Commit Graph

534 Commits

Author SHA1 Message Date
Dmitry Torokhov 3e8040b0a9 Input: at32psif - convert to dev_pm_ops
Convert driver to use dev_pm_ops instead of legacy PM infrastructure.
Also make 'open' a bool since it is really a boolean.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-23 00:02:23 -08:00
Tony Lindgren 967809bd7f Merge branch 'omap1-part2' into omap1
Conflicts:
	drivers/leds/leds-ams-delta.c
2012-01-20 05:31:52 -08:00
Rusty Russell 90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Linus Torvalds 2485a4b610 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: bcm5974 - set BUTTONPAD property
  Input: serio_raw - return proper result when serio_raw_write fails
  Input: serio_raw - really signal HUP upon disconnect
  Input: serio_raw - remove stray semicolon
  Input: revert some over-zealous conversions to module_platform_driver()
2012-01-12 12:40:41 -08:00
Dmitry Torokhov 4fa0771138 Input: serio_raw - return proper result when serio_raw_write fails
If serio_raw_write was always returning number of bytes successfully
sent to serio port and never signalled error condition to the caller.
Change it so that for completely failed transfers appropriate error
code returned to the caller (partially successful writes still return
number of bytes transferred).

Reported-by: Che-liang Chiou <clchiou@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-10 23:13:57 -08:00
Dmitry Torokhov 0c62fbf600 Input: serio_raw - really signal HUP upon disconnect
Commit 8c1c10d570 attempted to signal
POLLHUP | POLLERR condition when polling disconnected device,
unfortunately it did not do it quite correctly.

Reported-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-10 23:13:21 -08:00
Che-Liang Chiou d89c9bcb33 Input: serio_raw - remove stray semicolon
Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-10 23:13:00 -08:00
Dmitry Torokhov d3d25808df Input: revert some over-zealous conversions to module_platform_driver()
Recent conversion to module_platform_driver() went a bit too far and
converted not only drivers that used platform_driver_register() but
also ones using platform_driver_probe(), breaking them in process.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-10 23:12:46 -08:00
Linus Torvalds 4690dfa8cd Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Wire-up new system calls
  microblaze: Remove NO_IRQ from architecture
  input: xilinx_ps2: Don't use NO_IRQ
  block: xsysace: Don't use NO_IRQ
  microblaze: Trivial asm fix
  microblaze: Fix debug message in module
  microblaze: Remove eprintk macro
  microblaze: Send CR before LF for early console
  microblaze: Change NO_IRQ to 0
  microblaze: Use irq_of_parse_and_map for timer
  microblaze: intc: Change variable name
  microblaze: Use of_find_compatible_node for timer and intc
  microblaze: Add __cmpdi2
  microblaze: Synchronize __pa __va macros
2012-01-10 17:37:49 -08:00
Linus Torvalds dbe950f201 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits)
  Input: tc3589x-keypad - add missing kerneldoc
  Input: ucb1400-ts - switch to using dev_xxx() for diagnostic messages
  Input: ucb1400_ts - convert to threaded IRQ
  Input: ucb1400_ts - drop inline annotations
  Input: usb1400_ts - add __devinit/__devexit section annotations
  Input: ucb1400_ts - set driver owner
  Input: ucb1400_ts - convert to use dev_pm_ops
  Input: psmouse - make sure we do not use stale methods
  Input: evdev - do not block waiting for an event if fd is nonblock
  Input: evdev - if no events and non-block, return EAGAIN not 0
  Input: evdev - only allow reading events if a full packet is present
  Input: add driver for pixcir i2c touchscreens
  Input: samsung-keypad - implement runtime power management support
  Input: tegra-kbc - report wakeup key for some platforms
  Input: tegra-kbc - add device tree bindings
  Input: add driver for AUO In-Cell touchscreens using pixcir ICs
  Input: mpu3050 - configure the sampling method
  Input: mpu3050 - ensure we enable interrupts
  Input: mpu3050 - add of_match table for device-tree probing
  Input: sentelic - document the latest hardware
  ...

Fix up fairly trivial conflicts (device tree matching conflicting with
some independent cleanups) in drivers/input/keyboard/samsung-keypad.c
2012-01-10 10:55:52 -08:00
Linus Torvalds d3d0b02434 Merge branch 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
* 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  sound: aaci: Enable module alias autogeneration for AMBA drivers
  watchdog: sp805: Enable module alias autogeneration for AMBA drivers
  fbdev: amba: Enable module alias autogeneration for AMBA drivers
  serial: pl011: Enable module alias autogeneration for AMBA drivers
  serial: pl010: Enable module alias autogeneration for AMBA drivers
  spi: pl022: Enable module alias autogeneration for AMBA drivers
  rtc: pl031: Enable module alias autogeneration for AMBA drivers
  rtc: pl030: Enable module alias autogeneration for AMBA drivers
  mmc: mmci: Enable module alias autogeneration for AMBA drivers
  input: ambakmi: Enable module alias autogeneration for AMBA drivers
  gpio: pl061: Enable module alias autogeneration for AMBA drivers
  dmaengine: pl330: Enable module alias autogeneration for AMBA drivers
  dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers
  hwrng: nomadik: Enable module alias autogeneration for AMBA drivers
  ARM: amba: Auto-generate AMBA driver module aliases during modpost
  ARM: amba: Move definition of struct amba_id to mod_devicetable.h
2012-01-06 18:03:30 -08:00
Michal Simek be3bad6f5e input: xilinx_ps2: Don't use NO_IRQ
Drivers shouldn't use NO_IRQ. Microblaze and PPC
define NO_IRQ as 0 and this reference will be removed
in near future.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Reviewed-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
CC: Rob Herring <rob.herring@calxeda.com>
2012-01-05 08:34:30 +01:00
Janusz Krzysztofik 8d09a1bb31 input: serio: ams-delta: toggle keyboard power over GPIO
Don't use Amstrad Delta custom I/O functions once GPIO interface is
available for the underlying hardware.

While requesting and initializing GPIO pins used, also take care of one
extra pin KEYBRD_DATAOUT which, even if not used by the driver, belongs
to the device and affects its functioning.

Once done, move the driver initialization back to the device_initcall
level, reverting the temporary chane introduced with patch 1/7 "ARM:
OMAP1: ams-delta: register latch dependent devices later".  That change
is no longer required once the driver takes care of registering used
GPIO pins, and it's better to initialize the device before others using
the latch2 based GPIO pins, otherwise a garbage is reported on boot,
perhaps due to random data already captured by the FIQ handler while the
keyboard related latch bits are written with random values during
initialization of those other latch2 dependent devices.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
[tony@atomide.com: renamed _gpios to ams_delta_gpios]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-22 09:00:46 -08:00
Janusz Krzysztofik f7519d8c82 ARM: OMAP1: ams-delta: register latch dependent devices later
In preparation to converting Amstrad Delta on-board latches to
basic_mmio_gpio devices, registration of platform devices which depend
on latches and will require initialization of their GPIO pins first,
should be moved out of .machine_init down to late_initcall level, as the
gpio-generic driver is not available until device_initcall time.  The
latch reset operation, which will be replaced with GPIO initialization,
must also be moved to late_initcall for the same reason.

Since there was already another, separate arch_initcall function for
setting up one of those latch dependent devices, the on-board modem
device, reuse that function, i.e., rename it to a name that matches the
new purpose, extend with other device setup relocated from
.machine_init, and move down to the late_initcall level.

While being at it, add missing gpio_free() in case the modem platform
device registration fails.

Thanks to Tony Lindgren <tony@atomide.com> who suggested this approach
instead of shifting up the gpio-generic driver initialization.

In addition, defer registration of the Amstrad Delta ASoC and serio
devices, done from their device driver files, until late_initcall time,
as those drivers will depend on their GPIO pins already requested from
the board late_init() function until updated to register their GPIO pins
themselves.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-21 10:47:01 -08:00
JJ Ding 24d2469a33 Input: serio - use macro module_platform_driver()
Commit 940ab88962 introduced a new macro to
save some platform_driver boilerplate code. Use it.

Signed-off-by: JJ Ding <dgdunix@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-30 23:41:43 -08:00
Dmitry Torokhov 0d2cd91bf7 Merge commit 'v3.2-rc3' into next 2011-11-29 01:51:07 -08:00
Dave Martin 2dfff23591 input: ambakmi: Enable module alias autogeneration for AMBA drivers
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-22 10:58:31 +00:00
Aaro Koskinen 77f6ca5a62 Input: ams_delta_serio - include linux/module.h
Fix the following compilation failure with v3.2-rc1 by including module.h:

  CC      drivers/input/serio/ams_delta_serio.o
drivers/input/serio/ams_delta_serio.c:33:15: error: expected declaration specifiers or '...' before string constant
drivers/input/serio/ams_delta_serio.c:34:20: error: expected declaration specifiers or '...' before string constant
drivers/input/serio/ams_delta_serio.c:35:16: error: expected declaration specifiers or '...' before string constant
drivers/input/serio/ams_delta_serio.c: In function 'ams_delta_serio_init':
drivers/input/serio/ams_delta_serio.c:155:2: error: 'THIS_MODULE' undeclared (first use in this function)
drivers/input/serio/ams_delta_serio.c:155:2: note: each undeclared identifier is reported only once for each function it appears in

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-09 21:19:54 -08:00
Tomas Miljenović b42c909743 Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklists
Touchpad input doesn't work with newer HP Pavilion dv4 laptops due to bad i8042
timeout data.  Booting with i8042.notimeout and i8042.nomux successfully works
around the problem.

This patch adds the devices to the i8042 notimeout and nomux blacklists.

Signed-off-by: Tomas Miljenovic <TomasM@tomasm.tk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-05 00:03:21 -07:00
Dmitry Torokhov 1729ad1f4f Input: i8042 - also perform controller reset when suspending
In addition to some laptops needing i8042 reset after resuming from S2R to
get their touchpads working there is another class of laptops - ones that
need i8042 reset before going to S2R, otherwise they will simply reboot
instead of resuming.

See https://bugzilla.kernel.org/show_bug.cgi?id=15612

This change forces reset of i8042 before doing S2R.

Reported-by: Stefan Koch <stefan_koch@gmx.net>
Tested-by: Alexander van Loon <a.vanloon@alexandervanloon.nl>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-05 00:01:56 -07:00
Dmitry Torokhov 550eca7caf Input: serio_raw - fix memory leak when closing char device
Apparently we never freed memory allocated when users open our char
devices nor removed old users from the list of connected clients.

Also unregister misc device immediately upon disconnecting the port
instead of waiting until last user drops off (refcounting in misc
device code will make sure needed pieces stay around while they
are needed) and make sure we are not holing holding serio_raw_mutex
when registering/unregistering misc device. This should fix potential
deadlock between serio_raw and misc device code uncovered by lockdep
and reported by Thomas Tuttle.

Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:35:23 -07:00
Dmitry Torokhov 8c1c10d570 Input: serio_raw - kick clients when disconnecting port
Send SIGIO/POLL_HUP and otherwise wake up waiters when corresponding serio
port is being disconnected. Also check if port is dead in serio_raw_poll
and signal POLLHUP|POLLERR.

This should speed up process of releasing dead devices by userspace
applications.

Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:35:18 -07:00
Dmitry Torokhov 85f5b35da8 Input: serio_raw - explicitly mark disconnected ports as dead
Instead of relying on setting serio_raw->serio to NULL upon disconnecting
ports mark them explicitly as "dead". Also take and carry reference to
underlying serio port to make sure it does not go away until we are done
with it.

Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:35:13 -07:00
Dmitry Torokhov 15a564d8db Input: serio_raw - fix coding style issues
This makes checkpatch.pl happy with the driver

Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:35:10 -07:00
Dmitry Torokhov 8d92847700 Input: serio_raw - use dev_*() for messages
This will ensure our reporting is consistent with the rest of the system.

Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:35:05 -07:00
Dmitry Torokhov 8c31eb01e1 Input: serio_raw - use bool for boolean data
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:35:00 -07:00
Dmitry Torokhov 843e784afe Input: serio_raw - perform proper locking when adding clients to list
Make sure we hold serio lock when adding clients to client list so that
we do not race with serio_raw_release() removing clients from the same
list.

Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:34:55 -07:00
Dmitry Torokhov 7c5bbb2eb7 Input: serio_raw - rename serio_raw_list to serio_raw_client
'serio_raw_list' and 'list' names do not accurately represent their objects
and are extremely confusing when reading the code. Let's use better suited
names.

Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:34:52 -07:00
Dmitry Torokhov ba538cd2a8 Input: serio_raw - use kref instead of rolling out its own refcounting
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:34:47 -07:00
Michal Simek 5f9288af06 input: xilinx_ps2: Add missing of_address.h header
Add missing header.

Error log:
CC      drivers/input/serio/xilinx_ps2.o
drivers/input/serio/xilinx_ps2.c: In function 'xps2_of_probe':
drivers/input/serio/xilinx_ps2.c:249: error: implicit declaration of function 'of_address_to_resource'

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-08-01 17:07:21 +01:00
Linus Torvalds 70a3eff576 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits)
  Input: synaptics - fix reporting of min coordinates
  Input: tegra-kbc - enable key autorepeat
  Input: kxtj9 - fix locking typo in kxtj9_set_poll()
  Input: kxtj9 - fix bug in probe()
  Input: intel-mid-touch - remove pointless checking for variable 'found'
  Input: hp_sdc - staticize hp_sdc_kicker()
  Input: pmic8xxx-keypad - fix a leak of the IRQ during init failure
  Input: cy8ctmg110_ts - set reset_pin and irq_pin from platform data
  Input: cy8ctmg110_ts - constify i2c_device_id table
  Input: cy8ctmg110_ts - fix checking return value of i2c_master_send
  Input: lifebook - make dmi callback functions return 1
  Input: atkbd - make dmi callback functions return 1
  Input: gpio_keys - switch to using SIMPLE_DEV_PM_OPS
  Input: gpio_keys - add support for device-tree platform data
  Input: aiptek - remove double define
  Input: synaptics - set minimum coordinates as reported by firmware
  Input: synaptics - process button bits in AGM packets
  Input: synaptics - rename set_slot to be more descriptive
  Input: synaptics - fuzz position for touchpad with reduced filtering
  Input: synaptics - set resolution for MT_POSITION_X/Y axes
  ...
2011-07-27 09:24:56 -07:00
Axel Lin dc3e8247eb Input: hp_sdc - staticize hp_sdc_kicker()
It's not referenced outside this file so there's no need for it to be in
the global name space.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-18 17:10:36 -07:00
Hans-Christian Egtvedt 7c40952295 Input: update author email for gpio_mouse, at32psif, and atmel-wm97xx
This patch updates the email address of the gpio_mouse, at32psif, and
atmel-wm97xx drivers supported by me to an email account I will use on a more
regular basis in the future.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-29 00:26:02 -07:00
Justin P. Mattock 83ae417b85 Input: libps2.c: fix comment typo arrrives.
Fix a typo in a comment.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-27 12:28:56 +02:00
Joe Perches 28f65c11f2 treewide: Convert uses of struct resource to resource_size(ptr)
Several fixes as well where the +1 was missing.

Done via coccinelle scripts like:

@@
struct resource *ptr;
@@

- ptr->end - ptr->start + 1
+ resource_size(ptr)

and some grep and typing.

Mostly uncompiled, no cross-compilers.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-10 14:55:36 +02:00
Linus Torvalds 55db4c64ed Revert "tty: make receive_buf() return the amout of bytes received"
This reverts commit b1c43f82c5.

It was broken in so many ways, and results in random odd pty issues.

It re-introduced the buggy schedule_work() in flush_to_ldisc() that can
cause endless work-loops (see commit a5660b41af6a: "tty: fix endless
work loop when the buffer fills up").

It also used an "unsigned int" return value fo the ->receive_buf()
function, but then made multiple functions return a negative error code,
and didn't actually check for the error in the caller.

And it didn't actually work at all.  BenH bisected down odd tty behavior
to it:
  "It looks like the patch is causing some major malfunctions of the X
   server for me, possibly related to PTYs.  For example, cat'ing a
   large file in a gnome terminal hangs the kernel for -minutes- in a
   loop of what looks like flush_to_ldisc/workqueue code, (some ftrace
   data in the quoted bits further down).

   ...

   Some more data: It -looks- like what happens is that the
   flush_to_ldisc work queue entry constantly re-queues itself (because
   the PTY is full ?) and the workqueue thread will basically loop
   forver calling it without ever scheduling, thus starving the consumer
   process that could have emptied the PTY."

which is pretty much exactly the problem we fixed in a5660b41af.

Milton Miller pointed out the 'unsigned int' issue.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-by: Milton Miller <miltonm@bga.com>
Cc: Stefan Bigler <stefan.bigler@keymile.com>
Cc: Toby Gray <toby.gray@realvnc.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-04 06:33:24 +09:00
Felipe Balbi b1c43f82c5 tty: make receive_buf() return the amout of bytes received
it makes it simpler to keep track of the amount of
bytes received and simplifies how flush_to_ldisc counts
the remaining bytes. It also fixes a bug of lost bytes
on n_tty when flushing too many bytes via the USB
serial gadget driver.

Tested-by: Stefan Bigler <stefan.bigler@keymile.com>
Tested-by: Toby Gray <toby.gray@realvnc.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-22 17:31:53 -07:00
Linus Torvalds 42933bac11 Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
  Fix common misspellings
2011-04-07 11:14:49 -07:00
Linus Torvalds 899631c791 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: rpckbd - fix a leak of the IRQ during init failure
  Input: wacom - add support for Lenovo tablet ID (0xE6)
  Input: i8042 - downgrade selftest error message to dbg()
  Input: synaptics - fix crash in synaptics_module_init()
  Input: spear-keyboard - fix inverted condition in interrupt handler
  Input: uinput - allow for 0/0 min/max on absolute axes.
  Input: sparse-keymap - report KEY_UNKNOWN for unknown scan codes
  Input: sparse-keymap - report scancodes with key events
  Input: h3600_ts_input - fix a spelling error
  Input: wacom - report resolution for pen devices
  Input: wacom - constify wacom_features for a new missed Bamboo models
2011-04-05 12:35:29 -07:00
Axel Lin e28e1d93e9 Input: rpckbd - fix a leak of the IRQ during init failure
In rpckbd_open prror path, free_irq() was using NULL rather than the
driver data as the data pointer so free_irq() wouldn't have matched.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-02 21:47:53 -07:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Paul Bolle a2a94e7323 Input: i8042 - downgrade selftest error message to dbg()
On a "really fragile" laptop I noticed a single
    i8042.c: i8042 controller selftest failed. (0x1 != 0x55)

error in the log. But there's no reason to print this message at
KERN_ERR level each time that loop fails, especially since the message
telling about the overall selftest failure is printed at KERN_INFO level
(on X86).

Add an actual error message for non-X86 systems, where a selftest
failure is (apparently) more serious. Remove a space in an another error
message.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-31 00:12:40 -07:00
Thomas Gleixner dced35aeb0 drivers: Final irq namespace conversion
Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:19 +02:00
Dmitry Torokhov 97eb3f2435 Merge branch 'next' into for-linus 2011-03-18 23:38:50 -07:00
Linus Torvalds 6d7ed21d17 Merge branches 'defcfg', 'drivers' and 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'defcfg' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6647/1: add Versatile Express defconfig
  ARM: 6644/1: mach-ux500: update the U8500 defconfig

* 'drivers' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6764/1: pl011: factor out FIFO to TTY code
  ARM: 6763/1: pl011: add optional RX DMA to PL011 v2
  ARM: 6758/1: amba: support pm ops
  ARM: amba: make amba_driver id_table const
  ARM: amba: make internal ID table handling const
  ARM: amba: make probe() functions take const id tables
  ARM: 6662/1: amba: make amba_bustype non-static
  ARM: mmci: add dmaengine-based DMA support
  ARM: mmci: no need for separate host->data_xfered
  ARM: mmci: avoid unnecessary switch to data available PIO interrupts
  ARM: mmci: no need to call flush_dcache_page() with sg_miter API
  ARM: mmci: avoid reporting too many completed bytes on fifo overrun
  ALSA: AACI: make fifo variables more explanitory
  ALSA: AACI: no need to call snd_pcm_period_elapsed() for each period
  ALSA: AACI: use snd_pcm_lib_period_bytes()
  ALSA: AACI: clean up AACI announcement printk
  ALSA: AACI: fix channel mask selection
  ALSA: AACI: fix number of channels for record
  ALSA: AACI: fix multiple IRQ claiming

* 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm:
  VIDEO: cyberpro: remove unused cyber2000fb_get_fb_var()
  VIDEO: cyberpro: remove useless function extreg pointers
  VIDEO: cyberpro: update handling of device structures
  VIDEO: cyberpro: add support for video capture I2C
  VIDEO: cyberpro: make 'reg_b0_lock' always present
  VIDEO: cyberpro: add I2C support
  VIDEO: cyberpro: select lowest multipler/divisor for PLL
2011-03-17 18:48:35 -07:00
Linus Torvalds 7b7adc4a01 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32: (40 commits)
  unicore32: rewrite arch-specific tlb.h to use asm-generic version
  unicore32: modify io_p2v and io_v2p macros, and adjust PKUNITY_mmio_BASEs
  unicore32: replace unicore32-specific iomap functions with generic lib implementation
  unicore32 machine related: add frame buffer driver for pkunity-v3 soc
  unicore32 machine related files: add i2c bus drivers for pkunity-v3 soc
  unicore32 io: redefine __REG(x) and re-use readl/writel funcs
  unicore32 i8042 upgrade and bugfix: adjust resource request region type
  unicore32 upgrade to v2.6.38-rc5: add one more paramter for pte_alloc_map call
  unicore32 i8042: adjust io funcs of i8042-unicore32io.h
  unicore32: rename PKUNITY_IOSPACE_BASE to PKUNITY_MMIO_BASE
  unicore32: modify function names and parameters for irq_chips
  unicore32: remove unused lines in arch/unicore32/include/asm/irq.h
  unicore32 time.c: change calculate method for clock_event_device
  unicore32: ADD MAINTAINER for unicore32 architecture
  unicore32 machine related files: ps2 driver
  unicore32 machine related files: pci bus handling
  unicore32 machine related files: hardware registers
  unicore32 machine related files: core files
  unicore32 additional architecture files: boot process
  unicore32 additional architecture files: low-level lib: misc
  ...

Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-03-17 10:11:25 -07:00
Russell King 9c9585e0e9 Merge branches 'aaci', 'mmci-dma', 'pl' and 'pl011' into drivers 2011-03-17 11:04:51 +00:00
GuanXuetao e5abf78b57 unicore32 io: redefine __REG(x) and re-use readl/writel funcs
-- by advice of Arnd Bergmann

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-03-17 09:19:19 +08:00
GuanXuetao 4517366d87 unicore32 i8042 upgrade and bugfix: adjust resource request region type
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-03-17 09:19:19 +08:00
GuanXuetao 3838b82c0a unicore32 i8042: adjust io funcs of i8042-unicore32io.h
replace inb/outb with readb/writeb in i8042-unicore32io.h
and correct typecasting of register and region macros
  -- by advice with Arnd Bergmann

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-03-17 09:19:18 +08:00
GuanXuetao 425ad52b86 unicore32 machine related files: ps2 driver
This patch implements arch-specific ps2 driver.

By reviewed with Dmitry Torokhov:
     1. move i8042-ucio.h to drivers/input/serio/i8042-unicore32io.h
     2. move puv3_ps2_init() to arch/unicore32/kernel/puv3-core.c
     3. remove unused comments.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-17 09:19:15 +08:00
Linus Torvalds 4c5811bf46 Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits)
  tty: serial: altera_jtaguart: Add device tree support
  tty: serial: altera_uart: Add devicetree support
  dt: eliminate of_platform_driver shim code
  dt: Eliminate of_platform_{,un}register_driver
  dt/serial: Eliminate users of of_platform_{,un}register_driver
  dt/usb: Eliminate users of of_platform_{,un}register_driver
  dt/video: Eliminate users of of_platform_{,un}register_driver
  dt/net: Eliminate users of of_platform_{,un}register_driver
  dt/sound: Eliminate users of of_platform_{,un}register_driver
  dt/spi: Eliminate users of of_platform_{,un}register_driver
  dt: uartlite: merge platform and of_platform driver bindings
  dt: xilinx_hwicap: merge platform and of_platform driver bindings
  ipmi: convert OF driver to platform driver
  leds/leds-gpio: merge platform_driver with of_platform_driver
  dt/sparc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: move of_bus_type infrastructure to ibmebus
  drivercore/dt: add a match table pointer to struct device
  dt: Typo fix.
  altera_ps2: Add devicetree support
  ...
2011-03-16 17:28:10 -07:00
Grant Likely 1c48a5c93d dt: Eliminate of_platform_{,un}register_driver
Final step to eliminate of_platform_bus_type.  They're all just
platform drivers now.

v2: fix type in pasemi_nand.c (thanks to Stephen Rothwell)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-28 13:22:46 -07:00
Grant Likely 4ebb24f707 dt/sparc: Eliminate users of of_platform_{,un}register_driver
Get rid of old users of of_platform_driver in arch/sparc.  Most
of_platform_driver users can be converted to use the platform_bus
directly.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-28 01:36:39 -07:00
Grant Likely 38a5d6736e Merge commit 'v2.6.38-rc6' into devicetree/next
Conflicts:
	drivers/spi/pxa2xx_spi_pci.c
2011-02-28 01:36:21 -07:00
Linus Torvalds 57949e8006 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: serio/gameport - use 'long' system workqueue
  Input: synaptics - document 0x0c query
  Input: tegra-kbc - add function keymap
2011-02-23 14:44:25 -08:00
Dmitry Torokhov 1d64b655dc Input: serio/gameport - use 'long' system workqueue
Commit 8ee294cd9d converted serio
subsystem event handling from using a dedicated thread to using
common workqueue. Unfortunately, this regressed our boot times,
due to the fact that serio jobs take long time to execute. While
the new concurrency managed workqueue code manages long-playing
works just fine and schedules additional workers as needed, such
works wreck havoc among remaining users of flush_scheduled_work().

To solve this problem let's move serio/gameport works from system_wq
to system_long_wq which nobody tries to flush.

Reported-and-tested-by: Hernando Torque <pantherchen@versanet.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-23 08:53:07 -08:00
Russell King aa25afad2c ARM: amba: make probe() functions take const id tables
Make Primecell driver probe functions take a const pointer to their
ID tables.  Drivers should never modify their ID tables in their
probe handler.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23 16:24:14 +00:00
Walter Goossens 0bfd95a2a1 altera_ps2: Add devicetree support
Add match table for device tree binding.

v2: use const and add compat version.
v3: change compatible vendor to ALTR.
    add dts binding doc.
v4: condition module device table export for of.

Signed-off-by: Walter Goossens <waltergoossens@home.nl>
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
[dustan.bower@gmail.com: fixed missing semicolon]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-15 21:39:21 -07:00
Linus Torvalds 87450bd55d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: matrix_keypad - increase the limit of rows and columns
  Input: wacom - fix error path in wacom_probe()
  Input: ads7846 - check proper condition when freeing gpio
  Revert "Input: do not pass injected events back to the originating handler"
  Input: sysrq - rework re-inject logic
  Input: serio - clear pending rescans after sysfs driver rebind
  Input: rotary_encoder - use proper irqflags
  Input: wacom_w8001 - report resolution to userland
2011-02-15 09:40:27 -08:00
Duncan Laurie 19e9554153 Input: serio - clear pending rescans after sysfs driver rebind
When rebinding a serio driver via sysfs drvctl interface it is
possible for an interrupt to trigger after the disconnect of the
existing driver and before the binding of the new driver.  This will
cause the serio interrupt handler to queue a rescan event which will
disconnect the new driver immediately after it is attached.

This change removes pending rescans from the serio event queue after
processing the drvctl request but before releasing the serio mutex.

Reproduction involves issuing a rebind of device port from psmouse
driver to serio_raw driver while generating input to trigger
interrupts.  Then checking to see if the corresponding
i8042/serio4/driver is correctly attached to the serio_raw driver
instead of psmouse.

Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-02 23:01:52 -08:00
Linus Torvalds 6fb1b30425 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - pass touch resolution to clients through input_absinfo
  Input: wacom - add 2 Bamboo Pen and touch models
  Input: sysrq - ensure sysrq_enabled and __sysrq_enabled are consistent
  Input: sparse-keymap - fix KEY_VSW handling in sparse_keymap_setup
  Input: tegra-kbc - add tegra keyboard driver
  Input: gpio_keys - switch to using request_any_context_irq
  Input: serio - allow registered drivers to get status flag
  Input: ct82710c - return proper error code for ct82c710_open
  Input: bu21013_ts - added regulator support
  Input: bu21013_ts - remove duplicate resolution parameters
  Input: tnetv107x-ts - don't treat NULL clk as an error
  Input: tnetv107x-keypad - don't treat NULL clk as an error

Fix up trivial conflicts in drivers/input/keyboard/Makefile due to
additions of tc3589x/Tegra drivers
2011-01-26 16:31:44 +10:00
David Engraf 48c27016e1 Input: serio - allow registered drivers to get status flag
Parse and pass the status byte information to the registered serio
drivers as well as the data bytes.

Signed-off-by: David Engraf<david.engraf@sysgo.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-20 23:11:56 -08:00
David Rientjes 6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Davidlohr Bueso b0f05aadf1 Input: ct82710c - return proper error code for ct82c710_open
If request_irq() fails we should return the proper error instead of -1.

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-17 20:49:22 -08:00
Linus Torvalds 008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Linus Torvalds d24450e207 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: add SW_ROTATE_LOCK switch type
  Input: fix force feedback capability query example
  Input: wacom_w8001 - add single-touch support
  Input: add Austria Microsystem AS5011 joystick driver
  Input: remove aaed2000 keyboard driver
  Input: i8042 - introduce 'notimeout' blacklist for Dell Vostro V13
  Input: cy8ctmg110_ts - Convert to dev_pm_ops
  Input: migor_ts - convert to dev_pm_ops
  Input: mcs5000_ts - convert to dev_pm_ops
  Input: eeti_ts - convert to dev_pm_ops
  Input: ad7879 - convert I2C to dev_pm_ops
2011-01-13 09:58:14 -08:00
Jiri Kosina f8313ef1f4 Input: i8042 - introduce 'notimeout' blacklist for Dell Vostro V13
i8042 controller present in Dell Vostro V13 errorneously signals spurious
timeouts.

Introduce i8042.notimeout parameter for ignoring i8042-signalled timeouts
and apply this quirk automatically for Dell Vostro V13, based on DMI match.

In addition to that, this machine also needs to be added to nomux blacklist.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-08 01:38:11 -08:00
Linus Torvalds 31b6ca0af7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (58 commits)
  Input: wacom_w8001 - support pen or touch only devices
  Input: wacom_w8001 - use __set_bit to set keybits
  Input: bu21013_ts - fix misuse of logical operation in place of bitop
  Input: i8042 - add Acer Aspire 5100 to the Dritek list
  Input: wacom - add support for digitizer in Lenovo W700
  Input: psmouse - disable the synaptics extension on OLPC machines
  Input: psmouse - fix up Synaptics comment
  Input: synaptics - ignore bogus mt packet
  Input: synaptics - add multi-finger and semi-mt support
  Input: synaptics - report clickpad property
  input: mt: Document interface updates
  Input: fix double equality sign in uevent
  Input: introduce device properties
  hid: egalax: Add support for Wetab (726b)
  Input: include MT library as source for kerneldoc
  MAINTAINERS: Update input-mt entry
  hid: egalax: Add support for Samsung NB30 netbook
  hid: egalax: Document the new devices in Kconfig
  hid: egalax: Add support for Wetab
  hid: egalax: Convert to MT slots
  ...

Fixed up trivial conflict in drivers/input/keyboard/Kconfig
2011-01-07 14:45:47 -08:00
Pali Rohár a06a09c802 Input: i8042 - add Acer Aspire 5100 to the Dritek list
This patch adds notebook Acer Aspire 5100 to the list of Dritek HW. Acer
Aspire 5100 needs Dritek keyboard extension to support all Fn keys.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-27 17:23:04 -08:00
Jiri Kosina 4b7bd36470 Merge branch 'master' into for-next
Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.
2010-12-22 18:57:02 +01:00
Tony Lindgren 67b738ef32 Merge branch 'devel-omap-irq' into omap-for-linus 2010-12-10 09:44:39 -08:00
Guy Martin 7bfbeae9c7 parisc: Fix GSC PS/2 driver name for keyboard and mouse
Fix kernel warnings caused by the driver name of GSC PS/2 containing '/'.

The following warnings are observed on a K410 system :

[   10.700000] name 'GSC PS/2 keyboard'
[   10.732000] ------------[ cut here ]------------
[   10.772000] WARNING: at fs/proc/generic.c:323
[   10.828000] Modules linked in:
[   10.916000]
[   10.916000]      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[   10.936000] PSW: 00000000000001000000000000001111 Not tainted
[   10.992000] r00-03  0004000f 104fe3e0 10201ea0 00000000
[   11.060000] r04-07  4fc405c8 00000006 4fc405c8 4fc40694
[   11.124000] r08-11  4fc40708 10438aa0 00000001 1043bfc8
[   11.184000] r12-15  104ff2a0 104ff2a0 4fc38634 104ff2a0
[   11.248000] r16-19  f0001570 10479af0 f000006c 1044fe50
[   11.308000] r20-23  00000000 00000028 104cd858 00000000
[   11.372000] r24-27  ffffffff 0000000e 1044fe10 1043bbe0
[   11.436000] r28-31  0000002b 00000078 4fc40800 0000000d
[   11.496000] sr00-03  00000000 00000000 00000000 00000000
[   11.560000] sr04-07  00000000 00000000 00000000 00000000
[   11.624000]
[   11.688000] IASQ: 00000000 00000000 IAOQ: 10201ea0 10201ea4
[   11.704000]  IIR: 03ffe01f    ISR: 00000000  IOR: 0000000d
[   11.772000]  CPU:        0   CR30: 4fc40000 CR31: f01043b0
[   11.836000]  ORIG_R28: 4fc40940
[   11.904000]  IAOQ[0]: __xlate_proc_name+0x90/0xd0
[   11.940000]  IAOQ[1]: __xlate_proc_name+0x94/0xd0
[   11.996000]  RP(r2): __xlate_proc_name+0x90/0xd0
[   12.052000] Backtrace:
[   12.108000]  [<10257790>] vsnprintf+0x290/0x4f4
[   12.136000]
[   12.188000] ---[ end trace 91bf6ece17e322dd ]---
[   12.208000] serio: GSC PS/2 keyboard port at 0x0001c000 irq 19 @ 10:12:7
[   12.264000] name 'GSC PS/2 mouse'
[   12.344000] ------------[ cut here ]------------
[   12.384000] WARNING: at fs/proc/generic.c:323
[   12.436000] Modules linked in:
[   12.524000]
[   12.528000]      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[   12.544000] PSW: 00000000000001000000000000001111 Tainted: G        W
[   12.600000] r00-03  0004000f 104fe3e0 10201ea0 00000000
[   12.680000] r04-07  4fc405c8 00000006 4fc405c8 4fc40694
[   12.740000] r08-11  4fc40708 10438aa0 00000001 1043bfc8
[   12.804000] r12-15  104ff2a0 104ff2a0 4fc38634 104ff2a0
[   12.868000] r16-19  f0001570 10479af0 f000006c 1044fe50
[   12.928000] r20-23  00000000 00000025 104cd858 00000000
[   12.992000] r24-27  ffffffff 0000000e 1044fe10 1043bbe0
[   13.056000] r28-31  00000028 00000078 4fc40800 0000000d
[   13.116000] sr00-03  00000000 00000000 00000000 00000000
[   13.180000] sr04-07  00000000 00000000 00000000 00000000
[   13.244000]
[   13.308000] IASQ: 00000000 00000000 IAOQ: 10201ea0 10201ea4
[   13.324000]  IIR: 03ffe01f    ISR: 00000000  IOR: 0000000d
[   13.392000]  CPU:        0   CR30: 4fc40000 CR31: f01043b0
[   13.456000]  ORIG_R28: 4fc40940
[   13.524000]  IAOQ[0]: __xlate_proc_name+0x90/0xd0
[   13.560000]  IAOQ[1]: __xlate_proc_name+0x94/0xd0
[   13.616000]  RP(r2): __xlate_proc_name+0x90/0xd0
[   13.672000] Backtrace:
[   13.728000]  [<10257790>] vsnprintf+0x290/0x4f4
[   13.756000]
[   13.808000] ---[ end trace 91bf6ece17e322de ]---
[   13.828000] serio: GSC PS/2 mouse port at 0x00020100 irq 19 @ 10:12:8

Signed-off-by: Guy Martin <gmsoft@tuxicoman.be>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2010-12-04 11:19:59 -05:00
Joe Perches 4eb3c30b2e Input: i8042 - use pr_<level>, pr_fmt, fix dbg and __FILE__ use
Standardized message logging prefixes.
Removed \n from dbg macro, added \n to each dbg call site.
Removed direct use of __FILE__ from dbg, converted to pr_fmt(fmt)
Added non-debug printf argument verification of dbg calls
Removed "i8042.c" from printks, converted to pr_<level>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-30 23:10:20 -08:00
Tony Lindgren 9c7bc451e4 Merge branches 'devel-cleanup', 'devel-serial' and 'devel-board' into omap-for-linus 2010-11-30 14:13:15 -08:00
Janusz Krzysztofik 9632f9890e OMAP1: drop AMS_DELTA_FIQ config option
This patches removes a config option that was used to select a FIQ
handler to be build for Amstrad Delta, as required by the on-board serio
interface driver. Not having any problem reports received since it was
introduced in 2.6.35, the FIQ handler can now be built and initialized by
default, thus reqiring no extra config option.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-30 13:48:46 -08:00
Axel Lin f09830ab15 Input: ct82c710 - remove a redundant serio_register_port()
We already call serio_register_port() in ct82c710_probe(),
thus remove a redundant serio_register_port() in ct82c710_init().

Looks like this bug is introduced by
916d83cfe5
"Input: ct82c710 - convert to the new platform device interface"

[dtor@mail.ru: also move printk to where we register port]
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-21 22:32:17 -08:00
Axel Lin ebcc019926 Input: ams_delta_serio - fix wrong kfree in ams_delta_serio_exit
serio_unregister_port() will call put_device() to free the memory.
Thus remove kfree(ams_delta_serio) after
serio_unregister_port(ams_delta_serio).

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-21 22:32:13 -08:00
Axel Lin 0e86eb29de Input: ps2mult - fix wrong kfree in ps2mult_connect error path
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-21 22:32:09 -08:00
Jesper Juhl 39de52104d Input: serio HIL MLC - don't deref null, don't leak and return proper error
While reviewing various users of kernel memory allocation functions I came
across drivers/input/serio/hil_mlc.c::hil_mlc_register() and noticed that:

 - it calls kzalloc() but fails to check for a NULL return before use.
 - it makes several allocations and if one fails it doesn't free the
   previous ones.
 - It doesn't return -ENOMEM in the failed memory allocation case (it just
   crashes).

This patch corrects all of the above and also reworks the only caller of
this function that I could find
(drivers/input/serio/hp_sdc_mlc.c::hp_sdc_mlc_out()) so that it now checks
the return value of hil_mlc_register() and properly propagates it on
failure and I also restructured the code to remove some labels and goto's
to make it, IMHO nicer to read.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Tested-by: Helge Deller <deller@gmx.de>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-20 13:38:18 -08:00
Dmitry Torokhov 8ee294cd9d Input: serio - convert to common workqueue instead of a thread
Instead of creating an exclusive thread to handle serio events (which
happen rarely), let's switch to using common workqueue. With the arrival
of concurrency-managed workqueue infrastructure we are not concerned
that our callers or callees also using workqueue (no deadlocks anymore)
and it should reduce total number of threads in the system.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-18 00:25:45 -08:00
Arnd Bergmann 451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Jesse Barnes 73b14484fb Input: i8042 - add Sony VAIOs to MUX blacklist
The Sony VPCZ1 doesn't support active multiplexing and trying to enable
it causes keyboard to stop working. Since most (all?) VAIOs do not have
external PS/2 ports nor they implement active multiplexing properly, and
trying to enable MUX usually messes up keyboard/touchpad, let's simply
disable MUX probing based on board name (VAIO).

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-04 08:39:11 -07:00
Michael Witten de7fd0fc98 Kconfig: typo: boad -> board
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-02 22:47:50 -04:00
Linus Torvalds 3a99c63190 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits)
  Input: wacom - specify Cinitq supported tools
  Input: ab8500-ponkey - fix IRQ freeing in error path
  Input: adp5588-keys - use more obvious i2c_device_id name string
  Input: ad7877 - switch to using threaded IRQ
  Input: ad7877 - use attribute group to control visibility of attributes
  Input: serio - add support for PS2Mult multiplexer protocol
  Input: wacom - properly enable runtime PM
  Input: ad7877 - filter events where pressure is beyond the maximum
  Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting
  Input: ad7877 - implement specified chip select behavior
  Input: hp680_ts_input - use cancel_delayed_work_sync()
  Input: mousedev - correct lockdep annotation
  Input: ads7846 - switch to using threaded IRQ
  Input: serio - support multiple child devices per single parent
  Input: synaptics - simplify pass-through port handling
  Input: add ROHM BU21013 touch panel controller support
  Input: omap4-keypad - wake-up on events & long presses
  Input: omap4-keypad - fix interrupt line configuration
  Input: omap4-keypad - SYSCONFIG register configuration
  Input: omap4-keypad - use platform device helpers
  ...
2010-10-25 07:59:01 -07:00
Linus Torvalds 73ecf3a6e3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits)
  serial8250: ratelimit "too much work" error
  serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster
  serial: abstraction for 8250 legacy ports
  serial/imx: check that the buffer is non-empty before sending it out
  serial: mfd: add more baud rates support
  jsm: Remove the uart port on errors
  Alchemy: Add UART PM methods.
  8250: allow platforms to override PM hook.
  altera_uart: Don't use plain integer as NULL pointer
  altera_uart: Fix missing prototype for registering an early console
  altera_uart: Fixup type usage of port flags
  altera_uart: Make it possible to use Altera UART and 8250 ports together
  altera_uart: Add support for different address strides
  altera_uart: Add support for getting mapbase and IRQ from resources
  altera_uart: Add support for polling mode (IRQ-less)
  serial: Factor out uart_poll_timeout() from 8250 driver
  serial: mark the 8250 driver as maintained
  serial: 8250: Don't delay after transmitter is ready.
  tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver
  vcs: invoke the vt update callback when /dev/vcs* is written to
  ...
2010-10-22 19:59:04 -07:00
Linus Torvalds 092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Dmitry Eremin-Solenikov de838a93cb serport: place serport serio device correctly in the device tree
Make serport serio device to be a child of corresponding tty device
instead of just hanging at /sys/devices/serioX.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:19:58 -07:00
Dmitry Eremin-Solenikov fc58d12be4 Input: serio - add support for PS2Mult multiplexer protocol
PS2Mult is a simple serial protocol used for multiplexing several PS/2
streams into one serial data stream. It's used e.g. on TQM85xx series
of boards.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-18 09:33:31 -07:00
Dmitry Torokhov 3136baf8d0 Merge branch 'for-linus' into next 2010-10-17 21:20:19 -07:00
Arnd Bergmann 6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Dmitry Eremin-Solenikov 0982258264 Input: serio - support multiple child devices per single parent
Some (rare) serio devices need to have multiple serio children. One of
the examples is PS/2 multiplexer present on several TQC STKxxx boards,
which connect PS/2 keyboard and mouse to single tty port.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13 07:49:28 -07:00
Thomas Gleixner 4a4a506f81 input: Serio/hp_sdc: semaphore cleanup
Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
LKML-Reference: <20100907125055.079737758@linutronix.de>
2010-10-12 17:36:08 +02:00
Thomas Gleixner 45e8492f59 input: Serio/hil_mlc: semaphore cleanup
Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
LKML-Reference: <20100907125054.985090435@linutronix.de>
2010-10-12 17:36:08 +02:00
Christoph Fritz 594d636320 Input: i8042 - use unsigned char for 0x90
Keep the file consistent and make clear that we mean 144 instead of -112.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-29 18:26:00 -07:00
Dmitry Torokhov 53957b56d7 Input: serio - do not include linux/freezer.h
Commit ea486e6811 changed kseriod thread
to become not freezable so we do not need this include anymore.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-14 00:22:50 -07:00
Dmitry Torokhov af045b8666 Input: i8042 - fix device removal on unload
We need to call platform_device_unregister(i8042_platform_device)
before calling platform_driver_unregister() because i8042_remove()
resets i8042_platform_device to NULL. This leaves the platform device
instance behind and prevents driver reload.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=16613

Reported-by: Seryodkin Victor <vvscore@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-31 18:28:15 -07:00
Linus Torvalds 58d4ea65b9 Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6:
  mmc_spi: Fix unterminated of_match_table
  of/sparc: fix build regression from of_device changes
  of/device: Replace struct of_device with struct platform_device
2010-08-12 09:11:31 -07:00
TAMUKI Shoichi c7ff0d9c92 panic: keep blinking in spite of long spin timer mode
To keep panic_timeout accuracy when running under a hypervisor, the
current implementation only spins on long time (1 second) calls to mdelay.
 That brings a good effect, but the problem is the keyboard LEDs don't
blink at all on that situation.

This patch changes to call to panic_blink_enter() between every mdelay and
keeps blinking in spite of long spin timer mode.

The time to call to mdelay is now 100ms.  Even this change will keep
panic_timeout accuracy enough when running under a hypervisor.

Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:22 -07:00
Grant Likely 2dc1158137 of/device: Replace struct of_device with struct platform_device
of_device is just an alias for platform_device, so remove it entirely.  Also
replace to_of_device() with to_platform_device() and update comment blocks.

This patch was initially generated from the following semantic patch, and then
edited by hand to pick up the bits that coccinelle didn't catch.

@@
@@
-struct of_device
+struct platform_device

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Reviewed-by: David S. Miller <davem@davemloft.net>
2010-08-06 09:25:50 -06:00