Save all information to start a task which can be exported to user
for debug usage. Dump file data format is specified in lima_dump.h
v2:
Add include header to address build robot complain.
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200307134423.24329-1-yuq825@gmail.com
As seen in the Vivante kernel driver, most GPUs with the BLT engine have
a broken TS cache flush. The workaround is to temporarily set the BLT
command to CLEAR_IMAGE, without actually executing the clear. Apparently
this state change is enough to trigger the required TS cache flush. As
the BLT engine is completely asychronous, we also need a few more stall
states to synchronize the flush with the frontend.
Root-caused-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Some Vivante GPUs are found in systems that have interconnects restricted
to 32 address bits, but may have system memory mapped above the 4GB mark.
As this region isn't accessible to the GPU via DMA any GPU memory allocated
in the upper part needs to go through SWIOTLB bounce buffering. This kills
performance if it happens too often, as well as overrunning the available
bounce buffer space, as the GPU buffer may stay mapped for a long time.
Avoid bounce buffering by checking the addressing restrictions. If the
GPU is unable to access memory above the 4GB mark, request our SHM buffers
to be located in the DMA32 zone.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Remove unused writeback code. This code will never be used, as omapfb is
being deprecated.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313122410.7528-1-tomi.valkeinen@ti.com
When 'VIAFB_DEBUG' and 'VIAFB_WARN' are not defined, modify the
DEBUG_MSG() &WARN_MSG() macros to use the no_printk() macro instead of
using <empty>.
This fixes a build warning when -Wextra is used and provides
printk format checking:
../drivers/video/fbdev/via/ioctl.c:88:47: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
Also use %lu to print an unsigned long instead of just %l, to fix
a printk format warning:
../drivers/video/fbdev/via/viafbdev.c: In function ‘viafb_dvp0_proc_write’:
../drivers/video/fbdev/via/viafbdev.c:1148:14: warning: unknown conversion type character ‘]’ in format [-Wformat=]
DEBUG_MSG("DVP0:reg_val[%l]=:%x\n", i,
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200315041002.24473-7-rdunlap@infradead.org
When 'DEBUG' is not defined, modify the DPRINTK() macro to use the
no_printk() macro instead of using <empty>.
This fixes build warnings when -Wextra is used and provides
printk format checking:
../drivers/video/fbdev/pm2fb.c:227:38: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../drivers/video/fbdev/pm3fb.c:1039:33: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
Also drop one argument in two DPRINTK() macro uses to provide the
correct number of arguments and use the correct field in one case
to fix a build error:
../drivers/video/fbdev/pm3fb.c:353:9: error: ‘struct fb_info’ has no member named ‘current_par’
info->current_par->depth);
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200315041002.24473-6-rdunlap@infradead.org
When 'SAVAGEFB_DEBUG' is not defined, modify the DBG() macro to use the
no_printk() macro instead of using <empty>.
This fixes a build warning when -Wextra is used and provides
printk format checking:
../drivers/video/fbdev/savage/savagefb_driver.c:2411:13: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200315041002.24473-5-rdunlap@infradead.org
When 'DEBUG' is not defined, modify the dprintk() macro to use the
no_printk() macro instead of using <empty>.
This fixes build warnings when -Wextra is used and provides
printk format checking:
../drivers/video/fbdev/matrox/matroxfb_base.c:635:77: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../drivers/video/fbdev/matrox/matroxfb_Ti3026.c:632:54: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
../drivers/video/fbdev/matrox/matroxfb_Ti3026.c:654:53: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200315041002.24473-4-rdunlap@infradead.org
When 'DEBUG' is not defined, modify the DPRINTK() macro to use the
no_printk() macro instead of using <empty>.
This fixes a build warning when -Wextra is used and provides
printk format checking:
../drivers/video/fbdev/aty/atyfb_base.c:784:61: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200315041002.24473-3-rdunlap@infradead.org
When 'DEBUG' is not defined, modify the DPRINTK() macro to use the
no_printk() macro instead of using <empty>.
This fixes a build warning when -Wextra is used and provides
printk format checking:
../drivers/video/fbdev/core/fbmon.c:812:47: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../drivers/video/fbdev/core/fbmon.c:842:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
../drivers/video/fbdev/core/fbmon.c:847:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200315041002.24473-2-rdunlap@infradead.org
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311093230.24900-4-tiwai@suse.de
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311093230.24900-3-tiwai@suse.de
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311093230.24900-2-tiwai@suse.de
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UrsU
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.7' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next
Mediatek DRM Next for Linux 5.7
This include MT8183 DPI support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1584580683.29614.5.camel@mtksdaap41
After commit f651c8b055 ("drm/virtio: factor out the sg_table from
virtio_gpu_object"), virtio_gpu_create_object allocates too small space
to fit everything in. It is because it allocates struct
virtio_gpu_object, but should allocate a newly added struct
virtio_gpu_object_shmem which has 2 more members.
So fix that by using correct type in virtio_gpu_create_object.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: http://patchwork.freedesktop.org/patch/msgid/20200319100421.16267-1-jslaby@suse.cz
Fixes: f651c8b055 ("drm/virtio: factor out the sg_table from virtio_gpu_object")
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are spelling mistakes in pr_err messages and a comment. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang warns:
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:754:6: warning: variable 'shadow'
is used uninitialized whenever 'if' condition is
false [-Wsometimes-uninitialized]
if (offset == grbm_cntl || offset == grbm_idx)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:757:6: note: uninitialized use
occurs here
if (shadow) {
^~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:754:2: note: remove the 'if' if
its condition is always true
if (offset == grbm_cntl || offset == grbm_idx)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:738:13: note: initialize the
variable 'shadow' to silence this warning
bool shadow;
^
= 0
1 warning generated.
shadow is only assigned in one condition and used as the condition for
another if statement; combine the two if statements and remove shadow
to make the code cleaner and resolve this warning.
Fixes: 2e0cc4d48b ("drm/amdgpu: revise RLCG access path")
Link: https://github.com/ClangBuiltLinux/linux/issues/936
Suggested-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix typo for vcn2.5/jpeg2.5 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix typo for vcn2/jpeg2 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix typo for vcn1 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The CAP fw is for enabling driver compatibility. Currently, it only
enabled for vega10 VF.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
issue smu cmd to disable all features upon baco entry for arcturus
to mitigate potential dirty I2C controller on boot
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Originally, only the PTE valid is taken in consider.
The PRT case is missied when bo update which raise problem.
We need add condition for PRT case.
v2: add PRT condition for amdgpu_vm_bo_update_mapping, too
v3: fix one typo error
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds logic that will determine if pipes need merging during validation.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The scratch space can be used to pass data between x86 and DMCUB. DMCUB
will manage the actually mapping of CW7 internally, driver does not
program the window.
[How]
Allocate extra space within the DMUB service's framebuffer for this
scratch space and expose them from the service for use in DC.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
before update dpp DTO, we check dppclks in context to determine it is
changed or not, but dppclks in context will be updated anyways after
flip is done, so compare dppclks in context will always get an equal
result.
[How]
Add pipe dpp clks in dccg and compare values between dccg and context.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Causes regression with MST DSC displays not lighting up after DPMS
[how]
Revert commit 8cc426d79b ("drm/amd/display: Program DSC during timing programming")
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
underflow happened when playing video on 1366x768 + 4K clone mode due to
incorrect handle watermark change flag and lower down clocks to early.
[How]
Check watermark change flag when decide doing optimized, and check
optimized required flag to do clock update.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
this register not exist in some asic, based on request remove this from
dc.
[how]
add guard for sanization.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We should check MST BU support capability on output port before building
vsc info packet.
[How]
Add a new definition for port and sink capability check.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In headless boot cases, self refresh control registers are not
programmed on boot. In certain hybrid graphics cases this may cause
cstate entering to get blocked causing a hang.
[HOW]
Program self refresh control register on boot.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DP doesn't have message id as the first byte of an hdcp message,
current hdcp psp unifies HDMI and DP message so that it is required
when reading DP HDCP messages in hdcp_ddc, a message id needs to be
added as the first byte of the HDCP message.
The id is currently assigned as a magic number which is not a good
coding practice.
[how]
Replace magic numbers with macro defined in hdcp headers.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to be able to enable/disable psr on dmcub and fallback to dmcu
when necessary.
[How]
Use dc config option to do so.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The default value for disable_dmcu is true, even for asics that require
dmcu.
[How]
Set flag properly per asic.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The PSR enablement was dependent on swizzle as a workaround for
non-pageflipping fb console. It's no longer required.
[How]
Remove PSR-enable dependency on swizzle mode.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This is enabled by default on Renoir but there's userspace/API support
to actually make use of this.
Since we're not passing this down through surface updates, let's
explicitly disable this for now.
This fixes "dcn20_program_front_end_for_ctx" warnings associated with
incorrect/unexpected programming sequences performed while this is
enabled.
[How]
Disable it at the topmost level in DM in case anyone tries to flip this
to enabled for any of the other ASICs like Navi10/14.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A "dcn20_program_front_end_for_ctx" warning is observed on Renoir.
Since the resource definition doesn't explicitly disable triplebuffer
flips like Navi10 DC actually attempts to go and setup triplebuffering
even when we pass in false to the plane state.
If we hit a full update after triplebuffering has been setup we see the
assertion since we don't expect full updates while performing
triplebuffer flips.
Normally this would get reset back to false whne we pass in the new
plane state, but since we never actually copy the flag when doing
surface updates this doesn't happen.
[How]
Copy the flag onto the plane update based on the requested surface
update state.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Right now only stream count is used to avoid split. This change updates
the W/A to check plane count instead.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When hotplug a HDMI monitor during entering S0i3 or DPMSOFF state due to
entering infinite loop when calling vbios to program pixel clocks. In
this scenario, pll is enabled but phy is not, and there is not a
programing guide for this case.
[How]
Before we having the proper programing guide, before disable pll, doing
a phy enable and disable to avoid the issue.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Due to previous code changes displays which are in active state
immediately transition to the active and added state. This makes the two
states redundant and unnecessary.
[How]
Instead of updating the device state to active and added after
successful addition, change state to inactive if addition failed. Also,
change references to active and added state to just added state.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When reprogram MSA with updated color space, the test color space shows
inconsistency. Linux has separate routine to set up test pattern color
space, but it fails to configure RGB.
[How]
Add RGB to test pattern.
Fixes: 43563bc2e6 ("drm/amd/display: update MSA and VSC SDP on video test pattern request")
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_connector->display_info is not passed to amdgpu_dm right way after
read edid.
[How]
display_info is parsed from edid and saved into drm_connector by
drm_connector_update_edid_proerty which is called within
amdgpu_dm_update_connector_after_detect. call this function after read
edid to update drm_connector->display_info
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Not programming dto with same values causes test failures in DCN2 diags
DPP tests.
[HOW]
This reverts commit 1b53e73323.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
. Replace the hand rolled encoder bitmask thing with drm_encoder_mask()
. Use mode->clock instead of reverse calculating it from the vrefresh
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJecZOQAAoJEFc4NIkMQxK47J4P/jEIlAScPph3+YVQHOyX+yBz
f8O7djTqbjAFLkH7T6/4YN8cDzEKBrYB0QnopE63syQjQ2VICPKDVeB8+06Ogbso
Vuo36BwMHTTHQE0zMogL+UVDYEOFsJWaU/PwQQ1PkIym6niEtt6xnypoHpvCalJ3
E2+WFX4z8+Ll2NeKE1iW57Q+XR1mOBYEKb+UIHrlb3Xf+A2lR3wS4TVc2mhJ0Yd5
HAUyDKMfMfmg/KremKXU/BzpZ42j+hNmEr9odrv7NPItDnJiCQ87LvhraJ37twWa
HkCWpVvBnWrTlNS4emQv2bHfJSLQUAIYStJIqNmnDvTx/peZZ7hJ9Xta30nuk4w0
prvOF4w7rktRNP9OjIigLXgg8qFVwtfXTyr7cI+SOYf5uklPQRGg3kOfCMBRMiHI
97Nde1GjQVVML10cvrLNwGUCO9BzOtLQalpMnFD6Hlr13hK73Tyo3iNSJ7aQYzX6
R/UCWqdVEeZYbxo8m6FE0JpfmfN5lZBQqVzYYFFTucCXrboRrfA9SJeoEb+nxpVL
ezyLhov+TcRIQRkjUT8Er/IKa5MqpKpS+LXsFBeBv1PCS8EnvnKR0EhqJuC3DiQO
U47o7KZPL3JuS79jHYh02T562CR66dq1uIvZti7BiG0AQOZhdDaBA8RYYGKR45Q4
YgI7mPpe4j+tJ15V3A7d
=wMbf
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Two cleanups
. Replace the hand rolled encoder bitmask thing with drm_encoder_mask()
. Use mode->clock instead of reverse calculating it from the vrefresh
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1584320957-9442-1-git-send-email-inki.dae@samsung.com
Qiang Yu