The R8A7790 DU seems to require a 128 bytes pitch alignment, even though
the documentation only mentions a 16 pixels alignement as for the
R8A7779 DU. Make this configurable through a device flag.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DU revision in the R8A7790 SoC uses one IRQ and clock per CRTC. Add
a corresponding entry in the module platform ID table.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Output routing is configured in group registers, move the corresponding
code from rcar_du_crtc.c to rcar_du_group.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Channels are accessed through a global channel memory offset, there's no
need to define register addresses for the second channel.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The rcar_du_device structure contains a field that stores the number of
CRTCs, use it instead of the CRTCs array size. This prepares the driver
to support a variable number of CRTCs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R8A7779 DU is split in per-CRTC resources (scan-out engine, blending
unit, timings generator, ...) and device-global resources (start/stop
control, planes, ...) shared between the two CRTCs.
The R8A7790 introduced a third CRTC with its own set of global resources
This would be modeled as two separate DU device instances if it wasn't
for a handful or resources that are shared between the three CRTCs
(mostly related to input and output routing). For this reason the
R8A7790 DU must be modeled as a single device with three CRTCs, two sets
of "semi-global" resources, and a few device-global resources.
Introduce a new rcar_du_group driver-specific object, without any real
counterpart in the DU documentation, that models those semi-global
resources.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Move the plane-related fields of struct rcar_du_device to their own
structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The struct rcar_du_encoder_data encoder::field describes the encoder
type, and the rcar_du_encoder_lvds_data and rcar_du_encoder_vga_data
structures describe connector properties. Rename them accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Create a single rcar_du_encoder structure that implements a KMS encoder.
The current implementation is straightforward and only configures CRTC
output routing.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The R8A7790 DU documentation contains further information regarding the
plane Y source coordinate. Update the comment accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Some of the DU revisions use one clock and IRQ per CRTC instead of one
clock and IRQ per device. Retrieve the correct clock and register the
correct IRQ for each CRTC.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The platform device id driver data field points to a device information
structure that only contains a (currently empty) features field for now.
Support for additional model-dependent features will be added later.
Only the R8A7779 variant is currently supported.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Replace the devm_request_mem_region() and devm_ioremap_nocache() calls
with devm_ioremap_resource().
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Pull drm fixes from Dave Airlie:
"This is just a regular fixes pull apart from the qxl one, it has
radeon and intel bits in it,
The intel fixes are for a regression with the RC6 fix and a 3.10 hdmi
regression, whereas radeon is more DPM fixes, a few lockup fixes and
some rn50/r100 DAC fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon/dpm: fix r600_enable_sclk_control()
drm/radeon/dpm: implement force performance levels for rv6xx
drm/radeon/dpm: fix displaygap programming on rv6xx
drm/radeon/dpm: fix a typo in the rv6xx mclk setup
drm/i915: initialize gt_lock early with other spin locks
drm/i915: fix hdmi portclock limits
drm/radeon: fix combios tables on older cards
drm/radeon: improve dac adjust heuristics for legacy pdac
drm/radeon: Another card with wrong primary dac adj
drm/radeon: fix endian issues with DP handling (v3)
drm/radeon/vm: only align the pt base to 32k
drm/radeon: wait for 3D idle before using CP DMA
Pull qxl drm fixes from Dave Airlie:
"Okay as I warned, the qxl driver was running a bit free and loose with
its ttm object reservations and the new lockdep enabled reservation
tracking shone a bright light into it, it also with the new
reservations mutexes hits a possible deadlock during boot.
The first patch is a real fix to render the console correctly as the
driver used to just drop irq renderering as too hard, this also fixes
a sleeping while atomic warning.
The other two patches are the big ugly ones that redo how the driver
allocates objects and reserves them and makes things all work
properly, I've tested this in a VM, and compared to the current code
which hits a lockdep warning and the sleep while atomic warning before
failing.
So sorry this is coming in late, I should have tested qxl before
merging the mutex code, but I'd rather just fix qxl with this than
revert the reservations code at this point"
* 'qxl-fixes' of git://people.freedesktop.org/~airlied/linux:
qxl: convert qxl driver to proper use for reservations
qxl: allow creation of pre-pinned objects and use for releases.
drm/qxl: add delayed fb operations
- Revert of the ACPI video commit that I hoped would help fix
backlight problems related to Windows 8 compatibility on some
systems. Unfortunately, it turned out to cause problems to happen
too.
- Fix for two problems in intel_pstate, a possible failure to respond
to a load change on a quiet system and a possible failure to select
the highest available P-state on some systems. From Dirk Brandewie.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQIcBAABAgAGBQJR8ub/AAoJEKhOf7ml8uNsgeQP+QFcSyDmkVCPTiLg5UYwFAIj
nptNB108tFH3ac9eZKNNdkYUeO3aeQooACMG3OqDEMzM88EUlQY33/yWJf9LXaq9
CYh6wNhGIFLWbIm2NcdP7akbXfz9dnoty2ELvD6kfVkRfVUgdo5LJlTn+sBcKwcu
kKUWODj4776dbFvg1Qv5Q6SrFNFWvpWZpsedpAQZWZE88sLy0pwpfq2H88naH551
9PxHqJ3trihq8i2cPSgKAipcIotqubPSHKm0HGYOKo8+C+V64TcJxWIaFwYawnvB
LrnsdjC3l+0DyQIy7OztEzWr/gTi6fdeiWuTU6+6IVbJ7P1waTdVy+B/wy/25PLL
zCJ+DXfqVTiaeSh4nriQVny30XTdZL/jpeFHRdL707FbuK1LLoFSlhH+uDx9EQUc
yIabX+roV6WX2ohNc+cu+pRPuG45vs7/gPUPa167UvqR0rxNc2Qf/kWWwVH7fwFz
g5FMMWqdNRxa7XKo0VbazG9mTk023CB37CVNEHWNe9g1a3XHe6zcgq2Ea8+i4QRi
WALLCSzV8+1eA/upS1wQs8M2o3Mh+Okdu7WEN89OANQHMgyTVjHGHWIyV820XXWc
MrhvB2DeqjyREl1ks2qiuUhrGO5nipCIlgKLvI2qD0jumasLob+9e3ozMSpSrtvi
J8qR46N4/fB9eLNdPCZt
=mGfr
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These are just two fixes, a revert of the would-be backlight fix that
didn't work and an intel_pstate fix for two problems related to
maximum P-state selection.
Specifics:
- Revert of the ACPI video commit that I hoped would help fix
backlight problems related to Windows 8 compatibility on some
systems. Unfortunately, it turned out to cause problems to happen
too.
- Fix for two problems in intel_pstate, a possible failure to respond
to a load change on a quiet system and a possible failure to select
the highest available P-state on some systems. From Dirk
Brandewie"
* tag 'pm+acpi-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI / video / i915: No ACPI backlight if firmware expects Windows 8"
cpufreq / intel_pstate: Change to scale off of max P-state
We attempted to address a regression introduced by commit a57f7f9
(ACPICA: Add Windows8/Server2012 string for _OSI method.) after which
ACPI video backlight support doesn't work on a number of systems,
because the relevant AML methods in the ACPI tables in their BIOSes
become useless after the BIOS has been told that the OS is compatible
with Windows 8. That problem is tracked by the bug entry at:
https://bugzilla.kernel.org/show_bug.cgi?id=51231
Commit 8c5bd7a (ACPI / video / i915: No ACPI backlight if firmware
expects Windows 8) introduced for this purpose essentially prevented
the ACPI backlight support from being used if the BIOS had been told
that the OS was compatible with Windows 8 and the i915 driver was
loaded, in which case the backlight would always be handled by i915.
Unfortunately, however, that turned out to cause problems with
backlight to appear on multiple systems with symptoms indicating that
i915 was unable to control the backlight on those systems as
expected.
For this reason, revert commit 8c5bd7a, but leave the function
acpi_video_backlight_quirks() introduced by it, because another
commit on top of it uses that function.
References: https://lkml.org/lkml/2013/7/21/119
References: https://lkml.org/lkml/2013/7/22/261
References: https://lkml.org/lkml/2013/7/23/429
References: https://lkml.org/lkml/2013/7/23/459
References: https://lkml.org/lkml/2013/7/23/81
References: https://lkml.org/lkml/2013/7/24/27
Reported-and-tested-by: James Hogan <james@albanarts.com>
Reported-and-tested-by: Kamal Mostafa <kamal@canonical.com>
Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com>
Reported-and-tested-by: Steven Newbury <steve@snewbury.org.uk>
Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Reported-by: Kalle Valo <kvalo@adurom.com>
Tested-by: Joerg Platte <jplatte@naasa.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Brown-paper-bag pull request here. The snb rc6 fix from the last pull
broke forcewake BIOS dirt cleanup, which with fixed. But that fix broke
the spinlock init sequence, which results in an ugly BUG when spinlock
debugging is enabled :( So I get to throw another patch at cc: stable to
fix up the mess ...
* tag 'drm-intel-fixes-2013-07-25' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: initialize gt_lock early with other spin locks
drm/i915: fix hdmi portclock limits
Need to use the driver state rather than the register
state since the displays may not be enabled when the
power state is programmed.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit 181d1b9e31
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sun Jul 21 13:16:24 2013 +0200
drm/i915: fix up gt init sequence fallout
moved dev_priv->gt_lock initialization after use. Do the initialization
much earlier with other spin lock initializations.
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: stable@vger.kernel.org (since the regressing patch is also cc: stable)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The recent addition of lockdep support to reservations and their subsequent
use by TTM showed up a number of potential problems with the way qxl was using
TTM objects.
a) it was allocating objects, and reserving them later without validating
underneath the reservation, which meant in extreme conditions the objects could
be evicted before the reservation ever used them.
b) it was reserving objects straight after allocating them, but with no
ability to back off should the reservations fail. It now allocates the necessary
objects then does a complete reservation pass on them to avoid deadlocks.
c) it had two lists per release tracking objects, unnecessary complicating
the reservation process.
This patch removes the dual object tracking, adds reservations ticket support
to the release and fence object handling. It then ports the internal fb
drawing code and the userspace facing ioctl to use the new interfaces properly,
along with cleanup up the error path handling in some codepaths.
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to fix an issue with reservations we need to create the releases
as pre-pinned objects, this changes the placement interface and bo creation
interface to allow creating pinned objects to save nested reservations later.
This is just a stepping stone to main fix which follows to actually fix how
qxl deals with reservations.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Due to the nature of qxl hw we cannot queue operations while in an irq
context, so we queue these operations as best we can until atomic allocations
fail, and dequeue them later in a work queue.
Daniel looked over the locking on the list and agrees it should be sufficent.
The atomic allocs use no warn, as the last thing we want if we haven't memory
to allocate space for a printk in an irq context is more printks.
Signed-off-by: Dave Airlie <airlied@redhat.com>
In
commit 325b9d0488
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Apr 19 11:24:33 2013 +0200
drm/i915: fixup 12bpc hdmi dotclock handling
I've errornously claimed that we don't yet support the hdmi 1.4
dotclocks > 225 MHz on Haswell. But a bug report and a closer look at
the wrpll table showed that we've supported port clocks up to 300MHz.
With the new code to dynamically compute wrpll limits we should have
no issues going up to the full 340 MHz range of hdmi 1.4, so let's
just use that to fix this regression. That'll allow 4k over hdmi for
free!
v2: Drop the random hunk that somehow slipped in.
v3: Cantiga has the original HDMI dotclock limit of 165MHz. And also
patch up the mode filtering. To do so extract the dotclock limits into
a little helper function.
v4: Use 300MHz (from Bspec) instead of 340MHz (upper limit for hdmi
1.3), apparently hw is not required to be able to drive the highest
dotclocks. Suggested by Damien.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67048
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67030
Tested-by: Andreas Reis <andreas.reis@gmail.com> (v2)
Cc: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Noticed that my old Radeon 7500 hung after printing
drm: GPU not posted. posting now...
when it wasn't selected as the primary card the BIOS. Some digging
revealed that it was hanging in combios_parse_mmio_table() while
parsing the ASIC INIT 3 table. Looking at the BIOS ROM for the card,
it becomes obvious that there is no ASIC INIT 3 table in the BIOS.
The code is just processing random garbage. No surprise it hangs!
Why do I say that there is no ASIC INIT 3 table is the BIOS? This
table is found through the MISC INFO table. The MISC INFO table can
be found at offset 0x5e in the COMBIOS header. But the header is
smaller than that. The COMBIOS header starts at offset 0x126. The
standard PCI Data Structure (the bit that starts with 'PCIR') lives at
offset 0x180. That means that the COMBIOS header can not be larger
than 0x5a bytes and therefore cannot contain a MISC INFO table.
I looked at a dozen or so BIOS images, some my own, some downloaded from:
<http://www.techpowerup.com/vgabios/index.php?manufacturer=ATI&page=1>
It is fairly obvious that the size of the COMBIOS header can be found
at offset 0x6 of the header. Not sure if it is a 16-bit number or
just an 8-bit number, but that doesn't really matter since the tables
seems to be always smaller than 256 bytes.
So I think combios_get_table_offset() should check if the requested
table is present. This can be done by checking the offset against the
size of the header. See the diff below. The diff is against the WIP
OpenBSD codebase that roughly corresponds to Linux 3.8.13 at this
point. But I don't think this bit of the code changed much since
then.
For what it is worth:
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Hopefully avoid more quirks in the future due to bogus
vbios dac data.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Hello,
got another card with "too bright" problem:
Sapphire Radeon VE 7000 DDR (VGA+S-Video)
lspci -vnn:
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Sapphire Radeon VE 7000 DDR [174b:7c28]
The patch below fixes the problem for this card.
But I don't like the blacklist, couldn't some heuristic be used instead?
The interesting thing is that the manufacturer is the same as the other card
needing the same quirk. I wonder how many different types are broken this way.
The "wrong" ps2_pdac_adj value that comes from BIOS on this card is 0x300.
====================
drm/radeon: Add primary dac adj quirk for Sapphire Radeon VE 7000 DDR
Values from BIOS are wrong, causing too bright colors.
Use default values instead.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The atom interpreter expects data in LE format, so
swap the message buffer as apprioriate.
v2: properly handle non-dw aligned byte counts.
v3: properly handle remainder
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Dong He <hedonghust@gmail.com>
Cc: stable@vger.kernel.org
Make sure the 3D engine is idle before using CP DMA for
bo copies.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Marek Olšák <maraeo@gmail.com>
- fixup panel fitter readout for gen2/3 (just quitens dmesg noise)
- fix pft computations for non-autoscaled resolutions (i.e. letter/pillar
boxing on gen2/3)
- preserve the DDI A/E lane sharing bit (Stéphane Marchesin)
- fix the "rc6 fails to work after resume" regression, big thanks to
Konstantin Khlebnikov for the patch and debug insight about what
actually might be going on here
- fix Oops in is_crtc_connector_off (Chris)
- sanitize shared dpll state - our new paranoid state checker tripped up
over dirt left behind by the BIOS
- correctly restore fences, fixes the "my screen is all messed up after
resume" regression introduced in the final 3.10 pull request
- quirk backlights harder, this time for Dell XPS13 machines to fix a
regression (patch from Kamal Mostafa)
- 90% fix for some haswell hangs when accessing registers concurrently,
the 100% solution is simply too invasive for -fixes and what we have
here seems to be good enough (Chris)
* tag 'drm-intel-fixes-2013-07-22' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: fix up gt init sequence fallout
drm/i915: Serialize almost all register access
drm/i915: quirk no PCH_PWM_ENABLE for Dell XPS13 backlight
drm/i915: correctly restore fences with objects attached
drm/i915: Fix dereferencing invalid connectors in is_crtc_connector_off()
drm/i915: Sanitize shared dpll state
drm/i915: fix long-standing SNB regression in power consumption after resume v2
drm/i915: Preserve the DDI_A_4_LANES bit from the bios
drm/i915: fix pfit regression for non-autoscaled resolutions
drm/i915: fix up readout of the lvds dither bit on gen2/3
Fixes for some locking issues, and fence timeouts.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau: do not allow negative sizes for now
drm/nouveau: add falcon interrupt handler
drm/nouveau: use dedicated channel for async moves on GT/GF chipsets.
drm/nouveau: bump fence timeout to 15 seconds
drm/nouveau: do not unpin in nouveau_gem_object_del
drm/nv50/kms: fix pin refcnt leaks
drm/nouveau: fix some error-path leaks in fbcon handling code
drm/nouveau: fix locking issues in page flipping paths
Atm the crtc helper implementation of set_config has really
inconsisten semantics: If just an fb update is good enough, dpms state
will be left as-is, but if we do a full modeset we force everything to
dpms on.
This change has already been applied to the i915 modeset code in
commit e3de42b684
Author: Imre Deak <imre.deak@intel.com>
Date: Fri May 3 19:44:07 2013 +0200
drm/i915: force full modeset if the connector is in DPMS OFF mode
which according to Greg KH seems to aim for a new record in most
Bugzilla: links in a commit message.
The history of this dpms forcing is pretty interesting. This patch
here is an almost-revert of
commit 811aaa55ba
Author: Keith Packard <keithp@keithp.com>
Date: Thu Feb 3 16:57:28 2011 -0800
drm: Only set DPMS ON when actually configuring a mode
which fixed the bug of trying to dpms on disabled outputs, but
introduced the new discrepancy between an fb update only and full
modesets. The actual introduction of this goes back to
commit bf9dc102e2
Author: Keith Packard <keithp@keithp.com>
Date: Fri Nov 26 10:45:58 2010 -0800
drm: Set connector DPMS status to ON in drm_crtc_helper_set_config
And if you'd dig around in the i915 driver code there's even more fun
around forcing dpms on and losing our heads and temper of the
resulting inconsistencies. Especially the DP re-training code had tons
of funny stuff in it.
v2: So v1 totally blew up on resume on my radeon system here. After
much head-scraching I've figured out that the radeon resume functions
resumes the console system _before_ it actually restores all the
modeset state. And resuming the console systems means that fbdev doeas
an immediate ->set_par call.
Now up to this patch that ->set_par did absolutely nothing: All the
old sw state from pre-suspend was still around (since the modeset
reset wasn't done yet), which means that the set_config calls done as
a result of the ->set_par where all treated as no-ops (despite that
the real hw state was obviously something completely different).
Since v1 of this patch just added a bunch of ->dpms calls if the crtc
was enabled, those set_config calls suddenly stopped being no-ops. But
because the hw state wasn't restored the ->dpms callbacks resulted in
decent amounts of hilarity and eventual full hangs.
Since I can't review all kms drivers for such tricky ordering
constraints v2 opts for a different approach and forces a full modeset
if the connector dpms state isnt' DPMS_ON. Since the ->dpms callbacks
implemented by the modeset helpers update the connector->dpms property
we have the same effect of ensuring that the pipe is ultimately turned
on, even if we just end up updating the fb. This is the same approac
we ended up using in the intel driver.
Note that besides i915.ko only all other drivers eventually call
drm_helper_connector_dpms with the exception of vmwgfx, which does not
support dmps at all.
v3: Dave Airlie merged the broken first version of this patch, so
squash in the revert of
commit 372835a852
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sat Jun 15 00:13:13 2013 +0200
drm/crtc-helper: explicit DPMS on after modeset
Also fix up the spelling fail a bit in the commit message while at it.
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67043
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- Change from Aaron Lu makes ACPICA export a variable which can be
used by driver code to determine whether or not the BIOS believes
that we are compatible with Windows 8.
- Change from Matthew Garrett makes the ACPI video driver initialize
the ACPI backlight even if it is not going to be used afterward
(that is needed for backlight control to work on Thinkpads).
- Fix from Rafael J Wysocki implements Windows 8 backlight support
workaround making i915 take over bakclight control if the firmware
thinks it's dealing with Windows 8. Based on the work of multiple
developers including Matthew Garrett, Chun-Yi Lee, Seth Forshee,
and Aaron Lu.
- Fix from Aaron Lu makes the kernel follow Windows 8 by informing
the firmware through the _DOS method that it should not carry out
automatic brightness changes, so that brightness can be controlled
by GUI.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=vlwF
-----END PGP SIGNATURE-----
Merge tag 'acpi-video-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI video support fixes from Rafael Wysocki:
"I'm sending a separate pull request for this as it may be somewhat
controversial. The breakage addressed here is not really new and the
fixes may not satisfy all users of the affected systems, but we've had
so much back and forth dance in this area over the last several weeks
that I think it's time to actually make some progress.
The source of the problem is that about a year ago we started to tell
BIOSes that we're compatible with Windows 8, which we really need to
do, because some systems shipping with Windows 8 are tested with it
and nothing else, so if we tell their BIOSes that we aren't compatible
with Windows 8, we expose our users to untested BIOS/AML code paths.
However, as it turns out, some Windows 8-specific AML code paths are
not tested either, because Windows 8 actually doesn't use the ACPI
methods containing them, so if we declare Windows 8 compatibility and
attempt to use those ACPI methods, things break. That occurs mostly
in the backlight support area where in particular the _BCM and _BQC
methods are plain unusable on some systems if the OS declares Windows
8 compatibility.
[ The additional twist is that they actually become usable if the OS
says it is not compatible with Windows 8, but that may cause
problems to show up elsewhere ]
Investigation carried out by Matthew Garrett indicates that what
Windows 8 does about backlight is to leave backlight control up to
individual graphics drivers. At least there's evidence that it does
that if the Intel graphics driver is used, so we've decided to follow
Windows 8 in that respect and allow i915 to control backlight (Daniel
likes that part).
The first commit from Aaron Lu makes ACPICA export the variable from
which we can infer whether or not the BIOS believes that we are
compatible with Windows 8.
The second commit from Matthew Garrett prepares the ACPI video driver
by making it initialize the ACPI backlight even if it is not going to
be used afterward (that is needed for backlight control to work on
Thinkpads).
The third commit implements the actual workaround making i915 take
over backlight control if the firmware thinks it's dealing with
Windows 8 and is based on the work of multiple developers, including
Matthew Garrett, Chun-Yi Lee, Seth Forshee, and Aaron Lu.
The final commit from Aaron Lu makes us follow Windows 8 by informing
the firmware through the _DOS method that it should not carry out
automatic brightness changes, so that brightness can be controlled by
GUI.
Hopefully, this approach will allow us to avoid using blacklists of
systems that should not declare Windows 8 compatibility just to avoid
backlight control problems in the future.
- Change from Aaron Lu makes ACPICA export a variable which can be
used by driver code to determine whether or not the BIOS believes
that we are compatible with Windows 8.
- Change from Matthew Garrett makes the ACPI video driver initialize
the ACPI backlight even if it is not going to be used afterward
(that is needed for backlight control to work on Thinkpads).
- Fix from Rafael J Wysocki implements Windows 8 backlight support
workaround making i915 take over bakclight control if the firmware
thinks it's dealing with Windows 8. Based on the work of multiple
developers including Matthew Garrett, Chun-Yi Lee, Seth Forshee,
and Aaron Lu.
- Fix from Aaron Lu makes the kernel follow Windows 8 by informing
the firmware through the _DOS method that it should not carry out
automatic brightness changes, so that brightness can be controlled
by GUI"
* tag 'acpi-video-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / video: no automatic brightness changes by win8-compatible firmware
ACPI / video / i915: No ACPI backlight if firmware expects Windows 8
ACPI / video: Always call acpi_video_init_brightness() on init
ACPICA: expose OSI version
The regression fix for gen6+ rps fallout
commit 7dcd2677ea
Author: Konstantin Khlebnikov <khlebnikov@openvz.org>
Date: Wed Jul 17 10:22:58 2013 +0400
drm/i915: fix long-standing SNB regression in power consumption after resume
unintentionally also changed the init sequence ordering between
gt_init and gt_reset - we need to reset BIOS damage like leftover
forcewake references before we run our own code. Otherwise we can get
nasty dmesg noise like
[drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear.
again. Since _reset suggests that we first need to have stuff
initialized (which isn't the case here) call it sanitze instead.
While at it also block out the rps disable introduced by the above
commit on ilk: We don't have any knowledge of ilk rps being broken in
similar ways. And the disable functions uses the default hw state
which is only read out when we're enabling rps. So essentially we've
been writing random grabage into that register.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@vger.kernel.org
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In theory, the different register blocks were meant to be only ever
touched when holding either the struct_mutex, mode_config.lock or even a
specific localised lock. This does not seem to be the case, and the
hardware reacts extremely badly if we attempt to concurrently access two
registers within the same cacheline.
The HSD suggests that we only need to do this workaround for display
range registers. However, upon review we need to serialize the multiple
stages in our register write functions - if only for preemption
protection.
Irrespective of the hardware requirements, the current io functions are
a little too loose with respect to the combination of pre- and
post-condition testing that we do in conjunction with the actual io. As
a result, we may be pre-empted and generate both false-postive and
false-negative errors.
Note well that this is a "90%" solution, there remains a few direct
users of ioread/iowrite which will be fixed up in the next few patches.
Since they are more invasive and that this simple change will prevent
almost all lockups on Haswell, we kept this patch simple to facilitate
backporting to stable.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63914
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=47941
BugLink: https://bugs.launchpad.net/bugs/1163720
BugLink: https://bugs.launchpad.net/bugs/1162026
Some machines suffer from non-functional backlight controls if
BLM_PCH_PWM_ENABLE is set, so provide a quirk to avoid doing so.
Apply this quirk to Dell XPS 13 models.
Tested-by: Eric Griffith <EGriffith92@gmail.com>
Tested-by: Kent Baxley <kent.baxley@canonical.com>
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To avoid stalls we delay tiling changes and especially hold of
committing the new fence state for as long as possible.
Synchronization points are in the execbuf code and in our gtt fault
handler.
Unfortunately we've missed that tricky detail when adding proper fence
restore code in
commit 19b2dbde57
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Jun 12 10:15:12 2013 +0100
drm/i915: Restore fences after resume and GPU resets
The result was that we've restored fences for objects with no tiling,
since the object<->fence link still existed after resume. Now that
wouldn't have been too bad since any subsequent access would have
fixed things up, but if we've changed from tiled to untiled real havoc
happened:
The tiling stride is stored -1 in the fence register, so a stride of 0
resulted in all 1s in the top 32bits, and so a completely bogus fence
spanning everything from the start of the object to the top of the
GTT. The tell-tale in the register dumps looks like:
FENCE START 2: 0x0214d001
FENCE END 2: 0xfffff3ff
Bit 11 isn't set since the hw doesn't store it, even when writing all
1s (at least on my snb here).
To prevent such a gaffle in the future add a sanity check for fences
with an untiled object attached in i915_gem_write_fence.
v2: Fix the WARN, spotted by Chris.
v3: Trying to reuse get_fences looked ugly and obfuscated the code.
Instead reuse update_fence and to make it really dtrt also move the
fence dirty state clearing into update_fence.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60530
Cc: stable@vger.kernel.org (for 3.10 only)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Matthew Garrett <matthew.garrett@nebula.com>
Tested-by: Björn Bidar <theodorstormgrade@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJR0K2gAAoJEHm+PkMAQRiGWsEH+gMZSN1qRm34hZ82q1Tx7HvL
Eb/Gsl3Qw/7G2TlTqgjBUs36IdqV9O2cui/aa3/TfXvdvrx+0GlhRkEwQPc+ygcO
Mvoyoke4tT4+4jVFdCg1J8avREsa28/6oaHs0ZZxuVmJBBLTJH7aXaNsGn6eU1q9
9+p798MQis6naIiPC63somlZcCIiBhsuWCPWpEfLMn8G1HWAFTM3xXIbNBqe/brS
bmIOfhomlIZ5dcdaXGvjtP3+KJhkNDwhkPC4tVYu8JqqgSlrE+a+EGyEuuGqKk10
U+swiqyuD31uBI9ga54u/2FzSqDiAu6YOcMXevjo/m3g9XLdYbYLvN+nvN8alCQ=
=Ob6Z
-----END PGP SIGNATURE-----
Merge tag 'v3.10' into drm-intel-fixes
Backmerge Linux 3.10 to get at
commit 19b2dbde57
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Jun 12 10:15:12 2013 +0100
drm/i915: Restore fences after resume and GPU resets
That commit is not in my current -fixes pile since that's based on my
-next queue for 3.11. And the above mentioned fix was merged really
late into 3.10 (and blew up, bad me) so was on a diverging branch.
Option B would have been to rebase my current pile of fixes onto
Dave's drm-fixes branch. But since some of the patches here are a bit
tricky I've decided not to void all the testing by moving over the
entire merge window.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
more DPM fixes for radeon.
* 'drm-fixes-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/dpm: add debugfs support for RS780/RS880 (v3)
drm/radeon/dpm/atom: fix broken gcc harder
drm/radeon/dpm/atom: restructure logic to work around a compiler bug
drm/radeon/dpm: fix atom vram table parsing
drm/radeon: fix an endian bug in atom table parsing
drm/radeon: add a module parameter to disable aspm
Laurent Pinchart