We can't reliably wait in io_ring_ctx_wait_and_kill(), since the
task_works list isn't ordered (in fact it's LIFO ordered). We could
either fix this with a separate task_works list for io_uring work, or
just punt the wait-and-free to async context. This ensures that
task_work that comes in while we're shutting down is processed
correctly. If we don't go async, we could have work past the fput()
work for the ring that depends on work that won't be executed until
after we're done with the wait-and-free. But as this operation is
blocking, it'll never get a chance to run.
This was reproduced with hundreds of thousands of sockets running
memcached, haven't been able to reproduce this synthetically.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If completion queue overflow occurs, __io_cqring_fill_event() will
update req->cflags, which is in a union with req->work and happens to
be aliased to req->work.fs. Following io_free_req() ->
io_req_work_drop_env() may get a bunch of different problems (miscount
fs->users, segfault, etc) on cleaning @fs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't re-read userspace-shared sqe->flags, it can be exploited.
sqe->flags are copied into req->flags in io_submit_sqe(), check them
there instead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_get_req() do two different things: io_kiocb allocation and
initialisation. Move init part out of it and rename into
io_alloc_req(). It's simpler this way and also have better data
locality.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As io_get_sqe() split into 2 stage get/consume, get an sqe before
allocating io_kiocb, so no free_req*() for a failure case is needed,
and inline back __io_req_do_free(), which has only 1 user.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make io_get_sqring() care only about sqes themselves, not initialising
the io_kiocb. Also, split it into get + consume, that will be helpful in
the future.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In io_read_prep() or io_write_prep(), io_req_map_rw() takes
struct io_async_rw's fast_iov as argument to call io_import_iovec(),
and if io_import_iovec() uses struct io_async_rw's fast_iov as
valid iovec array, later indeed io_req_map_rw() does not need
to do the memcpy operation, because they are same pointers.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
OPENAT2 correctly sets O_LARGEFILE if it has to, but that escaped the
OPENAT opcode. Dmitry reports that his test case that compares openat()
and IORING_OP_OPENAT sees failures on large files:
*** sync openat
openat succeeded
sync write at offset 0
write succeeded
sync write at offset 4294967296
write succeeded
*** sync openat
openat succeeded
io_uring write at offset 0
write succeeded
io_uring write at offset 4294967296
write succeeded
*** io_uring openat
openat succeeded
sync write at offset 0
write succeeded
sync write at offset 4294967296
write failed: File too large
*** io_uring openat
openat succeeded
io_uring write at offset 0
write succeeded
io_uring write at offset 4294967296
write failed: File too large
Ensure we set O_LARGEFILE, if force_o_largefile() is true.
Cc: stable@vger.kernel.org # v5.6
Fixes: 15b71abe7b ("io_uring: add support for IORING_OP_OPENAT")
Reported-by: Dmitry Kadashev <dkadashev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An earlier commit "io_uring: remove @nxt from handlers" removed the
setting of pointer nxt and now it is always null, hence the non-null
check and call to io_wq_assign_next is redundant and can be removed.
Addresses-Coverity: ("'Constant' variable guard")
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If io_get_req() fails, it drops a ref. Then, awhile keeping @submitted
unmodified, io_submit_sqes() breaks the loop and puts @nr - @submitted
refs. For each submitted req a ref is dropped in io_put_req() and
friends. So, for @nr taken refs there will be
(@nr - @submitted + @submitted + 1) dropped.
Remove ctx refcounting from io_get_req(), that at the same time makes
it clearer.
Fixes: 2b85edfc0c ("io_uring: batch getting pcpu references")
Cc: stable@vger.kernel.org # v5.6
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A request that completes with an -EAGAIN result after it has been added
to the poll list, will not be removed from that list in io_do_iopoll()
because the f_op->iopoll() will not succeed for that request.
Maintain a retryable local list similar to the done list, and explicity
reissue requests with an -EAGAIN result.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We already checked this limit when the file was opened, and we keep it
open in the file table. Hence when we added unit_inflight to the count
we want to register, we're doubly accounting these files. This results
in -EMFILE for file registration, if we're at half the limit.
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the original task is (or has) exited, then the task work will not get
queued properly. Allow for using the io-wq manager task to queue this
work for execution, and ensure that the io-wq manager notices and runs
this work if woken up (or exiting).
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can have a task exit if it's not the owner of the ring. Be safe and
grab an actual reference to it, to avoid a potential use-after-free.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we get woken and the poll doesn't match our mask, re-add the task
to the poll waitqueue and try again instead of completing the request
with a mask of 0.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add it to pair with prepare_to_wait() in an attempt to avoid
anything weird in the field.
Fixes: b41e98524e ("io_uring: add per-task callback handler")
Reported-by: syzbot+0c3370f235b74b3cfd97@syzkaller.appspotmail.com
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While diving into io_uring fileset register/unregister/update codes, we
found one bug in the fileset update handling. io_uring fileset update
use a percpu_ref variable to check whether we can put the previously
registered file, only when the refcnt of the perfcpu_ref variable
reaches zero, can we safely put these files. But this doesn't work so
well. If applications always issue requests continually, this
perfcpu_ref will never have an chance to reach zero, and it'll always be
in atomic mode, also will defeat the gains introduced by fileset
register/unresiger/update feature, which are used to reduce the atomic
operation overhead of fput/fget.
To fix this issue, while applications do IORING_REGISTER_FILES or
IORING_REGISTER_FILES_UPDATE operations, we allocate a new percpu_ref
and kill the old percpu_ref, new requests will use the new percpu_ref.
Once all previous old requests complete, old percpu_refs will be dropped
and registered files will be put safely.
Link: https://lore.kernel.org/io-uring/5a8dac33-4ca2-4847-b091-f7dcd3ad0ff3@linux.alibaba.com/T/#t
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=bYLJ
-----END PGP SIGNATURE-----
Merge tag 'for-5.7/io_uring-2020-03-29' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"Here are the io_uring changes for this merge window. Light on new
features this time around (just splice + buffer selection), lots of
cleanups, fixes, and improvements to existing support. In particular,
this contains:
- Cleanup fixed file update handling for stack fallback (Hillf)
- Re-work of how pollable async IO is handled, we no longer require
thread offload to handle that. Instead we rely using poll to drive
this, with task_work execution.
- In conjunction with the above, allow expendable buffer selection,
so that poll+recv (for example) no longer has to be a split
operation.
- Make sure we honor RLIMIT_FSIZE for buffered writes
- Add support for splice (Pavel)
- Linked work inheritance fixes and optimizations (Pavel)
- Async work fixes and cleanups (Pavel)
- Improve io-wq locking (Pavel)
- Hashed link write improvements (Pavel)
- SETUP_IOPOLL|SETUP_SQPOLL improvements (Xiaoguang)"
* tag 'for-5.7/io_uring-2020-03-29' of git://git.kernel.dk/linux-block: (54 commits)
io_uring: cleanup io_alloc_async_ctx()
io_uring: fix missing 'return' in comment
io-wq: handle hashed writes in chains
io-uring: drop 'free_pfile' in struct io_file_put
io-uring: drop completion when removing file
io_uring: Fix ->data corruption on re-enqueue
io-wq: close cancel gap for hashed linked work
io_uring: make spdxcheck.py happy
io_uring: honor original task RLIMIT_FSIZE
io-wq: hash dependent work
io-wq: split hashing and enqueueing
io-wq: don't resched if there is no work
io-wq: remove duplicated cancel code
io_uring: fix truncated async read/readv and write/writev retry
io_uring: dual license io_uring.h uapi header
io_uring: io_uring_enter(2) don't poll while SETUP_IOPOLL|SETUP_SQPOLL enabled
io_uring: Fix unused function warnings
io_uring: add end-of-bits marker and build time verify it
io_uring: provide means of removing buffers
io_uring: add IOSQE_BUFFER_SELECT support for IORING_OP_RECVMSG
...
Cleanup io_alloc_async_ctx() a bit, add a new __io_alloc_async_ctx(),
so io_setup_async_rw() won't need to check whether async_ctx is true
or false again.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The missing 'return' work may make it hard for other developers to
understand it.
Signed-off-by: Chucheng Luo <luochucheng@vivo.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sync removal of file is only used in case of a GFP_KERNEL kmalloc
failure at the cost of io_file_put::done and work flush, while a
glich like it can be handled at the call site without too much pain.
That said, what is proposed is to drop sync removing of file, and
the kink in neck as well.
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A case of task hung was reported by syzbot,
INFO: task syz-executor975:9880 blocked for more than 143 seconds.
Not tainted 5.6.0-rc6-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syz-executor975 D27576 9880 9878 0x80004000
Call Trace:
schedule+0xd0/0x2a0 kernel/sched/core.c:4154
schedule_timeout+0x6db/0xba0 kernel/time/timer.c:1871
do_wait_for_common kernel/sched/completion.c:83 [inline]
__wait_for_common kernel/sched/completion.c:104 [inline]
wait_for_common kernel/sched/completion.c:115 [inline]
wait_for_completion+0x26a/0x3c0 kernel/sched/completion.c:136
io_queue_file_removal+0x1af/0x1e0 fs/io_uring.c:5826
__io_sqe_files_update.isra.0+0x3a1/0xb00 fs/io_uring.c:5867
io_sqe_files_update fs/io_uring.c:5918 [inline]
__io_uring_register+0x377/0x2c00 fs/io_uring.c:7131
__do_sys_io_uring_register fs/io_uring.c:7202 [inline]
__se_sys_io_uring_register fs/io_uring.c:7184 [inline]
__x64_sys_io_uring_register+0x192/0x560 fs/io_uring.c:7184
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
and bisect pointed to 05f3fb3c53 ("io_uring: avoid ring quiesce for
fixed file set unregister and update").
It is down to the order that we wait for work done before flushing it
while nobody is likely going to wake us up.
We can drop that completion on stack as flushing work itself is a sync
operation we need and no more is left behind it.
To that end, io_file_put::done is re-used for indicating if it can be
freed in the workqueue worker context.
Reported-and-Inspired-by: syzbot <syzbot+538d1957ce178382a394@syzkaller.appspotmail.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Rename ->done to ->free_pfile
Signed-off-by: Jens Axboe <axboe@kernel.dk>
work->data and work->list are shared in union. io_wq_assign_next() sets
->data if a req having a linked_timeout, but then io-wq may want to use
work->list, e.g. to do re-enqueue of a request, so corrupting ->data.
->data is not necessary, just remove it and extract linked_timeout
through @link_list.
Fixes: 60cf46ae60 ("io-wq: hash dependent work")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the previous fixes for number of files open checking, I added some
debug code to see if we had other spots where we're checking rlimit()
against the async io-wq workers. The only one I found was file size
checking, which we should also honor.
During write and fallocate prep, store the max file size and override
that for the current ask if we're in io-wq worker context.
Cc: stable@vger.kernel.org # 5.1+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just like commit 4022e7af86, this fixes the fact that
IORING_OP_ACCEPT ends up using get_unused_fd_flags(), which checks
current->signal->rlim[] for limits.
Add an extra argument to __sys_accept4_file() that allows us to pass
in the proper nofile limit, and grab it at request prep time.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dmitry reports that a test case shows that io_uring isn't honoring a
modified rlimit nofile setting. get_unused_fd_flags() checks the task
signal->rlimi[] for the limits. As this isn't easily inheritable,
provide a __get_unused_fd_flags() that takes the value instead. Then we
can grab it when the request is prepared (from the original task), and
pass that in when we do the async part part of the open.
Reported-by: Dmitry Kadashev <dkadashev@gmail.com>
Tested-by: Dmitry Kadashev <dkadashev@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's a preparation patch removing io_wq_enqueue_hashed(), which
now should be done by io_wq_hash_work() + io_wq_enqueue().
Also, set hash value for dependant works, and do it as late as possible,
because req->file can be unavailable before. This hash will be ignored
by io-wq.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Processing links, io_submit_sqe() prepares requests, drops sqes, and
passes them with sqe=NULL to io_queue_sqe(). There IOSQE_DRAIN and/or
IOSQE_ASYNC requests will go through the same prep, which doesn't expect
sqe=NULL and fail with NULL pointer deference.
Always do full prepare including io_alloc_async_ctx() for linked
requests, and then it can skip the second preparation.
Cc: stable@vger.kernel.org # 5.5
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure we keep the truncated value, if we did truncate it. If not, we
might read/write more than the registered buffer size.
Also for retry, ensure that we return the truncated mapped value for
the vectorized versions of the read/write commands.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When SETUP_IOPOLL and SETUP_SQPOLL are both enabled, applications don't need
to do io completion events polling again, they can rely on io_sq_thread to do
polling work, which can reduce cpu usage and uring_lock contention.
I modify fio io_uring engine codes a bit to evaluate the performance:
static int fio_ioring_getevents(struct thread_data *td, unsigned int min,
continue;
}
- if (!o->sqpoll_thread) {
+ if (o->sqpoll_thread && o->hipri) {
r = io_uring_enter(ld, 0, actual_min,
IORING_ENTER_GETEVENTS);
if (r < 0) {
and use "fio -name=fiotest -filename=/dev/nvme0n1 -iodepth=$depth -thread
-rw=read -ioengine=io_uring -hipri=1 -sqthread_poll=1 -direct=1 -bs=4k
-size=10G -numjobs=1 -time_based -runtime=120"
original codes
--------------------------------------------------------------------
iodepth | 4 | 8 | 16 | 32 | 64
bw | 1133MB/s | 1519MB/s | 2090MB/s | 2710MB/s | 3012MB/s
fio cpu usage | 100% | 100% | 100% | 100% | 100%
--------------------------------------------------------------------
with patch
--------------------------------------------------------------------
iodepth | 4 | 8 | 16 | 32 | 64
bw | 1196MB/s | 1721MB/s | 2351MB/s | 2977MB/s | 3357MB/s
fio cpu usage | 63.8% | 74.4%% | 81.1% | 83.7% | 82.4%
--------------------------------------------------------------------
bw improve | 5.5% | 13.2% | 12.3% | 9.8% | 11.5%
--------------------------------------------------------------------
From above test results, we can see that bw has above 5.5%~13%
improvement, and fio process's cpu usage also drops much. Note this
won't improve io_sq_thread's cpu usage when SETUP_IOPOLL|SETUP_SQPOLL
are both enabled, in this case, io_sq_thread always has 100% cpu usage.
I think this patch will be friendly to applications which will often use
io_uring_wait_cqe() or similar from liburing.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If CONFIG_NET is not set, gcc warns:
fs/io_uring.c:3110:12: warning: io_setup_async_msg defined but not used [-Wunused-function]
static int io_setup_async_msg(struct io_kiocb *req,
^~~~~~~~~~~~~~~~~~
There are many funcions wraped by CONFIG_NET, move them
together to simplify code, also fix this warning.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Minor tweaks.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Not easy to tell if we're going over the size of bits we can shove
in req->flags, so add an end-of-bits marker and a BUILD_BUG_ON()
check for it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have IORING_OP_PROVIDE_BUFFERS, but the only way to remove buffers
is to trigger IO on them. The usual case of shrinking a buffer pool
would be to just not replenish the buffers when IO completes, and
instead just free it. But it may be nice to have a way to manually
remove a number of buffers from a given group, and
IORING_OP_REMOVE_BUFFERS provides that functionality.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds support for the vectored read. This is limited to supporting
just 1 segment in the iov, and is provided just for convenience for
applications that use IORING_OP_READV already.
The iov helpers will be used for IORING_OP_RECVMSG as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a server process has tons of pending socket connections, generally
it uses epoll to wait for activity. When the socket is ready for reading
(or writing), the task can select a buffer and issue a recv/send on the
given fd.
Now that we have fast (non-async thread) support, a task can have tons
of pending reads or writes pending. But that means they need buffers to
back that data, and if the number of connections is high enough, having
them preallocated for all possible connections is unfeasible.
With IORING_OP_PROVIDE_BUFFERS, an application can register buffers to
use for any request. The request then sets IOSQE_BUFFER_SELECT in the
sqe, and a given group ID in sqe->buf_group. When the fd becomes ready,
a free buffer from the specified group is selected. If none are
available, the request is terminated with -ENOBUFS. If successful, the
CQE on completion will contain the buffer ID chosen in the cqe->flags
member, encoded as:
(buffer_id << IORING_CQE_BUFFER_SHIFT) | IORING_CQE_F_BUFFER;
Once a buffer has been consumed by a request, it is no longer available
and must be registered again with IORING_OP_PROVIDE_BUFFERS.
Requests need to support this feature. For now, IORING_OP_READ and
IORING_OP_RECV support it. This is checked on SQE submission, a CQE with
res == -EOPNOTSUPP will be posted if attempted on unsupported requests.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IORING_OP_PROVIDE_BUFFERS uses the buffer registration infrastructure to
support passing in an addr/len that is associated with a buffer ID and
buffer group ID. The group ID is used to index and lookup the buffers,
while the buffer ID can be used to notify the application which buffer
in the group was used. The addr passed in is the starting buffer address,
and length is each buffer length. A number of buffers to add with can be
specified, in which case addr is incremented by length for each addition,
and each buffer increments the buffer ID specified.
No validation is done of the buffer ID. If the application provides
buffers within the same group with identical buffer IDs, then it'll have
a hard time telling which buffer ID was used. The only restriction is
that the buffer ID can be a max of 16-bits in size, so USHRT_MAX is the
maximum ID that can be used.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After more careful studying, Paul informs me that we cannot rely on
ordering of RCU callbacks in the way that the the tagged commit did.
The current construct looks like this:
void C(struct rcu_head *rhp)
{
do_something(rhp);
call_rcu(&p->rh, B);
}
call_rcu(&p->rh, A);
call_rcu(&p->rh, C);
and we're relying on ordering between A and B, which isn't guaranteed.
Make this explicit instead, and have a work item issue the rcu_barrier()
to ensure that A has run before we manually execute B.
While thorough testing never showed this issue, it's dependent on the
per-cpu load in terms of RCU callbacks. The updated method simplifies
the code as well, and eliminates the need to maintain an rcu_head in
the fileset data.
Fixes: c1e2148f8e ("io_uring: free fixed_file_data after RCU grace period")
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a recipe to deadlock the kernel: submit a timeout sqe with a
linked_timeout (e.g. test_single_link_timeout_ception() from liburing),
and SIGKILL the process.
Then, io_kill_timeouts() takes @ctx->completion_lock, but the timeout
isn't flagged with REQ_F_COMP_LOCKED, and will try to double grab it
during io_put_free() to cancel the linked timeout. Probably, the same
can happen with another io_kill_timeout() call site, that is
io_commit_cqring().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The percpu refcount protects this structure, and we can have an atomic
switch in progress when exiting. This makes it unsafe to just free the
struct normally, and can trigger the following KASAN warning:
BUG: KASAN: use-after-free in percpu_ref_switch_to_atomic_rcu+0xfa/0x1b0
Read of size 1 at addr ffff888181a19a30 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc4+ #5747
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
<IRQ>
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x3b/0x60
? percpu_ref_switch_to_atomic_rcu+0xfa/0x1b0
? percpu_ref_switch_to_atomic_rcu+0xfa/0x1b0
__kasan_report.cold+0x1a/0x3d
? percpu_ref_switch_to_atomic_rcu+0xfa/0x1b0
percpu_ref_switch_to_atomic_rcu+0xfa/0x1b0
rcu_core+0x370/0x830
? percpu_ref_exit+0x50/0x50
? rcu_note_context_switch+0x7b0/0x7b0
? run_rebalance_domains+0x11d/0x140
__do_softirq+0x10a/0x3e9
irq_exit+0xd5/0xe0
smp_apic_timer_interrupt+0x86/0x200
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:default_idle+0x26/0x1f0
Fix this by punting the final exit and free of the struct to RCU, then
we know that it's safe to do so. Jann suggested the approach of using a
double rcu callback to achieve this. It's important that we do a nested
call_rcu() callback, as otherwise the free could be ordered before the
atomic switch, even if the latter was already queued.
Reported-by: syzbot+e017e49c39ab484ac87a@syzkaller.appspotmail.com
Suggested-by: Jann Horn <jannh@google.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This just prepares the ring for having lists of buffers associated with
it, that the application can provide for SQEs to consume instead of
providing their own.
The buffers are organized by group ID.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
First it changes io-wq interfaces. It replaces {get,put}_work() with
free_work(), which guaranteed to be called exactly once. It also enforces
free_work() callback to be non-NULL.
io_uring follows the changes and instead of putting a submission reference
in io_put_req_async_completion(), it will be done in io_free_work(). As
removes io_get_work() with corresponding refcount_inc(), the ref balance
is maintained.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If after dropping the submission reference req->refs == 1, the request
is done, because this one is for io_put_work() and will be dropped
synchronously shortly after. In this case it's safe to steal a next
work from the request.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There will be no use for @nxt in the handlers, and it's doesn't work
anyway, so purge it
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The rule is simple, any async handler gets a submission ref and should
put it at the end. Make them all follow it, and so more consistent.
This is a preparation patch, and as io_wq_assign_next() currently won't
ever work, this doesn't care to use io_put_req_find_next() instead of
io_put_req().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
refcount_inc_not_zero() -> refcount_inc() fix.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Clang warns:
fs/io_uring.c:4178:6: warning: variable 'mask' is used uninitialized
whenever 'if' condition is false [-Wsometimes-uninitialized]
if (def->pollin)
^~~~~~~~~~~
fs/io_uring.c:4182:2: note: uninitialized use occurs here
mask |= POLLERR | POLLPRI;
^~~~
fs/io_uring.c:4178:2: note: remove the 'if' if its condition is always
true
if (def->pollin)
^~~~~~~~~~~~~~~~
fs/io_uring.c:4154:15: note: initialize the variable 'mask' to silence
this warning
__poll_t mask, ret;
^
= 0
1 warning generated.
io_op_defs has many definitions where pollin is not set so mask indeed
might be uninitialized. Initialize it to zero and change the next
assignment to |=, in case further masks are added in the future to avoid
missing changing the assignment then.
Fixes: d7718a9d25 ("io_uring: use poll driven retry for files that support it")
Link: https://github.com/ClangBuiltLinux/linux/issues/916
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq cares about IO_WQ_WORK_UNBOUND flag only while enqueueing, so
it's useless setting it for a next req of a link. Thus, removed it
from io_prep_linked_timeout(), and inline the function.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After __io_queue_sqe() ended up in io_queue_async_work(), it's already
known that there is no @nxt req, so skip the check and return from the
function.
Also, @nxt initialisation now can be done just before
io_put_req_find_next(), as there is no jumping until it's checked.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe