to call themselves
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-19-lyude@redhat.com
|
|
|
Lyude Paul
|
bea5c38f1e |
drm/dp_mst: Add some atomic state iterator macros
Changes since v6: - Move EXPORT_SYMBOL() for drm_dp_mst_topology_state_funcs to this commit - Document __drm_dp_mst_state_iter_get() and note that it shouldn't be called directly Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@redhat.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Juston Li <juston.li@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-18-lyude@redhat.com |
|
|
Lyude Paul
|
ebcc0e6b50 |
drm/dp_mst: Introduce new refcounting scheme for mstbs and ports
The current way of handling refcounting in the DP MST helpers is really confusing and probably just plain wrong because it's been hacked up many times over the years without anyone actually going over the code and seeing if things could be simplified. To the best of my understanding, the current scheme works like this: drm_dp_mst_port and drm_dp_mst_branch both have a single refcount. When this refcount hits 0 for either of the two, they're removed from the topology state, but not immediately freed. Both ports and branch devices will reinitialize their kref once it's hit 0 before actually destroying themselves. The intended purpose behind this is so that we can avoid problems like not being able to free a remote payload that might still be active, due to us having removed all of the port/branch device structures in memory, as per: commit |
|
|
Lyude Paul
|
c235316d93 |
drm/dp_mst: Add __must_check to drm_dp_mst_topology_mgr_resume()
Since I've had to fix two cases of drivers not checking the return code from this function, let's make the compiler complain so this doesn't come up again in the future. Changes since v1: * Remove unneeded __must_check in function declaration - danvet Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-4-lyude@redhat.com |
|
|
Daniel Vetter
|
16bff572cc |
drm/dp-mst-helper: Remove hotplug callback
When everyone implements it exactly the same way, among all 4 implementations, there's not really a need to overwrite this at all. Aside: drm_kms_helper_hotplug_event is pretty much core functionality at this point. Probably should move it there. Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181128221234.15054-1-daniel.vetter@ffwll.ch |
|
|
Lyude Paul
|
f676481535 |
drm/dp_mst: Remove all evil duplicate state pointers
There's no reason to track the atomic state three times. Unfortunately, this is currently what we're doing, and even worse is that there is only one actually correct state pointer: the one in mst_state->base.state. mgr->state never seems to be used, along with the one in mst_state->state. This confused me for over 4 hours until I realized there was no magic behind these pointers. So, let's save everyone else from the trouble. Signed-off-by: Lyude Paul <lyude@redhat.com>. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181023231251.16883-3-lyude@redhat.com |
|
|
Dhinakaran Pandiyan
|
0bb9c2b27f |
drm/dp/mst: Sideband message transaction to power up/down nodes
The POWER_DOWN_PHY and POWER_UP_PHY sideband message transactions allow the source to reqest any node in a mst path or a whole path to be powered down or up. This allows drivers to target a specific sink in the MST topology, an improvement over just power managing the imediate downstream device. Secondly, since the request-reply protocol waits for an ACK, we can be sure that a downstream sink has enough time to respond to a power up/down request. v2: Fix memory leak (Lyude) Cc: Lyude <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170907001458.9399-1-dhinakaran.pandiyan@intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> |
|
|
Ville Syrjälä
|
a4370c7774 |
drm/atomic: Make private objs proper objects
Make the atomic private object stuff less special by introducing proper base classes for the object and its state. Drivers can embed these in their own appropriate objects, after which these things will work exactly like the plane/crtc/connector states during atomic operations. v2: Reorder to not depend on drm_dynarray (Daniel) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v1 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170712155102.26276-3-ville.syrjala@linux.intel.com |
|
|
Pandiyan, Dhinakaran
|
edb1ed1ab7 |
drm/dp: Add DP MST helpers to atomically find and release vcpi slots
drm_dp_atomic_find_vcpi_slots() should be called from ->atomic_check() to
check there are sufficient vcpi slots for a mode and to add that to the
state. This should be followed by a call to drm_dp_mst_allocate_vcpi()
in ->atomic_commit() to initialize a struct vcpi for the port.
drm_dp_atomic_release_vcpi_slots() should be called from
->atomic_check() to release a port's vcpi slot allocation from the
state.
Drivers that do not make use of this atomic helper are expected to call
drm_dp_find_vcpi_slots() instead before calling
drm_dp_mst_allocate_vcpi().
v3: drm_dp_atomic_release_vcpi_slots() now needs to know how many slots
to release as we may not have a valid reference to port.
v2:
Added checks for verifying the port reference is valid
Moved get_mst_topology_state() into the helpers (Daniel)
Changed find_vcpi_slots() to not depend on current allocation
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Harry Wentland <Harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1492753893-3748-4-git-send-email-dhinakaran.pandiyan@intel.com
|
|
|
Pandiyan, Dhinakaran
|
3f3353b7e1 |
drm/dp: Introduce MST topology state to track available link bandwidth
Link bandwidth is shared between multiple display streams in DP MST configurations. The DP MST topology manager structure maintains the shared link bandwidth for a primary link directly connected to the GPU. For atomic modesetting drivers, checking if there is sufficient link bandwidth for a mode needs to be done during the atomic_check phase to avoid failed modesets. Let's encapsulate the available link bw information in a private state structure so that bw can be allocated and released atomically for each of the ports sharing the primary link. v3: WARN_ON() if connection_mutex is not held (Archit) v2: Included kernel doc, moved state initialization and switched to kmemdup() for allocation (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Harry Wentland <Harry.wentland@amd.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1492753893-3748-3-git-send-email-dhinakaran.pandiyan@intel.com |
|
|
Pandiyan, Dhinakaran
|
1e797f556c |
drm/dp: Split drm_dp_mst_allocate_vcpi
drm_dp_mst_allocate_vcpi() apart from setting up the vcpi structure, also finds if there are enough slots available. This check is a duplicate of that implemented in drm_dp_mst_find_vcpi_slots(). Let's move this check out and reuse the existing drm_dp_mst_find_vcpi_slots() function to check if there are enough vcpi slots before allocating them. This brings the check to one place. Additionally drivers that will use MST state tracking for atomic modesets can use the atomic version of find_vcpi_slots() and reuse drm_dp_mst_allocate_vcpi() Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-4-git-send-email-dhinakaran.pandiyan@intel.com |
|
|
Pandiyan, Dhinakaran
|
feb2c3bc33 |
drm/dp: Kill unused MST vcpi slot availability tracking
The avail_slots member in the MST topology manager is never updated to reflect the available vcpi slots. The check is effectively against total slots, 63. So, let's make that check obvious and remove avail_slots. While at it, make debug messages more descriptive. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Archit Taneja <architt@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Harry Wentland <Harry.wentland@amd.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-3-git-send-email-dhinakaran.pandiyan@intel.com |
|
|
Pandiyan, Dhinakaran
|
a538d6137d |
drm/dp: Kill total_pbn and total_slots in struct drm_dp_mst_topology_mgr
The total vcpi time slots is always 63 and does not depend on the link BW, remove total_slots from MST topology manager struct. The next change is to remove total_pbn which is hardcoded to 2560. The total PBN that the topology manager allocates from depends on the link rate and is not a constant. So, fix this by removing the total_pbn member itself. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Archit Taneja <architt@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Harry Wentland <Harry.wentland@amd.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-2-git-send-email-dhinakaran.pandiyan@intel.com |
|
|
Daniel Vetter
|
6806cdf9aa |
drm/kms-helpers: Use recommened kerneldoc for struct member refs
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... v2: Comments from Gustavo. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Rewiewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-2-daniel.vetter@ffwll.ch |
|
|
Dhinakaran Pandiyan
|
7b0a89a6db |
drm/dp: Store drm_device in MST topology manager
struct drm_dp_mst_topology_mgr currently stores a pointer to struct dev. Changing this to instead hold a pointer to drm_device is more useful as it gives access to DRM structures. This also makes it consistent with other DRM structures like drm_crtc, drm_connector etc. Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1485301777-3465-2-git-send-email-dhinakaran.pandiyan@intel.com |
|
|
Daniel Vetter
|
132d49d728 |
drm/dp-mst: Missing kernel doc
Cc: Dave Airlie <airlied@redhat.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1468612088-9721-7-git-send-email-daniel.vetter@ffwll.ch |
|
|
Daniel Vetter
|
cb021a3eb6 |
drm/dp-mst: Remove tx_down_in_progress
Just replicates whether the list is empty or not. Nuke code to avoid writing docs for it! Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1468612088-9721-6-git-send-email-daniel.vetter@ffwll.ch |
|
|
Hersen Wu
|
5e93b8208d |
drm/dp/mst: move GUID storage from mgr, port to only mst branch
Previous implementation does not handle case below: boot up one MST branch to DP connector of ASIC. After boot up, hot plug 2nd MST branch to DP output of 1st MST, GUID is not created for 2nd MST branch. When downstream port of 2nd MST branch send upstream request, it fails because 2nd MST branch GUID is not available. New Implementation: only create GUID for MST branch and save it within Branch. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> |
|
|
Dave Airlie
|
28f03607bb |
Merge tag 'topic/drm-misc-2016-01-17' of git://anongit.freedesktop.org/drm-intel into drm-next
Since your main drm-next pull isn't out of the door yet I figured I might as well flush out drm-misc instead of delaying for 4.6. It's really just random stuff all over, biggest thing probably connector_mask tracking from Maarten. * tag 'topic/drm-misc-2016-01-17' of git://anongit.freedesktop.org/drm-intel: (24 commits) drm/fb_cma_helper: Remove implicit call to disable_unused_functions drm/sysfs: use kobj_to_dev() drm/i915: Init power domains early in driver load drm: Do not set connector->encoder in drivers apple-gmux: Add initial documentation drm: move MODULE_PARM_DESC to other file drm/edid: index CEA/HDMI mode tables using the VIC drm/atomic: Remove drm_atomic_connectors_for_crtc. drm/i915: Update connector_mask during readout, v2. drm: Remove opencoded drm_gem_object_release_handle() drm: Do not set outparam on error during GEM handle allocation drm/docs: more leftovers from the big vtable documentation pile drm/atomic-helper: Reject legacy flips on a disabled pipe drm/atomic: add connector mask to drm_crtc_state. drm/tegra: Use __drm_atomic_helper_reset_connector for subclassing connector state, v2. drm/atomic: Add __drm_atomic_helper_connector_reset, v2. drm/i915: Set connector_state->connector using the helper. drm: Use a normal idr allocation for the obj->name drm: Only bump object-reference count when adding first handle drm: Balance error path for GEM handle allocation ... |
|
|
Mykola Lysenko
|
1f16ee7fa1 |
drm/dp/mst: always send reply for UP request
We should always send reply for UP request in order to make downstream device clean-up resources appropriately. Issue was that reply for UP request was sent only once. Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org |
|
|
Julia Lawall
|
69a0f89c06 |
drm/dp/mst: constify drm_dp_mst_topology_cbs structures
The drm_dp_mst_topology_cbs structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> |