Make sure that the DSP has no DMA channels allocated once the firmware
is downloaded, and that the default audio streams in use by the DSP are
setup in the correct order.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-5-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add functions for both reading and writing to the 8051's exram. Also,
add a little bit of documentation on how the addresses are segmented.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-4-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reset the codec upon initialization to clear out anything that may have
been setup on a previous boot into Windows, or in case of an improper
shutdown.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-2-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A problem exists in enabling silent stream when connection type is
DisplayPort. Silent stream programming is completed when a new DP
receiver is connected, but infoframe transmission does not actually
start until PCM is opened for the first time. This can result in audible
gap of multiple seconds. This only affects the first PCM open.
Fix the issue by properly assigning a converter to the silent stream,
and modifying the required stream ID programming sequence.
This change only affects Intel display audio codecs.
BugLink: https://github.com/thesofproject/linux/issues/2468
Fixes: 951894cf30 ("ALSA: hda/hdmi: Add Intel silent stream support")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201210174445.3134104-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Steinberg UR22 (with USB ID 0499:1509) requires the implicit feedback
for the proper playback, otherwise it causes occasional cracks.
This patch adds the corresponding the quirk table entry with the
recently added generic implicit fb support.
Reported-and-tested-by: Kilian <meschi@posteo.de>
Link: https://lore.kernel.org/r/20201209161835.13625-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It seems that the HD-audio clear and reconfig sysfs don't work any
longer after the recent driver core change. There are multiple issues
around that: the linked list corruption and the dead device handling.
The former issue is fixed by another patch for the driver core itself,
while the latter patch needs to be addressed in HD-audio side.
This patch corresponds to the latter, it recovers those broken
functions by replacing the device detach and attach actions with the
standard core API functions, which are almost equivalent with unbind
and bind actions.
Fixes: 654888327e ("driver core: Avoid binding drivers to dead devices")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209207
Link: https://lore.kernel.org/r/20201209150119.7705-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a driver for simple mux driven by gpios. It currently only supports one
gpio, muxing one of two inputs to a single output.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201205001508.346439-2-alexandre.belloni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Expand SOF support for Alder Lake by adding ACPI machine tables
for ADL-S systems with SoundWire codecs. Modify kernel config
to choose SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE for these
platforms.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201209153102.3028310-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Initial support for ADL w/ RT711
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201209153102.3028310-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Users reported that some Lenovo AMD platforms do not have ACP microphone,
but the BIOS advertises it via ACPI.
This patch create a simple DMI table, where those machines with the broken
BIOS can be added. The DMI description for Lenovo IdeaPad 5 and
IdeaPad Flex 5 devices are added there.
Also describe the dmic_acpi_check kernel module parameter in a more
understandable way.
Cc: <stable@kernel.org>
Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20201208171200.2737620-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
In some projects, the device ID register is not read correctly.
This patch helps to verify the issue is caused from i2c host or client.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20201209091308.2823-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cap-less mode is useful e.g. if the headphones are used as an antenna
for a FM radio, so that the signal is not altered. For everything else,
we want the cap-couple mode.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-5-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
When using cap-coupled outputs, the RUP/RDO can take much longer than
the 100ms timeout we used to have. Increase that timeout to one second.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-3-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
In case a poll for RUP times out, we might be left with some IRQ flags
that should be cleared before the next power on.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-2-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_trigger() calls DAI/Component/Link trigger,
but some of them might be failed.
static int soc_pcm_trigger(...)
{
...
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
ret = snd_soc_link_trigger(substream, cmd);
if (ret < 0)
break;
(*) ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_dai_trigger(substream, cmd);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
ret = snd_soc_pcm_dai_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_link_trigger(substream, cmd);
break;
}
...
}
For example, if soc_pcm_trigger() failed at (*) point,
we need to rollback previous succeeded trigger.
This patch adds trigger mark for DAI/Component/Link,
and do STOP if START/RESUME/PAUSE_RELEASE were failed.
Because it need to use new rollback parameter,
we need to modify DAI/Component/Link trigger functions in the same time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6uycssd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_be_dai_trigger() is calling dpcm_do_trigger()
at each SNDRV_PCM_TRIGGER_xxx (1).
int dpcm_be_dai_trigger(...)
{
for_each_dpcm_be(fe, stream, dpcm) {
(B) ...
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_RESUME:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_STOP:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_SUSPEND:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
...
(1) ret = dpcm_do_trigger(...);
...
}
}
}
But it is just very verbose and duplicated function.
Because We can indicate dev_dbg() (A) at dpcm_be_dai_trigger() (B).
And dev_err() (C) is not needed because soc_pcm_trigger() itself
indicates error message when error.
static int dpcm_do_trigger(...)
{
int ret;
(A) dev_dbg(...);
ret = soc_pcm_trigger(substream, cmd);
if (ret < 0)
(C) dev_err(...);
return ret;
}
This patch replace dpcm_do_trigger() to soc_pcm_trigger().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blfecssk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These error paths return success but they should return -EINVAL.
Fixes: 97ed3e509e ("ASoC: max98390: Fix potential crash during param fw loading")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9B0uz4svyNTqeMb@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Tha ARCHOS Cesium 140 tablet has problem with the jack-sensing,
thus the heaset functions are not working.
Add quirk for this model to select the correct input map, jack-detect
options and channel map to enable jack sensing and headset microphone.
This device uses IN1 for its internal MIC and JD2 for jack-detect.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201208060414.27646-1-chiu@endlessos.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASUS laptop Q524UQK with ALC255 codec can't detect the headset
microphone until ALC255_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201209045730.9972-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To help in debugging issues with DisplayPort Multi-Stream Transport (aka
DP-MST) support, print information of active connections for each device
of a display audio pin widget.
Example output with the patch with two monitors connected to a DP-MST hub:
Devices: 4
Dev 00: PD = 0, ELDV = 0, IA = 0, Connections [ 0x03* 0x05 0x07 0x09 ]
Dev 01: PD = 1, ELDV = 1, IA = 0, Connections [ 0x03* 0x05 0x07 0x09 ]
*Dev 02: PD = 1, ELDV = 1, IA = 0, Connections [ 0x03 0x05* 0x07 0x09 ]
Dev 03: PD = 0, ELDV = 0, IA = 0, Connections [ 0x03* 0x05 0x07 0x09 ]
Connection: 4
0x03 0x05* 0x07 0x09
Format of existing "Connection:" entry is left intact to keep
compatibility.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201208185736.2877541-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hi All,
Here are 2 simple fixes which are necessary to make the
cht_bsw_nau8824 machine driver work together with the
sof-audio-acpi driver.
Note that atm the sof topology files are missing a .tplg
file for this setup. Simply copying over the standard
sof-byte-codec.tplg file does the trick, but then some
mixer setting changes are necessary to fix the right
speaker/headphones channel not working; and those mixer
settings break the right channel when used with the
sst-acpi driver.
I've been trying to fix this at the tplg level so that
we do not need to change the mixer settings, but no luck
sofar. I'll post a RFC with the topology changes which
I have and we can discuss this further there.
These 2 simple fixes are necessary to make the sof-audio-acpi
driver work regardless of the topology issue.
Regards,
Hans
cz_da7219_init() does not check the return values of clk_get(),
while da7219_clk_enable() calls clk_set_rate() to dereference
the pointers.
Add checks to fix the problems.
Also, change clk_get() to devm_clk_get() to avoid data leak after
failures.
Fixes: bb24a31ed5 ("ASoC: AMD: Configure wclk and bclk of master codec")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20201204063610.513556-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cx2072x codec driver defines multiple DAIs with the same stream
name "Playback" and "Capture". Although the current code works more
or less as is as the secondary streams are never used, it still leads
the error message like:
debugfs: File 'Playback' in directory 'dapm' already present!
debugfs: File 'Capture' in directory 'dapm' already present!
Fix it by renaming the secondary streams to unique names.
Fixes: a497a43637 ("ASoC: Add support for Conexant CX2072X CODEC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201208135154.9188-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is initially designed for sound card using HDMI
interface on i.MX platform. There is internal HDMI IP or
external HDMI modules connect with SAI or AUD2HTX interface.
It supports both transmitter and receiver devices.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1607251319-5821-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd-soc-sst-acpi driver does not care about the id specified for
the SSP2-Codec DAI, but it does matter for the snd-sof-acpi driver;
and when it is not 0 then the snd-sof-acpi driver does not work.
Set the SSP2-Codec DAI id to 0, fixing the snd-sof-acpi driver not
working on devices using the cht_bsw_nau8824 machine-driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201206122436.13553-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using the snd-soc-sst-acpi driver then the compress-cpu-dai bits are
not used, the cht_bsw_nau8824 machine-driver is the only BYT/CHT driver
defining them.
When using the snd-sof-acpi driver then the presence of the
compress-cpu-dai bits breaks things because the sof topology file for
by/cht devices does not contain routing info for them.
Drop the compress-cpu-dai bits, fixing the snd-sof-acpi driver not
working on devices using the cht_bsw_nau8824 machine-driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201206122436.13553-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "filter" debugfs file defines the log levels used by
the firmware and reported by sof-logger.
The file contains the formatted entry list, where each entry
follows the following syntax in plain text:
log_level uuid_id pipe_id comp_id;
This file may be updated by userspace applications such sof-logger,
or directly by the user during debugging process.
An unused (wildcard) pipe_id or comp_id value should be set to -1,
uuid_id is hexadecimal value, so when unused then should be set to 0.
When the file is modified, an IPC command is sent to FW with new
trace levels for selected components in filter elements list.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201204165014.2697903-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A recent change removed the call to send the DAPM_STREAM_STOP
event in dpcm_fe_dai_shutdown. But this causes a regression
when a PCM prepare is not paired with a hw_free. So, add
the DAPM_STREAM_STOP event back to dpcm_fe_dai_shutdown()
to fix this.
The new sequence would be:
soc_pcm_prepare()
-> SND_SOC_DAPM_STREAM_START
soc_pcm_hw_free()
-> soc_pcm_hw_free()
-> SND_SOC_DAPM_STREAM_STOP
dpcm_fe_dai_shutdown()
-> SND_SOC_DAPM_STREAM_STOP
Note that the DAPM_STREAM_STOP will be called twice but it seems
harmless.
Fixes: a27b421f1d ('ASoC: pcm: call snd_soc_dapm_stream_stop() in soc_pcm_hw_clean')
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201202193343.912942-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASUS laptop X430UN with ALC256 can't detect the headset microphone
until ALC256_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201207072755.16210-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_seq_queue struct contains various flags in the bit fields.
Those are categorized to two different use cases, both of which are
protected by different spinlocks. That implies that there are still
potential risks of the bad operations for bit fields by concurrent
accesses.
For addressing the problem, this patch rearranges those flags to be
a standard bool instead of a bit field.
Reported-by: syzbot+63cbe31877bb80ef58f5@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201206083456.21110-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This change could fix 2 issues on this machine:
- the bass speaker's output volume can't be adjusted, that is because
the bass speaker is routed to the DAC (Nid 0x6) which has no volume
control.
- after plugging a headset with vol+, vol- and pause buttons on it,
press those buttons, nothing happens, this means those buttons
don't work at all. This machine has alc287 codec, need to add the
codec id to the disable/enable_headset_jack_key(), then the headset
button could work.
The quirk of ALC285_FIXUP_THINKPAD_HEADSET_JACK could fix both of these
2 issues.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20201205051130.8122-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When CONFIG_PM is disabled, we get a warning for unused functions:
sound/soc/fsl/fsl_aud2htx.c:261:12: error: unused function 'fsl_aud2htx_runtime_suspend' [-Werror,-Wunused-function]
static int fsl_aud2htx_runtime_suspend(struct device *dev)
sound/soc/fsl/fsl_aud2htx.c:271:12: error: unused function 'fsl_aud2htx_runtime_resume' [-Werror,-Wunused-function]
static int fsl_aud2htx_runtime_resume(struct device *dev)
Mark these as __maybe_unused to avoid the warning without adding
an #ifdef.
Fixes: 8a24c834c0 ("ASoC: fsl_aud2htx: Add aud2htx module driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20201203222900.1042578-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the driver data for two rt1011 speaker amplifiers on
SSP1 and rt5682 on SSP0 for TGL platform. DAI format for rt1011 is
leveraged from cml_rt1011_rt5682 which is 4-slot tdm with 100fs bclk.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201203154010.29464-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Compile-testing this driver on an older platform without CONFIG_COMMON_CLK fails with
ERROR: modpost: "clk_set_min_rate" [sound/soc/atmel/snd-soc-mchp-spdifrx.ko] undefined!
Make this is a strict dependency.
Fixes: ef265c55c1 ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201203223815.1353451-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
gcc points out a memory area that is copied to a device
but not initialized:
sound/soc/codecs/cros_ec_codec.c: In function 'i2s_rx_event':
arch/x86/include/asm/string_32.h:83:20: error: '*((void *)&p+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
83 | *((int *)to + 1) = *((int *)from + 1);
Initialize all the unused fields to zero.
Fixes: 727f1c71c7 ("ASoC: cros_ec_codec: refactor I2S RX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201203225458.1477830-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX8oseA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylqGQCdF2TND5jjcETWHIrunPAX6iEDLecAnjyIMc4q
cIr5piwCq+m6/S2gSCpA
=t7EL
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/KnpUACgkQJNaLcl1U
h9CWvQf9EdHZFlsDiP8PbbSLtMzpkqaJOlmg3A1Rn6XOYjztDEDQQp12vYC9jOmJ
PkBz8kh+0dohTt6TIx5IEt+r1pbYWAzFOkX7v3QzYp8+nrmd1bT/RDRglOrmydLH
ntd9XNE1BA8k9n4YQQBWrspDEnwnpCygSw4lP/QXz7OyyhnZ7fYGOG3hPXKw+Sdj
gQugmSAnUYaVti4d7K6Cuhj08HT13FvGFqrkLYljTmsnnVw0T4kXNFtiODMe1QMq
YYeKiHCFI8ysk2hK0sYdmwr5rz5eWT5mGnSXPGsD3o876NF1uw+Q5iTX57uydDrp
GijjnCOGz+yZ7dfBi2MAflP5Xsw4ew==
=SVwj
-----END PGP SIGNATURE-----
Merge tag 'auxbus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into asoc-5.11
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
setting clock rate on child clocks without a parent clock rate will
result in zero clk rate for child. This also means that when audio
is started dsp will attempt to access registers without enabling
clock resulting in board boot up.
Fix this by adding the missing parent clock rate.
Fixes: 520a1c396d ("ASoC: q6afe-clocks: add q6afe clock controller")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201204164228.1826-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
jz4740_i2s_set_sysclk() does not check the return values of clk_get(),
while the file dereferences the pointers in clk_put().
Add the missed checks to fix it.
Fixes: 11bd3dd1b7 ("ASoC: Add JZ4740 ASoC support")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20201203144227.418194-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adapt STM32 DFSDM driver to a change in iio_channel_get_all_cb() API.
The callback pointer becomes a requested parameter of this API,
so add a dummy callback to be given as parameter of this function.
However, the stm32_dfsdm_get_buff_cb() API is still used instead,
to optimize DMA transfers.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20201121161457.957-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver core ignores the return value of struct device_driver::remove
because there is only little that can be done. For the shutdown callback
it's ps3_system_bus_shutdown() which ignores the return value.
To simplify the quest to make struct device_driver::remove return void,
let struct ps3_system_bus_driver::remove return void, too. All users
already unconditionally return 0, this commit makes it obvious that
returning an error code is a bad idea and ensures future users behave
accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126165950.2554997-2-u.kleine-koenig@pengutronix.de
The remove callback is only called for devices that were probed
successfully before. As the matching probe function cannot complete
without error if dev->match_id != PS3_MATCH_ID_SOUND, we don't have to
check this here.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126165950.2554997-1-u.kleine-koenig@pengutronix.de
The si476x codec is used for FM radio function on i.MX6
auto board, it only supports recording function.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1606708668-28786-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .data field is only used to pass the string name to
platform_device_register_data().
Pass the string name directly to make the code simpler.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201203013439.10617-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The series supports new machines with rt1015p and rt5682. Reuses most of
the code in mt8192-mt6359-rt1015-rt5682.c.
The first 3 patches refactor the existing mt8192-mt6359-rt1015-rt5682.c.
For easier to support newly added components later.
The 4th patch fixes a typo in DT bindings document.
The 5th patch proposes a new compatible string "mt8192_mt6359_rt1015p_rt5682"
for machines with rt1015p and rt5682.
The 6th patch reuses the existing machine driver to support machines with
rt1015p and rt5682.
Tzung-Bi Shih (6):
ASoC: mediatek: mt8192: rename common symbols
ASoC: mediatek: mt8192: extract rt1015_rt5682 specific DAI link
ASoC: mediatek: mt8192: move rt1015_rt5682 specific data
ASoC: dt-bindings: mt8192-mt6359: fix typo in the example
ASoC: dt-bindings: mt8192-mt6359: add new compatible for using rt1015p
ASoC: mediatek: mt8192: support rt1015p_rt5682
.../sound/mt8192-mt6359-rt1015-rt5682.yaml | 6 +-
sound/soc/mediatek/Kconfig | 1 +
.../mt8192/mt8192-mt6359-rt1015-rt5682.c | 171 +++++++++++++-----
3 files changed, 129 insertions(+), 49 deletions(-)
--
2.29.2.454.gaff20da3a2-goog
SND_SOC_ADAU1372_I2C and SND_SOC_ADAU1372_SPI prpoerly select the REGMAP
config they need but forget to depend on the underlying bus.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201130215626.2400999-1-alexandre.belloni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "decimator" variable is in the 0-7 range and it's unsigned so there
is no need to check for negative values.
Fixes: 908e6b1df2 ("ASoC: codecs: lpass-va-macro: Add support to VA Macro")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X8c5gjZO7YN/CFsq@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Supports machines with rt1015p and rt5682. Uses new proposed compatible
string "mt8192_mt6359_rt1015p_rt5682".
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201201132614.1691352-7-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extracts rt1015_rt5682 specific DAI link from the common one. Fills the
DAI link data according to of_match.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201201132614.1691352-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renames common symbols from "mt8192_mt6359_rt1015_rt5682" to
"mt8192_mt6359".
They will share between a few machine drivers on MT8192 and MT6359
with some different audio components.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201201132614.1691352-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Speaker amp's SSP bclk configuration was changed in the topology file to be
based on 12.288MHz and dai_ops->hw_params is based on s32le format.
But, the TDM slot size remained set to 24 bits.
This inconsistency created audible noises and needs to be corrected.
This patch updates TDM slot width to 32.
Fixes: bc7477fc2a ("ASoC: Intel: Boards: tgl_max98373: Update TDM configuration in hw_params")
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201201211150.433472-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Series introducing a modified boot sequence for the Intel Ice Lake
platform. While no bugs are currently open for this, the current
DSP boot implementation does not follow the full programming sequence.
This patchset is the first instance where SOF driver uses data in
the extended manifest (part of the firmware binary), to influence
the boot process. IPC cannot be used to get this information, as it
is already needed for early boot.
This change is backwards compatible with old firmware versions,
where extended manifest is not available.
Fred Oh (5):
ASoC: SOF: ops: add parse_platform_ext_manifest() op
ASoC: SOF: Intel: hda: define parse_platform_ext_manifest op
ASoC: SOF: ext_manifest: parse cavs extra config data elem
ASoC: SOF: ops: modify the signature of stall op
ASoC: SOF: Intel: hda: add sof_icl_ops for ICL platforms
include/sound/sof/ext_manifest.h | 1 +
sound/soc/sof/intel/Makefile | 2 +-
sound/soc/sof/intel/apl.c | 3 +
sound/soc/sof/intel/cnl.c | 19 +---
sound/soc/sof/intel/ext_manifest.h | 35 +++++++
sound/soc/sof/intel/hda-loader.c | 100 ++++++++++++++++++++
sound/soc/sof/intel/hda.h | 11 +++
sound/soc/sof/intel/icl.c | 145 +++++++++++++++++++++++++++++
sound/soc/sof/intel/tgl.c | 3 +
sound/soc/sof/loader.c | 3 +
sound/soc/sof/ops.h | 14 ++-
sound/soc/sof/sof-pci-dev.c | 2 +-
sound/soc/sof/sof-priv.h | 7 +-
13 files changed, 324 insertions(+), 21 deletions(-)
create mode 100644 sound/soc/sof/intel/ext_manifest.h
create mode 100644 sound/soc/sof/intel/icl.c
--
2.28.0
Hi,
this is a set of patches to address the errors appearing on the
machine that has no I2S DMIC on AMD machine but probed.
Takashi
===
Takashi Iwai (2):
ASoC: amd: Downgrade print level for invalid ACP mode
ASoC: amd: Return -ENODEV for non-existing ACPI call
sound/soc/amd/raven/pci-acp3x.c | 2 +-
sound/soc/amd/renoir/rn-pci-acp3x.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--
2.26.2
Add support for the Analog Devices ADAU1372 audio CODEC.
[Alexandre Belloni: allow 32kHz for TDM4 in slave mode]
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201127123030.1610574-2-alexandre.belloni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-core.c don't need sound/jack.h anymore, but asoc.h needs it.
This patch fixup header magic.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2iju3zm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AMD Renoir driver tries to identify the presence of DMIC by evaluating
ACPI _WOV entry, and it returns -EINVAL when the ACPI call failed.
This ended up an error message like
snd_rn_pci_acp3x: probe of 0000:04:00.5 failed with error -22
although the system is correctly set up.
For avoiding such a superfluous error message, change the return value
to -ENODEV. Then the driver core just skips to the next one without
complaining.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201127143200.16272-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The acp3x raven driver skips the probing when the given device isn't
connected with I2S. This skip behavior itself is fine, but the driver
also emits an error message "Invalid ACP audio mode" with KERN_ERR.
This isn't nice since it appears on the boot screen even if a boot
splash is running, although this itself is no real error.
Downgrade the print level to KERN_INFO so that this message won't
appear on the console unnecessarily.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201127143200.16272-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Yet another quirk for Pioneer DJ DDJ-SR2, which is quite similar like
other DJ DDJ models but with slightly different EPs or channels.
Reported-by: Geraldo <geraldogabriel@gmail.com>
Link: https://lore.kernel.org/r/20201130083714.10640-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Spectre x360 Convertible 15" version (SSID 103c:827f) needs the
same quirk to make the mute LED working like other models.
System Information
Manufacturer: HP
Product Name: HP Spectre x360 Convertible 15-bl1XX
Sound Codec:
Codec: Realtek ALC295
Vendor Id: 0x10ec0295
Subsystem Id: 0x103c827f
Revision Id: 0x100002
Reported-by: <christoph.plattner@gmx.at>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201128090015.7743-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The check for the FW_FEATURE_PS3_LV1 firmware feature is already performed
in ps3_system_bus_init() before registering the driver. So if the probe
function is actually used, this feature is already known to be available.
The check for the match id is also superfluous; the condition is always
true because the bus' match function (ps3_system_bus_match()) only
considers this driver for devices having:
dev->match_id == snd_ps3_bus_driver_info.match_id.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Leonard Goehrs <l.goehrs@pengutronix.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Geoff Levand <geoff@infradead.org>
Link: https://lore.kernel.org/r/20201127152259.1470079-1-l.goehrs@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The remove callback is only called for devices that were probed
successfully before. As the matching probe function cannot complete
without error if dev->match_id != PS3_MATCH_ID_SOUND, we don't have to
check this here.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geoff Levand <geoff@infradead.org>
Link: https://lore.kernel.org/r/20201126165950.2554997-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch allows the Pioneer DJ DDJ-RR to be seen as a USB audio
device under Linux and therefore usable in such applications as
Mixxx.
Tested Master Audio out, headphones (both output jacks) and microphone
input. All work perfectly.
Signed-off-by: Daniel Martin <dmanlfc@gmail.com>
Link: https://lore.kernel.org/r/20201128084035.2958-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The setup of unsolicited event callbacks should be done only once at
the parser phase, not in the init phase that is called multiple times
at each resume.
This patch moves the unsol setup code in ca0132 codec driver to the
more appropriate place.
Reported-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200930113008.9307-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS Zephyrus G14 has two speaker pins, and the auto-parser tries to
assign an individual DAC to each pin as much as possible.
Unfortunately the third DAC has no volume control unlike the two DACs,
and this resulted in the inconsistent speaker volumes.
As a workaround, wire both speaker pins to the same DAC by modifying
the existing quirk (ALC289_FIXUP_ASUS_GA401) applied to this device.
Since this quirk entry is chained by another, we need to avoid
applying the DAC assignment change for it. Luckily, there is another
quirk entry (ALC289_FIXUP_ASUS_GA502) doing the very same thing, so we
can chain to the GA502 quirk instead.
Note that this patch uses a new flag of the generic parser,
obey_preferred_dacs, for enforcing the DACs.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210359
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201127141104.11041-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The generic parser accepts the preferred_dacs[] pairs as a hint for
assigning a DAC to each pin, but this hint doesn't work always
effectively. Currently it's merely a secondary choice after the trial
with the path index failed. This made sometimes it difficult to
assign DACs without mimicking the connection list and/or the badness
table.
This patch adds a new flag, obey_preferred_dacs, that changes the
behavior of the parser. As its name stands, the parser obeys the
given preferred_dacs[] pairs by skipping the path index matching and
giving a high penalty if no DAC is assigned by the pairs. This mode
will help for assigning the fixed DACs forcibly from the codec
driver.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201127141104.11041-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With a stream with low bitrate, user can't pause or resume the stream
near the end of the stream because current ALSA doesn't allow it.
If the stream has very low bitrate enough to store whole stream into
the buffer, user can't do anything except stop the stream and then
restart it from the first because most of applications call draining
after sending last frame to the kernel.
If pause, resume are allowed during draining, user experience can be
enhanced.
To prevent malfunction in HW drivers which don't support pause
during draining, pause during draining will only work if HW driver
enable this feature explicitly by calling
snd_compr_use_pause_in_draining().
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/000101d6c3f0$89b312b0$9d193810$@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Separate the dsp ops for ICL ops to specify the use of ICCMAX
FW boot sequence in the run op. All other ops are identical with TGL
except post_fw_run. The recommended HW programming sequence for ICL
is to power up core 3 and keep it in stall if HPRO is enabled.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the signature of stall op to specify core_mask to stall cores.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
OUTBOX_SIZE, INBOX_SIZE are defined but not being used yet. Handle
these elements to avoid warning about unknown token type.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the parse_platform_ext_manifest() op for HDA platforms to parse
the SOF_EXT_MAN_CAVS_CONFIG_CAVS_LPRO config item to determine if the FW
is configured for LPRO. The default clock configuration is assumed to be
HPRO in the absence of this item in the extended manifest.
New member clk_config_lpro is added to struct sof_intel_hda_dev to store
the FW clock config information and that this will be used later to perform
platform-specific operations in the post_fw_run op.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add parse_platform_ext_manifest() op to parse platform-specific config
data in the extended manifest.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
the microphone is attached to external codec(adau7002)
instead of rt5682.We need to always use 32 bit format on sc7180
to meet the clock requirement of adau7002:
The ADAU7002 requires a BCLK rate
that is a minimum of 64× the LRCLK sample rate
Signed-off-by: xuyuqing <xuyuqing@huaqin.corp-partner.google.com>
Link: https://lore.kernel.org/r/20201118005858.123013-2-xuyuqing@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A small set of driver specific fixes, plus a new platform quirk from
Hans.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/A98YACgkQJNaLcl1U
h9ClFggAgPr2/KIB3kRZCaKXaNgQ7oqgPdf0NNMYmwAnLaRK+t1EL0GdiyP5AxDA
sU9RWjoXyCmoe+dqmlS7Iavcj2Ne+y7w2isonrreI26LFrAkO8jL2mo656NArMjx
cxIhjF7sNWVbel2MYhrRSta8LkqrI8FiSV8elGW5DttGyceYHuoNXjo4AN3emnk3
V5kx9uT/kC1ef7SseLeN868VAMM5n42bZV+Eide/DJwYivlX7Hcwaqmax7FPjuYe
J/n3VrNh+AjABvpzPXBD+6e7X8aiYtQWAAtBz2FZLoL+4bREiG4qWP2kW4nwnisS
Bl0W0rE2LvctIKqkAey4/JUwwWCkXg==
=39QE
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.10-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.10
A small set of driver specific fixes, plus a new platform quirk from
Hans.
snd_soc_suspend() and soc_resume_deferred() are calling
same snd_soc_dapm_stream_event() with same logic with different parameter.
This patch adds new soc_dapm_suspend_resume() and share the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87im9rekfp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_suspend() and soc_resume_deferred() are calling
same snd_soc_dai_digital_mute() with same logic with different parameter.
This patch adds new soc_playback_digital_mute() and share the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0u7ekfv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Mark
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
This kind of duplicated code can be a hotbed of bugs,
thus, this patch-set share soc_compr_free() and rollback.
Kuninori Morimoto (5):
ASoC: soc-compress: move soc_compr_free() next to soc_compr_open()
ASoC: soc-dai: add mark for snd_soc_dai_compr_startup/shutdown()
ASoC: soc-component: add mark for snd_soc_component_compr_open/free()
ASoC: soc-component: add mark for snd_soc_link_compr_startup/shutdown()
ASoC: soc-compress: add soc_compr_clean() and call it from soc_compr_open/free()
include/sound/soc-component.h | 6 +-
include/sound/soc-dai.h | 4 +-
include/sound/soc-link.h | 3 +-
include/sound/soc.h | 1 +
sound/soc/soc-component.c | 17 +++--
sound/soc/soc-compress.c | 115 +++++++++++++++++-----------------
sound/soc/soc-dai.c | 13 +++-
sound/soc/soc-link.c | 11 +++-
8 files changed, 95 insertions(+), 75 deletions(-)
--
2.25.1
Hi,
Changes since v1:
1. New patch 2/39: ASoC: bd28623: mark OF related data as maybe unused,
2. Patches 1-13: add maybe_unused after discussions with Mark,
3. Add Sylwester's review to two patches (one changed so please review
one more time).
Best regards,
Krzysztof
Krzysztof Kozlowski (39):
ASoC: ak5558: mark OF related data as maybe unused
ASoC: bd28623: mark OF related data as maybe unused
ASoC: gtm601: mark OF related data as maybe unused
ASoC: inno_rk3036: mark OF related data as maybe unused
ASoC: rk3328: mark OF related data as maybe unused
ASoC: tas571x: mark OF related data as maybe unused
ASoC: kirkwood: armada-370-db: mark OF related data as maybe unused
ASoC: meson: t9015: mark OF related data as maybe unused
ASoC: qcom: mark OF related data as maybe unused
ASoC: samsung: smdk_wm8994: mark OF related data as maybe unused
ASoC: rockchip: mark OF related data as maybe unused
ASoC: ti: davinci: mark OF related data as maybe unused
ASoC: uniphier: mark OF related data as maybe unused
ASoC: ak4118: skip of_device_id table when !CONFIG_OF
ASoC: alc5623: skip of_device_id table when !CONFIG_OF
ASoC: alc5632: skip of_device_id table when !CONFIG_OF
ASoC: da7218: skip of_device_id table when !CONFIG_OF
ASoC: da7219: skip of_device_id table when !CONFIG_OF
ASoC: da9055: skip of_device_id table when !CONFIG_OF
ASoC: es8316: skip of_device_id table when !CONFIG_OF
ASoC: max98090: skip of_device_id table when !CONFIG_OF
ASoC: max98095: skip of_device_id table when !CONFIG_OF
ASoC: max98371: skip of_device_id table when !CONFIG_OF
ASoC: max9867: skip of_device_id table when !CONFIG_OF
ASoC: max98925: skip of_device_id table when !CONFIG_OF
ASoC: max98926: skip of_device_id table when !CONFIG_OF
ASoC: pcm1789: skip of_device_id table when !CONFIG_OF
ASoC: pcm179x: skip of_device_id table when !CONFIG_OF
ASoC: rt5660: skip of_device_id table when !CONFIG_OF
ASoC: tas2562: skip of_device_id table when !CONFIG_OF
ASoC: tlv320: skip of_device_id table when !CONFIG_OF
ASoC: ts3a227e: skip of_device_id table when !CONFIG_OF
ASoC: es7134: mark OF related data as maybe unused
ASoC: es7241: mark OF related data as maybe unused
ASoC: samsung: i2s: mark OF related data as maybe unused
ASoC: max98371: drop driver pm=NULL assignment
ASoC: max98925: drop driver pm=NULL assignment
ASoC: max98926: drop driver pm=NULL assignment
ASoC: samsung: smdk_wm8994: remove redundant of_match_ptr()
sound/soc/codecs/ak4118.c | 2 ++
sound/soc/codecs/ak5558.c | 2 +-
sound/soc/codecs/alc5623.c | 2 ++
sound/soc/codecs/alc5632.c | 2 ++
sound/soc/codecs/bd28623.c | 2 +-
sound/soc/codecs/da7218.c | 2 ++
sound/soc/codecs/da7219.c | 2 ++
sound/soc/codecs/da9055.c | 2 ++
sound/soc/codecs/es7134.c | 4 ++--
sound/soc/codecs/es7241.c | 2 +-
sound/soc/codecs/es8316.c | 2 ++
sound/soc/codecs/gtm601.c | 2 +-
sound/soc/codecs/inno_rk3036.c | 2 +-
sound/soc/codecs/max98090.c | 2 ++
sound/soc/codecs/max98095.c | 2 ++
sound/soc/codecs/max98371.c | 3 ++-
sound/soc/codecs/max9867.c | 2 ++
sound/soc/codecs/max98925.c | 3 ++-
sound/soc/codecs/max98926.c | 3 ++-
sound/soc/codecs/pcm1789-i2c.c | 2 ++
sound/soc/codecs/pcm179x-i2c.c | 2 ++
sound/soc/codecs/rk3328_codec.c | 2 +-
sound/soc/codecs/rt5660.c | 2 ++
sound/soc/codecs/tas2562.c | 2 ++
sound/soc/codecs/tas571x.c | 4 ++--
sound/soc/codecs/tlv320adcx140.c | 2 ++
sound/soc/codecs/tlv320aic23-i2c.c | 2 ++
sound/soc/codecs/ts3a227e.c | 2 ++
sound/soc/kirkwood/armada-370-db.c | 2 +-
sound/soc/meson/t9015.c | 2 +-
sound/soc/qcom/apq8016_sbc.c | 2 +-
sound/soc/qcom/lpass-apq8016.c | 2 +-
sound/soc/qcom/lpass-ipq806x.c | 2 +-
sound/soc/qcom/lpass-sc7180.c | 2 +-
sound/soc/rockchip/rockchip_i2s.c | 2 +-
sound/soc/rockchip/rockchip_pdm.c | 2 +-
sound/soc/rockchip/rockchip_spdif.c | 2 +-
sound/soc/samsung/i2s.c | 8 ++++----
sound/soc/samsung/smdk_wm8994.c | 4 ++--
sound/soc/ti/davinci-i2s.c | 2 +-
sound/soc/uniphier/aio-ld11.c | 2 +-
sound/soc/uniphier/aio-pxs2.c | 2 +-
sound/soc/uniphier/evea.c | 2 +-
43 files changed, 69 insertions(+), 32 deletions(-)
--
2.25.1
First version of rt715 sdw sdca codec driver.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201103172226.4278-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
Now, soc_compr_open/free() are handling
1) snd_soc_dai_compr_startup/shutdown()
2) snd_soc_component_compr_open/free()
3) snd_soc_link_compr_startup/shutdown()
Now, 1) to 3) are handled.
This patch adds new soc_compr_clean() and call it from
soc_compr_open() as rollback, and from soc_compr_free_free() as
normal close handler.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ima25iwa.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
1) snd_soc_dai_compr_startup/shutdown()
2) snd_soc_component_compr_open/free()
=> 3) snd_soc_link_compr_startup/shutdown()
This patch is for 3) snd_soc_link_compr_startup/shutdown()
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0ui5iwf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
1) snd_soc_dai_compr_startup/shutdown()
=> 2) snd_soc_component_compr_open/free()
3) snd_soc_link_compr_startup/shutdown()
This patch is for 2) snd_soc_component_compr_open/free(),
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfey5iwk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
=> 1) snd_soc_dai_compr_startup/shutdown()
2) snd_soc_component_compr_open/free()
3) snd_soc_link_compr_startup/shutdown()
This patch is for 1) snd_soc_dai_compr_startup/shutdown(),
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtze5iwp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves soc_compr_free() next to soc_compr_open().
This is prepare for soc_compr_open() cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o8ju5iwv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Connor McAdams