Commit Graph

1340 Commits

Author SHA1 Message Date
Zhu Yi 61f6225323 [PATCH] iwlwifi: Update iwlwifi version stamp to 1.1.17
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:27 -07:00
Zhu Yi 0209dc11c7 [PATCH] iwlwifi: add debugfs rate scale stats
This patch adds rates scale statistics to debugfs:
$ cat /sys/kernel/debug/ieee80211/phy<X>/stations/<mac>/rate_stats_table

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:27 -07:00
Zhu Yi 98d7e09af5 [PATCH] iwlwifi: set fixed rate through debugfs
This patch adds fixed rate setting through debugfs

$ echo <rate_n_flags> > \
/sys/kernel/debug/ieee80211/phy<X>/stations/<mac>/rate_scale_table

Currently there is no way to turn to rate scaling working again.
Will be fixed in later.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:26 -07:00
Zhu Yi 1b696de23b [PATCH] iwlwifi: rs_rate_scale_perform clean up
This patch cleans up rs_rate_scale_perform function. It removes dead
code, shortens variable names and removes useless return i.e. function
now returns void.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:26 -07:00
Zhu Yi 02dede04f2 [PATCH] iwlwifi: add supp_rates to rate scale sta private data
This patch adds supp_rate bit mask to rate scale sta private data structre
and thus removes sta from the argument list in helper functions.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:25 -07:00
Zhu Yi 588263515f [PATCH] iwlwifi: limit printouts on hot path
This patch change printouts on TX path to the net_ratelimit version.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:24 -07:00
Zhu Yi 5ae212c927 [PATCH] iwlwifi: add read rate scale table debugfs function
This patch adds read rate scale table debugfs function for 4965
rate scaling module.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:24 -07:00
Zhu Yi 93dc646adb [PATCH] iwlwifi: add debugfs framework to rate scale
This patch adds debugfs handler to rate scale algorithms.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:23 -07:00
Zhu Yi 63fddb9f7f [PATCH] iwlwifi: removing unnecessary memset in 4965 rate scale
This patch removes redundant memset in rate scale. In rs_alloc_sta,
kzalloc is used so the memset can be avoided. In rs_rate_init, it is
a bug fix since it overrides everything set in other handlers namely
add_debugfs.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:23 -07:00
Zhu Yi c14c521e44 [PATCH] iwlwifi: fix add_station to avoid FW error
There were a few Firmware errors reported the most reproducible
http://bughost.org/bugzilla/show_bug.cgi?id=1471

The root cause is rate_n_flags isn't set anymore. This patch fixes
the problem.

Signed-off-by: Ian Schram <ischram@telenet.be>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:22 -07:00
Zhu Yi 46640a8cce [PATCH] iwlwifi: Fix typo in rate sacling algorithm
This patch fixes tiny typo in 4965 rate sacling algorithm

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:21 -07:00
Zhu Yi 556f8db748 [PATCH] iwlwifi: clear station table in rxon unconditionally
This patch clears stations table for every rxon command.
It removes iwl_rxon_add_station function in 3945.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:21 -07:00
Zhu Yi e1493deb74 [PATCH] iwlwifi: Correction for sending beacon in config_ap
This patch takes out sending beacon from conditional in
config_ap function.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:20 -07:00
Zhu Yi cfe0170987 [PATCH] iwlwifi: workaournd REPLY_COMPRESSED_BA command in iwl_rx_handle
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:20 -07:00
Zhu Yi 583fab37da [PATCH] iwlwifi: replacing IPW with IWL in error messages
This patch repaces IPW with IWL in error messages.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:19 -07:00
Michael Wu ce1234d299 [PATCH] adm8211: Detect interface up/down in suspend/resume hooks correctly
Interface up/down detection was incorrectly changed during the filter API
update.

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:10 -07:00
Michael Wu d703e29a88 [PATCH] adm8211: Pass all TXed frames to tx_status_irqsafe
ieee80211_tx_status_irqsafe can handle the freeing of all TXed frames.

Also, set excessive_retries for failed frames.

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:10 -07:00
Michael Wu f6ac0adf54 [PATCH] adm8211: Use revision from pci_dev
No need to load the revision ourselves anymore.

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:09 -07:00
Michael Wu 0d282764eb [PATCH] adm8211: kill version printks
No need to pollute dmesg with copyright info.

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:09 -07:00
Michael Wu fb9bc28f8b [PATCH] adm8211: Improve writing of mac addrs to registers
The mac address write is broken for big endian and the bssid write can be
simplified. This patch does both.

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:08 -07:00
Michael Wu 2e08ac7e27 [PATCH] adm8211: kill interrupt loop
Looping in the interrupt handler is unnecessary.

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:07 -07:00
Ivo van Doorn 3a1532f2f8 [PATCH] rt2x00: Release rt2x00 2.0.9
Version bump

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:07 -07:00
Ivo van Doorn fdd0abc817 [PATCH] rt2x00: Fix panic on rmmod with rfkill enabled
When ieee80211_hw.config indicates that the radio
is enabled and is configuring options that require
the link tuner to be restarted the link tuner will
cause a kernel panic when rfkill has indicated the
radio was in fact disabled.

Signed-off-by: Modestas Vainius <modestas@vainius.eu>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:06 -07:00
Ivo van Doorn dcf5475bc8 [PATCH] rt2x00: Fix obvious typo in comment
Signed-off-by: Modestas Vainius <modestas@vainius.eu>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:06 -07:00
Ivo van Doorn 25ab002f94 [PATCH] rt2x00: Stop link tuning when radio is down
As pointed out by Modestas Vainius the link tuner
could continue working while the radio is already
down. This because at the start of disable_radio
the ENABLED_RADIO flag is cleared and causes the
toggle_rx to skip the stop_link_tuner() call.
This will add a check to the start of the link tuner
which will automatically stop the link tuner when the
radio is disabled.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:05 -07:00
Ivo van Doorn 3e30968e55 [PATCH] rt2x00: make rt2x00lib_stop_link_tuner() reentrant with link_tuner work
Calling cancel_delayed_work_sync() unconditionally won't hurt
and it will avoid race conditions when another CPU is already
executing link_tuner work.

Signed-off-by: Modestas Vainius <modestas@vainius.eu>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:04 -07:00
Ivo van Doorn 643b252123 rt2x00: Add rt2x00dev->flags to debugfs
Loosely based on the patch by Matthijs Kooijman,
this will add the dev_flags entry into debugfs which
will display rt2x00dev->flags.
This will allow easier debugging of flag handling.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:04 -07:00
Ivo van Doorn 066cb637b1 [PATCH] rt2x00: Reorganize rt2x00dev->flags
The rt2x00dev->flags has become a chaos over time,
this will reorganize the flags by renaming, deleting, adding
and properly implement the flags.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:03 -07:00
Ivo van Doorn 12dadb9009 [PATCH] rt2x00: Correctly identify rt2561turbo
Apparently rt2561s actually has PCI ID 0x0301
and rt2561 actually has PCI ID 0x0302.
Where rt2561s supports Turbo.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:03 -07:00
Ivo van Doorn e9136550eb [PATCH] rt2x00: Increase rt2x00usb_vendor_request timeout.
By increasing the timeout for rt2x00usb_vendor_request,
we should limit the number of loops required to send
a signal to the device succefully.
500ms timeout is specified by the Ralink legacy drivers
for rt2500usb. For rt73usb 1000ms is specified, but that
includes the timeout for the firmware which is already
specified in a different define.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:02 -07:00
Ivo van Doorn 2484591049 [PATCH] rt2x00: Make *_beacon_update static
Make rt61pci_beacon_update and rt73usb_beacon_update static,
they are only used inside their own source file and then only
for setting it as callback funtion for mac80211.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:02 -07:00
Ivo van Doorn 725d99d466 [PATCH] rt2x00: Correct error in calculating rssi for link tuner
The call to rt2x00lib_precalculate_link_signal resets link.rx_success
which is needed when calculating the average rssi for the link
tuner. Change the call order so the link tuner runs first as it
doesn't need the result of the precalculate.

Signed-off-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:01 -07:00
Johannes Berg ea49c359f3 [PATCH] mac80211: remove crypto algorithm typedef
The typedef is not required, we can just use "enum ieee80211_key_alg"
instead of "ieee80211_key_alg"

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:53:00 -07:00
Johannes Berg 4150c57212 [PATCH] mac80211: revamp interface and filter configuration
Drivers are currently supposed to keep track of monitor
interfaces if they allow so-called "hard" monitor, and
they are also supposed to keep track of multicast etc.

This patch changes that, replaces the set_multicast_list()
callback with a new configure_filter() callback that takes
filter flags (FIF_*) instead of interface flags (IFF_*).
For a driver, this means it should open the filter as much
as necessary to get all frames requested by the filter flags.
Accordingly, the filter flags are named "positively", e.g.
FIF_ALLMULTI.

Multicast filtering is a bit special in that drivers that
have no multicast address filters need to allow multicast
frames through when either the FIF_ALLMULTI flag is set or
when the mc_count value is positive.

At the same time, drivers are no longer notified about
monitor interfaces at all, this means they now need to
implement the start() and stop() callbacks and the new
change_filter_flags() callback. Also, the start()/stop()
ordering changed, start() is now called *before* any
add_interface() as it really should be, and stop() after
any remove_interface().

The patch also changes the behaviour of setting the bssid
to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING
is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed
and the filter flag FIF_BCN_PRBRESP_PROMISC introduced.
This is a lot more efficient for hardware like b43 that
supports it and other hardware can still set the BSSID
to all-ones.

Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu
(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and
Ivo van Doorn (rt2x00).

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:52:57 -07:00
Stephen Hemminger 3b04ddde02 [NET]: Move hardware header operations out of netdevice.
Since hardware header operations are part of the protocol class
not the device instance, make them into a separate object and
save memory.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:52 -07:00
Stephen Hemminger b95cce3576 [NET]: Wrap hard_header_parse
Wrap the hard_header_parse function to simplify next step of
header_ops conversion.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:51 -07:00
Vladimir Davydov ac630c2b19 [LIBERTAS]: fix oops on the blackfin architecture
Fixing memory alignment problems on the blackfin architecture (maybe on the
ARM also)

Signed-off-by: Vladimir Davydov <vladimir.davydov@promwad.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:28 -07:00
Vladimir Davydov f31ce76b78 [LIBERTAS]: fix oops on the blackfin architecture
Reserve two bytes to align pointer to the IP header.

Signed-off-by: Vladimir Davydov <vladimir.davydov@promwad.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:27 -07:00
Ryan Mallon 28de0b36be [LIBERTAS]: fix interrupts in CF driver
The following patch fixes the tx transmit timeout problem, which is
caused by the interrupts being incorrectly check and masked. The patch
moves the interrupt masking code so that interrupts are enabled only
when the driver is registered and only disabled when the driver is
unregistered.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:27 -07:00
Ryan Mallon 6f05cbe588 [LIBERTAS]: set dnld_sent correctly for CF parts
Corrects a minor bug with priv->dnld_sent being set incorrectly in
if_cs_host_to_card.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:26 -07:00
Larry Finger 1065de1562 [B43LEGACY]: Change the hardware radio enable logic and cleanup code
This change cleans up the radio-related messages in several ways.

(1) The state of the rfkill switch is assumed to be on, rather than
    tested. Now, any user without such a switch will not see any
    messages. For devices with such a switch, a message will be
    logged only if the initial state is off, or if the switch is toggled.
(2) The routine for testing the switch state is no longer inline.
(3) The LED handling routine is simplified.
(4) The "Radio turned off" message that has confused some users has been
    changed to "Radio initialized".

This patch is patterned after a similar change to b43 by Michael Buesch.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:25 -07:00
Larry Finger 42a9174f54 [B43LEGACY]: Support for turning the radio off from software.
This adds support for turning the radio off in software.
That's useful in environments, where you don't want the RF
to radiate any signals, but don't want to bring the interface down.

This patch is based on a similar patch of b43 by Michael Buesch.

Signed-off-by: Larry Finger <larry.finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:25 -07:00
Michael Buesch fda9abcf1a [B43]: Support for turning the radio off from software.
This adds support for turning the radio off in software.
That's useful in environments, where you don't want the RF
to radiate any signals, but don't want to bring the interface down.

Cc: Larry Finger <larry.finger@lwfinger.net>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:24 -07:00
Michael Buesch 6a724d68a3 [B43]: Remove the "radio hw enabled" message on startup.
This message is useless. Only report state changes.

Cc: Larry Finger <larry.finger@lwfinger.net>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:24 -07:00
Michael Buesch 05155c83d1 [B43]: Change loglevel of radio-enable message.
Also cleanup the code a bit and remove the inline.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:21 -07:00
Michael Buesch b85b3b7af5 [B43]: Don't lock irq_lock in debugfs txpower adjust
It's not required and the txpower adjustment must not be in atomic.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:20 -07:00
Andrew Morton 90f4dd0f4b [P54PCI]: terminate pci table
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:19 -07:00
Ulrich Kunitz ababda03e1 [ZD1211RD]: add USB id for Telegent TG54USB WLAN adapter
Reinhard Speyerer reported at 2007-08-10 a new device.

Here are the information strings.

Product: Telegent TG54USB WLAN Adapter
USB ID: 129b:1666
Chip ID: zd1211 chip 129b:1666 v4330 high 00-01-36 RF2959_RF pa0 -----
FCC ID: N89-UW620Z

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:18 -07:00
Larry Finger 01449c5a46 [BCM43XX]: Change radio hardware switch status printk from debug to regular
Some distros ship bcm43xx with debugging printout disabled. For those
BCM43xx devices with radio on/off switches, this makes it impossible
to know if the radio is on or off. This patch changes a pair of debug
printk's into ordinary printk's. It also changes the message that
prints when the radio is initialized to the off state as the old message
seems to confuse users.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:18 -07:00
Jesper Juhl fa46081c50 [ZD1211RW]: Don't needlessly initialize variable to NULL in zd_chip
No need to initialize to NULL when variable is never used before
it's assigned the return value of a kmalloc() call.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:17 -07:00
Zhu Yi 1156b2c689 [IWLWIFI]: remove per-file CFLAGS for IWL define
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:16 -07:00
Michael Buesch 1a09404a23 [B43]: Fix sparse warnings.
The remaining warning in phy.c will be fixed later.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:07 -07:00
Jeff Garzik b9f2c0440d [netdrvr] Stop using legacy hooks ->self_test_count, ->get_stats_count
These have been superceded by the new ->get_sset_count() hook.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:45 -07:00
Michael Wu eff1a59c48 [P54]: add mac80211-based driver for prism54 softmac hardware
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:42 -07:00
Joe Perches 0795af5729 [NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()
This is nicer than the MAC_FMT stuff.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:42 -07:00
Ivo van Doorn 95ea36275f [RT2x00]: add driver for Ralink wireless hardware
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:39 -07:00
Zhu Yi b481de9ca0 [IWLWIFI]: add iwlwifi wireless drivers
This patch adds the mac80211 based wireless drivers for the Intel
PRO/Wireless 3945ABG/BG Network Connection and Intel Wireless WiFi
Link AGN (4965) adapters.

[ Move driver into it's own directory -DaveM ]

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:39 -07:00
Larry Finger 75388acd0c [B43LEGACY]: add mac80211-based driver for legacy BCM43xx devices
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:38 -07:00
Michael Buesch e4d6b79518 [B43]: add mac80211-based driver for modern BCM43xx devices
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:37 -07:00
Denis Cheng ff8ac60948 drivers/net/: all drivers/net/ cleanup with ARRAY_SIZE
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:51:15 -07:00
Ralf Baechle 10d024c1b2 [NET]: Nuke SET_MODULE_OWNER macro.
It's been a useless no-op for long enough in 2.6 so I figured it's time to
remove it.  The number of people that could object because they're
maintaining unified 2.4 and 2.6 drivers is probably rather small.

[ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ]

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:13 -07:00
John W. Linville cbdb9e43d1 [PATCH] libertas: remove unused adhoc_rates_b definition
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:39 -07:00
Andrew Morton 4ecd41bd0f [PATCH] libertas: printk warning fixes
drivers/net/wireless/libertas/if_cs.c: In function 'if_cs_prog_helper':
drivers/net/wireless/libertas/if_cs.c:462: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
drivers/net/wireless/libertas/if_cs.c: In function 'if_cs_prog_real':
drivers/net/wireless/libertas/if_cs.c:538: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:38 -07:00
Jesper Juhl 655b4d16ac [PATCH] net: Kill some unneeded allocation return value casts in libertas
kmalloc() and friends return void*, no need to cast it.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:37 -07:00
Brajesh Dave 4b04f19625 [PATCH] libertas: advertise 11g ad-hoc rates
Advertise support for 802.11g bitrates when starting adhoc
networks, not just 802.11b bitrates.

Signed-off-by: Brajesh Dave <brajeshd@marvell.com>
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:37 -07:00
Marek Vašut 70500f5443 [PATCH] libertas: region code values specified as 8bit
This patch strips away possible mess in regioncode (eg. on my card - 88W8305
chipset - I get 0x3031 instead of expected 0x0031 and as a result the driver
defaults to USA region which is obviously incorrect). Following patch fixes
the issue.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:36 -07:00
Pierre Ossman 794760f750 [PATCH] libertas: properly end commands on hardware failure
Make sure that errors reported by the hardware layer is properly
handled. Otherwise commands tend to get stuck in limbo.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:36 -07:00
Dan Williams b6e99dd6e2 [PATCH] libertas: send reset command directly instead of calling libertas_reset_device
Ensures that any platform specific code that might live in libertas_reset_device
(for example, OLPC tells the EC to do a GPIO-toggled reset of the wireless
from libertas_reset_device) isn't called.  Could be handled better by
interface-specific callbacks and a flag for "other hardware reset".

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Marcelo Tosatti <marcelo@kvack.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:35 -07:00
Dan Williams 64f104e89b [PATCH] libertas: don't stomp on interface-specific private data
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:34 -07:00
Dan Williams 954ee164f4 [PATCH] libertas: reorganize and simplify init sequence
This patch moves all firmware load responsibility into the interface-specific
code and gets rid of the firmware pointer in the generic card structure.  It
also removes 3 fairly unecessary callbacks: hw_register_dev, hw_unregister_dev,
and hw_prog_firmware.  It also makes the init sequence from interface
probe functions more logical, as there are paired add/remove and start/stop
calls into generic libertas code.

Because the USB driver code uses the same TX URB callback for both firmware
upload (where the generic libertas structure isn't initialized yet) and for
normal operation (where it is), some bits of USB code have to deal with
'priv' being NULL.  All USB firmware upload bits have been changed to not
require 'priv' at all, but simply the USB card structure.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:34 -07:00
Dan Williams b1b1907dce [PATCH] libertas: fix inadvertant removal of bits from commit 8314418629
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:33 -07:00
Mariusz Kozlowski 7563a0b4b5 [PATCH] drivers/net/wireless/wl3501_cs.c: remove redundant memset
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:33 -07:00
Daniel Drake 475fed1e22 [PATCH] zd1211rw: Add ID for ZyXEL M-202 XtremeMIMO
Tested by Nathen Meyers
FCC ID: SI5WUB221Z
zd1211b chip 0586:340a v4810 high 00-13-49 AL2230_RF pa0 ----S

Despite the product name, I'm pretty sure this isn't a MIMO device. It
appears just to be a normal ZD1211B and we have never heard of these
devices having more than 1 RF. I guess they named this product this way
to make it appear that it fits in with the rest of their XtremeMIMO
product range.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:32 -07:00
Ulrich Kunitz 64f222cce2 [PATCH] zd1211rw: consistent handling of ZD1211 specific rates
As pointed out by Daniel Drake, the zd1211rw driver used several
different rate values and names throughout the driver. He has
written a patch to change it and tweaked it after some pretty wild
ideas from my side. But the discussion helped me to understand the
problem better and I think I have nailed it down with this patch.

A zd-rate will consist from now on of a four-bit "pure" rate value
and a modulation type flag as used in the ZD1211 control set used
for packet transmission. This is consistent with the usage in the
zd_rates table. If possible these zd-rates should be used in the
code.

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:32 -07:00
Daniel Drake 8e97afe569 [PATCH] zd1211rw: Add ID for Sitecom WL-162
Tested by Giuseppe Lippolis
zd1211b chip 0cde:001a v4810 high 00-60-b3 AL2230_RF pa0 g--NS

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:31 -07:00
Ulrich Kunitz ffe143741f [PATCH] zd1211rw: removed noisy debug messages
While developing the driver we added a lot of debug messages for
setting hardware registers. These messages make the reading of the
log files difficult and are of no use anymore. This patch removes
those messages in zd_chip.c.

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:30 -07:00
Jesper Juhl bf1e9a080d Clean up duplicate includes in drivers/net/
This patch cleans up duplicate includes in
	 drivers/net/

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:50:26 -07:00
Dan Williams 7856a541ad [PATCH] libertas: bump driver version
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:18 -07:00
Dan Williams 8362cd413e [PATCH] libertas: fix sparse-reported problems
A few fields being converted to the wrong sized type, and a few missed
endian conversions.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:17 -07:00
Dan Williams c7fdf26995 [PATCH] libertas: better descriptions for association errors
Describe the association response status code the firmware
returns, based on mail to libertas-dev from Ronak.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:17 -07:00
Dan Williams 5612c0140a [PATCH] libertas: ignore spurious mesh autostart events
Don't trust the firmware to always send them at the right time,
ignore them when the driver thinks mesh autostart is disabled.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:16 -07:00
Dan Williams 81173e34d4 [PATCH] libertas: fix misspelling in debug message
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:15 -07:00
Luis Carlos Cobo 63f0023bc3 [PATCH] libertas: pass boot2 version to firmware
Boot2 version used to be hardcoded in the uploaded firmware,
this patch preserves the boot2 version before uploading firmware
and sends it to the firmware again on resume.

Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:15 -07:00
Dan Williams 2afc0c5d71 [PATCH] libertas: push WEXT scan requests to a work queue
Push WEXT scan requests to a workqueue and have each partial scan queue
the next part, then only report results when the complete scan has finished.
Full scans don't go through the work queue.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:14 -07:00
Eugene Teo b031ac1026 [PATCH] drivers/net/wireless/libertas/cmd.c: fix adapter->driver_lock dereference
adapter is NULL if cmdnode is not.

Signed-off-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:14 -07:00
Dan Williams 5707708111 [PATCH] libertas: fix assignment of WEP key type
keytype is a u8

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:13 -07:00
Luis Carlos Cobo 965f8bbc6c [PATCH] libertas: monitor mode support for OLPC firmware
Driver support for the monitor mode support that will be available in the next
OLPC 'bleeding edge' Marvell firmware release (most likely, 5.110.16.p2).

To activate monitor mode,

echo mode > /sys/class/net/{ethX,mshX}/device/libertas_rtap

where mode is the hex mask that specifies which frames to sniff (in short, 0x1
for data, 0x2 for all management but beacons, 0x4 for beacons). Any non zero
mode will activate the monitor mode, inhibiting transmission in ethX and mshX
interfaces and routing all the incoming traffic to a new rtapX interface that
will output the packets in 802.11+radiotap headers format.

Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:13 -07:00
Jean Tourrilhes 9483f03150 [PATCH] libertas: fix a few wext abuses...
o SIOCGIWNAME is not designed to return the version number of the driver.
On the other hand, you are free to abuse SIOCGIWNICKN for that purpose.

o Don't attempt to fix the WE19/WE20 transition in the driver, because
your fixes are bogus, and redundant with the code in the kernel (you may
endup with +2, you can't read 32 char ESSID...).

o In SIOCSIWTXPOW, if you specified in iwrange that you want dBm, you
should only get dBm, which allow to reduce code bloat.

Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:12 -07:00
Luis Carlos Cobo d21b31fd53 [PATCH] libertas: keep mesh autostart enabled while asleep
After loading the firmware, mesh autostart will be disabled. After that, the
user will still be able to enable or disable it at will. On suspend, it will be
always activated and later on resume it will go back to the state it had before
going to sleep.

Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:11 -07:00
Luis Carlos Cobo b37e5842f5 [PATCH] libertas: revert CAPINFO_MASK to its original value
CAPINFO_MASK changed on commits 981f187b and a091095b. Reverting to the original
value.  Also move CAPINFO_MASK into the sole user, join.c.  CAPINFO_MASK
should be in host CPU byte order; capability is converted to device
byte order elsewhere.

This fixes OLPC ticket #2161

Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:11 -07:00
Dan Williams 00af0157e0 [PATCH] libertas: push mesh beacon bit to userspace in scan results
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:10 -07:00
Dan Williams 0edef215e4 [PATCH] libertas: send association events on adhoc reassociation
Send association event to userspace when reassociating to the same
ad-hoc network, because it's still an association.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:10 -07:00
Holger Schurig 9556d2120c [PATCH] libertas: fix two debug statements in cmdresp.c
Purely cosmetic: this moves an lbs_deb_enter() to the proper place
and changes an erraneous lbs_deb_enter_args() into lbs_deb_leave_args()

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:09 -07:00
Holger Schurig bee093d613 [PATCH] libertas: remove bss_descriptor->timestamp
Noone used this variable.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:09 -07:00
Holger Schurig a2235ed402 [PATCH] libertas: remove bss_descriptior->networktsf
This value was parsed out, but then nowhere used ... except in
some debugfs output. I can't imagine anyone wanting to use this
value for anything real (as no other driver exports it), so
bye-bye.

Along this, made the columns of
/sys/kernel/debug/libertas_wireless/*/getscantable align again.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:08 -07:00
Holger Schurig 4f2fdaaf0e [PATCH] libertas: remove adapter->scantype
scantype was initialized with CMD_SCAN_TYPE_ACTIVE, but there is no code
that would ever change it, so we can use that variable directly.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:08 -07:00
Holger Schurig d65ead886a [PATCH] libertas: remove adapter->scanmode
scanmode was initialized with CMD_BSS_TYPE_ANY, but there is no code
that ever can store another value there, so it can go away.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:07 -07:00
Holger Schurig 2c85103da3 [PATCH] libertas: remove adapter->beaconperiod
beaconperiod was initialized with MRVDRV_BEACON_INTERVAL, but there is
no code that would ever change it's value. We can use the define directly.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:06 -07:00
Holger Schurig 85c93e5189 [PATCH] libertas: remove adapter->adhoc_grate_enabled
The variable was initialized with 0 (false). There is no code that would
ever change it, so we can use the false-patch directly.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:06 -07:00
Holger Schurig 0aabc0a5d5 [PATCH] libertas: remove adapter->listeninterval
listeninterval was initialized with MRVDRV_DEFAULT_LISTEN_INTERVAL, but
there exists that would ever change it. So we can use this define directly.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:05 -07:00
Holger Schurig 956deb867a [PATCH] libertas: remove adapter->regiontableindex
The value was computed, but then never used.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:05 -07:00
Holger Schurig ae596ce2f7 [PATCH] libertas: remove adapter->atimwindow
This varaible was initialized with 0 but there is no code that would ever
change it's value. So it can go away.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:04 -07:00
Holger Schurig 56c4656e84 [PATCH] libertas: remove adapter->multipledtim
multipledtim was initialized with MRVDRV_DEFAULT_MULTIPLE_DTIM and then
kept at that value, so we could use that define directly.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:03 -07:00
Holger Schurig 252cf0d10f [PATCH] libertas: remove adapter->locallisteninterval
locallisteninterval was initialized with 0, but there is no code that
changes it, rendering it rather useless.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:03 -07:00
Holger Schurig 97605c3eb3 [PATCH] libertas: remove adapter->nullpktinterval
No code ever initialized this variable, so it was 0 because of kzalloc().
But no other code changes it, making it rather useless.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:02 -07:00
Holger Schurig a783f1ee5b [PATCH] libertas: remove adapter->{data,bcn}_avg_factor
Those two variables were initialized with some default values, but there
is no code that would ever change them. So we could use as well the defaults
directly.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:02 -07:00
Holger Schurig caef47a0dc [PATCH] libertas: remove adapter->rxpd_rate
No code uses the contents of this variable, so it can go.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:01 -07:00
Holger Schurig cad9d9b17a [PATCH] libertas: remove adapter->txrate
The value of txrate was only set by a CMD_802_11_TX_RATE_QUERY command,
but there was no code in the driver that ever issued this command.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:01 -07:00
Dan Williams b20c520763 [PATCH] libertas: fix WEXT quality reporting
Found by Ronak and others at Marvell.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:50:00 -07:00
Holger Schurig fcff0e0856 [PATCH] libertas: remove adapter->pkttxctrl
The variable was initialized to 0 and nowhere else changed, so basically
the per-packet TX control wasn't used.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:59 -07:00
Holger Schurig e2aa334bee [PATCH] libertas: remove adapter->scanprobes
The variable was initialized to 0 and nowhere else to anything
different.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:59 -07:00
Holger Schurig 6e22a855b2 [PATCH] libertas: remove adapter->prescan
The value 1 was assigned to it and there was nowhere any code
that would have changed that to 0.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:58 -07:00
Holger Schurig fdde7084e0 [PATCH] libertas: remove adapter->{rx,tx}antenna
There was nowhere any code that used the values of those
variables.

This patch also removes two static functions that are now unused.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:57 -07:00
Holger Schurig 4d4ce1ad02 [PATCH] libertas: remove unused adapter->prev_XXXX variables
There were just used in some debug output, but nowhere else.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:56 -07:00
Holger Schurig 27590d06e1 [PATCH] add support for Marvell 8385 CF cards
This patch adds support for Marvell based 8385 compact flash cards.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:56 -07:00
Luis Carlos Cobo 9cdc6d295b [PATCH] libertas: Avoid MESH_AUTOSTARTED spam on console
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:55 -07:00
Holger Schurig 8ff12da121 [PATCH] libertas: use LBS_DEB_HOST for host-to-card communications
... and LBS_DEB_CMD for command execution. Also tidies misc
comments to give a consistent output.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:55 -07:00
Holger Schurig a6c8700f36 [PATCH] libertas: use LBS_DEB_HOST for host-to-card communications
... and LBS_DEB_CMD for command execution. Also tidies misc
comments to give a consistent output.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:54 -07:00
Holger Schurig 6b63cd0f42 [PATCH] libertas: remove a hundred CMD_RET_xxx definitions
types.h contains the same amount of CMD_RET_xxx and CMD_xxx definitions.
They contains the same info: the firmware command opcode and, when the
firmware sends back a result, the command opcode ORed with 0x8000.

Having the same data twice in the source code is redundant and can lead to
errors (e.g. if you update or delete only one instance). This patch removed
all CMD_RET_xxx definitions and introduces a simple CMD_RET() macro.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:53 -07:00
Holger Schurig ece5619193 [PATCH] libertas: make the hex dumper nicer
Currently, when you define LBS_DEB_HEX, you get every hex dump in the
whole driver, e.g. for LBS_DEB_CMD, LBS_DEB_RX, LBS_DEB_TX etc. This
patch makes sure that you only get the hexdump that you're interested in.

Renamed lbs_dbg_hex() into lbs_deb_hex(), like the other lbs_deb_XXX()
macros.

Made lbs_deb_hex() issue a line feed (and a new prompt) after 16 bytes.

As lbs_deb_hex() now prints the ":" after the prompt by itself, removed
the misc colons in the various *.c files.

lbs_deb_XXX() now print the debug category as well.

As lbs_deb_XXX() --- and especially lbs_deb_11d() --- now print the
category, I removed various "11D:" prefixes in 11d.c as well.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:53 -07:00
Luis Carlos Cobo a9f38d023b [PATCH] Support for mesh autostart deactivation through sysfs
echo 0 > /sys/class/net/mshX/autostart_enabled

This is supported from Marvell firmware version 5.110.16.p0 (to be released).

Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:52 -07:00
Holger Schurig f455eb1a4b [PATCH] libertas: remove debugmode
There is nowhere any place that set's this variable.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:52 -07:00
Holger Schurig 0a6d0555e9 [PATCH] libertas: tune hardware info output
This changes the output of hardware related info from:

libertas: GET_HW_SPEC: FWReleaseVersion- 5.0.11.p0
libertas: GET_HW_SPEC: Permanent addr-  0:16:41:72:f6:a8
libertas: GET_HW_SPEC: hwifversion=0x2  version=0x213

to:

libertas: GET_HW_SPEC: FWReleaseVersion: 5.0.11.p0
libertas: GET_HW_SPEC: Permanent addr: 00:16:41:72:f6:a8
libertas: GET_HW_SPEC: hwifversion: 0x2, version: 0x213

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:51 -07:00
Holger Schurig 3cf840914b [PATCH] libertas: access mesh_dev more carefully
The CF/SDIO firmware doesn't support Mesh, so priv->mesh_dev is
NULL there. Protect all accesses.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:50 -07:00
Holger Schurig c95c7f930e [PATCH] libertas: uppercase some #defines
Usually constants defined by #define are in ALL_UPPERCASE. This patch
fixes this.

I also shuffled the bits around so that they match the bit positions in the
host-interrupt-state register of the CF/SDIO card :-)

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:50 -07:00
Holger Schurig ac558ca2ae [PATCH] libertas: make more functions static & remove unused functions
Some functions where declared in header files, but used only once. They are
now static functions.

After doing this, I found out that some functions weren't used at all. I
removed this dead code.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:49 -07:00
Holger Schurig c23a24f6ae [PATCH] libertas: fix one more sparse warning
adhoc_rates_b is only used locally, so make it static

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:49 -07:00
Holger Schurig 1df4e8fe91 [PATCH] libertas: remove fw.c
Firmware download is quite different for different hardware. The SDIO and CF
cards have two flat files that need to be downloaded, whereas the USB driver
needs only one file, but with an internal structure.

The code that handles this (USB only) structured file is currently in fw.c.
This patch moves this code into if_usb.c. The remaining functions in fw.c
have not much to do with firmware, they are various card- and network-stack
initialisation functions. I've moved them into main.c.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:48 -07:00
Dan Williams 8c51276575 [PATCH] libertas: simplify and clean up data rate handling
Remove unused/duplicated fields and consolidate static data rate arrays,
for example the libertas_supported_rates[] and datarates[] arrays in
the bss_descriptor structure, and the libertas_supported_rates field
in the wlan_adapter structure.

Introduce libertas_fw_index_to_data_rate and libertas_data_rate_to_fw_index
functions and use them everywhere firmware requires a rate index rather
than a rate array.

The firmware requires the 4 basic rates to have the MSB set, but most
other stuff doesn't, like WEXT and mesh ioctls.  Therefore, only set the MSB
on basic rates when pushing rate arrays to firmware instead of doing a ton
of (rate & 0x7f) everywhere.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:48 -07:00
Dan Williams e52414728b [PATCH] libertas: wlan_ -> libertas_ function prefix renames for main.c
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:47 -07:00
Dan Williams eedc2a3191 [PATCH] libertas: move generic firmware reset command to common code
It's not USB specific, so move it out of the USB interface code.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:46 -07:00
Dan Williams ffcae953ac [PATCH] libertas: fix more mixed-case abuse
Mistakently introduced by a previous patch to upper-case all command
constants.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:46 -07:00
Dan Williams 125dcabf72 [PATCH] libertas: bump version to 322.p1
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:45 -07:00
Dan Williams 276c015e1b [PATCH] libertas: new mesh control knobs
Support for new mesh control knobs on firmware 5.220.11.p4:

Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:45 -07:00
Dan Williams fe3361507a [PATCH] libertas: remove thread.h and make kthread usage clearer
Remove the thread.h abstractions and opencode kthread stuff
to make it clearer.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:44 -07:00
Dan Williams 2ca10e6d6a [PATCH] libertas: fix debug build breakage due to field rename
Missed when fixing mixed-case structure field names.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:44 -07:00
Dan Williams 0aef64d758 [PATCH] libertas: re-uppercase command defines and other constants
For readability.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:43 -07:00
Dan Williams b44898eb2c [PATCH] libertas: fix mixed-case abuse in cmd_ds_802_11_ad_hoc_start
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:42 -07:00
Dan Williams ea8da92d70 [PATCH] libertas: fix mixed-case abuse in cmd_ds_802_11_ad_hoc_result
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:42 -07:00
Dan Williams 492b6da7d2 [PATCH] libertas: fix mixed-case abuse in cmd_ds_802_11_scan
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:41 -07:00
Dan Williams 9e22cb67d9 [PATCH] libertas: remove if_bootcmd.c
Move the only function in it to if_usb.c, which was its
only user anyway.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:41 -07:00
Luis Carlos Cobo 1e838bf31c [PATCH] libertas: specific mesh scan for mshX interface
With this patch, scanning with mshX interface will only return mesh networks. To
differentiate them, a specific mesh IE in beacons/probe responses is used. This
IE has been introduced in firmware release 5.110.14. Note:

Even though there can be at most a single mesh per channel, this scan might
return several networks in the same channel.

If all nodes in a mesh network are associated to an AP, they won't produce
beacons/probe responses, thus the network will not be listed. This will be fixed
in future firmware releases.

Scan on ethX interface is not filtered, so it will list both mesh and non-mesh
networks.

Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:40 -07:00
Dan Williams ab6179711a [PATCH] libertas: clean up 802.11 IE post-scan handling
Remove struct IE_WPA and just use direct checking of the IE
bytes like ipw.  Remove WLAN_802_11_VARIABLE_IEs because
it's unused.

Kill ieeetypes_elementid enum and just use MFIE_* from
ieee80211.h.  Also use struct ieee80211_info_element for
scan buffer processing to simplify pointer usage.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:39 -07:00
Dan Williams 2950cd2630 [PATCH] libertas: clean up indentation in libertas_association_worker
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:39 -07:00
Dan Williams 1443b6530d [PATCH] libertas: rename WLAN_802_11_KEY to enc_key and clean up usage
It doesn't touch hardware and therefore doesn't need endian notations
either.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:38 -07:00
Dan Williams 0c9ca690e0 [PATCH] libertas: kill ieeetypes_capinfo bitfield, use ieee80211.h types
Use standard BSS capability field constants from ieee80211.h.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:38 -07:00
Yoann Padioleau 6dbc9c89fb [PATCH] dev->priv to netdev_priv(dev), for drivers/net/wireless
Replacing accesses to dev->priv to netdev_priv(dev). The replacment
is safe when netdev_priv is used to access a private structure that is
right next to the net_device structure in memory. Cf
http://groups.google.com/group/comp.os.linux.development.system/browse_thread/thread/de19321bcd94dbb8/0d74a4adcd6177bd
This is the case when the net_device structure was allocated with
a call to alloc_netdev or one of its derivative.

Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Cc: mcgrof@gmail.com
Cc: linux-wireless@vger.kernel.org
Cc: akpm@linux-foundation.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:37 -07:00
Mariusz Kozlowski 8951554dba [PATCH] drivers/net/wireless/prism54/oid_mgt.c: kmalloc + memset conversion to kzalloc
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Acked-by: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:36 -07:00
Matthias Kaehlcke 3623060abb [PATCH] Use mutex instead of semaphore in the Host AP driver
The Host AP driver uses a semaphore as mutex. Use the mutex API
instead of the (binary) semaphore.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Acked-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:36 -07:00
Bill Nottingham d73ae55ad4 [PATCH] remove gratuitous space in airo module description
Currently the modinfo looks like:

description:    Support for Cisco/Aironet 802.11 wireless ethernet                    cards.  Direct support for ISA/PCI/MPI cards and support               for PCMCIA when used with airo_cs.

Arguably, it should be cut at the end of the first sentence.
This at least makes it somewhat more legible.

Signed-off-by: Bill Nottingham <notting@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:49:35 -07:00