This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.
Signed-off-by: Olof Johansson <olof@lixom.net>
Prior to this patch in optee_probe() when optee_enumerate_devices() was
called the struct optee was fully initialized. If
optee_enumerate_devices() returns an error optee_probe() is supposed to
clean up and free the struct optee completely, but will at this late
stage need to call optee_remove() instead. This isn't done and thus
freeing the struct optee prematurely.
With this patch the call to optee_enumerate_devices() is done after
optee_probe() has returned successfully and in case
optee_enumerate_devices() fails everything is cleaned up with a call to
optee_remove().
Fixes: c3fa24af92 ("tee: optee: add TEE bus device enumeration support")
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
In case of dynamic shared memory pool, kernel memory allocated using
dmabuf_mgr pool needs to be registered with OP-TEE prior to its usage
during optee_open_session() or optee_invoke_func().
So fix dmabuf_mgr pool allocations via an additional call to
optee_shm_register().
Also, allow kernel pages to be registered as shared memory with OP-TEE.
Fixes: 9733b072a1 ("optee: allow to work without static shared memory")
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The .ioctl and .compat_ioctl file operations have the same prototype so
they can both point to the same function, which works great almost all
the time when all the commands are compatible.
One exception is the s390 architecture, where a compat pointer is only
31 bit wide, and converting it into a 64-bit pointer requires calling
compat_ptr(). Most drivers here will never run in s390, but since we now
have a generic helper for it, it's easy enough to use it consistently.
I double-checked all these drivers to ensure that all ioctl arguments
are used as pointers or are ignored, but are not interpreted as integer
values.
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Darren Hart (VMware) <dvhart@infradead.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch is a part of a series that extends kernel ABI to allow to pass
tagged user pointers (with the top byte set to something else other than
0x00) as syscall arguments.
tee_shm_register()->optee_shm_unregister()->check_mem_type() uses provided
user pointers for vma lookups (via __check_mem_type()), which can only by
done with untagged pointers.
Untag user pointers in this function.
Link: http://lkml.kernel.org/r/4b993f33196b3566ac81285ff8453219e2079b45.1563904656.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the kernel is compiled with CONFIG_PREEMPT_VOLUNTARY and OP-TEE is
executing a long running workload, the following errors are raised:
[ 1705.971228] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 1705.977195] rcu: (detected by 0, t=2102 jiffies, g=51977, q=3)
[ 1705.983152] rcu: All QSes seen, last rcu_sched kthread activity 2102 (140596-138494), jiffies_till_next_fqs=1, root ->qsmask 0x0
[ 1705.994729] optee-xtest R running task 0 169 157 0x00000002
While OP-TEE is returning regularly to the kernel due to timer
interrupts, the OPTEE_SMC_FUNC_FOREIGN_INTR case does not contain an
explicit rescheduling point. Add a might_sleep() to the RPC request case
to ensure that the kernel can reschedule another task if OP-TEE requests
RPC handling.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Based on 1 normalized pattern(s):
this software is licensed under the terms of the gnu general public
license version 2 as published by the free software foundation and
may be copied distributed and modified under those terms this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 285 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
Among the larger pieces:
- Power management improvements for TI am335x and am437x (RTC suspend/wake)
- Misc new additions for Amlogic (socinfo updates)
- ZynqMP FPGA manager
- Nvidia improvements for reset/powergate handling
- PMIC wrapper for Mediatek MT8516
- Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers
-----BEGIN PGP SIGNATURE-----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=YSfu
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
Among the larger pieces:
- Power management improvements for TI am335x and am437x (RTC
suspend/wake)
- Misc new additions for Amlogic (socinfo updates)
- ZynqMP FPGA manager
- Nvidia improvements for reset/powergate handling
- PMIC wrapper for Mediatek MT8516
- Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
soc: aspeed: fix Kconfig
soc: add aspeed folder and misc drivers
spi: zynqmp: Fix build break
soc: imx: Add generic i.MX8 SoC driver
MAINTAINERS: Update email for Qualcomm SoC maintainer
memory: tegra: Fix a typos for "fdcdwr2" mc client
Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+"
memory: tegra: Replace readl-writel with mc_readl-mc_writel
memory: tegra: Fix integer overflow on tick value calculation
memory: tegra: Fix missed registers values latching
ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30
optee: allow to work without static shared memory
soc/tegra: pmc: Move powergate initialisation to probe
soc/tegra: pmc: Remove reset sysfs entries on error
soc/tegra: pmc: Fix reset sources and levels
soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A
soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask
fpga manager: Adding FPGA Manager support for Xilinx zynqmp
dt-bindings: fpga: Add bindings for ZynqMP fpga driver
firmware: xilinx: Add fpga API's
...
To facilitate additional options to get_user_pages_fast() change the
singular write parameter to be gup_flags.
This patch does not change any functionality. New functionality will
follow in subsequent patches.
Some of the get_user_pages_fast() call sites were unchanged because they
already passed FOLL_WRITE or 0 for the write parameter.
NOTE: It was suggested to change the ordering of the get_user_pages_fast()
arguments to ensure that callers were converted. This breaks the current
GUP call site convention of having the returned pages be the final
parameter. So the suggestion was rejected.
Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marshall <hubcap@omnibond.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=AE1r
-----END PGP SIGNATURE-----
Merge tag 'tee-optee-for-5.2' of http://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
Allow OP-TEE driver to work without static shared memory
* tag 'tee-optee-for-5.2' of http://git.linaro.org:/people/jens.wiklander/linux-tee:
optee: allow to work without static shared memory
Signed-off-by: Olof Johansson <olof@lixom.net>
On virtualized systems it is possible that OP-TEE will provide
only dynamic shared memory support. So it is fine to boot
without static SHM enabled if dymanic one is supported.
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
As usual, the drivers/tee and drivers/reset subsystems get merged
here, with the expected set of smaller updates and some new hardware
support. The tee subsystem now supports device drivers to be attached
to a tee, the first example here is a random number driver with its
implementation in the secure world.
Three new power domain drivers get added for specific chip families:
- Broadcom BCM283x chips (used in Raspberry Pi)
- Qualcomm Snapdragon phone chips
- Xilinx ZynqMP FPGA SoCs
One new driver is added to talk to the BPMP firmware on NVIDIA
Tegra210
Existing drivers are extended for new SoC variants from NXP,
NVIDIA, Amlogic and Qualcomm.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=+DOl
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, the drivers/tee and drivers/reset subsystems get merged
here, with the expected set of smaller updates and some new hardware
support. The tee subsystem now supports device drivers to be attached
to a tee, the first example here is a random number driver with its
implementation in the secure world.
Three new power domain drivers get added for specific chip families:
- Broadcom BCM283x chips (used in Raspberry Pi)
- Qualcomm Snapdragon phone chips
- Xilinx ZynqMP FPGA SoCs
One new driver is added to talk to the BPMP firmware on NVIDIA
Tegra210
Existing drivers are extended for new SoC variants from NXP, NVIDIA,
Amlogic and Qualcomm"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits)
tee: optee: update optee_msg.h and optee_smc.h to dual license
tee: add cancellation support to client interface
dpaa2-eth: configure the cache stashing amount on a queue
soc: fsl: dpio: configure cache stashing destination
soc: fsl: dpio: enable frame data cache stashing per software portal
soc: fsl: guts: make fsl_guts_get_svr() static
hwrng: make symbol 'optee_rng_id_table' static
tee: optee: Fix unsigned comparison with less than zero
hwrng: Fix unsigned comparison with less than zero
tee: fix possible error pointer ctx dereferencing
hwrng: optee: Initialize some structs using memset instead of braces
tee: optee: Initialize some structs using memset instead of braces
soc: fsl: dpio: fix memory leak of a struct qbman on error exit path
clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static
soc: qcom: llcc-slice: Fix typos
qcom: soc: llcc-slice: Consolidate some code
qcom: soc: llcc-slice: Clear the global drv_data pointer on error
drivers: soc: xilinx: Add ZynqMP power domain driver
firmware: xilinx: Add APIs to control node status/power
dt-bindings: power: Add ZynqMP power domain bindings
...
- dual license for optee_msg.h and optee_smc.h
Generic
- add cancellation support to client interface
-----BEGIN PGP SIGNATURE-----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=h0Es
-----END PGP SIGNATURE-----
Merge tag 'tee-misc-for-v5.1' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
OP-TEE driver
- dual license for optee_msg.h and optee_smc.h
Generic
- add cancellation support to client interface
* tag 'tee-misc-for-v5.1' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: update optee_msg.h and optee_smc.h to dual license
tee: add cancellation support to client interface
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support of cancellation request to the TEE kernel internal
client interface. Can be used by software TPM drivers, that leverage
TEE under the hood (for instance TPM2.0 mobile profile), for requesting
cancellation of time-consuming operations (RSA key-pair generation etc.).
Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Add an of_node_put when a tested device node is not available.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@
e = f(...);
... when != of_node_put(e)
when != x = e
when != e = x
when any
if (<+...of_device_is_available(e)...+>) {
... when != of_node_put(e)
(
return e;
|
+ of_node_put(e);
return ...;
)
}
// </smpl>
Fixes: db878f76b9 ("tee: optee: take DT status property into account")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The return from the call to tee_client_invoke_func can be a
negative error code however this is being assigned to an
unsigned variable 'ret' hence the check is always false.
Fix this by making 'ret' an int.
Detected by Coccinelle ("Unsigned expression compared with zero:
ret < 0")
Fixes: c3fa24af92 ("tee: optee: add TEE bus device enumeration support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add check for valid ctx pointer and then only dereference ctx to
configure supp_nowait flag.
Fixes: 42bf4152d8 ("tee: add supp_nowait flag in tee_context struct")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Clang warns:
drivers/tee/optee/device.c:39:31: warning: suggest braces around
initialization of subobject [-Wmissing-braces]
struct tee_param param[4] = {0};
^
{}
drivers/tee/optee/device.c:92:48: warning: suggest braces around
initialization of subobject [-Wmissing-braces]
struct tee_ioctl_open_session_arg sess_arg = {0};
^
{}
2 warnings generated.
One way to fix these warnings is to add additional braces like Clang
suggests; however, there has been a bit of push back from some
maintainers, who just prefer memset as it is unambiguous, doesn't
depend on a particular compiler version, and properly initializes all
subobjects [1][2]. Do that here so there are no more warnings.
[1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/
[2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/
Fixes: c3fa24af92 ("tee: optee: add TEE bus device enumeration support")
Link: https://github.com/ClangBuiltLinux/linux/issues/370
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
OP-TEE provides a pseudo TA to enumerate TAs which can act as devices/
services for TEE bus. So implement device enumeration using invoke
function: PTA_CMD_GET_DEVICES provided by pseudo TA to fetch array of
device UUIDs. Also register these enumerated devices with TEE bus as
"optee-clntX" device.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
[jw: fix optee_enumerate_devices() with no devices found]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Introduce a generic TEE bus driver concept for TEE based kernel drivers
which would like to communicate with TEE based devices/services. Also
add support in module device table for these new TEE based devices.
In this TEE bus concept, devices/services are identified via Universally
Unique Identifier (UUID) and drivers register a table of device UUIDs
which they can support.
So this TEE bus framework registers following apis:
- match(): Iterates over the driver UUID table to find a corresponding
match for device UUID. If a match is found, then this particular device
is probed via corresponding probe api registered by the driver. This
process happens whenever a device or a driver is registered with TEE
bus.
- uevent(): Notifies user-space (udev) whenever a new device is registered
on this bus for auto-loading of modularized drivers.
Also this framework allows for device enumeration to be specific to
corresponding TEE implementation like OP-TEE etc.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
This flag indicates that requests in this context should not wait for
tee-supplicant daemon to be started if not present and just return
with an error code. It is needed for requests which should be
non-blocking in nature like ones arising from TEE based kernel drivers
or any in kernel api that uses TEE internal client interface.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Adds a log message in the OP-TEE driver to inform that dynamic shared
memory is enabled.
-----BEGIN PGP SIGNATURE-----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=NJ/O
-----END PGP SIGNATURE-----
Merge tag 'tee-subsys-optee-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/late
OP-TEE dynamic shm log message
Adds a log message in the OP-TEE driver to inform that dynamic shared
memory is enabled.
* tag 'tee-subsys-optee-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: log message if dynamic shm is enabled
Signed-off-by: Olof Johansson <olof@lixom.net>
When dynamic shared memory support is enabled in the OP-TEE Trusted
OS, it doesn't mean that the driver supports it, which can confuse
users during debugging. Log a message when dynamic shared memory is
enabled in the driver, to let users know for sure.
Suggested-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
This bug occurs when:
- a new request arrives, one thread(let's call it A) is pending in
optee_supp_req() with req->busy is initial value false.
- tee-supplicant is killed, then optee_supp_release() is called, this
function calls list_del(&req->link), and set supp->ctx to NULL. And
it also wake up process A.
- process A continues, it firstly checks supp->ctx which is NULL,
then checks req->busy which is false, at last run list_del(&req->link).
This triggers double list_del() and results kernel panic.
For solve this problem, we rename req->busy to req->in_queue, and
associate it with state of whether req is linked to supp->reqs. So we
can just only check req->in_queue to make decision calling list_del()
or not.
Signed-off-by: Zhizhou Zhang <zhizhouzhang@asrmicro.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
* Adds a kernel internal tee client interface allowing other drivers
etc to access a TEE
* OP-TEE driver takes DT status property into account
-----BEGIN PGP SIGNATURE-----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=E7jv
-----END PGP SIGNATURE-----
Merge tag 'tee-drv-for-4.20' of git://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers
Misc enhancement for tee driver subsystem
* Adds a kernel internal tee client interface allowing other drivers
etc to access a TEE
* OP-TEE driver takes DT status property into account
* tag 'tee-drv-for-4.20' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee: add kernel internal client interface
tee: optee: take DT status property into account
Signed-off-by: Olof Johansson <olof@lixom.net>
Adds a kernel internal TEE client interface to be used by other drivers.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
DT nodes may have a 'status' property which, if set to anything other
than 'ok' or 'okay', indicates to the OS that the DT node should be
treated as if it was not present. So add that missing logic to the
OP-TEE driver.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Some of the larger changes this merge window:
- Removal of drivers for Exynos5440, a Samsung SoC that never saw
widespread use.
- Uniphier support for USB3 and SPI reset handling
- Syste control and SRAM drivers and bindings for Allwinner platforms
- Qualcomm AOSS (Always-on subsystem) reset controller drivers
- Raspberry Pi hwmon driver for voltage
- Mediatek pwrap (pmic) support for MT6797 SoC
-----BEGIN PGP SIGNATURE-----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=ZjwY
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Some of the larger changes this merge window:
- Removal of drivers for Exynos5440, a Samsung SoC that never saw
widespread use.
- Uniphier support for USB3 and SPI reset handling
- Syste control and SRAM drivers and bindings for Allwinner platforms
- Qualcomm AOSS (Always-on subsystem) reset controller drivers
- Raspberry Pi hwmon driver for voltage
- Mediatek pwrap (pmic) support for MT6797 SoC"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits)
drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
soc: fsl: cleanup Kconfig menu
soc: fsl: dpio: Convert DPIO documentation to .rst
staging: fsl-mc: Remove remaining files
staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
staging: fsl-dpaa2: eth: move generic FD defines to DPIO
soc: fsl: qe: gpio: Add qe_gpio_set_multiple
usb: host: exynos: Remove support for Exynos5440
clk: samsung: Remove support for Exynos5440
soc: sunxi: Add the A13, A23 and H3 system control compatibles
reset: uniphier: add reset control support for SPI
cpufreq: exynos: Remove support for Exynos5440
ata: ahci-platform: Remove support for Exynos5440
soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata
soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs
soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs
soc: mediatek: pwrap: fix cipher init setting error
dt-bindings: pwrap: mediatek: add pwrap support for MT6797
reset: uniphier: add USB3 core reset control
dt-bindings: reset: uniphier: add USB3 core reset support
...
Neither used nor correctly implemented anywhere. Just completely remove
the interface.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/226645/
This change adds KCONFIG option to set number of pages out of
whole shared memory to be used for OP-TEE driver private data
structures.
Signed-off-by: Sahil Malhotra <sahil.malhotra@nxp.com>
[jw: fixing trivial merge conflict]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The two do the same thing, but we want to have a consistent
naming in the kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
This change prevents userland from referencing TEE shared memory
outside the area initially allocated by its owner. Prior this change an
application could not reference or access memory it did not own but
it could reference memory not explicitly allocated by owner but still
allocated to the owner due to the memory allocation granule.
Reported-by: Alexandre Jutras <alexandre.jutras@nxp.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Bump the file's refcount before moving the reference into the fd table,
not afterwards. The old code could drop the file's refcount to zero for a
short moment before calling get_file() via get_dma_buf().
This code can only be triggered on ARM systems that use Linaro's OP-TEE.
Fixes: 967c9cca2c ("tee: generic TEE subsystem")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
When the driver initializes, report the following information
about the OP-TEE OS:
- major and minor version,
- build identifier (if available).
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Matthias Brugger <mbruger@suse.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
In the OPTEE_SMC_CALL_GET_OS_REVISION request, the previously reserved
parameter a2 is now documented as being an optional build identifier
(such as an SCM revision or commit ID, for instance).
A new structure optee_smc_call_get_os_revision_result is introduced to
be used when querying the secure OS version, instead of re-using the
struct defined for OPTEE_SMC_CALLS_REVISION.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Matthias Brugger <mbruger@suse.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The privileged dev id range is [TEE_NUM_DEVICES / 2, TEE_NUM_DEVICES).
The non-privileged dev id range is [0, TEE_NUM_DEVICES / 2).
So when finding a slot for them, need to use different max value.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
request with five new patches fixing review comments and errors.
Apart from three small fixes there's two larger patches that in the end
checks that memory to be registered really is normal cached memory.
-----BEGIN PGP SIGNATURE-----
iQI3BAABCgAhBQJaVzZeGhxqZW5zLndpa2xhbmRlckBsaW5hcm8ub3JnAAoJELWw
uEGXj+zTbVMQAOK22g34O1EouTBpFvw/Ch4aZ7AFr+NoXxyphhIeg/4RpWwCpiCY
+xDBv4aHk6Opv0uhWGJJHMzRgE6eNYjLVVd8tGpDtRdqQWJP0MYVH2sHu5bnfJZS
LfDUk+t2ULxgzVvIBvyccslTSAGqc5K0mnzW3DXrwkKtRmpfl27tg/OFph08lHni
dhAOeW4m6PGWcWlQklDlpykTt8KUHMaIx5eNx+IBCYDcfQkev3Te49EwDK05ObjU
MC6M1rZJmzb28UumkUC1B8nyS/PqxB8xrkyqYqehic6eBH9WIAn+paaLgSjocvqc
gXwScaTNyniUPBMR73sNyARzpYgI0CvcqJ9R0uIGlSmwj9LQqrc0vtiJAR0YDeir
FzweH8uhkU2qhZjH3WSoLGS4CSm2scIhEE3jbHpRjDdqvajoQBbOxPKusQnIjs/p
iDZwYKuvH2f7TQtdwigT36k7KP0688LRSUrp7CeY7sIlzj0M3CLEzU/5OORBgqIl
5KyOt6R8aVbQtABDBnzqIn1BYqA05KWzZFqwlDPckCNfBjgHd45rz4HGvwqCf9JI
dKZ3VZDtBOeQIpBRj02mbEn0mUhDyztd7we+WkzTz0AxmEAw8r8yn1035WhZILGw
ntXMk4PX9uVwQxReE0n1Gyv5UxCP1u+RMGE7G3hQoDBGNdhGxHw9bDqV
=0+NS
-----END PGP SIGNATURE-----
Merge tag 'tee-drv-dynamic-shm+fixes-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers
This pull request updates the previous tee-drv-dynamic-shm-for-v4.16 pull
request with five new patches fixing review comments and errors.
Apart from three small fixes there's two larger patches that in the end
checks that memory to be registered really is normal cached memory.
* tag 'tee-drv-dynamic-shm+fixes-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: shm: Potential NULL dereference calling tee_shm_register()
tee: shm: don't put_page on null shm->pages
tee: shm: make function __tee_shm_alloc static
tee: optee: check type of registered shared memory
tee: add start argument to shm_register callback
Signed-off-by: Olof Johansson <olof@lixom.net>
get_user_pages_fast() can return zero in certain error paths. We should
handle that or else it means we accidentally return ERR_PTR(0) which is
NULL instead of an error pointer. The callers are not expecting that
and will crash with a NULL dereference.
Fixes: 033ddf12bc ("tee: add register user memory")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
In the case that shm->pages fails to allocate, the current exit
error path will try to put_page on a null shm->pages and cause
a null pointer dereference when accessing shm->pages[n]. Fix this
by only performing the put_page and kfree on shm->pages if it
is not null.
Detected by CoverityScan, CID#1463283 ("Dereference after null check")
Fixes: 033ddf12bc ("tee: add register user memory")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The function __tee_shm_alloc is local to the source and does
not need to be in global scope, so make it static.
Cleans up sparse warning:
symbol '__tee_shm_alloc' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Checks the memory type of the pages to be registered as shared memory.
Only normal cached memory is allowed.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Adds a start argument to the shm_register callback to allow the callback
to check memory type of the passed pages.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The optee driver includes the header files in an unusual order,
with asm/pgtable.h before the linux/*.h headers. For some reason
this seems to trigger a build failure:
drivers/tee/optee/call.c: In function 'optee_fill_pages_list':
include/asm-generic/memory_model.h:64:14: error: implicit declaration of function 'page_to_section'; did you mean '__nr_to_section'? [-Werror=implicit-function-declaration]
int __sec = page_to_section(__pg); \
drivers/tee/optee/call.c:494:15: note: in expansion of macro 'page_to_phys'
optee_page = page_to_phys(*pages) +
Let's just include linux/mm.h, which will then get the other
header implicitly.
Fixes: 3bb48ba5cd ("tee: optee: add page list manipulation functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
subsystem as a whole and in OP-TEE in particular.
Global Platform TEE specification [1] allows client applications
to register part of own memory as a shared buffer between
application and TEE. This allows fast zero-copy communication between
TEE and REE. But current implementation of TEE in Linux does not support
this feature.
Also, current implementation of OP-TEE transport uses fixed size
pre-shared buffer for all communications with OP-TEE OS. This is okay
in the most use cases. But this prevents use of OP-TEE in virtualized
environments, because:
a) We can't share the same buffer between different virtual machines
b) Physically contiguous memory as seen by VM can be non-contiguous
in reality (and as seen by OP-TEE OS) due to second stage of
MMU translation.
c) Size of this pre-shared buffer is limited.
So, first part of this pull request adds generic register/unregister
interface to tee subsystem. The second part adds necessary features into
OP-TEE driver, so it can use not only static pre-shared buffer, but
whole RAM to communicate with OP-TEE OS.
This change is backwards compatible allowing older secure world or
user space to work with newer kernels and vice versa.
[1] https://www.globalplatform.org/specificationsdevice.asp
-----BEGIN PGP SIGNATURE-----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=3iwl
-----END PGP SIGNATURE-----
Merge tag 'tee-drv-dynamic-shm-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers
Pull "tee dynamic shm for v4.16" from Jens Wiklander:
This pull request enables dynamic shared memory support in the TEE
subsystem as a whole and in OP-TEE in particular.
Global Platform TEE specification [1] allows client applications
to register part of own memory as a shared buffer between
application and TEE. This allows fast zero-copy communication between
TEE and REE. But current implementation of TEE in Linux does not support
this feature.
Also, current implementation of OP-TEE transport uses fixed size
pre-shared buffer for all communications with OP-TEE OS. This is okay
in the most use cases. But this prevents use of OP-TEE in virtualized
environments, because:
a) We can't share the same buffer between different virtual machines
b) Physically contiguous memory as seen by VM can be non-contiguous
in reality (and as seen by OP-TEE OS) due to second stage of
MMU translation.
c) Size of this pre-shared buffer is limited.
So, first part of this pull request adds generic register/unregister
interface to tee subsystem. The second part adds necessary features into
OP-TEE driver, so it can use not only static pre-shared buffer, but
whole RAM to communicate with OP-TEE OS.
This change is backwards compatible allowing older secure world or
user space to work with newer kernels and vice versa.
[1] https://www.globalplatform.org/specificationsdevice.asp
* tag 'tee-drv-dynamic-shm-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: shm: inline tee_shm_get_id()
tee: use reference counting for tee_context
tee: optee: enable dynamic SHM support
tee: optee: add optee-specific shared pool implementation
tee: optee: store OP-TEE capabilities in private data
tee: optee: add registered buffers handling into RPC calls
tee: optee: add registered shared parameters handling
tee: optee: add shared buffer registration functions
tee: optee: add page list manipulation functions
tee: optee: Update protocol definitions
tee: shm: add page accessor functions
tee: shm: add accessors for buffer size and page offset
tee: add register user memory
tee: flexible shared memory pool creation
This pull request enables asynchronous communication with TEE supplicant
by introducing meta parameters in the user space API. The meta
parameters can be used to tag requests with an id that can be matched
against an asynchronous response as is done here in the OP-TEE driver.
Asynchronous supplicant communication is needed by OP-TEE to implement
GlobalPlatforms TEE Sockets API Specification v1.0.1. The specification
is available at https://www.globalplatform.org/specificationsdevice.asp.
This change is backwards compatible allowing older supplicants to work
with newer kernels and vice versa.
-----BEGIN PGP SIGNATURE-----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=jsDo
-----END PGP SIGNATURE-----
Merge tag 'tee-drv-async-supplicant-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers
Pull "Enable async communication with tee supplicant" from Jens Wiklander:
This pull request enables asynchronous communication with TEE supplicant
by introducing meta parameters in the user space API. The meta
parameters can be used to tag requests with an id that can be matched
against an asynchronous response as is done here in the OP-TEE driver.
Asynchronous supplicant communication is needed by OP-TEE to implement
GlobalPlatforms TEE Sockets API Specification v1.0.1. The specification
is available at https://www.globalplatform.org/specificationsdevice.asp.
This change is backwards compatible allowing older supplicants to work
with newer kernels and vice versa.
* tag 'tee-drv-async-supplicant-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: support asynchronous supplicant requests
tee: add TEE_IOCTL_PARAM_ATTR_META
tee: add tee_param_is_memref() for driver use
Now, when struct tee_shm is defined in public header,
we can inline small getter functions like this one.
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
We need to ensure that tee_context is present until last
shared buffer will be freed.
Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Olof Johansson