Pull block fixes from Jens Axboe:
"A set of fixes for the current series in the realm of block.
Like the previous pull request, the meat of it are fixes for the nvme
fabrics/target code. Outside of that, just one fix from Gabriel for
not doing a queue suspend if we didn't get the admin queue setup in
the first place"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme-rdma: add back dependency on CONFIG_BLOCK
nvme-rdma: fix null pointer dereference on req->mr
nvme-rdma: use ib_client API to detect device removal
nvme-rdma: add DELETING queue flag
nvme/quirk: Add a delay before checking device ready for memblaze device
nvme: Don't suspend admin queue that wasn't created
nvme-rdma: destroy nvme queue rdma resources on connect failure
nvme_rdma: keep a ref on the ctrl during delete/flush
iw_cxgb4: block module unload until all ep resources are released
iw_cxgb4: call dev_put() on l2t allocation failure
A recent change removed the dependency on BLK_DEV_NVME, which implies
the dependency on PCI and BLOCK. We don't need CONFIG_PCI, but without
CONFIG_BLOCK we get tons of build errors, e.g.
In file included from drivers/nvme/host/core.c:16:0:
linux/blk-mq.h:182:33: error: 'struct gendisk' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
drivers/nvme/host/core.c: In function 'nvme_setup_rw':
drivers/nvme/host/core.c:295:21: error: implicit declaration of function 'rq_data_dir' [-Werror=implicit-function-declaration]
drivers/nvme/host/nvme.h: In function 'nvme_map_len':
drivers/nvme/host/nvme.h:217:6: error: implicit declaration of function 'req_op' [-Werror=implicit-function-declaration]
drivers/nvme/host/scsi.c: In function 'nvme_trans_bdev_limits_page':
drivers/nvme/host/scsi.c:768:85: error: implicit declaration of function 'queue_max_hw_sectors' [-Werror=implicit-function-declaration]
This adds back the specific CONFIG_BLOCK dependency to avoid broken
configurations.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: aa71987472 ("nvme: fabrics drivers don't need the nvme-pci driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
If there is an error on req->mr, req->mr is set to null, however
the following statement sets req->mr->need_inval causing a null
pointer dereference. Fix this by bailing out to label 'out' to
immediately return and hence skip over the offending null pointer
dereference.
Fixes: f5b7b559e1 ("nvme-rdma: Get rid of duplicate variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Change nvme-rdma to use the IB Client API to detect device removal.
This has the wonderful benefit of being able to blow away all the
ib/rdma_cm resources for the device being removed. No craziness about
not destroying the cm_id handling the event. No deadlocks due to broken
iw_cm/rdma_cm/iwarp dependencies. And no need to have a bound cm_id
around during controller recovery/reconnect to catch device removal
events.
We don't use the device_add aspect of the ib_client service since we only
want to create resources for an IB device if we have a target utilizing
that device.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
When we get a surprise disconnect from the target we queue a periodic
reconnect (which is the sane thing to do...).
We only move the queues out of CONNECTED when we retry to reconnect (after
10 seconds in the default case) but we stop the blk queues immediately
so we are not bothered with traffic from now on. If delete() is kicking
off in this period the queues are still in CONNECTED state.
Part of the delete sequence is trying to issue ctrl shutdown if the
admin queue is CONNECTED (which it is!). This request is issued but
stuck in blk-mq waiting for the queues to start again. This might be
the one preventing us from forward progress...
The patch separates the queue flags to CONNECTED and DELETING. Now we
will move out of CONNECTED as soon as error recovery kicks in (before
stopping the queues) and DELETING is on when we start the queue deletion.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Commit aa71987472 ("nvme: fabrics drivers don't need the nvme-pci
driver") removed the dependency on BLK_DEV_NVME, but the cdoe does
depend on the block layer (which used to be an implicit dependency
through BLK_DEV_NVME).
Otherwise you get various errors from the kbuild test robot random
config testing when that happens to hit a configuration with BLOCK
device support disabled.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jay Freyensee <james_p_freyensee@linux.intel.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a regression in my previous commit c21377f836 ("nvme:
Suspend all queues before deletion"), which provoked an Oops in the
removal path when removing a device that became IO incapable very early
at probe (i.e. after a failed EEH recovery).
Turns out, if the error occurred very early at the probe path, before
even configuring the admin queue, we might try to suspend the
uninitialized admin queue, accessing bad memory.
Fixes: c21377f836 ("nvme: Suspend all queues before deletion")
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
After address resolution, the nvme_rdma_queue rdma resources are
allocated. If rdma route resolution or the connect fails, or the
controller reconnect times out and gives up, then the rdma resources
need to be freed. Otherwise, rdma resources are leaked.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimbrg.me>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Sagi writes:
Mostly stability fixes and cleanups:
- NQN endianess fix from Daniel
- possible use-after-free fix from Vincent
- nvme-rdma connect semantics fixes from Jay
- Remove redundant variables in rdma driver
- Kbuild fix from Christoph
- nvmf_host referencing fix from Christoph
- uninit variable fix from Colin
We already have need_inval in ib_mr, lets use
that instead.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
nvme_set_features() callers seem to expect that passing NULL as the
result pointer is acceptable. Teach nvme_set_features() not to try to
write to the NULL address.
For symmetry, make the same change to nvme_get_features(), despite the
fact that all current callers pass a valid result pointer.
I assume that this bug hasn't been reported in practice because
the callers that pass NULL are all in the SCSI translation layer
and no one uses the relevant operations.
Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
So select the NVME_CORE symbol instead of depending on BLK_DEV_NVME.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Without this we'll get a use after free after connecting two controller
using the same hostnqn and then disconnecting one of them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
NVM Express 1.2.1 section 7.9, NVMe Qualified Names, specifies that the
UUID format of NQN uses a UUID based on RFC 4122.
RFC 4122 specifies that the UUID is encoded in big-endian byte order.
Switch the NVMe over Fabrics host ID field from little-endian UUID to
big-endian UUID to match the specification.
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Per NVMe-over-Fabrics 1.0 spec, sqsize is represented as
a 0-based value.
Also per spec, the RDMA binding values shall be set
to sqsize, which makes hsqsize 0-based values.
Thus, the sqsize during NVMf connect() is now:
[root@fedora23-fabrics-host1 for-48]# dmesg
[ 318.720645] nvme_fabrics: nvmf_connect_admin_queue(): sqsize for
admin queue: 31
[ 318.720884] nvme nvme0: creating 16 I/O queues.
[ 318.810114] nvme_fabrics: nvmf_connect_io_queue(): sqsize for i/o
queue: 127
Finally, current interpretation implies hrqsize is 1's based
so set it appropriately.
Reported-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Upon admin queue connect(), the rdma qp was being
set based on NVMF_AQ_DEPTH. However, the fabrics layer was
using the sqsize field value set for I/O queues for the admin
queue, which threw the nvme layer and rdma layer off-whack:
root@fedora23-fabrics-host1 nvmf]# dmesg
[ 3507.798642] nvme_fabrics: nvmf_connect_admin_queue():admin sqsize
being sent is: 128
[ 3507.798858] nvme nvme0: creating 16 I/O queues.
[ 3507.896407] nvme nvme0: new ctrl: NQN "nullside-nqn", addr
192.168.1.3:4420
Thus, to have a different admin queue value, we use
NVMF_AQ_DEPTH for connect() and RDMA private data
as the minimum depth specified in the NVMe-over-Fabrics 1.0 spec
(and in that RDMA private data we treat hrqsize as 1's-based
value, per current understanding of the fabrics spec).
Reported-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The host will be sending sqsize 0-based hsqsize value,
the target need to be adjusted as well.
Signed-off-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Avoid dereferencing the queue pointer in nvmet_rdma_release_queue_work()
after it has been freed by nvmet_rdma_free_queue().
Fixes: d8f7750a08 ("nvmet-rdma: Correctly handle RDMA device hot removal")
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
ret is not initialized so it contains garbage. Ensure garbage
is not returned by initializing rc to 0.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acquiring the nvme_ctrl lock before reading ctrl->state in
nvme_change_ctrl_state() should prevent a theoretical invalid state
transition, in the event of two threads racing inside that function.
I haven't been able to observe this happening with the current code, and
the current state machine seems to be simple enough to not be
affected by these invalid transitions, but future modifications could
make it more likely to happen.
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Reviewed-by: Sagi Grimberg <sag@grimberg.me>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When nvme_delete_queue fails in the first pass of the
nvme_disable_io_queues() loop, we return early, failing to suspend all
of the IO queues. Later, on the nvme_pci_disable path, this causes us
to disable MSI without actually having freed all the IRQs, which
triggers the BUG_ON in free_msi_irqs(), as show below.
This patch refactors nvme_disable_io_queues to suspend all queues before
start submitting delete queue commands. This way, we ensure that we
have at least returned every IRQ before continuing with the removal
path.
[ 487.529200] kernel BUG at ../drivers/pci/msi.c:368!
cpu 0x46: Vector: 700 (Program Check) at [c0000078c5b83650]
pc: c000000000627a50: free_msi_irqs+0x90/0x200
lr: c000000000627a40: free_msi_irqs+0x80/0x200
sp: c0000078c5b838d0
msr: 9000000100029033
current = 0xc0000078c5b40000
paca = 0xc000000002bd7600 softe: 0 irq_happened: 0x01
pid = 1376, comm = kworker/70:1H
kernel BUG at ../drivers/pci/msi.c:368!
Linux version 4.7.0.mainline+ (root@iod76) (gcc version 5.3.1 20160413
(Ubuntu/IBM 5.3.1-14ubuntu2.1) ) #104 SMP Fri Jul 29 09:20:17 CDT 2016
enter ? for help
[c0000078c5b83920] d0000000363b0cd8 nvme_dev_disable+0x208/0x4f0 [nvme]
[c0000078c5b83a10] d0000000363b12a4 nvme_timeout+0xe4/0x250 [nvme]
[c0000078c5b83ad0] c0000000005690e4 blk_mq_rq_timed_out+0x64/0x110
[c0000078c5b83b40] c00000000056c930 bt_for_each+0x160/0x170
[c0000078c5b83bb0] c00000000056d928 blk_mq_queue_tag_busy_iter+0x78/0x110
[c0000078c5b83c00] c0000000005675d8 blk_mq_timeout_work+0xd8/0x1b0
[c0000078c5b83c50] c0000000000e8cf0 process_one_work+0x1e0/0x590
[c0000078c5b83ce0] c0000000000e9148 worker_thread+0xa8/0x660
[c0000078c5b83d80] c0000000000f2090 kthread+0x110/0x130
[c0000078c5b83e30] c0000000000095f0 ret_from_kernel_thread+0x5c/0x6c
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: linux-nvme@lists.infradead.org
Signed-off-by: Jens Axboe <axboe@fb.com>
When we reset or reconnect to a controller, we are cancelling the
async event handler so we can safely re-establish resources, but we
need to remember to start it again when we successfully reconnect.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The host is allowed to issue identify as many times
as it wants, we need to stay consistent when reporting
the serial number for a given controller.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Under extreme conditions this might cause data corruptions. By doing that
we we repost the buffer and then post this buffer for the device to send.
If we happen to use shared receive queues the device might write to the
buffer before it sends it (there is no ordering between send and recv
queues). Without SRQs we probably won't get that if the host doesn't
mis-behave and send more than we allowed it, but relying on that is not
really a good idea.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When configuring a device attached listener, we may
see device removal events. In this case we return a
non-zero return code from the cm event handler which
implicitly destroys the cm_id. It is possible that in
the future the user will remove this listener and by
that trigger a second call to rdma_destroy_id on an
already destroyed cm_id -> BUG.
In addition, when a queue bound (active session) cm_id
generates a DEVICE_REMOVAL event we must guarantee all
resources are cleaned up by the time we return from the
event handler.
Introduce nvmet_rdma_device_removal which addresses
(or at least attempts to) both scenarios.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Relying on ctrl state in nvme_rdma_shutdown_ctrl is wrong because
it will never be NVME_CTRL_LIVE (delete_ctrl or reset_ctrl invoked it).
Instead, check that the admin queue is connected. Note that it is safe
because we can never see a copmeting thread trying to destroy the admin
queue (reset or delete controller).
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
nvme_uninit_ctrl already does that for us. Note that we
reordered nvme_loop_shutdown_ctrl with nvme_uninit_ctrl
but its safe because we want controller uninit to happen
before we shutdown the transport resources.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If we wait until we free the controller (free_ctrl) we might
lose our rdma device without any notification while we still
have open resources (tags mrs and dma mappings).
Instead, destroy the tags with their rdma resources once we
delete the device and not when freeing it.
Note that we don't do that in nvme_rdma_shutdown_ctrl because
controller reset uses it as well and we want to give active I/O
a chance to complete successfully.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
nvme_uninit_ctrl already does that for us. Note that we reordered
nvme_rdma_shutdown_ctrl and nvme_uninit_ctrl, this is perfectly
fine because we actually want ctrl uninit (aen, scan cancellation
and namespaces removal) to happen before we shutdown the rdma
resources.
Also, centralize the deletion work and the dead controller removal
work code duplication into __nvme_rdma_shutdown_ctrl that accepts
a shutdown boolean.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Device removal sequence may have crashed because the
controller (and admin queue space) was freed before
we destroyed the admin queue resources. Thus we
want to destroy the admin queue and only then queue
controller deletion and wait for it to complete.
More specifically we:
1. own the controller deletion (make sure we are not
competing with another deletion).
2. get rid of inflight reconnects if exists (which
also destroy and create queues).
3. destroy the queue.
4. safely queue controller deletion (and wait for it
to complete).
Reported-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
On an ordered target shutdown, the target can send a AEN on a namespace
removal, this will trigger the host to queue ns-list query. The shutdown
will trigger error recovery which will attepmt periodic reconnect.
We can hit a race where the ns rescanning fails (error recovery kicked
in and we're not connected) causing removing all the namespaces and when
we reconnect we won't see any namespaces for this controller.
So, queue a namespace rescan after we successfully reconnected to the target.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Zero out the full nvme_rdma_cm_req structure before sending it.
Otherwise we end up leaking kernel memory in the reserved field, which
might break forward compatibility in the future.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Pull block driver updates from Jens Axboe:
"This branch also contains core changes. I've come to the conclusion
that from 4.9 and forward, I'll be doing just a single branch. We
often have dependencies between core and drivers, and it's hard to
always split them up appropriately without pulling core into drivers
when that happens.
That said, this contains:
- separate secure erase type for the core block layer, from
Christoph.
- set of discard fixes, from Christoph.
- bio shrinking fixes from Christoph, as a followup up to the
op/flags change in the core branch.
- map and append request fixes from Christoph.
- NVMeF (NVMe over Fabrics) code from Christoph. This is pretty
exciting!
- nvme-loop fixes from Arnd.
- removal of ->driverfs_dev from Dan, after providing a
device_add_disk() helper.
- bcache fixes from Bhaktipriya and Yijing.
- cdrom subchannel read fix from Vchannaiah.
- set of lightnvm updates from Wenwei, Matias, Johannes, and Javier.
- set of drbd updates and fixes from Fabian, Lars, and Philipp.
- mg_disk error path fix from Bart.
- user notification for failed device add for loop, from Minfei.
- NVMe in general:
+ NVMe delay quirk from Guilherme.
+ SR-IOV support and command retry limits from Keith.
+ fix for memory-less NUMA node from Masayoshi.
+ use UINT_MAX for discard sectors, from Minfei.
+ cancel IO fixes from Ming.
+ don't allocate unused major, from Neil.
+ error code fixup from Dan.
+ use constants for PSDT/FUSE from James.
+ variable init fix from Jay.
+ fabrics fixes from Ming, Sagi, and Wei.
+ various fixes"
* 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits)
nvme/pci: Provide SR-IOV support
nvme: initialize variable before logical OR'ing it
block: unexport various bio mapping helpers
scsi/osd: open code blk_make_request
target: stop using blk_make_request
block: simplify and export blk_rq_append_bio
block: ensure bios return from blk_get_request are properly initialized
virtio_blk: use blk_rq_map_kern
memstick: don't allow REQ_TYPE_BLOCK_PC requests
block: shrink bio size again
block: simplify and cleanup bvec pool handling
block: get rid of bio_rw and READA
block: don't ignore -EOPNOTSUPP blkdev_issue_write_same
block: introduce BLKDEV_DISCARD_ZERO to fix zeroout
NVMe: don't allocate unused nvme_major
nvme: avoid crashes when node 0 is memoryless node.
nvme: Limit command retries
loop: Make user notify for adding loop device failed
nvme-loop: fix nvme-loop Kconfig dependencies
nvmet: fix return value check in nvmet_subsys_alloc()
...
Pull core block updates from Jens Axboe:
- the big change is the cleanup from Mike Christie, cleaning up our
uses of command types and modified flags. This is what will throw
some merge conflicts
- regression fix for the above for btrfs, from Vincent
- following up to the above, better packing of struct request from
Christoph
- a 2038 fix for blktrace from Arnd
- a few trivial/spelling fixes from Bart Van Assche
- a front merge check fix from Damien, which could cause issues on
SMR drives
- Atari partition fix from Gabriel
- convert cfq to highres timers, since jiffies isn't granular enough
for some devices these days. From Jan and Jeff
- CFQ priority boost fix idle classes, from me
- cleanup series from Ming, improving our bio/bvec iteration
- a direct issue fix for blk-mq from Omar
- fix for plug merging not involving the IO scheduler, like we do for
other types of merges. From Tahsin
- expose DAX type internally and through sysfs. From Toshi and Yigal
* 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits)
block: Fix front merge check
block: do not merge requests without consulting with io scheduler
block: Fix spelling in a source code comment
block: expose QUEUE_FLAG_DAX in sysfs
block: add QUEUE_FLAG_DAX for devices to advertise their DAX support
Btrfs: fix comparison in __btrfs_map_block()
block: atari: Return early for unsupported sector size
Doc: block: Fix a typo in queue-sysfs.txt
cfq-iosched: Charge at least 1 jiffie instead of 1 ns
cfq-iosched: Fix regression in bonnie++ rewrite performance
cfq-iosched: Convert slice_resid from u64 to s64
block: Convert fifo_time from ulong to u64
blktrace: avoid using timespec
block/blk-cgroup.c: Declare local symbols static
block/bio-integrity.c: Add #include "blk.h"
block/partition-generic.c: Remove a set-but-not-used variable
block: bio: kill BIO_MAX_SIZE
cfq-iosched: temporarily boost queue priority for idle classes
block: drbd: avoid to use BIO_MAX_SIZE
block: bio: remove BIO_MAX_SECTORS
...
This registers an sr-iov callback for nvme.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
It is typically not good coding or secure coding practice
to logical OR a variable without an initialization value first.
Here on this line:
integrity.flags |= BLK_INTEGRITY_DEVICE_CAPABLE;
BLK_INTEGRITY_DEVICE_CAPABLE is being OR'ed to a member variable
never set to an initial value. This patch fixes that.
Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>
Reviewed-by: Ming Lin <ming.l@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
blk_get_request is used for BLOCK_PC and similar passthrough requests.
Currently we always need to call blk_rq_set_block_pc or an open coded
version of it to allow appending bios using the request mapping helpers
later on, which is a somewhat awkward API. Instead move the
initialization part of blk_rq_set_block_pc into blk_get_request, so that
we always have a safe to use request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
These two are confusing leftover of the old world order, combining
values of the REQ_OP_ and REQ_ namespaces. For callers that don't
special case we mostly just replace bi_rw with bio_data_dir or
op_is_write, except for the few cases where a switch over the REQ_OP_
values makes more sense. Any check for READA is replaced with an
explicit check for REQ_RAHEAD. Also remove the READA alias for
REQ_RAHEAD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When alloc_disk(0) is used, the ->major number is ignored. All device
numbers are allocated with a major of BLOCK_EXT_MAJOR.
So remove all references to nvme_major.
[akpm@linux-foundation.org: one unregister_blkdev() was missed]
Link: http://lkml.kernel.org/r/20160602064318.4403.93301.stgit@noble
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
We can't sleep with RCU read lock held, but we need to do potentially
blocking stuff to namespace queues when iterating the list. This patch
removes the RCU locking and holds a mutex instead.
To prevent deadlocks, this patch removes holding the mutex during
namespace scanning and removal. The unlocked namespace scanning is made
safe by holding a reference to the namespace being scanned.
List iteration that does IO has to be unlocked to allow error recovery.
The caller must ensure the list can not be manipulated during such an
event, so this patch adds a comment explaining this requirement to the
only function that iterates an unlocked list. All callers currently
meet this requirement, so no further changes required.
List iterations that do not do IO can safely use the lock since it couldn't
block recovery from missing forced IO completions.
Reported-by: Ming Lin <mlin at kernel.org>
[fixes 0bf77e9 nvme: switch to RCU freeing the namespace]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When CONFIG_NUMA is enabled and node 0 is memoryless, the system
crashes because nvme_probe() sets the device->numa_node to 0 by
set_dev_node(&pdev->dev, 0), so it tries to allocate memory from node 0.
To avoid the crash, we should change the 0 to first_memory_node.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Many controller implementations will return errors to commands that will
not succeed, but without the DNR bit set. The driver previously retried
these commands an unlimited number of times until the command timeout
has exceeded, which takes an unnecessarilly long period of time.
This patch limits the number of retries a command can have, defaulting
to 5, but is user tunable at load or runtime.
The struct request's 'retries' field is used to track the number of
retries attempted. This is in contrast with scsi's use of this field,
which indicates how many retries are allowed.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Linus Torvalds