When someone writes to an inode, readers accessing the same inode via
ocfs2_readpage() just busyloop trying to get ip_alloc_sem because
do_generic_file_read() looks up the page again and retries ->readpage()
when previous attempt failed with AOP_TRUNCATED_PAGE. When there are enough
readers, they can occupy all CPUs and in non-preempt kernel the system is
deadlocked because writer holding ip_alloc_sem is never run to release the
semaphore. Fix the problem by making reader block on ip_alloc_sem to break
the busy loop.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Fix a corruption that can happen when we have (two or more) outstanding
aio's to an overlapping unaligned region. Ext4
(e9e3bcecf4) and xfs recently had to fix
similar issues.
In our case what happens is that we can have an outstanding aio on a region
and if a write comes in with some bytes overlapping the original aio we may
decide to read that region into a page before continuing (typically because
of buffered-io fallback). Since we have no ordering guarantees with the
aio, we can read stale or bad data into the page and then write it back out.
If the i/o is page and block aligned, then we avoid this issue as there
won't be any need to read data from disk.
I took the same approach as Eric in the ext4 patch and introduced some
serialization of unaligned async direct i/o. I don't expect this to have an
effect on the most common cases of AIO. Unaligned aio will be slower
though, but that's far more acceptable than data corruption.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
ocfs2 implements its own llseek() to provide the SEEK_HOLE/SEEK_DATA
functionality.
SEEK_HOLE sets the file pointer to the start of either a hole or an unwritten
(preallocated) extent, that is greater than or equal to the supplied offset.
SEEK_DATA sets the file pointer to the start of an allocated extent (not
unwritten) that is greater than or equal to the supplied offset.
If the supplied offset is on a desired region, then the file pointer is set
to it. Offsets greater than or equal to the file size return -ENXIO.
Unwritten (preallocated) extents are considered holes because the file system
treats reads to such regions in the same way as it does to holes.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
fs: Merge split strings
treewide: fix potentially dangerous trailing ';' in #defined values/expressions
uwb: Fix misspelling of neighbourhood in comment
net, netfilter: Remove redundant goto in ebt_ulog_packet
trivial: don't touch files that are removed in the staging tree
lib/vsprintf: replace link to Draft by final RFC number
doc: Kconfig: `to be' -> `be'
doc: Kconfig: Typo: square -> squared
doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
drivers/net: static should be at beginning of declaration
drivers/media: static should be at beginning of declaration
drivers/i2c: static should be at beginning of declaration
XTENSA: static should be at beginning of declaration
SH: static should be at beginning of declaration
MIPS: static should be at beginning of declaration
ARM: static should be at beginning of declaration
rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
Update my e-mail address
PCIe ASPM: forcedly -> forcibly
gma500: push through device driver tree
...
Fix up trivial conflicts:
- arch/arm/mach-ep93xx/dma-m2p.c (deleted)
- drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
- drivers/net/r8169.c (just context changes)
Replace the ->check_acl method with a ->get_acl method that simply reads an
ACL from disk after having a cache miss. This means we can replace the ACL
checking boilerplate code with a single implementation in namei.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
new helper: posix_acl_create(&acl, gfp, mode_p). Replaces acl with
modified clone, on failure releases acl and replaces with NULL.
Returns 0 or -ve on error. All callers of posix_acl_create_masq()
switched.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
new helper: posix_acl_chmod(&acl, gfp, mode). Replaces acl with modified
clone or with NULL if that has failed; returns 0 or -ve on error. All
callers of posix_acl_chmod_masq() switched to that - they'd been doing
exactly the same thing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This moves logic for checking the cached ACL values from low-level
filesystems into generic code. The end result is a streamlined ACL
check that doesn't need to load the inode->i_op->check_acl pointer at
all for the common cached case.
The filesystems also don't need to check for a non-blocking RCU walk
case in their acl_check() functions, because that is all handled at a
VFS layer.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch address two shortcomings in ocfs2_page_mkwrite():
1. Makes the function return better VM_FAULT_* errors.
2. It handles a error that is triggered when a page is dropped from the mapping
due to memory pressure. This patch locks the page to prevent that.
[Patch was cleaned up by Sunil Mushran.]
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
The cluster up check only checks to see if the node is heartbeating or not.
If yes it continues assuming that the node is connected to all the nodes. But
if that is not the case, the cluster join aborts with a stack of errors that
are not easy to comprehend.
This patch adds the network connect check upfront and prints the nodes that
the node is not yet connected to, before aborting.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Patch adds function o2net_fill_node_map() to return the bitmap of nodes that
it is connected to. This bitmap is also accessible by the user via the debugfs
file, /sys/kernel/debug/o2net/connected_nodes.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
The o2hb debugfs file, elapsed_time_in_ms, should return values only after the
timer is armed atleast once.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
In dlmlock_remote(), we wait for the resource to stop being active before
setting the inprogress flag. Active includes recovery, migration, etc.
The problem here is that if the resource was being recovered or migrated, the
new owner could very well be that node itself (and thus not a remote node).
This problem was observed in Oracle bug#12583620. The error messages observed
were as follows:
dlm_send_remote_lock_request:337 ERROR: Error -40 (ELOOP) when sending message 503 (key 0xd6d8c7) to node 2
dlmlock_remote:271 ERROR: dlm status = DLM_BADARGS
dlmlock:751 ERROR: dlm status = DLM_BADARGS
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
The inflight reference count, in the lock resource, is taken to pin the resource
in memory. We take it when a new resource is created and release it after a
lock is attached to it. We do this to prevent the resource from getting purged
prematurely.
Earlier this reference count was being taken for locally mastered resources
only. This patch extends the same functionality for remotely mastered ones.
We are doing this because the same premature purging could occur for remotely
mastered resources if the remote node were to die before completion of the
create lock.
Fix for Oracle bug#12405575.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Currently if the heartbeat device is hard-ro, the o2hb thread keeps chugging
along and dumping errors along the way. The user needs to manually stop the
heartbeat.
The patch addresses this shortcoming by adding a limit to the number of times
the hb thread will iterate in an unsteady state. If the hb thread does not
ready steady state in that many interation, the start is aborted.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2. For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For filesystems that delay their end_io processing we should keep our
i_dio_count until the the processing is done. Enable this by moving
the inode_dio_done call to the end_io handler if one exist. Note that
the actual move to the workqueue for ext4 and XFS is not done in
this patch yet, but left to the filesystem maintainers. At least
for XFS it's not needed yet either as XFS has an internal equivalent
to i_dio_count.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Maintain i_dio_count for all filesystems, not just those using DIO_LOCKING.
This these filesystems to also protect truncate against direct I/O requests
by using common code. Right now the only non-DIO_LOCKING filesystem that
appears to do so is XFS, which uses an opencoded variant of the i_dio_count
scheme.
Behaviour doesn't change for filesystems never calling inode_dio_wait.
For ext4 behaviour changes when using the dioread_nonlock option, which
previously was missing any protection between truncate and direct I/O reads.
For ocfs2 that handcrafted i_dio_count manipulations are replaced with
the common code now enable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Let filesystems handle waiting for direct I/O requests themselves instead
of doing it beforehand. This means filesystem-specific locks to prevent
new dio referenes from appearing can be held. This is important to allow
generalizing i_dio_count to non-DIO_LOCKING filesystems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
i_alloc_sem is a rather special rw_semaphore. It's the last one that may
be released by a non-owner, and it's write side is always mirrored by
real exclusion. It's intended use it to wait for all pending direct I/O
requests to finish before starting a truncate.
Replace it with a hand-grown construct:
- exclusion for truncates is already guaranteed by i_mutex, so it can
simply fall way
- the reader side is replaced by an i_dio_count member in struct inode
that counts the number of pending direct I/O requests. Truncate can't
proceed as long as it's non-zero
- when i_dio_count reaches non-zero we wake up a pending truncate using
wake_up_bit on a new bit in i_flags
- new references to i_dio_count can't appear while we are waiting for
it to read zero because the direct I/O count always needs i_mutex
(or an equivalent like XFS's i_iolock) for starting a new operation.
This scheme is much simpler, and saves the space of a spinlock_t and a
struct list_head in struct inode (typically 160 bits on a non-debug 64-bit
system).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
combination of kern_path_parent() and lookup_create(). Does *not*
expose struct nameidata to caller. Syscalls converted to that...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
its value depends only on inode and does not change; we might as
well store it in ->i_op->check_acl and be done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch changes the security_inode_init_security API by adding a
filesystem specific callback to write security extended attributes.
This change is in preparation for supporting the initialization of
multiple LSM xattrs and the EVM xattr. Initially the callback function
walks an array of xattrs, writing each xattr separately, but could be
optimized to write multiple xattrs at once.
For existing security_inode_init_security() calls, which have not yet
been converted to use the new callback function, such as those in
reiserfs and ocfs2, this patch defines security_old_inode_init_security().
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Many stupid corrections of duplicated includes based on the output of
scripts/checkincludes.pl.
Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Caching "we have already removed suid/caps" was overenthusiastic as merged.
On network filesystems we might have had suid/caps set on another client,
silently picked by this client on revalidate, all of that *without* clearing
the S_NOSEC flag.
AFAICS, the only reasonably sane way to deal with that is
* new superblock flag; unless set, S_NOSEC is not going to be set.
* local block filesystems set it in their ->mount() (more accurately,
mount_bdev() does, so does btrfs ->mount(), users of mount_bdev() other than
local block ones clear it)
* if any network filesystem (or a cluster one) wants to use S_NOSEC,
it'll need to set MS_NOSEC in sb->s_flags *AND* take care to clear S_NOSEC when
inode attribute changes are picked from other clients.
It's not an earth-shattering hole (anybody that can set suid on another client
will almost certainly be able to write to the file before doing that anyway),
but it's a bug that needs fixing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Using __test_and_{set,clear}_bit_le() with ignoring its return value
can be replaced with __{set,clear}_bit_le().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: ocfs2-devel@oss.oracle.com
Signed-off-by: Joel Becker <jlbec@evilplan.org>
The original code had a null derefence in the error handling.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
"new_phys_cpos" is always a valid pointer here.
ocfs2_probe_alloc_group() allocates "*new_phys_cpos".
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
ocfs2 cannot currently mount a device that is readonly at the media
("hard readonly"). Fix the broken places.
see detail: http://oss.oracle.com/bugzilla/show_bug.cgi?id=1322
[ Description edited -- Joel ]
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Reviewed-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
Ocfs2/move_extents: Validate moving goal after the adjustment.
Ocfs2/move_extents: Avoid doing division in extent moving.
though the goal_to_be_moved will be validated again in following moving, it's
still a good idea to validate it after adjustment at the very beginning, instead
of validating it before adjustment.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
It's not wise enough to do a 64bits division anywhere in kernside, replace it
with a decent helper or proper shifts.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (28 commits)
Ocfs2: Teach local-mounted ocfs2 to handle unwritten_extents correctly.
ocfs2/dlm: Do not migrate resource to a node that is leaving the domain
ocfs2/dlm: Add new dlm message DLM_BEGIN_EXIT_DOMAIN_MSG
Ocfs2/move_extents: Set several trivial constraints for threshold.
Ocfs2/move_extents: Let defrag handle partial extent moving.
Ocfs2/move_extents: move/defrag extents within a certain range.
Ocfs2/move_extents: helper to calculate the defraging length in one run.
Ocfs2/move_extents: move entire/partial extent.
Ocfs2/move_extents: helpers to update the group descriptor and global bitmap inode.
Ocfs2/move_extents: helper to probe a proper region to move in an alloc group.
Ocfs2/move_extents: helper to validate and adjust moving goal.
Ocfs2/move_extents: find the victim alloc group, where the given #blk fits.
Ocfs2/move_extents: defrag a range of extent.
Ocfs2/move_extents: move a range of extent.
Ocfs2/move_extents: lock allocators and reserve metadata blocks and data clusters for extents moving.
Ocfs2/move_extents: Add basic framework and source files for extent moving.
Ocfs2/move_extents: Adding new ioctl code 'OCFS2_IOC_MOVE_EXT' to ocfs2.
Ocfs2/refcounttree: Publicize couple of funcs from refcounttree.c
Ocfs2: Add a new code 'OCFS2_INFO_FREEFRAG' for o2info ioctl.
Ocfs2: Add a new code 'OCFS2_INFO_FREEINODE' for o2info ioctl.
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem:
xen: cleancache shim to Xen Transcendent Memory
ocfs2: add cleancache support
ext4: add cleancache support
btrfs: add cleancache support
ext3: add cleancache support
mm/fs: add hooks to support cleancache
mm: cleancache core ops functions and config
fs: add field to superblock to support cleancache
mm/fs: cleancache documentation
Fix up trivial conflict in fs/btrfs/extent_io.c due to includes
This eighth patch of eight in this cleancache series "opts-in"
cleancache for ocfs2. Clustered filesystems must explicitly enable
cleancache by calling cleancache_init_shared_fs anytime an instance
of the filesystem is mounted. Ocfs2 is currently the only user of
the clustered filesystem interface but nevertheless, the cleancache
hooks in the VFS layer are sufficient for ocfs2 including the matching
cleancache_flush_fs hook which must be called on unmount.
Details and a FAQ can be found in Documentation/vm/cleancache.txt
[v8: trivial merge conflict update]
[v5: jeremy@goop.org: simplify init hook and any future fs init changes]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Tso <tytso@mit.edu>
Cc: Nitin Gupta <ngupta@vflare.org>
Oops, local-mounted of 'ocfs2_fops_no_plocks' is just missing the support
of unwritten_extents/punching-hole due to no func pointer was given correctly
to '.follocate' field.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
During dlm domain shutdown, o2dlm has to free all the lock resources. Ones that
have no locks and references are freed. Ones that have locks and/or references
are migrated to another node.
The first task in migration is finding a target. Currently we scan the lock
resource and find one node that either has a lock or a reference. This is not
very efficient in a parallel umount case as we might end up migrating the
lock resource to a node which itself may have to migrate it to a third node.
The patch scans the dlm->exit_domain_map to ensure the target node is not
leaving the domain. If no valid target node is found, o2dlm does not migrate
the resource but instead waits for the unlock and deref messages that will
allow it to free the resource.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
This patch adds a new dlm message DLM_BEGIN_EXIT_DOMAIN_MSG and ups the dlm
protocol to 1.2.
o2dlm sends this new message in dlm_unregister_domain() to mark the beginning
of the exit domain. This message is sent to all nodes in the domain.
Currently o2dlm has no way of informing other nodes of its impending exit.
This information is useful as the other nodes could disregard the exiting
node in certain operations. For example, in resource migration. If two or
more nodes were umounting in parallel, it would be more efficient if o2dlm
were to choose a non-exiting node to be the new master node rather than an
exiting one.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
We're going to support partial extent moving, which may split entire extent
movement into pieces to compromise the insuffice allocations, it eases the
'ENSPC' pain and makes the whole moving much less likely to fail, the downside
is it may make the fs even more fragmented before moving, just let the userspace
make a trade-off here.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
the basic logic of moving extents for a file is pretty like punching-hole
sequence, walk the extents within the range as user specified, calculating
an appropriate len to defrag/move, then let ocfs2_defrag/move_extent() to
do the actual moving.
This func ends up setting 'OCFS2_MOVE_EXT_FL_COMPLETE' to userpace if operation
gets done successfully.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
The helper is to calculate the defrag length in one run according to a threshold,
it will proceed doing defragmentation until the threshold was meet, and skip a
LARGE extent if any.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
ocfs2_move_extent() logic will validate the goal_offset_in_block,
where extents to be moved, what's more, it also compromises a bit
to probe the appropriate region around given goal_offset when the
original goal is not able to fit the movement.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Before doing the movement of extents, we'd better probe the alloc group from
'goal_blk' for searching a contiguous region to fit the wanted movement, we
even will have a best-effort try by compromising to a threshold around the
given goal.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
First best-effort attempt to validate and adjust the goal (physical address in
block), while it can't guarantee later operation can succeed all the time since
global_bitmap may change a bit over time.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
This function tries locate the right alloc group, where a given physical block
resides, it returns the caller a buffer_head of victim group descriptor, and also
the offset of block in this group, by passing the block number.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
It's a relatively complete function to accomplish defragmentation for entire
or partial extent, one journal handle was kept during the operation, it was
logically doing one more thing than ocfs2_move_extent() acutally, yes, it's
claiming the new clusters itself;-)
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
The moving range of __ocfs2_move_extent() was within one extent always, it
consists following parts:
1. Duplicates the clusters in pages to new_blkoffset, where extent to be moved.
2. Split the original extent with new extent, coalecse the nearby extents if possible.
3. Append old clusters to truncate log, or decrease_refcount if the extent was refcounted.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
ocfs2_lock_allocators_move_extents() was like the common ocfs2_lock_allocators(),
to lock metadata and data alloctors during extents moving, reserve appropriate
metadata blocks and data clusters, also performa a best- effort to calculate the
credits for journal transaction in one run of movement.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
The original goal of commonizing these funcs is to benefit defraging/extent_moving
codes in the future, based on the fact that reflink and defragmentation having
the same Copy-On-Wrtie mechanism.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
This new code is a bit more complicated than former ones, the goal is to
show user all statistics required to take a deep insight into filesystem
on how the disk is being fragmentaed.
The goal is achieved by scaning global bitmap from (cluster)group to group
to figure out following factors in the filesystem:
- How many free chunks in a fixed size as user requested.
- How many real free chunks in all size.
- Min/Max/Avg size(in) clusters of free chunks.
- How do free chunks distribute(in size) in terms of a histogram,
just like following:
---------------------------------------------------------
Extent Size Range : Free extents Free Clusters Percent
32K... 64K- : 1 1 0.00%
1M... 2M- : 9 288 0.03%
8M... 16M- : 2 831 0.09%
32M... 64M- : 1 2047 0.23%
128M... 256M- : 1 8191 0.92%
256M... 512M- : 2 21706 2.43%
512M... 1024M- : 27 858623 96.29%
---------------------------------------------------------
Userspace ioctl() call eventually gets the above info returned by passing
a 'struct ocfs2_info_freefrag' with the chunk_size being specified first.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
The new code is dedicated to calculate free inodes number of all inode_allocs,
then return the info to userpace in terms of an array.
Specially, flag 'OCFS2_INFO_FL_NON_COHERENT', manipulated by '--cluster-coherent'
from userspace, is now going to be involved. setting the flag on means no cluster
coherency considered, usually, userspace tools choose none-coherency strategy by
default for the sake of performace.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Change function param_set_dlmfs_capabilities from 'extern' to 'static' since
function param_get_dlmfs_capabilities is also 'static'.
Signed-off-by: Robin Dong <sanbai@taobao.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Patch cleans up the gunk added by commit 388c4bcb4e.
dlm_is_lockres_migrateable() now returns 1 if lockresource is deemed
migrateable and 0 if not.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Add ocfs2_trim_fs to support trimming freed clusters in the
volume. A range will be given and all the freed clusters greater
than minlen will be discarded to the block layer.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
As ocfs2 supports relatime and strictatime, we need update the
relative document. Atime_quantum need work with strictatime, so only
show it in procfs when mount with strictatime.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
b43: fix comment typo reqest -> request
Haavard Skinnemoen has left Atmel
cris: typo in mach-fs Makefile
Kconfig: fix copy/paste-ism for dell-wmi-aio driver
doc: timers-howto: fix a typo ("unsgined")
perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
treewide: fix a few typos in comments
regulator: change debug statement be consistent with the style of the rest
Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
audit: acquire creds selectively to reduce atomic op overhead
rtlwifi: don't touch with treewide double semicolon removal
treewide: cleanup continuations and remove logging message whitespace
ath9k_hw: don't touch with treewide double semicolon removal
include/linux/leds-regulator.h: fix syntax in example code
tty: fix typo in descripton of tty_termios_encode_baud_rate
xtensa: remove obsolete BKL kernel option from defconfig
m68k: fix comment typo 'occcured'
arch:Kconfig.locks Remove unused config option.
treewide: remove extra semicolons
...
During resource migration, if the target node were to die, the thread doing
the migration spins until the target node is not removed from the domain map.
This patch slows the spin by making the thread wait for the recovery to kick in.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Patch skips mount recovery for hard-ro mounts which otherwise leads to an oops.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
If o2hb finds unexpected values in the heartbeat slot, it prints a message
"ERROR: Device "dm-6": another node is heartbeating in our slot!"
This message could be misleading. This patch adds two more messages to
help users better diagnose the problem.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
We have seen isolated cases (very few, I might add) of o2hb not detecting all
live nodes on startup. One plausible reasoning for it is that other node had
a hb io delay at the same time. The live threshold set at 2 (as low as it can
be) could be increased to ameliorate the situation.
But increasing the threshold directly affects mount time. Currently it takes
around 5 secs to mount a volume in o2cb cluster with local heartbeat. Increasing
the threshold will make mounts even slower. As the issue itself is rare, we have
left things as they are for the local heartbeat mode.
However we can improve the situation for global heartbeat mode as in that mode,
we start the heartbeat much before the mount.
This patch doubles the live threshold for the start of the first region in
global heartbeat mode.
Addresses internal Oracle bug#10635585.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Patch fixes a bug in the o2dlm protocol negotiation in that it is using
the builtin version rather than the negotiated version during the domain
join. This causes join errors when a node having kernel >= 2.6.37 joins
a cluster with nodes having kernels < 2.6.37.
This only affects the o2cb cluster stack.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Reported-by: Jacek Stepniewski <Jacek.Stepniewski@agora.pl>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
In the case of removing a partial extent record which covers a hole, current
punching-hole logic will try to remove more than the length of whole extent
record, which leads to the failure of following assert(fs/ocfs2/alloc.c):
5507 BUG_ON(cpos < le32_to_cpu(rec->e_cpos) || trunc_range > rec_range);
This patch tries to skip existing hole at the last attempt of removing a partial
extent record, what's more, it also adds some necessary comments for better
understanding of punching-hole codes.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
CLANG found that there is a path that has data_ac uninitialized,
this place
2917 /* This gets us the dx_root */
2918 ret = ocfs2_reserve_new_metadata_blocks(osb, 1, &meta_ac);
2919 if (ret) {
3
Taking true branch
2920 mlog_errno(ret);
2921 goto out;
4
Control jumps to line 3168
2922 }
Goes to the out: label without data_ac being initialized.
Ciao, Marcus
Signed-Off-By: Marcus Meissner <meissner@suse.de>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
When a hole spans across page boundaries, the next write forces
a read of the block. This could end up reading existing garbage
data from the disk in ocfs2_map_page_blocks. This leads to
non-zero holes. In order to avoid this, mark the writes as new
when the holes span across page boundaries.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: jlbec <jlbec@evilplan.org>
When CONFIG_DEBUG_FS=y and CONFIG_OCFS2_FS_STATS=n, we get the
following warning:
fs/ocfs2/cluster/tcp.c:213:16: warning: ‘o2net_get_func_run_time’
defined but not used
Since o2net_get_func_run_time is only called from
o2net_update_recv_stats, so move it under CONFIG_OCFS2_FS_STATS.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: jlbec <jlbec@evilplan.org>
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
Documentation/iostats.txt: bit-size reference etc.
cfq-iosched: removing unnecessary think time checking
cfq-iosched: Don't clear queue stats when preempt.
blk-throttle: Reset group slice when limits are changed
blk-cgroup: Only give unaccounted_time under debug
cfq-iosched: Don't set active queue in preempt
block: fix non-atomic access to genhd inflight structures
block: attempt to merge with existing requests on plug flush
block: NULL dereference on error path in __blkdev_get()
cfq-iosched: Don't update group weights when on service tree
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
block: Require subsystems to explicitly allocate bio_set integrity mempool
jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
fs: make fsync_buffers_list() plug
mm: make generic_writepages() use plugging
blk-cgroup: Add unaccounted time to timeslice_used.
block: fixup plugging stubs for !CONFIG_BLOCK
block: remove obsolete comments for blkdev_issue_zeroout.
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
...
Fix up conflicts in fs/{aio.c,super.c}
And give it a kernel-doc comment.
[akpm@linux-foundation.org: btrfs changed in linux-next]
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As a preparation for removing ext2 non-atomic bit operations from
asm/bitops.h. This converts ext2 non-atomic bit operations to
little-endian bit operations.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits)
video: change to new flag variable
scsi: change to new flag variable
rtc: change to new flag variable
rapidio: change to new flag variable
pps: change to new flag variable
net: change to new flag variable
misc: change to new flag variable
message: change to new flag variable
memstick: change to new flag variable
isdn: change to new flag variable
ieee802154: change to new flag variable
ide: change to new flag variable
hwmon: change to new flag variable
dma: change to new flag variable
char: change to new flag variable
fs: change to new flag variable
xtensa: change to new flag variable
um: change to new flag variables
s390: change to new flag variable
mips: change to new flag variable
...
Fix up trivial conflict in drivers/hwmon/Makefile
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
Update cpuset info & webiste for cgroups
dcdbas: force SMI to happen when expected
arch/arm/Kconfig: remove one to many l's in the word.
asm-generic/user.h: Fix spelling in comment
drm: fix printk typo 'sracth'
Remove one to many n's in a word
Documentation/filesystems/romfs.txt: fixing link to genromfs
drivers:scsi Change printk typo initate -> initiate
serial, pch uart: Remove duplicate inclusion of linux/pci.h header
fs/eventpoll.c: fix spelling
mm: Fix out-of-date comments which refers non-existent functions
drm: Fix printk typo 'failled'
coh901318.c: Change initate to initiate.
mbox-db5500.c Change initate to initiate.
edac: correct i82975x error-info reported
edac: correct i82975x mci initialisation
edac: correct commented info
fs: update comments to point correct document
target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
...
Trivial conflict in fs/eventpoll.c (spelling vs addition)
Replace EXTRA_CFLAGS with ccflags-y. And change ntfs-objs to ntfs-y
for cleaner conditional inclusion.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (33 commits)
AppArmor: kill unused macros in lsm.c
AppArmor: cleanup generated files correctly
KEYS: Add an iovec version of KEYCTL_INSTANTIATE
KEYS: Add a new keyctl op to reject a key with a specified error code
KEYS: Add a key type op to permit the key description to be vetted
KEYS: Add an RCU payload dereference macro
AppArmor: Cleanup make file to remove cruft and make it easier to read
SELinux: implement the new sb_remount LSM hook
LSM: Pass -o remount options to the LSM
SELinux: Compute SID for the newly created socket
SELinux: Socket retains creator role and MLS attribute
SELinux: Auto-generate security_is_socket_class
TOMOYO: Fix memory leak upon file open.
Revert "selinux: simplify ioctl checking"
selinux: drop unused packet flow permissions
selinux: Fix packet forwarding checks on postrouting
selinux: Fix wrong checks for selinux_policycap_netpeer
selinux: Fix check for xfrm selinux context algorithm
ima: remove unnecessary call to ima_must_measure
IMA: remove IMA imbalance checking
...
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix build failure introduced by s/freezeable/freezable/
workqueue: add system_freezeable_wq
rds/ib: use system_wq instead of rds_ib_fmr_wq
net/9p: replace p9_poll_task with a work
net/9p: use system_wq instead of p9_mux_wq
xfs: convert to alloc_workqueue()
reiserfs: make commit_wq use the default concurrency level
ocfs2: use system_wq instead of ocfs2_quota_wq
ext4: convert to alloc_workqueue()
scsi/scsi_tgt_lib: scsi_tgtd isn't used in memory reclaim path
scsi/be2iscsi,qla2xxx: convert to alloc_workqueue()
misc/iwmc3200top: use system_wq instead of dedicated workqueues
i2o: use alloc_workqueue() instead of create_workqueue()
acpi: kacpi*_wq don't need WQ_MEM_RECLAIM
fs/aio: aio_wq isn't used in memory reclaim path
input/tps6507x-ts: use system_wq instead of dedicated workqueue
cpufreq: use system_wq instead of dedicated workqueues
wireless/ipw2x00: use system_wq instead of dedicated workqueues
arm/omap: use system_wq in mailbox
workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER
The exportfs encode handle function should return the minimum required
handle size. This helps user to find out the handle size by passing 0
handle size in the first step and then redoing to the call again with
the returned handle size value.
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
all remaining callers pass LOOKUP_PARENT to it, so
flags argument can die; renamed to kern_path_parent()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
In dlm_query_region_handler(), move the kmalloc outside the spinlock.
This allows us to use GFP_KERNEL instead of GFP_ATOMIC.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Remove mlog(0,...) and mlog(ML_UPTODATE,...) from
fs/ocfs2/uptodate.c and fs/ocfs2/buffer_head_io.c.
The masklog UPTODATE is removed finally.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Remove mlog(0,...) and mlog(ML_BH_IO,...) from
fs/ocfs2/buffer_head_io.c.
The masklog BH_IO is removed finally.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
ocfs2_iget is used to get/create inode. Only iget5_locked
will give us an inode = NULL. So move this check ahead of
ocfs2_read_locked_inode so that we don't need to check
inode before we read and unlock inode. This is also helpful
for trace event(see the next patch).
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
As there are no such debug information in fs/ocfs2/ioctl.c,
fs/ocfs2/locks.c and fs/ocfs2/sysfile.c, ML_INODE are also
removed.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Change all the "mlog(0," in fs/ocfs2/refcounttree.c to trace events.
And finally remove masklog ML_REFCOUNT.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Since all 4 files, localalloc.c, suballoc.c, alloc.c and
resize.c, which use DISK_ALLOC are changed to trace events,
Remove masklog DISK_ALLOC totally.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
This is the 2nd step to remove the debug info of DISK_ALLOC.
So this patch removes all mlog(0,...) from localalloc.c and adds
the corresponding tracepoints. Different mlogs have different
solutions.
1. Some are replaced with trace event directly.
2. Some are replaced while some new parameters are added.
3. Some are combined into one trace events.
4. Some redundant mlogs are removed.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
This is the first try of replacing debug mlog(0,...) to
trace events. Wengang has did some work in his original
patch
http://oss.oracle.com/pipermail/ocfs2-devel/2009-November/005513.html
But he didn't finished it.
So this patch removes all mlog(0,...) from alloc.c and adds
the corresponding trace events. Different mlogs have different
solutions.
1. Some are replaced with trace event directly.
2. Some are replaced and some new parameters are added since
I think we need to know the btree owner in that case.
3. Some are combined into one trace events.
4. Some redundant mlogs are removed.
What's more, it defines some event classes so that we can use
them later.
Cc: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
About one year ago, Wengang Wang tried some first steps
to add tracepoints to ocfs2. Hiss original patch is here:
http://oss.oracle.com/pipermail/ocfs2-devel/2009-November/005512.html
But as Steven Rostedt indicated in his article
http://lwn.net/Articles/383362/, we'd better have our trace
files resides in fs/ocfs2, so I rewrited the patch using the
method Steven mentioned in that article.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
mlog_exit is used to record the exit status of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.
This patch just try to remove it or change it. So:
1. if all the error paths already use mlog_errno, it is just removed.
Otherwise, it will be replaced by mlog_errno.
2. if it is used to print some return value, it is replaced with
mlog(0,...).
mlog_exit_ptr is changed to mlog(0.
All those mlog(0,...) will be replaced with trace events later.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
ENTRY is used to record the entry of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.
So for mlog_entry_void, we just remove it.
for mlog_entry(...), we replace it with mlog(0,...), and they
will be replace by trace event later.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
It's a best-effort attempt to simplize duplicated codes here.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
In cad3f00, ext4_check_dir_entry was modified by adding some unlikely.
Ted described it as "This function gets called a lot for large
directories, and the answer is almost always 'no, no, there's no problem'.
This means using unlikely() is a good thing."
ext3 added the similar change in commit a4ae309.
So change it accordingly in ocfs2.
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Patch makes use of the hrtimer to track times in ocfs2 lock stats.
The patch is a bit involved to ensure no additional impact on the memory
footprint. The size of ocfs2_inode_cache remains 1280 bytes on 32-bit systems.
A related change was to modify the unit of the max wait time from nanosec to
microsec allowing us to track max time larger than 4 secs. This change
necessitated the bumping of the output version in the debugfs file,
locking_state, from 2 to 3.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Commit 2c442719e9 added some checks for proper
heartbeat mode when the o2cb stack is running. Unfortunately, it didn't
take into account that a userpsace stack could be running. Fix this by only
doing the check if o2cb is in use. This patch allows userspace stacks to
mount the fs again.
Cc: stable@kernel.org
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Current refcounttree codes actually didn't writeback the new pages out in
write-back mode, due to a bug of always passing a ZERO number of clusters
to 'ocfs2_cow_sync_writeback', the patch tries to pass a proper one in.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Joel Becker <jlbec@evilplan.org>
In the rare case that INLINE_DATA, INDEX_DIR, QUOTA, XATTR features are
disabled and both the allocation of the directory inode and the allocation
of the first directory block need to relink allocation group, there need
not be enough credits reserved in a transaction. Fix the estimate.
CC: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
SELinux would like to implement a new labeling behavior of newly created
inodes. We currently label new inodes based on the parent and the creating
process. This new behavior would also take into account the name of the
new object when deciding the new label. This is not the (supposed) full path,
just the last component of the path.
This is very useful because creating /etc/shadow is different than creating
/etc/passwd but the kernel hooks are unable to differentiate these
operations. We currently require that userspace realize it is doing some
difficult operation like that and than userspace jumps through SELinux hoops
to get things set up correctly. This patch does not implement new
behavior, that is obviously contained in a seperate SELinux patch, but it
does pass the needed name down to the correct LSM hook. If no such name
exists it is fine to pass NULL.
Signed-off-by: Eric Paris <eparis@redhat.com>
ocfs2_quota_wq is not depended upon during memory reclaim and, with
cmwq, there's no reason to use a dedicated workqueue. Drop
ocfs2_quota_wq and use system_wq instead. dqi_sync_work is already
sync canceled on quota disable and no further synchronization is
necessary.
This change makes ocfs2_quota_setup/shutdown() noops. Both functions
removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Fix a bunch of
warning: ‘inline’ is not at beginning of declaration
messages when building a 'make allyesconfig' kernel with -Wextra.
These warnings are trivial to kill, yet rather annoying when building with
-Wextra.
The more we can cut down on pointless crap like this the better (IMHO).
A previous patch to do this for a 'allnoconfig' build has already been
merged. This just takes the cleanup a little further.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently all filesystems except XFS implement fallocate asynchronously,
while XFS forced a commit. Both of these are suboptimal - in case of O_SYNC
I/O we really want our allocation on disk, especially for the !KEEP_SIZE
case where we actually grow the file with user-visible zeroes. On the
other hand always commiting the transaction is a bad idea for fast-path
uses of fallocate like for example in recent Samba versions. Given
that block allocation is a data plane operation anyway change it from
an inode operation to a file operation so that we have the file structure
available that lets us check for O_SYNC.
This also includes moving the code around for a few of the filesystems,
and remove the already unnedded S_ISDIR checks given that we only wire
up fallocate for regular files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of various home grown checks that might need updates for new
flags just check for any bit outside the mask of the features supported
by the filesystem. This makes the check future proof for any newly
added flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch fixes the following kconfig error after changing
CONFIGFS_FS -> select SYSFS:
fs/sysfs/Kconfig:1:error: recursive dependency detected!
fs/sysfs/Kconfig:1: symbol SYSFS is selected by CONFIGFS_FS
fs/configfs/Kconfig:1: symbol CONFIGFS_FS is selected by OCFS2_FS
fs/ocfs2/Kconfig:1: symbol OCFS2_FS depends on SYSFS
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: James Bottomley <James.Bottomley@suse.de>
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
block: ensure that completion error gets properly traced
blktrace: add missing probe argument to block_bio_complete
block cfq: don't use atomic_t for cfq_group
block cfq: don't use atomic_t for cfq_queue
block: trace event block fix unassigned field
block: add internal hd part table references
block: fix accounting bug on cross partition merges
kref: add kref_test_and_get
bio-integrity: mark kintegrityd_wq highpri and CPU intensive
block: make kblockd_workqueue smarter
Revert "sd: implement sd_check_events()"
block: Clean up exit_io_context() source code.
Fix compile warnings due to missing removal of a 'ret' variable
fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
cfq-iosched: don't check cfqg in choose_service_tree()
fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
cdrom: export cdrom_check_events()
sd: implement sd_check_events()
sr: implement sr_check_events()
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (41 commits)
fs: add documentation on fallocate hole punching
Gfs2: fail if we try to use hole punch
Btrfs: fail if we try to use hole punch
Ext4: fail if we try to use hole punch
Ocfs2: handle hole punching via fallocate properly
XFS: handle hole punching via fallocate properly
fs: add hole punching to fallocate
vfs: pass struct file to do_truncate on O_TRUNC opens (try #2)
fix signedness mess in rw_verify_area() on 64bit architectures
fs: fix kernel-doc for dcache::prepend_path
fs: fix kernel-doc for dcache::d_validate
sanitize ecryptfs ->mount()
switch afs
move internal-only parts of ncpfs headers to fs/ncpfs
switch ncpfs
switch 9p
pass default dentry_operations to mount_pseudo()
switch hostfs
switch affs
switch configfs
...
This patch just makes ocfs2 use its UNRESERVP ioctl when we get the hole punch
flag in fallocate. I didn't test it, but it seems simple enough. Thanks,
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
As Al Viro pointed out path resolution during Q_QUOTAON calls to quotactl
is prone to deadlocks. We hold s_umount semaphore for reading during the
path resolution and resolution itself may need to acquire the semaphore
for writing when e. g. autofs mountpoint is passed.
Solve the problem by performing the resolution before we get hold of the
superblock (and thus s_umount semaphore). The whole thing is complicated
by the fact that some filesystems (OCFS2) ignore the path argument. So to
distinguish between filesystem which want the path and which do not we
introduce new .quota_on_meta callback which does not get the path. OCFS2
then uses this callback instead of old .quota_on.
CC: Al Viro <viro@ZenIV.linux.org.uk>
CC: Christoph Hellwig <hch@lst.de>
CC: Ted Ts'o <tytso@mit.edu>
CC: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (22 commits)
MAINTAINERS: Update Joel Becker's email address
ocfs2: Remove unused truncate function from alloc.c
ocfs2/cluster: dereferencing before checking in nst_seq_show()
ocfs2: fix build for OCFS2_FS_STATS not enabled
ocfs2/cluster: Show o2net timing statistics
ocfs2/cluster: Track process message timing stats for each socket
ocfs2/cluster: Track send message timing stats for each socket
ocfs2/cluster: Use ktime instead of timeval in struct o2net_sock_container
ocfs2/cluster: Replace timeval with ktime in struct o2net_send_tracking
ocfs2: Add DEBUG_FS dependency
ocfs2/dlm: Hard code the values for enums
ocfs2/dlm: Minor cleanup
ocfs2/dlm: Cleanup dlmdebug.c
ocfs2: Release buffer_head in case of error in ocfs2_double_lock.
ocfs2/cluster: Pin the local node when o2hb thread starts
ocfs2/cluster: Show pin state for each o2hb region
ocfs2/cluster: Pin/unpin o2hb regions
ocfs2/cluster: Remove dropped region from o2hb quorum region bitmap
ocfs2/cluster: Pin the remote node item in configfs
ocfs2/dlm: make existing convertion precedent over new lock
...
Tristan Ye has done some refactoring against our truncate
process, so some functions like ocfs2_prepare_truncate and
ocfs2_free_truncate_context are no use and we'd better
remove them.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In the original code, we dereferenced "nst" before checking that it was
non-NULL. I moved the check forward and pulled the code in an indent
level.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
When CONFIG_OCFS2_FS_STATS is not enabled:
fs/ocfs2/cluster/tcp.c:1254: error: implicit declaration of function 'o2net_update_recv_stats'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: ocfs2-devel@oss.oracle.com
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits)
usb: don't use flush_scheduled_work()
speedtch: don't abuse struct delayed_work
media/video: don't use flush_scheduled_work()
media/video: explicitly flush request_module work
ioc4: use static work_struct for ioc4_load_modules()
init: don't call flush_scheduled_work() from do_initcalls()
s390: don't use flush_scheduled_work()
rtc: don't use flush_scheduled_work()
mmc: update workqueue usages
mfd: update workqueue usages
dvb: don't use flush_scheduled_work()
leds-wm8350: don't use flush_scheduled_work()
mISDN: don't use flush_scheduled_work()
macintosh/ams: don't use flush_scheduled_work()
vmwgfx: don't use flush_scheduled_work()
tpm: don't use flush_scheduled_work()
sonypi: don't use flush_scheduled_work()
hvsi: don't use flush_scheduled_work()
xen: don't use flush_scheduled_work()
gdrom: don't use flush_scheduled_work()
...
Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c
as per Tejun.
dcache_inode_lock can be replaced with per-inode locking. Use existing
inode->i_lock for this. This is slightly non-trivial because we sometimes
need to find the inode from the dentry, which requires d_inode to be
stabilised (either with refcount or d_lock).
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Require filesystems be aware of .d_revalidate being called in rcu-walk
mode (nd->flags & LOOKUP_RCU). For now do a simple push down, returning
-ECHILD from all implementations.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Reduce some branches and memory accesses in dcache lookup by adding dentry
flags to indicate common d_ops are set, rather than having to check them.
This saves a pointer memory access (dentry->d_op) in common path lookup
situations, and saves another pointer load and branch in cases where we
have d_op but not the particular operation.
Patched with:
git grep -E '[.>]([[:space:]])*d_op([[:space:]])*=' | xargs sed -e 's/\([^\t ]*\)->d_op = \(.*\);/d_set_d_op(\1, \2);/' -e 's/\([^\t ]*\)\.d_op = \(.*\);/d_set_d_op(\&\1, \2);/' -i
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
RCU free the struct inode. This will allow:
- Subsequent store-free path walking patch. The inode must be consulted for
permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
to take i_lock no longer need to take sb_inode_list_lock to walk the list in
the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
page lock to follow page->mapping.
The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.
In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.
The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
dget_locked was a shortcut to avoid the lazy lru manipulation when we already
held dcache_lock (lru manipulation was relatively cheap at that point).
However, how that the lru lock is an innermost one, we never hold it at any
caller, so the lock cost can now be avoided. We already have well working lazy
dcache LRU, so it should be fine to defer LRU manipulations to scan time.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Add a new lock, dcache_inode_lock, to protect the inode's i_dentry list
from concurrent modification. d_alias is also protected by d_lock.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Protect d_unhashed(dentry) condition with d_lock. This means keeping
DCACHE_UNHASHED bit in synch with hash manipulations.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
flush_scheduled_work() is deprecated and scheduled to be removed.
* cancel_delayed_work() + flush_schedule_work() ->
cancel_delayed_work_sync().
* flush qs->qs_work directly on exit instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Joel Becker <joel.becker@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2: Fix system inodes cache overflow.
ocfs2: Hold ip_lock when set/clear flags for indexed dir.
ocfs2: Adjust masklog flag values
Ocfs2: Teach 'coherency=full' O_DIRECT writes to correctly up_read i_alloc_sem.
ocfs2/dlm: Migrate lockres with no locks if it has a reference
Adds debugfs dentry o2net/stats to show the o2net timing statistics.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Tracks total time taken to process messages received on a socket.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Tracks total send and status times for all messages sent on a socket.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Replace time trackers in struct o2net_sock_container from struct timeval to
union ktime.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Replace time trackers in struct o2net_send_tracking from struct timeval to
union ktime.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In o2dlm, the enumerated message values are part of the protocol.
The patch hard codes each value so as to reduce the chance of an editing
error causing a protocol mismatch.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Patch makes use of task_pid_nr(). Also removes the null check before calling
debugfs_remove().
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In ocfs2_double_lock, when ocfs2_inode_lock for inode1 fails, we
just unlock inode2 and return without releasing buffer we get from
inode_lock(inode2). The good thing is that it is freed by the only
caller ocfs2_rename when it exits.
But I don't think this is a right way for error handling. We should
free the buffer_head we get in ocfs2_double_lock before exit so that
the caller doesn't need to take care of it.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Conflicts:
MAINTAINERS
arch/arm/mach-omap2/pm24xx.c
drivers/scsi/bfa/bfa_fcpim.c
Needed to update to apply fixes for which the old branch was too
outdated.
When we store system inodes cache in ocfs2_super,
we use a array for global system inodes. But unfortunately,
the range is calculated wrongly which makes it overflow and
pollute ocfs2_super->local_system_inodes.
This patch fix it by setting the range properly.
The corresponding bug is ossbug1303.
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1303
Cc: stable@kernel.org
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The patch pins the node item of the local node when the o2hb thread
starts and unpins on stop.
An earlier patch pinned the node item of the remote node on o2net
connect and unpinned on disconnect.
Signed-off-by Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch adds a per o2hb region debugfs file that shows whether that region
is pinned or not.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch adds support for pinning o2hb regions in configfs. Pinning disallows
a region to be cleanly stopped as long as it has an active dependent user
(read o2dlm).
In local heartbeat mode, the region uuid matching the domain name is pinned as
long as the o2dlm domain is active.
In global heartbeat mode, all regions are pinned as long as there is atleast
one dependent user and the region count is 3 or less. All regions are unpinned
if the number of dependent users is zero or region count is greater than 3.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Patch removes a dropped region from the quorum region bitmap maintained by o2hb.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
o2net pins the node item of the remote node in configfs before initiating
the connection. It is unpinned on disconnect. This is to prevent the node
item from being unlinked while it is still in use.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Make existing convertion precedent over new lock. It makes o2dlm locking more
like fair locking.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Al Viro