mirror of https://gitee.com/openkylin/linux.git
37 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Martin KaFai Lau
|
27ae7997a6 |
bpf: Introduce BPF_PROG_TYPE_STRUCT_OPS
This patch allows the kernel's struct ops (i.e. func ptr) to be implemented in BPF. The first use case in this series is the "struct tcp_congestion_ops" which will be introduced in a latter patch. This patch introduces a new prog type BPF_PROG_TYPE_STRUCT_OPS. The BPF_PROG_TYPE_STRUCT_OPS prog is verified against a particular func ptr of a kernel struct. The attr->attach_btf_id is the btf id of a kernel struct. The attr->expected_attach_type is the member "index" of that kernel struct. The first member of a struct starts with member index 0. That will avoid ambiguity when a kernel struct has multiple func ptrs with the same func signature. For example, a BPF_PROG_TYPE_STRUCT_OPS prog is written to implement the "init" func ptr of the "struct tcp_congestion_ops". The attr->attach_btf_id is the btf id of the "struct tcp_congestion_ops" of the _running_ kernel. The attr->expected_attach_type is 3. The ctx of BPF_PROG_TYPE_STRUCT_OPS is an array of u64 args saved by arch_prepare_bpf_trampoline that will be done in the next patch when introducing BPF_MAP_TYPE_STRUCT_OPS. "struct bpf_struct_ops" is introduced as a common interface for the kernel struct that supports BPF_PROG_TYPE_STRUCT_OPS prog. The supporting kernel struct will need to implement an instance of the "struct bpf_struct_ops". The supporting kernel struct also needs to implement a bpf_verifier_ops. During BPF_PROG_LOAD, bpf_struct_ops_find() will find the right bpf_verifier_ops by searching the attr->attach_btf_id. A new "btf_struct_access" is also added to the bpf_verifier_ops such that the supporting kernel struct can optionally provide its own specific check on accessing the func arg (e.g. provide limited write access). After btf_vmlinux is parsed, the new bpf_struct_ops_init() is called to initialize some values (e.g. the btf id of the supporting kernel struct) and it can only be done once the btf_vmlinux is available. The R0 checks at BPF_EXIT is excluded for the BPF_PROG_TYPE_STRUCT_OPS prog if the return type of the prog->aux->attach_func_proto is "void". Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200109003503.3855825-1-kafai@fb.com |
|
|
Björn Töpel
|
75ccbef636 |
bpf: Introduce BPF dispatcher
The BPF dispatcher is a multi-way branch code generator, mainly targeted for XDP programs. When an XDP program is executed via the bpf_prog_run_xdp(), it is invoked via an indirect call. The indirect call has a substantial performance impact, when retpolines are enabled. The dispatcher transform indirect calls to direct calls, and therefore avoids the retpoline. The dispatcher is generated using the BPF JIT, and relies on text poking provided by bpf_arch_text_poke(). The dispatcher hijacks a trampoline function it via the __fentry__ nop of the trampoline. One dispatcher instance currently supports up to 64 dispatch points. A user creates a dispatcher with its corresponding trampoline with the DEFINE_BPF_DISPATCHER macro. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191213175112.30208-3-bjorn.topel@gmail.com |
|
|
Alexei Starovoitov
|
fec56f5890 |
bpf: Introduce BPF trampoline
Introduce BPF trampoline concept to allow kernel code to call into BPF programs with practically zero overhead. The trampoline generation logic is architecture dependent. It's converting native calling convention into BPF calling convention. BPF ISA is 64-bit (even on 32-bit architectures). The registers R1 to R5 are used to pass arguments into BPF functions. The main BPF program accepts only single argument "ctx" in R1. Whereas CPU native calling convention is different. x86-64 is passing first 6 arguments in registers and the rest on the stack. x86-32 is passing first 3 arguments in registers. sparc64 is passing first 6 in registers. And so on. The trampolines between BPF and kernel already exist. BPF_CALL_x macros in include/linux/filter.h statically compile trampolines from BPF into kernel helpers. They convert up to five u64 arguments into kernel C pointers and integers. On 64-bit architectures this BPF_to_kernel trampolines are nops. On 32-bit architecture they're meaningful. The opposite job kernel_to_BPF trampolines is done by CAST_TO_U64 macros and __bpf_trace_##call() shim functions in include/trace/bpf_probe.h. They convert kernel function arguments into array of u64s that BPF program consumes via R1=ctx pointer. This patch set is doing the same job as __bpf_trace_##call() static trampolines, but dynamically for any kernel function. There are ~22k global kernel functions that are attachable via nop at function entry. The function arguments and types are described in BTF. The job of btf_distill_func_proto() function is to extract useful information from BTF into "function model" that architecture dependent trampoline generators will use to generate assembly code to cast kernel function arguments into array of u64s. For example the kernel function eth_type_trans has two pointers. They will be casted to u64 and stored into stack of generated trampoline. The pointer to that stack space will be passed into BPF program in R1. On x86-64 such generated trampoline will consume 16 bytes of stack and two stores of %rdi and %rsi into stack. The verifier will make sure that only two u64 are accessed read-only by BPF program. The verifier will also recognize the precise type of the pointers being accessed and will not allow typecasting of the pointer to a different type within BPF program. The tracing use case in the datacenter demonstrated that certain key kernel functions have (like tcp_retransmit_skb) have 2 or more kprobes that are always active. Other functions have both kprobe and kretprobe. So it is essential to keep both kernel code and BPF programs executing at maximum speed. Hence generated BPF trampoline is re-generated every time new program is attached or detached to maintain maximum performance. To avoid the high cost of retpoline the attached BPF programs are called directly. __bpf_prog_enter/exit() are used to support per-program execution stats. In the future this logic will be optimized further by adding support for bpf_stats_enabled_key inside generated assembly code. Introduction of preemptible and sleepable BPF programs will completely remove the need to call to __bpf_prog_enter/exit(). Detach of a BPF program from the trampoline should not fail. To avoid memory allocation in detach path the half of the page is used as a reserve and flipped after each attach/detach. 2k bytes is enough to call 40+ BPF programs directly which is enough for BPF tracing use cases. This limit can be increased in the future. BPF_TRACE_FENTRY programs have access to raw kernel function arguments while BPF_TRACE_FEXIT programs have access to kernel return value as well. Often kprobe BPF program remembers function arguments in a map while kretprobe fetches arguments from a map and analyzes them together with return value. BPF_TRACE_FEXIT accelerates this typical use case. Recursion prevention for kprobe BPF programs is done via per-cpu bpf_prog_active counter. In practice that turned out to be a mistake. It caused programs to randomly skip execution. The tracing tools missed results they were looking for. Hence BPF trampoline doesn't provide builtin recursion prevention. It's a job of BPF program itself and will be addressed in the follow up patches. BPF trampoline is intended to be used beyond tracing and fentry/fexit use cases in the future. For example to remove retpoline cost from XDP programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191114185720.1641606-5-ast@kernel.org |
|
|
Andrii Nakryiko
|
341dfcf8d7 |
btf: expose BTF info through sysfs
Make .BTF section allocated and expose its contents through sysfs.
/sys/kernel/btf directory is created to contain all the BTFs present
inside kernel. Currently there is only kernel's main BTF, represented as
/sys/kernel/btf/kernel file. Once kernel modules' BTFs are supported,
each module will expose its BTF as /sys/kernel/btf/<module-name> file.
Current approach relies on a few pieces coming together:
1. pahole is used to take almost final vmlinux image (modulo .BTF and
kallsyms) and generate .BTF section by converting DWARF info into
BTF. This section is not allocated and not mapped to any segment,
though, so is not yet accessible from inside kernel at runtime.
2. objcopy dumps .BTF contents into binary file and subsequently
convert binary file into linkable object file with automatically
generated symbols _binary__btf_kernel_bin_start and
_binary__btf_kernel_bin_end, pointing to start and end, respectively,
of BTF raw data.
3. final vmlinux image is generated by linking this object file (and
kallsyms, if necessary). sysfs_btf.c then creates
/sys/kernel/btf/kernel file and exposes embedded BTF contents through
it. This allows, e.g., libbpf and bpftool access BTF info at
well-known location, without resorting to searching for vmlinux image
on disk (location of which is not standardized and vmlinux image
might not be even available in some scenarios, e.g., inside qemu
during testing).
Alternative approach using .incbin assembler directive to embed BTF
contents directly was attempted but didn't work, because sysfs_proc.o is
not re-compiled during link-vmlinux.sh stage. This is required, though,
to update embedded BTF data (initially empty data is embedded, then
pahole generates BTF info and we need to regenerate sysfs_btf.o with
updated contents, but it's too late at that point).
If BTF couldn't be generated due to missing or too old pahole,
sysfs_btf.c handles that gracefully by detecting that
_binary__btf_kernel_bin_start (weak symbol) is 0 and not creating
/sys/kernel/btf at all.
v2->v3:
- added Documentation/ABI/testing/sysfs-kernel-btf (Greg K-H);
- created proper kobject (btf_kobj) for btf directory (Greg K-H);
- undo v2 change of reusing vmlinux, as it causes extra kallsyms pass
due to initially missing __binary__btf_kernel_bin_{start/end} symbols;
v1->v2:
- allow kallsyms stage to re-use vmlinux generated by gen_btf();
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
|
Valdis Klētnieks
|
aee450cbe4 |
bpf: silence warning messages in core
Compiling kernel/bpf/core.c with W=1 causes a flood of warnings:
kernel/bpf/core.c:1198:65: warning: initialized field overwritten [-Woverride-init]
1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
| ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
1087 | INSN_3(ALU, ADD, X), \
| ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
1202 | BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
| ^~~~~~~~~~~~
kernel/bpf/core.c:1198:65: note: (near initialization for 'public_insntable[12]')
1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
| ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
1087 | INSN_3(ALU, ADD, X), \
| ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
1202 | BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
| ^~~~~~~~~~~~
98 copies of the above.
The attached patch silences the warnings, because we *know* we're overwriting
the default initializer. That leaves bpf/core.c with only 6 other warnings,
which become more visible in comparison.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
|
Mauricio Vasquez B
|
f1a2e44a3a |
bpf: add queue and stack maps
Queue/stack maps implement a FIFO/LIFO data storage for ebpf programs. These maps support peek, pop and push operations that are exposed to eBPF programs through the new bpf_map[peek/pop/push] helpers. Those operations are exposed to userspace applications through the already existing syscalls in the following way: BPF_MAP_LOOKUP_ELEM -> peek BPF_MAP_LOOKUP_AND_DELETE_ELEM -> pop BPF_MAP_UPDATE_ELEM -> push Queue/stack maps are implemented using a buffer, tail and head indexes, hence BPF_F_NO_PREALLOC is not supported. As opposite to other maps, queue and stack do not use RCU for protecting maps values, the bpf_map[peek/pop] have a ARG_PTR_TO_UNINIT_MAP_VALUE argument that is a pointer to a memory zone where to save the value of a map. Basically the same as ARG_PTR_TO_UNINIT_MEM, but the size has not be passed as an extra argument. Our main motivation for implementing queue/stack maps was to keep track of a pool of elements, like network ports in a SNAT, however we forsee other use cases, like for exampling saving last N kernel events in a map and then analysing from userspace. Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
|
|
Daniel Borkmann
|
604326b41a |
bpf, sockmap: convert to generic sk_msg interface
Add a generic sk_msg layer, and convert current sockmap and later kTLS over to make use of it. While sk_buff handles network packet representation from netdevice up to socket, sk_msg handles data representation from application to socket layer. This means that sk_msg framework spans across ULP users in the kernel, and enables features such as introspection or filtering of data with the help of BPF programs that operate on this data structure. Latter becomes in particular useful for kTLS where data encryption is deferred into the kernel, and as such enabling the kernel to perform L7 introspection and policy based on BPF for TLS connections where the record is being encrypted after BPF has run and came to a verdict. In order to get there, first step is to transform open coding of scatter-gather list handling into a common core framework that subsystems can use. The code itself has been split and refactored into three bigger pieces: i) the generic sk_msg API which deals with managing the scatter gather ring, providing helpers for walking and mangling, transferring application data from user space into it, and preparing it for BPF pre/post-processing, ii) the plain sock map itself where sockets can be attached to or detached from; these bits are independent of i) which can now be used also without sock map, and iii) the integration with plain TCP as one protocol to be used for processing L7 application data (later this could e.g. also be extended to other protocols like UDP). The semantics are the same with the old sock map code and therefore no change of user facing behavior or APIs. While pursuing this work it also helped finding a number of bugs in the old sockmap code that we've fixed already in earlier commits. The test_sockmap kselftest suite passes through fine as well. Joint work with John. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
|
|
Martin KaFai Lau
|
5dc4c4b7d4 |
bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY
This patch introduces a new map type BPF_MAP_TYPE_REUSEPORT_SOCKARRAY. To unleash the full potential of a bpf prog, it is essential for the userspace to be capable of directly setting up a bpf map which can then be consumed by the bpf prog to make decision. In this case, decide which SO_REUSEPORT sk to serve the incoming request. By adding BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, the userspace has total control and visibility on where a SO_REUSEPORT sk should be located in a bpf map. The later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT such that the bpf prog can directly select a sk from the bpf map. That will raise the programmability of the bpf prog attached to a reuseport group (a group of sk serving the same IP:PORT). For example, in UDP, the bpf prog can peek into the payload (e.g. through the "data" pointer introduced in the later patch) to learn the application level's connection information and then decide which sk to pick from a bpf map. The userspace can tightly couple the sk's location in a bpf map with the application logic in generating the UDP payload's connection information. This connection info contact/API stays within the userspace. Also, when used with map-in-map, the userspace can switch the old-server-process's inner map to a new-server-process's inner map in one call "bpf_map_update_elem(outer_map, &index, &new_reuseport_array)". The bpf prog will then direct incoming requests to the new process instead of the old process. The old process can finish draining the pending requests (e.g. by "accept()") before closing the old-fds. [Note that deleting a fd from a bpf map does not necessary mean the fd is closed] During map_update_elem(), Only SO_REUSEPORT sk (i.e. which has already been added to a reuse->socks[]) can be used. That means a SO_REUSEPORT sk that is "bind()" for UDP or "bind()+listen()" for TCP. These conditions are ensured in "reuseport_array_update_check()". A SO_REUSEPORT sk can only be added once to a map (i.e. the same sk cannot be added twice even to the same map). SO_REUSEPORT already allows another sk to be created for the same IP:PORT. There is no need to re-create a similar usage in the BPF side. When a SO_REUSEPORT is deleted from the "reuse->socks[]" (e.g. "close()"), it will notify the bpf map to remove it from the map also. It is done through "bpf_sk_reuseport_detach()" and it will only be called if >=1 of the "reuse->sock[]" has ever been added to a bpf map. The map_update()/map_delete() has to be in-sync with the "reuse->socks[]". Hence, the same "reuseport_lock" used by "reuse->socks[]" has to be used here also. Care has been taken to ensure the lock is only acquired when the adding sk passes some strict tests. and freeing the map does not require the reuseport_lock. The reuseport_array will also support lookup from the syscall side. It will return a sock_gen_cookie(). The sock_gen_cookie() is on-demand (i.e. a sk's cookie is not generated until the very first map_lookup_elem()). The lookup cookie is 64bits but it goes against the logical userspace expectation on 32bits sizeof(fd) (and as other fd based bpf maps do also). It may catch user in surprise if we enforce value_size=8 while userspace still pass a 32bits fd during update. Supporting different value_size between lookup and update seems unintuitive also. We also need to consider what if other existing fd based maps want to return 64bits value from syscall's lookup in the future. Hence, reuseport_array supports both value_size 4 and 8, and assuming user will usually use value_size=4. The syscall's lookup will return ENOSPC on value_size=4. It will will only return 64bits value from sock_gen_cookie() when user consciously choose value_size=8 (as a signal that lookup is desired) which then requires a 64bits value in both lookup and update. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
|
|
Roman Gushchin
|
de9cbbaadb |
bpf: introduce cgroup storage maps
This commit introduces BPF_MAP_TYPE_CGROUP_STORAGE maps: a special type of maps which are implementing the cgroup storage. >From the userspace point of view it's almost a generic hash map with the (cgroup inode id, attachment type) pair used as a key. The only difference is that some operations are restricted: 1) a user can't create new entries, 2) a user can't remove existing entries. The lookup from userspace is o(log(n)). Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
|
|
Björn Töpel
|
fbfc504a24 |
bpf: introduce new bpf AF_XDP map type BPF_MAP_TYPE_XSKMAP
The xskmap is yet another BPF map, very much inspired by dev/cpu/sockmap, and is a holder of AF_XDP sockets. A user application adds AF_XDP sockets into the map, and by using the bpf_redirect_map helper, an XDP program can redirect XDP frames to an AF_XDP socket. Note that a socket that is bound to certain ifindex/queue index will *only* accept XDP frames from that netdev/queue index. If an XDP program tries to redirect from a netdev/queue index other than what the socket is bound to, the frame will not be received on the socket. A socket can reside in multiple maps. v3: Fixed race and simplified code. v2: Removed one indirection in map lookup. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
|
|
Martin KaFai Lau
|
69b693f0ae |
bpf: btf: Introduce BPF Type Format (BTF)
This patch introduces BPF type Format (BTF). BTF (BPF Type Format) is the meta data format which describes the data types of BPF program/map. Hence, it basically focus on the C programming language which the modern BPF is primary using. The first use case is to provide a generic pretty print capability for a BPF map. BTF has its root from CTF (Compact C-Type format). To simplify the handling of BTF data, BTF removes the differences between small and big type/struct-member. Hence, BTF consistently uses u32 instead of supporting both "one u16" and "two u32 (+padding)" in describing type and struct-member. It also raises the number of types (and functions) limit from 0x7fff to 0x7fffffff. Due to the above changes, the format is not compatible to CTF. Hence, BTF starts with a new BTF_MAGIC and version number. This patch does the first verification pass to the BTF. The first pass checks: 1. meta-data size (e.g. It does not go beyond the total btf's size) 2. name_offset is valid 3. Each BTF_KIND (e.g. int, enum, struct....) does its own check of its meta-data. Some other checks, like checking a struct's member is referring to a valid type, can only be done in the second pass. The second verification pass will be implemented in the next patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
|
|
John Fastabend
|
5f103c5d4d |
bpf: only build sockmap with CONFIG_INET
The sockmap infrastructure is only aware of TCP sockets at the moment. In the future we plan to add UDP. In both cases CONFIG_NET should be built-in. So lets only build sockmap if CONFIG_INET is enabled. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
|
|
Jakub Kicinski
|
ab3f0063c4 |
bpf: offload: add infrastructure for loading programs for a specific netdev
The fact that we don't know which device the program is going to be used on is quite limiting in current eBPF infrastructure. We have to reverse or limit the changes which kernel makes to the loaded bytecode if we want it to be offloaded to a networking device. We also have to invent new APIs for debugging and troubleshooting support. Make it possible to load programs for a specific netdev. This helps us to bring the debug information closer to the core eBPF infrastructure (e.g. we will be able to reuse the verifer log in device JIT). It allows device JITs to perform translation on the original bytecode. __bpf_prog_get() when called to get a reference for an attachment point will now refuse to give it if program has a device assigned. Following patches will add a version of that function which passes the expected netdev in. @type argument in __bpf_prog_get() is renamed to attach_type to make it clearer that it's only set on attachment. All calls to ndo_bpf are protected by rtnl, only verifier callbacks are not. We need a wait queue to make sure netdev doesn't get destroyed while verifier is still running and calling its driver. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
David S. Miller
|
2a171788ba |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Jesper Dangaard Brouer
|
6710e11269 |
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP
The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Jakub Kicinski
|
f4ac7e0b5c |
bpf: move instruction printing into a separate file
Separate the instruction printing into a standalone source file. This way sneaky code from tools/ can compile it in directly. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
John Fastabend
|
6bdc9c4c31 |
bpf: sock_map fixes for !CONFIG_BPF_SYSCALL and !STREAM_PARSER
Resolve issues with !CONFIG_BPF_SYSCALL and !STREAM_PARSER
net/core/filter.c: In function ‘do_sk_redirect_map’:
net/core/filter.c:1881:3: error: implicit declaration of function ‘__sock_map_lookup_elem’ [-Werror=implicit-function-declaration]
sk = __sock_map_lookup_elem(ri->map, ri->ifindex);
^
net/core/filter.c:1881:6: warning: assignment makes pointer from integer without a cast [enabled by default]
sk = __sock_map_lookup_elem(ri->map, ri->ifindex);
Fixes:
|
|
|
John Fastabend
|
174a79ff95 |
bpf: sockmap with sk redirect support
Recently we added a new map type called dev map used to forward XDP
packets between ports (
|
|
|
Edward Cree
|
f1174f77b5 |
bpf/verifier: rework value tracking
Unifies adjusted and unadjusted register value types (e.g. FRAME_POINTER is now just a PTR_TO_STACK with zero offset). Tracks value alignment by means of tracking known & unknown bits. This also replaces the 'reg->imm' (leading zero bits) calculations for (what were) UNKNOWN_VALUEs. If pointer leaks are allowed, and adjust_ptr_min_max_vals returns -EACCES, treat the pointer as an unknown scalar and try again, because we might be able to conclude something about the result (e.g. pointer & 0x40 is either 0 or 0x40). Verifier hooks in the netronome/nfp driver were changed to match the new data structures. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
John Fastabend
|
546ac1ffb7 |
bpf: add devmap, a map for storing net device references
Device map (devmap) is a BPF map, primarily useful for networking applications, that uses a key to lookup a reference to a netdevice. The map provides a clean way for BPF programs to build virtual port to physical port maps. Additionally, it provides a scoping function for the redirect action itself allowing multiple optimizations. Future patches will leverage the map to provide batching at the XDP layer. Another optimization/feature, that is not yet implemented, would be to support multiple netdevices per key to support efficient multicast and broadcast support. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Martin KaFai Lau
|
56f668dfe0 |
bpf: Add array of maps support
This patch adds a few helper funcs to enable map-in-map support (i.e. outer_map->inner_map). The first outer_map type BPF_MAP_TYPE_ARRAY_OF_MAPS is also added in this patch. The next patch will introduce a hash of maps type. Any bpf map type can be acted as an inner_map. The exception is BPF_MAP_TYPE_PROG_ARRAY because the extra level of indirection makes it harder to verify the owner_prog_type and owner_jited. Multi-level map-in-map is not supported (i.e. map->map is ok but not map->map->map). When adding an inner_map to an outer_map, it currently checks the map_type, key_size, value_size, map_flags, max_entries and ops. The verifier also uses those map's properties to do static analysis. map_flags is needed because we need to ensure BPF_PROG_TYPE_PERF_EVENT is using a preallocated hashtab for the inner_hash also. ops and max_entries are needed to generate inlined map-lookup instructions. For simplicity reason, a simple '==' test is used for both map_flags and max_entries. The equality of ops is implied by the equality of map_type. During outer_map creation time, an inner_map_fd is needed to create an outer_map. However, the inner_map_fd's life time does not depend on the outer_map. The inner_map_fd is merely used to initialize the inner_map_meta of the outer_map. Also, for the outer_map: * It allows element update and delete from syscall * It allows element lookup from bpf_prog The above is similar to the current fd_array pattern. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Daniel Mack
|
b95a5c4db0 |
bpf: add a longest prefix match trie map implementation
This trie implements a longest prefix match algorithm that can be used to match IP addresses to a stored set of ranges. Internally, data is stored in an unbalanced trie of nodes that has a maximum height of n, where n is the prefixlen the trie was created with. Tries may be created with prefix lengths that are multiples of 8, in the range from 8 to 2048. The key used for lookup and update operations is a struct bpf_lpm_trie_key, and the value is a uint64_t. The code carries more information about the internal implementation. Signed-off-by: Daniel Mack <daniel@zonque.org> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Daniel Mack
|
3007098494 |
cgroup: add support for eBPF programs
This patch adds two sets of eBPF program pointers to struct cgroup.
One for such that are directly pinned to a cgroup, and one for such
that are effective for it.
To illustrate the logic behind that, assume the following example
cgroup hierarchy.
A - B - C
\ D - E
If only B has a program attached, it will be effective for B, C, D
and E. If D then attaches a program itself, that will be effective for
both D and E, and the program in B will only affect B and C. Only one
program of a given type is effective for a cgroup.
Attaching and detaching programs will be done through the bpf(2)
syscall. For now, ingress and egress inet socket filtering are the
only supported use-cases.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
Martin KaFai Lau
|
3a08c2fd76 |
bpf: LRU List
Introduce bpf_lru_list which will provide LRU capability to the bpf_htab in the later patch. * General Thoughts: 1. Target use case. Read is more often than update. (i.e. bpf_lookup_elem() is more often than bpf_update_elem()). If bpf_prog does a bpf_lookup_elem() first and then an in-place update, it still counts as a read operation to the LRU list concern. 2. It may be useful to think of it as a LRU cache 3. Optimize the read case 3.1 No lock in read case 3.2 The LRU maintenance is only done during bpf_update_elem() 4. If there is a percpu LRU list, it will lose the system-wise LRU property. A completely isolated percpu LRU list has the best performance but the memory utilization is not ideal considering the work load may be imbalance. 5. Hence, this patch starts the LRU implementation with a global LRU list with batched operations before accessing the global LRU list. As a LRU cache, #read >> #update/#insert operations, it will work well. 6. There is a local list (for each cpu) which is named 'struct bpf_lru_locallist'. This local list is not used to sort the LRU property. Instead, the local list is to batch enough operations before acquiring the lock of the global LRU list. More details on this later. 7. In the later patch, it allows a percpu LRU list by specifying a map-attribute for scalability reason and for use cases that need to prepare for the worst (and pathological) case like DoS attack. The percpu LRU list is completely isolated from each other and the LRU nodes (including free nodes) cannot be moved across the list. The following description is for the global LRU list but mostly applicable to the percpu LRU list also. * Global LRU List: 1. It has three sub-lists: active-list, inactive-list and free-list. 2. The two list idea, active and inactive, is borrowed from the page cache. 3. All nodes are pre-allocated and all sit at the free-list (of the global LRU list) at the beginning. The pre-allocation reasoning is similar to the existing BPF_MAP_TYPE_HASH. However, opting-out prealloc (BPF_F_NO_PREALLOC) is not supported in the LRU map. * Active/Inactive List (of the global LRU list): 1. The active list, as its name says it, maintains the active set of the nodes. We can think of it as the working set or more frequently accessed nodes. The access frequency is approximated by a ref-bit. The ref-bit is set during the bpf_lookup_elem(). 2. The inactive list, as its name also says it, maintains a less active set of nodes. They are the candidates to be removed from the bpf_htab when we are running out of free nodes. 3. The ordering of these two lists is acting as a rough clock. The tail of the inactive list is the older nodes and should be released first if the bpf_htab needs free element. * Rotating the Active/Inactive List (of the global LRU list): 1. It is the basic operation to maintain the LRU property of the global list. 2. The active list is only rotated when the inactive list is running low. This idea is similar to the current page cache. Inactive running low is currently defined as "# of inactive < # of active". 3. The active list rotation always starts from the tail. It moves node without ref-bit set to the head of the inactive list. It moves node with ref-bit set back to the head of the active list and then clears its ref-bit. 4. The inactive rotation is pretty simply. It walks the inactive list and moves the nodes back to the head of active list if its ref-bit is set. The ref-bit is cleared after moving to the active list. If the node does not have ref-bit set, it just leave it as it is because it is already in the inactive list. * Shrinking the Inactive List (of the global LRU list): 1. Shrinking is the operation to get free nodes when the bpf_htab is full. 2. It usually only shrinks the inactive list to get free nodes. 3. During shrinking, it will walk the inactive list from the tail, delete the nodes without ref-bit set from bpf_htab. 4. If no free node found after step (3), it will forcefully get one node from the tail of inactive or active list. Forcefully is in the sense that it ignores the ref-bit. * Local List: 1. Each CPU has a 'struct bpf_lru_locallist'. The purpose is to batch enough operations before acquiring the lock of the global LRU. 2. A local list has two sub-lists, free-list and pending-list. 3. During bpf_update_elem(), it will try to get from the free-list of (the current CPU local list). 4. If the local free-list is empty, it will acquire from the global LRU list. The global LRU list can either satisfy it by its global free-list or by shrinking the global inactive list. Since we have acquired the global LRU list lock, it will try to get at most LOCAL_FREE_TARGET elements to the local free list. 5. When a new element is added to the bpf_htab, it will first sit at the pending-list (of the local list) first. The pending-list will be flushed to the global LRU list when it needs to acquire free nodes from the global list next time. * Lock Consideration: The LRU list has a lock (lru_lock). Each bucket of htab has a lock (buck_lock). If both locks need to be acquired together, the lock order is always lru_lock -> buck_lock and this only happens in the bpf_lru_list.c logic. In hashtab.c, both locks are not acquired together (i.e. one lock is always released first before acquiring another lock). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Alexei Starovoitov
|
e19494edab |
bpf: introduce percpu_freelist
Introduce simple percpu_freelist to keep single list of elements spread across per-cpu singly linked lists. /* push element into the list */ void pcpu_freelist_push(struct pcpu_freelist *, struct pcpu_freelist_node *); /* pop element from the list */ struct pcpu_freelist_node *pcpu_freelist_pop(struct pcpu_freelist *); The object is pushed to the current cpu list. Pop first trying to get the object from the current cpu list, if it's empty goes to the neigbour cpu list. For bpf program usage pattern the collision rate is very low, since programs push and pop the objects typically on the same cpu. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Alexei Starovoitov
|
d5a3b1f691 |
bpf: introduce BPF_MAP_TYPE_STACK_TRACE
add new map type to store stack traces and corresponding helper
bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id
@ctx: struct pt_regs*
@map: pointer to stack_trace map
@flags: bits 0-7 - numer of stack frames to skip
bit 8 - collect user stack instead of kernel
bit 9 - compare stacks by hash only
bit 10 - if two different stacks hash into the same stackid
discard old
other bits - reserved
Return: >= 0 stackid on success or negative error
stackid is a 32-bit integer handle that can be further combined with
other data (including other stackid) and used as a key into maps.
Userspace will access stackmap using standard lookup/delete syscall commands to
retrieve full stack trace for given stackid.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
Daniel Borkmann
|
b2197755b2 |
bpf: add support for persistent maps/progs
This work adds support for "persistent" eBPF maps/programs. The term "persistent" is to be understood that maps/programs have a facility that lets them survive process termination. This is desired by various eBPF subsystem users. Just to name one example: tc classifier/action. Whenever tc parses the ELF object, extracts and loads maps/progs into the kernel, these file descriptors will be out of reach after the tc instance exits. So a subsequent tc invocation won't be able to access/relocate on this resource, and therefore maps cannot easily be shared, f.e. between the ingress and egress networking data path. The current workaround is that Unix domain sockets (UDS) need to be instrumented in order to pass the created eBPF map/program file descriptors to a third party management daemon through UDS' socket passing facility. This makes it a bit complicated to deploy shared eBPF maps or programs (programs f.e. for tail calls) among various processes. We've been brainstorming on how we could tackle this issue and various approches have been tried out so far, which can be read up further in the below reference. The architecture we eventually ended up with is a minimal file system that can hold map/prog objects. The file system is a per mount namespace singleton, and the default mount point is /sys/fs/bpf/. Any subsequent mounts within a given namespace will point to the same instance. The file system allows for creating a user-defined directory structure. The objects for maps/progs are created/fetched through bpf(2) with two new commands (BPF_OBJ_PIN/BPF_OBJ_GET). I.e. a bpf file descriptor along with a pathname is being passed to bpf(2) that in turn creates (we call it eBPF object pinning) the file system nodes. Only the pathname is being passed to bpf(2) for getting a new BPF file descriptor to an existing node. The user can use that to access maps and progs later on, through bpf(2). Removal of file system nodes is being managed through normal VFS functions such as unlink(2), etc. The file system code is kept to a very minimum and can be further extended later on. The next step I'm working on is to add dump eBPF map/prog commands to bpf(2), so that a specification from a given file descriptor can be retrieved. This can be used by things like CRIU but also applications can inspect the meta data after calling BPF_OBJ_GET. Big thanks also to Alexei and Hannes who significantly contributed in the design discussion that eventually let us end up with this architecture here. Reference: https://lkml.org/lkml/2015/10/15/925 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Daniel Borkmann
|
f91fe17e24 |
ebpf: remove kernel test stubs
Now that we have BPF_PROG_TYPE_SOCKET_FILTER up and running, we can remove the test stubs which were added to get the verifier suite up. We can just let the test cases probe under socket filter type instead. In the fill/spill test case, we cannot (yet) access fields from the context (skb), but we may adapt that test case in future. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Alexei Starovoitov
|
d0003ec01c |
bpf: allow eBPF programs to use maps
expose bpf_map_lookup_elem(), bpf_map_update_elem(), bpf_map_delete_elem() map accessors to eBPF programs Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Alexei Starovoitov
|
28fbcfa08d |
bpf: add array type of eBPF maps
add new map type BPF_MAP_TYPE_ARRAY and its implementation
- optimized for fastest possible lookup()
. in the future verifier/JIT may recognize lookup() with constant key
and optimize it into constant pointer. Can optimize non-constant
key into direct pointer arithmetic as well, since pointers and
value_size are constant for the life of the eBPF program.
In other words array_map_lookup_elem() may be 'inlined' by verifier/JIT
while preserving concurrent access to this map from user space
- two main use cases for array type:
. 'global' eBPF variables: array of 1 element with key=0 and value is a
collection of 'global' variables which programs can use to keep the state
between events
. aggregation of tracing events into fixed set of buckets
- all array elements pre-allocated and zero initialized at init time
- key as an index in array and can only be 4 byte
- map_delete_elem() returns EINVAL, since elements cannot be deleted
- map_update_elem() replaces elements in an non-atomic way
(for atomic updates hashtable type should be used instead)
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
Alexei Starovoitov
|
0f8e4bd8a1 |
bpf: add hashtable type of eBPF maps
add new map type BPF_MAP_TYPE_HASH and its implementation
- maps are created/destroyed by userspace. Both userspace and eBPF programs
can lookup/update/delete elements from the map
- eBPF programs can be called in_irq(), so use spin_lock_irqsave() mechanism
for concurrent updates
- key/value are opaque range of bytes (aligned to 8 bytes)
- user space provides 3 configuration attributes via BPF syscall:
key_size, value_size, max_entries
- map takes care of allocating/freeing key/value pairs
- map_update_elem() must fail to insert new element when max_entries
limit is reached to make sure that eBPF programs cannot exhaust memory
- map_update_elem() replaces elements in an atomic way
- optimized for speed of lookup() which can be called multiple times from
eBPF program which itself is triggered by high volume of events
. in the future JIT compiler may recognize lookup() call and optimize it
further, since key_size is constant for life of eBPF program
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
Alexei Starovoitov
|
f89b7755f5 |
bpf: split eBPF out of NET
introduce two configs: - hidden CONFIG_BPF to select eBPF interpreter that classic socket filters depend on - visible CONFIG_BPF_SYSCALL (default off) that tracing and sockets can use that solves several problems: - tracing and others that wish to use eBPF don't need to depend on NET. They can use BPF_SYSCALL to allow loading from userspace or select BPF to use it directly from kernel in NET-less configs. - in 3.18 programs cannot be attached to events yet, so don't force it on - when the rest of eBPF infra is there in 3.19+, it's still useful to switch it off to minimize kernel size bloat-o-meter on x64 shows: add/remove: 0/60 grow/shrink: 0/2 up/down: 0/-15601 (-15601) tested with many different config combinations. Hopefully didn't miss anything. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Alexei Starovoitov
|
3c731eba48 |
bpf: mini eBPF library, test stubs and verifier testsuite
1. the library includes a trivial set of BPF syscall wrappers: int bpf_create_map(int key_size, int value_size, int max_entries); int bpf_update_elem(int fd, void *key, void *value); int bpf_lookup_elem(int fd, void *key, void *value); int bpf_delete_elem(int fd, void *key); int bpf_get_next_key(int fd, void *key, void *next_key); int bpf_prog_load(enum bpf_prog_type prog_type, const struct sock_filter_int *insns, int insn_len, const char *license); bpf_prog_load() stores verifier log into global bpf_log_buf[] array and BPF_*() macros to build instructions 2. test stubs configure eBPF infra with 'unspec' map and program types. These are fake types used by user space testsuite only. 3. verifier tests valid and invalid programs and expects predefined error log messages from kernel. 40 tests so far. $ sudo ./test_verifier #0 add+sub+mul OK #1 unreachable OK #2 unreachable2 OK #3 out of range jump OK #4 out of range jump2 OK #5 test1 ld_imm64 OK ... Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Alexei Starovoitov
|
51580e798c |
bpf: verifier (add docs)
this patch adds all of eBPF verfier documentation and empty bpf_check() The end goal for the verifier is to statically check safety of the program. Verifier will catch: - loops - out of range jumps - unreachable instructions - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention More details in Documentation/networking/filter.txt Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Alexei Starovoitov
|
99c55f7d47 |
bpf: introduce BPF syscall and maps
BPF syscall is a multiplexor for a range of different operations on eBPF.
This patch introduces syscall with single command to create a map.
Next patch adds commands to access maps.
'maps' is a generic storage of different types for sharing data between kernel
and userspace.
Userspace example:
/* this syscall wrapper creates a map with given type and attributes
* and returns map_fd on success.
* use close(map_fd) to delete the map
*/
int bpf_create_map(enum bpf_map_type map_type, int key_size,
int value_size, int max_entries)
{
union bpf_attr attr = {
.map_type = map_type,
.key_size = key_size,
.value_size = value_size,
.max_entries = max_entries
};
return bpf(BPF_MAP_CREATE, &attr, sizeof(attr));
}
'union bpf_attr' is backwards compatible with future extensions.
More details in Documentation/networking/filter.txt and in manpage
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
Alexei Starovoitov
|
f5bffecda9 |
net: filter: split filter.c into two files
BPF is used in several kernel components. This split creates logical boundary between generic eBPF core and the rest kernel/bpf/core.c: eBPF interpreter net/core/filter.c: classic->eBPF converter, classic verifiers, socket filters This patch only moves functions. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> |