Currently it only support one page map/unmap once a time for dma-map
benchmark, but there are some other scenaries which need to support for
multi-page map/unmap: for those multi-pages interfaces such as
dma_alloc_coherent() and dma_map_sg(), the time spent on multi-pages
map/unmap is not the time of a single page * npages (not linear) as it
may use block description instead of page description when it is satified
with the size such as 2M/1G, and also it can send a single TLB invalidation
command to invalidate multi-pages instead of multi-times when RIL is
enabled (which will short the time of unmap). So it is necessary to add
support for multi-pages map/unmap.
Add a parameter "-g" to support multi-pages map/unmap.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Acked-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
s/Hisilicon/HiSilicon/g.
It should use capital S, according to
https://www.hisilicon.com/en/terms-of-use.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Acked-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In a real dma mapping user case, after dma_map is done, data will be
transmit. Thus, in multi-threaded user scenario, IOMMU contention
should not be that severe. For example, if users enable multiple
threads to send network packets through 1G/10G/100Gbps NIC, usually
the steps will be: map -> transmission -> unmap. Transmission delay
reduces the contention of IOMMU.
Here a delay is added to simulate the transmission between map and unmap
so that the tested result could be more accurate for TX and simple RX.
A typical TX transmission for NIC would be like: map -> TX -> unmap
since the socket buffers come from OS. Simple RX model eg. disk driver,
is also map -> RX -> unmap, but real RX model in a NIC could be more
complicated considering packets can come spontaneously and many drivers
are using pre-mapped buffers pool. This is in the TBD list.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The original code put five u32 before a u64 expansion[10] array. Five is
odd, this will cause trouble in the extension of the structure by adding
new features. This patch moves to use u8 for reserved field to avoid
future alignment risk.
Meanwhile, it also clears the memory of struct map_benchmark in tools,
otherwise, if users use old version to run on newer kernel, the random
expansion value will cause side effect on newer kernel.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch provides the test application for DMA_MAP_BENCHMARK.
Before running the test application, we need to bind a device to dma_map_
benchmark driver. For example, unbind "xxx" from its original driver and
bind to dma_map_benchmark:
echo dma_map_benchmark > /sys/bus/platform/devices/xxx/driver_override
echo xxx > /sys/bus/platform/drivers/xxx/unbind
echo xxx > /sys/bus/platform/drivers/dma_map_benchmark/bind
Another example for PCI devices:
echo dma_map_benchmark > /sys/bus/pci/devices/0000:00:01.0/driver_override
echo 0000:00:01.0 > /sys/bus/pci/drivers/xxx/unbind
echo 0000:00:01.0 > /sys/bus/pci/drivers/dma_map_benchmark/bind
The below command will run 16 threads on numa node 0 for 10 seconds on
the device bound to dma_map_benchmark platform_driver or pci_driver:
./dma_map_benchmark -t 16 -s 10 -n 0
dma mapping benchmark: threads:16 seconds:10
average map latency(us):1.1 standard deviation:1.9
average unmap latency(us):0.5 standard deviation:0.8
Cc: Will Deacon <will@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Xiang Chen