There are several occasions where we do not update the inode's number of
used bytes atomically, resulting in a concurrent stat(2) syscall to report
a value of used blocks that does not correspond to a valid value, that is,
a value that does not match neither what we had before the operation nor
what we get after the operation completes.
In extreme cases it can result in stat(2) reporting zero used blocks, which
can cause problems for some userspace tools where they can consider a file
with a non-zero size and zero used blocks as completely sparse and skip
reading data, as reported/discussed a long time ago in some threads like
the following:
https://lists.gnu.org/archive/html/bug-tar/2016-07/msg00001.html
The cases where this can happen are the following:
-> Case 1
If we do a write (buffered or direct IO) against a file region for which
there is already an allocated extent (or multiple extents), then we have a
short time window where we can report a number of used blocks to stat(2)
that does not take into account the file region being overwritten. This
short time window happens when completing the ordered extent(s).
This happens because when we drop the extents in the write range we
decrement the inode's number of bytes and later on when we insert the new
extent(s) we increment the number of bytes in the inode, resulting in a
short time window where a stat(2) syscall can get an incorrect number of
used blocks.
If we do writes that overwrite an entire file, then we have a short time
window where we report 0 used blocks to stat(2).
Example reproducer:
$ cat reproducer-1.sh
#!/bin/bash
MNT=/mnt/sdi
DEV=/dev/sdi
stat_loop()
{
trap "wait; exit" SIGTERM
local filepath=$1
local expected=$2
local got
while :; do
got=$(stat -c %b $filepath)
if [ $got -ne $expected ]; then
echo -n "ERROR: unexpected used blocks"
echo " (got: $got expected: $expected)"
fi
done
}
mkfs.btrfs -f $DEV > /dev/null
# mkfs.xfs -f $DEV > /dev/null
# mkfs.ext4 -F $DEV > /dev/null
# mkfs.f2fs -f $DEV > /dev/null
# mkfs.reiserfs -f $DEV > /dev/null
mount $DEV $MNT
xfs_io -f -s -c "pwrite -b 64K 0 64K" $MNT/foobar >/dev/null
expected=$(stat -c %b $MNT/foobar)
# Create a process to keep calling stat(2) on the file and see if the
# reported number of blocks used (disk space used) changes, it should
# not because we are not increasing the file size nor punching holes.
stat_loop $MNT/foobar $expected &
loop_pid=$!
for ((i = 0; i < 50000; i++)); do
xfs_io -s -c "pwrite -b 64K 0 64K" $MNT/foobar >/dev/null
done
kill $loop_pid &> /dev/null
wait
umount $DEV
$ ./reproducer-1.sh
ERROR: unexpected used blocks (got: 0 expected: 128)
ERROR: unexpected used blocks (got: 0 expected: 128)
(...)
Note that since this is a short time window where the race can happen, the
reproducer may not be able to always trigger the bug in one run, or it may
trigger it multiple times.
-> Case 2
If we do a buffered write against a file region that does not have any
allocated extents, like a hole or beyond EOF, then during ordered extent
completion we have a short time window where a concurrent stat(2) syscall
can report a number of used blocks that does not correspond to the value
before or after the write operation, a value that is actually larger than
the value after the write completes.
This happens because once we start a buffered write into an unallocated
file range we increment the inode's 'new_delalloc_bytes', to make sure
any stat(2) call gets a correct used blocks value before delalloc is
flushed and completes. However at ordered extent completion, after we
inserted the new extent, we increment the inode's number of bytes used
with the size of the new extent, and only later, when clearing the range
in the inode's iotree, we decrement the inode's 'new_delalloc_bytes'
counter with the size of the extent. So this results in a short time
window where a concurrent stat(2) syscall can report a number of used
blocks that accounts for the new extent twice.
Example reproducer:
$ cat reproducer-2.sh
#!/bin/bash
MNT=/mnt/sdi
DEV=/dev/sdi
stat_loop()
{
trap "wait; exit" SIGTERM
local filepath=$1
local expected=$2
local got
while :; do
got=$(stat -c %b $filepath)
if [ $got -ne $expected ]; then
echo -n "ERROR: unexpected used blocks"
echo " (got: $got expected: $expected)"
fi
done
}
mkfs.btrfs -f $DEV > /dev/null
# mkfs.xfs -f $DEV > /dev/null
# mkfs.ext4 -F $DEV > /dev/null
# mkfs.f2fs -f $DEV > /dev/null
# mkfs.reiserfs -f $DEV > /dev/null
mount $DEV $MNT
touch $MNT/foobar
write_size=$((64 * 1024))
for ((i = 0; i < 16384; i++)); do
offset=$(($i * $write_size))
xfs_io -c "pwrite -S 0xab $offset $write_size" $MNT/foobar >/dev/null
blocks_used=$(stat -c %b $MNT/foobar)
# Fsync the file to trigger writeback and keep calling stat(2) on it
# to see if the number of blocks used changes.
stat_loop $MNT/foobar $blocks_used &
loop_pid=$!
xfs_io -c "fsync" $MNT/foobar
kill $loop_pid &> /dev/null
wait $loop_pid
done
umount $DEV
$ ./reproducer-2.sh
ERROR: unexpected used blocks (got: 265472 expected: 265344)
ERROR: unexpected used blocks (got: 284032 expected: 283904)
(...)
Note that since this is a short time window where the race can happen, the
reproducer may not be able to always trigger the bug in one run, or it may
trigger it multiple times.
-> Case 3
Another case where such problems happen is during other operations that
replace extents in a file range with other extents. Those operations are
extent cloning, deduplication and fallocate's zero range operation.
The cause of the problem is similar to the first case. When we drop the
extents from a range, we decrement the inode's number of bytes, and later
on, after inserting the new extents we increment it. Since this is not
done atomically, a concurrent stat(2) call can see and return a number of
used blocks that is smaller than it should be, does not match the number
of used blocks before or after the clone/deduplication/zero operation.
Like for the first case, when doing a clone, deduplication or zero range
operation against an entire file, we end up having a time window where we
can report 0 used blocks to a stat(2) call.
Example reproducer:
$ cat reproducer-3.sh
#!/bin/bash
MNT=/mnt/sdi
DEV=/dev/sdi
mkfs.btrfs -f $DEV > /dev/null
# mkfs.xfs -f -m reflink=1 $DEV > /dev/null
mount $DEV $MNT
extent_size=$((64 * 1024))
num_extents=16384
file_size=$(($extent_size * $num_extents))
# File foo has many small extents.
xfs_io -f -s -c "pwrite -S 0xab -b $extent_size 0 $file_size" $MNT/foo \
> /dev/null
# File bar has much less extents and has exactly the same data as foo.
xfs_io -f -c "pwrite -S 0xab 0 $file_size" $MNT/bar > /dev/null
expected=$(stat -c %b $MNT/foo)
# Now deduplicate bar into foo. While the deduplication is in progres,
# the number of used blocks/file size reported by stat should not change
xfs_io -c "dedupe $MNT/bar 0 0 $file_size" $MNT/foo > /dev/null &
dedupe_pid=$!
while [ -n "$(ps -p $dedupe_pid -o pid=)" ]; do
used=$(stat -c %b $MNT/foo)
if [ $used -ne $expected ]; then
echo "Unexpected blocks used: $used (expected: $expected)"
fi
done
umount $DEV
$ ./reproducer-3.sh
Unexpected blocks used: 2076800 (expected: 2097152)
Unexpected blocks used: 2097024 (expected: 2097152)
Unexpected blocks used: 2079872 (expected: 2097152)
(...)
Note that since this is a short time window where the race can happen, the
reproducer may not be able to always trigger the bug in one run, or it may
trigger it multiple times.
So fix this by:
1) Making btrfs_drop_extents() not decrement the VFS inode's number of
bytes, and instead return the number of bytes;
2) Making any code that drops extents and adds new extents update the
inode's number of bytes atomically, while holding the btrfs inode's
spinlock, which is also used by the stat(2) callback to get the inode's
number of bytes;
3) For ranges in the inode's iotree that are marked as 'delalloc new',
corresponding to previously unallocated ranges, increment the inode's
number of bytes when clearing the 'delalloc new' bit from the range,
in the same critical section that decrements the inode's
'new_delalloc_bytes' counter, delimited by the btrfs inode's spinlock.
An alternative would be to have btrfs_getattr() wait for any IO (ordered
extents in progress) and locking the whole range (0 to (u64)-1) while it
it computes the number of blocks used. But that would mean blocking
stat(2), which is a very used syscall and expected to be fast, waiting
for writes, clone/dedupe, fallocate, page reads, fiemap, etc.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are many arguments for __btrfs_drop_extents() and its wrapper
btrfs_drop_extents(), which makes it hard to add more arguments to it and
requires changing every caller. I have added a couple myself back in 2014
commit 1acae57b16 ("Btrfs: faster file extent item replace operations")
and therefore know firsthand that it is a bit cumbersome to add additional
arguments to these functions.
Since I will need to add more arguments in a subsequent bug fix, this
change is preparatory work and adds a data structure that holds all the
arguments, for both input and output, that are passed to this function,
with some comments in the structure's definition mentioning what each
field is and how it relates to other fields.
Callers of this function need only to zero out the content of the
structure and setup only the fields they need. This also removes the
need to have both __btrfs_drop_extents() and btrfs_drop_extents(), so
now we have a single function named btrfs_drop_extents() that takes a
pointer to this new data structure (struct btrfs_drop_extents_args).
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Historically we've allowed recursive locking specifically for the free
space inode. This is because we are only doing reads and know that it's
safe. However we don't actually need this feature, we can get away with
reading the commit root for the extents. In fact if we want to allow
asynchronous loading of the free space cache we have to use the commit
root, otherwise we will deadlock.
Switch to using the commit root for the file extents. These are only
read at load time, and are replaced as soon as we start writing the
cache out to disk. The cache is never read again, so this is
legitimate. This matches what we do for the inode itself, as we read
that from the commit root as well.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We no longer distinguish between blocking and spinning, so rip out all
this code.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we're using a rw_semaphore we no longer need to indicate if a
lock is blocking or not, nor do we need to flip the entire path from
blocking to spinning. Remove these helpers and all the places they are
called.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fs_info value is 32bit, switch also the local u16 variables. This
leads to a better assembly code generated due to movzwl.
This simple change will shave some bytes on x86_64 and release config:
text data bss dec hex filename
1090000 17980 14912 1122892 11224c pre/btrfs.ko
1089794 17980 14912 1122686 11217e post/btrfs.ko
DELTA: -206
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_get_16 shows up in the system performance profiles (helper to read
16bit values from on-disk structures). This is partially because of the
checksum size that's frequently read along with data reads/writes, other
u16 uses are from item size or directory entries.
Replace all calls to btrfs_super_csum_size by the cached value from
fs_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The value of super_block::s_blocksize_bits is the same as
fs_info::sectorsize_bits, but we don't need to do the extra dereferences
in many functions and storing the bits as u32 (in fs_info) generates
shorter assembly.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For check_data_csum(), the page we're using is directly from the inode
mapping, thus it has valid page_offset().
We can use (page_offset() + pg_off) to replace @start parameter
completely, while the @len should always be sectorsize.
Since we're here, also add some comment, as there are quite some
confusion in words like start/offset, without explaining whether it's
file_offset or logical bytenr.
This should not affect the existing behavior, as for current sectorsize
== PAGE_SIZE case, @pgoff should always be 0, and len is always
PAGE_SIZE (or sectorsize from the dio read path).
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers of btrfs_wq_submit_bio() pass struct inode as @private_data,
so there is no need for it to be (void *), replace it with "struct inode
*inode".
While we can extract fs_info from struct inode, also remove the @fs_info
parameter.
Since we're here, also replace all the (void *private_data) into (struct
inode *inode).
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The @failed_start parameter is only paired with @exclusive_bits, and
those parameters are only used for EXTENT_LOCKED bit, which have their
own wrappers lock_extent_bits().
Thus for regular set_extent_bit() calls, the failed_start makes no
sense, just sink the parameter.
Also, since @failed_start and @exclusive_bits are used in pairs, add
an assert to make it obvious.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The drop_level member is used directly unlike all the other int types in
root_item. Add the definition and use it everywhere. The type is u8 so
there's no conversion necessary and the helpers are properly inlined,
this is for consistency.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This effectively reverts 09745ff88d93 ("btrfs: dio iomap DSYNC
workaround") now that the iomap API has been updated to allow
iomap_dio_complete() not to be called under i_rwsem anymore.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The inode dio_sem can be eliminated because all DIO synchronization is
now performed through inode->i_rwsem that provides the same guarantees.
This reduces btrfs_inode size by 40 bytes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_inode_lock/unlock() are wrappers around inode locks, separating
the type of lock and actual locking.
- 0 - default, exclusive lock
- BTRFS_ILOCK_SHARED - for shared locks, for possible parallel DIO
- BTRFS_ILOCK_TRY - for the RWF_NOWAIT sequence
The bits SHARED and TRY can be combined together.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The read and write DIO don't have anything in common except for the
call to iomap_dio_rw. Extract the write call into a new function to get
rid of conditional statements for direct write.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
In the face of extent root corruption, or any other core fs wide root
corruption we will fail to mount the file system. This makes recovery
kind of a pain, because you need to fall back to userspace tools to
scrape off data. Instead provide a mechanism to gracefully handle bad
roots, so we can at least mount read-only and possibly recover data from
the file system.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we move to being able to handle NULL csum_roots it'll be cleaner to
just check in btrfs_lookup_bio_sums instead of at all of the caller
locations, so push the NODATASUM check into it as well so it's unified.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing a buffered write, through one of the write family syscalls, we
look for ranges which currently don't have allocated extents and set the
'delalloc new' bit on them, so that we can report a correct number of used
blocks to the stat(2) syscall until delalloc is flushed and ordered extents
complete.
However there are a few other places where we can do a buffered write
against a range that is mapped to a hole (no extent allocated) and where
we do not set the 'new delalloc' bit. Those places are:
- Doing a memory mapped write against a hole;
- Cloning an inline extent into a hole starting at file offset 0;
- Calling btrfs_cont_expand() when the i_size of the file is not aligned
to the sector size and is located in a hole. For example when cloning
to a destination offset beyond EOF.
So after such cases, until the corresponding delalloc range is flushed and
the respective ordered extents complete, we can report an incorrect number
of blocks used through the stat(2) syscall.
In some cases we can end up reporting 0 used blocks to stat(2), which is a
particular bad value to report as it may mislead tools to think a file is
completely sparse when its i_size is not zero, making them skip reading
any data, an undesired consequence for tools such as archivers and other
backup tools, as reported a long time ago in the following thread (and
other past threads):
https://lists.gnu.org/archive/html/bug-tar/2016-07/msg00001.html
Example reproducer:
$ cat reproducer.sh
#!/bin/bash
MNT=/mnt/sdi
DEV=/dev/sdi
mkfs.btrfs -f $DEV > /dev/null
# mkfs.xfs -f $DEV > /dev/null
# mkfs.ext4 -F $DEV > /dev/null
# mkfs.f2fs -f $DEV > /dev/null
mount $DEV $MNT
xfs_io -f -c "truncate 64K" \
-c "mmap -w 0 64K" \
-c "mwrite -S 0xab 0 64K" \
-c "munmap" \
$MNT/foo
blocks_used=$(stat -c %b $MNT/foo)
echo "blocks used: $blocks_used"
if [ $blocks_used -eq 0 ]; then
echo "ERROR: blocks used is 0"
fi
umount $DEV
$ ./reproducer.sh
blocks used: 0
ERROR: blocks used is 0
So move the logic that decides to set the 'delalloc bit' bit into the
function btrfs_set_extent_delalloc(), since that is what we use for all
those missing cases as well as for the cases that currently work well.
This change is also preparatory work for an upcoming patch that fixes
other problems related to tracking and reporting the number of bytes used
by an inode.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing a fallocate() we have a short time window, after reserving an
extent and before starting a transaction, where if relocation for the block
group containing the reserved extent happens, we can end up missing the
extent in the data relocation inode causing relocation to fail later.
This only happens when we don't pass a transaction to the internal
fallocate function __btrfs_prealloc_file_range(), which is for all the
cases where fallocate() is called from user space (the internal use cases
include space cache extent allocation and relocation).
When the race triggers the relocation failure, it produces a trace like
the following:
[200611.995995] ------------[ cut here ]------------
[200611.997084] BTRFS: Transaction aborted (error -2)
[200611.998208] WARNING: CPU: 3 PID: 235845 at fs/btrfs/ctree.c:1074 __btrfs_cow_block+0x3a0/0x5b0 [btrfs]
[200611.999042] Modules linked in: dm_thin_pool dm_persistent_data (...)
[200612.003287] CPU: 3 PID: 235845 Comm: btrfs Not tainted 5.9.0-rc6-btrfs-next-69 #1
[200612.004442] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[200612.006186] RIP: 0010:__btrfs_cow_block+0x3a0/0x5b0 [btrfs]
[200612.007110] Code: 1b 00 00 02 72 2a 83 f8 fb 0f 84 b8 01 (...)
[200612.007341] BTRFS warning (device sdb): Skipping commit of aborted transaction.
[200612.008959] RSP: 0018:ffffaee38550f918 EFLAGS: 00010286
[200612.009672] BTRFS: error (device sdb) in cleanup_transaction:1901: errno=-30 Readonly filesystem
[200612.010428] RAX: 0000000000000000 RBX: ffff9174d96f4000 RCX: 0000000000000000
[200612.011078] BTRFS info (device sdb): forced readonly
[200612.011862] RDX: 0000000000000001 RSI: ffffffffa8161978 RDI: 00000000ffffffff
[200612.013215] RBP: ffff9172569a0f80 R08: 0000000000000000 R09: 0000000000000000
[200612.014263] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9174b8403b88
[200612.015203] R13: ffff9174b8400a88 R14: ffff9174c90f1000 R15: ffff9174a5a60e08
[200612.016182] FS: 00007fa55cf878c0(0000) GS:ffff9174ece00000(0000) knlGS:0000000000000000
[200612.017174] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[200612.018418] CR2: 00007f8fb8048148 CR3: 0000000428a46003 CR4: 00000000003706e0
[200612.019510] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[200612.020648] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[200612.021520] Call Trace:
[200612.022434] btrfs_cow_block+0x10b/0x250 [btrfs]
[200612.023407] do_relocation+0x54e/0x7b0 [btrfs]
[200612.024343] ? do_raw_spin_unlock+0x4b/0xc0
[200612.025280] ? _raw_spin_unlock+0x29/0x40
[200612.026200] relocate_tree_blocks+0x3bc/0x6d0 [btrfs]
[200612.027088] relocate_block_group+0x2f3/0x600 [btrfs]
[200612.027961] btrfs_relocate_block_group+0x15e/0x340 [btrfs]
[200612.028896] btrfs_relocate_chunk+0x38/0x110 [btrfs]
[200612.029772] btrfs_balance+0xb22/0x1790 [btrfs]
[200612.030601] ? btrfs_ioctl_balance+0x253/0x380 [btrfs]
[200612.031414] btrfs_ioctl_balance+0x2cf/0x380 [btrfs]
[200612.032279] btrfs_ioctl+0x620/0x36f0 [btrfs]
[200612.033077] ? _raw_spin_unlock+0x29/0x40
[200612.033948] ? handle_mm_fault+0x116d/0x1ca0
[200612.034749] ? up_read+0x18/0x240
[200612.035542] ? __x64_sys_ioctl+0x83/0xb0
[200612.036244] __x64_sys_ioctl+0x83/0xb0
[200612.037269] do_syscall_64+0x33/0x80
[200612.038190] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[200612.038976] RIP: 0033:0x7fa55d07ed87
[200612.040127] Code: 00 00 00 48 8b 05 09 91 0c 00 64 c7 00 26 (...)
[200612.041669] RSP: 002b:00007ffd5ebf03e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
[200612.042437] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fa55d07ed87
[200612.043511] RDX: 00007ffd5ebf0470 RSI: 00000000c4009420 RDI: 0000000000000003
[200612.044250] RBP: 0000000000000003 R08: 000055d8362642a0 R09: 00007fa55d148be0
[200612.044963] R10: fffffffffffff52e R11: 0000000000000206 R12: 00007ffd5ebf1614
[200612.045683] R13: 00007ffd5ebf0470 R14: 0000000000000002 R15: 00007ffd5ebf0470
[200612.046361] irq event stamp: 0
[200612.047040] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[200612.047725] hardirqs last disabled at (0): [<ffffffffa6eb5ab3>] copy_process+0x823/0x1bc0
[200612.048387] softirqs last enabled at (0): [<ffffffffa6eb5ab3>] copy_process+0x823/0x1bc0
[200612.049024] softirqs last disabled at (0): [<0000000000000000>] 0x0
[200612.049722] ---[ end trace 49006c6876e65227 ]---
The race happens like this:
1) Task A starts an fallocate() (plain or zero range) and it calls
__btrfs_prealloc_file_range() with the 'trans' parameter set to NULL;
2) Task A calls btrfs_reserve_extent() and gets an extent that belongs to
block group X;
3) Before task A gets into btrfs_replace_file_extents(), through the call
to insert_prealloc_file_extent(), task B starts relocation of block
group X;
4) Task B enters btrfs_relocate_block_group() and it sets block group X to
RO mode;
5) Task B enters relocate_block_group(), it calls prepare_to_relocate()
whichs joins/starts a transaction and then commits the transaction;
6) Task B then starts scanning the extent tree looking for extents that
belong to block group X - it does not find yet the extent reserved by
task A, since that extent was not yet added to the extent tree, as its
delayed reference was not even yet created at this point;
7) The data relocation inode ends up not having the extent reserved by
task A associated to it;
8) Task A then starts a transaction through btrfs_replace_file_extents(),
inserts a file extent item in the subvolume tree pointing to the
reserved extent and creates a delayed reference for it;
9) Task A finishes and returns success to user space;
10) Later on, while relocation is still in progress, the leaf where task A
inserted the new file extent item is COWed, so we end up at
__btrfs_cow_block(), which calls btrfs_reloc_cow_block(), and that in
turn calls relocation.c:replace_file_extents();
11) At relocation.c:replace_file_extents() we iterate over all the items in
the leaf and find the file extent item pointing to the extent that was
allocated by task A, and then call relocation.c:get_new_location(), to
find the new location for the extent;
12) However relocation.c:get_new_location() fails, returning -ENOENT,
because it couldn't find a corresponding file extent item associated
with the data relocation inode. This is because the extent was not seen
in the extent tree at step 6). The -ENOENT error is propagated to
__btrfs_cow_block(), which aborts the transaction.
So fix this simply by decrementing the block group's number of reservations
after calling insert_prealloc_file_extent(), as relocation waits for that
counter to go down to zero before calling prepare_to_relocate() and start
looking for extents in the extent tree.
This issue only started to happen recently as of commit 8fccebfa53
("btrfs: fix metadata reservation for fallocate that leads to transaction
aborts"), because now we can reserve an extent before starting/joining a
transaction, and previously we always did it after that, so relocation
ended up waiting for a concurrent fallocate() to finish because before
searching for the extents of the block group, it starts/joins a transaction
and then commits it (at prepare_to_relocate()), which made it wait for the
fallocate task to complete first.
Fixes: 8fccebfa53 ("btrfs: fix metadata reservation for fallocate that leads to transaction aborts")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 8d875f95da ("btrfs: disable strict file flushes for
renames and truncates") eliminated the notion of ordered operations and
instead BTRFS_INODE_ORDERED_DATA_CLOSE only remained as a flag
indicating that a file's content should be synced to disk in case a
file is truncated and any writes happen to it concurrently. In fact
this intendend behavior was broken until it was fixed in
f6dc45c7a9 ("Btrfs: fix filemap_flush call in btrfs_file_release").
All things considered let's give the flag a more descriptive name. Also
slightly reword comments.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we now perform direct reads using i_rwsem, we can remove this
inode flag used to co-ordinate unlocked reads.
The truncate call takes i_rwsem. This means it is correctly synchronized
with concurrent direct reads.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's no longer used just remove the function and any related code which
was initialising it for inodes. No functional changes.
Removing 8 bytes from extent_io_tree in turn reduces size of other
structures where it is embedded, notably btrfs_inode where it reduces
size by 24 bytes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead export and rename the function to btrfs_submit_data_bio and
call it directly in submit_one_bio. This avoids paying the cost for
speculative attacks mitigations and improves code readability.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's no longer used so let's remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Don't call readpage_end_io_hook for the btree inode. Instead of relying
on indirect calls to implement metadata buffer validation simply check
if the inode whose page we are processing equals the btree inode. If it
does call the necessary function.
This is an improvement in 2 directions:
1. We aren't paying the penalty of indirect calls in a post-speculation
attacks world.
2. The function is now named more explicitly so it's obvious what's
going on
This is in preparation to removing struct extent_io_ops altogether.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The passed in ordered_extent struct is always well-formed and contains
the inode making the explicit argument redundant.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's used to reference the csum root which can be done from the trans
handle as well. Simplify the signature and while at it also remove the
noinline attribute as the function uses only at most 16 bytes of stack
space.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This makes reading the code a tad easier by decreasing the level of
indirection by one.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's always set to 0 by its sole caller - btrfs_readpage. Simply remove
it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's always set to 0 from the sole caller - btrfs_readpage.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that btrfs_readpage is the only caller of extent_read_full_page the
latter can be open coded in the former. Use the occassion to rename
__extent_read_full_page to extent_read_full_page. To facillitate this
change submit_one_bio has to be exported as well.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's called only from btrfs_readpage which always passes 0 so just sink
the argument into extent_read_full_page.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that this function is only responsible for reading data pages it's
no longer necessary to pass get_extent_t parameter across several
layers of functions. This patch removes this parameter from multiple
functions: __get_extent_map/__do_readpage/__extent_read_full_page/
extent_read_full_page and simply calls btrfs_get_extent directly in
__get_extent_map.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_punch_hole_range() is now used to replace all the file
extents in a given file range with an extent described in the given struct
btrfs_replace_extent_info argument. This extent can either be an existing
extent that is being cloned or it can be a new extent (namely a prealloc
extent). When that argument is NULL it only punches a hole (drops all the
existing extents) in the file range.
So rename the function to btrfs_replace_file_extents().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we can use btrfs_clone_extent_info to convey information for a
new prealloc extent as well, and not just for existing extents that are
being cloned, rename it to btrfs_replace_extent_info, which reflects the
fact that this is now more generic and it is used to replace all existing
extents in a file range with the extent described by the structure.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The value of item_size of struct btrfs_clone_extent_info is always set to
the size of a non-inline file extent item, and in fact the infrastructure
that uses this structure (btrfs_punch_hole_range()) does not work with
inline file extents at all (and it is not supposed to).
So just remove that field from the structure and use directly
sizeof(struct btrfs_file_extent_item) instead. Also assert that the
file extent type is not inline at btrfs_insert_clone_extent().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing an fallocate(), specially a zero range operation, we assume
that reserving 3 units of metadata space is enough, that at most we touch
one leaf in subvolume/fs tree for removing existing file extent items and
inserting a new file extent item. This assumption is generally true for
most common use cases. However when we end up needing to remove file extent
items from multiple leaves, we can end up failing with -ENOSPC and abort
the current transaction, turning the filesystem to RO mode. When this
happens a stack trace like the following is dumped in dmesg/syslog:
[ 1500.620934] ------------[ cut here ]------------
[ 1500.620938] BTRFS: Transaction aborted (error -28)
[ 1500.620973] WARNING: CPU: 2 PID: 30807 at fs/btrfs/inode.c:9724 __btrfs_prealloc_file_range+0x512/0x570 [btrfs]
[ 1500.620974] Modules linked in: btrfs intel_rapl_msr intel_rapl_common kvm_intel (...)
[ 1500.621010] CPU: 2 PID: 30807 Comm: xfs_io Tainted: G W 5.9.0-rc3-btrfs-next-67 #1
[ 1500.621012] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 1500.621023] RIP: 0010:__btrfs_prealloc_file_range+0x512/0x570 [btrfs]
[ 1500.621026] Code: 8b 40 50 f0 48 (...)
[ 1500.621028] RSP: 0018:ffffb05fc8803ca0 EFLAGS: 00010286
[ 1500.621030] RAX: 0000000000000000 RBX: ffff9608af276488 RCX: 0000000000000000
[ 1500.621032] RDX: 0000000000000001 RSI: 0000000000000027 RDI: 00000000ffffffff
[ 1500.621033] RBP: ffffb05fc8803d90 R08: 0000000000000001 R09: 0000000000000001
[ 1500.621035] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000003200000
[ 1500.621037] R13: 00000000ffffffe4 R14: ffff9608af275fe8 R15: ffff9608af275f60
[ 1500.621039] FS: 00007fb5b2368ec0(0000) GS:ffff9608b6600000(0000) knlGS:0000000000000000
[ 1500.621041] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1500.621043] CR2: 00007fb5b2366fb8 CR3: 0000000202d38005 CR4: 00000000003706e0
[ 1500.621046] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1500.621047] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1500.621049] Call Trace:
[ 1500.621076] btrfs_prealloc_file_range+0x10/0x20 [btrfs]
[ 1500.621087] btrfs_fallocate+0xccd/0x1280 [btrfs]
[ 1500.621108] vfs_fallocate+0x14d/0x290
[ 1500.621112] ksys_fallocate+0x3a/0x70
[ 1500.621117] __x64_sys_fallocate+0x1a/0x20
[ 1500.621120] do_syscall_64+0x33/0x80
[ 1500.621123] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1500.621126] RIP: 0033:0x7fb5b248c477
[ 1500.621128] Code: 89 7c 24 08 (...)
[ 1500.621130] RSP: 002b:00007ffc7bee9060 EFLAGS: 00000293 ORIG_RAX: 000000000000011d
[ 1500.621132] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fb5b248c477
[ 1500.621134] RDX: 0000000000000000 RSI: 0000000000000010 RDI: 0000000000000003
[ 1500.621136] RBP: 0000557718faafd0 R08: 0000000000000000 R09: 0000000000000000
[ 1500.621137] R10: 0000000003200000 R11: 0000000000000293 R12: 0000000000000010
[ 1500.621139] R13: 0000557718faafb0 R14: 0000557718faa480 R15: 0000000000000003
[ 1500.621151] irq event stamp: 1026217
[ 1500.621154] hardirqs last enabled at (1026223): [<ffffffffba965570>] console_unlock+0x500/0x5c0
[ 1500.621156] hardirqs last disabled at (1026228): [<ffffffffba9654c7>] console_unlock+0x457/0x5c0
[ 1500.621159] softirqs last enabled at (1022486): [<ffffffffbb6003dc>] __do_softirq+0x3dc/0x606
[ 1500.621161] softirqs last disabled at (1022477): [<ffffffffbb4010b2>] asm_call_on_stack+0x12/0x20
[ 1500.621162] ---[ end trace 2955b08408d8b9d4 ]---
[ 1500.621167] BTRFS: error (device sdj) in __btrfs_prealloc_file_range:9724: errno=-28 No space left
When we use fallocate() internally, for reserving an extent for a space
cache, inode cache or relocation, we can't hit this problem since either
there aren't any file extent items to remove from the subvolume tree or
there is at most one.
When using plain fallocate() it's very unlikely, since that would require
having many file extent items representing holes for the target range and
crossing multiple leafs - we attempt to increase the range (merge) of such
file extent items when punching holes, so at most we end up with 2 file
extent items for holes at leaf boundaries.
However when using the zero range operation of fallocate() for a large
range (100+ MiB for example) that's fairly easy to trigger. The following
example reproducer triggers the issue:
$ cat reproducer.sh
#!/bin/bash
umount /dev/sdj &> /dev/null
mkfs.btrfs -f -n 16384 -O ^no-holes /dev/sdj > /dev/null
mount /dev/sdj /mnt/sdj
# Create a 100M file with many file extent items. Punch a hole every 8K
# just to speedup the file creation - we could do 4K sequential writes
# followed by fsync (or O_SYNC) as well, but that takes a lot of time.
file_size=$((100 * 1024 * 1024))
xfs_io -f -c "pwrite -S 0xab -b 10M 0 $file_size" /mnt/sdj/foobar
for ((i = 0; i < $file_size; i += 8192)); do
xfs_io -c "fpunch $i 4096" /mnt/sdj/foobar
done
# Force a transaction commit, so the zero range operation will be forced
# to COW all metadata extents it need to touch.
sync
xfs_io -c "fzero 0 $file_size" /mnt/sdj/foobar
umount /mnt/sdj
$ ./reproducer.sh
wrote 104857600/104857600 bytes at offset 0
100 MiB, 10 ops; 0.0669 sec (1.458 GiB/sec and 149.3117 ops/sec)
fallocate: No space left on device
$ dmesg
<shows the same stack trace pasted before>
To fix this use the existing infrastructure that hole punching and
extent cloning use for replacing a file range with another extent. This
deals with doing the removal of file extent items and inserting the new
one using an incremental approach, reserving more space when needed and
always ensuring we don't leave an implicit hole in the range in case
we need to do multiple iterations and a crash happens between iterations.
A test case for fstests will follow up soon.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using a flag bit for exclusive operation, use a variable to
store which exclusive operation is being performed. Introduce an API
to start and finish an exclusive operation.
This would enable another way for tools to check which operation is
running on why starting an exclusive operation failed. The followup
patch adds a sysfs_notify() to alert userspace when the state changes, so
userspace can perform select() on it to get notified of the change.
This would enable us to enqueue a command which will wait for current
exclusive operation to complete before issuing the next exclusive
operation. This has been done synchronously as opposed to a background
process, or else error collection (if any) will become difficult.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Our current tree locking stuff allows us to recurse with read locks if
we're already holding the write lock. This is necessary for the space
cache inode, as we could be holding a lock on the root_tree root when we
need to cache a block group, and thus need to be able to read down the
root_tree to read in the inode cache.
We can get away with this in our current locking, but we won't be able
to with a rwsem. Handle this by purposefully annotating the places
where we require recursion, so that in the future we can maybe come up
with a way to avoid the recursion. In the case of the free space inode,
this will be superseded by the free space tree.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When quota is enabled for TEST_DEV, generic/013 sometimes fails like this:
generic/013 14s ... _check_dmesg: something found in dmesg (see xfstests-dev/results//generic/013.dmesg)
And with the following metadata leak:
BTRFS warning (device dm-3): qgroup 0/1370 has unreleased space, type 2 rsv 49152
------------[ cut here ]------------
WARNING: CPU: 2 PID: 47912 at fs/btrfs/disk-io.c:4078 close_ctree+0x1dc/0x323 [btrfs]
Call Trace:
btrfs_put_super+0x15/0x17 [btrfs]
generic_shutdown_super+0x72/0x110
kill_anon_super+0x18/0x30
btrfs_kill_super+0x17/0x30 [btrfs]
deactivate_locked_super+0x3b/0xa0
deactivate_super+0x40/0x50
cleanup_mnt+0x135/0x190
__cleanup_mnt+0x12/0x20
task_work_run+0x64/0xb0
__prepare_exit_to_usermode+0x1bc/0x1c0
__syscall_return_slowpath+0x47/0x230
do_syscall_64+0x64/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace a6cfd45ba80e4e06 ]---
BTRFS error (device dm-3): qgroup reserved space leaked
BTRFS info (device dm-3): disk space caching is enabled
BTRFS info (device dm-3): has skinny extents
[CAUSE]
The qgroup preallocated meta rsv operations of that offending root are:
btrfs_delayed_inode_reserve_metadata: rsv_meta_prealloc root=1370 num_bytes=131072
btrfs_delayed_inode_reserve_metadata: rsv_meta_prealloc root=1370 num_bytes=131072
btrfs_subvolume_reserve_metadata: rsv_meta_prealloc root=1370 num_bytes=49152
btrfs_delayed_inode_release_metadata: convert_meta_prealloc root=1370 num_bytes=-131072
btrfs_delayed_inode_release_metadata: convert_meta_prealloc root=1370 num_bytes=-131072
It's pretty obvious that, we reserve qgroup meta rsv in
btrfs_subvolume_reserve_metadata(), but doesn't have corresponding
release/convert calls in btrfs_subvolume_release_metadata().
This leads to the leakage.
[FIX]
To fix this bug, we should follow what we're doing in
btrfs_delalloc_reserve_metadata(), where we reserve qgroup space, and
add it to block_rsv->qgroup_rsv_reserved.
And free the qgroup reserved metadata space when releasing the
block_rsv.
To do this, we need to change the btrfs_subvolume_release_metadata() to
accept btrfs_root, and record the qgroup_to_release number, and call
btrfs_qgroup_convert_reserved_meta() for it.
Fixes: 733e03a0b2 ("btrfs: qgroup: Split meta rsv type into meta_prealloc and meta_pertrans")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana