mirror of https://gitee.com/openkylin/linux.git
1932 Commits
Author | SHA1 | Message | Date |
---|---|---|---|
Linus Torvalds | 9896c7b57e |
ARM: SoC platform updates for v4.7
We get support for three new 32-bit SoC platforms this time. The amount of changes in arch/arm for any of them is miniscule, as all the interesting code is in device driver subsystems (irqchip, clk, pinctrl, ...) these days. I'm listing them here, as the addition of the Kconfig statement is the main relevant milestone for a new platform. In each case, some drivers are are shared with existing platforms, while other drivers are added for v4.7 as well, or come in a later release. - The Aspeed platform is probably the most interesting one, this is what most whitebox servers use as their baseboard management controller. We get support for the very common ast2400 and ast2500 SoCs. The OpenBMC project focuses on this chip, and the LWN article about their ELC 2016 presentation at https://lwn.net/Articles/683320/ triggered the submission, but the code comes from IBM's OpenPOWER team rather than the team at Facebook. There are still a lot more drivers that need to get added over time, and I hope both teams can work together on that. - OXNAS is an old platform for Network Attached Storage devices from Oxford Semiconductor. There are models with ARM10 (!) and ARM11MPCore cores, but for now, we only support the original ARM9 based versions. The product lineup was subsequently part of PLX, Avago and now the new Broadcom Ltd. https://wiki.openwrt.org/doc/hardware/soc/soc.oxnas has some more information. - V2M-MPS2 is a prototyping platform from ARM for their Cortex-M cores and is related to the existing Realview / Versatile Express lineup, but without MMU. We now support various NOMMU platforms, so adding a new one is fairly straightforward. http://infocenter.arm.com/help/topic/com.arm.doc.100112_0100_03_en/ has detailed information about the platform. Other noteworthy updates: - Work on LPC32xx has resumed, and Vladimir Zapolskiy and Sylvain Lemieux are now maintaining the platform. This is an older ARM9 based platform from NXP (not Freescale), but it remains in use in embedded markets. - Kevin Hilman is now co-maintaining the Amlogic Meson platform for both 32-bit and 64-bit ARM, and started contributing some patches. - As is often the case, work on the OMAP platforms makes up the bulk of the actual SoC code changes in arch/arm, but there isn't a lot of that either. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAVzuXX2CrR//JCVInAQLTghAA0f+2V2wC6HVBfDhT1YmhbAkPF1KzgLbB h30fN6BtIe9mE3kR69uWgwPSzn4hTKEQXoC9m6S+XClTn6MKPrbCEYDZl4ZwIER8 XDamxJV+6oTG+GKtKpHFkC4WPJkLthEuD34gr2xU8DFrU+y2Y5QNXi5wvSsBp8WS 6C/70HQEy35uSyOjbjVlPi0/UKoelVw9dCO7HZBOb9lTd88hC4Gx90KFwpq6Ievf L20VNgOESC2y6kRbuLNbhQVsbT2Ijyz9NccVM5owFEbHkXDxJ0vQVzrNM999DVjb CC2v0NZMLPNJQn2RvC172QBOsOERxIRkZdJHcifydl7i2QNpr8+/YSnS7OSx3dA/ 3ZmTLejaiGUXdTGEI9dHy77s+adwTzGsH+INKotQG8qwUXzCLuUWN3GGK+Qof5Rk jbsGAoZ7GQz1/7NdEOcGW6pxD4mllk3McKMzNlMmddRDUPhSUg3WXu0c1AWGzfA1 ulk6fQDaTUjvs7nokuozhguKz8OKrT6S7x/iES5tPbXLhuDqfnUdYiQ+7m2beRb5 L9S9KK95HXnKJAI9WLOELj1vCrfbCGjlwz8YVSrwPtwwzP/wbB1Ni6tmwLrxHbLk SGyJEMnPs3mARIPDwDysyOs+3OUSx04uYW6YTSh8XyKNIxTCflRxr/iM5YyYEMvt lXMrp1sh4hc= =5oFu -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "We get support for three new 32-bit SoC platforms this time. The amount of changes in arch/arm for any of them is miniscule, as all the interesting code is in device driver subsystems (irqchip, clk, pinctrl, ...) these days. I'm listing them here, as the addition of the Kconfig statement is the main relevant milestone for a new platform. In each case, some drivers are are shared with existing platforms, while other drivers are added for v4.7 as well, or come in a later release. - The Aspeed platform is probably the most interesting one, this is what most whitebox servers use as their baseboard management controller. We get support for the very common ast2400 and ast2500 SoCs. The OpenBMC project focuses on this chip, and the LWN article about their ELC 2016 presentation at https://lwn.net/Articles/683320/ triggered the submission, but the code comes from IBM's OpenPOWER team rather than the team at Facebook. There are still a lot more drivers that need to get added over time, and I hope both teams can work together on that. - OXNAS is an old platform for Network Attached Storage devices from Oxford Semiconductor. There are models with ARM10 (!) and ARM11MPCore cores, but for now, we only support the original ARM9 based versions. The product lineup was subsequently part of PLX, Avago and now the new Broadcom Ltd. https://wiki.openwrt.org/doc/hardware/soc/soc.oxnas has some more information. - V2M-MPS2 is a prototyping platform from ARM for their Cortex-M cores and is related to the existing Realview / Versatile Express lineup, but without MMU. We now support various NOMMU platforms, so adding a new one is fairly straightforward. http://infocenter.arm.com/help/topic/com.arm.doc.100112_0100_03_en/ has detailed information about the platform. Other noteworthy updates: - Work on LPC32xx has resumed, and Vladimir Zapolskiy and Sylvain Lemieux are now maintaining the platform. This is an older ARM9 based platform from NXP (not Freescale), but it remains in use in embedded markets. - Kevin Hilman is now co-maintaining the Amlogic Meson platform for both 32-bit and 64-bit ARM, and started contributing some patches. - As is often the case, work on the OMAP platforms makes up the bulk of the actual SoC code changes in arch/arm, but there isn't a lot of that either" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) MAINTAINERS: ARM/Amlogic: add co-maintainer, misc. updates MAINTAINERS: add ARM/NXP LPC32XX SoC specific drivers to the section MAINTAINERS: add new maintainers of NXP LPC32xx SoC MAINTAINERS: move ARM/NXP LPC32xx record to ARM section arm: Add Aspeed machine ARM: lpc32xx: remove duplicate const on lpc32xx_auxdata_lookup ARM: lpc32xx: remove leftovers of legacy clock source and provider drivers ARM: lpc32xx: remove reboot header file ARM: dove: Remove CLK_IS_ROOT ARM: orion5x: Remove CLK_IS_ROOT ARM: mv78xx0: Remove CLK_IS_ROOT ARM: davinci: da850: use clk->set_parent for async3 ARM: davinci: Move clock init after ioremap. MAINTAINERS: Update ARM Versatile Express platform entry ARM: vexpress/mps2: introduce MPS2 platform MAINTAINERS: add maintainer entry for ARM/OXNAS platform ARM: Add new mach-oxnas irqchip: versatile-fpga: add new compatible for OX810SE SoC ARM: uniphier: correct the call order of of_node_put() MAINTAINERS: fix stale TI DaVinci entries ... |
|
Linus Torvalds | a7fd20d1c4 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Highlights: 1) Support SPI based w5100 devices, from Akinobu Mita. 2) Partial Segmentation Offload, from Alexander Duyck. 3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE. 4) Allow cls_flower stats offload, from Amir Vadai. 5) Implement bpf blinding, from Daniel Borkmann. 6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is actually using FASYNC these atomics are superfluous. From Eric Dumazet. 7) Run TCP more preemptibly, also from Eric Dumazet. 8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e driver, from Gal Pressman. 9) Allow creating ppp devices via rtnetlink, from Guillaume Nault. 10) Improve BPF usage documentation, from Jesper Dangaard Brouer. 11) Support tunneling offloads in qed, from Manish Chopra. 12) aRFS offloading in mlx5e, from Maor Gottlieb. 13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo Leitner. 14) Add MSG_EOR support to TCP, this allows controlling packet coalescing on application record boundaries for more accurate socket timestamp sampling. From Martin KaFai Lau. 15) Fix alignment of 64-bit netlink attributes across the board, from Nicolas Dichtel. 16) Per-vlan stats in bridging, from Nikolay Aleksandrov. 17) Several conversions of drivers to ethtool ksettings, from Philippe Reynes. 18) Checksum neutral ILA in ipv6, from Tom Herbert. 19) Factorize all of the various marvell dsa drivers into one, from Vivien Didelot 20) Add VF support to qed driver, from Yuval Mintz" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits) Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m" Revert "phy dp83867: Make rgmii parameters optional" r8169: default to 64-bit DMA on recent PCIe chips phy dp83867: Make rgmii parameters optional phy dp83867: Fix compilation with CONFIG_OF_MDIO=m bpf: arm64: remove callee-save registers use for tmp registers asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions switchdev: pass pointer to fib_info instead of copy net_sched: close another race condition in tcf_mirred_release() tipc: fix nametable publication field in nl compat drivers: net: Don't print unpopulated net_device name qed: add support for dcbx. ravb: Add missing free_irq() calls to ravb_close() qed: Remove a stray tab net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fec-mpc52xx: use phydev from struct net_device bpf, doc: fix typo on bpf_asm descriptions stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fs-enet: use phydev from struct net_device ... |
|
Daniel Borkmann | 6077776b59 |
bpf: split HAVE_BPF_JIT into cBPF and eBPF variant
Split the HAVE_BPF_JIT into two for distinguishing cBPF and eBPF JITs. Current cBPF ones: # git grep -n HAVE_CBPF_JIT arch/ arch/arm/Kconfig:44: select HAVE_CBPF_JIT arch/mips/Kconfig:18: select HAVE_CBPF_JIT if !CPU_MICROMIPS arch/powerpc/Kconfig:129: select HAVE_CBPF_JIT arch/sparc/Kconfig:35: select HAVE_CBPF_JIT Current eBPF ones: # git grep -n HAVE_EBPF_JIT arch/ arch/arm64/Kconfig:61: select HAVE_EBPF_JIT arch/s390/Kconfig:126: select HAVE_EBPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES arch/x86/Kconfig:94: select HAVE_EBPF_JIT if X86_64 Later code also needs this facility to check for eBPF JITs. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
Vladimir Zapolskiy | 8cb17b5ed0 |
irqchip: Add LPC32xx interrupt controller driver
The change adds improved support of NXP LPC32xx MIC, SIC1 and SIC2 interrupt controllers. This is a list of new features in comparison to the legacy driver: * irq types are taken from device tree settings, no more need to hardcode them, * old driver is based on irq_domain_add_legacy, which causes problems with handling MIC hardware interrupt 0 produced by SIC1, * there is one driver for MIC, SIC1 and SIC2, no more need to handle them separately, e.g. have two separate handlers for SIC1 and SIC2, * the driver does not have any dependencies on hardcoded register offsets, * the driver is much simpler for maintenance, * SPARSE_IRQS option is supported. Legacy LPC32xx interrupt controller driver was broken since commit |
|
Arnd Bergmann | abb2c53a55 |
aspeed arch tag for 4.7
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCAAGBQJXMICzAAoJEGt2WQeBR3CeCD4P/A5a3DwE7hBTx3USQUAA88uC YPEc5KbjbTqDCWNUfUy89IjrNfk8cbrdo9uJ7XgxEnIwc4Xcc7LKqYOrKCqteZ/j JUs29VMIugTwWq53VJilK26Tjq1J3QkjIheU+roRNN65D3tBIstXh/jj1R1mSzXb 41BwUmzrVG4g1lhlwapCk8lVsZibWP/Z/jiL0yYnTkgG/Uye2J85qyO+aAt5zQyY BvdEH4e3lHX/ttOz4lru+ojGFeHusyF3iKlNzc4KOe8DnjR1TaYNzcZVPEDYY08M b3P252qFZflk8g5qmohjrQrdfxcnqPQjCDyxZRJsSeiLu+VELZBZeUXg146eMPUG szEQMURMXch/1X5ekiItPSk2K8W0UdVTgZ3R2Y9KwVBqi0AWoJ5+uIgTUYNV6VbQ 4miYb9dc4yyi+JiS66mL9ax3jbTzhQt9txWAAqr+yZ48j8i1gbFxQiJB/qieuDjx KCZeFs5mlb5y/fbbEVTGqBPC9TYx7tFE7xA/apoC6WEYdJnHQ37u5szG8+HMyQiq N917Rcz98ya8yyCNebjmWI7g8ol6o/zz/8EdpsB+1oVgFW7rKSuUrnFbjU82nAIB R8v7dA6C0weEy0IUJs0n+Cwq1XXfWU0gxK7eMpsaCgjnsAz8mVefB/54RRqfSaMT ybASdWPtBM6Ab1Tv/AQ/ =XUlQ -----END PGP SIGNATURE----- Merge tag 'aspeed-for-4.7-arch' of https://github.com/shenki/linux into next/soc Merge "aspeed arch tag for 4.7" from Joel Stanley <joel@jms.id.au>: This is the initial pull request for the Aspeed BMC SoCs. I put 4.7 in the subject for this and the subsequent requests but if it's a bit late in the cycle then I understand. Following review I got rid of the board file by pushing the functionality out to a watchdog and clock driver, so it's just the Kconfig bits. I've also added myself to maintainers for the Aspeed arch and drivers as I intend on looking after them. * tag 'aspeed-for-4.7-arch' of https://github.com/shenki/linux: arm: Add Aspeed machine |
|
Joel Stanley | 8c2ed9bcfb |
arm: Add Aspeed machine
Aspeed devices are a common Baseboard Management Controller (BMC) system on chip containing an ARM9 or ARM11 core, off-chip DDR RAM and support for a large number of peripherals. This patch adds basic support for the ast2400 and ast2500 machines, capable of booting to a prompt in QEMU (-M palmetto-bmc), on an Palmetto OpenPower development machine, and on the ast2500 EVB. Signed-off-by: Joel Stanley <joel@jms.id.au> |
|
Arnd Bergmann | 0d922f441d |
ARM: Add OXNAS Platform Support
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXHx7mAAoJEHfc29rIyEnRw9sP/1+WgrR8FNRFHtW97ZuHjQFd 8/9Vc84f4h0EyAO46zhPGckQLj+7bZBHpp04IGeA2jFaanl+eX+IWmrTmkhZee0Z oqVWzovxhcgpK322dj3X0ClEMwF422atjRV8NktWSPnQ0Fd7q8H6/LK77U6QVmC1 ftGTBWRXa78gNrT8wiuutR6/MImURjfPfGz7PbDLcm4hxjqFh38bZCko/VuyKGzH T+wUJpWBdQzd/ZiZylD836usGfz9lk7T1aIv7j0NKH7VrPidUsPp5RBlWSoxVqmA iCnSHBYEXoHVIsZ0457Q0WndiudoW/8Hj+zLsTfWns2CLfjrebsLK28AUAw4k+ol cwhVbxeQuuxEiEPPwbTAnkmK2sPF249VHFNrPgBZC8IBZXzcIPEvm6meWTwFAVPL 8WUsKdIY58MpHtKgq2VAdEN7Ys4lULJP+RKuMNBhJUZ4McTCAz61AebgtV/CGI1s 3E9hy86Fg6573po/i1fQGygIQ88NT/VJJSRaVExEtXc7MlW0n0l2cbzoVwwNW5PJ xw9ObN0WruWw/7knvAKvcz4PmNA1fMqL9TNi3CnjygR5HQjQnYR3+weVALosJFUH zZjGwvn16sBJq2ELXECTtMxsJHJaMDms4PZyFQ5taOdUote15nkvgTobvPMiKGEm VU0+mndEcuNSwldAC+hm =XtF2 -----END PGP SIGNATURE----- Merge tag 'ox810se-arm-v4.6-rc3' of https://github.com/superna9999/linux into next/soc Merge "ARM: Add OXNAS Platform Support" from Neil Armstrong This is for the ARM926 based ox810 chip used in some older NAS appliances. There is another related ox820 chip based on ARM11 that might get added here later. * tag 'ox810se-arm-v4.6-rc3' of https://github.com/superna9999/linux: MAINTAINERS: add maintainer entry for ARM/OXNAS platform ARM: Add new mach-oxnas irqchip: versatile-fpga: add new compatible for OX810SE SoC |
|
Vladimir Murzin | 1847119dcc |
ARM: vexpress/mps2: introduce MPS2 platform
The Cortex-M Prototyping System (or V2M-MPS2) is designed for prototyping and evaluation Cortex-M family of processors including the latest Cortex-M7 It comes with a range of useful peripherals including 8MB single cycle SRAM, 16MB PSRAM, Ethernet, QSVGA touch screen panel, 4bit RGB VGA connector, Audio, SPI and GPIO. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
|
Neil Armstrong | 8c9184b7d9 |
ARM: Add new mach-oxnas
Add mach-oxnas directory containing Kconfig. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> |
|
Linus Torvalds | 33b3d2e88c |
ARM: SoC platform updates for v4.6
Newly added support for additional SoCs: - Axis Artpec-6 SoC family - Allwinner A83T SoC - Mediatek MT7623 - NXP i.MX6QP SoC - ST Microelectronics stm32f469 microcontroller New features: - SMP support for Mediatek mt2701 - Big-endian support for NXP i.MX - DaVinci now uses the new DMA engine dma_slave_map - OMAP now uses the new DMA engine dma_slave_map - earlyprintk support for palmchip uart on mach-tango - delay timer support for orion Other: - Exynos PMU driver moved out to drivers/soc/ - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAVu68DGCrR//JCVInAQIHVQ//Wblms+NKj3aKh6m2Sscs/YkSbFaQ4sY2 rNyfxLIYsLXkth1kbdHRFSMyL68Ym+xutErgw/3HQPB2D1YtYJE3VJ/y8AU92SU3 oHyQIty+atB8d8zBbtlkWmat94NIfYf0I8PQETreGb1LMaJqAf0mDEDAyorTLZcZ UtQ817Ihn7urqwdTJpTO58V41RmY/vflbHI5T6bIjUJn6fF1e/7+VqtMIfq5sjJ6 0EPEQdu8s5AJ7gcGlGi9I5gAtSnWSA/9phAxul9P8/HrMpUWIxreSEAy8FY7W14F 4TON3sQrnw7nyA72U80KGIXhgLy7SbEmHcSqyy4YJK3ycdk6VYk0CBO7nWVYAiD1 knLisOH6jwe0LIj9WXiRR+Y2Q53pXN8SF77pLDahSnvuShnYEjEH5uELHtxe7Vxh gn+NH1rDkRTgdYgt4RWlVyUoLkddQWzLb1m4QyQlvxtTR25cJJayXdVX2MRrNPF5 c1zRa9HH+b8LJQIMdWfo/NoHhHtftkkGGsqHAAaypZqdpyk0j2HpJYk5ecPR4f5C /8o/h/5xOI9gEzp/DVYSZ1VAvRqBQGIDfKBXWq6GuoZaF0aN8ISe5IxFn5Yx2F46 fNaxqiNpWmyywl8D+tSWPFK6aE21AXKGi5zIzexZZqy283aDjlUPI+tgF2GKIuKP 3ayYTDeBpLI= =ynNj -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "Newly added support for additional SoCs: - Axis Artpec-6 SoC family - Allwinner A83T SoC - Mediatek MT7623 - NXP i.MX6QP SoC - ST Microelectronics stm32f469 microcontroller New features: - SMP support for Mediatek mt2701 - Big-endian support for NXP i.MX - DaVinci now uses the new DMA engine dma_slave_map - OMAP now uses the new DMA engine dma_slave_map - earlyprintk support for palmchip uart on mach-tango - delay timer support for orion Other: - Exynos PMU driver moved out to drivers/soc/ - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: uniphier: rework SMP code to support new System Bus binding ARM: uniphier: add missing of_node_put() ARM: at91: avoid defining CONFIG_* symbols in source code ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1 ARM: imx: Make reset_control_ops const ARM: imx: Do L2 errata only if the L2 cache isn't enabled ARM: imx: select ARM_CPU_SUSPEND only for imx6 dmaengine: pxa_dma: fix the maximum requestor line ARM: alpine: select the Alpine MSI controller driver ARM: pxa: add the number of DMA requestor lines dmaengine: mmp-pdma: add number of requestors dma: mmp_pdma: Add the #dma-requests DT property documentation ARM: OMAP2+: Add rtc hwmod configuration for ti81xx ARM: s3c24xx: Avoid warning for inb/outb ARM: zynq: Move early printk virtual address to vmalloc area ARM: DRA7: hwmod: Add custom reset handler for PCIeSS ARM: SAMSUNG: Remove unused register offset definition ARM: EXYNOS: Cleanup header files inclusion drivers: soc: samsung: Enable COMPILE_TEST MAINTAINERS: Add maintainers entry for drivers/soc/samsung ... |
|
Linus Torvalds | e88fa1b8b0 |
ARM: SoC cleanups for v4.6
A few simple cleanups across multiple platforms, not much standing out: - lpc32xx removes its private implementation of the clk API, after generic code was merged in 4.5 - all unused Makefile.boot files get removed - a number of simplifications for shmobile - asm/clkdev.h gets replaced with the asm-generic version after all mach/clkdev.h implementations are gone -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAVu67NGCrR//JCVInAQJoQw/+Mvbsb57ueA6Ao7l4/UpsNayKIuYZlrrQ afa6KMYzqPuQ9hWYAFMNM9amIHMX8aqoZTL29soezLYlcpGxeN49AJ1bXX+Qci8r DAiU2Z6SX3qXo396Fg8VTDNSfn3SvEPnp6X2GcaxrB349jeGJqFeABEnPcVkBBtE 18wxO1AbtsbOpwaGDCnndJOc0vYuRfkUAW0+3379jI7IGrZzq38sTGdmFmZ0HYCv DWFkUU/DPKVPnRIkZUCljUQXYYYiuvpZUXyZZPRUT/k6ujXmtjZJij9CAJkm9f0e dyv3aYIlp8+jSdWoT+58eSAsihyGPEwfgDE3xYxKm2ENxGgS1HQJYNDAm/j3Kj4J iX98bdBxKzZsHb64jNOeOVxs0xVvHSolo0oFM9sSIMgZ2hQZScXAj24Wd1sHyF0Y K+ru5g7oHQoaHLsyRn8buN8F+0ATv1A8Wecy6avAYvKYHhMV7WrgbiJlRGmS3PUH 8XiTNsQbiUJIvFafj38yStpPLc8jpf8LcAdql0T+JyMCd8+Ee+bpaswvJysmWKg7 12G7xaUyLhUP5DZn3mMM8UyI1/yoUk63igsT7eUsGLfLzSL25X1ATh24Cb8Gwf4f +HIv21zbUbgRrN3u+N2QRU46BESlfSp68Gjrth3p+1nvHISZpnEJ9ujcpRtCY7Ik uBSxUT21VN8= =ZTl9 -----END PGP SIGNATURE----- Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "A few simple cleanups across multiple platforms, not much standing out: - lpc32xx removes its private implementation of the clk API, after generic code was merged in 4.5 - all unused Makefile.boot files get removed - a number of simplifications for shmobile - asm/clkdev.h gets replaced with the asm-generic version after all mach/clkdev.h implementations are gone" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: shmobile: Kconfig: Get rid of old comment ARM: shmobile: Consolidate SCU mapping code arm: lpc32xx: remove direct control of GPIOs from shared mach file arm: lpc32xx: remove selected HAVE_IDE arm: lpc32xx: switch to common clock framework ARM: Use generic clkdev.h header ARM: plat-versatile: Remove unused clock.c file ARM: netx: remove redundant "depends on ARCH_NETX" ARM: integrator: remove redundant select in Kconfig ARM: drop unused Makefile.boot of Multiplatform SoCs ARM: mvebu: add missing of_node_put() ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code ARM: shmobile: Typo s/MIPDR/MPIDR/ ARM: shmobile: Add includes providing forward declarations ARM: shmobile: rcar-gen2: Make rcar_gen2_dma_contiguous static ARM: mv78xx0: use "depends on" instead of "if" after prompt |
|
Linus Torvalds | dae0b74eb7 |
ARM: SoC non-urgent fixes for v4.6
As usual, we queue up a few fixes that don't seem urgent enough to go in through -rc. - a number of randconfig warning fixes from Arnd - various small fixes for OMAP - one somewhat larger patch to restore the OMAP3 cpuidle tuning that was lost in a cleanup - a small regression fix for cns3xxx PCI -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAVu67XGCrR//JCVInAQK8mBAAjW3INXnuQ84Zvb5RLJS+1aiEEgnuOEwM Yvxr+MzSMsXS5V9FMGaUk/bXxfGMFILAQ5j471ZanGZkDZwAiJ2tdwreKlyYMHU3 9PPWtHKYR6BhIRFYovftVpDkbgw3cwdfyIvves7Aa4XyeGNCQjryNQndZci8IZlN 5I4ff3ea8ZKsDQ1jDXmYw6QENCZl9M4yatLnaOcfdgCRro5VRvdavqIofk+ynv2S McUm5WGr/BKiT92MThWIhIskuMNZiUmm7L3zgOYE2+zUgw6tFvreQvAY+qtxk6qt 0K4SIV04JGevBHl2CENGF1Kctq5z+n/Jcywd9yJBqYxvWMYgnJokczjkxKTyf9X8 8eU9LEtJsrAzJYw6TXvyjK0EphTJTwg1kO/wk4/HFIM2B+AzGgcbotakIDokrR/i I2rgnCqExQZqdUzhgFHg28a0Bx9y2Giu6wCCkwRZKpKW74d5E6esAsTbvggmXvbN 35G0MSLTeeZDbvN6xLOMZc7qCfyWlO9huxiHPn0Q9eth8RcqfywB4vbNdEli/P4o NW+up5wTo6Ifc9Jgf8z7LB9b56i/9LMkSBh/OdCKfHEZlHi5/dZ/TR21CngtpcX1 hi91vJLH0axCylBVE599qxJYoWjoR8nHz7kD6G4vqXtiTfVcxozUM5NKSD8AXn+Q NhYT2BTUh0o= =YJmM -----END PGP SIGNATURE----- Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-urgent fixes from Arnd Bergmann: "As usual, we queue up a few fixes that don't seem urgent enough to go in through -rc. - a number of randconfig warning fixes from Arnd - various small fixes for OMAP - one somewhat larger patch to restore the OMAP3 cpuidle tuning that was lost in a cleanup - a small regression fix for cns3xxx PCI" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) CNS3xxx: Fix PCI cns3xxx_write_config() MAINTAINERS: unify email addrs for Kevin Hilman CNS3xxx: remove unused *_VIRT definitions ARM: OMAP2+: Fix hwmod clock for l4_ls soc: TI knav_qmss: fix dma_addr_t printing ARM: prima2: always enable reset controller ARM: socfpga: hide unused functions ARM: ux500: fix ureachable iounmap() ARM: ks8695: fix __initdata annotation ARM: mvebu: mark mvebu_hwcc_pci_nb as __maybe_unused ARM: mv78xx0: avoid unused function warning ARM: orion: only select I2C_BOARDINFO when using I2C ARM: OMAP2+: Fix out of range register access with syscon_config.max_register ARM: OMAP3: Add cpuidle parameters table for omap3430 ARM: davinci: make I2C support optional ARM: davinci: DA8xx+DMx combined kernels need PATCH_PHYS_VIRT ARM: davinci: avoid unused mityomapl138_pn_info variable ARM: davinci: limit DT support to DA850 ARM: DRA7: hwmod: Add reset data for PCIe ARM: DRA7: hwmod: Fix OCP2SCP sysconfig ... |
|
Linus Torvalds | de06dbfa78 |
Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King: "Another mixture of changes this time around: - Split XIP linker file from main linker file to make it more maintainable, and various XIP fixes, and clean up a resulting macro. - Decompressor cleanups from Masahiro Yamada - Avoid printing an error for a missing L2 cache - Remove some duplicated symbols in System.map, and move vectors/stubs back into kernel VMA - Various low priority fixes from Arnd - Updates to allow bus match functions to return negative errno values, touching some drivers and the driver core. Greg has acked these changes. - Virtualisation platform udpates form Jean-Philippe Brucker. - Security enhancements from Kees Cook - Rework some Kconfig dependencies and move PSCI idle management code out of arch/arm into drivers/firmware/psci.c - ARM DMA mapping updates, touching media, acked by Mauro. - Fix places in ARM code which should be using virt_to_idmap() so that Keystone2 can work. - Fix Marvell Tauros2 to work again with non-DT boots. - Provide a delay timer for ARM Orion platforms" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (45 commits) ARM: 8546/1: dma-mapping: refactor to fix coherent+cma+gfp=0 ARM: 8547/1: dma-mapping: store buffer information ARM: 8543/1: decompressor: rename suffix_y to compress-y ARM: 8542/1: decompressor: merge piggy.*.S and simplify Makefile ARM: 8541/1: decompressor: drop redundant FORCE in Makefile ARM: 8540/1: decompressor: use clean-files instead of extra-y to clean files ARM: 8539/1: decompressor: drop more unneeded assignments to "targets" ARM: 8538/1: decompressor: drop unneeded assignments to "targets" ARM: 8532/1: uncompress: mark putc as inline ARM: 8531/1: turn init_new_context into an inline function ARM: 8530/1: remove VIRT_TO_BUS ARM: 8537/1: drop unused DEBUG_RODATA from XIP_KERNEL ARM: 8536/1: mm: hide __start_rodata_section_aligned for non-debug builds ARM: 8535/1: mm: DEBUG_RODATA makes no sense with XIP_KERNEL ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs ARM: make the physical-relative calculation more obvious ARM: 8512/1: proc-v7.S: Adjust stack address when XIP_KERNEL ARM: 8411/1: Add default SPARSEMEM settings ARM: 8503/1: clk_register_clkdev: remove format string interface ARM: 8529/1: remove 'i' and 'zi' targets ... |
|
Bogicevic Sasa | 5f8fc43217 |
PCI: Include pci/pcie/Kconfig directly from pci/Kconfig
Include pci/pcie/Kconfig directly from pci/Kconfig, so arches don't have to source both pci/Kconfig and pci/pcie/Kconfig. Note that this effectively adds pci/pcie/Kconfig to the following arches, because they already sourced drivers/pci/Kconfig but they previously did not source drivers/pci/pcie/Kconfig: alpha avr32 blackfin frv m32r m68k microblaze mn10300 parisc sparc unicore32 xtensa [bhelgaas: changelog, source pci/pcie/Kconfig at top of pci/Kconfig, whitespace] Signed-off-by: Sasa Bogicevic <brutallesale@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
|
Arnd Bergmann | 1c277cae14 |
This is the pxa changes for v4.6 cycle.
This is a minor cycle with : - cleanup fixes from Arnd, mainly build oriented and sparse type ones - dma fixes for requestors above 32 (impacting mainly camera driver) - some minor cleanup on pxa3xx device-tree side -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW0Y3SAAoJEAP2et0duMsSfesQAIGKccj/WRWtlCxje+8Aj3UW eu6vV9xGVBZu0RJxCchwCBP5ZO8WSvXBYvX5MIaBH2TFdJqJEjie6ES4mRlGVuup XMUZybcFOu9N5j0WMddj2OHhEeYGgMsSZwSOgK4nsQ/eyhrcI5fjykdafmPKywjW +/USV90ucVp+38C+yg4yXSuI8FOEABIn6VoX//+YpDZetvIoJCUQne1g+uPE2YoF dcPqVbY2OeAvuABkI3Wqdrc3Ico9i8Ns8erg8EuDe5xv2TvJXhn/mIeoVNZ2s4So 5aCD87RQu3rwDfqAv6FzW06k9AYAE/p/VKh0smI12D8MCxhSD0EZP+jBfDvuwx/n IICMH7YuunRSRe7VDFgWyIz7wduHQu3xctF9scSYZD+kBpvAD274sZs9WYs4fGd6 hXxxV4iXrP8af6A+sddDeo0Gq25jC7JoL43YlQTUzBMqbrzK4W3c0dXCib6hh/eN W/YVdPERGs9cTG/IZFbn3cn1QIYdA4exNoE38txWkKpeiVxu0tZKSsg6m9xCPu7+ vMQj1m8E8mkgiMq0BJnei02QC8Xw5ekf4wNUsLOOou29c7CTt3zicM8YtnDmANV2 fIIT4BK0izIZj4N0RZp9KT6h/IkF1VHRz3pcw3vYXJLbaKqHk/6doDUW30E/Ol1f PzJedKaWujhOV1DG1SLb =lBYC -----END PGP SIGNATURE----- Merge tag 'pxa-for-4.6' of https://github.com/rjarzmik/linux into next/soc Merge "pxa changes for v4.6 cycle" from Robert Jarzmik: This is a minor cycle with : - cleanup fixes from Arnd, mainly build oriented and sparse type ones - dma fixes for requestors above 32 (impacting mainly camera driver) - some minor cleanup on pxa3xx device-tree side * tag 'pxa-for-4.6' of https://github.com/rjarzmik/linux: dmaengine: pxa_dma: fix the maximum requestor line ARM: pxa: add the number of DMA requestor lines dmaengine: mmp-pdma: add number of requestors dma: mmp_pdma: Add the #dma-requests DT property documentation ARM: pxa: pxa3xx device-tree support cleanup ARM: pxa: don't select RFKILL if CONFIG_NET is disabled ARM: pxa: fix building without IWMMXT ARM: pxa: move extern declarations to pm.h ARM: pxa: always select one of the two CPU types ARM: pxa: don't select GPIO_SYSFS for MIOA701 ARM: pxa: mark unused eseries code as __maybe_unused ARM: pxa: mark spitz_card_pwr_ctrl as __maybe_unused ARM: pxa: define clock registers as __iomem |
|
Lars Persson | 590b460c3e |
arm: initial machine port for artpec-6 SoC
Basic machine port for the Artpec-6 SoC from Axis Communications. Signed-off-by: Lars Persson <larper@axis.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net> |
|
Arnd Bergmann | 9e0087e64e |
ARM: 8530/1: remove VIRT_TO_BUS
All drivers that are relevant for rpc or footbridge have stopped using virt_to_bus a while ago, so we can remove it and avoid some harmless randconfig warnings for drivers that we do not care about: drivers/atm/zatm.c: In function 'poll_rx': drivers/atm/zatm.c:401:18: warning: 'bus_to_virt' is deprecated [-Wdeprecated-declarations] skb = ((struct rx_buffer_head *) bus_to_virt(here[2]))->skb; FWIW, the remaining drivers using this are: ATM: firestream, zatm, ambassador, horizon ISDN: hisax/netjet V4L: STA2X11, zoran Net: Appletalk LTPC, Tulip DE4x5, Toshiba IrDA WAN: comtrol sv11, cosa, lanmedia, sealevel SCSI: DPT_I2O, buslogic VME: CA91C142 My best guess is that all of the above are so hopelessly obsolete that we are best off removing all of them form the kernel, but that can be done another time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Arnd Bergmann | ce32c5c5a3 |
ARM: davinci: DA8xx+DMx combined kernels need PATCH_PHYS_VIRT
We already forbid that combination when AUTO_ZRELADDR is disabled, for the same reason that the two have their RAM at different physical addresses as seen from the CPU. This does the same change for PATCH_PHYS_VIRT: if you disable either of the options, Kconfig now enforces that you have to pick one or the other SoC family. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sekhar Nori <nsekhar@ti.com> |
|
Lorenzo Pieralisi | 8b6f2499ac |
ARM: 8511/1: ARM64: kernel: PSCI: move PSCI idle management code to drivers/firmware
ARM64 PSCI kernel interfaces that initialize idle states and implement the suspend API to enter them are generic and can be shared with the ARM architecture. To achieve that goal, this patch moves ARM64 PSCI idle management code to drivers/firmware, so that the interface to initialize and enter idle states can actually be shared by ARM and ARM64 arches back-ends. The ARM generic CPUidle implementation also requires the definition of a cpuidle_ops section entry for the kernel to initialize the CPUidle operations at boot based on the enable-method (ie ARM64 has the statically initialized cpu_ops counterparts for that purpose); therefore this patch also adds the required section entry on CONFIG_ARM for PSCI so that the kernel can initialize the PSCI CPUidle back-end when PSCI is the probed enable-method. On ARM64 this patch provides no functional change. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arch/arm64] Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Jisheng Zhang <jszhang@marvell.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Lorenzo Pieralisi | 1b9bdf5c16 |
ARM: 8510/1: rework ARM_CPU_SUSPEND dependencies
The code enabled by the ARM_CPU_SUSPEND config option is used by kernel subsystems for purposes that go beyond system suspend so its config entry should be augmented to take more default options into account and avoid forcing its selection to prevent dependencies override. To achieve this goal, this patch reworks the ARM_CPU_SUSPEND config entry and updates its default config value (by adding the BL_SWITCHER option to it) and its dependencies (ARCH_SUSPEND_POSSIBLE), so that the symbol is still selected by default by the subsystems requiring it and at the same time enforcing the dependencies correctly. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Vladimir Zapolskiy | 1465e98a2c |
arm: lpc32xx: remove selected HAVE_IDE
NXP LPC32xx platform does not have any controller capable for disk drives, selection of HAVE_IDE is not needed. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> |
|
Vladimir Zapolskiy | c227f127e3 |
arm: lpc32xx: switch to common clock framework
The change switches NXP LPC32xx platforms to LPC32xx clock driver powered by common clock framework, this obsoletes mach-lpc32xx/clock.o legacy clock driver and thus it is removed. Legacy timer driver mach-lpc32xx/timer.o strictly depends on legacy clock support, but fortunately an existing LPC32xx clock source and clock event driver completely replaces it, and thus it can be removed as well. Noticeably platform UART driver directly operates on LPC32xx source control block registers, remove this dependency to avoid overlapping with common clock framework driver, also this guarantees that UART is working expectedly. Tested-by: Sylvain Lemieux <slemieux@tycoint.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> |
|
Arnd Bergmann | 2f20286159 |
ARM: pxa: always select one of the two CPU types
When all boards are disabled on PXA, we cannot build a kernel because no CPU gets selected: arch/arm/include/uapi/asm/swab.h:26:29: error: "__LINUX_ARM_ARCH__" is not defined [-Werror=undef] This is a bit annoying for compile-testing, so I'm adding a line that ensures that at all times, at least one of CPU_XSCALE or CPU_XSC3 is set and we can at least continue building. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> |
|
Maxime Coquelin | f64e980450 |
ARM: mach-stm32: Select pinctrl
Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> |
|
Maxime Coquelin | fa65fc6b8e |
ARM: Kconfig: Introduce MACH_STM32F429 flag
This patch introduces the MACH_STM32F429 to make possible to only select STM32F429 pinctrl driver. By default, all the MACH_STM32Fxxx flags will be set with STM32 defconfig. Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Linus Walleij <linux.walleij@linaro.org> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> |
|
Linus Torvalds | eae21770b4 |
Merge branch 'akpm' (patches from Andrew)
Merge third patch-bomb from Andrew Morton: "I'm pretty much done for -rc1 now: - the rest of MM, basically - lib/ updates - checkpatch, epoll, hfs, fatfs, ptrace, coredump, exit - cpu_mask simplifications - kexec, rapidio, MAINTAINERS etc, etc. - more dma-mapping cleanups/simplifications from hch" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits) MAINTAINERS: add/fix git URLs for various subsystems mm: memcontrol: add "sock" to cgroup2 memory.stat mm: memcontrol: basic memory statistics in cgroup2 memory controller mm: memcontrol: do not uncharge old page in page cache replacement Documentation: cgroup: add memory.swap.{current,max} description mm: free swap cache aggressively if memcg swap is full mm: vmscan: do not scan anon pages if memcg swap limit is hit swap.h: move memcg related stuff to the end of the file mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online mm: vmscan: pass memcg to get_scan_count() mm: memcontrol: charge swap to cgroup2 mm: memcontrol: clean up alloc, online, offline, free functions mm: memcontrol: flatten struct cg_proto mm: memcontrol: rein in the CONFIG space madness net: drop tcp_memcontrol.c mm: memcontrol: introduce CONFIG_MEMCG_LEGACY_KMEM mm: memcontrol: allow to disable kmem accounting for cgroup2 mm: memcontrol: account "kmem" consumers in cgroup2 memory controller mm: memcontrol: move kmem accounting code to CONFIG_MEMCG mm: memcontrol: separate kmem code from legacy tcp accounting code ... |
|
Linus Torvalds | 1305eda751 |
ARM: SoC platform updates for v4.5
Updates for new platform support: - New platform: Tango4 from Sigma Designs. - Broadcom BCM2836 (Raspberry Pi 2 SoC) - Enable cpufreq on Freescale i.MX7D - Rockchip: SMP support for rk3036, general support for rk3228 - SMP support on Broadcom Kona and NSP - Cleanups for OMAP removing legacy IOMMU data + a bunch of misc fixes and tweaks for various platforms. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWnrvIAAoJEIwa5zzehBx3j0oP/i1WKGraSHS/w29ms4vfisFW bteUAsgh9aG8GCp/kigjmdMbWMdCRQfXp4D+o+SSr2DcM0q2iZzXV2WTeQ6YPAJM Fn431nuPn37ULd9PXdEhgiTDfDmVpvZrHeIQpDxC/TccRj4hkbxkMn6+s5WGkJLR DAr3h2mjKgulKZ4Wlj30rOxTDO9kVqTTIxjZXhbmMxepgMihSpvRGMXbKjxVHDSe NdCoIlfjhu6trr9d39b3POQVDCtrr82WvgrlfrhZZW6YXq7dIb3hhM1RldHCM+a7 mnNDMoVDCEjLM7WLkgoOzsX4j+MyCbrsBY9DV9Zs7MtntWGcD+oH0M+ZLjrtlPef vebi+yBh/JH9fyrOiusSzbRaimy5o/NO/tYFgEAh/zk6GhwJwBYBvM1nexnfSHhv LMY+nSrgZYdN9qHurwjaBmAAmp8u0XZIz/MLQA4WpoqqoAcV2X3gtMcQMdL+nio5 sUlE60/BcXjHqp/gt3MblxZy2WVzklCuqprOSYxhPwFDx7i9SKb9erSyzEkmzQDP UU+8Bory8egR537GaxM+izq9LQ3HLpWnyGPXSGx1s0vzNpZTsYC49eFK44vJRtLK QOlFG1VAupFP5S7kDneXJ8KoWcOwG3OccPfPTvyaC8SIezjXrKDgISV2mHOghYlk uNYO2fcyBoUX9jG3dUy8 =FP4V -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Updates for new platform support: - New platform: Tango4 from Sigma Designs. - Broadcom BCM2836 (Raspberry Pi 2 SoC) - Enable cpufreq on Freescale i.MX7D - Rockchip: SMP support for rk3036, general support for rk3228 - SMP support on Broadcom Kona and NSP - Cleanups for OMAP removing legacy IOMMU data + a bunch of misc fixes and tweaks for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: tango: Fix UP build issues ARM: tango: pass ARM arch level for smc.S ARM: bcm2835: Add Kconfig support for bcm2836 ARM: OMAP2+: Add support for dm814x and dra62x usb ARM: OMAP2+: Add mmc hwmod entries for dm814x ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx ARM: OMAP2+: Fix SoC detection for dra62x j5-eco ARM: tango4: Initial platform support ARM: bcm2835: Add a compat string for bcm2836 machine probe dt-bindings: Add root properties for Raspberry Pi 2 ARM: imx: select SRC for i.MX7 ARM: uniphier: select PINCTRL ARM: OMAP2+: Remove device creation for omap-pcm-audio ARM: OMAP1: Remove device creation for omap-pcm-audio ARM: rockchip: enable support for RK3228 SoCs ARM: rockchip: use const and __initconst for rk3036 smp_operations ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER ARM: BCM: Add SMP support for Broadcom 4708 ARM: BCM: Add SMP support for Broadcom NSP ARM: BCM: Clean up SMP support for Broadcom Kona ... |
|
Linus Torvalds | 6b5a12dbca |
ARM: SoC multiplatform code changes for v4.5
This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIUAwUAVqAGcmCrR//JCVInAQLDog/4x9F0PHGmZhexGfFOpi2Od63Jjx55izRU zRXqRjjFjambOrZuOx8lEGDy/qzqKbsDU8D1P4IUugkDr2bLSXv+NTLZL1kNBIdm YOlJhw/BmzLYqauOHmBzGhtv1FDUk3rqbgTsP5tTWj5LpSkwjmqui3HBZpi+f3Rr YOn+NeQSARiw+51D0b106a9RFshQXRGgn5m3xFjLWhJqshb2z2Ew5cogX/zdwrrM ss1BFomxsvgk6S+snN6v7cEX2iXe3r89qNR5jEW5BgNpQGFsAUeXPr9zzH07L/Qq O7XLw9jt5MX/X5372zVHPb57WoflLbF9cFaaDUZV3eTqt3lC67BTxOtYIdC2i90k E5GYlsy88CRwT2EO+ok/6UTryph+hVv7JqHfbKfnISrbraMCK36DtDTpBIpZ9uYF rRB7ncJZUWBcyoe+qvitSl+2KV54iB1ez2RXsketxM98dDZsfB2M2ImFou1F/Pgg ALvpifPubi/uDe7xNUsSuaT6/3jAomBuNsxnkYJ3NeiH/+duZbOYGkzK/LlcjZyc UrA0IpLfwIFsBNzwfpZPZ1lkEu8Y1YZZ+Hv9k65q1wMuBDgrFI5zUeYrPZi4pN9T Yo1xP9FstVLDouJrpGZo12VIIxR1UBeGqfRI/BZ58LEF3PRq/g2OVFsdQia5gZKr ddiJKSL1Vw== =z1AW -----END PGP SIGNATURE----- Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ... |
|
Linus Torvalds | 5083c54264 |
ARM: SoC cleanups for v4.5
A smallish number of general cleanup commits this release cycle. Some of these are minor tweaks: - shmobile change of binding for their GIC (using arm,pl390 now) - ARCH_RENESAS introduction - Misc other renesas updates There's also a couple of treewide commits from Masahiro Yamada cleaning up const/__initconst for SMP operation structs and a switch to using "depends on" instead of if-constructs on most of the Kconfig platform targets. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWnrTOAAoJEIwa5zzehBx3khsQAKCH1YZfI6AcY0+4z2Kmn/vK 7M86Fnmfa13ju+Iub5YuVsVFVAZ/TGTEVWoiUBMEb73IO0D5Jdl97BhJqV8Kv9Uy jz6PZGXDMJjjkts6N0ehYyu+8WbRvxtVbMNqVD/CO6CH1096UVnxgRz9uTmgJ9Z7 81EDJH4QPPg/zZR/GNV/STf4FKjlcAAN7Vo+5+m12RIptZXXkbGSL3Y6NZAyFlVB JNK5jFcabhD08DsCKa4YzbuubiQO5qiXdoxX+u/OyQWjupxM9YE5gAcna9o4V3FY Y6KnCPcy0XHCkIYk26MITXghr7UFLq9LdD2+s5Ab4HP1XZukw4TUUKd3gwCjCY2h 8RPIfvM7cJmiU3flY56A076Pg+Y35gfMQr+VDe2gMzWtrgCONWma+tHj2JSnNBkv 4I615hysQ46rzgsbpnI/yOQoXTlQH0qsNPjOlsXuRIlC4feNaw2FPTtT4dqEIXjE l7/LeHuu3217/yp2w37OrtMue4C9UZCHVSnHiV6hJgjdS+9UNRWAXMUAqWApSOam 5MPdZ/93+66gSrCdJG1KUhcw4F9MGawLAe4A41Eq7gWDbiJVDcZhRczK+Q79MNKo KvoLWAED+85qS5Z8k/1Ko9NNnl4c4kNR8fAKqD5qcEes7WGLIO1F2/RfC1zMmJfk kHYcwx4sBVPsBHDsAiPN =pQaP -----END PGP SIGNATURE----- Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "A smallish number of general cleanup commits this release cycle. Some of these are minor tweaks: - shmobile change of binding for their GIC (using arm,pl390 now) - ARCH_RENESAS introduction - Misc other renesas updates There's also a couple of treewide commits from Masahiro Yamada cleaning up const/__initconst for SMP operation structs and a switch to using "depends on" instead of if-constructs on most of the Kconfig platform targets" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: staging: board: armadillo800eva: Use "arm,pl390" staging: board: kzm9d: Use "arm,pl390" ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GIC ARM: shmobile: emev2 dtsi: Use "arm,pl390" for GIC ARM: shmobile: r8a7740 dtsi: Use "arm,pl390" for GIC ARM: shmobile: r7s72100 dtsi: Use "arm,pl390" for GIC ARM: use "depends on" for SoC configs instead of "if" after prompt ARM/clocksource: use automatic DT probing for ux500 PRCMU ARM: use const and __initconst for smp_operations ARM: hisi: do not export smp_operations structures ARM: mvebu: remove unused mach/gpio.h ARM: shmobile: Remove legacy mach/irqs.h ARM: shmobile: Introduce ARCH_RENESAS MAINTAINERS: Remove link to oss.renesas.com which is closed |
|
Christoph Hellwig | e1c7e32453 |
dma-mapping: always provide the dma_map_ops based implementation
Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Will Deacon | da48d094ce |
Kconfig: remove HAVE_LATENCYTOP_SUPPORT
As illustrated by commit |
|
Daniel Cashman | e0c25d958f |
arm: mm: support ARCH_MMAP_RND_BITS
arm: arch_mmap_rnd() uses a hard-code value of 8 to generate the random offset for the mmap base address. This value represents a compromise between increased ASLR effectiveness and avoiding address-space fragmentation. Replace it with a Kconfig option, which is sensibly bounded, so that platform developers may choose where to place this compromise. Keep 8 as the minimum acceptable value. [arnd@arndb.de: ARM: avoid ARCH_MMAP_RND_BITS for NOMMU] Signed-off-by: Daniel Cashman <dcashman@google.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Don Zickus <dzickus@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Rientjes <rientjes@google.com> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Nick Kralevich <nnk@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Borislav Petkov <bp@suse.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Linus Torvalds | d080827f85 |
libnvdimm for 4.5
1/ Media error handling: The 'badblocks' implementation that originated in md-raid is up-levelled to a generic capability of a block device. This initial implementation is limited to being consulted in the pmem block-i/o path. Later, 'badblocks' will be consulted when creating dax mappings. 2/ Raw block device dax: For virtualization and other cases that want large contiguous mappings of persistent memory, add the capability to dax-mmap a block device directly. 3/ Increased /dev/mem restrictions: Add an option to treat all io-memory as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access while a driver is actively using an address range. This behavior is controlled via the new CONFIG_IO_STRICT_DEVMEM option and can be overridden by the existing "iomem=relaxed" kernel command line option. 4/ Miscellaneous fixes include a 'pfn'-device huge page alignment fix, block device shutdown crash fix, and other small libnvdimm fixes. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWlrhjAAoJEB7SkWpmfYgCFbAQALKsQfFwT6JFS+zlPgiNpbqw 2VMNKEH0AfGYGj96mT02j2q+vSUmXLMIDMTsbe0sDdtwFZtQbFmhmryzPWUVppSu KGTlLPW8vuEhQVs91+UI3BQKkvpi0+tbR8hPOh9W6QhjpRT+lyHFKnsNR5HZy5wB K4/VMaT5ffd5/pXRTjkYiPQYTwWyfcvNjICj0YtqhPvOwS031m77JpFsWJ8HSpEX K99VlzNUPMXd1pYkHmFNXWw52fhRGNhwAEomLeKMdQfKms+KnbKp8BOSA0aCqU8E kpujQcilDXJwykFQZOFI3Z5Dxvrv8lxFTU8HRMBvo3ESzfTWjfqcvyjGOjDUcruw ihESFSJtdZzhrBiMnf9RRqSpMFJvAT8MVT6Q4D3mZUHCMPbUqFJsQjMPt9hEH3ho 4F0D2lesOCkubUKFTZmjMoDb+szuKbVhYK8TeFVVEhizinc/Aj0NKuazJqi+CXB/ xh0ER4ZxD8wvzqFFWvS5UvR1G9I5fr7+3jGRUrqGLHlSdeXP9dkEg28ao3QbWk3x 1dPOen6ZqQ9WJ/E7eGmXbVEz2R4Xd79hMXQzdQwmKDk/KbxRoAp7hyU8BslAyrBf HCdmVt+RAgrxZYfFRXuLhqwEBThJnNrgZA3qu74FUpkpFg6xRUu1bAYBiF7N+bFi 82b5UbMkveBTtkXjJoiR =7V5r -----END PGP SIGNATURE----- Merge tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The bulk of this has appeared in -next and independently received a build success notification from the kbuild robot. The 'for-4.5/block- dax' topic branch was rebased over the weekend to drop the "block device end-of-life" rework that Al would like to see re-implemented with a notifier, and to address bug reports against the badblocks integration. There is pending feedback against "libnvdimm: Add a poison list and export badblocks" received last week. Linda identified some localized fixups that we will handle incrementally. Summary: - Media error handling: The 'badblocks' implementation that originated in md-raid is up-levelled to a generic capability of a block device. This initial implementation is limited to being consulted in the pmem block-i/o path. Later, 'badblocks' will be consulted when creating dax mappings. - Raw block device dax: For virtualization and other cases that want large contiguous mappings of persistent memory, add the capability to dax-mmap a block device directly. - Increased /dev/mem restrictions: Add an option to treat all io-memory as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access while a driver is actively using an address range. This behavior is controlled via the new CONFIG_IO_STRICT_DEVMEM option and can be overridden by the existing "iomem=relaxed" kernel command line option. - Miscellaneous fixes include a 'pfn'-device huge page alignment fix, block device shutdown crash fix, and other small libnvdimm fixes" * tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (32 commits) block: kill disk_{check|set|clear|alloc}_badblocks libnvdimm, pmem: nvdimm_read_bytes() badblocks support pmem, dax: disable dax in the presence of bad blocks pmem: fail io-requests to known bad blocks libnvdimm: convert to statically allocated badblocks libnvdimm: don't fail init for full badblocks list block, badblocks: introduce devm_init_badblocks block: clarify badblocks lifetime badblocks: rename badblocks_free to badblocks_exit libnvdimm, pmem: move definition of nvdimm_namespace_add_poison to nd.h libnvdimm: Add a poison list and export badblocks nfit_test: Enable DSMs for all test NFITs md: convert to use the generic badblocks code block: Add badblock management for gendisks badblocks: Add core badblock management code block: fix del_gendisk() vs blkdev_ioctl crash block: enable dax for raw block devices block: introduce bdev_file_inode() restrict /dev/mem to idle io memory ranges arch: consolidate CONFIG_STRICT_DEVM in lib/Kconfig.debug ... |
|
Linus Torvalds | c9bed1cf51 |
xen: features and fixes for 4.5-rc0
- Stolen ticks and PV wallclock support for arm/arm64. - Add grant copy ioctl to gntdev device. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJWk5IUAAoJEFxbo/MsZsTRLxwH/1BDcrbQDRc5hxUOG9JEYSUt H/lMjvZRShPkzweijdNon95ywAXhcSbkS9IV2Mp0+CZV7VyeymW7QIW/g4+G6iRg +LnoV77PAhPv/cmsr1pENXqRCclvemlxQOf7UyWLezuKhB71LC+oNaEnpk/tPIZS et/qef+m/SgSP5R91nO0Esv2KfP7za0UrgJf3Ee4GzjSeDkya0Hko06Cy3yc1/RT 082kHpQ1/KFcHHh2qhdCQwyzhq/cwFkuDA6ksKYJoxC6YAVC2mvvkuIOZYbloHDL c/dzuP9qjjxOZ7Gblv2cmg+RE4UqRfBhxmMycxSCcwW/Mt5LaftCpAxpBQKq2/8= =6F/q -----END PGP SIGNATURE----- Merge tag 'for-linus-4.5-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Xen features and fixes for 4.5-rc0: - Stolen ticks and PV wallclock support for arm/arm64 - Add grant copy ioctl to gntdev device" * tag 'for-linus-4.5-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/gntdev: add ioctl for grant copy x86/xen: don't reset vcpu_info on a cancelled suspend xen/gntdev: constify mmu_notifier_ops structures xen/grant-table: constify gnttab_ops structure xen/time: use READ_ONCE xen/x86: convert remaining timespec to timespec64 in xen_pvclock_gtod_notify xen/x86: support XENPF_settime64 xen/arm: set the system time in Xen via the XENPF_settime64 hypercall xen/arm: introduce xen_read_wallclock arm: extend pvclock_wall_clock with sec_hi xen: introduce XENPF_settime64 xen/arm: introduce HYPERVISOR_platform_op on arm and arm64 xen: rename dom0_op to platform_op xen/arm: account for stolen ticks arm64: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops arm: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops missing include asm/paravirt.h in cputime.c xen: move xen_setup_runstate_info and get_runstate_snapshot to drivers/xen/time.c |
|
Linus Torvalds | 01e9d22638 |
Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King: - UEFI boot and runtime services support for ARM from Ard Biesheuvel and Roy Franz. - DT compatibility with old atags booting protocol for Nokia N900 devices from Ivaylo Dimitrov. - PSCI firmware interface using new arm-smc calling convention from Jens Wiklander. - Runtime patching for udiv/sdiv instructions for ARMv7 CPUs that support these instructions from Nicolas Pitre. - L2x0 cache updates from Dirk B and Linus Walleij. - Randconfig fixes from Arnd Bergmann. - ARMv7M (nommu) updates from Ezequiel Garcia * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (34 commits) ARM: 8481/2: drivers: psci: replace psci firmware calls ARM: 8480/2: arm64: add implementation for arm-smccc ARM: 8479/2: add implementation for arm-smccc ARM: 8478/2: arm/arm64: add arm-smccc ARM: 8494/1: mm: Enable PXN when running non-LPAE kernel on LPAE processor ARM: 8496/1: OMAP: RX51: save ATAGS data in the early boot stage ARM: 8495/1: ATAGS: move save_atags() to arch/arm/include/asm/setup.h ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode ARM: 8482/1: l2x0: make it possible to disable outer sync from DT ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI ARM: 8487/1: Remove IPI_CALL_FUNC_SINGLE ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend hook ARM: 8484/1: Documentation: l2c2x0: Mention separate controllers explicitly ARM: 8483/1: Documentation: l2c: Rename l2cc to l2c2x0 ARM: 8477/1: runtime patch udiv/sdiv instructions into __aeabi_{u}idiv() ARM: 8476/1: VDSO: use PTR_ERR_OR_ZERO for vma check ARM: 8453/2: proc-v7.S: don't locate temporary stack space in .text section ARM: add UEFI stub support ARM: wire up UEFI init and runtime support ARM: only consider memblocks with NOMAP cleared for linear mapping ... |
|
Russell King | 6660800fb7 | Merge branch 'devel-stable' into for-linus | |
Linus Torvalds | b4cee21ee0 |
Merge branches 'timers-core-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates - and a leftover fix - from Thomas Gleixner: "A rather large (commit wise) update from the timer side: - A bulk update to make compile tests work in the clocksource drivers - An overhaul of the h8300 timers - Some more Y2038 work - A few overflow prevention checks in the timekeeping/ntp code - The usual pile of fixes and improvements to the various clocksource/clockevent drivers and core code" Also: "A single fix for the posix-clock poll code which did not make it into 4.4" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits) clocksource/drivers/acpi_pm: Convert to pr_* macros clocksource: Make clocksource validation work for all clocksources timekeeping: Cap adjustments so they don't exceed the maxadj value ntp: Fix second_overflow's input parameter type to be 64bits ntp: Change time_reftime to time64_t and utilize 64bit __ktime_get_real_seconds timekeeping: Provide internal function __ktime_get_real_seconds clocksource/drivers/h8300: Use ioread / iowrite clocksource/drivers/h8300: Initializer cleanup. clocksource/drivers/h8300: Simplify delta handling clocksource/drivers/h8300: Fix timer not overflow case clocksource/drivers/h8300: Change to overflow interrupt clocksource/drivers/lpc32: Correct pr_err() output format clocksource/drivers/arm_global_timer: Fix suspend resume clocksource/drivers/pistachio: Fix wrong calculated clocksource read value clockevents/drivers/arm_global_timer: Use writel_relaxed in gt_compare_set clocksource/drivers/dw_apb_timer: Inline apbt_readl and apbt_writel clocksource/drivers/dw_apb_timer: Use {readl|writel}_relaxed in critical path clocksource/drivers/dw_apb_timer: Fix apbt_readl return types clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_init clocksource/drivers/h8300: Increase the compilation test coverage ... * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-clock: Fix return code on the poll method's error path |
|
Dan Williams | 21266be9ed |
arch: consolidate CONFIG_STRICT_DEVM in lib/Kconfig.debug
Let all the archs that implement devmem_is_allowed() opt-in to a common definition of CONFIG_STRICT_DEVM in lib/Kconfig.debug. Cc: Kees Cook <keescook@chromium.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [heiko: drop 'default y' for s390] Acked-by: Ingo Molnar <mingo@redhat.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
|
Russell King | 598bcc6ea6 | Merge branches 'misc' and 'misc-rc6' into for-linus | |
Jens Wiklander | e679660dbb |
ARM: 8481/2: drivers: psci: replace psci firmware calls
Switch to use a generic interface for issuing SMC/HVC based on ARM SMC Calling Convention. Removes now the now unused psci-call.S. Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Jens Wiklander | b329f95d70 |
ARM: 8479/2: add implementation for arm-smccc
Adds implementation for arm-smccc and enables CONFIG_HAVE_SMCCC for architectures that may support arm-smccc. It's the responsibility of the caller to know if the SMC instruction is supported by the platform. Reviewed-by: Lars Persson <lars.persson@axis.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Marc Gonzalez | d6de5b0294 |
ARM: tango4: Initial platform support
Support Sigma Designs ARM-based (specifically, Cortex-A9 MPCore r3p0) Tango4 "Secure Media Processor" platforms: smp8756, smp8758, smp8759 (8756 is single-core, the latter are dual-core). Note: 8758 vs 8759: same chip, different package. Support for older MIPS-based platforms can be found elsewhere: https://github.com/mansr/linux-tangox Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> |
|
Stefano Stabellini | 02c2433b3a |
arm: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops
Introduce CONFIG_PARAVIRT and PARAVIRT_TIME_ACCOUNTING on ARM. The only paravirt interface supported is pv_time_ops.steal_clock, so no runtime pvops patching needed. This allows us to make use of steal_account_process_tick for stolen ticks accounting. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Christopher Covington <cov@codeaurora.org> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Russell King <linux@arm.linux.org.uk> |
|
Arnd Bergmann | 11c7a6c5a3 |
Merge branch 'treewide/cleanup' into next/multiplatform
The realview multiplatform series has a trivial conflict with one of the treewide cleanups, let's just merge that in to avoid having to resolve this later. * treewide/cleanup: ARM: use "depends on" for SoC configs instead of "if" after prompt ARM/clocksource: use automatic DT probing for ux500 PRCMU ARM: use const and __initconst for smp_operations ARM: hisi: do not export smp_operations structures Conflicts: arch/arm/mach-integrator/Kconfig |
|
Arnd Bergmann | 86fff036fe |
Multiplatform support for the RealView
- Tested on the ARM PB11MPCore - Tested with boardfile boot - Tested with DeviceTree boot -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWdAsTAAoJEEEQszewGV1zMtsP/1So1gjBSf8NfLbRCndf4l3/ jrviXeGEyGAzvyXvH+KB/24R10NpJMC5zEB8LiUP1Ig/cmNA+XVIJ9IkE8QsjsDx dA3aqYHTsXr8w8l6hzVX95GvAsxvg7hQ73rMsSg1x6r6pNeg859M4ZJis5gfB7Pf w76Qazl4jJUE79t768mxOKf46Af6D3y/Oa8dpsNW7w3ehzeEODI4N5BvUyZ50vKT j8ZdBs++S2ucW1s1zUTeo0wDjaOBK8gNmYKzDtwScCNs5K6l4GcggO0pkrX7MmN/ quNHcvULU0qnzETMjss6wb4xCAenZ98hqHTnBL2NjHd9A1tvTEGBzRfFx4jb5EI6 MspsOfxCLpj59QV7qwQJoYbFdzmQo6YgPn+lZoHA5wzxNqt2g0xiBscPYCVO30WT mYEF27dUDYzq8EH/BkQ/0dsPcWSNZVWpTYj/14+L766maFsPHJYAVnRk1iRNK9Gq uxdu9ZH8VusqFLFkikbNkj9xeFc9M0GN2F5AY0+Li24uzqjClessdXdfiOqQAWZ5 px0ET819Zz+HG0F8+YNKiLL3Ybnhz8EB4NrncXwSJPrvOGt+xATqSUycqrxwwMsu a/kNRaZMRZ7jKdZPPHPESPXdJZKs0vGDThrEFMqKVTFtXfoGNQKdh/Ltixy+rPCH CX8QrAZPi7CqRUEMXmFp =tfk1 -----END PGP SIGNATURE----- Merge tag 'realview-multiplatform-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/multiplatform Pull "Multiplatform support for the RealView" from Linus Walleij: Here is the result of my application of the second part of Arnds patchset, actually enabling multiplatform and getting the RealView off the ground as a multiplatform target. It is dependent on an outstanding patch to the irqchips tree bumping the number of GICs to 2 for the RealView platform. I cannot say I will be sleepless if these go in side by side: each branch will compile but will not boot until both trees have been pulled hurting bisectability a bit. - Tested on the ARM PB11MPCore - Tested with boardfile boot - Tested with DeviceTree boot * tag 'realview-multiplatform-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform |
|
Arnd Bergmann | 2934167dd0 |
ARM: realview: enable multiplatform
All obstacles are out of the way by now, so we can finally move realview to multiplatform. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> [Rebased Kconfig, fixed if $(X) to if X in Makefile] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
Arnd Bergmann | 70722803de |
ARM: make default platform work for NOMMU
Moving ARCH_VERSATILE into ARCH_MULTIPLATFORM means that it no longer works as the default target for MMU-less kernels. While we might want to get that working again in the future, it's also a rather bad default, and it makes sense to make ARM_SINGLE_V7M the default because that is what realistically all NOMMU users on ARM are using, and it actually is what gets selected by default in the absence of versatile in the choice statement. Related to this, 'allnoconfig' kernels fail to link with the new default, as they do not include a machine record: arm-linux-gnueabi-ld: no machine record defined For ARCH_MULTIPLATFORM kernels, we avoid this error by using a default machine descriptor that works for all trivial platforms, like ARCH_VIRT. The same reasoning applies for ARM_SINGLE_V7M, as that can also boot with empty machine descriptors both on qemu and on real hardware, as long as all the drivers are present. We could also follow up with a patch to remove the existing machine descriptors for the ARMv7M platforms, the only callback pointer the four platforms contain today is the armv7m_restart handler and we can simply make that the default for v7M with an add-on patch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
|
Nicolas Pitre | 42f25bddd0 |
ARM: 8477/1: runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()
The ARM compiler inserts calls to __aeabi_idiv() and __aeabi_uidiv() when it needs to perform division on signed and unsigned integers. If a processor has support for the sdiv and udiv instructions, the kernel may overwrite the beginning of those functions with those instructions and a "bx lr" to get better performance. To ensure that those functions are aligned to a 32-bit word for easier patching (which might not always be the case in Thumb mode) and that the two patched instructions end up in the same cache line, a 8-byte alignment is enforced when ARM_PATCH_IDIV is selected. This was heavily inspired by a previous patch from Stephen Boyd. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Arnd Bergmann | 3081dc9eff |
mvebu soc for 4.5 (part 1)
- orion5x/mv78xx0 multiplatform conversion - legacy dove PMU support conversion -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEABECAAYFAlZq1uEACgkQCwYYjhRyO9XZ8ACdHuhMhzgLQ3lR/wUj0Eaj6udh AuMAn2JdAcBRYkI6B0PkPK5igJugASzQ =pkme -----END PGP SIGNATURE----- Merge tag 'mvebu-soc-4.5-1' of git://git.infradead.org/linux-mvebu into next/multiplatform Merge "mvebu soc for 4.5 (part 1)" from Gregory CLEMENT: - orion5x/mv78xx0 multiplatform conversion - legacy dove PMU support conversion * tag 'mvebu-soc-4.5-1' of git://git.infradead.org/linux-mvebu: ARM: dove: convert legacy dove to PMU support soc: dove: add legacy support to PMU driver ARM: orion5x: multiplatform support ARM: orion5x: clean up mach/*.h headers ARM: mv78xx0: multiplatform support ARM: mv78xx0: clean up mach/*.h headers ARM: orion: use SPARSE_IRQ everywhere ARM: orion: always use MULTI_IRQ_HANDLER ARM: orion: move watchdog setup to mach-orion5x Conflicts: arch/arm/Kconfig arch/arm/mach-dove/include/mach/entry-macro.S arch/arm/mach-orion5x/include/mach/entry-macro.S |
|
Arnd Bergmann | 22ba14f41c |
The board and infrastructure changes for RealView
multiplatform and extended DT support. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWb9LqAAoJEEEQszewGV1z1I4QAIgylTG1hftD5xCtaKsgJv5X pcp+eVVCeYjeO3AbknrXzBlty0u3/rDOR6n9aUn7ci63qErGi2GeoZ5glo6y3aOU qKo2/M0LOoP3y6SGxMjaPTTpStjKsaj2XLjHLNrSHAKXsvoFB69vnAlQh2jU+ohX JEl9wvkugMWicGaiooWQfG7OAf2Gb6AFAKQUfYNVNNXBTD13oQcFRgLwBKDkNlc9 7N6yzPQDNQiauytr7Ji/49fbkiOLFSB5yllhecb37F/b56XprGvsXJTRwsQhPwbj ig28qu/g7LhfnkZUOTwhWH6WdyFarMlpA8oHHKrZBeGySgvdjXBVYH4IQAfhT2N9 WSh/he+w8T2+oMVj97gLSxKiP4ugUSsBR6daq5X8NESobxFVYzmFIYQxKxOwFif4 JDWvOKaQsRhx42iAq3CIMkh7yQsBC4tJjtyvVwHuGeC2zRlyODbBCnN4OGKDdYpJ +VY4kr48Yld5IxYm6J6fXOEWTcFw2n/hvEVsik5mmgw1rYivJsCcvcVxv04xZYCl 6d13eCaSh2TfeKYs/Qf2yy3hmps4dWFcd18/xWRyFdnkCs5qGRbtgLiAQtUnQAGm bpaI/rYeRnnF80af2dhpZT2i0zBL9uuur7FYZDB9xsQDOkqnCYxKvSW1CfNg5Gtc senI3dczeTC3NtwRp4eC =Zhx3 -----END PGP SIGNATURE----- Merge tag 'realview-base-armsoc-1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/multiplatform Merge "Realview multiplatform support" from Linus Walleij: The board and infrastructure changes for RealView multiplatform and extended DT support. * tag 'realview-base-armsoc-1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: realview: add an DT SMP boot method ARM: realview: select SP810 and ICST for the DT variant soc: versatile: add support for the PB11MPCore clk: versatile-icst: add device tree support clk: versatile-icst: refactor to allocate regmap separately clk: versatile-icst: convert to use regmap ARM: realview: remove private barrier implementation ARM: no longer force unbuffered DMA for realview clk/realview: stop using machine headers ARM: realview: don't map undefined PCI registers ARM: realview: remove sparsemem hack Conflicts: drivers/clk/versatile/Kconfig |