Commit Graph

79 Commits

Author SHA1 Message Date
Takashi Sakamoto 3fd80b2003 ALSA: firewire-motu: use the same size of period for PCM substream in AMDTP streams
In current implementation, when opening a PCM substream, it's needed to
check whether the opposite PCM substream runs. This is to assign
effectual constraints (e.g. sampling rate) to opened PCM substream.

The number of PCM substreams and MIDI substreams on AMDTP streams in
domain is recorded in own structure. Usage of this count is an
alternative of the above check. This is better because the count is
incremented in pcm.hw_params earlier than pcm.trigger.

This idea has one issue because it's incremented for MIDI substreams as
well. In current implementation, for a case that any MIDI substream run
and a PCM substream is going to start, PCM application to start the PCM
substream can decide hardware parameters by restart packet streaming.
Just checking the substream count can brings regression.

Now AMDTP domain structure has a member for the size of PCM period in
PCM substream which starts AMDTP streams in domain. When the value has
zero and the substream count is greater than 1, it means that any MIDI
substream starts AMDTP streams in domain. Usage of the value can resolve
the above issue.

This commit replaces the check with the substream count and the value for
the size of PCM period.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-17-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-17 12:02:46 +02:00
Takashi Sakamoto 0d39cd0e44 ALSA: firewire-motu: register the size of PCM period to AMDTP domain
This commit is a preparation to share the size of PCM period between
PCM substreams on AMDTP streams in the same domain. At this time,
the size of PCM period in PCM substream which starts AMDTP streams in the
same domain is recorded.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191007110532.30270-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-17 12:02:43 +02:00
Takashi Sakamoto 6af86bdb8a ALSA: firewire-motu: add support for MOTU 4pre
MOTU 4pre was launched in 2012 by MOTU, Inc. This commit allows userspace
applications can transmit and receive PCM frames and MIDI messages for
this model via ALSA PCM interface and RawMidi/Sequencer interfaces.

The device supports MOTU protocol version 3. Unlike the other devices, the
device is simply designed. The size of data block is fixed to 10 quadlets
during available sampling rates (44.1 - 96.0 kHz). Each data block
includes 1 source packet header, 2 data chunks for messages, 8 data chunks
for PCM samples and 2 data chunks for padding to quadlet alignment. The
device has no MIDI, optical, BNC and AES/EBU interfaces.

Like support for the other MOTU devices, the quality of playback sound
is not enough good with periodical noise yet.

$ python2 crpp < ~/git/am-config-rom/motu/motu-4pre.img
               ROM header and bus information block
               -----------------------------------------------------------------
400  041078cc  bus_info_length 4, crc_length 16, crc 30924
404  31333934  bus_name "1394"
408  20ff7000  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
40c  0001f200  company_id 0001f2     |
410  000a41c5  device_id 00000a41c5  | EUI-64 0001f200000a41c5

               root directory
               -----------------------------------------------------------------
414  0004ef04  directory_length 4, crc 61188
418  030001f2  vendor
41c  0c0083c0  node capabilities per IEEE 1394
420  d1000002  --> unit directory at 428
424  8d000005  --> eui-64 leaf at 438

               unit directory at 428
               -----------------------------------------------------------------
428  0003ceda  directory_length 3, crc 52954
42c  120001f2  specifier id
430  13000045  version
434  17103800  model

               eui-64 leaf at 438
               -----------------------------------------------------------------
438  0002d248  leaf_length 2, crc 53832
43c  0001f200  company_id 0001f2     |
440  000a41c5  device_id 00000a41c5  | EUI-64 0001f200000a41c5

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-30 07:34:28 +02:00
Takashi Sakamoto ccc6c1b0e6 ALSA: firewire-motu: support AMDTP domain
This commit adds AMDTP domain support for ALSA firewire-motu driver.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-05 19:57:28 +02:00
Takashi Sakamoto 39e522a5a4 ALSA: firewire-motu: code refactoring for initialization/destruction of AMDTP stream
This commit is a preparation to support AMDTP domain.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-05 19:57:22 +02:00
Takashi Sakamoto d2d5a6b025 ALSA: firewire-motu: more code refactoring for MOTU data block processing layer
MOTU data block processing layer has some tracepoints events. This
commit is code refactoring to split probing the events from processing
data blocks.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-22 16:05:13 +02:00
Takashi Sakamoto 9a738ad1b1 ALSA: firewire-lib: process payload of isoc context according to packet descriptors
This commit changes each of data block processing layer so that it
receives list of packet descriptor.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-22 16:05:11 +02:00
Takashi Sakamoto 00d004db64 ALSA: firewire-motu: code refactoring for MOTU data block processing layer
This is code refactoring for MOTU data block processing layer so that
it can receive list of packet descriptor.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-22 16:05:10 +02:00
Takashi Sakamoto d2c104a342 ALSA: firewire-lib: pass packet descriptor to data block processing layer
This commit changes signature of callback function to call data block
processing layer with packet descriptor. At present, the layer is called
per packet.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-22 16:05:06 +02:00
Takashi Sakamoto 600c8018df ALSA: firewire-lib: pass no syt information to data block processing layer
In a previous commit, the variable passed from packet streaming layer
for syt variable is useless. This commit obsoletes it.

In my future work, the syt information is passed to data block processing
layer by another way.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-22 16:05:01 +02:00
Takashi Sakamoto 3baf30532f ALSA: firewire-lib: add syt_override member for some protocols
Some protocols don't use syt field of CIP header to represent
presentation timestamp. For such protocol, ALSA IEC 61883-1/6
packet streaming engine uses a pointer into local variable for
the value of syt to call data block processing layer. However,
it can decide the value when initializing packet streaming
layer.

This commit adds 'syt_override' member for packet streaming
layer.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-22 16:05:00 +02:00
Takashi Sakamoto ab75481202 ALSA: firewire-lib: pass data block counter to data block processing layer
This is a preparation for future commit that 'struct
amdtp_stream.data_block_count' does not represent the value of
data block count for current data block.

However, data block count is required for calculation of sequence index
in sequence-multiplied data channel. Some of data block processing layer
require it; e.g. for AM824 data block.

This commit passes data block count to the processing layer.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-22 16:04:57 +02:00
Takashi Iwai 3c53c6255d ASoC: Updates for v5.3
This is a very big update, mainly thanks to Morimoto-san's refactoring
 work and some fairly large new drivers.
 
  - Lots more work on moving towards a component based framework from
    Morimoto-san.
  - Support for force disconnecting muxes from Jerome Brunet.
  - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
    CX2072X, Realtek RT1011 and RT1308.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0jGwUTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0LD4B/9AkutfS+vznOrk0V0wFb2SUfjwE4Pr
 +z/kAehohAOl/7pg9Dun/lmZYBWMyOM2aYmK81ahEo2DfO+uzwkwjCaXFjGVGwEK
 j7XpWkrIjKnou/z1FeALgVvt+crzdy5iNWC04AbKaP2WHCcI7zvPQIsBta/V0OJt
 lg+j0J7pagnTMcgV1+qJdaASmofy/hpoZ79Gv0PIfGC8hpJ/3mBgcNPCLQrJtD4R
 v+tzvCZNrZVqCanwLf3vouEm1bpWYOpI+Wdmu4u6rY7MhmCj72EJ2zyfdm/qtaxF
 e7whgCyOQFkWe7NgDn0G08aAT6LsaxOtPNr7H8tL8S8sw8425fqeOouV
 =n/HQ
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.3

This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.

 - Lots more work on moving towards a component based framework from
   Morimoto-san.
 - Support for force disconnecting muxes from Jerome Brunet.
 - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
   CX2072X, Realtek RT1011 and RT1308.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-08 14:45:34 +02:00
Takashi Sakamoto ba18ca2b8e firewire-motu: fix wrong reference count for stream functionality at error path of rawmidi interface
In IEC 61883-6, several types of sampling data can be multiplexed into
payload of common isochronous packet (CIP). For typical audio and music
units, PCM samples and MIDI messages are multiplexed into one packet
streaming.

ALSA firewire-motu driver allows applications of rawmidi interface to
start packet streaming for transmission of MIDI messages. However at
error path, the reference count of stream functionality is not operated
correctly. This can brings a bug that packet streaming is not stopped
when all referrers release the count.

This commit fixes the bug.

Fixes: 8edc56ec8f ("ALSA: firewire-motu: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-07 11:19:58 +02:00
Takashi Iwai b5c21c8470 Merge branch 'for-linus' into for-next
This back-merge is necessary for adjusting the latest FireWire fix
with the recent refactoring in 5.3 development branch.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-01 17:01:55 +02:00
Takashi Sakamoto c5dfd4b885 ALSA: firewire-motu: unify common tracepoints for both direction
In ALSA firewire-motu driver, some tracepoints are supported to probe
vendor-specific data fields for SPH and status/control messages in
payload of isochronous packet. At present, the events of tracepoints
are unique each of direction, however the pair of events has the
same structure and print format. It's possible to unify the pair.

This commit unifies the pair. From userspace, direction is specified
by filtering for src/dst fields in the structure.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-24 12:10:52 +02:00
Takashi Sakamoto eccd895c99 ALSA: firewire-motu: unify stop and release method for duplex streams
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-21 11:47:02 +02:00
Takashi Sakamoto 15d472ecc5 ALSA: firewire-motu: code refactoring for pcm.hw_params/hw_free callbacks
The pairs of pcm.hw_params callbacks and .hw_free callbacks for both
direction have no differences.

This commit unifies the pairs.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-18 08:45:32 +02:00
Takashi Sakamoto 2d103420c6 ALSA: firewire-motu: update isochronous resources when starting packet streaming after bus-reset
After bus reset, isochronous resource manager releases all of allocated
isochronous resources. The nodes to transfer isochronous packet should
request reallocation of the resources.

However, between the bus-reset and invocation of 'struct fw_driver.update'
handler, ALSA PCM application can detect this situation by XRUN because
the target device cancelled to transmit packets once bus-reset occurs.

Due to the above mechanism, ALSA fireface driver just stops packet
streaming in the update handler, thus pcm.prepare handler should
request the reallocation.

This commit requests the reallocation in pcm.prepare callback when
bus generation is changed.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-18 08:45:32 +02:00
Takashi Sakamoto 8edc56ec8f ALSA: firewire-motu: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks
Once allocated, isochronous resources are available for packet
streaming, even if the streaming is cancelled. For this reason,
current implementation handles allocation of the resources and
starting packet streaming at the same time. However, this brings
complicated procedure to start packet streaming.

This commit separates the allocation and starting. The allocation is
done in pcm.hw_params callback and available till pcm.hw_free callback.
Even if any XRUN occurs, pcm.prepare callback is done to restart
packet streaming without releasing/allocating the resources.

There are two points to stop packet streaming; in pcm.hw_params and
pcm.prepare callbacks. The former point is a case that packet streaming
is already started for any MIDI substream then packet streaming is
requested with different sampling transfer frequency for any PCM
substream. The latter point is cases of any XRUN or packet queueing
error.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-18 08:45:31 +02:00
Takashi Sakamoto ec694fba2a ALSA: firewire-motu: code refactoring to finish streaming session
The operation to finish packet streaming includes stopping isochronous
contexts. This commit merges it to the helper function.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-18 08:45:30 +02:00
Takashi Sakamoto e63a15185a ALSA: firewire-motu: minor code refactoring to stop isochronous context
The helper function to stop isochronous context is superfluous. This
commit removes it with simpler codes.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-18 08:45:30 +02:00
Takashi Sakamoto b66ab1428e ALSA: firewire-motu: rename helper functions to begin/finish streaming session
Like the other drivers in ALSA firewire stack, this commit renames
functions to begin/finish packet streaming.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-18 08:45:29 +02:00
Takashi Sakamoto fc49769af4 ALSA: firewire-motu: code refactoring for condition to stop streaming
In snd_motu_stream_start_duplex() function, there're two points to stop
packet streaming, however they can be merged.  This commit merges them.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-18 08:45:28 +02:00
Takashi Sakamoto 8350132e39 ALSA: firewire-motu: add helper function to keep isochronous resources
This commit is a part of preparation to perform allocation/release
of isochronous resources in pcm.hw_params/hw_free callbacks.

This commit adds a helper function to allocate isochronous resources.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-18 08:45:28 +02:00
Takashi Sakamoto f6341db65a ALSA: firewire-motu: unify midi callback function
Two sets of callbacks for rawmidi.open/close but they have the same
codes. This commit unifies each of the callbacks.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-18 08:45:27 +02:00
Takashi Sakamoto 18f26034be ALSA: firewire-motu: unify the count of subscriber for packet streaming
Two counters are used to maintain isochronous packet streaming for both
directions. However, like the other drivers, they can be replaced with
one counter. This commit unifies them.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-18 08:45:26 +02:00
Linus Torvalds bcb46a0e0e sound fixes for 5.2-rc5
you might feel like a deja vu to receive a bulk of changes at rc5,
 and it happens again; we've got a collection of fixes for ASoC.
 Most of fixes are targeted for the newly merged SOF (Sound Open
 Firmware) stuff and the relevant fixes for Intel platforms.
 
 Other than that, there are a few regression fixes for the recent
 ASoC core changes and HD-audio quirk, as well as a couple of
 FireWire fixes and for other ASoC codecs.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl0DY4YOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE/X9BAAzLc3OXBQhnQfFGvAmW8ro/bRuhwg3KjptwNe
 Zd/y6V4ru2Lhuqbr+EZMZqu665EkTg1CpHydMwsmD7bbmi47Xet7ocufjQMgHKcX
 l+QVRvzB+Ve5ARdUww8B6jqoc7CvZiM/tcW9VP3kphXOD4/iY1VcnRbVzHGYrAgI
 drLCnlC91Z5ssWPmAjuju6vZUwqCQupALs0wtdRFnwRonz0sCcPKjKzPAoS6KVQS
 6kzRW3nLqKMpatbXdaSjb5tdVxRax8042sqaCqppvE1ToxvkbvSZykOwLQGDdCDn
 zkHUv+hmS76IV2Q4baCkAl4fkborKOJXgNQnoxQ5VDbOzBbOMy6867jQ+Y3gEx8k
 UqGpS2AA46c3pQcUvos0KqqHaSe3ESP2sH02k0BWWpmnyo927MAYE7qm80BnqjmJ
 emXXs0I5u5MkUBb00jP2QpvZqhoKzRLD84BWuHSlg5gIDCQ1cn1WIQaq8YIT4+Bf
 V50QUZMPI3PIw1g81XYLZXbhT/0b3zurOOhwEChPyJdz1ZoIyEeGMxt1rsZWD64B
 qn24AzRfIQTDteIYUmYovUtzZeFcAqQDsbtLQa98BzDHAYhvJEc+1bbT/NYgtv7/
 zJqeFX9CbOcDihmiThvZKVAfThQeUCSWFBXk5JgBxs19uUa4et7XCHbXmPeyBJiq
 gF2xAhs=
 =9U0L
 -----END PGP SIGNATURE-----

Merge tag 'sound-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "It might feel like deja vu to receive a bulk of changes at rc5, and it
  happens again; we've got a collection of fixes for ASoC. Most of fixes
  are targeted for the newly merged SOF (Sound Open Firmware) stuff and
  the relevant fixes for Intel platforms.

  Other than that, there are a few regression fixes for the recent ASoC
  core changes and HD-audio quirk, as well as a couple of FireWire fixes
  and for other ASoC codecs"

* tag 'sound-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (54 commits)
  Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops"
  ALSA: ice1712: Check correct return value to snd_i2c_sendbytes (EWS/DMX 6Fire)
  ALSA: oxfw: allow PCM capture for Stanton SCS.1m
  ALSA: firewire-motu: fix destruction of data for isochronous resources
  ASoC: Intel: sst: fix kmalloc call with wrong flags
  ASoC: core: Fix deadlock in snd_soc_instantiate_card()
  SoC: rt274: Fix internal jack assignment in set_jack callback
  ALSA: hdac: fix memory release for SST and SOF drivers
  ASoC: SOF: Intel: hda: use the defined ppcap functions
  ASoC: core: move DAI pre-links initiation to snd_soc_instantiate_card
  ASoC: Intel: cht_bsw_rt5672: fix kernel oops with platform_name override
  ASoC: Intel: cht_bsw_nau8824: fix kernel oops with platform_name override
  ASoC: Intel: bytcht_es8316: fix kernel oops with platform_name override
  ASoC: Intel: cht_bsw_max98090: fix kernel oops with platform_name override
  ASoC: sun4i-i2s: Add offset to RX channel select
  ASoC: sun4i-i2s: Fix sun8i tx channel offset mask
  ASoC: max98090: remove 24-bit format support if RJ is 0
  ASoC: da7219: Fix build error without CONFIG_I2C
  ASoC: SOF: Intel: hda: Fix COMPILE_TEST build error
  ASoC: SOF: fix DSP oops definitions in FW ABI
  ...
2019-06-14 05:37:06 -10:00
Takashi Sakamoto 0e3fb6995b ALSA: firewire-motu: fix destruction of data for isochronous resources
The data for isochronous resources is not destroyed in expected place.
This commit fixes the bug.

Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 9b2bb4f2f4 ("ALSA: firewire-motu: add stream management functionality")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-11 11:34:04 +02:00
Thomas Gleixner da607e1969 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 345
Based on 1 normalized pattern(s):

  licensed under the terms of the gnu general public license version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 88 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000437.521539229@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:08 +02:00
Takashi Sakamoto d3d10a4a1b ALSA: firewire-lib: use union for directional parameters
Some parameters of struct amdtp_stream is dependent on direction.

This commit uses union for such parameters to distinguish from
common parameters.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-05-22 12:28:00 +02:00
Takashi Sakamoto 35033d8cb7 ALSA: firewire-motu: add support MOTU 8pre FireWire
This commit adds support for MOTU 8pre FireWire, which was shipped 2007
and nowadays already discontinued. Userspace applications can transmit
and receive PCM frames and MIDI messages for this model via ALSA PCM
interface and RawMidi/Sequencer interfaces.

Like the other models of MOTU FireWire series, this model has many
quirks in its CIP.

At first, data channels for two pairs of optical interfaces. At lower
sampling transmission frequency, i.e. 44.1 and 48.0 kHz, one pair is
available for ADAT data, thus 8 data chunks are transferred by CIP.
At middle sampling transmission frequency, i.e.  88.2 and 96.0 kHz,
two pairs are available to keep 8 chunks for ADAT data, thus CIP
still includes 8 data chunks.

Apart from data chunks for optical interface, CIP includes fixed number
of data chunks. In tx stream, two chunks for status message, eight
chunks for samples from analog 1-8 input, two chunks for mix-return.
In rx stream, two chunks for control message, two chunks for main 1-2
output, two chunks for phone 1-2 output, two chunks for dummy 1-2.

CIP header in tx stream includes quirks for its dbs and dbc fields.
The value of dbs field is fixed to 0x13, against its actual size.
The value of dbc field is firstly updated to 0x07 from zero, then
it's incremented continuously according to actual number of data h
blocks.

Finally, the model has own bits to disable frame fetch.

This commit uses several options to absorb the above quirks.

$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  0410b57d  bus_info_length 4, crc_length 16, crc 46461
404  31333934  bus_name "1394"
408  20001000  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c  0001f200  company_id 0001f2     |
410  00083dfb  device_id 0000083dfb  | EUI-64 0001f20000083dfb

               root directory
               -----------------------------------------------------------------
414  0004c65c  directory_length 4, crc 50780
418  030001f2  vendor
41c  0c0083c0  node capabilities per IEEE 1394
420  8d000006  --> eui-64 leaf at 438
424  d1000001  --> unit directory at 428

               unit directory at 428
               -----------------------------------------------------------------
428  0003991c  directory_length 3, crc 39196
42c  120001f2  specifier id
430  1300000f  version
434  17103800  model

               eui-64 leaf at 438
               -----------------------------------------------------------------
438  00022681  leaf_length 2, crc 9857
43c  0001f200  company_id 0001f2     |
440  00083dfb  device_id 0000083dfb  | EUI-64 0001f20000083dfb

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-18 14:50:16 +01:00
Takashi Sakamoto 2d012c65a9 ALSA: firewire-motu: use 'version' field of unit directory to identify model
Current ALSA firewire-motu driver uses the value of 'model' field
of unit directory in configuration ROM for modalias for MOTU
FireWire models. However, as long as I checked, Pre8 and
828mk3(Hybrid) have the same value for the field (=0x100800).

unit            | version   | model
--------------- | --------- | ----------
828mkII         | 0x000003  | 0x101800
Traveler        | 0x000009  | 0x107800
Pre8            | 0x00000f  | 0x100800 <-
828mk3(FW)      | 0x000015  | 0x106800
AudioExpress    | 0x000033  | 0x104800
828mk3(Hybrid)  | 0x000035  | 0x100800 <-

When updating firmware for MOTU 8pre FireWire from v1.0.0 to v1.0.3,
I got change of the value from 0x100800 to 0x103800. On the other
hand, the value of 'version' field is fixed to 0x00000f. As a quick
glance, the higher 12 bits of the value of 'version' field represent
firmware version, while the lower 12 bits is unknown.

By induction, the value of 'version' field represents actual model.

This commit changes modalias to match the value of 'version' field,
instead of 'model' field. For degug, long name of added sound card
includes hexadecimal value of 'model' field.

Fixes: 6c5e1ac0e1 ("ALSA: firewire-motu: add support for Motu Traveler")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-17 08:07:21 +01:00
Takashi Sakamoto f97a0944a7 ALSA: firewire-motu: fix construction of PCM frame for capture direction
In data blocks of common isochronous packet for MOTU devices, PCM
frames are multiplexed in a shape of '24 bit * 4 Audio Pack', described
in IEC 61883-6. The frames are not aligned to quadlet.

For capture PCM substream, ALSA firewire-motu driver constructs PCM
frames by reading data blocks byte-by-byte. However this operation
includes bug for lower byte of the PCM sample. This brings invalid
content of the PCM samples.

This commit fixes the bug.

Reported-by: Peter Sjöberg <autopeter@gmail.com>
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 4641c93940 ("ALSA: firewire-motu: add MOTU specific protocol layer")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-26 07:11:40 +01:00
Takashi Iwai 0c298bdc38 ALSA: firewire: Remove superfluous snd_info_register() calls
The calls of snd_info_register() are superfluous and should be avoided
at the procfs creation time.  They are called at the end of the whole
initialization via snd_card_register().  This patch drops such
superfluous calls.

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-06 18:11:38 +01:00
Takashi Sakamoto 3babca4555 ALSA: firewire: simplify cleanup process when failing to register sound card
In former commits, .private_free callback releases resources just for
data transmission. This release function can be called without the
resources are actually allocated in error paths.

This commit applies a small refactoring to clean up codes in error
paths.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-10 12:11:50 +02:00
Takashi Sakamoto 5b14ec25a7 ALSA: firewire: release reference count of firewire unit in .remove callback of bus driver
In a previous commit, drivers in ALSA firewire stack blocks .remove
callback of bus driver. This enables to release members of private
data in the callback after releasing device of sound card.

This commit simplifies codes to release the members.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-10 12:11:41 +02:00
Takashi Sakamoto 61ccc6f6b2 ALSA: firewire: block .remove callback of bus driver till all of ALSA character devices are released
At present, in .remove callback of bus driver just decrease reference
count of device for ALSA card instance. This delegates release of the
device to a process in which the last of ALSA character device is
released.

On the other hand, the other drivers such as for devices on PCIe are
programmed to block .remove callback of bus driver till all of ALSA
character devices are released.

For consistency of behaviour for whole drivers, this probably confuses
users. This commit takes drivers in ALSA firewire stack to imitate the
above behaviour.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-10 12:11:34 +02:00
Takashi Sakamoto 366a20d7a7 ALSA: firewire: use managed-resource of fw unit device for private data
At present, private data of each driver in ALSA firewire stack is
allocated/freed by kernel slab allocator for corresponding unit on
IEEE 1394 bus. In this case, resource-managed slab allocator is
available to release memory object automatically just before releasing
device structure for the unit. This idea can prevent runtime from
memory leak due to programming mistakes.

This commit uses the allocator for the private data. These drivers
already use reference counter to maintain lifetime of device structure
for the unit by a pair of fw_unit_get()/fw_unit_put(). The private data
is safely released in a callback of 'struct snd_card.private_free().

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-04 07:54:01 +02:00
Takashi Iwai fa84cf094e ALSA: pcm: Nuke snd_pcm_lib_mmap_vmalloc()
snd_pcm_lib_mmap_vmalloc() was supposed to be implemented with
somewhat special for vmalloc handling, but in the end, this turned to
just the default handler, i.e. NULL.  As the situation has never
changed over decades, let's rip it off.

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-18 08:24:29 +02:00
Takashi Sakamoto 6c5e1ac0e1 ALSA: firewire-motu: add support for Motu Traveler
This commit adds support for MOTU Traveler, launched in 2005, discontinued
quite before. As a result, transmission of PCM frame and MIDI messages is
available via ALSA PCM and RawMIDI/Sequencer interfaces.

This model supports sampling transmission frequency up to 192.0 kHz, and
AES/EBU on XLR interface and ADAT on optical interface. Unlike
Motu 828MkII, Windows driver can switch fetching mode for DSP, like
mute/unmute feature.

Although this commit enables high sampling transmission frequency, actual
sound from this model is not good. As long as I tested, it's silence at
176.4 kHz, and it includes hissing noise at 192.0 kHz. In my opinion, as I
reported at 3526ce7f9ba7 ('ALSA: firewire-motu: add MOTU specific protocol
layer'), timestamping on source packet header (SPH) may not still be good
for this model as well.

$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  04106505  bus_info_length 4, crc_length 16, crc 25861
404  31333934  bus_name "1394"
408  20001000  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c  0001f200  company_id 0001f2     |
410  0001f32f  device_id 000001f32f  | EUI-64 0001f2000001f32f

               root directory
               -----------------------------------------------------------------
414  0004c65c  directory_length 4, crc 50780
418  030001f2  vendor
41c  0c0083c0  node capabilities per IEEE 1394
420  8d000006  --> eui-64 leaf at 438
424  d1000001  --> unit directory at 428

               unit directory at 428
               -----------------------------------------------------------------
428  00035955  directory_length 3, crc 22869
42c  120001f2  specifier id
430  13000009  version
434  17107800  model

               eui-64 leaf at 438
               -----------------------------------------------------------------
438  000206b2  leaf_length 2, crc 1714
43c  0001f200  company_id 0001f2     |
440  0001f32f  device_id 000001f32f  | EUI-64 0001f2000001f32f

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-19 20:44:54 +02:00
Takashi Sakamoto 191ef57683 ALSA: firewire-motu: cancel chunk alignment for protocol version 2
For MOTU protocol version 2, this driver arranges the number of data
chunks to align chunks to quadlet data channel. However, MOTU Traveler
has padding bytes in the end of data block at high clock mode.

This commit removes the arrangement. Fortunately, at low and middle clock
mode, supported model for v2 protocol (828mkII) gets no influence from this
change because all of combination for data chunks are just aligned to
quadlet data channel.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-19 20:44:52 +02:00
Takashi Sakamoto 06ac0b6f8f ALSA: firewire-motu: add a flag for AES/EBU on XLR interface
MOTU Traveler supports AES/EBU on XLR interface and data block of rx/tx
packet includes two chunk for the interface. This commit adds a flag
for this purpose.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-19 20:44:50 +02:00
Takashi Sakamoto 81720c6d49 ALSA: firewire-motu: add a flag for chunks for main 1/2 out
This driver explicitly assumes that all of supported models have main data
chunk separated from chunk for analog ports. However, MOTU Traveler doesn't
support the separated main data chunk.

This commit adds a flag for the separated main data chunk.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-19 20:44:47 +02:00
Takashi Sakamoto 6c1549c4cc ALSA: firewire-motu: suppless consumption for unused element of array in stack
In MOTU firewire protocol, data block consists of 24 bit data chunks except
for one quadlet for source packet header (SPH). The number of data chunk in
a data block is different between three clock modes; low, middle and high.
When unit supports ADAT on optical interface, the data block includes some
chunks for ADAT channels. These ADAT chunks are unavailable at high mode.

This driver has local functions to calculate the number of ADAT chunks. But
They uses stack for three clock modes. This is useless for higher mode.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-19 20:44:45 +02:00
Joe Perches 6a73cf46ce sound: Use octal not symbolic permissions
Convert the S_<FOO> symbolic permissions to their octal equivalents as
using octal and not symbolic permissions is preferred by many as more
readable.

see: https://lkml.org/lkml/2016/8/2/1945

Done with automated conversion via:
$ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...>

Miscellanea:

o Wrapped one multi-line call to a single line

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-05-28 11:27:20 +02:00
Linus Torvalds a9a08845e9 vfs: do bulk POLL* -> EPOLL* replacement
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11 14:34:03 -08:00
Al Viro 680ef72abd sound: annotate ->poll() instances
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-27 16:20:02 -05:00
Ingo Molnar 8c5db92a70 Merge branch 'linus' into locking/core, to resolve conflicts
Conflicts:
	include/linux/compiler-clang.h
	include/linux/compiler-gcc.h
	include/linux/compiler-intel.h
	include/uapi/linux/stddef.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07 10:32:44 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00