Commit Graph

7 Commits

Author SHA1 Message Date
Mugunthan V N 0731cbdd5f ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt binding docs
As per mmc device tree binding documentation card detect gpio has
to be active low signal. When a hardware is designed with active
high card detect, gpio polarity has to be changed with
cd-inverted dt property.

In AM43xx the card detect gpio is designed as active low gpio.
So correcting the dt card detect gpio definition.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-10-12 16:49:04 -07:00
Keerthy fff51e771e ARM: dts: AM437x: Add the internal and external clock nodes for rtc
rtc can either be supplied from internal 32k clock or external crystal
generated 32k clock. Internal clock is SOC specific and the external
clock is board dependent. Adding the corresponding nodes.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:20 +02:00
Felipe Balbi 49d094570c ARM: dts: am437x-idk: enable i2c2
i2c2 goes to an expansion connector which we
want to use.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 14:07:16 -07:00
Felipe Balbi ee5d9cd2b3 ARM: dts: am437x-idk: fix sleep pinctrl state
we have i2c0 sleep pinctrl state but were passing
default state anyhow. Fix that.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 10:35:43 -08:00
Felipe Balbi 1236044825 ARM: dts: am437x-idk: fix TPS62362 i2c bus
As it turns out, tps62362 is actually on I2C bus0,
not bus1. This has gone unnoticed because Linux
doesn't use (as of now) that regulator at all, it's
setup by the bootloader and left as is.

While at that, also add missing reg property for
our regulator.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-24 10:35:43 -08:00
Felipe Balbi cd5bca6f62 ARM: dts: am437x-idk: add gpio-based power key
AM437x IDK board has a User Switch which we can
program to whatever we want. Because this board
doesn't have a PMIC which can give us power button
presses, let's use this user switch as a gpio-keys
power button.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-07 16:25:10 -08:00
Felipe Balbi 47e0920cca ARM: dts: add support for AM437x IDK
The AM437x Industrial Development Kit (IDK) is
an application development platform targeted at
industrial communication and control applications.

It comes with a 3-phase motor driver, PROFINET,
PROFIBUS and a few other industrial communication
interfaces.

The board has 1GiB of DDR3 RAM, QSPI NOR flash,
a 100% discrete power design (no PMIC) and an
on-board 2MP camera (not supported with Linux
as of this writing).

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-07 16:23:52 -08:00