commit 2d4a532d38 ("nfsd: ensure that clp->cl_revoked list is
protected by clp->cl_lock") removed the use of the reaplist to
clean out clp->cl_revoked. It failed to change list_entry() to
walk clp->cl_revoked.next instead of reaplist.next
Fixes: 2d4a532d38 ("nfsd: ensure that clp->cl_revoked list is protected by clp->cl_lock")
Cc: stable@vger.kernel.org
Reported-by: Eric Meddaugh <etmsys@rit.edu>
Tested-by: Eric Meddaugh <etmsys@rit.edu>
Signed-off-by: Andrew Elble <aweits@rit.edu>
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Convert the following where appropriate:
(1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).
(2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).
(3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more
complicated than it appears as some calls should be converted to
d_can_lookup() instead. The difference is whether the directory in
question is a real dir with a ->lookup op or whether it's a fake dir with
a ->d_automount op.
In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).
Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer. In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.
However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.
There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was
intended for special directory entry types that don't have attached inodes.
The following perl+coccinelle script was used:
use strict;
my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
print "No matches\n";
exit(0);
}
my @cocci = (
'@@',
'expression E;',
'@@',
'',
'- S_ISLNK(E->d_inode->i_mode)',
'+ d_is_symlink(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISDIR(E->d_inode->i_mode)',
'+ d_is_dir(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISREG(E->d_inode->i_mode)',
'+ d_is_reg(E)' );
my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);
foreach my $file (@callers) {
chomp $file;
print "Processing ", $file, "\n";
system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
die "spatch failed";
}
[AV: overlayfs parts skipped]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Includes of pnfs.h in export.c and fcntl.c also bring in xdr4.h, which
won't build without CONFIG_NFSD_V3, breaking non-V3 builds. Ifdef-out
most of pnfs.h in that case.
Reported-by: Bas Peters <baspeters93@gmail.com>
Reported-by: Jim Davis <jim.epost@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 9cf514ccfa "nfsd: implement pNFS operations"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're supposed to be testing that the fh_fsid's match but because the
parenthesis are in the wrong place, then we only check the first
byte.
Fixes: 9558f2500a ('nfsd: add fh_fsid_match helper')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The code seems to work. The protocol looks stable. The kernel's
version defaults can be overridden by rpc.nfsd arguments.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a small shim between core nfsd and filesystems to translate the
somewhat cumbersome pNFS data structures and semantics to something
more palatable for Linux filesystems.
Thanks to Rick McNeal for the old prototype pNFS blocklayout server
code, which gave a lot of inspiration to this version even if no
code is left from it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
For now just a few simple events to trace the layout stateid lifetime, but
these already were enough to find several bugs in the Linux client layout
stateid handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add support to issue layout recalls to clients. For now we only support
full-file recalls to get a simple and stable implementation. This allows
to embedd a nfsd4_callback structure in the layout_state and thus avoid
any memory allocations under spinlocks during a recall. For normal
use cases that do not intent to share a single file between multiple
clients this implementation is fully sufficient.
To ensure layouts are recalled on local filesystem access each layout
state registers a new FL_LAYOUT lease with the kernel file locking code,
which filesystems that support pNFS exports that require recalls need
to break on conflicting access patterns.
The XDR code is based on the old pNFS server implementation by
Andy Adamson, Benny Halevy, Boaz Harrosh, Dean Hildebrand, Fred Isaman,
Marc Eshel, Mike Sager and Ricardo Labiaga.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add support for the GETDEVICEINFO, LAYOUTGET, LAYOUTCOMMIT and
LAYOUTRETURN NFSv4.1 operations, as well as backing code to manage
outstanding layouts and devices.
Layout management is very straight forward, with a nfs4_layout_stateid
structure that extends nfs4_stid to manage layout stateids as the
top-level structure. It is linked into the nfs4_file and nfs4_client
structures like the other stateids, and contains a linked list of
layouts that hang of the stateid. The actual layout operations are
implemented in layout drivers that are not part of this commit, but
will be added later.
The worst part of this commit is the management of the pNFS device IDs,
which suffers from a specification that is not sanely implementable due
to the fact that the device-IDs are global and not bound to an export,
and have a small enough size so that we can't store the fsid portion of
a file handle, and must never be reused. As we still do need perform all
export authentication and validation checks on a device ID passed to
GETDEVICEINFO we are caught between a rock and a hard place. To work
around this issue we add a new hash that maps from a 64-bit integer to a
fsid so that we can look up the export to authenticate against it,
a 32-bit integer as a generation that we can bump when changing the device,
and a currently unused 32-bit integer that could be used in the future
to handle more than a single device per export. Entries in this hash
table are never deleted as we can't reuse the ids anyway, and would have
a severe lifetime problem anyway as Linux export structures are temporary
structures that can go away under load.
Parts of the XDR data, structures and marshaling/unmarshaling code, as
well as many concepts are derived from the old pNFS server implementation
from Andy Adamson, Benny Halevy, Dean Hildebrand, Marc Eshel, Fred Isaman,
Mike Sager, Ricardo Labiaga and many others.
Signed-off-by: Christoph Hellwig <hch@lst.de>
The pnfs code will need it too. Also remove the nfsd_ prefix to match the
other filehandle helpers in that file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Just like for other lock types we should allow different owners to have
a read lease on a file. Currently this can't happen, but with the addition
of pNFS layout leases we'll need this feature.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Someone with a weird time_t happened to notice this, it shouldn't really
manifest till 2038. It may not be our ownly year-2038 problem.
Reported-by: Aaron Pace <Aaron.Pace@alcatel-lucent.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that we use standard list_heads for tracking leases, we can have
lm_change take a pointer to the lease to be modified instead of a
double pointer.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Acked-by: Christoph Hellwig <hch@lst.de>
We can now add a dedicated spinlock without expanding struct inode.
Change to using that to protect the various i_flctx lists.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Remove the function renew_client() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RFC 3530 14.2.24 says
This value represents the length of the names of the directory
entries and the cookie value for these entries. This length
represents the XDR encoding of the data (names and cookies)...
The "xdr encoding" of the name should probably include the 4 bytes for
the length.
But this is all just a hint so not worth e.g. backporting to stable.
Also reshuffle some lines to more clearly group together the
dircount-related code.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
fi_delegees is always handled under the fi_lock, so there's no need to
use an atomic_t for this field.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, nfs4_set_delegation takes a reference to an existing
delegation and then checks to see if there is a conflict. If there is
one, then it doesn't release that reference.
Change the code to take the reference after the check and only if there
is no conflict.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull nfsd updates from Bruce Fields:
"A comparatively quieter cycle for nfsd this time, but still with two
larger changes:
- RPC server scalability improvements from Jeff Layton (using RCU
instead of a spinlock to find idle threads).
- server-side NFSv4.2 ALLOCATE/DEALLOCATE support from Anna
Schumaker, enabling fallocate on new clients"
* 'for-3.19' of git://linux-nfs.org/~bfields/linux: (32 commits)
nfsd4: fix xdr4 count of server in fs_location4
nfsd4: fix xdr4 inclusion of escaped char
sunrpc/cache: convert to use string_escape_str()
sunrpc: only call test_bit once in svc_xprt_received
fs: nfsd: Fix signedness bug in compare_blob
sunrpc: add some tracepoints around enqueue and dequeue of svc_xprt
sunrpc: convert to lockless lookup of queued server threads
sunrpc: fix potential races in pool_stats collection
sunrpc: add a rcu_head to svc_rqst and use kfree_rcu to free it
sunrpc: require svc_create callers to pass in meaningful shutdown routine
sunrpc: have svc_wake_up only deal with pool 0
sunrpc: convert sp_task_pending flag to use atomic bitops
sunrpc: move rq_cachetype field to better optimize space
sunrpc: move rq_splice_ok flag into rq_flags
sunrpc: move rq_dropme flag into rq_flags
sunrpc: move rq_usedeferral flag to rq_flags
sunrpc: move rq_local field to rq_flags
sunrpc: add a generic rq_flags field to svc_rqst and move rq_secure to it
nfsd: minor off by one checks in __write_versions()
sunrpc: release svc_pool_map reference when serv allocation fails
...
Pull networking updates from David Miller:
1) New offloading infrastructure and example 'rocker' driver for
offloading of switching and routing to hardware.
This work was done by a large group of dedicated individuals, not
limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend,
Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu
2) Start making the networking operate on IOV iterators instead of
modifying iov objects in-situ during transfers. Thanks to Al Viro
and Herbert Xu.
3) A set of new netlink interfaces for the TIPC stack, from Richard
Alpe.
4) Remove unnecessary looping during ipv6 routing lookups, from Martin
KaFai Lau.
5) Add PAUSE frame generation support to gianfar driver, from Matei
Pavaluca.
6) Allow for larger reordering levels in TCP, which are easily
achievable in the real world right now, from Eric Dumazet.
7) Add a variable of napi_schedule that doesn't need to disable cpu
interrupts, from Eric Dumazet.
8) Use a doubly linked list to optimize neigh_parms_release(), from
Nicolas Dichtel.
9) Various enhancements to the kernel BPF verifier, and allow eBPF
programs to actually be attached to sockets. From Alexei
Starovoitov.
10) Support TSO/LSO in sunvnet driver, from David L Stevens.
11) Allow controlling ECN usage via routing metrics, from Florian
Westphal.
12) Remote checksum offload, from Tom Herbert.
13) Add split-header receive, BQL, and xmit_more support to amd-xgbe
driver, from Thomas Lendacky.
14) Add MPLS support to openvswitch, from Simon Horman.
15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen
Klassert.
16) Do gro flushes on a per-device basis using a timer, from Eric
Dumazet. This tries to resolve the conflicting goals between the
desired handling of bulk vs. RPC-like traffic.
17) Allow userspace to ask for the CPU upon what a packet was
received/steered, via SO_INCOMING_CPU. From Eric Dumazet.
18) Limit GSO packets to half the current congestion window, from Eric
Dumazet.
19) Add a generic helper so that all drivers set their RSS keys in a
consistent way, from Eric Dumazet.
20) Add xmit_more support to enic driver, from Govindarajulu
Varadarajan.
21) Add VLAN packet scheduler action, from Jiri Pirko.
22) Support configurable RSS hash functions via ethtool, from Eyal
Perry.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits)
Fix race condition between vxlan_sock_add and vxlan_sock_release
net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header
net/mlx4: Add support for A0 steering
net/mlx4: Refactor QUERY_PORT
net/mlx4_core: Add explicit error message when rule doesn't meet configuration
net/mlx4: Add A0 hybrid steering
net/mlx4: Add mlx4_bitmap zone allocator
net/mlx4: Add a check if there are too many reserved QPs
net/mlx4: Change QP allocation scheme
net/mlx4_core: Use tasklet for user-space CQ completion events
net/mlx4_core: Mask out host side virtualization features for guests
net/mlx4_en: Set csum level for encapsulated packets
be2net: Export tunnel offloads only when a VxLAN tunnel is created
gianfar: Fix dma check map error when DMA_API_DEBUG is enabled
cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call
net: fec: only enable mdio interrupt before phy device link up
net: fec: clear all interrupt events to support i.MX6SX
net: fec: reset fep link status in suspend function
net: sock: fix access via invalid file descriptor
net: introduce helper macro for_each_cmsghdr
...
Pull VFS changes from Al Viro:
"First pile out of several (there _definitely_ will be more). Stuff in
this one:
- unification of d_splice_alias()/d_materialize_unique()
- iov_iter rewrite
- killing a bunch of ->f_path.dentry users (and f_dentry macro).
Getting that completed will make life much simpler for
unionmount/overlayfs, since then we'll be able to limit the places
sensitive to file _dentry_ to reasonably few. Which allows to have
file_inode(file) pointing to inode in a covered layer, with dentry
pointing to (negative) dentry in union one.
Still not complete, but much closer now.
- crapectomy in lustre (dead code removal, mostly)
- "let's make seq_printf return nothing" preparations
- assorted cleanups and fixes
There _definitely_ will be more piles"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
copy_from_iter_nocache()
new helper: iov_iter_kvec()
csum_and_copy_..._iter()
iov_iter.c: handle ITER_KVEC directly
iov_iter.c: convert copy_to_iter() to iterate_and_advance
iov_iter.c: convert copy_from_iter() to iterate_and_advance
iov_iter.c: get rid of bvec_copy_page_{to,from}_iter()
iov_iter.c: convert iov_iter_zero() to iterate_and_advance
iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds
iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds
iov_iter.c: convert iov_iter_npages() to iterate_all_kinds
iov_iter.c: iterate_and_advance
iov_iter.c: macros for iterating over iov_iter
kill f_dentry macro
dcache: fix kmemcheck warning in switch_names
new helper: audit_file()
nfsd_vfs_write(): use file_inode()
ncpfs: use file_inode()
kill f_dentry uses
lockd: get rid of ->f_path.dentry->d_sb
...
This patch effectively reverts commit 500f808726 ("net: ovs: use CRC32
accelerated flow hash if available"), and other remaining arch_fast_hash()
users such as from nfsd via commit 6282cd5655 ("NFSD: Don't hand out
delegations for 30 seconds after recalling them.") where it has been used
as a hash function for bloom filtering.
While we think that these users are actually not much of concern, it has
been requested to remove the arch_fast_hash() library bits that arose
from [1] entirely as per recent discussion [2]. The main argument is that
using it as a hash may introduce bias due to its linearity (see avalanche
criterion) and thus makes it less clear (though we tried to document that)
when this security/performance trade-off is actually acceptable for a
general purpose library function.
Lets therefore avoid any further confusion on this matter and remove it to
prevent any future accidental misuse of it. For the time being, this is
going to make hashing of flow keys a bit more expensive in the ovs case,
but future work could reevaluate a different hashing discipline.
[1] https://patchwork.ozlabs.org/patch/299369/
[2] https://patchwork.ozlabs.org/patch/418756/
Cc: Neil Brown <neilb@suse.de>
Cc: Francesco Fusco <fusco@ntop.org>
Cc: Jesse Gross <jesse@nicira.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a bug where nfsd4_encode_components_esc() incorrectly calculates the
length of server array in fs_location4--note that it is a count of the
number of array elements, not a length in bytes.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: 082d4bd72a (nfsd4: "backfill" using write_bytes_to_xdr_buf)
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix a bug where nfsd4_encode_components_esc() includes the esc_end char as
an additional string encoding.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org
Fixes: e7a0444aef "nfsd: add IPv6 addr escaping to fs_location hosts"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Bugs similar to the one in acbbe6fbb2 (kcmp: fix standard comparison
bug) are in rich supply.
In this variant, the problem is that struct xdr_netobj::len has type
unsigned int, so the expression o1->len - o2->len _also_ has type
unsigned int; it has completely well-defined semantics, and the result
is some non-negative integer, which is always representable in a long
long. But this means that if the conditional triggers, we are
guaranteed to return a positive value from compare_blob.
In this case it could be fixed by
- res = o1->len - o2->len;
+ res = (long long)o1->len - (long long)o2->len;
but I'd rather eliminate the usually broken 'return a - b;' idiom.
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In a later patch, we're going to need some atomic bit flags. Since that
field will need to be an unsigned long, we mitigate that space
consumption by migrating some other bitflags to the new field. Start
with the rq_secure flag.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
My static checker complains that if "len == remaining" then it means we
have truncated the last character off the version string.
The intent of the code is that we print as many versions as we can
without truncating a version. Then we put a newline at the end. If the
newline can't fit we return -EINVAL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The currect code for nfsd41_cb_get_slot() and nfsd4_cb_done() has no
locking in order to guarantee atomicity, and so allows for races of
the form.
Task 1 Task 2
====== ======
if (test_and_set_bit(0) != 0) {
clear_bit(0)
rpc_wake_up_next(queue)
rpc_sleep_on(queue)
return false;
}
This patch breaks the race condition by adding a retest of the bit
after the call to rpc_sleep_on().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Even when security labels are disabled we support at least the same
attributes as v4.1.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The global state_lock protects the file_hashtbl, and that has the
potential to be a scalability bottleneck.
Address this by making the file_hashtbl use RCU. Add a rcu_head to the
nfs4_file and use that when freeing ones that have been hashed. In order
to conserve space, we union the fi_rcu field with the fi_delegations
list_head which must be clear by the time the last reference to the file
is dropped.
Convert find_file_locked to use RCU lookup primitives and not to require
that the state_lock be held, and convert find_file to do a lockless
lookup. Convert find_or_add_file to attempt a lockless lookup first, and
then fall back to doing a locked search and insert if that fails to find
anything.
Also, minimize the number of times we need to calculate the hash value
by passing it in as an argument to the search and insert functions, and
optimize the order of arguments in nfsd4_init_file.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
DEALLOCATE only returns a status value, meaning we can use the noop()
xdr encoder to reply to the client.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The ALLOCATE operation is used to preallocate space in a file. I can do
this by using vfs_fallocate() to do the actual preallocation.
ALLOCATE only returns a status indicator, so we don't need to write a
special encode() function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
They're a bit outdated wrt to some recent changes.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A client may not want to use the back channel on a transport it sent
CREATE_SESSION on, in which case it clears SESSION4_BACK_CHAN.
However, cl_cb_addr should be populated anyway, to be used if the
client binds other connections to this session. If cl_cb_addr is
not initialized, rpc_create() fails when the server attempts to
set up a back channel on such secondary transports.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The vfs_fsync_range() call during write processing got the end of the
range off by one. The range is inclusive, not exclusive. The error has
nfsd sync more data than requested -- it's correct but unnecessary
overhead.
The call during commit processing is correct so I copied that pattern in
write processing. Maybe a helper would be nice but I kept it trivial.
This is untested. I found it while reviewing code for something else
entirely.
Signed-off-by: Zach Brown <zab@zabbo.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Unknown operation numbers are caught in nfsd4_decode_compound() which
sets op->opnum to OP_ILLEGAL and op->status to nfserr_op_illegal. The
error causes the main loop in nfsd4_proc_compound() to skip most
processing. But nfsd4_proc_compound also peeks ahead at the next
operation in one case and doesn't take similar precautions there.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We added this new estimator function but forgot to hook it up. The
effect is that NFSv4.1 (and greater) won't do zero-copy reads.
The estimate was also wrong by 8 bytes.
Fixes: ccae70a9ee "nfsd4: estimate sequence response size"
Cc: stable@vger.kernel.org
Reported-by: Chuck Lever <chucklever@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave
Hansen)
- Various sched/idle refinements for better idle handling (Nicolas
Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot)
- sched/numa updates and optimizations (Rik van Riel)
- sysbench speedup (Vincent Guittot)
- capacity calculation cleanups/refactoring (Vincent Guittot)
- Various cleanups to thread group iteration (Oleg Nesterov)
- Double-rq-lock removal optimization and various refactorings
(Kirill Tkhai)
- various sched/deadline fixes
... and lots of other changes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/dl: Use dl_bw_of() under rcu_read_lock_sched()
sched/fair: Delete resched_cpu() from idle_balance()
sched, time: Fix build error with 64 bit cputime_t on 32 bit systems
sched: Improve sysbench performance by fixing spurious active migration
sched/x86: Fix up typo in topology detection
x86, sched: Add new topology for multi-NUMA-node CPUs
sched/rt: Use resched_curr() in task_tick_rt()
sched: Use rq->rd in sched_setaffinity() under RCU read lock
sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask'
sched: Use dl_bw_of() under RCU read lock
sched/fair: Remove duplicate code from can_migrate_task()
sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW
sched: print_rq(): Don't use tasklist_lock
sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock()
sched: Fix the task-group check in tg_has_rt_tasks()
sched/fair: Leverage the idle state info when choosing the "idlest" cpu
sched: Let the scheduler see CPU idle states
sched/deadline: Fix inter- exclusive cpusets migrations
sched/deadline: Clear dl_entity params when setscheduling to different class
sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault()
...
Pull security subsystem updates from James Morris.
Mostly ima, selinux, smack and key handling updates.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits)
integrity: do zero padding of the key id
KEYS: output last portion of fingerprint in /proc/keys
KEYS: strip 'id:' from ca_keyid
KEYS: use swapped SKID for performing partial matching
KEYS: Restore partial ID matching functionality for asymmetric keys
X.509: If available, use the raw subjKeyId to form the key description
KEYS: handle error code encoded in pointer
selinux: normalize audit log formatting
selinux: cleanup error reporting in selinux_nlmsg_perm()
KEYS: Check hex2bin()'s return when generating an asymmetric key ID
ima: detect violations for mmaped files
ima: fix race condition on ima_rdwr_violation_check and process_measurement
ima: added ima_policy_flag variable
ima: return an error code from ima_add_boot_aggregate()
ima: provide 'ima_appraise=log' kernel option
ima: move keyring initialization to ima_init()
PKCS#7: Handle PKCS#7 messages that contain no X.509 certs
PKCS#7: Better handling of unsupported crypto
KEYS: Overhaul key identification when searching for asymmetric keys
KEYS: Implement binary asymmetric key ID handling
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Hhee
-----END PGP SIGNATURE-----
Merge tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linux
Pull file locking related changes from Jeff Layton:
"This release is a little more busy for file locking changes than the
last:
- a set of patches from Kinglong Mee to fix the lockowner handling in
knfsd
- a pile of cleanups to the internal file lease API. This should get
us a bit closer to allowing for setlease methods that can block.
There are some dependencies between mine and Bruce's trees this cycle,
and I based my tree on top of the requisite patches in Bruce's tree"
* tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linux: (26 commits)
locks: fix fcntl_setlease/getlease return when !CONFIG_FILE_LOCKING
locks: flock_make_lock should return a struct file_lock (or PTR_ERR)
locks: set fl_owner for leases to filp instead of current->files
locks: give lm_break a return value
locks: __break_lease cleanup in preparation of allowing direct removal of leases
locks: remove i_have_this_lease check from __break_lease
locks: move freeing of leases outside of i_lock
locks: move i_lock acquisition into generic_*_lease handlers
locks: define a lm_setup handler for leases
locks: plumb a "priv" pointer into the setlease routines
nfsd: don't keep a pointer to the lease in nfs4_file
locks: clean up vfs_setlease kerneldoc comments
locks: generic_delete_lease doesn't need a file_lock at all
nfsd: fix potential lease memory leak in nfs4_setlease
locks: close potential race in lease_get_mtime
security: make security_file_set_fowner, f_setown and __f_setown void return
locks: consolidate "nolease" routines
locks: remove lock_may_read and lock_may_write
lockd: rip out deferred lock handling from testlock codepath
NFSD: Get reference of lockowner when coping file_lock
...
Pull nfsd updates from Bruce Fields:
"Highlights:
- support the NFSv4.2 SEEK operation (allowing clients to support
SEEK_HOLE/SEEK_DATA), thanks to Anna.
- end the grace period early in a number of cases, mitigating a
long-standing annoyance, thanks to Jeff
- improve SMP scalability, thanks to Trond"
* 'for-3.18' of git://linux-nfs.org/~bfields/linux: (55 commits)
nfsd: eliminate "to_delegation" define
NFSD: Implement SEEK
NFSD: Add generic v4.2 infrastructure
svcrdma: advertise the correct max payload
nfsd: introduce nfsd4_callback_ops
nfsd: split nfsd4_callback initialization and use
nfsd: introduce a generic nfsd4_cb
nfsd: remove nfsd4_callback.cb_op
nfsd: do not clear rpc_resp in nfsd4_cb_done_sequence
nfsd: fix nfsd4_cb_recall_done error handling
nfsd4: clarify how grace period ends
nfsd4: stop grace_time update at end of grace period
nfsd: skip subsequent UMH "create" operations after the first one for v4.0 clients
nfsd: set and test NFSD4_CLIENT_STABLE bit to reduce nfsdcltrack upcalls
nfsd: serialize nfsdcltrack upcalls for a particular client
nfsd: pass extra info in env vars to upcalls to allow for early grace period end
nfsd: add a v4_end_grace file to /proc/fs/nfsd
lockd: add a /proc/fs/lockd/nlm_end_grace file
nfsd: reject reclaim request when client has already sent RECLAIM_COMPLETE
nfsd: remove redundant boot_time parm from grace_done client tracking op
...
Christoph suggests:
"Add a return value to lm_break so that the lock manager can tell the
core code "you can delete this lease right now". That gets rid of
the games with the timeout which require all kinds of race avoidance
code in the users."
Do that here and have the nfsd lease break routine use it when it detects
that there was a race between setting up the lease and it being broken.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There was only one place where we still could free a file_lock while
holding the i_lock -- lease_modify. Add a new list_head argument to the
lm_change operation, pass in a private list when calling it, and fix
those callers to dispose of the list once the lock has been dropped.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
...and move the fasync setup into it for fcntl lease calls. At the same
time, change the semantics of how the file_lock double-pointer is
handled. Up until now, on a successful lease return you got a pointer to
the lock on the list. This is bad, since that pointer can no longer be
relied on as valid once the inode->i_lock has been released.
Change the code to instead just zero out the pointer if the lease we
passed in ended up being used. Then the callers can just check to see
if it's NULL after the call and free it if it isn't.
The priv argument has the same semantics. The lm_setup function can
zero the pointer out to signal to the caller that it should not be
freed after the function returns.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In later patches, we're going to add a new lock_manager_operation to
finish setting up the lease while still holding the i_lock. To do
this, we'll need to pass a little bit of info in the fcntl setlease
case (primarily an fasync structure). Plumb the extra pointer into
there in advance of that.
We declare this pointer as a void ** to make it clear that this is
private info, and that the caller isn't required to set this unless
the lm_setup specifically requires it.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we don't need to pass in an actual lease pointer to
vfs_setlease on unlock, we can stop tracking a pointer to the lease in
the nfs4_file.
Switch all of the places that check the fi_lease to check fi_deleg_file
instead. We always set that at the same time so it will have the same
semantics.
Cc: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Ensure that it's OK to pass in a NULL file_lock double pointer on
a F_UNLCK request and convert the vfs_setlease F_UNLCK callers to
do just that.
Finally, turn the BUG_ON in generic_setlease into a WARN_ON_ONCE
with an error return. That's a problem we can handle without
crashing the box if it occurs.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
It's unlikely to ever occur, but if there were already a lease set on
the file then we could end up getting back a different pointer on a
successful setlease attempt than the one we allocated. If that happens,
the one we allocated could leak.
In practice, I don't think this will happen due to the fact that we only
try to set up the lease once per nfs4_file, but this error handling is a
bit more correct given the current lease API.
Cc: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We now have cb_to_delegation and to_delegation, which do the same thing
and are defined separately in different .c files. Move the
cb_to_delegation definition into a header file and eliminate the
redundant to_delegation definition.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
The calculation of page_ptr here is wrong in the case the read doesn't
start at an offset that is a multiple of a page.
The result is that nfs4svc_encode_compoundres sets rq_next_page to a
value one too small, and then the loop in svc_free_res_pages may
incorrectly fail to clear a page pointer in rq_respages[].
Pages left in rq_respages[] are available for the next rpc request to
use, so xdr data may be written to that page, which may hold data still
waiting to be transmitted to the client or data in the page cache.
The observed result was silent data corruption seen on an NFSv4 client.
We tag this as "fixing" 05638dc73a because that commit exposed this
bug, though the incorrect calculation predates it.
Particular thanks to Andrea Arcangeli and David Gilbert for analysis and
testing.
Fixes: 05638dc73a "nfsd4: simplify server xdr->next_page use"
Cc: stable@vger.kernel.org
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch adds server support for the NFS v4.2 operation SEEK, which
returns the position of the next hole or data segment in a file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's cleaner to introduce everything at once and have the server reply
with "not supported" than it would be to introduce extra operations when
implementing a specific one in the middle of the list.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a higher level abstraction than the rpc_ops for callback operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Split out initializing the nfs4_callback structure from using it. For
the NULL callback this gets rid of tons of pointless re-initializations.
Note that I don't quite understand what protects us from running multiple
NULL callbacks at the same time, but at least this chance doesn't make
it worse..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a helper to queue up a callback. CB_NULL has a bit of special casing
because it is special in the specification, but all other new callback
operations will be able to share code with this and a few more changes
to refactor the callback code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We can always get at the private data by using container_of, no need for
a void pointer. Also introduce a little to_delegation helper to avoid
opencoding the container_of everywhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is incorrect when a callback is has to be restarted, in which case
the XDR decoding of the second iteration will see a NULL cb argument.
[hch: updated description]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For any error that is not EBADHANDLE or NFS4ERR_BAD_STATEID,
nfsd4_cb_recall_done first marks the connection down, then
retries until dl_retries hits zero, then marks the connection down
again and sets cb_done. This changes the code to only retry
for EBADHANDLE or NFS4ERR_BAD_STATEID, and factors setting
cb_done into a single point in the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The grace period is ended in two steps--first userland is notified that
the grace period is now long enough that any clients who have not yet
reclaimed can be safely forgotten, then we flip the switch that forbids
reclaims and allows new opens. I had to think a bit to convince myself
that the ordering was right here. Document it.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The attempt to automatically set a new grace period time at the end of
the grace period isn't really helpful. We'll probably shut down and
reboot before we actually make use of the new grace period time anyway.
So may as well leave it up to the init system to get this right.
This just confuses people when they see /proc/fs/nfsd/nfsv4gracetime
change from what they set it to.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the case of v4.0 clients, we may call into the "create" client
tracking operation multiple times (once for each openowner). Upcalling
for each one of those is wasteful and slow however. We can skip doing
further "create" operations after the first one if we know that one has
already been done.
v4.1+ clients generally only call into this function once (on
RECLAIM_COMPLETE), and we can't skip upcalling on the create even if the
STABLE bit is set. Doing so would make it impossible for nfsdcltrack to
lift the grace period early since the timestamp has a different meaning
in the case where the client is expected to issue a RECLAIM_COMPLETE.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
The nfsdcltrack upcall doesn't utilize the NFSD4_CLIENT_STABLE flag,
which basically results in an upcall every time we call into the client
tracking ops.
Change it to set this bit on a successful "check" or "create" request,
and clear it on a "remove" request. Also, check to see if that bit is
set before upcalling on a "check" or "remove" request, and skip
upcalling appropriately, depending on its state.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
In a later patch, we want to add a flag that will allow us to reduce the
need for upcalls. In order to handle that correctly, we'll need to
ensure that racing upcalls for the same client can't occur. In practice
it should be rare for this to occur with a well-behaved client, but it
is possible.
Convert one of the bits in the cl_flags field to be an upcall bitlock,
and use it to ensure that upcalls for the same client are serialized.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
In order to support lifting the grace period early, we must tell
nfsdcltrack what sort of client the "create" upcall is for. We can't
reliably tell if a v4.0 client has completed reclaiming, so we can only
lift the grace period once all the v4.1+ clients have issued a
RECLAIM_COMPLETE and if there are no v4.0 clients.
Also, in order to lift the grace period, we have to tell userland when
the grace period started so that it can tell whether a RECLAIM_COMPLETE
has been issued for each client since then.
Since this is all optional info, we pass it along in environment
variables to the "init" and "create" upcalls. By doing this, we don't
need to revise the upcall format. The UMH upcall can simply make use of
this info if it happens to be present. If it's not then it can just
avoid lifting the grace period early.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Allow a privileged userland process to end the v4 grace period early.
Writing "Y", "y", or "1" to the file will cause the v4 grace period to
be lifted. The basic idea with this will be to allow the userland
client tracking program to lift the grace period once it knows that no
more clients will be reclaiming state.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
As stated in RFC 5661, section 18.51.3:
Once a RECLAIM_COMPLETE is done, there can be no further reclaim
operations for locks whose scope is defined as having completed
recovery. Once the client sends RECLAIM_COMPLETE, the server will
not allow the client to do subsequent reclaims of locking state for
that scope and, if these are attempted, will return
NFS4ERR_NO_GRACE.
Ensure that we enforce that requirement.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Currently, all of the grace period handling is part of lockd. Eventually
though we'd like to be able to build v4-only servers, at which point
we'll need to put all of this elsewhere.
Move the code itself into fs/nfs_common and have it build a grace.ko
module. Then, rejigger the Kconfig options so that both nfsd and lockd
enable it automatically.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
This fixes a failure in xfstests generic/313 because nfs doesn't update
mtime on a truncate. The protocol requires this to be done implicity
for a size changing setattr.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
v5: using nfs4_get_stateowner() instead of an inline function
v3: Update based on Jeff's comments
v2: Fix bad using of struct file_lock_operations for handle the owner
Acked-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
v5: same as the first version
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Empty files and missing xattrs do not guarantee that a file was
just created. This patch passes FILE_CREATED flag to IMA to
reliably identify new files.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> 3.14+
Commit 3b29970909 "nfsd4: enforce rd_dircount" totally misunderstood
rd_dircount; it refers to total non-attribute bytes returned, not number
of directory entries returned.
Bring the code into agreement with RFC 3530 section 14.2.24.
Cc: stable@vger.kernel.org
Fixes: 3b29970909 "nfsd4: enforce rd_dircount"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The working group appears committed to keeping the protocol stable, the
code has gotten some use and seems to work OK.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Recent NFS v4.2 drafts have removed NFS4ERR_METADATA_NOTSUPP and
reassigned the error code to NFS4ERR_UNION_NOTSUPP.
I also add in the NFS4ERR_OFFLOAD_NO_REQS error code.
We're not using any of these yet, so there's no harm done.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
locks_alloc_lock() has initialized struct file_lock, no need to
re-initialize it here.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
One of our customer's application only needs file names, not file
attributes. With directories having 10K+ inodes (assuming buffer cache
has directory blocks cached having file names, but inode cache is
limited and hence need eviction of older cached inodes), older inodes
are evicted periodically. So if they keep on doing readdir(2) from NSF
client on multiple directories, some directory's files are periodically
removed from inode cache and hence new readdir(2) on same directory
requires disk access to bring back inodes again to inode cache.
As READDIRPLUS request fetches attributes also, doing getattr on each
file on server, it causes unnecessary disk accesses. If READDIRPLUS on
NFS client is returned with -ENOTSUPP, NFS client uses READDIR request
which just gets the names of the files in a directory, not attributes,
hence avoiding disk accesses on server.
There's already a corresponding client-side mount option, but an export
option reduces the need for configuration across multiple clients.
This flag affects NFSv3 only. If it turns out it's needed for NFSv4 as
well then we may have to figure out how to extend the behavior to NFSv4,
but it's not currently obvious how to do that.
Signed-off-by: Rajesh Ghanekar <rajesh_ghanekar@symantec.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
As of 8c7424cff6 "nfsd4: don't try to encode conflicting owner if low
on space", we permit the server to process a LOCK operation even if
there might not be space to return the conflicting lockowner, because
we've made returning the conflicting lockowner optional.
However, the rpc server still wants to know the most we might possibly
return, so we need to take into account the possible conflicting
lockowner in the svc_reserve_space() call here.
Symptoms were log messages like "RPC request reserved 88 but used 108".
Fixes: 8c7424cff6 "nfsd4: don't try to encode conflicting owner if low on space"
Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When creating a file that already exists in a read-only directory with
O_EXCL, the NFSv3 server returns EACCES rather than EEXIST (which local
files and the NFSv4 server return). Fix this by checking the MAY_CREATE
permission only if the file does not exist. Since this already happens
in do_nfsd_create, the check in nfsd3_proc_create can simply be removed.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, we hold the state_lock when releasing the lease. That's
potentially problematic in the future if we allow for setlease methods
that can sleep. Move the nfs4_put_deleg_lease call out of the delegation
unhashing routine (which was always a bit goofy anyway), and into the
unlocked sections of the callers of unhash_delegation_locked.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently these fields are protected with the state_lock, but that
doesn't really make a lot of sense. These fields are "private" to the
nfs4_file, and can be protected with the more granular fi_lock.
The fi_lock is already held when setting these fields. Make the code
hold the fp->fi_lock when clearing the lease-related fields in the
nfs4_file, and no longer require that the state_lock be held when
calling into this function.
To prevent lock inversion with the i_lock, we also move the vfs_setlease
and fput calls outside of the fi_lock. This also sets us up for allowing
vfs_setlease calls to block in the future.
Finally, remove a redundant NULL pointer check. unhash_delegation_locked
locks the fp->fi_lock prior to that check, so fp in that function must
never be NULL.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We would normally expect the xid and the checksum to be the best
discriminators. Check them before looking at the procedure number,
etc.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...so we can remove the spinlocking around it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that the lru list is per-bucket, we don't need a second list for
searches.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull nfsd updates from Bruce Fields:
"This includes a major rewrite of the NFSv4 state code, which has
always depended on a single mutex. As an example, open creates are no
longer serialized, fixing a performance regression on NFSv3->NFSv4
upgrades. Thanks to Jeff, Trond, and Benny, and to Christoph for
review.
Also some RDMA fixes from Chuck Lever and Steve Wise, and
miscellaneous fixes from Kinglong Mee and others"
* 'for-3.17' of git://linux-nfs.org/~bfields/linux: (167 commits)
svcrdma: remove rdma_create_qp() failure recovery logic
nfsd: add some comments to the nfsd4 object definitions
nfsd: remove the client_mutex and the nfs4_lock/unlock_state wrappers
nfsd: remove nfs4_lock_state: nfs4_state_shutdown_net
nfsd: remove nfs4_lock_state: nfs4_laundromat
nfsd: Remove nfs4_lock_state(): reclaim_complete()
nfsd: Remove nfs4_lock_state(): setclientid, setclientid_confirm, renew
nfsd: Remove nfs4_lock_state(): exchange_id, create/destroy_session()
nfsd: Remove nfs4_lock_state(): nfsd4_open and nfsd4_open_confirm
nfsd: Remove nfs4_lock_state(): nfsd4_delegreturn()
nfsd: Remove nfs4_lock_state(): nfsd4_open_downgrade + nfsd4_close
nfsd: Remove nfs4_lock_state(): nfsd4_lock/locku/lockt()
nfsd: Remove nfs4_lock_state(): nfsd4_release_lockowner
nfsd: Remove nfs4_lock_state(): nfsd4_test_stateid/nfsd4_free_stateid
nfsd: Remove nfs4_lock_state(): nfs4_preprocess_stateid_op()
nfsd: remove old fault injection infrastructure
nfsd: add more granular locking to *_delegations fault injectors
nfsd: add more granular locking to forget_openowners fault injector
nfsd: add more granular locking to forget_locks fault injector
nfsd: add a list_head arg to nfsd_foreach_client_lock
...
Add some comments that describe what each of these objects is, and how
they related to one another.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Also destroy_clientid and bind_conn_to_session.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove the old nfsd_for_n_state function and move nfsd_find_client
higher up into the file to get rid of forward declaration. Remove
the struct nfsd_fault_inject_op arguments from the operations as
they are no longer needed by any of them.
Finally, remove the old "standard" get and set routines, which
also eliminates the client_mutex from this code.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...instead of relying on the client_mutex.
Also, fix up the printk output that is generated when the file is read.
It currently says that it's reporting the number of open files, but
it's actually reporting the number of openowners.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In a later patch, we'll want to collect the locks onto a list for later
destruction. If "func" is defined and "collect" is defined, then we'll
add the lock stateid to the list.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...which uses the client_lock for protection instead of client_mutex.
Also remove nfsd_forget_client as there are no more callers.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...that relies on the client_lock instead of client_mutex.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a new "get" routine for forget_clients that relies on the
client_lock instead of the client_mutex.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that we've added more granular locking in other places, it's time
to address the fault injection code. This code is currently quite
reliant on the client_mutex for protection. Start to change this by
adding a new set of fault injection op vectors.
For now they all use the legacy ones. In later patches we'll add new
routines that can deal with more granular locking.
Also, move some of the printk routines into the callers to make the
results of the operations more uniform.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The clid counter is a global counter currently. Move it to be a per-net
property so that it can be properly protected by the nn->client_lock
instead of relying on the client_mutex.
The verifier generator is also potentially racy if there are two
simultaneous callers. Generate the verifier when we generate the clid
value, so it's also created under the client_lock. With this, there's
no need to keep two counters as they'd always be in sync anyway, so
just use the clientid_counter for both.
As Trond points out, what would be best is to eventually move this
code to use IDR instead of the hash tables. That would also help ensure
uniqueness, but that's probably best done as a separate project.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's possible that we'll have an in-progress call on some of the clients
while a rogue EXCHANGE_ID or DESTROY_CLIENTID call comes in. Be sure to
try and mark the client expired first, so that the refcount is
respected.
This will only be a problem once the client_mutex is removed.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If it fails, it means that the client is in use and so destroying it
would be bad. Currently, the client_mutex prevents this from happening
but once we remove it, we won't be able to do this.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
All the callers except for the fault injection code call it directly
afterward, and in the fault injection case it won't hurt to do so
anyway.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, it's protected by the client_mutex. Move it so that the list
and the fields in the openowner are protected by the client_lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that the client lookup is done safely under the client_lock, so
we're not relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...instead of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In particular, we want to ensure that the move_to_confirmed() is
protected by the nn->client_lock spin lock, so that we can use that when
looking up the clientid etc. instead of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...instead of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For efficiency reasons, and because we want to use spin locks instead
of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The struct nfs_client is supposed to be invisible and unreferenced
before it gets here.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If we leave the client on the confirmed/unconfirmed tables, and leave
the sessions visible on the sessionid_hashtbl, then someone might
find them before we've had a chance to destroy them.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When we remove the client_mutex protection, we will need to ensure
that it can't be found by other threads while we're destroying it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A memory allocation failure could cause nfsd_startup_generic to fail, in
which case nfsd_users wouldn't be incorrectly left elevated.
After nfsd restarts nfsd_startup_generic will then succeed without doing
anything--the first consequence is likely nfs4_start_net finding a bad
laundry_wq and crashing.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes: 4539f14981 "nfsd: replace boolean nfsd_up flag by users counter"
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...to better match other functions that deal with open/lock stateids.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When we remove the client_mutex, we'll have a potential race between
FREE_STATEID and CLOSE.
The root of the problem is that we are walking the st_locks list,
dropping the spinlock and then trying to release the persistent
reference to the lockstateid. In between, a FREE_STATEID call can come
along and take the lock, find the stateid and then try to put the
reference. That leads to a double put.
Fix this by not releasing the cl_lock in order to release each lock
stateid. Use put_generic_stateid_locked to unhash them and gather them
onto a list, and free_ol_stateid_reaplist to free any that end up on the
list.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Releasing an openowner is a bit inefficient as it can potentially thrash
the cl_lock if you have a lot of stateids attached to it. Once we remove
the client_mutex, it'll also potentially be dangerous to do this.
Add some functions to make it easier to defer the part of putting a
generic stateid reference that needs to be done outside the cl_lock while
doing the parts that must be done while holding it under a single lock.
First we unhash each open stateid. Then we call
put_generic_stateid_locked which will put the reference to an
nfs4_ol_stateid. If it turns out to be the last reference, it'll go
ahead and remove the stid from the IDR tree and put it onto the reaplist
using the st_locks list_head.
Then, after dropping the lock we'll call free_ol_stateid_reaplist to
walk the list of stateids that are fully unhashed and ready to be freed,
and free each of them. This function can sleep, so it must be done
outside any spinlocks.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove the client_mutex, it'll be possible for the sc_type of a
lock stateid to change after it's found and checked, but before we can
go to destroy it. If that happens, we can end up putting the persistent
reference to the stateid more than once, and unhash it more than once.
Fix this by unhashing the lock stateid prior to dropping the cl_lock but
after finding it.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Reduce the cl_lock trashing in destroy_lockowner. Unhash all of the
lockstateids on the lockowner's list. Put the reference under the lock
and see if it was the last one. If so, then add it to a private list
to be destroyed after we drop the lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove the client_mutex, we'll need to properly protect
the stateowner reference counts using the cl_lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Do more within the main loop, and simplify the function a bit. Also,
there's no need to take a stateowner reference unless we're going to call
release_lockowner.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Preparation for removing the client_mutex.
Convert the open owner hash table into a per-client table and protect it
using the nfs4_client->cl_lock spin lock.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove client mutex protection, we'll need to ensure that
stateowner lookup and creation are atomic between concurrent compounds.
Ensure that alloc_init_lock_stateowner checks the hashtable under the
client_lock before adding a new element.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove client mutex protection, we'll need to ensure that
stateowner lookup and creation are atomic between concurrent compounds.
Ensure that alloc_init_open_stateowner checks the hashtable under the
client_lock before adding a new element.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove client_mutex protection, it'll be possible to have an
in-flight operation using an openstateid when a CLOSE call comes in.
If that happens, we can't just put the sc_file reference and clear its
pointer without risking an oops.
Fix this by ensuring that v4.0 CLOSE operations wait for the refcount
to drop before proceeding to do so.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Change it so that only openstateids hold persistent references to
openowners. References can still be held by compounds in progress.
With this, we can get rid of NFS4_OO_NEW. It's possible that we
will create a new openowner in the process of doing the open, but
something later fails. In the meantime, another task could find
that openowner and start using it on a successful open. If that
occurs we don't necessarily want to tear it down, just put the
reference that the failing compound holds.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that lockowner references are only held by lockstateids and
operations that are in-progress. With this, we can get rid of
release_lockowner_if_empty, which will be racy once we remove
client_mutex protection.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A necessary step toward client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow stateowners to be unhashed and destroyed when the last reference
is put. The unhashing must be idempotent. In a future patch, we'll add
some locking around it, but for now it's only protected by the
client_mutex.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that when finding or creating a lockowner, that we get a
reference to it. For now, we also take an extra reference when a
lockowner is created that can be put when release_lockowner is called,
but we'll remove that in a later patch once we change how references are
held.
Since we no longer destroy lockowners in the event of an error in
nfsd4_lock, we must change how the seqid gets bumped in the lk_is_new
case. Instead of doing so on creation, do it manually in nfsd4_lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't want to rely on the client_mutex for protection in the case of
NFSv4 open owners. Instead, we add a mutex that will only be taken for
NFSv4.0 state mutating operations, and that will be released once the
entire compound is done.
Also, ensure that nfsd4_cstate_assign_replay/nfsd4_cstate_clear_replay
take a reference to the stateowner when they are using it for NFSv4.0
open and lock replay caching.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The way stateowners are managed today is somewhat awkward. They need to
be explicitly destroyed, even though the stateids reference them. This
will be particularly problematic when we remove the client_mutex.
We may create a new stateowner and attempt to open a file or set a lock,
and have that fail. In the meantime, another RPC may come in that uses
that same stateowner and succeed. We can't have the first task tearing
down the stateowner in that situation.
To fix this, we need to change how stateowners are tracked altogether.
Refcount them and only destroy them once all stateids that reference
them have been destroyed. This patch starts by adding the refcounting
necessary to do that.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow nfs4_find_stateid_by_type to take the stateid reference, while
still holding the &cl->cl_lock. Necessary step toward client_mutex
removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow nfs4_lookup_stateid to take the stateid reference, instead
of having all the callers do so.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow nfs4_preprocess_seqid_op to take the stateid reference, instead
of having all the callers do so.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that all the callers put the open stateid after use.
Necessary step toward client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfsd4_open_confirm() keeps a reference to the open
stateid until it is done working with it.
Necessary step toward client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Prepare nfsd4_close for a future where nfs4_preprocess_seqid_op()
hands it a fully referenced open stateid. Necessary step toward
client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfsd4_process_open2() keeps a reference to the open
stateid until it is done working with it. Necessary step toward
client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfsd4_process_open2() keeps a reference to the delegation
stateid until it is done working with it. Necessary step toward
client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfs4_open_delegation() keeps a reference to the delegation
stateid until it is done working with it. Necessary step toward
client_mutex removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfsd4_locku() keeps a reference to the lock stateid
until it is done working with it. Necessary step toward client_mutex
removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that nfsd4_lock() references the lock stateid while it is
manipulating it. Not currently necessary, but will be once the
client_mutex is removed.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Hold the cl_lock over the bulk of these functions. In addition to
ensuring that they aren't freed prematurely, this will also help prevent
a potential race that could be introduced later. Once we remove the
client_mutex, it'll be possible for FREE_STATEID and CLOSE to race and
for both to try to put the "persistent" reference to the stateid.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Preparation for removal of the client_mutex.
Currently, no lock aside from the client_mutex is held when calling
find_lock_state. Ensure that the cl_lock is held by adding a lockdep
assertion.
Once we remove the client_mutex, it'll be possible for another thread to
race in and insert a lock state for the same file after we search but
before we insert a new one. Ensure that doesn't happen by redoing the
search after allocating a new stid that we plan to insert. If one is
found just put the one that was allocated.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Change to using the clp->cl_lock for this. For now, there's a lot of
cl_lock thrashing, but in later patches we'll eliminate that and close
the potential races that can occur when releasing the cl_lock while
walking the lists. For now, the client_mutex prevents those races.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Releasing locks when we unhash the stateid instead of doing so only when
the stateid is actually released will be problematic in later patches
when we need to protect the unhashing with spinlocks. Move it into the
sc_free operation instead.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, this is serialized by the client_mutex, which is slated for
removal. Add finer-grained locking here. Also, do some cleanup around
find_stateid to prepare for taking references.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
All stateids are associated with a nfs4_file. Let's consolidate.
Replace delegation->dl_file with the dl_stid.sc_file, and
nfs4_ol_stateid->st_file with st_stid.sc_file.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When we remove the client_mutex, we'll need to be able to ensure that
these objects aren't destroyed while we're not holding locks.
Add a ->free() callback to the struct nfs4_stid, so that we can
release a reference to the stid without caring about the contents.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's possible for nfsd to fail opening a file that it has just created.
When that happens, we throw a WARN but it doesn't include any info about
the error code. Print the status code to give us a bit more info.
Our QA group hit some of these warnings under some very heavy stress
testing. My suspicion is that they hit the file-max limit, but it's hard
to know for sure. Go ahead and add a -ENFILE mapping to
nfserr_serverfault to make the error more distinct (and correct).
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that the nfs4_file has a filehandle in it, we no longer need to
keep a per-delegation copy of it. Switch to using the one in the
nfs4_file instead.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The state lock can be fairly heavily contended, and there's no reason
that nfs4_file lookups and delegation_blocked should be mutually
exclusive. Let's give the new block_delegation code its own spinlock.
It does mean that we'll need to take a different lock in the delegation
break code, but that's not generally as critical to performance.
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the alloc_init_deleg call into nfs4_set_delegation and change the
function to return a pointer to the delegation or an IS_ERR return. This
allows us to skip allocating a delegation if the file has already
experienced a lease conflict.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need to pass in a net pointer since we can derive that.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We want to convert to an atomic type so that we don't need to lock
across the call to alloc_init_deleg(). Then convert to a long type so
that we match the size of 'max_delegations'.
None of this is a problem today, but it will be once we remove
client_mutex protection.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, both destroy_revoked_delegation and revoke_delegation
manipulate the cl_revoked list without any locking aside from the
client_mutex. Ensure that the clp->cl_lock is held when manipulating it,
except for the list walking in destroy_client. At that point, the client
should no longer be in use, and so it should be safe to walk the list
without any locking. That also means that we don't need to do the
list_splice_init there either.
Also, the fact that revoke_delegation deletes dl_recall_lru list_head
without any locking makes it difficult to know whether it's doing so
safely in all cases. Move the list_del_init calls into the callers, and
add a WARN_ON in the event that t's passed a delegation that has a
non-empty list_head.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that the delegations cannot be found by the laundromat etc once
we add them to the various 'revoke' lists.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Andrew Elble