openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
948,928 Commits 18 Branches 27 Tags 3.4 GiB
Commit Graph

19 Commits

Author SHA1 Message Date
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2019-05-30 11:26:32 -07:00
Stephen Boyd 62e59c4e69 clk: Remove io.h from clk-provider.h 
Now that we've gotten rid of clk_readl() we can remove io.h from the
clk-provider header and push out the io.h include to any code that isn't
already including the io.h header but using things like readl/writel,
etc.

Found with this grep:

  git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \
  	xargs git grep -l \
	-e '\<__iowrite32_copy\>' --or \
	-e '\<__ioread32_copy\>' --or \
	-e '\<__iowrite64_copy\>' --or \
	-e '\<ioremap_page_range\>' --or \
	-e '\<ioremap_huge_init\>' --or \
	-e '\<arch_ioremap_pud_supported\>' --or \
	-e '\<arch_ioremap_pmd_supported\>' --or \
	-e '\<devm_ioport_map\>' --or \
	-e '\<devm_ioport_unmap\>' --or \
	-e '\<IOMEM_ERR_PTR\>' --or \
	-e '\<devm_ioremap\>' --or \
	-e '\<devm_ioremap_nocache\>' --or \
	-e '\<devm_ioremap_wc\>' --or \
	-e '\<devm_iounmap\>' --or \
	-e '\<devm_ioremap_release\>' --or \
	-e '\<devm_memremap\>' --or \
	-e '\<devm_memunmap\>' --or \
	-e '\<__devm_memremap_pages\>' --or \
	-e '\<pci_remap_cfgspace\>' --or \
	-e '\<arch_has_dev_port\>' --or \
	-e '\<arch_phys_wc_add\>' --or \
	-e '\<arch_phys_wc_del\>' --or \
	-e '\<memremap\>' --or \
	-e '\<memunmap\>' --or \
	-e '\<arch_io_reserve_memtype_wc\>' --or \
	-e '\<arch_io_free_memtype_wc\>' --or \
	-e '\<__io_aw\>' --or \
	-e '\<__io_pbw\>' --or \
	-e '\<__io_paw\>' --or \
	-e '\<__io_pbr\>' --or \
	-e '\<__io_par\>' --or \
	-e '\<__raw_readb\>' --or \
	-e '\<__raw_readw\>' --or \
	-e '\<__raw_readl\>' --or \
	-e '\<__raw_readq\>' --or \
	-e '\<__raw_writeb\>' --or \
	-e '\<__raw_writew\>' --or \
	-e '\<__raw_writel\>' --or \
	-e '\<__raw_writeq\>' --or \
	-e '\<readb\>' --or \
	-e '\<readw\>' --or \
	-e '\<readl\>' --or \
	-e '\<readq\>' --or \
	-e '\<writeb\>' --or \
	-e '\<writew\>' --or \
	-e '\<writel\>' --or \
	-e '\<writeq\>' --or \
	-e '\<readb_relaxed\>' --or \
	-e '\<readw_relaxed\>' --or \
	-e '\<readl_relaxed\>' --or \
	-e '\<readq_relaxed\>' --or \
	-e '\<writeb_relaxed\>' --or \
	-e '\<writew_relaxed\>' --or \
	-e '\<writel_relaxed\>' --or \
	-e '\<writeq_relaxed\>' --or \
	-e '\<readsb\>' --or \
	-e '\<readsw\>' --or \
	-e '\<readsl\>' --or \
	-e '\<readsq\>' --or \
	-e '\<writesb\>' --or \
	-e '\<writesw\>' --or \
	-e '\<writesl\>' --or \
	-e '\<writesq\>' --or \
	-e '\<inb\>' --or \
	-e '\<inw\>' --or \
	-e '\<inl\>' --or \
	-e '\<outb\>' --or \
	-e '\<outw\>' --or \
	-e '\<outl\>' --or \
	-e '\<inb_p\>' --or \
	-e '\<inw_p\>' --or \
	-e '\<inl_p\>' --or \
	-e '\<outb_p\>' --or \
	-e '\<outw_p\>' --or \
	-e '\<outl_p\>' --or \
	-e '\<insb\>' --or \
	-e '\<insw\>' --or \
	-e '\<insl\>' --or \
	-e '\<outsb\>' --or \
	-e '\<outsw\>' --or \
	-e '\<outsl\>' --or \
	-e '\<insb_p\>' --or \
	-e '\<insw_p\>' --or \
	-e '\<insl_p\>' --or \
	-e '\<outsb_p\>' --or \
	-e '\<outsw_p\>' --or \
	-e '\<outsl_p\>' --or \
	-e '\<ioread8\>' --or \
	-e '\<ioread16\>' --or \
	-e '\<ioread32\>' --or \
	-e '\<ioread64\>' --or \
	-e '\<iowrite8\>' --or \
	-e '\<iowrite16\>' --or \
	-e '\<iowrite32\>' --or \
	-e '\<iowrite64\>' --or \
	-e '\<ioread16be\>' --or \
	-e '\<ioread32be\>' --or \
	-e '\<ioread64be\>' --or \
	-e '\<iowrite16be\>' --or \
	-e '\<iowrite32be\>' --or \
	-e '\<iowrite64be\>' --or \
	-e '\<ioread8_rep\>' --or \
	-e '\<ioread16_rep\>' --or \
	-e '\<ioread32_rep\>' --or \
	-e '\<ioread64_rep\>' --or \
	-e '\<iowrite8_rep\>' --or \
	-e '\<iowrite16_rep\>' --or \
	-e '\<iowrite32_rep\>' --or \
	-e '\<iowrite64_rep\>' --or \
	-e '\<__io_virt\>' --or \
	-e '\<pci_iounmap\>' --or \
	-e '\<virt_to_phys\>' --or \
	-e '\<phys_to_virt\>' --or \
	-e '\<ioremap_uc\>' --or \
	-e '\<ioremap\>' --or \
	-e '\<__ioremap\>' --or \
	-e '\<iounmap\>' --or \
	-e '\<ioremap\>' --or \
	-e '\<ioremap_nocache\>' --or \
	-e '\<ioremap_uc\>' --or \
	-e '\<ioremap_wc\>' --or \
	-e '\<ioremap_wc\>' --or \
	-e '\<ioremap_wt\>' --or \
	-e '\<ioport_map\>' --or \
	-e '\<ioport_unmap\>' --or \
	-e '\<ioport_map\>' --or \
	-e '\<ioport_unmap\>' --or \
	-e '\<xlate_dev_kmem_ptr\>' --or \
	-e '\<xlate_dev_mem_ptr\>' --or \
	-e '\<unxlate_dev_mem_ptr\>' --or \
	-e '\<virt_to_bus\>' --or \
	-e '\<bus_to_virt\>' --or \
	-e '\<memset_io\>' --or \
	-e '\<memcpy_fromio\>' --or \
	-e '\<memcpy_toio\>'

I also reordered a couple includes when they weren't alphabetical and
removed clk.h from kona, replacing it with clk-provider.h because
that driver doesn't use clk consumer APIs.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: John Crispin <john@phrozen.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-05-15 13:21:37 -07:00
Jernej Skrabec 1054e4dd1c
clk: sunxi-ng: nkmp: Explain why zero width check is needed 
Add an explanation why zero width check is needed when generating factor
mask using GENMASK() macro.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
 2019-04-04 09:32:32 +02:00
Jernej Skrabec 2abc330c51
clk: sunxi-ng: nkmp: Avoid GENMASK(-1, 0) 
Sometimes one of the nkmp factors is unused. This means that one of the
factors shift and width values are set to 0. Current nkmp clock code
generates a mask for each factor with GENMASK(width + shift - 1, shift).
For unused factor this translates to GENMASK(-1, 0). This code is
further expanded by C preprocessor to final version:
(((~0UL) - (1UL << (0)) + 1) & (~0UL >> (BITS_PER_LONG - 1 - (-1))))
or a bit simplified:
(~0UL & (~0UL >> BITS_PER_LONG))

It turns out that result of the second part (~0UL >> BITS_PER_LONG) is
actually undefined by C standard, which clearly specifies:

"If the value of the right operand is negative or is greater than or
equal to the width of the promoted left operand, the behavior is
undefined."

Additionally, compiling kernel with aarch64-linux-gnu-gcc 8.3.0 gave
different results whether literals or variables with same values as
literals were used. GENMASK with literals -1 and 0 gives zero and with
variables gives 0xFFFFFFFFFFFFFFF (~0UL). Because nkmp driver uses
GENMASK with variables as parameter, expression calculates mask as ~0UL
instead of 0. This has further consequences that LSB in register is
always set to 1 (1 is neutral value for a factor and shift is 0).

For example, H6 pll-de clock is set to 600 MHz by sun4i-drm driver, but
due to this bug ends up being 300 MHz. Additionally, 300 MHz seems to be
too low because following warning can be found in dmesg:

[    1.752763] WARNING: CPU: 2 PID: 41 at drivers/clk/sunxi-ng/ccu_common.c:41 ccu_helper_wait_for_lock.part.0+0x6c/0x90
[    1.763378] Modules linked in:
[    1.766441] CPU: 2 PID: 41 Comm: kworker/2:1 Not tainted 5.1.0-rc2-next-20190401 #138
[    1.774269] Hardware name: Pine H64 (DT)
[    1.778200] Workqueue: events deferred_probe_work_func
[    1.783341] pstate: 40000005 (nZcv daif -PAN -UAO)
[    1.788135] pc : ccu_helper_wait_for_lock.part.0+0x6c/0x90
[    1.793623] lr : ccu_helper_wait_for_lock.part.0+0x48/0x90
[    1.799107] sp : ffff000010f93840
[    1.802422] x29: ffff000010f93840 x28: 0000000000000000
[    1.807735] x27: ffff800073ce9d80 x26: ffff000010afd1b8
[    1.813049] x25: ffffffffffffffff x24: 00000000ffffffff
[    1.818362] x23: 0000000000000001 x22: ffff000010abd5c8
[    1.823675] x21: 0000000010000000 x20: 00000000685f367e
[    1.828987] x19: 0000000000001801 x18: 0000000000000001
[    1.834300] x17: 0000000000000001 x16: 0000000000000000
[    1.839613] x15: 0000000000000000 x14: ffff000010789858
[    1.844926] x13: 0000000000000000 x12: 0000000000000001
[    1.850239] x11: 0000000000000000 x10: 0000000000000970
[    1.855551] x9 : ffff000010f936c0 x8 : ffff800074cec0d0
[    1.860864] x7 : 0000800067117000 x6 : 0000000115c30b41
[    1.866177] x5 : 00ffffffffffffff x4 : 002c959300bfe500
[    1.871490] x3 : 0000000000000018 x2 : 0000000029aaaaab
[    1.876802] x1 : 00000000000002e6 x0 : 00000000686072bc
[    1.882114] Call trace:
[    1.884565]  ccu_helper_wait_for_lock.part.0+0x6c/0x90
[    1.889705]  ccu_helper_wait_for_lock+0x10/0x20
[    1.894236]  ccu_nkmp_set_rate+0x244/0x2a8
[    1.898334]  clk_change_rate+0x144/0x290
[    1.902258]  clk_core_set_rate_nolock+0x180/0x1b8
[    1.906963]  clk_set_rate+0x34/0xa0
[    1.910455]  sun8i_mixer_bind+0x484/0x558
[    1.914466]  component_bind_all+0x10c/0x230
[    1.918651]  sun4i_drv_bind+0xc4/0x1a0
[    1.922401]  try_to_bring_up_master+0x164/0x1c0
[    1.926932]  __component_add+0xa0/0x168
[    1.930769]  component_add+0x10/0x18
[    1.934346]  sun8i_dw_hdmi_probe+0x18/0x20
[    1.938443]  platform_drv_probe+0x50/0xa0
[    1.942455]  really_probe+0xcc/0x280
[    1.946032]  driver_probe_device+0x54/0xe8
[    1.950130]  __device_attach_driver+0x80/0xb8
[    1.954488]  bus_for_each_drv+0x78/0xc8
[    1.958326]  __device_attach+0xd4/0x130
[    1.962163]  device_initial_probe+0x10/0x18
[    1.966348]  bus_probe_device+0x90/0x98
[    1.970185]  deferred_probe_work_func+0x6c/0xa0
[    1.974720]  process_one_work+0x1e0/0x320
[    1.978732]  worker_thread+0x228/0x428
[    1.982484]  kthread+0x120/0x128
[    1.985714]  ret_from_fork+0x10/0x18
[    1.989290] ---[ end trace 9babd42e1ca4b84f ]---

This commit solves the issue by first checking value of the factor
width. If it is equal to 0 (unused factor), mask is set to 0, otherwise
GENMASK() macro is used as before.

Fixes: d897ef56fa ("clk: sunxi-ng: Mask nkmp factors when setting register")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
 2019-04-03 09:53:04 +02:00
Jernej Skrabec a8e5433cdc
clk: sunxi-ng: nkmp: Add constraint for maximum rate 
Some, if not most, NKMP PLLs can be set to higher rate that is really
supported by HW.

Implement support for maximum frequency constrain for NKMP PLLs.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
 2018-08-27 09:18:10 +02:00
Icenowy Zheng a910f251ee
clk: sunxi-ng: Support fixed post-dividers on NKMP style clocks 
On the new Allwinner H6 SoC, multiple PLL's are NMP style clocks
(modelled as NKMP with no K) and have fixed post-dividers.

Add fixed post divider support to the NKMP style clocks.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
 2018-03-18 21:16:54 +01:00
Jernej Skrabec a5ebc3368e
clk: sunxi-ng: Use u64 for calculation of nkmp rate 
When parent rate is 24MHz and multiplier N >= 180, intermediate clock
rate doesn't fit in 32 bit variable anymore.

Because of that, introduce function for calculating clock rate which
uses 64 bit variable for intermediate result.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
 2018-02-15 14:40:24 +01:00
Jernej Skrabec d897ef56fa
clk: sunxi-ng: Mask nkmp factors when setting register 
Currently, if one of the factors isn't present, bit 0 gets always set to
1. For example, A83T has NMP PLLs modelled as NKMP PLL without K. Since
K is not specified, it's offset, width and shift is 0. Driver assumes
that lowest value possible is 1, otherwise we would get division by 0.
That situation causes that bit 0 is always set, which may change wanted
clock rate.

Fix that by masking every factor according to it's specified width.
Factors with width set to 0 won't have any influence to final register
value.

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
 2018-02-15 14:40:19 +01:00
Stephen Boyd de000a88c1 Allwinner clock changes, take 2 
A few minor bug and comment fixes, plus some fixes for the PRCM CCU driver
 merged in the prior pull request
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJY+G2RAAoJEBx+YmzsjxAgIgoP/jkK2DQ7SfrS60dFSSu8zllD
 wm2mBmcmU+qnkMkc5YWls/5Wfq37K4TZrA1/ZJUr9QsWj89iafmmHQVpWV3/2LpK
 3afV9FjRRZONhy9ThRj+DCZg9WSvo73VSNrOXiZKTEVufi8crKCcG2g59p86KyfO
 obTE7Lrl72wqRE+j+KNnIBiCj+rVE6vGrGY5p2ZE/N8VecveJ8Zje03lNL1Jyj+Z
 +rLkQCk4j2DKAKUaaIf+NMQ7L5iT7ePkFPP/yFa3/mpd1Emqp5Kq3cIDxV4Zh+c/
 DwtMBqGbabSvHFeokK9IvEYuTdQidREN/R7uWSLgcWcr1om6es7FD41pVF0FIaAN
 AYgRfIR3RTOXFbPJt8YQrvV/Xg7yQRweEqlKI6sAC4lVI9yzKQAdAoXTM50AotYS
 jB0inoNXg07oQxXrcBaFlcKwsIFOS8k9YWH6NXbofi9/FBswuafgXcZxXKoaNDDU
 K+q2bMG2qlMKTgDV44B8ylbdQISCIrPfreqGkYLRfmZx6iPq79nwdd2Wp+GDZ8sk
 jX+a8UFVdP9194Xk9ZGA/BGIgRTz1OeJtQH2mWmLheGoQjL2lcdriCtUQ+35Yuzd
 caONPr38gvmoixKaWdlqwdurmWvEy8xMvN+r+G9BM855yZMh4ue372xQbGTG4h+d
 sOU4mINfk9z8cZ5UgMdx
 =Gi2w
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-clk-for-4.12-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into HEAD

Pull Allwinner clock changes, take 2 from Maxime Ripard:

A few minor bug and comment fixes, plus some fixes for the PRCM CCU driver
merged in the prior pull request

* tag 'sunxi-clk-for-4.12-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  clk: sunxi-ng: a80: Fix audio PLL comment not matching actual code
  clk: sunxi-ng: Fix round_rate/set_rate multiplier minimum mismatch
  clk: sunxi-ng: use 1 as fallback for minimum multiplier
  clk: sunxi-ng: fix PRCM CCU CLK_NUMBER value
  clk: sunxi-ng: fix PRCM CCU ir clk parent
 2017-04-21 19:19:46 -07:00
Chen-Yu Tsai 95ad8ed9c8 clk: sunxi-ng: Fix round_rate/set_rate multiplier minimum mismatch 
In commit 2beaa601c8 ("clk: sunxi-ng: Implement minimum for
multipliers"), the multiplier minimums in the set_rate callback
for NM and NKMP style clocks were not updated.

This patch fixes them to match their round_rate callbacks.

Fixes: 2beaa601c8 ("clk: sunxi-ng: Implement minimum for multipliers")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
 2017-04-13 14:09:28 +02:00
Chen-Yu Tsai 4162c5ce52 clk: sunxi-ng: use 1 as fallback for minimum multiplier 
A zero multiplier does not make sense for clocks.

Use 1 as the minimum when a multiplier minimum isn't specified.

Fixes: 2beaa601c8 ("clk: sunxi-ng: Implement minimum for multipliers")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
 2017-04-13 14:09:25 +02:00
Icenowy Zheng b467e08a15 clk: sunxi-ng: fix recalc_rate formula of NKMP clocks 
In commit e66f81bbd7 ("clk: sunxi-ng: Implement factors offsets"), the
final formula of NKMP clocks' recalc_rate is refactored; however, the
refactored formula broke the calculation due to some C language operand
priority problem -- the priority of operand >> is lower than * and /,
makes the formula being parsed as "(parent_rate * n * k) >> (p / m)", but
it should be "(parent_rate * n * k >> p) / m".

Add the pair of parentheses to fix up this issue. This pair of
parentheses used to exist in the old formula.

Fixes: e66f81bbd7 ("clk: sunxi-ng: Implement factors offsets")
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
 2017-03-20 10:34:05 +01:00
Maxime Ripard 0c3c8e1358 clk: sunxi-ng: Implement multiplier maximum 
Some multipliers have a maximum rate that is lower than what the register
width allows to. Add a field in the multiplier structure to allow CCU
driver to set that maximum.

Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
 2017-01-23 11:45:01 +01:00
Maxime Ripard e66f81bbd7 clk: sunxi-ng: Implement factors offsets 
The factors we've seen so far all had an offset of one. However, on the
earlier Allwinner SoCs, some factors could have no offset at all, meaning
that the value computed to reach the rate we want to use was the one we had
to program in the registers.

Implement an additional field for the factors that can have such an offset
(linears, not based on a power of two) to specify that offset.

This offset is not linked to the extremums that can be specified in those
structures too. The minimum and maximum are representing the range of
values we can use to try to compute the best rate. The offset comes later
on when we want to set the best value in the registers.

Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
 2017-01-23 11:44:27 +01:00
Maxime Ripard 2beaa601c8 clk: sunxi-ng: Implement minimum for multipliers 
Allow the CCU drivers to specify a multiplier for their clocks.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
 2016-10-25 12:40:25 +02:00
Maxime Ripard 6e0d50daa9 clk: sunxi-ng: Add minimums for all the relevant structures and clocks 
Modify the current clocks we have to be able to specify the minimum for
each clocks we support, just like we support the max.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
 2016-10-25 12:40:23 +02:00
Maxime Ripard ee28648cb2 clk: sunxi-ng: Remove the use of rational computations 
While the rational library works great, it doesn't really allow us to add
more constraints, like the minimum.

Remove that in order to be able to deal with the constraints we'll need.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
 2016-10-25 12:39:25 +02:00
Maxime Ripard 87ba9e5962 clk: sunxi-ng: div: Allow to set a maximum 
Some dividers might have a maximum value that is lower than the width of
the register.

Add a field to _ccu_div to handle those case properly. If the field is set
to 0, the code will assume that the maximum value is the maximum one that
can be used with the field register width.

Otherwise, we'll use whatever value has been set.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
 2016-09-10 11:41:18 +02:00
Maxime Ripard 4f728b5db7 clk: sunxi-ng: Add N-K-M-P factor clock 
Introduce support for clocks that use a combination of two linear
multipliers (N and K factors), one linear divider (M) and one power of two
divider (P).

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20160629190535.11855-13-maxime.ripard@free-electrons.com
 2016-07-08 18:05:06 -07:00