Replace WLAN_LOG_INFO with printk() and remove it.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes the ieee2host16(), ieee2host32(), host2ieee16()
and host2ieee32() macros and replaces them with the generic ones.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the ugly DBFENTER/DBFEXIT macros, which are only inserted to add "<---" and
"--->" at the function start/end at higher debug levels and which make the code
a lot less readable.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move version identifier into p80211netdev.h and rename it to 0.3.0-staging
to differentiate from the out-of-tree version.
Also remove the unused wlan_ethconv declaration.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The header files contain a few comments, which describe the
function of the header element. Remove them where not needed.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace the driver local WLAN_ADDR_LEN constant through the kernel-wide ETH_ALEN definiton.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace all ocurrances of the __WLAN_ATTRIB_PACK__ from wlan_compat.h
by __attribute__((packed)) and remove it afterwards.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The gl_80211.h header file contains only two definitions that are actually
used. Move them to mds_s.h and remove the otherwise unused file.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The ds_tkip.h header file contains declarations of a function that is not
actually defined anywhere.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@ucw.cz>
The bssdscpt.h header file contains definitions that are not actually used for
anything.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As this typedef is used everywhere in the driver, remove it in a separate
patch.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes some typedefs from the driver code. I also removed some
unused structs I spotted while removing the typedefs.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The only remaining thing in common.h header file is the WBDEBUG() macro which
is unconditionally defined as printk(). Kill the macro and remove the header
file.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The DebugUsbdStatusInformation macro doesn't do anything useful so remove the
definition and the two users of it from driver code.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As suggested by Harvey Harrison, convert driver to use ETH_ALEN and kill a
private macro from common.h that is used for the same thing.
Acked-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No need to keep function definitions separate from the rest so unify mto.h and
mto_f.h header files.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I have no idea why the driver would want to include OpenGL headers in the first
place but lets just remove the crazy includes.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Convert code to include sysdef.h directly and remove unnecessary os_common.h
header file.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The header files are not included anywhere so we can just remove them.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes some errors reported by checkpatch.pl
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
fix the following error reported by checkpatch.pl
ERROR: trailing statements should be on next line
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
fix the following error reported by checkpatch.pl
ERROR: do not initialise statics to 0 or NULL
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for downloading the firmware using kernel-builtin mechanism.
This will remove the need for the firmware files in the driver source code.
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add a watchdog timer to take care of link change notifications.
Link changes would now be handled asynchronously as they involve large delays.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix a softlock warning message thrown up by the rtnl_timer.
This was observed during the LTP tests (interface up/down test)
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Read the correct MAC address from EEPROM/Flash.
Without this fix, all the interfaces were using the same MAC address.
This works on Rev B firmware.
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix the problem of the interface not working after a sequence of up-down-up
events. The problem was observed only on systems where the card was using MSI-X
interrupts. On the second time open, the driver did not request MSI-X vector
but was trying to use normal interrupts.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Update the module name in Kconfig help section.
This is a classic case of documentation keeping out of pace with
development
And this was overlooked by me ages ago when we had fixed the Makefile for
sxg_ethtool to compile.
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* The receive rings were getting allocated twice. Once at probe time
and once at open time. This leaked huge amounts of memory.
Fix this leak and now allocation is done only once.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* This patch adds support for controling checksum feature using the ethtool
interface.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the deprecated microcode which was for Rev A.
Now on the driver will use Rev B microcode only.
Signed-off-by: Michael Miles <mmiles@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch makes the Sahara SXG driver use Rev B firmware instead of Rev A.
The firmware version is 1.71
Signed-off-by: Michael Miles <mmiles@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds the new firmware files required by Rev B cards.
Signed-off-by: Michael Miles <mmiles@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Fix a memory leak if allocation of skb fails in sxg_fill_descriptor_block.
In sxg_fill_descriptor_block(), if allocation of skb failed in loop,
we just came out shouting. This rollbacks all the successful operation
before skb allocation fails and then returns.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* This patch adds support for offloading checksum to hardware.
IP checksum have been tested for IPv4 and IPv6.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix staging/sxg napi interface calls:
drivers/staging/sxg/sxg.c:1271: error: implicit declaration of function 'netif_rx_schedule_prep'
linux-next-20090209/drivers/staging/sxg/sxg.c:1272: error: implicit declaration of function '__netif_rx_schedule'
drivers/staging/sxg/sxg.c:1325: error: implicit declaration of function 'netif_rx_complete'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make Sahara SXG driver use MSI-X interrupts instead of line based interrupts
if possible. In case of problems in getting MSI-X vectors or MSI-X not being
supported, driver will fall back to use previous line based interrupts.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix the locking issue of locks in transmit code path.
There was an unnecessary check for interrupt context in transmit code path.
Removed that.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Add NAPI support for SXG driver for Alacritech's 10Gbe products.
The driver will now work in NAPI mode by default.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Add multicast support for SXG driver for Alacritech's 10Gbe products.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: Michael Miles <mmiles@alacritech.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This compiles out some functions that are not being used to keep the
build clean so that we can see the "real" warnings and errors.
Cc: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These variables are never used, so #ifdef them away.
This should probably be fixed up properly from someone who knows why we
are even including these files in the first place, when they do not seem
to be needed at all.
Cc: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
They are not needed here and only cause build warnings and bloat the
object file.
Cc: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Moritz Muehlenhoff