If we get ELF file with "maps" section, but no symbols pointing to it, we'll
end up with division by zero. Add check against this situation and exit early
with error. Found by Coverity scan against Github libbpf sources.
Fixes: bf82927125 ("libbpf: refactor map initialization")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-6-andriin@fb.com
Perform size check always in btf__resolve_size. Makes the logic a bit more
robust against corrupted BTF and silences LGTM/Coverity complaining about
always true (size < 0) check.
Fixes: 69eaab04c6 ("btf: extract BTF type size calculation")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-5-andriin@fb.com
Fix a potential overflow issue found by LGTM analysis, based on Github libbpf
source code.
Fixes: 3d65014146 ("bpf: libbpf: Add btf_line_info support to libbpf")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-3-andriin@fb.com
Coverity scan against Github libbpf code found the issue of not freeing memory and
leaving already freed memory still referenced from bpf_program. Fix it by
re-assigning successfully reallocated memory sooner.
Fixes: 2993e0515b ("tools/bpf: add support to read .BTF.ext sections")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-2-andriin@fb.com
Fix issue reported by static analysis (Coverity). If bpf_prog_get_fd_by_id()
fails, xsk_lookup_bpf_maps() will fail as well and clean-up code will attempt
close() with fd=-1. Fix by checking bpf_prog_get_fd_by_id() return result and
exiting early.
Fixes: 10a13bb40e ("libbpf: remove qidconf and better support external bpf programs.")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107054059.313884-1-andriin@fb.com
Streamline BPF_CORE_READ_BITFIELD_PROBED interface to follow
BPF_CORE_READ_BITFIELD (direct) and BPF_CORE_READ, in general, i.e., just
return read result or 0, if underlying bpf_probe_read() failed.
In practice, real applications rarely check bpf_probe_read() result, because
it has to always work or otherwise it's a bug. So propagating internal
bpf_probe_read() error from this macro hurts usability without providing real
benefits in practice. This patch fixes the issue and simplifies usage,
noticeable even in selftest itself.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191106201500.2582438-1-andriin@fb.com
When a 'make DEBUG=1' build is done, the command parser is still built
with -O6 and is hard to step through, fix it making it use -O0 in that
case.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: nd <nd@arm.com>
Link: http://lore.kernel.org/lkml/20191028113340.4282-1-james.clark@arm.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move EXTRA_WARNINGS and EXTRA_FLAGS to the end of the compilation line,
otherwise they cannot be used to override the default values.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: nd <nd@arm.com>
Link: http://lore.kernel.org/lkml/20191028113340.4282-1-james.clark@arm.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add bpf_core_field_size() macro, capturing a relocation against field size.
Adjust bits of internal libbpf relocation logic to allow capturing size
relocations of various field types: arrays, structs/unions, enums, etc.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191101222810.1246166-4-andriin@fb.com
Add support for the new field relocation kinds, necessary to support
relocatable bitfield reads. Provide macro for abstracting necessary code doing
full relocatable bitfield extraction into u64 value. Two separate macros are
provided:
- BPF_CORE_READ_BITFIELD macro for direct memory read-enabled BPF programs
(e.g., typed raw tracepoints). It uses direct memory dereference to extract
bitfield backing integer value.
- BPF_CORE_READ_BITFIELD_PROBED macro for cases where bpf_probe_read() needs
to be used to extract same backing integer value.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191101222810.1246166-3-andriin@fb.com
This adds support to libbpf for setting map pinning information as part of
the BTF map declaration, to get automatic map pinning (and reuse) on load.
The pinning type currently only supports a single PIN_BY_NAME mode, where
each map will be pinned by its name in a path that can be overridden, but
defaults to /sys/fs/bpf.
Since auto-pinning only does something if any maps actually have a
'pinning' BTF attribute set, we default the new option to enabled, on the
assumption that seamless pinning is what most callers want.
When a map has a pin_path set at load time, libbpf will compare the map
pinned at that location (if any), and if the attributes match, will re-use
that map instead of creating a new one. If no existing map is found, the
newly created map will instead be pinned at the location.
Programs wanting to customise the pinning can override the pinning paths
using bpf_map__set_pin_path() before calling bpf_object__load() (including
setting it to NULL to disable pinning of a particular map).
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269298092.394725.3966306029218559681.stgit@toke.dk
The existing pin_*() functions all try to create the parent directory
before pinning. Move this check into the per-object _pin() functions
instead. This ensures consistent behaviour when auto-pinning is
added (which doesn't go through the top-level pin_maps() function), at the
cost of a few more calls to mkdir().
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269297985.394725.5882630952992598610.stgit@toke.dk
Support storing and setting a pin path in struct bpf_map, which can be used
for automatic pinning. Also store the pin status so we can avoid attempts
to re-pin a map that has already been pinned (or reused from a previous
pinning).
The behaviour of bpf_object__{un,}pin_maps() is changed so that if it is
called with a NULL path argument (which was previously illegal), it will
(un)pin only those maps that have a pin_path set.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269297876.394725.14782206533681896279.stgit@toke.dk
bpf_map__reuse_fd() was calling close() in the error path before returning
an error value based on errno. However, close can change errno, so that can
lead to potentially misleading error messages. Instead, explicitly store
errno in the err variable before each goto.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269297769.394725.12634985106772698611.stgit@toke.dk
u32 is a kernel-side typedef. User-space library is supposed to use __u32.
This breaks Github's projection of libbpf. Do u32 -> __u32 fix.
Fixes: 94ff9ebb49 ("libbpf: Fix compatibility for kernels without need_wakeup")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20191029055953.2461336-1-andriin@fb.com
libbpf's bpf_object__elf_collect() does simple sanity check after iterating
over all ELF sections, if checks that .strtab index is correct. Unfortunately,
due to section indices being 1-based, the check breaks for cases when .strtab
ends up being the very last section in ELF.
Fixes: 77ba9a5b48 ("tools lib bpf: Fetch map names from correct strtab")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191028233727.1286699-1-andriin@fb.com
When the need_wakeup flag was added to AF_XDP, the format of the
XDP_MMAP_OFFSETS getsockopt was extended. Code was added to the
kernel to take care of compatibility issues arrising from running
applications using any of the two formats. However, libbpf was
not extended to take care of the case when the application/libbpf
uses the new format but the kernel only supports the old
format. This patch adds support in libbpf for parsing the old
format, before the need_wakeup flag was added, and emulating a
set of static need_wakeup flags that will always work for the
application.
v2 -> v3:
* Incorporated code improvements suggested by Jonathan Lemon
v1 -> v2:
* Rebased to bpf-next
* Rewrote the code as the previous version made you blind
Fixes: a4500432c2 ("libbpf: add support for need_wakeup flag in AF_XDP part")
Reported-by: Eloy Degen <degeneloy@gmail.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1571995035-21889-1-git-send-email-magnus.karlsson@intel.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-10-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 52 non-merge commits during the last 11 day(s) which contain
a total of 65 files changed, 2604 insertions(+), 1100 deletions(-).
The main changes are:
1) Revolutionize BPF tracing by using in-kernel BTF to type check BPF
assembly code. The work here teaches BPF verifier to recognize
kfree_skb()'s first argument as 'struct sk_buff *' in tracepoints
such that verifier allows direct use of bpf_skb_event_output() helper
used in tc BPF et al (w/o probing memory access) that dumps skb data
into perf ring buffer. Also add direct loads to probe memory in order
to speed up/replace bpf_probe_read() calls, from Alexei Starovoitov.
2) Big batch of changes to improve libbpf and BPF kselftests. Besides
others: generalization of libbpf's CO-RE relocation support to now
also include field existence relocations, revamp the BPF kselftest
Makefile to add test runner concept allowing to exercise various
ways to build BPF programs, and teach bpf_object__open() and friends
to automatically derive BPF program type/expected attach type from
section names to ease their use, from Andrii Nakryiko.
3) Fix deadlock in stackmap's build-id lookup on rq_lock(), from Song Liu.
4) Allow to read BTF as raw data from bpftool. Most notable use case
is to dump /sys/kernel/btf/vmlinux through this, from Jiri Olsa.
5) Use bpf_redirect_map() helper in libbpf's AF_XDP helper prog which
manages to improve "rx_drop" performance by ~4%., from Björn Töpel.
6) Fix to restore the flow dissector after reattach BPF test and also
fix error handling in bpf_helper_defs.h generation, from Jakub Sitnicki.
7) Improve verifier's BTF ctx access for use outside of raw_tp, from
Martin KaFai Lau.
8) Improve documentation for AF_XDP with new sections and to reflect
latest features, from Magnus Karlsson.
9) Add back 'version' section parsing to libbpf for old kernels, from
John Fastabend.
10) Fix strncat bounds error in libbpf's libbpf_prog_type_by_name(),
from KP Singh.
11) Turn on -mattr=+alu32 in LLVM by default for BPF kselftests in order
to improve insn coverage for built BPF progs, from Yonghong Song.
12) Misc minor cleanups and fixes, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On compiling samples with this change, one gets an error:
error: ‘strncat’ specified bound 118 equals destination size
[-Werror=stringop-truncation]
strncat(dst, name + section_names[i].len,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(raw_tp_btf_name) - (dst - raw_tp_btf_name));
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
strncat requires the destination to have enough space for the
terminating null byte.
Fixes: f75a697e09 ("libbpf: Auto-detect btf_id of BTF-based raw_tracepoint")
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191023154038.24075-1-kpsingh@chromium.org
In commit 43e74c0267 ("bpf_xdp_redirect_map: Perform map lookup in
eBPF helper") the bpf_redirect_map() helper learned to do map lookup,
which means that the explicit lookup in the XDP program for AF_XDP is
not needed for post-5.3 kernels.
This commit adds the implicit map lookup with default action, which
improves the performance for the "rx_drop" [1] scenario with ~4%.
For pre-5.3 kernels, the bpf_redirect_map() returns XDP_ABORTED, and a
fallback path for backward compatibility is entered, where explicit
lookup is still performed. This means a slight regression for older
kernels (an additional bpf_redirect_map() call), but I consider that a
fair punishment for users not upgrading their kernels. ;-)
v1->v2: Backward compatibility (Toke) [2]
v2->v3: Avoid masking/zero-extension by using JMP32 [3]
[1] # xdpsock -i eth0 -z -r
[2] https://lore.kernel.org/bpf/87pnirb3dc.fsf@toke.dk/
[3] https://lore.kernel.org/bpf/87v9sip0i8.fsf@toke.dk/
Suggested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191022072206.6318-1-bjorn.topel@gmail.com
LIBBPF_OPTS is implemented as a mix of field declaration and memset
+ assignment. This makes it neither variable declaration nor purely
statements, which is a problem, because you can't mix it with either
other variable declarations nor other function statements, because C90
compiler mode emits warning on mixing all that together.
This patch changes LIBBPF_OPTS into a strictly declaration of variable
and solves this problem, as can be seen in case of bpftool, which
previously would emit compiler warning, if done this way (LIBBPF_OPTS as
part of function variables declaration block).
This patch also renames LIBBPF_OPTS into DECLARE_LIBBPF_OPTS to follow
kernel convention for similar macros more closely.
v1->v2:
- rename LIBBPF_OPTS into DECLARE_LIBBPF_OPTS (Jakub Sitnicki).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191022172100.3281465-1-andriin@fb.com
Teach bpf_object__open how to guess program type and expected attach
type from section names, similar to what bpf_prog_load() does. This
seems like a really useful features and an oversight to not have this
done during bpf_object_open(). To preserver backwards compatible
behavior of bpf_prog_load(), its attr->prog_type is treated as an
override of bpf_object__open() decisions, if attr->prog_type is not
UNSPECIFIED.
There is a slight difference in behavior for bpf_prog_load().
Previously, if bpf_prog_load() was loading BPF object with more than one
program, first program's guessed program type and expected attach type
would determine corresponding attributes of all the subsequent program
types, even if their sections names suggest otherwise. That seems like
a rather dubious behavior and with this change it will behave more
sanely: each program's type is determined individually, unless they are
forced to uniformity through attr->prog_type.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-5-andriin@fb.com
Map uprobe/uretprobe into KPROBE program type. tp/raw_tp are just an
alias for more verbose tracepoint/raw_tracepoint, respectively.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-4-andriin@fb.com
There are bpf_program__set_type() and
bpf_program__set_expected_attach_type(), but no corresponding getters,
which seems rather incomplete. Fix this.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191021033902.3856966-3-andriin@fb.com
For kernel logging macros, pr_warning() is completely removed and
replaced by pr_warn(). By using pr_warn() in tools/lib/bpf/ for
symmetry to kernel logging macros, we could eventually drop the
use of pr_warning() in the whole kernel tree.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191021055532.185245-1-wangkefeng.wang@huawei.com
Don't generate a broken bpf_helper_defs.h header if the helper script needs
updating because it doesn't recognize a newly added type. Instead print an
error that explains why the build is failing, clean up the partially
generated header and stop.
v1->v2:
- Switched from temporary file to .DELETE_ON_ERROR.
Fixes: 456a513bb5 ("scripts/bpf: Emit an #error directive known types list needs updating")
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191020112344.19395-1-jakub@cloudflare.com
Pull networking fixes from David Miller:
"I was battling a cold after some recent trips, so quite a bit piled up
meanwhile, sorry about that.
Highlights:
1) Fix fd leak in various bpf selftests, from Brian Vazquez.
2) Fix crash in xsk when device doesn't support some methods, from
Magnus Karlsson.
3) Fix various leaks and use-after-free in rxrpc, from David Howells.
4) Fix several SKB leaks due to confusion of who owns an SKB and who
should release it in the llc code. From Eric Biggers.
5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet.
6) Jumbo packets don't work after resume on r8169, as the BIOS resets
the chip into non-jumbo mode during suspend. From Heiner Kallweit.
7) Corrupt L2 header during MPLS push, from Davide Caratti.
8) Prevent possible infinite loop in tc_ctl_action, from Eric
Dumazet.
9) Get register bits right in bcmgenet driver, based upon chip
version. From Florian Fainelli.
10) Fix mutex problems in microchip DSA driver, from Marek Vasut.
11) Cure race between route lookup and invalidation in ipv4, from Wei
Wang.
12) Fix performance regression due to false sharing in 'net'
structure, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits)
net: reorder 'struct net' fields to avoid false sharing
net: dsa: fix switch tree list
net: ethernet: dwmac-sun8i: show message only when switching to promisc
net: aquantia: add an error handling in aq_nic_set_multicast_list
net: netem: correct the parent's backlog when corrupted packet was dropped
net: netem: fix error path for corrupted GSO frames
macb: propagate errors when getting optional clocks
xen/netback: fix error path of xenvif_connect_data()
net: hns3: fix mis-counting IRQ vector numbers issue
net: usb: lan78xx: Connect PHY before registering MAC
vsock/virtio: discard packets if credit is not respected
vsock/virtio: send a credit update when buffer size is changed
mlxsw: spectrum_trap: Push Ethernet header before reporting trap
net: ensure correct skb->tstamp in various fragmenters
net: bcmgenet: reset 40nm EPHY on energy detect
net: bcmgenet: soft reset 40nm EPHYs before MAC init
net: phy: bcm7xxx: define soft_reset for 40nm EPHY
net: bcmgenet: don't set phydev->link from MAC
net: Update address for MediaTek ethernet driver in MAINTAINERS
ipv4: fix race condition between route lookup and invalidation
...
With commit "libbpf: stop enforcing kern_version,..." we removed the
kernel version section parsing in favor of querying for the kernel
using uname() and populating the version using the result of the
query. After this any version sections were simply ignored.
Unfortunately, the world of kernels is not so friendly. I've found some
customized kernels where uname() does not match the in kernel version.
To fix this so programs can load in this environment this patch adds
back parsing the section and if it exists uses the user specified
kernel version to override the uname() result. However, keep most the
kernel uname() discovery bits so users are not required to insert the
version except in these odd cases.
Fixes: 5e61f27070 ("libbpf: stop enforcing kern_version, populate it for users")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157140968634.9073.6407090804163937103.stgit@john-XPS-13-9370
For kernel logging macro, pr_warning is completely removed and
replaced by pr_warn, using pr_warn in tools lib api for symmetry
to kernel logging macro, then we could drop pr_warning in the
whole linux code.
Changing __pr_warning to __pr_warn to be consistent.
Link: http://lkml.kernel.org/r/20191018031850.48498-30-wangkefeng.wang@huawei.com
To: linux-kernel@vger.kernel.org
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
It's a responsiblity of bpf program author to annotate the program
with SEC("tp_btf/name") where "name" is a valid raw tracepoint.
The libbpf will try to find "name" in vmlinux BTF and error out
in case vmlinux BTF is not available or "name" is not found.
If "name" is indeed a valid raw tracepoint then in-kernel BTF
will have "btf_trace_##name" typedef that points to function
prototype of that raw tracepoint. BTF description captures
exact argument the kernel C code is passing into raw tracepoint.
The kernel verifier will check the types while loading bpf program.
libbpf keeps BTF type id in expected_attach_type, but since
kernel ignores this attribute for tracing programs copy it
into attach_btf_id attribute before loading.
Later the kernel will use prog->attach_btf_id to select raw tracepoint
during bpf_raw_tracepoint_open syscall command.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191016032505.2089704-6-ast@kernel.org
Add enum definition for Clang's __builtin_preserve_field_info()
second argument (info_kind). Currently only byte offset and existence
are supported. Corresponding Clang changes introducing this built-in can
be found at [0]
[0] https://reviews.llvm.org/D67980
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-5-andriin@fb.com
Add support for BPF_FRK_EXISTS relocation kind to detect existence of
captured field in a destination BTF, allowing conditional logic to
handle incompatible differences between kernels.
Also introduce opt-in relaxed CO-RE relocation handling option, which
makes libbpf emit warning for failed relocations, but proceed with other
relocations. Instruction, for which relocation failed, is patched with
(u32)-1 value.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-4-andriin@fb.com
Refactor all the various bpf_object__open variations to ultimately
specify common bpf_object_open_opts struct. This makes it easy to keep
extending this common struct w/ extra parameters without having to
update all the legacy APIs.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-3-andriin@fb.com
BTF offset reloc was generalized in recent Clang into field relocation,
capturing extra u32 field, specifying what aspect of captured field
needs to be relocated. This changes .BTF.ext's record size for this
relocation from 12 bytes to 16 bytes. Given these format changes
happened in Clang before official released version, it's ok to not
support outdated 12-byte record size w/o breaking ABI.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-2-andriin@fb.com
In case of C/LDFLAGS there is no way to pass them correctly to build
command, for instance when --sysroot is used or external libraries
are used, like -lelf, wich can be absent in toolchain. This can be
used for samples/bpf cross-compiling allowing to get elf lib from
sysroot.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-13-ivan.khoronzhuk@linaro.org
No need to use C++ for test_libbpf target when libbpf is on C and it
can be tested with C, after this change the CXXFLAGS in makefiles can
be avoided, at least in bpf samples, when sysroot is used, passing
same C/LDFLAGS as for lib.
Add "return 0" in test_libbpf to avoid warn, but also remove spaces at
start of the lines to keep same style and avoid warns while apply.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-12-ivan.khoronzhuk@linaro.org
Old GCC versions are producing invalid typedef for __gnuc_va_list
pointing to void. Special-case this and emit valid:
typedef __builtin_va_list __gnuc_va_list;
Reported-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191011032901.452042-1-andriin@fb.com
Existing BPF_CORE_READ() macro generates slightly suboptimal code. If
there are intermediate pointers to be read, initial source pointer is
going to be assigned into a temporary variable and then temporary
variable is going to be uniformly used as a "source" pointer for all
intermediate pointer reads. Schematically (ignoring all the type casts),
BPF_CORE_READ(s, a, b, c) is expanded into:
({
const void *__t = src;
bpf_probe_read(&__t, sizeof(*__t), &__t->a);
bpf_probe_read(&__t, sizeof(*__t), &__t->b);
typeof(s->a->b->c) __r;
bpf_probe_read(&__r, sizeof(*__r), &__t->c);
})
This initial `__t = src` makes calls more uniform, but causes slightly
less optimal register usage sometimes when compiled with Clang. This can
cascase into, e.g., more register spills.
This patch fixes this issue by generating more optimal sequence:
({
const void *__t;
bpf_probe_read(&__t, sizeof(*__t), &src->a); /* <-- src here */
bpf_probe_read(&__t, sizeof(*__t), &__t->b);
typeof(s->a->b->c) __r;
bpf_probe_read(&__r, sizeof(*__r), &__t->c);
})
Fixes: 7db3822ab9 ("libbpf: Add BPF_CORE_READ/BPF_CORE_READ_INTO helpers")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191011023847.275936-1-andriin@fb.com
'struct xdp_umem_reg' has 4 bytes of padding at the end that makes
valgrind complain about passing uninitialized stack memory to the
syscall:
Syscall param socketcall.setsockopt() points to uninitialised byte(s)
at 0x4E7AB7E: setsockopt (in /usr/lib64/libc-2.29.so)
by 0x4BDE035: xsk_umem__create@@LIBBPF_0.0.4 (xsk.c:172)
Uninitialised value was created by a stack allocation
at 0x4BDDEBA: xsk_umem__create@@LIBBPF_0.0.4 (xsk.c:140)
Padding bytes appeared after introducing of a new 'flags' field.
memset() is required to clear them.
Fixes: 10d30e3017 ("libbpf: add flags to umem config")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191009164929.17242-1-i.maximets@ovn.org
Fix a case where explicit padding at the end of a struct is necessary
due to non-standart alignment requirements of fields (which BTF doesn't
capture explicitly).
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Reported-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191008231009.2991130-2-andriin@fb.com
Add few macros simplifying BCC-like multi-level probe reads, while also
emitting CO-RE relocations for each read.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191008175942.1769476-7-andriin@fb.com
Move bpf_helpers.h, bpf_tracing.h, and bpf_endian.h into libbpf. Move
bpf_helper_defs.h generation into libbpf's Makefile. Ensure all those
headers are installed along the other libbpf headers. Also, adjust
selftests and samples include path to include libbpf now.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191008175942.1769476-6-andriin@fb.com
perf script:
Andi Kleen:
- Fix recovery from LBR/binary mismatch in the "brstackinsn" --field.
perf annotate:
Arnaldo Carvalho de Melo:
- Propagate errors so that meaningful messages can be presented to the
user in case of problems.
perf map:
Steve MacLean:
- Fix handling of maps partially overlapped, resolving symbols in the
ranges not replaced by new mmaps.
perf tests:
Ian Rogers:
- Use raise() instead of NULL derefs to avoid causing a SIGILL rather than a
SIGSEGV for optimized builds that turn NULL derefs into ud2 instructions.
perf LLVM:
Ian Rogers:
- Don't access out-of-scope array.
perf inject:
Steve MacLean:
- Fix JIT_CODE_MOVE filename, that was having a u64 truncaded into a 32-bit
snprintf format and also a missing ".so" suffix in another case.
libsubcmd:
Ian Rogers:
- Make _FORTIFY_SOURCE defines dependent on the feature, avoiding
false positives with with memory sanitizers such as LLVM's ASan.
Vendor specific events:
Intel:
Andi Kleen:
- Fix period for Intel fixed counters.
s390:
Thomas Richter (2):
- Fix some event details transaction for machine type 8561.
tools headers UAPI:
Arnaldo Carvalho de Melo:
- Sync headers with the kernel, catching new usbdevfs ioctls and
madvise behaviours to properly decode in 'perf trace' output.
Documentation:
Steve MacLean:
- Correct and clarify jitdump spec.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXZMyWQAKCRCyPKLppCJ+
Jz0qAQC9lZQrWR+Q5S1rXbp5x45+mIji7Q8UK5pyzhpLRAOYNwD/cR6v6TCE96lE
a2hCqV+gV+pbc70Bw5H7TN+kVOtGaQE=
=wcfs
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.4-20191001' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf script:
Andi Kleen:
- Fix recovery from LBR/binary mismatch in the "brstackinsn" --field.
perf annotate:
Arnaldo Carvalho de Melo:
- Propagate errors so that meaningful messages can be presented to the
user in case of problems.
perf map:
Steve MacLean:
- Fix handling of maps partially overlapped, resolving symbols in the
ranges not replaced by new mmaps.
perf tests:
Ian Rogers:
- Use raise() instead of NULL derefs to avoid causing a SIGILL rather than a
SIGSEGV for optimized builds that turn NULL derefs into ud2 instructions.
perf LLVM:
Ian Rogers:
- Don't access out-of-scope array.
perf inject:
Steve MacLean:
- Fix JIT_CODE_MOVE filename, that was having a u64 truncaded into a 32-bit
snprintf format and also a missing ".so" suffix in another case.
libsubcmd:
Ian Rogers:
- Make _FORTIFY_SOURCE defines dependent on the feature, avoiding
false positives with with memory sanitizers such as LLVM's ASan.
Vendor specific events:
Intel:
Andi Kleen:
- Fix period for Intel fixed counters.
s390:
Thomas Richter (2):
- Fix some event details transaction for machine type 8561.
tools headers UAPI:
Arnaldo Carvalho de Melo:
- Sync headers with the kernel, catching new usbdevfs ioctls and
madvise behaviours to properly decode in 'perf trace' output.
Documentation:
Steve MacLean:
- Correct and clarify jitdump spec.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Using cscope and/or TAGS files for navigating the source code is useful.
Add simple targets to the Makefile to generate the index files for both
tools.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191004153444.1711278-1-toke@redhat.com
Add new set of bpf_object__open APIs using new approach to optional
parameters extensibility allowing simpler ABI compatibility approach.
This patch demonstrates an approach to implementing libbpf APIs that
makes it easy to extend existing APIs with extra optional parameters in
such a way, that ABI compatibility is preserved without having to do
symbol versioning and generating lots of boilerplate code to handle it.
To facilitate succinct code for working with options, add OPTS_VALID,
OPTS_HAS, and OPTS_GET macros that hide all the NULL, size, and zero
checks.
Additionally, newly added libbpf APIs are encouraged to follow similar
pattern of having all mandatory parameters as formal function parameters
and always have optional (NULL-able) xxx_opts struct, which should
always have real struct size as a first field and the rest would be
optional parameters added over time, which tune the behavior of existing
API, if specified by user.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kernel version enforcement for kprobes/kretprobes was removed from
5.0 kernel in 6c4fc209fc ("bpf: remove useless version check for prog load").
Since then, BPF programs were specifying SEC("version") just to please
libbpf. We should stop enforcing this in libbpf, if even kernel doesn't
care. Furthermore, libbpf now will pre-populate current kernel version
of the host system, in case we are still running on old kernel.
This patch also removes __bpf_object__open_xattr from libbpf.h, as
nothing in libbpf is relying on having it in that header. That function
was never exported as LIBBPF_API and even name suggests its internal
version. So this should be safe to remove, as it doesn't break ABI.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
New release cycle started, let's bump to v0.0.6 proactively.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20190930222503.519782-1-andriin@fb.com
bcc uses libbpf repo as a submodule. It brings in libbpf source
code and builds everything together to produce shared libraries.
With latest libbpf, I got the following errors:
/bin/ld: libbcc_bpf.so.0.10.0: version node not found for symbol xsk_umem__create@LIBBPF_0.0.2
/bin/ld: failed to set dynamic section sizes: Bad value
collect2: error: ld returned 1 exit status
make[2]: *** [src/cc/libbcc_bpf.so.0.10.0] Error 1
In xsk.c, we have
asm(".symver xsk_umem__create_v0_0_2, xsk_umem__create@LIBBPF_0.0.2");
asm(".symver xsk_umem__create_v0_0_4, xsk_umem__create@@LIBBPF_0.0.4");
The linker thinks the built is for LIBBPF but cannot find proper version
LIBBPF_0.0.2/4, so emit errors.
I also confirmed that using libbpf.a to produce a shared library also
has issues:
-bash-4.4$ cat t.c
extern void *xsk_umem__create;
void * test() { return xsk_umem__create; }
-bash-4.4$ gcc -c -fPIC t.c
-bash-4.4$ gcc -shared t.o libbpf.a -o t.so
/bin/ld: t.so: version node not found for symbol xsk_umem__create@LIBBPF_0.0.2
/bin/ld: failed to set dynamic section sizes: Bad value
collect2: error: ld returned 1 exit status
-bash-4.4$
Symbol versioning does happens in commonly used libraries, e.g., elfutils
and glibc. For static libraries, for a versioned symbol, the old definitions
will be ignored, and the symbol will be an alias to the latest definition.
For example, glibc sched_setaffinity is versioned.
-bash-4.4$ readelf -s /usr/lib64/libc.so.6 | grep sched_setaffinity
756: 000000000013d3d0 13 FUNC GLOBAL DEFAULT 13 sched_setaffinity@GLIBC_2.3.3
757: 00000000000e2e70 455 FUNC GLOBAL DEFAULT 13 sched_setaffinity@@GLIBC_2.3.4
1800: 0000000000000000 0 FILE LOCAL DEFAULT ABS sched_setaffinity.c
4228: 00000000000e2e70 455 FUNC LOCAL DEFAULT 13 __sched_setaffinity_new
4648: 000000000013d3d0 13 FUNC LOCAL DEFAULT 13 __sched_setaffinity_old
7338: 000000000013d3d0 13 FUNC GLOBAL DEFAULT 13 sched_setaffinity@GLIBC_2
7380: 00000000000e2e70 455 FUNC GLOBAL DEFAULT 13 sched_setaffinity@@GLIBC_
-bash-4.4$
For static library, the definition of sched_setaffinity aliases to the new definition.
-bash-4.4$ readelf -s /usr/lib64/libc.a | grep sched_setaffinity
File: /usr/lib64/libc.a(sched_setaffinity.o)
8: 0000000000000000 455 FUNC GLOBAL DEFAULT 1 __sched_setaffinity_new
12: 0000000000000000 455 FUNC WEAK DEFAULT 1 sched_setaffinity
For both elfutils and glibc, additional macros are used to control different handling
of symbol versioning w.r.t static and shared libraries.
For elfutils, the macro is SYMBOL_VERSIONING
(https://sourceware.org/git/?p=elfutils.git;a=blob;f=lib/eu-config.h).
For glibc, the macro is SHARED
(https://sourceware.org/git/?p=glibc.git;a=blob;f=include/shlib-compat.h;hb=refs/heads/master)
This patch used SHARED as the macro name. After this patch, the libbpf.a has
-bash-4.4$ readelf -s libbpf.a | grep xsk_umem__create
372: 0000000000017145 1190 FUNC GLOBAL DEFAULT 1 xsk_umem__create_v0_0_4
405: 0000000000017145 1190 FUNC GLOBAL DEFAULT 1 xsk_umem__create
499: 00000000000175eb 103 FUNC GLOBAL DEFAULT 1 xsk_umem__create_v0_0_2
-bash-4.4$
No versioned symbols for xsk_umem__create.
The libbpf.a can be used to build a shared library succesfully.
-bash-4.4$ cat t.c
extern void *xsk_umem__create;
void * test() { return xsk_umem__create; }
-bash-4.4$ gcc -c -fPIC t.c
-bash-4.4$ gcc -shared t.o libbpf.a -o t.so
-bash-4.4$
Fixes: 10d30e3017 ("libbpf: add flags to umem config")
Cc: Kevin Laatz <kevin.laatz@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
make TARGETS=bpf kselftest fails with:
Makefile:127: tools/build/Makefile.include: No such file or directory
When the bpf tool make is invoked from tools Makefile, srctree is
cleared and the current logic check for srctree equals to empty
string to determine srctree location from CURDIR.
When the build in invoked from selftests/bpf Makefile, the srctree
is set to "." and the same logic used for srctree equals to empty is
needed to determine srctree.
Check building_out_of_srctree undefined as the condition for both
cases to fix "make TARGETS=bpf kselftest" build failure.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20190927011344.4695-1-skhan@linuxfoundation.org
Pull networking fixes from David Miller:
1) Sanity check URB networking device parameters to avoid divide by
zero, from Oliver Neukum.
2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
don't work properly. Longer term this needs a better fix tho. From
Vijay Khemka.
3) Small fixes to selftests (use ping when ping6 is not present, etc.)
from David Ahern.
4) Bring back rt_uses_gateway member of struct rtable, it's semantics
were not well understood and trying to remove it broke things. From
David Ahern.
5) Move usbnet snaity checking, ignore endpoints with invalid
wMaxPacketSize. From Bjørn Mork.
6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.
7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
Alex Vesker, and Yevgeny Kliteynik
8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.
9) Fix crash when removing sch_cbs entry while offloading is enabled,
from Vinicius Costa Gomes.
10) Signedness bug fixes, generally in looking at the result given by
of_get_phy_mode() and friends. From Dan Crapenter.
11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.
12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.
13) Fix quantization code in tcp_bbr, from Kevin Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
net: tap: clean up an indentation issue
nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
sk_buff: drop all skb extensions on free and skb scrubbing
tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
Documentation: Clarify trap's description
mlxsw: spectrum: Clear VLAN filters during port initialization
net: ena: clean up indentation issue
NFC: st95hf: clean up indentation issue
net: phy: micrel: add Asym Pause workaround for KSZ9021
net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
ptp: correctly disable flags on old ioctls
lib: dimlib: fix help text typos
net: dsa: microchip: Always set regmap stride to 1
nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
...
Pull more perf updates from Ingo Molnar:
"The only kernel change is comment typo fixes.
The rest is mostly tooling fixes, but also new vendor event additions
and updates, a bigger libperf/libtraceevent library and a header files
reorganization that came in a bit late"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (108 commits)
perf unwind: Fix libunwind build failure on i386 systems
perf parser: Remove needless include directives
perf build: Add detection of java-11-openjdk-devel package
perf jvmti: Include JVMTI support for s390
perf vendor events: Remove P8 HW events which are not supported
perf evlist: Fix access of freed id arrays
perf stat: Fix free memory access / memory leaks in metrics
perf tools: Replace needless mmap.h with what is needed, event.h
perf evsel: Move config terms to a separate header
perf evlist: Remove unused perf_evlist__fprintf() method
perf evsel: Introduce evsel_fprintf.h
perf evsel: Remove need for symbol_conf in evsel_fprintf.c
perf copyfile: Move copyfile routines to separate files
libperf: Add perf_evlist__poll() function
libperf: Add perf_evlist__add_pollfd() function
libperf: Add perf_evlist__alloc_pollfd() function
libperf: Add libperf_init() call to the tests
libperf: Merge libperf_set_print() into libperf_init()
libperf: Add libperf dependency for tests targets
libperf: Use sys/types.h to get ssize_t, not unistd.h
...
BTF-to-C converter previously skipped anonymous enums in an assumption
that those are embedded in struct's field definitions. This is not
always the case and a lot of kernel constants are defined as part of
anonymous enums. This change fixes the logic by eagerly marking all
types as either referenced by any other type or not. This is enough to
distinguish two classes of anonymous enums and emit previously omitted
enum definitions.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20190925203745.3173184-1-andriin@fb.com
As was already noted in rbtree.h, the logic to cache rb_first (or
rb_last) can easily be implemented externally to the core rbtree api.
This commit takes the changes applied to the include/linux/ and lib/
rbtree files in 9f973cb380 ("lib/rbtree: avoid generating code twice
for the cached versions"), and applies these to the
tools/include/linux/ and tools/lib/ files as well to keep them
synchronized.
Link: http://lkml.kernel.org/r/20190703034812.53002-1-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some compilers emit warning for potential uninitialized next_id usage.
The code is correct, but control flow is too complicated for some
compilers to figure this out. Re-initialize next_id to satisfy
compiler.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
All traceevent plugins code is moved to tools/lib/traceevent/plugins
subdirectory. It makes traceevent implementation in trace-cmd and in
kernel tree consistent. There is no changes in the way libtraceevent and
plugins are compiled and installed.
Committer notes:
Applied fixup provided by Steven, fixing the tools/perf/Makefile.perf
target for the plugin dynamic list file. Problem noticed when cross
building to aarch64 from a Ubuntu 19.04 container.
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20190923115929.453b68f1@oasis.local.home
Link: http://lore.kernel.org/lkml/20190919212542.377333393@goodmis.org
Link: http://lore.kernel.org/linux-trace-devel/20190917105055.18983-1-tz.stoyanov@gmail.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tep_get_event() function is an official libtracevent API, described
in the library man pages. However, it cannot be used by the library users because
it is not declared in the event-parse.h file, where all libtracevent APIs are.
The function declaration is added in event-parse.h file.
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/linux-trace-devel/20190808113721.13539-1-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190919212542.058025937@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
APIs for printing various trace event information were redesigned to be
more simple. However, the main libtraceevent man page was not updated
with those changes. The documentation is updated to describe the new
event print API.
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/linux-trace-devel/20190808113636.13299-3-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190919212541.869643036@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tep_ref_get() was renamed to tep_get_ref(), to be more consistent
with the other tep_ref_* APIs. However, in the man pages the API is
still with the old name. The documentation is fixed to reflect the
actual name of the API.
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/linux-trace-devel/20190808113636.13299-2-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190919212541.697034573@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When testing the output of the old trace-cmd compared to the one that
uses the updated tep_print_event() logic, it was different in that the
time stamp precision in the old format would round up to the nearest
precision, where as the new logic truncates. Bring back the old method
of rounding up.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: linux trace devel <linux-trace-devel@vger.kernel.org>
Link: http://lore.kernel.org/lkml/20190919165119.5efa5de6@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are no in-kernel %p[fF] users left. Convert the traceevent tool,
too, to align with the kernel.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: devicetree@vger.kernel.org
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20190918133419.7969-2-sakari.ailus@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The xsk_socket__create() function fails and returns an error if it cannot
get the XDP_OPTIONS through getsockopt(). However, support for XDP_OPTIONS
was not added until kernel 5.3, so this means that creating XSK sockets
always fails on older kernels.
Since the option is just used to set the zero-copy flag in the xsk struct,
and that flag is not really used for anything yet, just remove the
getsockopt() call until a proper use for it is introduced.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull networking updates from David Miller:
1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.
2) Use bio_vec in the networking instead of custom skb_frag_t, from
Matthew Wilcox.
3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.
4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.
5) Support all variants of 5750X bnxt_en chips, from Michael Chan.
6) More RTNL avoidance work in the core and mlx5 driver, from Vlad
Buslov.
7) Add TCP syn cookies bpf helper, from Petar Penkov.
8) Add 'nettest' to selftests and use it, from David Ahern.
9) Add extack support to drop_monitor, add packet alert mode and
support for HW drops, from Ido Schimmel.
10) Add VLAN offload to stmmac, from Jose Abreu.
11) Lots of devm_platform_ioremap_resource() conversions, from
YueHaibing.
12) Add IONIC driver, from Shannon Nelson.
13) Several kTLS cleanups, from Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits)
mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
mlxsw: spectrum: Register CPU port with devlink
mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
net: ena: fix incorrect update of intr_delay_resolution
net: ena: fix retrieval of nonadaptive interrupt moderation intervals
net: ena: fix update of interrupt moderation register
net: ena: remove all old adaptive rx interrupt moderation code from ena_com
net: ena: remove ena_restore_ethtool_params() and relevant fields
net: ena: remove old adaptive interrupt moderation code from ena_netdev
net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
net: ena: enable the interrupt_moderation in driver_supported_features
net: ena: reimplement set/get_coalesce()
net: ena: switch to dim algorithm for rx adaptive interrupt moderation
net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
ethtool: implement Energy Detect Powerdown support via phy-tunable
xen-netfront: do not assume sk_buff_head list is empty in error handling
s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
net: ena: don't wake up tx queue when down
drop_monitor: Better sanitize notified packets
...
Daniel Borkmann says:
====================
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add the ability to use unaligned chunks in the AF_XDP umem. By
relaxing where the chunks can be placed, it allows to use an
arbitrary buffer size and place whenever there is a free
address in the umem. Helps more seamless DPDK AF_XDP driver
integration. Support for i40e, ixgbe and mlx5e, from Kevin and
Maxim.
2) Addition of a wakeup flag for AF_XDP tx and fill rings so the
application can wake up the kernel for rx/tx processing which
avoids busy-spinning of the latter, useful when app and driver
is located on the same core. Support for i40e, ixgbe and mlx5e,
from Magnus and Maxim.
3) bpftool fixes for printf()-like functions so compiler can actually
enforce checks, bpftool build system improvements for custom output
directories, and addition of 'bpftool map freeze' command, from Quentin.
4) Support attaching/detaching XDP programs from 'bpftool net' command,
from Daniel.
5) Automatic xskmap cleanup when AF_XDP socket is released, and several
barrier/{read,write}_once fixes in AF_XDP code, from Björn.
6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf
inclusion as well as libbpf versioning improvements, from Andrii.
7) Several new BPF kselftests for verifier precision tracking, from Alexei.
8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya.
9) And more BPF kselftest improvements all over the place, from Stanislav.
10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub.
11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan.
12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni.
13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin.
14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar.
15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari,
Peter, Wei, Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The tep_register_trace_clock() API is used to instruct the traceevent
library how to print the event time stamps. As event print interface if
redesigned, this API is not needed any more. The new event print API is
flexible and the user can specify how the time stamps are printed.
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Patrick McLean <chutzpah@gentoo.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/linux-trace-devel/20190801074959.22023-3-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190805204355.195042846@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Libtraceevent APIs for printing various trace events information are
complicated, there are complex extra parameters. To control the way
event information is printed, the user should call a set of functions in
a specific sequence.
These APIs are reimplemented to provide a more simple interface for
printing event information.
Removed APIs:
tep_print_event_task()
tep_print_event_time()
tep_print_event_data()
tep_event_info()
tep_is_latency_format()
tep_set_latency_format()
tep_data_latency_format()
tep_set_print_raw()
A new API for printing event information is introduced:
void tep_print_event(struct tep_handle *tep, struct trace_seq *s,
struct tep_record *record, const char *fmt, ...);
where "fmt" is a printf-like format string, followed by the event
fields to be printed. Supported fields:
TEP_PRINT_PID, "%d" - event PID
TEP_PRINT_CPU, "%d" - event CPU
TEP_PRINT_COMM, "%s" - event command string
TEP_PRINT_NAME, "%s" - event name
TEP_PRINT_LATENCY, "%s" - event latency
TEP_PRINT_TIME, %d - event time stamp. A divisor and precision
can be specified as part of this format string:
"%precision.divisord". Example:
"%3.1000d" - divide the time by 1000 and print the first 3 digits
before the dot. Thus, the time stamp "123456000" will be printed as
"123.456"
TEP_PRINT_INFO, "%s" - event information.
TEP_PRINT_INFO_RAW, "%s" - event information, in raw format.
Example:
tep_print_event(tep, s, record, "%16s-%-5d [%03d] %s %6.1000d %s %s",
TEP_PRINT_COMM, TEP_PRINT_PID, TEP_PRINT_CPU,
TEP_PRINT_LATENCY, TEP_PRINT_TIME, TEP_PRINT_NAME, TEP_PRINT_INFO);
Output:
ls-11314 [005] d.h. 185207.366383 function __wake_up
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: Patrick McLean <chutzpah@gentoo.org>
Link: http://lore.kernel.org/linux-trace-devel/20190801074959.22023-2-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190805204355.041132030@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a 'flags' field to the umem_config and umem_reg structs.
This will allow for more options to be added for configuring umems.
The first use for the flags field is to add a flag for unaligned chunks
mode. These flags can either be user-provided or filled with a default.
Since we change the size of the xsk_umem_config struct, we need to version
the ABI. This patch includes the ABI versioning for xsk_umem__create. The
Makefile was also updated to handle multiple function versions in
check-abi.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
While reading a trace data file that had 100,000s of tasks, the process
took an extremely long time. I profiled it down to add_new_comm(), which
was doing a qsort() call on an array that was pretty much already sorted
(all but the last element. qsort() isn't very efficient when dealing
with mostly sorted arrays, and this definitely showed its issues.
When adding a new task to the task list, instead of using qsort(), do
another bsearch() with a function that will find the element before
where the new task will be inserted in. Then simply shift the rest of
the array, and insert the task where it belongs.
Fixes: f7d82350e5 ("tools/events: Add files to create libtraceevent.a")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20190828191820.127233764@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the re-allocation of tep->cmdlines succeeds, then the previous
allocation of tep->cmdlines will be freed. If we later fail in
add_new_comm(), we must not free cmdlines, and also should assign
tep->cmdlines to the new allocation. Otherwise when freeing tep, the
tep->cmdlines will be pointing to garbage.
Fixes: a6d2a61ac6 ("tools lib traceevent: Remove some die() calls")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20190828191819.970121417@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Drop __NR_mmap2 fork in flavor of LFS, that is _FILE_OFFSET_BITS=64
(glibc & bionic) / LARGEFILE64_SOURCE (for musl) decision. It allows
mmap() to use 64bit offset that is passed to mmap2 syscall. As result
pgoff is not truncated and no need to use direct access to mmap2 for
32 bits systems.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add an API function taking a BTF object id and providing the id of the
next BTF object in the kernel. This can be used to list all BTF objects
loaded on the system.
v2:
- Rebase on top of Andrii's changes regarding libbpf versioning.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In preparation for the introduction of a similar function for retrieving
the id of the next BTF object, consolidate the code from
bpf_prog_get_next_id() and bpf_map_get_next_id() in libbpf.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The tools/lib/traceevent/Makefile had a test added to it to detect a failure
of the "nm" when making the dynamic list file (whatever that is). The
problem is that the test sorts the values "U W w" and some versions of sort
will place "w" ahead of "W" (even though it has a higher ASCII value, and
break the test.
Add 'tr "w" "W"' to merge the two and not worry about the ordering.
Reported-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michal rarek <mmarek@suse.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 6467753d61 ("tools lib traceevent: Robustify do_generate_dynamic_list_file")
Link: http://lkml.kernel.org/r/20190805130150.25acfeb1@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit adds support for the new need_wakeup flag in AF_XDP. The
xsk_socket__create function is updated to handle this and a new
function is introduced called xsk_ring_prod__needs_wakeup(). This
function can be used by the application to check if Rx and/or Tx
processing needs to be explicitly woken up.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently libbpf version is specified in 2 places: libbpf.map and
Makefile. They easily get out of sync and it's very easy to update one,
but forget to update another one. In addition, Github projection of
libbpf has to maintain its own version which has to be remembered to be
kept in sync manually, which is very error-prone approach.
This patch makes libbpf.map a source of truth for libbpf version and
uses shell invocation to parse out correct full and major libbpf version
to use during build. Now we need to make sure that once new release
cycle starts, we need to add (initially) empty section to libbpf.map
with correct latest version.
This also will make it possible to keep Github projection consistent
with kernel sources version of libbpf by adopting similar parsing of
version from libbpf.map.
v2->v3:
- grep -o + sort -rV (Andrey);
v1->v2:
- eager version vars evaluation (Jakub);
- simplified version regex (Andrey);
Cc: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
The following pull-request contains BPF updates for your *net-next* tree.
There is a small merge conflict in libbpf (Cc Andrii so he's in the loop
as well):
for (i = 1; i <= btf__get_nr_types(btf); i++) {
t = (struct btf_type *)btf__type_by_id(btf, i);
if (!has_datasec && btf_is_var(t)) {
/* replace VAR with INT */
t->info = BTF_INFO_ENC(BTF_KIND_INT, 0, 0);
<<<<<<< HEAD
/*
* using size = 1 is the safest choice, 4 will be too
* big and cause kernel BTF validation failure if
* original variable took less than 4 bytes
*/
t->size = 1;
*(int *)(t+1) = BTF_INT_ENC(0, 0, 8);
} else if (!has_datasec && kind == BTF_KIND_DATASEC) {
=======
t->size = sizeof(int);
*(int *)(t + 1) = BTF_INT_ENC(0, 0, 32);
} else if (!has_datasec && btf_is_datasec(t)) {
>>>>>>> 72ef80b5ee
/* replace DATASEC with STRUCT */
Conflict is between the two commits 1d4126c4e1 ("libbpf: sanitize VAR to
conservative 1-byte INT") and b03bc6853c ("libbpf: convert libbpf code to
use new btf helpers"), so we need to pick the sanitation fixup as well as
use the new btf_is_datasec() helper and the whitespace cleanup. Looks like
the following:
[...]
if (!has_datasec && btf_is_var(t)) {
/* replace VAR with INT */
t->info = BTF_INFO_ENC(BTF_KIND_INT, 0, 0);
/*
* using size = 1 is the safest choice, 4 will be too
* big and cause kernel BTF validation failure if
* original variable took less than 4 bytes
*/
t->size = 1;
*(int *)(t + 1) = BTF_INT_ENC(0, 0, 8);
} else if (!has_datasec && btf_is_datasec(t)) {
/* replace DATASEC with STRUCT */
[...]
The main changes are:
1) Addition of core parts of compile once - run everywhere (co-re) effort,
that is, relocation of fields offsets in libbpf as well as exposure of
kernel's own BTF via sysfs and loading through libbpf, from Andrii.
More info on co-re: http://vger.kernel.org/bpfconf2019.html#session-2
and http://vger.kernel.org/lpc-bpf2018.html#session-2
2) Enable passing input flags to the BPF flow dissector to customize parsing
and allowing it to stop early similar to the C based one, from Stanislav.
3) Add a BPF helper function that allows generating SYN cookies from XDP and
tc BPF, from Petar.
4) Add devmap hash-based map type for more flexibility in device lookup for
redirects, from Toke.
5) Improvements to XDP forwarding sample code now utilizing recently enabled
devmap lookups, from Jesper.
6) Add support for reporting the effective cgroup progs in bpftool, from Jakub
and Takshak.
7) Fix reading kernel config from bpftool via /proc/config.gz, from Peter.
8) Fix AF_XDP umem pages mapping for 32 bit architectures, from Ivan.
9) Follow-up to add two more BPF loop tests for the selftest suite, from Alexei.
10) Add perf event output helper also for other skb-based program types, from Allan.
11) Fix a co-re related compilation error in selftests, from Yonghong.
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Add support for loading kernel BTF from sysfs (/sys/kernel/btf/vmlinux)
as a target BTF. Also extend the list of on disk search paths for
vmlinux ELF image with entries that perf is searching for.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf 2019-08-11
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) x64 JIT code generation fix for backward-jumps to 1st insn, from Alexei.
2) Fix buggy multi-closing of BTF file descriptor in libbpf, from Andrii.
3) Fix libbpf_num_possible_cpus() to make it thread safe, from Takshak.
4) Fix bpftool to dump an error if pinning fails, from Jakub.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements the core logic for BPF CO-RE offsets relocations.
Every instruction that needs to be relocated has corresponding
bpf_offset_reloc as part of BTF.ext. Relocations are performed by trying
to match recorded "local" relocation spec against potentially many
compatible "target" types, creating corresponding spec. Details of the
algorithm are noted in corresponding comments in the code.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for BPF CO-RE offset relocations. Add section/record
iteration macros for .BTF.ext. These macro are useful for iterating over
each .BTF.ext record, either for dumping out contents or later for BPF
CO-RE relocation handling.
To enable other parts of libbpf to work with .BTF.ext contents, moved
a bunch of type definitions into libbpf_internal.h.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add lots of frequently used helpers that simplify working with BTF
types.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull networking fixes from David Miller:
"Yeah I should have sent a pull request last week, so there is a lot
more here than usual:
1) Fix memory leak in ebtables compat code, from Wenwen Wang.
2) Several kTLS bug fixes from Jakub Kicinski (circular close on
disconnect etc.)
3) Force slave speed check on link state recovery in bonding 802.3ad
mode, from Thomas Falcon.
4) Clear RX descriptor bits before assigning buffers to them in
stmmac, from Jose Abreu.
5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF
loops, from Nishka Dasgupta.
6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean.
7) Need to hold sock across skb->destructor invocation, from Cong
Wang.
8) IP header length needs to be validated in ipip tunnel xmit, from
Haishuang Yan.
9) Use after free in ip6 tunnel driver, also from Haishuang Yan.
10) Do not use MSI interrupts on r8169 chips before RTL8168d, from
Heiner Kallweit.
11) Upon bridge device init failure, we need to delete the local fdb.
From Nikolay Aleksandrov.
12) Handle erros from of_get_mac_address() properly in stmmac, from
Martin Blumenstingl.
13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef
Kadlecsik.
14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with
some devices, so revert. From Johannes Berg.
15) Fix deadlock in rxrpc, from David Howells.
16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue
Haibing.
17) Fix mvpp2 crash on module removal, from Matteo Croce.
18) Fix race in genphy_update_link, from Heiner Kallweit.
19) bpf_xdp_adjust_head() stopped working with generic XDP when we
fixes generic XDP to support stacked devices properly, fix from
Jesper Dangaard Brouer.
20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from
David Ahern.
21) Several memory leaks in new sja1105 driver, from Vladimir Oltean"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits)
net: dsa: sja1105: Fix memory leak on meta state machine error path
net: dsa: sja1105: Fix memory leak on meta state machine normal path
net: dsa: sja1105: Really fix panic on unregistering PTP clock
net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well
net: dsa: sja1105: Fix broken learning with vlan_filtering disabled
net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()
net: sched: sample: allow accessing psample_group with rtnl
net: sched: police: allow accessing police->params with rtnl
net: hisilicon: Fix dma_map_single failed on arm64
net: hisilicon: fix hip04-xmit never return TX_BUSY
net: hisilicon: make hip04_tx_reclaim non-reentrant
tc-testing: updated vlan action tests with batch create/delete
net sched: update vlan action for batched events operations
net: stmmac: tc: Do not return a fragment entry
net: stmmac: Fix issues when number of Queues >= 4
net: stmmac: xgmac: Fix XGMAC selftests
be2net: disable bh with spin_lock in be_process_mcc
net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'
net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
...
5d01ab7bac ("libbpf: fix erroneous multi-closing of BTF FD")
introduced backwards-compatibility issue, manifesting itself as -E2BIG
error returned on program load due to unknown non-zero btf_fd attribute
value for BPF_PROG_LOAD sys_bpf() sub-command.
This patch fixes bug by ensuring that we only ever associate BTF FD with
program if there is a BTF.ext data that was successfully loaded into
kernel, which automatically means kernel supports func_info/line_info
and associated BTF FD for progs (checked and ensured also by BTF
sanitization code).
Fixes: 5d01ab7bac ("libbpf: fix erroneous multi-closing of BTF FD")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Having static variable `cpus` in libbpf_num_possible_cpus function
without guarding it with mutex makes this function thread-unsafe.
If multiple threads accessing this function, in the current form; it
leads to incrementing the static variable value `cpus` in the multiple
of total available CPUs.
Used local stack variable to calculate the number of possible CPUs and
then updated the static variable using WRITE_ONCE().
Changes since v1:
* added stack variable to calculate cpus
* serialized static variable update using WRITE_ONCE()
* fixed Fixes tag
Fixes: 6446b31555 ("bpf: add a new API libbpf_num_possible_cpus()")
Signed-off-by: Takshak Chahande <ctakshak@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds the definition for BPF_MAP_TYPE_DEVMAP_HASH to libbpf_probes.c in
tools/lib/bpf.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
hashmap.h depends on __WORDSIZE being defined. It is defined by
glibc/musl in different headers. It's an explicit goal for musl to be
"non-detectable" at compilation time, so instead include glibc header if
glibc is explicitly detected and fall back to musl header otherwise.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Fixes: e3b9242240 ("libbpf: add resizable non-thread safe internal hashmap")
Link: https://lkml.kernel.org/r/20190718173021.2418606-1-andriin@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By returning previously set print callback from libbpf_set_print, it's
possible to restore it, eventually. This is useful when running many
independent test with one default print function, but overriding log
verbosity for particular subset of tests.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Libbpf stores associated BTF FD per each instance of bpf_program. When
program is unloaded, that FD is closed. This is wrong, because leads to
a race and possibly closing of unrelated files, if application
simultaneously opens new files while bpf_programs are unloaded.
It's also unnecessary, because struct btf "owns" that FD, and
btf__free(), called from bpf_object__close() will close it. Thus the fix
is to never have per-program BTF FD and fetch it from obj->btf, when
necessary.
Fixes: 2993e0515b ("tools/bpf: add support to read .BTF.ext sections")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2019-07-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) fix segfault in libbpf, from Andrii.
2) fix gso_segs access, from Eric.
3) tls/sockmap fixes, from Jakub and John.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Despite a proper NULL-termination after strncpy(..., ..., IFNAMSIZ - 1),
GCC8 still complains about *expected* string truncation:
xsk.c:330:2: error: 'strncpy' output may be truncated copying 15 bytes
from a string of length 15 [-Werror=stringop-truncation]
strncpy(ifr.ifr_name, xsk->ifname, IFNAMSIZ - 1);
This patch gets rid of the issue altogether by using memcpy instead.
There is no performance regression, as strncpy will still copy and fill
all of the bytes anyway.
v1->v2:
- rebase against bpf tree.
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When BPF program defines uninitialized global variable, it's put into
a special COMMON section. Libbpf will reject such programs, but will
provide very unhelpful message with garbage-looking section index.
This patch detects special section cases and gives more explicit error
message.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
'channels.max_combined' initialized only on ioctl success and
errno is only valid on ioctl failure.
The code doesn't produce any runtime issues, but makes memory
sanitizers angry:
Conditional jump or move depends on uninitialised value(s)
at 0x55C056F: xsk_get_max_queues (xsk.c:336)
by 0x55C05B2: xsk_create_bpf_maps (xsk.c:354)
by 0x55C089F: xsk_setup_xdp_prog (xsk.c:447)
by 0x55C0E57: xsk_socket__create (xsk.c:601)
Uninitialised value was created by a stack allocation
at 0x55C04CD: xsk_get_max_queues (xsk.c:318)
Additionally fixed warning on uninitialized bytes in ioctl arguments:
Syscall param ioctl(SIOCETHTOOL) points to uninitialised byte(s)
at 0x648D45B: ioctl (in /usr/lib64/libc-2.28.so)
by 0x55C0546: xsk_get_max_queues (xsk.c:330)
by 0x55C05B2: xsk_create_bpf_maps (xsk.c:354)
by 0x55C089F: xsk_setup_xdp_prog (xsk.c:447)
by 0x55C0E57: xsk_socket__create (xsk.c:601)
Address 0x1ffefff378 is on thread 1's stack
in frame #1, created by xsk_get_max_queues (xsk.c:318)
Uninitialised value was created by a stack allocation
at 0x55C04CD: xsk_get_max_queues (xsk.c:318)
CC: Magnus Karlsson <magnus.karlsson@intel.com>
Fixes: 1cad078842 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As it fails to build in some systems with:
libbpf.c: In function 'perf_buffer__new':
libbpf.c:4515: error: unknown field 'sample_period' specified in initializer
libbpf.c:4516: error: unknown field 'wakeup_events' specified in initializer
Doing as:
attr.sample_period = 1;
I.e. not as a designated initializer makes it build everywhere.
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: fb84b82246 ("libbpf: add perf buffer API")
Link: https://lkml.kernel.org/n/tip-hnlmch8qit1ieksfppmr32si@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Using endian.h and its endianness macros makes this code build in a
wider range of compilers, as some don't have those macros
(__BYTE_ORDER__, __ORDER_LITTLE_ENDIAN__, __ORDER_BIG_ENDIAN__),
so use instead endian.h's macros (__BYTE_ORDER, __LITTLE_ENDIAN,
__BIG_ENDIAN) which makes this code even shorter :-)
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 12ef5634a8 ("libbpf: simplify endianness check")
Fixes: e6c64855fd ("libbpf: add btf__parse_elf API to load .BTF and .BTF.ext")
Link: https://lkml.kernel.org/n/tip-eep5n8vgwcdphw3uc058k03u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If VAR in non-sanitized BTF was size less than 4, converting such VAR
into an INT with size=4 will cause BTF validation failure due to
violationg of STRUCT (into which DATASEC was converted) member size.
Fix by conservatively using size=1.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In case when BTF loading fails despite sanitization, but BPF object has
.BTF.ext loaded as well, we free and null obj->btf, but not
obj->btf_ext. This leads to an attempt to relocate .BTF.ext later on
during bpf_object__load(), which assumes obj->btf is present. This leads
to SIGSEGV on null pointer access. Fix bug by freeing and nulling
obj->btf_ext as well.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull networking fixes from David Miller:
1) Fix AF_XDP cq entry leak, from Ilya Maximets.
2) Fix handling of PHY power-down on RTL8411B, from Heiner Kallweit.
3) Add some new PCI IDs to iwlwifi, from Ihab Zhaika.
4) Fix handling of neigh timers wrt. entries added by userspace, from
Lorenzo Bianconi.
5) Various cases of missing of_node_put(), from Nishka Dasgupta.
6) The new NET_ACT_CT needs to depend upon NF_NAT, from Yue Haibing.
7) Various RDS layer fixes, from Gerd Rausch.
8) Fix some more fallout from TCQ_F_CAN_BYPASS generalization, from
Cong Wang.
9) Fix FIB source validation checks over loopback, also from Cong Wang.
10) Use promisc for unsupported number of filters, from Justin Chen.
11) Missing sibling route unlink on failure in ipv6, from Ido Schimmel.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits)
tcp: fix tcp_set_congestion_control() use from bpf hook
ag71xx: fix return value check in ag71xx_probe()
ag71xx: fix error return code in ag71xx_probe()
usb: qmi_wwan: add D-Link DWM-222 A2 device ID
bnxt_en: Fix VNIC accounting when enabling aRFS on 57500 chips.
net: dsa: sja1105: Fix missing unlock on error in sk_buff()
gve: replace kfree with kvfree
selftests/bpf: fix test_xdp_noinline on s390
selftests/bpf: fix "valid read map access into a read-only array 1" on s390
net/mlx5: Replace kfree with kvfree
MAINTAINERS: update netsec driver
ipv6: Unlink sibling route in case of failure
liquidio: Replace vmalloc + memset with vzalloc
udp: Fix typo in net/ipv4/udp.c
net: bcmgenet: use promisc for unsupported filters
ipv6: rt6_check should return NULL if 'from' is NULL
tipc: initialize 'validated' field of received packets
selftests: add a test case for rp_filter
fib: relax source validation check for loopback packets
mlxsw: spectrum: Do not process learned records with a dummy FID
...
Similar issue was fixed in cdfc7f888c ("libbpf: fix GCC8 warning for
strncpy") already. This one was missed. Fixing now.
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Intel PT:
Adrian Hunter:
- Fix DROP VIEW power_events_view in the postgresql and sqlite export-db
python scripts.
perf script:
Song Liu:
- Assume native_arch for pipe mode, fixing a segfault.
perf inject:
Arnaldo Carvalho de Melo:
- The tool->read() call may pass a NULL evsel, handle it.
core:
Arnaldo Carvalho de Melo:
- Move zalloc/zfree.c to tools/lib, further eroding tools/perf/util.[ch]
- Use zfree() where applicable instead of open coded equivalent.
- Add stdlib.h and some other headers to places where its needed and were
getting via util.h, that doesn't need that anymore.
- Use list_del_init() more thoroughly.
Miscellaneous:
Leo Yan:
- Fix use after free and potential NULL pointer derefs detected by the
smatch tool in various places.
Luke Mujica:
- Remove a couple unused variables in the parse-events code.
Numfor Mbiziwo-Tiapo:
- Initialize variable to suppress memory sanitizer warning in the
mmap-thread-lookup 'perf test' entry.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXSTb7wAKCRCyPKLppCJ+
J7zZAQCxJ5N2U/+kSGKU9OPKnvB2XxeBV1l0Zy5OEPkSfNqwxgEA4sFBjr6mwarU
2M6vwp/90ENkhBQkfTnhunVYkLHaMww=
=H6yU
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.3-20190709' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes:
Intel PT:
Adrian Hunter:
- Fix DROP VIEW power_events_view in the postgresql and sqlite export-db
python scripts.
perf script:
Song Liu:
- Assume native_arch for pipe mode, fixing a segfault.
perf inject:
Arnaldo Carvalho de Melo:
- The tool->read() call may pass a NULL evsel, handle it.
core:
Arnaldo Carvalho de Melo:
- Move zalloc/zfree.c to tools/lib, further eroding tools/perf/util.[ch]
- Use zfree() where applicable instead of open coded equivalent.
- Add stdlib.h and some other headers to places where its needed and were
getting via util.h, that doesn't need that anymore.
- Use list_del_init() more thoroughly.
Miscellaneous:
Leo Yan:
- Fix use after free and potential NULL pointer derefs detected by the
smatch tool in various places.
Luke Mujica:
- Remove a couple unused variables in the parse-events code.
Numfor Mbiziwo-Tiapo:
- Initialize variable to suppress memory sanitizer warning in the
mmap-thread-lookup 'perf test' entry.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On 32-bit platforms compiler complains about conversion:
libbpf.c: In function ‘perf_event_open_probe’:
libbpf.c:4112:17: error: cast from pointer to integer of different
size [-Werror=pointer-to-int-cast]
attr.config1 = (uint64_t)(void *)name; /* kprobe_func or uprobe_path */
^
Reported-by: Matt Hart <matthew.hart@linaro.org>
Fixes: b265002747 ("libbpf: add kprobe/uprobe attach API")
Tested-by: Matt Hart <matthew.hart@linaro.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull networking updates from David Miller:
"Some highlights from this development cycle:
1) Big refactoring of ipv6 route and neigh handling to support
nexthop objects configurable as units from userspace. From David
Ahern.
2) Convert explored_states in BPF verifier into a hash table,
significantly decreased state held for programs with bpf2bpf
calls, from Alexei Starovoitov.
3) Implement bpf_send_signal() helper, from Yonghong Song.
4) Various classifier enhancements to mvpp2 driver, from Maxime
Chevallier.
5) Add aRFS support to hns3 driver, from Jian Shen.
6) Fix use after free in inet frags by allocating fqdirs dynamically
and reworking how rhashtable dismantle occurs, from Eric Dumazet.
7) Add act_ctinfo packet classifier action, from Kevin
Darbyshire-Bryant.
8) Add TFO key backup infrastructure, from Jason Baron.
9) Remove several old and unused ISDN drivers, from Arnd Bergmann.
10) Add devlink notifications for flash update status to mlxsw driver,
from Jiri Pirko.
11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.
12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.
13) Various enhancements to ipv6 flow label handling, from Eric
Dumazet and Willem de Bruijn.
14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
der Merwe, and others.
15) Various improvements to axienet driver including converting it to
phylink, from Robert Hancock.
16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.
17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
Radulescu.
18) Add devlink health reporting to mlx5, from Moshe Shemesh.
19) Convert stmmac over to phylink, from Jose Abreu.
20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
Shalom Toledo.
21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.
22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.
23) Track spill/fill of constants in BPF verifier, from Alexei
Starovoitov.
24) Support bounded loops in BPF, from Alexei Starovoitov.
25) Various page_pool API fixes and improvements, from Jesper Dangaard
Brouer.
26) Just like ipv4, support ref-countless ipv6 route handling. From
Wei Wang.
27) Support VLAN offloading in aquantia driver, from Igor Russkikh.
28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.
29) Add flower GRE encap/decap support to nfp driver, from Pieter
Jansen van Vuuren.
30) Protect against stack overflow when using act_mirred, from John
Hurley.
31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.
32) Use page_pool API in netsec driver, Ilias Apalodimas.
33) Add Google gve network driver, from Catherine Sullivan.
34) More indirect call avoidance, from Paolo Abeni.
35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.
36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.
37) Add MPLS manipulation actions to TC, from John Hurley.
38) Add sending a packet to connection tracking from TC actions, and
then allow flower classifier matching on conntrack state. From
Paul Blakey.
39) Netfilter hw offload support, from Pablo Neira Ayuso"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
net/mlx5e: Return in default case statement in tx_post_resync_params
mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
net: dsa: add support for BRIDGE_MROUTER attribute
pkt_sched: Include const.h
net: netsec: remove static declaration for netsec_set_tx_de()
net: netsec: remove superfluous if statement
netfilter: nf_tables: add hardware offload support
net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
net: flow_offload: add flow_block_cb_is_busy() and use it
net: sched: remove tcf block API
drivers: net: use flow block API
net: sched: use flow block API
net: flow_offload: add flow_block_cb_{priv, incref, decref}()
net: flow_offload: add list handling functions
net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
net: flow_offload: add flow_block_cb_setup_simple()
net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
...
Eroding a bit more the tools/perf/util/util.h hodpodge header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_buffer "object" is part of libbpf API now, add it to the list of
libbpf function prefixes.
Suggested-by: Daniel Borkman <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
For BPF_MAP_TYPE_PERF_EVENT_ARRAY typically correct size is number of
possible CPUs. This is impossible to specify at compilation time. This
change adds automatic setting of PERF_EVENT_ARRAY size to number of
system CPUs, unless non-zero size is specified explicitly. This allows
to adjust size for advanced specific cases, while providing convenient
and logical defaults.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
BPF_MAP_TYPE_PERF_EVENT_ARRAY map is often used to send data from BPF program
to user space for additional processing. libbpf already has very low-level API
to read single CPU perf buffer, bpf_perf_event_read_simple(), but it's hard to
use and requires a lot of code to set everything up. This patch adds
perf_buffer abstraction on top of it, abstracting setting up and polling
per-CPU logic into simple and convenient API, similar to what BCC provides.
perf_buffer__new() sets up per-CPU ring buffers and updates corresponding BPF
map entries. It accepts two user-provided callbacks: one for handling raw
samples and one for get notifications of lost samples due to buffer overflow.
perf_buffer__new_raw() is similar, but provides more control over how
perf events are set up (by accepting user-provided perf_event_attr), how
they are handled (perf_event_header pointer is passed directly to
user-provided callback), and on which CPUs ring buffers are created
(it's possible to provide a list of CPUs and corresponding map keys to
update). This API allows advanced users fuller control.
perf_buffer__poll() is used to fetch ring buffer data across all CPUs,
utilizing epoll instance.
perf_buffer__free() does corresponding clean up and unsets FDs from BPF map.
All APIs are not thread-safe. User should ensure proper locking/coordination if
used in multi-threaded set up.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Change BTF-defined map definitions to capture compile-time integer
values as part of BTF type definition, to avoid split of key/value type
information and actual type/size/flags initialization for maps.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a wrapper utilizing bpf_link "infrastructure" to allow attaching BPF
programs to raw tracepoints.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Allow attaching BPF programs to kernel tracepoint BPF hooks specified by
category and name.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add ability to attach to kernel and user probes and retprobes.
Implementation depends on perf event support for kprobes/uprobes.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_program__attach_perf_event allows to attach BPF program to existing
perf event hook, providing most generic and most low-level way to attach BPF
programs. It returns struct bpf_link, which should be passed to
bpf_link__destroy to detach and free resources, associated with a link.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_link is an abstraction of an association of a BPF program and one of
many possible BPF attachment points (hooks). This allows to have uniform
interface for detaching BPF programs regardless of the nature of link
and how it was created. Details of creation and setting up of a specific
bpf_link is handled by corresponding attachment methods
(bpf_program__attach_xxx) added in subsequent commits. Once successfully
created, bpf_link has to be eventually destroyed with
bpf_link__destroy(), at which point BPF program is disassociated from
a hook and all the relevant resources are freed.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
It's often inconvenient to switch sign of error when passing it into
libbpf_strerror_r. It's better for it to handle that automatically.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Based on the following report from Smatch, fix the potential NULL
pointer dereference check:
tools/lib/bpf/libbpf.c:3493
bpf_prog_load_xattr() warn: variable dereferenced before check 'attr'
(see line 3483)
3479 int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr,
3480 struct bpf_object **pobj, int *prog_fd)
3481 {
3482 struct bpf_object_open_attr open_attr = {
3483 .file = attr->file,
3484 .prog_type = attr->prog_type,
^^^^^^
3485 };
At the head of function, it directly access 'attr' without checking
if it's NULL pointer. This patch moves the values assignment after
validating 'attr' and 'attr->file'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
GCC8 started emitting warning about using strncpy with number of bytes
exactly equal destination size, which is generally unsafe, as can lead
to non-zero terminated string being copied. Use IFNAMSIZ - 1 as number
of bytes to ensure name is always zero-terminated.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This came from the kernel lib/argv_split.c, so move it to
tools/lib/argv_split.c, to get it closer to the kernel structure.
We need to audit the usage of argv_split() to figure out if it is really
necessary to do have one allocation per argv[] entry, looking at one of
its users I guess that is not the case and we probably are even leaking
those allocations by not using argv_free() judiciously, for later.
With this we further remove stuff from tools/perf/util/, reducing the
perf specific codebase and encouraging other tools/ code to use these
routines so as to keep the style and constructs used with the kernel.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-j479s1ive9h75w5lfg16jroz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it to further reduce the size of tools/perf/util/string.c,
replacing the strxfrchar() equivalent function we have there.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-x3r61ikjrso1buygxwke8id3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make libbpf aware of new sockopt hooks so it can derive prog type
and hook point from the section names.
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The typical XDP memory scheme is one packet per page. Change the AF_XDP
frame size in libbpf to 4096, which is the page size on x86, to allow
libbpf to be used with the drivers with the packet-per-page scheme.
Add a command line option -f to xdpsock to allow to specify a custom
frame size.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Query XDP_OPTIONS in libbpf to determine if the zero-copy mode is active
or not.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Since we're working on moving stuff out of tools/perf/util/ to
tools/lib/, take the opportunity to adopt routines from the kernel that
are equivalent, so that tools/ code look more like the kernel.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-zqy1zdu2ok17qvi0ytk8z13c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It fixes build error for 32bit caused by type mismatch
size_t/unsigned long.
Fixes: bf82927125 ("libbpf: refactor map initialization")
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Same implementation, will be used to replace ad-hoc equivalent code in
tools/.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dig691cg9ripvoiprpidthw7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got the sane_ctype.h headers from git and kept using it so far, but
since that code originally came from the kernel sources to the git
sources, perhaps its better to just use the one in the kernel, so that
we can leverage tools/perf/check_headers.sh to be notified when our copy
gets out of sync, i.e. when fixes or goodies are added to the code we've
copied.
This will help with things like tools/lib/string.c where we want to have
more things in common with the kernel, such as strim(), skip_spaces(),
etc so as to go on removing the things that we have in tools/perf/util/
and instead using the code in the kernel, indirectly and removing things
like EXPORT_SYMBOL(), etc, getting notified when fixes and improvements
are made to the original code.
Hopefully this also should help with reducing the difference of code
hosted in tools/ to the one in the kernel proper.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7k9868l713wqtgo01xxygn12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was just including a ../util.h that wasn't even there:
$ cat tools/perf/util/include/linux/../util.h
cat: tools/perf/util/include/linux/../util.h: No such file or directory
$
This would make kallsyms.h get util.h somehow and then files including
it would get util.h defined stuff, a mess, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wlzwken4psiat4zvfbvaoqiw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just removing more stuff from tools/perf/, this is mostly used in the
kallsyms parsing and in places in perf where kallsyms is involved, so we
get it for free there.
With this we reduce a bit more util.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5mc1zg0jqdwgkn8c358kaba6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are several spelling mistakes in pr_warning messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update for
5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that
were "easy" to determine by pattern matching. The ones after this are
going to be a bit more difficult and the people on the spdx list will be
discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud, always
nice to see in a diffstat.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXQyQYA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymnGQCghETUBotn1p3hTjY56VEs6dGzpHMAnRT0m+lv
kbsjBGEJpLbMRB2krnaU
=RMcT
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-06-19
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) new SO_REUSEPORT_DETACH_BPF setsocktopt, from Martin.
2) BTF based map definition, from Andrii.
3) support bpf_map_lookup_elem for xskmap, from Jonathan.
4) bounded loops and scalar precision logic in the verifier, from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Based on 2 normalized pattern(s):
this source code is licensed under the gnu general public license
version 2 see the file copying for more details
this source code is licensed under general public license version 2
see
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 52 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.449021192@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add const qualifiers to bpf_object/bpf_program/bpf_map arguments for
getter APIs. There is no need for them to not be const pointers.
Verified that
make -C tools/lib/bpf
make -C tools/testing/selftests/bpf
make -C tools/perf
all build without warnings.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull networking fixes from David Miller:
"Lots of bug fixes here:
1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.
2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
Crispin.
3) Use after free in psock backlog workqueue, from John Fastabend.
4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
Salem.
5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.
6) Network header needs to be set for packet redirect in nfp, from
John Hurley.
7) Fix udp zerocopy refcnt, from Willem de Bruijn.
8) Don't assume linear buffers in vxlan and geneve error handlers,
from Stefano Brivio.
9) Fix TOS matching in mlxsw, from Jiri Pirko.
10) More SCTP cookie memory leak fixes, from Neil Horman.
11) Fix VLAN filtering in rtl8366, from Linus Walluij.
12) Various TCP SACK payload size and fragmentation memory limit fixes
from Eric Dumazet.
13) Use after free in pneigh_get_next(), also from Eric Dumazet.
14) LAPB control block leak fix from Jeremy Sowden"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
lapb: fixed leak of control-blocks.
tipc: purge deferredq list for each grp member in tipc_group_delete
ax25: fix inconsistent lock state in ax25_destroy_timer
neigh: fix use-after-free read in pneigh_get_next
tcp: fix compile error if !CONFIG_SYSCTL
hv_sock: Suppress bogus "may be used uninitialized" warnings
be2net: Fix number of Rx queues used for flow hashing
net: handle 802.1P vlan 0 packets properly
tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
tcp: add tcp_min_snd_mss sysctl
tcp: tcp_fragment() should apply sane memory limits
tcp: limit payload size of sacked skbs
Revert "net: phylink: set the autoneg state in phylink_phy_change"
bpf: fix nested bpf tracepoints with per-cpu data
bpf: Fix out of bounds memory access in bpf_sk_storage
vsock/virtio: set SOCK_DONE on peer shutdown
net: dsa: rtl8366: Fix up VLAN filtering
net: phylink: set the autoneg state in phylink_phy_change
net: add high_order_alloc_disable sysctl/static key
tcp: add tcp_tx_skb_cache sysctl
...
This patch adds support for a new way to define BPF maps. It relies on
BTF to describe mandatory and optional attributes of a map, as well as
captures type information of key and value naturally. This eliminates
the need for BPF_ANNOTATE_KV_PAIR hack and ensures key/value sizes are
always in sync with the key/value type.
Relying on BTF, this approach allows for both forward and backward
compatibility w.r.t. extending supported map definition features. By
default, any unrecognized attributes are treated as an error, but it's
possible relax this using MAPS_RELAX_COMPAT flag. New attributes, added
in the future will need to be optional.
The outline of the new map definition (short, BTF-defined maps) is as follows:
1. All the maps should be defined in .maps ELF section. It's possible to
have both "legacy" map definitions in `maps` sections and BTF-defined
maps in .maps sections. Everything will still work transparently.
2. The map declaration and initialization is done through
a global/static variable of a struct type with few mandatory and
extra optional fields:
- type field is mandatory and specified type of BPF map;
- key/value fields are mandatory and capture key/value type/size information;
- max_entries attribute is optional; if max_entries is not specified or
initialized, it has to be provided in runtime through libbpf API
before loading bpf_object;
- map_flags is optional and if not defined, will be assumed to be 0.
3. Key/value fields should be **a pointer** to a type describing
key/value. The pointee type is assumed (and will be recorded as such
and used for size determination) to be a type describing key/value of
the map. This is done to save excessive amounts of space allocated in
corresponding ELF sections for key/value of big size.
4. As some maps disallow having BTF type ID associated with key/value,
it's possible to specify key/value size explicitly without
associating BTF type ID with it. Use key_size and value_size fields
to do that (see example below).
Here's an example of simple ARRAY map defintion:
struct my_value { int x, y, z; };
struct {
int type;
int max_entries;
int *key;
struct my_value *value;
} btf_map SEC(".maps") = {
.type = BPF_MAP_TYPE_ARRAY,
.max_entries = 16,
};
This will define BPF ARRAY map 'btf_map' with 16 elements. The key will
be of type int and thus key size will be 4 bytes. The value is struct
my_value of size 12 bytes. This map can be used from C code exactly the
same as with existing maps defined through struct bpf_map_def.
Here's an example of STACKMAP definition (which currently disallows BTF type
IDs for key/value):
struct {
__u32 type;
__u32 max_entries;
__u32 map_flags;
__u32 key_size;
__u32 value_size;
} stackmap SEC(".maps") = {
.type = BPF_MAP_TYPE_STACK_TRACE,
.max_entries = 128,
.map_flags = BPF_F_STACK_BUILD_ID,
.key_size = sizeof(__u32),
.value_size = PERF_MAX_STACK_DEPTH * sizeof(struct bpf_stack_build_id),
};
This approach is naturally extended to support map-in-map, by making a value
field to be another struct that describes inner map. This feature is not
implemented yet. It's also possible to incrementally add features like pinning
with full backwards and forward compatibility. Support for static
initialization of BPF_MAP_TYPE_PROG_ARRAY using pointers to BPF programs
is also on the roadmap.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Libbpf does sanitization of BTF before loading it into kernel, if kernel
doesn't support some of newer BTF features. This removes some of the
important information from BTF (e.g., DATASEC and VAR description),
which will be used for map construction. This patch splits BTF
processing into initialization step, in which BTF is initialized from
ELF and all the original data is still preserved; and
sanitization/loading step, which ensures that BTF is safe to load into
kernel. This allows to use full BTF information to construct maps, while
still loading valid BTF into older kernels.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
To support maps to be defined in multiple sections, it's important to
identify map not just by offset within its section, but section index as
well. This patch adds tracking of section index.
For global data, we record section index of corresponding
.data/.bss/.rodata ELF section for uniformity, and thus don't need
a special value of offset for those maps.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
User and global data maps initialization has gotten pretty complicated
and unnecessarily convoluted. This patch splits out the logic for global
data map and user-defined map initialization. It also removes the
restriction of pre-calculating how many maps will be initialized,
instead allowing to keep adding new maps as they are discovered, which
will be used later for BTF-defined map definitions.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Simplify ELF parsing logic by exiting early, as there is no common clean
up path to execute. That makes it unnecessary to track when err was set
and when it was cleared. It also reduces nesting in some places.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
As a preparation for adding BTF-based BPF map loading, extract .BTF and
.BTF.ext loading logic.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Multiple files in libbpf redefine their own definitions for min/max.
Let's define them in libbpf_internal.h and use those everywhere.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Kernel internally checks that either key or value type ID is specified,
before using btf_fd. Do the same in libbpf's map creation code for
determining when to retry map creation w/o BTF.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: fba01a0689 ("libbpf: use negative fd to specify missing BTF")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Adding a new API libbpf_num_possible_cpus() that helps user with
per-CPU map operations.
Signed-off-by: Hechao Li <hechaol@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use the recent change to XSKMAP bpf_map_lookup_elem() to test if
there is a xsk present in the map instead of duplicating the work
with qidconf.
Fix things so callers using XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD
bypass any internal bpf maps, so xsk_socket__{create|delete} works
properly.
Clean up error handling path.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2019-06-07
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix several bugs in riscv64 JIT code emission which forgot to clear high
32-bits for alu32 ops, from Björn and Luke with selftests covering all
relevant BPF alu ops from Björn and Jiong.
2) Two fixes for UDP BPF reuseport that avoid calling the program in case of
__udp6_lib_err and UDP GRO which broke reuseport_select_sock() assumption
that skb->data is pointing to transport header, from Martin.
3) Two fixes for BPF sockmap: a use-after-free from sleep in psock's backlog
workqueue, and a missing restore of sk_write_space when psock gets dropped,
from Jakub and John.
4) Fix unconnected UDP sendmsg hook API which is insufficient as-is since it
breaks standard applications like DNS if reverse NAT is not performed upon
receive, from Daniel.
5) Fix an out-of-bounds read in __bpf_skc_lookup which in case of AF_INET6
fails to verify that the length of the tuple is long enough, from Lorenz.
6) Fix libbpf's libbpf__probe_raw_btf to return an fd instead of 0/1 (for
{un,}successful probe) as that is expected to be propagated as an fd to
load_sk_storage_btf() and thus closing the wrong descriptor otherwise,
from Michal.
7) Fix bpftool's JSON output for the case when a lookup fails, from Krzesimir.
8) Minor misc fixes in docs, samples and selftests, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some ISDN files that got removed in net-next had some changes
done in mainline, take the removals.
Signed-off-by: David S. Miller <davem@davemloft.net>
Another trivial patch to libbpf in order to enable identifying and
attaching programs to BPF_CGROUP_UDP{4,6}_RECVMSG by section name.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Based on 1 normalized pattern(s):
released under the gpl v2 and only v2 not any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 12 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141332.526460839@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before this change, function load_sk_storage_btf expected that
libbpf__probe_raw_btf was returning a BTF descriptor, but in fact it was
returning an information about whether the probe was successful (0 or
1). load_sk_storage_btf was using that value as an argument of the close
function, which was resulting in closing stdout and thus terminating the
process which called that function.
That bug was visible in bpftool. `bpftool feature` subcommand was always
exiting too early (because of closed stdout) and it didn't display all
requested probes. `bpftool -j feature` or `bpftool -p feature` were not
returning a valid json object.
This change renames the libbpf__probe_raw_btf function to
libbpf__load_raw_btf, which now returns a BTF descriptor, as expected in
load_sk_storage_btf.
v2:
- Fix typo in the commit message.
v3:
- Simplify BTF descriptor handling in bpf_object__probe_btf_* functions.
- Rename libbpf__probe_raw_btf function to libbpf__load_raw_btf and
return a BTF descriptor.
v4:
- Fix typo in the commit message.
Fixes: d7c4b3980c ("libbpf: detect supported kernel BTF features and sanitize BTF")
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a bunch of lines of code or comments that are unnecessary
wrapped into multi-lines. Fix that without violating any code
guidelines.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
A bunch of typo and formatting fixes.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Extra check for type is unnecessary in first case.
Extra zeroing is unnecessary, as snprintf guarantees that it will
zero-terminate string.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
0 is a valid FD, so it's better to initialize it to -1, as is done in
other places. Also, technically, BTF type ID 0 is valid (it's a VOID
type), so it's more reliable to check btf_fd, instead of
btf_key_type_id, to determine if there is any BTF associated with a map.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
All of libbpf errors are negative, except this one. Fix it.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Validate there was no error retrieving symbol name corresponding to
a BPF map.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Rewrite endianness check to use "more canonical" way, using
compiler-defined macros, similar to few other places in libbpf. It also
is more obvious and shorter.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
pr_warning ultimately may call into user-provided callback function,
which can clobber errno value, so we need to save it before that.
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Ensure that size of a section w/ BPF instruction is exactly a multiple
of BPF instruction size.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There are two functions in libbpf that support passing a log_level
parameter for the verifier for loading programs:
bpf_object__load_xattr() and bpf_prog_load_xattr(). Both accept an
attribute object containing the log_level, and apply it to the programs
to load.
It turns out that to effectively load the programs, the latter function
eventually relies on the former. This was not taken into account when
adding support for log_level in bpf_object__load_xattr(), and the
log_level passed to bpf_prog_load_xattr() later gets overwritten with a
zero value, thus disabling verifier logs for the program in all cases:
bpf_prog_load_xattr() // prog->log_level = attr1->log_level;
-> bpf_object__load() // attr2->log_level = 0;
-> bpf_object__load_xattr() // <pass prog and attr2>
-> bpf_object__load_progs() // prog->log_level = attr2->log_level;
Fix this by OR-ing the log_level in bpf_object__load_progs(), instead of
overwriting it.
v2: Fix commit log description (confusion on function names in v1).
Fixes: 60276f9849 ("libbpf: add bpf_object__load_xattr() API function to pass log_level")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf was recently made aware of the log_level attribute for programs,
used to specify the level of information expected to be dumped by the
verifier. Function bpf_prog_load_xattr() got support for this log_level
parameter.
But some applications using libbpf rely on another function to load
programs, bpf_object__load(), which does accept any parameter for log
level. Create an API function based on bpf_object__load(), but accepting
an "attr" object as a parameter. Then add a log_level field to that
object, so that applications calling the new bpf_object__load_xattr()
can pick the desired log level.
v3:
- Rewrite commit log.
v2:
- We are in a new cycle, bump libbpf extraversion number.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fix below warning reported by coccicheck:
/tools/lib/bpf/libbpf.c:3461:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf doesn't allow passing "prog_flags" during bpf program load in a
couple of load related APIs, "bpf_load_program_xattr", "load_program" and
"bpf_prog_load_xattr".
It makes sense to allow passing "prog_flags" which is useful for
customizing program loading.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BTF contains enough type information to allow generating valid
compilable C header w/ correct layout of structs/unions and all the
typedef/enum definitions. This patch adds a new "object" - btf_dump to
facilitate dumping BTF as valid C. btf_dump__dump_type() is the main API
which takes care of dumping out (through user-provided printf-like
callback function) C definitions for given type ID and it's required
dependencies. This allows for not just dumping out entirety of BTF types,
but also selective filtering based on user-provided criterias w/ minimal
set of dependent types.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is a need for fast point lookups inside libbpf for multiple use
cases (e.g., name resolution for BTF-to-C conversion, by-name lookups in
BTF for upcoming BPF CO-RE relocation support, etc). This patch
implements simple resizable non-thread safe hashmap using single linked
list chains.
Four different insert strategies are supported:
- HASHMAP_ADD - only add key/value if key doesn't exist yet;
- HASHMAP_SET - add key/value pair if key doesn't exist yet; otherwise,
update value;
- HASHMAP_UPDATE - update value, if key already exists; otherwise, do
nothing and return -ENOENT;
- HASHMAP_APPEND - always add key/value pair, even if key already exists.
This turns hashmap into a multimap by allowing multiple values to be
associated with the same key. Most useful read API for such hashmap is
hashmap__for_each_key_entry() iteration. If hashmap__find() is still
used, it will return last inserted key/value entry (first in a bucket
chain).
For HASHMAP_SET and HASHMAP_UPDATE, old key/value pair is returned, so
that calling code can handle proper memory management, if necessary.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Loading BTF and BTF.ext from ELF file is a common need. Instead of
requiring every user to re-implement it, let's provide this API from
libbpf itself. It's mostly copy/paste from `bpftool btf dump`
implementation, which will be switched to libbpf's version in next
patch. btf__parse_elf allows to load BTF and optionally BTF.ext.
This is also useful for tests that need to load/work with BTF, loaded
from test ELF files.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
libbpf_internal.h expects a bunch of stuff defined in libbpf.h to be
defined. This patch makes sure that libbpf.h is always included.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's easy to have a mismatch of "intended to be public" vs really
exposed API functions. While Makefile does check for this mismatch, if
it actually occurs it's not trivial to determine which functions are
accidentally exposed. This patch dumps out a diff showing what's not
supposed to be exposed facilitating easier fixing.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull networking fixes from David Miller:1) Use after free in __dev_map_entry_free(), from Eric Dumazet.
1) Use after free in __dev_map_entry_free(), from Eric Dumazet.
2) Fix TCP retransmission timestamps on passive Fast Open, from Yuchung
Cheng.
3) Orphan NFC, we'll take the patches directly into my tree. From
Johannes Berg.
4) We can't recycle cloned TCP skbs, from Eric Dumazet.
5) Some flow dissector bpf test fixes, from Stanislav Fomichev.
6) Fix RCU marking and warnings in rhashtable, from Herbert Xu.
7) Fix some potential fib6 leaks, from Eric Dumazet.
8) Fix a _decode_session4 uninitialized memory read bug fix that got
lost in a merge. From Florian Westphal.
9) Fix ipv6 source address routing wrt. exception route entries, from
Wei Wang.
10) The netdev_xmit_more() conversion was not done %100 properly in mlx5
driver, fix from Tariq Toukan.
11) Clean up botched merge on netfilter kselftest, from Florian
Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (74 commits)
of_net: fix of_get_mac_address retval if compiled without CONFIG_OF
net: fix kernel-doc warnings for socket.c
net: Treat sock->sk_drops as an unsigned int when printing
kselftests: netfilter: fix leftover net/net-next merge conflict
mlxsw: core: Prevent reading unsupported slave address from SFP EEPROM
mlxsw: core: Prevent QSFP module initialization for old hardware
vsock/virtio: Initialize core virtio vsock before registering the driver
net/mlx5e: Fix possible modify header actions memory leak
net/mlx5e: Fix no rewrite fields with the same match
net/mlx5e: Additional check for flow destination comparison
net/mlx5e: Add missing ethtool driver info for representors
net/mlx5e: Fix number of vports for ingress ACL configuration
net/mlx5e: Fix ethtool rxfh commands when CONFIG_MLX5_EN_RXNFC is disabled
net/mlx5e: Fix wrong xmit_more application
net/mlx5: Fix peer pf disable hca command
net/mlx5: E-Switch, Correct type to u16 for vport_num and int for vport_index
net/mlx5: Add meaningful return codes to status_to_err function
net/mlx5: Imply MLXFW in mlx5_core
Revert "tipc: fix modprobe tipc failed after switch order of device registration"
vsock/virtio: free packets during the socket release
...
perf.data:
Alexey Budankov:
- Streaming compression of perf ring buffer into PERF_RECORD_COMPRESSED
user space records, resulting in ~3-5x perf.data file size reduction
on variety of tested workloads what saves storage space on larger
server systems where perf.data size can easily reach several tens or
even hundreds of GiBs, especially when profiling with DWARF-based
stacks and tracing of context switches.
perf record:
Arnaldo Carvalho de Melo
- Improve -user-regs/intr-regs suggestions to overcome errors.
perf annotate:
Jin Yao:
- Remove hist__account_cycles() from callback, speeding up branch processing
(perf record -b).
perf stat:
- Add a 'percore' event qualifier, e.g.: -e cpu/event=0,umask=0x3,percore=1/,
that sums up the event counts for both hardware threads in a core.
We can already do this with --per-core, but it's often useful to do
this together with other metrics that are collected per hardware thread.
I.e. now its possible to do this per-event, and have it mixed with other
events not aggregated by core.
core libraries:
Donald Yandt:
- Check for errors when doing fgets(/proc/version).
Jiri Olsa:
- Speed up report for perf compiled with linbunwind.
tools headers:
Arnaldo Carvalho de Melo
- Update memcpy_64.S, x86's kvm.h and pt_regs.h.
arm64:
Florian Fainelli:
- Map Brahma-B53 CPUID to cortex-a53 events.
- Add Cortex-A57 and Cortex-A72 events.
csky:
Mao Han:
- Add DWARF register mappings for libdw, allowing --call-graph=dwarf to work
on the C-SKY arch.
x86:
Andi Kleen/Kan Liang:
- Add support for recording and printing XMM registers, available, for
instance, on Icelake.
Kan Liang:
- Add uncore_upi (Intel's "Ultra Path Interconnect" events) JSON support.
UPI replaced the Intel QuickPath Interconnect (QPI) in Xeon Skylake-SP.
Intel PT:
Adrian Hunter
. Fix instructions sampling rate.
. Timestamp fixes.
. Improve exported-sql-viewer GUI, allowing, for instance, to copy'n'paste
the trees, useful for e-mailing.
Documentation:
Thomas Richter:
- Add description for 'perf --debug stderr=1', which redirects stderr to stdout.
libtraceevent:
Tzvetomir Stoyanov:
- Add man pages for the various APIs.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXN8KEwAKCRCyPKLppCJ+
JxbAAPsE4bDD7UyTJgVWVXFyqMkaFURv9eGtmhbH/EhnZ/ADfwEAoUG6C+G2DLre
IMtgTXSlRShQucQbum5Rcp9lcXGL+gY=
=mGtw
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.2-20190517' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf.data:
Alexey Budankov:
- Streaming compression of perf ring buffer into PERF_RECORD_COMPRESSED
user space records, resulting in ~3-5x perf.data file size reduction
on variety of tested workloads what saves storage space on larger
server systems where perf.data size can easily reach several tens or
even hundreds of GiBs, especially when profiling with DWARF-based
stacks and tracing of context switches.
perf record:
Arnaldo Carvalho de Melo
- Improve -user-regs/intr-regs suggestions to overcome errors.
perf annotate:
Jin Yao:
- Remove hist__account_cycles() from callback, speeding up branch processing
(perf record -b).
perf stat:
- Add a 'percore' event qualifier, e.g.: -e cpu/event=0,umask=0x3,percore=1/,
that sums up the event counts for both hardware threads in a core.
We can already do this with --per-core, but it's often useful to do
this together with other metrics that are collected per hardware thread.
I.e. now its possible to do this per-event, and have it mixed with other
events not aggregated by core.
core libraries:
Donald Yandt:
- Check for errors when doing fgets(/proc/version).
Jiri Olsa:
- Speed up report for perf compiled with linbunwind.
tools headers:
Arnaldo Carvalho de Melo
- Update memcpy_64.S, x86's kvm.h and pt_regs.h.
arm64:
Florian Fainelli:
- Map Brahma-B53 CPUID to cortex-a53 events.
- Add Cortex-A57 and Cortex-A72 events.
csky:
Mao Han:
- Add DWARF register mappings for libdw, allowing --call-graph=dwarf to work
on the C-SKY arch.
x86:
Andi Kleen/Kan Liang:
- Add support for recording and printing XMM registers, available, for
instance, on Icelake.
Kan Liang:
- Add uncore_upi (Intel's "Ultra Path Interconnect" events) JSON support.
UPI replaced the Intel QuickPath Interconnect (QPI) in Xeon Skylake-SP.
Intel PT:
Adrian Hunter
. Fix instructions sampling rate.
. Timestamp fixes.
. Improve exported-sql-viewer GUI, allowing, for instance, to copy'n'paste
the trees, useful for e-mailing.
Documentation:
Thomas Richter:
- Add description for 'perf --debug stderr=1', which redirects stderr to stdout.
libtraceevent:
Tzvetomir Stoyanov:
- Add man pages for the various APIs.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
libbpf_util.h header was recently exposed as public as a dependency of
xsk.h. In addition to memory barriers, it contained logging helpers,
which are not supposed to be exposed. This patch moves those into
libbpf_internal.h, which is kept as an internal header.
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 7080da8909 ("libbpf: add libbpf_util.h to header install.")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Otherwise libbpf is unusable from unprivileged process with
kernel.kernel.unprivileged_bpf_disabled=1.
All I get is EPERM from the probes, even if I just want to
open an ELF object and look at what progs/maps it has.
Instead of dying on probes, let's just pr_debug the error and
try to continue.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Andrii Nakryiko