was a pretty active cycle for KVM. Changes include:
- a lot of s390 changes: optimizations, support for migration,
GDB support and more
- ARM changes are pretty small: support for the PSCI 0.2 hypercall
interface on both the guest and the host (the latter acked by Catalin)
- initial POWER8 and little-endian host support
- support for running u-boot on embedded POWER targets
- pretty large changes to MIPS too, completing the userspace interface
and improving the handling of virtualized timer hardware
- for x86, a larger set of changes is scheduled for 3.17. Still,
we have a few emulator bugfixes and support for running nested
fully-virtualized Xen guests (para-virtualized Xen guests have
always worked). And some optimizations too.
The only missing architecture here is ia64. It's not a coincidence
that support for KVM on ia64 is scheduled for removal in 3.17.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=j5Od
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm into next
Pull KVM updates from Paolo Bonzini:
"At over 200 commits, covering almost all supported architectures, this
was a pretty active cycle for KVM. Changes include:
- a lot of s390 changes: optimizations, support for migration, GDB
support and more
- ARM changes are pretty small: support for the PSCI 0.2 hypercall
interface on both the guest and the host (the latter acked by
Catalin)
- initial POWER8 and little-endian host support
- support for running u-boot on embedded POWER targets
- pretty large changes to MIPS too, completing the userspace
interface and improving the handling of virtualized timer hardware
- for x86, a larger set of changes is scheduled for 3.17. Still, we
have a few emulator bugfixes and support for running nested
fully-virtualized Xen guests (para-virtualized Xen guests have
always worked). And some optimizations too.
The only missing architecture here is ia64. It's not a coincidence
that support for KVM on ia64 is scheduled for removal in 3.17"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits)
KVM: add missing cleanup_srcu_struct
KVM: PPC: Book3S PR: Rework SLB switching code
KVM: PPC: Book3S PR: Use SLB entry 0
KVM: PPC: Book3S HV: Fix machine check delivery to guest
KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs
KVM: PPC: Book3S HV: Make sure we don't miss dirty pages
KVM: PPC: Book3S HV: Fix dirty map for hugepages
KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address
KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates()
KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number
KVM: PPC: Book3S: Add ONE_REG register names that were missed
KVM: PPC: Add CAP to indicate hcall fixes
KVM: PPC: MPIC: Reset IRQ source private members
KVM: PPC: Graciously fail broken LE hypercalls
PPC: ePAPR: Fix hypercall on LE guest
KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler
KVM: PPC: BOOK3S: Always use the saved DAR value
PPC: KVM: Make NX bit available with magic page
KVM: PPC: Disable NX for old magic page using guests
KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest
...
Pull first set of s390 updates from Martin Schwidefsky:
"The biggest change in this patchset is conversion from the bootmem
bitmaps to the memblock code. This conversion requires two common
code patches to introduce the 'physmem' memblock list.
We experimented with ticket spinlocks but in the end decided against
them as they perform poorly on virtualized systems. But the spinlock
cleanup and some small improvements are included.
The uaccess code got another optimization, the get_user/put_user calls
are now inline again for kernel compiles targeted at z10 or newer
machines. This makes the text segment shorter and the code gets a
little bit faster.
And as always some bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits)
s390/lowcore: replace lowcore irb array with a per-cpu variable
s390/lowcore: reserve 96 bytes for IRB in lowcore
s390/facilities: remove extract-cpu-time facility check
s390: require mvcos facility for z10 and newer machines
s390/boot: fix boot of compressed kernel built with gcc 4.9
s390/cio: remove weird assignment during argument evaluation
s390/time: cast tv_nsec to u64 prior to shift in update_vsyscall
s390/oprofile: make return of 0 explicit
s390/spinlock: refactor arch_spin_lock_wait[_flags]
s390/rwlock: add missing local_irq_restore calls
s390/spinlock,rwlock: always to a load-and-test first
s390/cio: fix multiple structure definitions
s390/spinlock: fix system hang with spin_retry <= 0
s390/appldata: add slab.h for kzalloc/kfree
s390/uaccess: provide inline variants of get_user/put_user
s390/pci: add some new arch specific pci attributes
s390/pci: use pdev->dev.groups for attribute creation
s390/pci: use macro for attribute creation
s390/pci: improve state check when processing hotplug events
s390: split TIF bits into CIF, PIF and TIF bits
...
Based on original patch from Jeng-fang (Nick) Wang
When standby memory is specified for a guest Linux, but no virtual memory has
been allocated on the Qemu host backing that guest, the guest memory detection
process encounters a memory access exception which is not thrown from the KVM
handle_tprot() instruction-handler function. The access exception comes from
sie64a returning EFAULT, which then passes an addressing exception to the guest.
Unfortunately this does not the proper PSW fixup (nullifying vs.
suppressing) so the guest will get a fault for the wrong address.
Let's just intercept the tprot instruction all the time to do the right thing
and not go the page fault handler path for standby memory. tprot is only used
by Linux during startup so some exits should be ok.
Without this patch, standby memory cannot be used with KVM.
Signed-off-by: Nick Wang <jfwang@us.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch fixes a minor bug when updating the guest debug settings.
We should check the given debug flags, not the already set ones.
Doesn't do any harm but too many (for now unused) flags could be set internally
without error.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
The oi and ni instructions used in entry[64].S to set and clear bits
in the thread-flags are not guaranteed to be atomic in regard to other
CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific
bits. Updates on the TIF bits are done with atomic instructions,
updates on CPU and pt_regs bits are done with non-atomic instructions.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch splits the SIE state guest prefix at offset 4
into a prefix bit field. Additionally it provides the
access functions:
- kvm_s390_get_prefix()
- kvm_s390_set_prefix()
to access the prefix per vcpu.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the sigp interpretation facility is installed, most SIGP EXTERNAL CALL
operations will be interpreted instead of intercepted. A partial execution
interception will occurr at the sending cpu only if the target cpu is in the
wait state ("W" bit in the cpuflags set). Instruction interception will only
happen in error cases (e.g. cpu addr invalid).
As a sending cpu might set the external call interrupt pending flags at the
target cpu at every point in time, we can't handle this kind of interrupt using
our kvm interrupt injection mechanism. The injection will be done automatically
by the SIE when preparing the start of the target cpu.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Thomas Huth <thuth@linux.vnet.ibm.com>
[Adopt external call injection to check for sigp interpretion]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Rework the function kvm_arch_fault_in_sync() to become a proper helper
function for faulting-in a guest page. Now it takes the guest address as
a parameter and does not ignore the possible error code from gmap_fault()
anymore (which could cause undetected error conditions before).
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
s390 has acquired irqfd support with commit "KVM: s390: irq routing for
adapter interrupts" (8422359877) but
failed to announce it. Let's fix that.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch enables the IBS facility when a single VCPU is running.
The facility is dynamically turned on/off as soon as other VCPUs
enter/leave the stopped state.
When this facility is operating, some instructions can be executed
faster for single-cpu guests.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch introduces two new functions to set/clear the CPUSTAT_STOPPED bit and
makes use of it at all applicable places. These functions prepare the additional
execution of code when starting/stopping a vcpu.
The CPUSTAT_STOPPED bit should not be touched outside of these functions.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
On hard exits (abort, sigkill) we have have some kvm_s390_interrupt_info
structures hanging around. Delete those on exit to avoid memory leaks.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: stable@vger.kernel.org
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
This patch adds support to debug the guest using the PER facility on s390.
Single-stepping, hardware breakpoints and hardware watchpoints are supported. In
order to use the PER facility of the guest without it noticing it, the control
registers of the guest have to be patched and access to them has to be
intercepted(stctl, stctg, lctl, lctlg).
All PER program interrupts have to be intercepted and only the relevant PER
interrupts for the guest have to be given back. Special care has to be taken
about repeated exits on the same hardware breakpoint. The intervention of the
host in the guests PER configuration is not fully transparent. PER instruction
nullification can not be used by the guest and too many storage alteration
events may be reported to the guest (if it is activated for special address
ranges only) when the host concurrently debugging it.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduce the methods to emulate the stctl and stctg instruction. Added tracing
code.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Convert kvm_s390_store_status_unloaded() to new guest access functions.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Check if siif is available before setting.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Make test_vfacility() available for other files. This is needed for the
new guest access functions, which test if certain facilities are available
for a guest.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
To enable CMMA and to reset its state we use the vm kvm_device ioctls,
encapsulating attributes within the KVM_S390_VM_MEM_CTRL group.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When userspace reset the guest without notifying kvm, the CMMA state
of the pages might be unused, resulting in guest data corruption.
To avoid this, CMMA must be enabled only if userspace understands
the implications.
CMMA must be enabled before vCPU creation. It can't be switched off
once enabled. All subsequently created vCPUs will be enabled for
CMMA according to the CMMA state of the VM.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[remove now unnecessary calls to page_table_reset_pgste]
We sometimes need to get/set attributes specific to a virtual machine
and so need something else than ONE_REG.
Let's copy the KVM_DEVICE approach, and define the respective ioctls
for the vm file descriptor.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Replace the kvm_s390_sync_dirty_log() stub with code to construct the KVM
dirty_bitmap from S390 memory change bits. Also add code to properly clear
the dirty_bitmap size when clearing the bitmap.
Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
CC: Dominik Dingel <dingel@linux.vnet.ibm.com>
[Dominik Dingel: use gmap_test_and_clear_dirty, locking fixes]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The first invocation of storage key operations on a given cpu will be intercepted.
On these intercepts we will enable storage keys for the guest and remove the
previously added intercepts.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Pull kvm updates from Paolo Bonzini:
"PPC and ARM do not have much going on this time. Most of the cool
stuff, instead, is in s390 and (after a few releases) x86.
ARM has some caching fixes and PPC has transactional memory support in
guests. MIPS has some fixes, with more probably coming in 3.16 as
QEMU will soon get support for MIPS KVM.
For x86 there are optimizations for debug registers, which trigger on
some Windows games, and other important fixes for Windows guests. We
now expose to the guest Broadwell instruction set extensions and also
Intel MPX. There's also a fix/workaround for OS X guests, nested
virtualization features (preemption timer), and a couple kvmclock
refinements.
For s390, the main news is asynchronous page faults, together with
improvements to IRQs (floating irqs and adapter irqs) that speed up
virtio devices"
* tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (96 commits)
KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8
KVM: PPC: Book3S HV: Fix decrementer timeouts with non-zero TB offset
KVM: PPC: Book3S HV: Don't use kvm_memslots() in real mode
KVM: PPC: Book3S HV: Return ENODEV error rather than EIO
KVM: PPC: Book3S: Trim top 4 bits of physical address in RTAS code
KVM: PPC: Book3S HV: Add get/set_one_reg for new TM state
KVM: PPC: Book3S HV: Add transactional memory support
KVM: Specify byte order for KVM_EXIT_MMIO
KVM: vmx: fix MPX detection
KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=n
KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCE
KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd write
KVM: s390: clear local interrupts at cpu initial reset
KVM: s390: Fix possible memory leak in SIGP functions
KVM: s390: fix calculation of idle_mask array size
KVM: s390: randomize sca address
KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP
KVM: Bump KVM_MAX_IRQ_ROUTES for s390
KVM: s390: irq routing for adapter interrupts.
KVM: s390: adapter interrupt sources
...
- memory leak on certain SIGP conditions
- wrong size for idle bitmap (always too big)
- clear local interrupts on initial CPU reset
1 performance improvement
- improve performance with many guests on certain workloads
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=7smd
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-20140325' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next
3 fixes
- memory leak on certain SIGP conditions
- wrong size for idle bitmap (always too big)
- clear local interrupts on initial CPU reset
1 performance improvement
- improve performance with many guests on certain workloads
Empty list of local interrupts when vcpu goes through initial reset
to provide a clean state
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We allocate a page for the 2k sca, so lets use the space to improve
hit rate of some internal cpu caches. No need to change the freeing
of the page, as this will shift away the page offset bits anyway.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Introduce a new interrupt class for s390 adapter interrupts and enable
irqfds for s390.
This is depending on a new s390 specific vm capability, KVM_CAP_S390_IRQCHIP,
that needs to be enabled by userspace.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add a new interface to register/deregister sources of adapter interrupts
identified by an unique id via the flic. Adapters may also be maskable
and carry a list of pinned pages.
These adapters will be used by irq routing later.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Allow KVM_ENABLE_CAP to act on a vm as well as on a vcpu. This makes more
sense when the caller wants to enable a vm-related capability.
s390 will be the first user; wire it up.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Since commit 7c470539c9
(s390/kvm: avoid automatic sie reentry) we will run through the C code
of KVM on host interrupts instead of just reentering the guest. This
will result in additional ucontrol exits (at least HZ per second). Let
handle a 0 intercept in the kernel and dont return to userspace,
even if in ucontrol mode.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: stable@vger.kernel.org
The BUG_ON in kvm-s390.c is unreachable, as we get the vcpu per common code,
which itself does this from the private_data field of the file descriptor,
and there is no KVM_UNCREATE_VCPU.
The __{set,unset}_cpu_idle BUG_ONs are not triggerable because the vcpu
creation code already checks against KVM_MAX_VCPUS.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We can use kvm_get_vcpu() now and don't need the
local_int array in the floating_int struct anymore.
This also means we don't have to hold the float_int.lock
in some places.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
For migration/reset we want to expose the guest breaking event
address register to userspace. Lets use ONE_REG for that purpose.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
commit d208c79d63 (KVM: s390: Enable
the LPP facility for guests) enabled the LPP instruction for guests.
We should expose the program parameter as a pseudo register for
migration/reset etc. Lets also reset this value on initial CPU
reset.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
A vcpu is defined to be runnable if an interrupt is pending.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch enables Collaborative Memory Management (CMM) for kvm
on s390. CMM allows the guest to inform the host about page usage
(see arch/s390/mm/cmm.c). The host uses this information to avoid
swapping in unused pages in the page fault handler. Further, a CPU
provided list of unused invalid pages is processed to reclaim swap
space of not yet accessed unused pages.
[ Martin Schwidefsky: patch reordering and cleanup ]
Signed-off-by: Konstantin Weitz <konstantin.weitz@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
To enable pfault after live migration we need to expose pfault_token,
pfault_select and pfault_compare, as one reg registers to userspace.
So that qemu is able to transfer this between the source and the target.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch enables async page faults for s390 kvm guests.
It provides the userspace API to enable and disable_wait this feature.
The disable_wait will enforce that the feature is off by waiting on it.
Also it includes the diagnose code, called by the guest to enable async page faults.
The async page faults will use an already existing guest interface for this
purpose, as described in "CP Programming Services (SC24-6084)".
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In the case of a fault, we will retry to exit sie64 but with gmap fault
indication for this thread set. This makes it possible to handle async
page faults.
Based on a patch from Martin Schwidefsky.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds a floating irq controller as a kvm_device.
It will be necessary for migration of floating interrupts as well
as for hardening the reset code by allowing user space to explicitly
remove all pending floating interrupts.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
- transactional execution
- lpp sampling support
In addition there is also a fix to the virtio-ccw guest driver. This will
enable future features
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=GbUg
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-20140117' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-queue
This deals with 2 guest features that need enablement in the kvm host:
- transactional execution
- lpp sampling support
In addition there is also a fix to the virtio-ccw guest driver. This will
enable future features
Seems that commit 210b160701
(KVM: s390: Removed SIE_INTERCEPT_UCONTROL) lost a hunk when we
reworked our patch queue to rework the async_fp code. We now
ignore faults on the sie instruction (guest accesses non-existing
memory) instead of sending a fault into the guest. This leads to
hang situations with the old virtio transport that checks for
descriptor memory after guest memory. Instead of bailing out this
code now goes wild...
Lets re-add the check.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The Load-Program-Parameter Facility is available for guests without
any further ado, so we should indicate its availability by setting
facility bit 40 if it is supported by the host.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch enables transactional execution for KVM guests
on s390 systems zec12 or later.
We rework the allocation of the page containing the sie_block
to also back the Interception Transaction Diagnostic Block.
If available the TE facilities will be enabled.
Setting bit 73 and 50 in vfacilities bitmask reveals the HW
facilities Transactional Memory and Constraint Transactional
Memory respectively to the KVM guest.
Furthermore, the patch restores the Program-Interruption TDB
from the Interception TDB in case a program interception has
occurred and the ITDB has a valid format.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Only the most 7 significant bytes of the clock comparator must be
saved to the status area, and the byte at offset 304 has to be zero.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The SIGP order STOP_AND_STORE_STATUS is defined to stop a CPU and store
its status. However, we only stored the status if the CPU was still
running, so make sure that the status is now also stored if the CPU was
already stopped. This fixes the problem that the CPU information was
not stored correctly in kdump files, rendering them unreadable.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The SIE_INTERCEPT_UCONTROL can be removed by moving the related code
from kvm_arch_vcpu_ioctl_run() to vcpu_post_run().
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
side: the HV and emulation flavors can now coexist in a single kernel
is probably the most interesting change from a user point of view.
On the x86 side there are nested virtualization improvements and a
few bugfixes. ARM got transparent huge page support, improved
overcommit, and support for big endian guests.
Finally, there is a new interface to connect KVM with VFIO. This
helps with devices that use NoSnoop PCI transactions, letting the
driver in the guest execute WBINVD instructions. This includes
some nVidia cards on Windows, that fail to start without these
patches and the corresponding userspace changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=rWNf
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM changes from Paolo Bonzini:
"Here are the 3.13 KVM changes. There was a lot of work on the PPC
side: the HV and emulation flavors can now coexist in a single kernel
is probably the most interesting change from a user point of view.
On the x86 side there are nested virtualization improvements and a few
bugfixes.
ARM got transparent huge page support, improved overcommit, and
support for big endian guests.
Finally, there is a new interface to connect KVM with VFIO. This
helps with devices that use NoSnoop PCI transactions, letting the
driver in the guest execute WBINVD instructions. This includes some
nVidia cards on Windows, that fail to start without these patches and
the corresponding userspace changes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits)
kvm, vmx: Fix lazy FPU on nested guest
arm/arm64: KVM: PSCI: propagate caller endianness to the incoming vcpu
arm/arm64: KVM: MMIO support for BE guest
kvm, cpuid: Fix sparse warning
kvm: Delete prototype for non-existent function kvm_check_iopl
kvm: Delete prototype for non-existent function complete_pio
hung_task: add method to reset detector
pvclock: detect watchdog reset at pvclock read
kvm: optimize out smp_mb after srcu_read_unlock
srcu: API for barrier after srcu read unlock
KVM: remove vm mmap method
KVM: IOMMU: hva align mapping page size
KVM: x86: trace cpuid emulation when called from emulator
KVM: emulator: cleanup decode_register_operand() a bit
KVM: emulator: check rex prefix inside decode_register()
KVM: x86: fix emulation of "movzbl %bpl, %eax"
kvm_host: typo fix
KVM: x86: emulate SAHF instruction
MAINTAINERS: add tree for kvm.git
Documentation/kvm: add a 00-INDEX file
...
Linus Torvalds