This commit uses the fact that
if (a) {
if (b) {
...
}
}
can instead be written as
if (a && b) {
...
}
without any change in behavior, allowing to decrease the indentation
of the contained code block and thus reducing the average line length.
Signed-off-by: Tobias Nießen <tobias.niessen@stud.uni-hannover.de>
Signed-off-by: Sabrina Gaube <sabrina-gaube@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename 'host_interface' source and header file to include the 'wilc_'
prefix in its name.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup patch to remove the passing of driver handler, get the 'idx'
value inside the called function.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove use of 'src_addr' element in wilc_vif, as the same information
already copied to net_device->dev_addr.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup patch to avoid loop to traverse the interfaces instead make use
of vif received from net_device priv data.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed the 'driver_handler_id' & 'ifc_id' elements and used 'idx' to
identify the handler.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed the use of two hardcoded interfaces and added support to
add/remove the network interfaces dynamically.
Now the driver will have single default interface with name 'wlan0' and
later other interface can be added from user space application e.g
using 'iw add' command.
Also taken care to maintain 'wilc_vif' as part of 'net_device'
private data and 'wilc' struct as 'wiphy' private data.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For the error path in wilc_wlan_initialize(), the resources are not
cleanup in the correct order. Reverted the previous changes and use the
correct order to free during error condition.
Fixes: b46d68825c ("staging: wilc1000: remove COMPLEMENT_BOOT")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moved the handling of p2p related operation in the caller context instead
of using workqueue.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the file loaded by the code anyway, but now you can use
'modinfo' to determine the needed firmware file for this module.
Spotted when packaging firmware files for the fli4l Linux router
distribution, where a script uses the information from 'modinfo' to
collect all needed firmware files to package.
Cc: Christoph Schulz <mail@kristov.de>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missing parenthesis to PCIE_FTS_NUM_LO macro to do the
same it was being done in original code.
Fixes: a4b2eb912b ("staging: mt7621-pci: rewrite RC FTS configuration")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 52c4dfcead ("Staging: vc04_services: Cleanup in
ctrl_set_bitrate()") changed the return behavior of ctrl_set_bitrate().
We cannot do this because of a bug in the firmware, which breaks probing
of bcm2835-camera:
bcm2835-v4l2: mmal_init: failed to set all camera controls: -3
Cleanup: Destroy video encoder
Cleanup: Destroy image encoder
Cleanup: Destroy video render
Cleanup: Destroy camera
bcm2835-v4l2: bcm2835_mmal_probe: mmal init failed: -3
bcm2835-camera: probe of bcm2835-camera failed with error -3
So restore the old behavior, add an explaining comment and a debug message
to verify that the bug has been fixed in firmware.
Fixes: 52c4dfcead ("Staging: vc04_services: Cleanup in ctrl_set_bitrate()")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The interrupt handler `dt282x_interrupt()` causes a null pointer
dereference for those supported boards that have no analog output
support. For these boards, `dev->write_subdev` will be `NULL` and
therefore the `s_ao` subdevice pointer variable will be `NULL`. In that
case, the following call near the end of the interrupt handler results
in a null pointer dereference:
comedi_handle_events(dev, s_ao);
Fix it by only calling the above function if `s_ao` is valid.
(There are other uses of `s_ao` by the interrupt handler that may or may
not be reached depending on values of hardware registers. Trust that
they are reliable for now.)
Note:
commit 4f6f009b20 ("staging: comedi: dt282x: use comedi_handle_events()")
propagates an earlier error from
commit f21c74fa4c ("staging: comedi: dt282x: use cfc_handle_events()").
Fixes: 4f6f009b20 ("staging: comedi: dt282x: use comedi_handle_events()")
Cc: <stable@vger.kernel.org> # v3.19+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The interrupt handler `pci230_interrupt()` causes a null pointer
dereference for a PCI260 card. There is no analog output subdevice for
a PCI260. The `dev->write_subdev` subdevice pointer and therefore the
`s_ao` subdevice pointer variable will be `NULL` for a PCI260. The
following call near the end of the interrupt handler results in the null
pointer dereference for a PCI260:
comedi_handle_events(dev, s_ao);
Fix it by only calling the above function if `s_ao` is valid.
Note that the other uses of `s_ao` in the calls
`pci230_handle_ao_nofifo(dev, s_ao);` and `pci230_handle_ao_fifo(dev,
s_ao);` will never be reached for a PCI260, so they are safe.
Fixes: 39064f2328 ("staging: comedi: amplc_pci230: use comedi_handle_events()")
Cc: <stable@vger.kernel.org> # v3.19+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of filling in the struct v4l2_capability device_caps
field, fill in the struct video_device device_caps field.
That way the V4L2 core knows what the capabilities of the
video device are.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, we will check if inode layout is compression or inline if
the inode is special in fill_inode(). Also set ->i_mapping->a_ops for
it. That is pointless since the both modes won't be set for special
inode when creating EROFS filesystem image. So, let's avoid it.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should consider the error returned by fill_inline_data() when filling
last page in fill_inode(). If not getting inode will be successful even
though last page is bad. That is illogical. Also change -EAGAIN to 0 in
fill_inline_data() to stand for successful filling.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An earlier patch I sent reduced the stack usage enough to get
below the warning limit, and I could show this was safe, but with
GCC_PLUGIN_STRUCTLEAK_BYREF_ALL, it gets worse again because large stack
variables in the same function no longer overlap:
drivers/staging/rtl8712/rtl871x_ioctl_linux.c: In function 'translate_scan.isra.2':
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:322:1: error: the frame size of 1200 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Split out the largest two blocks in the affected function into two
separate functions and mark those noinline_for_stack.
Fixes: 8c5af16f79 ("staging: rtl8712: reduce stack usage")
Fixes: 81a56f6dcd ("gcc-plugins: structleak: Generalize to all variable types")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change return values of function r8712_setrfreg_cmd from _SUCCESS/_FAIL
to 0/-ENOMEM respectively. Modify call site accordingly.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function r8712_setassocsta_cmd as it is only called by
mp_start_joinbss, which was removed in the previous patch.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function r8712_find_network as all it does is call
_r8712_find_network.
Rename _r8712_find_network to r8712_find_network for compatibility with
call sites.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function r8712_free_evt_priv as all it does is call
_free_evt_priv.
Rename _free_evt_priv to r8712_free_evt_priv to maintain compatibility
with call sites.
Change type of new r8712_free_evt_priv from static to non-static to
match old definition.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function r8712_free_cmd_priv as all it does is call
_free_cmd_priv.
Change type of new r8712_free_cmd_priv from static to non-static to
match definition of original r8712_free_cmd_priv.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change return values of the function r8712_init_evt_priv from
_SUCCESS/_FAIL to 0/-ENOMEM. Modify call site accordingly.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function r8712_init_evt_priv as all it does is call
_init_evt_priv.
Rename _init_evt_priv to r8712_init_evt_priv to maintain compatibility
with call sites.
Change type of new r8712_init_evt_priv from static to non-static as
original r8712_init_evt_priv was non-static.
Change return type of new r8712_init_evt_priv to int as original had
return type u32 but new (formerly _init_evt_priv) had return type sint.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function block_resume as it was only called by
vchiq_arm_force_suspend, which was removed in a previous patch.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function output_timeout_error as it was only called by
vchiq_arm_force_suspend, which was deleted in a previous patch.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch errors:
- spaces required around that '=' (ctx:VxV)
- space required before the open parenthesis '('
- spaces preferred around that '-' (ctx:VxV)
- space required before the open brace '{'
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function is_ap_in_wep() is not used in the driver code, so remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function get_bsstype() is not used in the driver code, so remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_init_default_value() func always returns a value (u8)_SUCCESS.
Modified return type to void to resolve coccicheck warnings
of unneeded variable.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changed return type of function rtw_suspend_wow() to void.
The function always return _SUCCESS and the value is never
checked in the calling function.
Resolves coccicheck Unneeded variable "ret" warning.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coccicheck issues Unneeded variable "ret" warning.
The return value of function rtw_suspend_normal() is set to _SUCCESS.
The return value is never never checked by the calling function.
Modified return type to void to remove the coccicheck warning..
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function rtw_reset_drv_sw() return value is set to _SUCCESS.
The return value is never checked when the function is called.
Modified the return value to void to remove "Unneeded Variable warning
of coccicheck.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function static uint loadparam(struct adapter *padapter, _nic_hdl
pnetdev) return type is modified to void.
The initial return value was always returning _SUCCESS and the return value
is never checked when the function is called.
This resolves coccicheck warnings of unneeded variables.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function hal_init_macaddr() just calls rtw_hal_set_hwreg().
Use rtw_hal_set_hwreg() directly and remove hal_init_macaddr().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup checkpatch issues in usb_halinit.c.
CHECK: Lines should not end with a '('
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobias Nießen